Related
hi.
Just bought a LG GM750 , but it contains German Firmware/rom (Windows Mobile).
Does anyone knows how to upgrade to the Dutch firmware? English firmware would be okay too..
I have found a thread in this forum, but I can't find anything about a new rom.
Thnx in advance!
Dutch kdz file for LG GM750 Layla
You can check-out a Dutch kdz file ( firmware needed for flashing) at:
handy-faq.de/forum/lg_gm750_layla_forum/97996-lg_gm750_layla_firmware_download
( add the www-prefix and append ".html" in your adress bar after copying this. I'm not allowed to submit urls here...)
Please keep me posted on your progress!
( I am not a dare-devil, I do hesitate to execute the flashing process until now ...)
Cheers/ Met vriendelijke groet
/R
RonaldH said:
You can check-out a Dutch kdz file ( firmware needed for flashing) at:
handy-faq.de/forum/lg_gm750_layla_forum/97996-lg_gm750_layla_firmware_download
( add the www-prefix and append ".html" in your adress bar after copying this. I'm not allowed to submit urls here...)
Please keep me posted on your progress!
( I am not a dare-devil, I do hesitate to execute the flashing process until now ...)
Cheers/ Met vriendelijke groet
/R
Click to expand...
Click to collapse
Any instructions for the english rom would be appreciated!!!
Thanks!
you have explained here
//forum.gsmhosting.com/vbb/f177/lg-gm750-language-solution-949998/
try to find in google or just edit link with http:
http://forum.xda-developers.com/showthread.php?t=624367
harryal said:
Any instructions for the english rom would be appreciated!!!
Thanks!
Click to expand...
Click to collapse
First you need to have active sync.
Then install lg the usb modem driver here:
***.lg-phones.org/lg-incite-usb-drivers-download.html
Then You need to enter the Emergency download mode by turn off the phone, press and hold Decrease Volume (left side of the phone ) and Multitask key ( Right side of the phone ) at same time and then put USB in your phone.
Then you have to Download the flasher and english rom:
The flasher: h**p://rapidshare.com/files/362390744/KDZ_FW_UPD.zip
And the rom: h**p://rapidshare.com/files/362390741/V10F_00.kdz
When you start KDZ_FW_UPD.exe program is active but not 100% so
you start the Windows Enable.exe and it will show up down in your taskbar where clock is.
Click it and it will show ON so you can use flasher.
In first tab select 3GQCT - SmartPhone(WM) that is for LG GM7500 because it uses 3G network.
In Thirt Tab select WWE ROM from prentix link.
Afther that click on ????????????????????????????????
Wait few minutes and you will have LG GM750 on english.
slaaaave said:
First you need to have active sync.
Then install lg the usb modem driver here:
***.lg-phones.org/lg-incite-usb-drivers-download.html
Then You need to enter the Emergency download mode by turn off the phone, press and hold Decrease Volume (left side of the phone ) and Multitask key ( Right side of the phone ) at same time and then put USB in your phone.
Then you have to Download the flasher and english rom:
The flasher: h**p://rapidshare.com/files/362390744/KDZ_FW_UPD.zip
And the rom: h**p://rapidshare.com/files/362390741/V10F_00.kdz
When you start KDZ_FW_UPD.exe program is active but not 100% so
you start the Windows Enable.exe and it will show up down in your taskbar where clock is.
Click it and it will show ON so you can use flasher.
In first tab select 3GQCT - SmartPhone(WM) that is for LG GM7500 because it uses 3G network.
In Thirt Tab select WWE ROM from prentix link.
Afther that click on ????????????????????????????????
Wait few minutes and you will have LG GM750 on english.
Click to expand...
Click to collapse
Sucessfully flashed ! I was little scared after KDZ Updater finished, ActiveSync showed some weird error (something about problems with connection to phone). But everything is OK.
have firmware in Portuguese Brazil this model is that cell. KDZ?
slaaaave said:
First you need to have active sync.
Then install lg the usb modem driver here:
***.lg-phones.org/lg-incite-usb-drivers-download.html
Then You need to enter the Emergency download mode by turn off the phone, press and hold Decrease Volume (left side of the phone ) and Multitask key ( Right side of the phone ) at same time and then put USB in your phone.
Then you have to Download the flasher and english rom:
The flasher: h**p://rapidshare.com/files/362390744/KDZ_FW_UPD.zip
And the rom: h**p://rapidshare.com/files/362390741/V10F_00.kdz
When you start KDZ_FW_UPD.exe program is active but not 100% so
you start the Windows Enable.exe and it will show up down in your taskbar where clock is.
Click it and it will show ON so you can use flasher.
In first tab select 3GQCT - SmartPhone(WM) that is for LG GM7500 because it uses 3G network.
In Thirt Tab select WWE ROM from prentix link.
Afther that click on ????????????????????????????????
Wait few minutes and you will have LG GM750 on english.
Click to expand...
Click to collapse
I have tried this but nothing happens. i really need a solution for this please help
Hi everyone,
I got F240L for about 2 months.
Got software problem last months from a post http://forum.xda-developers.com/showthread.php?t=2380374
Repair to some phone shop, he got no clue neither. Left my phone in CWM.
So, I use KDZ Updater + download KDZ file from pan.baidu.com (get it to work again).
I got curious, so I install Dungeon Hunter 4 again. Again, software problem occurs, even I uninstall the game. KDZ Updater and LG Mobile Support Tool left my phone stuck in U+ LTE logo.
Browse the web, then I read someone whose using LG Flashtool (it need DLL and TOT file) to flash the phone.
Search those two files every web, finally got it.
LG Flashtool step by step guide http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment), this file has the same size for F240K and F240S, so it must be compatible for F240L, F240S, F240K.
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
NB : After 600 seconds flashing progress using LG Flashtool, don't put your phone in LG SOFTWARE MODE. Somehow, the phone got it reboot in DOWNLOAD MODE, and LG Flashtool will reflash your phone for the 2nd time (start from 1% progress again).
It not work with Hard Brick (black screen). tried it, not success.
khengvantha said:
It not work with Hard Brick (black screen). tried it, not success.
Click to expand...
Click to collapse
has anyone started to jtag fix the hard brick yet ??
Hard brick issue
Sorry, I'm also a noob here.
Can your phone go to DOWNLOAD MODE ?
I read on hongkong website (got it translate from google) 2 weeks ago, someone already try LGNPST, KDZ Updater, R&D Tool, LG Mobile Support Tool, still didn't work. The other guy recommend that you should have it fix by LG guy in Korea, or use JTAG device.
I even don't know what JTAG device is.
Maybe someone in this forums can explain you how.
Sorry if my word can be misleading.
I'll update the thread to delete the word "Hard Brick"
You are a wonderful and creative
It has succeeded with me
Glad could help.
In the mean time, enjoy this super AWESOME phone.
chimmot307 said:
Glad could help.
In the mean time, enjoy this super AWESOME phone.
Click to expand...
Click to collapse
Hi I'm stuck man. Having problems with maps and so I reset now the phone stays in CWM try to reboot but back to CWM. Cant flash rom from sd card or external card. PLease help.
Where did you download KDZ files etc?
chimmot307 said:
Hi everyone,
I got F240L for about 2 months.
Got software problem last months from a post http://forum.xda-developers.com/showthread.php?t=2380374
Repair to some phone shop, he got no clue neither. Left my phone in CWM.
So, I use KDZ Updater + download KDZ file from pan.baidu.com (get it to work again).
I got curious, so I install Dungeon Hunter 4 again. Again, software problem occurs, even I uninstall the game. KDZ Updater and LG Mobile Support Tool left my phone stuck in U+ LTE logo.
Browse the web, then I read someone whose using LG Flashtool (it need DLL and TOT file) to flash the phone.
Search those two files every web, finally got it.
LG Flashtool step by step guide http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment), this file has the same size for F240K and F240S, so it must be compatible for F240L, F240S, F240K.
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
NB : After 600 seconds flashing progress using LG Flashtool, don't put your phone in LG SOFTWARE MODE. Somehow, the phone got it reboot in DOWNLOAD MODE, and LG Flashtool will reflash your phone for the 2nd time (start from 1% progress again).
Click to expand...
Click to collapse
Could you please provide instructions on how to use KDZ updater? Where did you download it from or if you could PM? thanks
I'm downloading software via LG Mobile support but at the moment its going to take 30hrs!!
KDZ updater & LG Mobile Support Tool won't help.
You need to download LG Flashtool 1.5 is the latest version on the link that on #1 post. Once you download, follow the procedure how to install the LG Flashtool.
LG Flashtool needs 2 files (DLL & TOT) to flash your phone.
You can download DLL file from the attachment on #1 post. The attachment is compressed in RAR format. You can extract it using Winzip, Winrar, or 7zip.
The TOT file is on the 2 link #1 post (chinese website & optimus forums). You need to download the approriate type according to your phone (F240L, F240K, F240S) each files about 2 GB size. I suggest you use any download manager, to prevent disconnect from bad interference or time out. I can't post the TOT file here too due to slow network in my country (Indonesia) .
After you collect those DLL & TOT files, here's step by step :
1. Disconnect any internet connection
2. Set the computer time before Juli 15th, 2012 ( I set March 1st, 2012)
3. Double click LG Flashtool. Username, password, and Registration key are on the link #1 post
4. Insert DLL file in DLL column. Browse to where you put the DLL file.
5. Insert TOT file in Software column. Browse to where you put the TOT file.
6. Click OK
7. Click the GEAR icon, set only port #1 that ticked. Other ports are UNTICKED. Click OK.
8. Press & hold volume UP and DOWN, while connecting the USB cable to your computer (set to DOWNLOAD MODE). Until the phone shows "DOWNLOAD MODE" on the center of the screen.
9. Open System Properties. Set COM port for LG Handset using port 41.
10. Click Arrow Right in LG Flashtool, disconnect USB cable for 5 seconds. Reconnect USB cable.
11. The FLASH process in progress, wait for 600 seconds and shows green background say "PASS".
12. Disconnect USB cable and close the LG Flashtool application.
13. Release the battery, wait for 3 minutes.
14. Do FACTORY RESET in SETTINGS. End of FLASHING process.
Enjoy !!!
Thanks for that very clear instructions.
Sent from my LG-F240L using Tapatalk 2
I need LGE988.DLL. Can any one help?
chimmot307 said:
Hi everyone,
I got F240L for about 2 months.
Got software problem last months from a post http://forum.xda-developers.com/showthread.php?t=2380374
Repair to some phone shop, he got no clue neither. Left my phone in CWM.
So, I use KDZ Updater + download KDZ file from pan.baidu.com (get it to work again).
I got curious, so I install Dungeon Hunter 4 again. Again, software problem occurs, even I uninstall the game. KDZ Updater and LG Mobile Support Tool left my phone stuck in U+ LTE logo.
Browse the web, then I read someone whose using LG Flashtool (it need DLL and TOT file) to flash the phone.
Search those two files every web, finally got it.
LG Flashtool step by step guide http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment), this file has the same size for F240K and F240S, so it must be compatible for F240L, F240S, F240K.
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
NB : After 600 seconds flashing progress using LG Flashtool, don't put your phone in LG SOFTWARE MODE. Somehow, the phone got it reboot in DOWNLOAD MODE, and LG Flashtool will reflash your phone for the 2nd time (start from 1% progress again).
Click to expand...
Click to collapse
It's asking to sign in before downloading file. Any other links for firmware!
riz157 said:
It's asking to sign in before downloading file. Any other links for firmware!
Click to expand...
Click to collapse
Almost there but message keeps showing download error?
chimmot307 said:
Hi everyone,
I got F240L for about 2 months.
Got software problem last months from a post http://forum.xda-developers.com/showthread.php?t=2380374
Repair to some phone shop, he got no clue neither. Left my phone in CWM.
So, I use KDZ Updater + download KDZ file from pan.baidu.com (get it to work again).
I got curious, so I install Dungeon Hunter 4 again. Again, software problem occurs, even I uninstall the game. KDZ Updater and LG Mobile Support Tool left my phone stuck in U+ LTE logo.
Browse the web, then I read someone whose using LG Flashtool (it need DLL and TOT file) to flash the phone.
Search those two files every web, finally got it.
LG Flashtool step by step guide http://forum.gsmhosting.com/vbb/f177/lg-flash-tool-free-no-need-b2b-user-pass-1628819/index2.html
And got LGUP_GKV.DLL from extracting F240L10t_00.kdz from pan.baidu.com (see attachment), this file has the same size for F240K and F240S, so it must be compatible for F240L, F240S, F240K.
And got TOT file from http://www.gaojituan.com/thread-90-1-1.html or http://optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679
I hope this solution might help someone who ever got this problem.
NB : After 600 seconds flashing progress using LG Flashtool, don't put your phone in LG SOFTWARE MODE. Somehow, the phone got it reboot in DOWNLOAD MODE, and LG Flashtool will reflash your phone for the 2nd time (start from 1% progress again).
Click to expand...
Click to collapse
Thanks for that when I try it I get message download fail in red? What I'm I doing wrong?
It goes to 100% then download fail. I think you faced similar issue not sure what I'm doing wrong.
You need to follow step #9
This is LGE980 DLL http://forum.xda-developers.com/showthread.php?t=2302660
Tot file download
chimmot307 said:
KDZ updater & LG Mobile Support Tool won't help.
You need to download LG Flashtool 1.5 is the latest version on the link that on #1 post. Once you download, follow the procedure how to install the LG Flashtool.
LG Flashtool needs 2 files (DLL & TOT) to flash your phone.
You can download DLL file from the attachment on #1 post. The attachment is compressed in RAR format. You can extract it using Winzip, Winrar, or 7zip.
The TOT file is on the 2 link #1 post (chinese website & optimus forums). You need to download the approriate type according to your phone (F240L, F240K, F240S) each files about 2 GB size. I suggest you use any download manager, to prevent disconnect from bad interference or time out. I can't post the TOT file here too due to slow network in my country (Indonesia) .
After you collect those DLL & TOT files, here's step by step :
1. Disconnect any internet connection
2. Set the computer time before Juli 15th, 2012 ( I set March 1st, 2012)
3. Double click LG Flashtool. Username, password, and Registration key are on the link #1 post
4. Insert DLL file in DLL column. Browse to where you put the DLL file.
5. Insert TOT file in Software column. Browse to where you put the TOT file.
6. Click OK
7. Click the GEAR icon, set only port #1 that ticked. Other ports are UNTICKED. Click OK.
8. Press & hold volume UP and DOWN, while connecting the USB cable to your computer (set to DOWNLOAD MODE). Until the phone shows "DOWNLOAD MODE" on the center of the screen.
9. Open System Properties. Set COM port for LG Handset using port 41.
10. Click Arrow Right in LG Flashtool, disconnect USB cable for 5 seconds. Reconnect USB cable.
11. The FLASH process in progress, wait for 600 seconds and shows green background say "PASS".
12. Disconnect USB cable and close the LG Flashtool application.
13. Release the battery, wait for 3 minutes.
14. Do FACTORY RESET in SETTINGS. End of FLASHING process.
Enjoy !!!
Click to expand...
Click to collapse
PLZ TELL ME HOW CAN I DOWNLOAD TOT FILE baidu is not working
You can download from http://www.gaojituan.com/thread-90-1-1.html or http://optimusforums.com/threads/f240-optimus-g-pro-firmware-downloads.7679/
Click on the latest TOT file according to its date and your phone (F240L, F240S, F240K).
I've test on F240L v10i from http://www.gaojituan.com/thread-90-1-1.html works very well on pan.baidu.com.
Which file are you try to download ? Which phone do you use ?
I tried the procedures you guys mentioned above, but my phone does not seem to be being flashed.
Everything seems alright, up until disconnect the USB cable and wait for 5 secs to reconnect, but after reconnect, nothing happen....
mine is F240S, does it matter? How do I extract DLL from TOT or KDZ files?
Thanks in advanced
Dennis
---------- Post added at 11:01 PM ---------- Previous post was at 10:23 PM ----------
I actually finally got it flashed, all the procedures are correct, just need to time that 5 secs accurately.
Also, anyone with F240S needs to stay with the version of Flashtool that OP provided, any version higher than 1.4 seems giving me error.
Thanks very much for the info.
Dennis
Please help...
Guys plzzz help... I have F240s. first i was rooted on stock and then flashed cwm along with loki patch file (easy-cwm-f240s.zip file). i wanted EDGE on my
phone (i m in pakistan and only gprs works here on this phone) so i flashed panama rom by flash tool but lost the signal service.. i Wiped system,data,cache in CWM and restored data of my stock
rom from CWM but still no signals ( mobile model was still showing up e980h from panama rom) then i factory reset and flashed Cm 10.1 of f240s (i think i may have wiped system ,cache and date before it). now when i power on, LG logo appears on screen and in left top side it says:
Secure booting Error
Cause: boot Certification Verify
unfortunately i also had below 30% battery when i flashed cm10.1. NOW if i go to download mode and use mobile support tool
and flash tool to update it says: battery level is low and upgrade is unavailable, fully recharge ur battery and try again.
I Have used a battery stand charger to charge for 3 hrs but after checking phone software setting for 3,4 minutes it still says the same thing about battery again n again. should i let it charge to 100% no
matter how long it takes and then try or do something elsee... plzzz helppp
Hello, my lg is found on the block lg logo because of the deletion of the system partition.
I wonder if a KDZ file was available for lg g4 ( H815 )
the TWRP and unavailable , fastboot mode also but I can just put in download mode.
Lg software update tools do not work.
Do you want my IMEI ?
Help me please
dydyfr said:
I wonder if a KDZ file was available for lg g4 ( H815 )
Click to expand...
Click to collapse
http://downloads.codefi.re/autoprime/LG/LG_G4/H815/H81510B
Thank you a lot! It is restarted , I'm too happy
Thank you the XDA team!
very strong
the link no function. please link one firmware kdz.
how do u get into download mode?
i keep trying different ways but when i hold the volume up button and plug it to the computer it only shows me the IMEI number..
anyone?
transfer8 said:
how do u get into download mode?
i keep trying different ways but when i hold the volume up button and plug it to the computer it only shows me the IMEI number..
anyone?
Click to expand...
Click to collapse
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
gab2390 said:
the link no function. please link one firmware kdz.
Click to expand...
Click to collapse
Yes indeed the link is not working at the moment .
I'll post it on mega tonight ... :good:
dydyfr said:
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
Click to expand...
Click to collapse
wohoo thanks man! worked perfectly
Hello,
Here is the link to KDZ file can flash with flash tool lg 2014
V10B LGH815 :good:
http://lg-phone-firmware.com/index.php?id_mod=195
my phone hangs on lg logo. trying to reinstall kdz. but it keeps giving me error after 10% with s/w upgrade. please help (lg g4 h815)
plz bro hlep me flash setup compalet but sill to restart on logo
dydyfr said:
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
Click to expand...
Click to collapse
plz bro hlep me flash setup compalet but sill to restart on logo
Thank you , it works perfectly
The pad is stuck at Download mode/logo ( turn it on , it goes to download mode, plugin computer without Vol up , also goes into download mod )
I already tried the lg flash tool 2014 tool with kdz file and it got server disconnection error after extraction.
With the offical LG Mobile tool (it can detect correct model ) which downloads 1.4GB, it fails after finish dowloading/extraction
The only method I have not tried is the TOT file which I cant find it for free . And I am not sure if I bought the file , it would fix .
So, does anyone get any idea about what happens ? bad / dead flash rom ? bad usb port ? etc. ?
Is there a way to force flash with diff TOT file like with V510 ?
TIA
The "Server disconnection" error dialog and other error dialogs are common and normal. 99.9% of the time if you totally ignore any error dialog, don't press any buttons in the dialogs, just at the most drag them out of your way and ignore them, then on the VK810, within 20 minutes I find that my VK810 is successfully flashed.
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
When I run LGUP it says Model is Unknown, then gives an error telling me I have to choose a known Model. Drivers are installed, USB debugging is enabled, not sure what else there is missing. Please help.
my phone: (T-Mobile lg g3 d851 30e)
dricialg said:
error Unknown model.!!
my phone: (g3 d851 30e)
Click to expand...
Click to collapse
sorry you had problems
the error is one of the drivers lg
you should plug it into one of the main USB ports on your PC.
or rather entering device manager and re-assign drivers to ports.
Have you downloaded the lgup for lg g3 and g2?
Drivers are installed, USB debugging is enabled, LG PC Suite OK.not sure what else there is missing.
Download : lgup-g2-g3.zip
Solve it FIX
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
that includes cloudy fa's roms
minicm94123 said:
It has taken me many days to find a tool to flash KDZ AND TOT since many people show an error at 4% of FlashTool and there is no solution so this is your Post.
LGUP is a tool used by Lg for phones that still have a guarantee such as a system error or a software error.
Compatible with Windows vista/7/8/10 No macOS No Linux
Thanks to DroidTH for giving me a link
ok let's start
Renember: All will be erased in the internal memory.
Your warrantly is now avoid
Visit [How-to] Flash firmware KDZ G2 G3 G4 by LGUP On Youtube to the link
Remember that it is not channel advertising, it's just that I can not add external links
Steps to follow
Make sure you have the drivers installed correctly
Download The KDZ / TOT
Connect Lg g3 to pc (No need to enter download mode manually)
Unzip (LGUP-G2-G3.ZIP)
First install (LGUP_8974_DLL_Ver_0_5_CODEFIRE)
Second Install (LGUP_Install_Ver_1_14_3)
Enter the LGUP program that is probably hosted on your desktop
Select the Upgrade box and select the KDZ / TOT file
Wait for the process to finish (Do not disconnect the phone)
At 80% the phone will restart (not yet to be disconnected)
When you reach 100% the phone must have turned on or starting on the TMO logo
If it does not start
-------------------------------------------------- -------------------------------------------------- ----
If it does not start
---------------------------------------------- -------------------------------------------------- -----
If it restarts constantly and does not enter the system (It restarts before reaching the optimizing application)
Turn off the phone completely and remove the battery
Wait 10 seconds. And put it back
Press Vol- and on when logo is released and press them again.
Give you everything
EYE: all files on the internal SD card will be erased
A factory reset will be made and then it must be turned on normally.
If it still does not start, remove the chip (SIMCARD)
Well that's all if you have any questions please write
Sorry if I needed something, it's just that I'm new and I do not know anything about xda
I hope you understand.
Click to expand...
Click to collapse
Where are downloads
minicm94123 said:
good after I found the problem LGUP
roms apparently change the model of the device as it changes cm11 to build Cyanogenmod 11 xx
AOSP - to AOSP rom 2 etc.
the solution would be to install a stock rom clean no matter if v10 v30 etc. The important thing is not having changed the model number and manufacturer.
I hope I have helped and sorry
Click to expand...
Click to collapse
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
raf1978 said:
Hi !
How do I do all the above ?
My PC recognize the phone without problem, but LGUp won't start unless I "select a known model"... (LGUp window shows : Model = Unknown ; COM Ports = [COM5, CloudyG3] )
Problem is that my phone is softbricked after installing a new ROM, and I can only enter download mode (not even recovery). I just want to downgrade it and reflash a LG's stock ROM (or whatever ROM that would make my phone actually work !!! )
Can you help me do that ?
Click to expand...
Click to collapse
Do you still wanting help?
minicm94123 said:
Do you still wanting help?
Click to expand...
Click to collapse
YEEEESSSSSS !!!!
Please.... ?
(My phone is currently used as a toy by my 6 yo daughter ? )
LGUP "UNKNOWN" and FlashTool failure with LG G3 (and possibly others)
When I downloaded and installed LGUP with the DLL installer stated to be for the LG G3, the program did not recognise the phone, reporting it as "UNKNOWN". The LG FlashTool also failed, reporting the IMEI and PID as NULL. After spending a lot of time on this, I twigged that the DLL file in the LGUP model directory was for the 8994 processor; but the G3 has an 8974, quite different and incompatible. I located the DLL installer MSI file for 9874 devices, uninstalled LGUP and the DLLs from Windows add/remove programs, ran the 9874 DLL installer and reinstalled the LGUP program, and everything worked.
The file is, amongst other places, on https://uptoandroid.com/download-lg-up-tool-for-lg-smartphone-latest/. Do not download DLL files for LG G4, LG V10, LG G3, LG Stylo, filename LGUP_Common_DLL_Ver_1_0_28_5 .msi, but instead For LG phones based on Qualcomm Snapdragon 800 MSM8974 SoC, filename LGUP_8974_DLL_Ver_0_5.msi:.
HTH
23 Aug 19: I find that I've rediscovered the wheel. Exactly what I said was posted in 2016 - if I'd found it, it would have saved me a lot of time!