Related
hi guys
i have mda pro (PU10) from t-mobile germany need help. i wan't to update to english lang. please tell me wich file need to use. please tell me correct file name. my phone info
MDA Pro T-Mobile
ROM date 08/23/05
ROM 1.12.43GER
RADIO 1.00.02
ExtROM 1.12.127GER
please help me
thanks a lot
hi guys
please help me. now my phone dead only show usb v1.0 and nothing. i'm use this soft:
UNI_TMUK_12032_120_10600_Ship
i'm use reset button no result. please help me. wich file need to use
thanks a lot
hi guys
please help me. now my phone dead only show usb v1.0 and nothing. i'm use this soft:
UNI_TMUK_12032_120_10600_Ship
http://t-mobile.iris-global.com/download_manager_mda_pro.html
i'm use reset button no result. please help me. wich file need to use
thanks a lot
help meeeeeeeeeeeeeeeeeeeeeeeeeeeeee
The latest English ROM is Dopod 1.30.111 WWE(World Wide English) with latest Radio 1.11.00. The second is Qtek 1.30.77 WWE with Radio 1.09.00. They all can download at ftp.xda-developers.com/Universal with user name:xda and password:xda. But, read the detailed instructions before upgrading at http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Upgrading your device with different ROM wil show you Country ID error and use the program instead at http://forum.xda-developers.com/download.php?id=9885
hi man
thank you for reply mail. i'm find here: http://forum.xda-developers.com/viewtopic.php?t=42743&postdays=0&postorder=asc&start=175
http://forum.xda-developers.com/viewtopic.php?t=42743&postdays=0&postorder=asc&start=125
tell you result later
thanks a lot
hi guys
i have same problem. after update to UNI_QTEK_13077_176_10900_WWE_Ship
my phone not turn on. please help me
how resolve my problem thanks a lot
mrijnvis said:
i had the same with earlier updates. connect the device in a usb port not a hub, remove all cards, sim and memory
update ( maybe 2x because of language fault) then soft reset
in your case, maybe re update 1.09 then softreset
Click to expand...
Click to collapse
I had the same problem with a German T-mobile MDA PRO from Ebay and first think i did was to try and change the language.
First attempt went wrong and the phone would not turn on, but i flashed it again and all was OK.
I think the fault is the way you flash it. I discovered you must follow some important steps.
If the upgrade is a standalone file you must extract the firmware files in a directory like C:\flash (using winrar for example) where you can do the following:
1. Find MaUpgradeUt_noID.exe and later use it to flash, DO NOT USE ROMUpgradeUt.exe.
2. Edit RUU.conf and add [CHECKCEID_TYPE]=1 at the end.
3. Put the phone in bootloader mode (bootloader mode is where it shows usb on top and v1.0 at the bottom, so your phone is allready there)
4. connect usb cable (do not use a usb hub, plug directly on the computer).
5. Run MaUpgradeUt_noID.exe, and ----VERY IMPORTANT---- after the first screen when it displays the firmware version you are about to flash (it does not detect the version on the phone) WAIT 10 SECONDS. Then press continue, and wait for 20 minutes until it finishes.
Hope you make it...
HI MAN
I'M USE YOUR SOLUTION. BUT NO RESULT. ONLY SHOW BOOT MODE. SOFT CAN'T DETECT MY OLD SOFT VERSION. ONLY SHOW NEW SOFT VERSION. OTHER SOLUTION HAVE??? HELP ME
THANKS A LOT
Asxetos said:
I had the same problem with a German T-mobile MDA PRO from Ebay and first think i did was to try and change the language.
First attempt went wrong and the phone would not turn on, but i flashed it again and all was OK.
I think the fault is the way you flash it. I discovered you must follow some important steps.
If the upgrade is a standalone file you must extract the firmware files in a directory like C:\flash (using winrar for example) where you can do the following:
1. Find MaUpgradeUt_noID.exe and later use it to flash, DO NOT USE ROMUpgradeUt.exe.
2. Edit RUU.conf and add [CHECKCEID_TYPE]=1 at the end.
3. Put the phone in bootloader mode (bootloader mode is where it shows usb on top and v1.0 at the bottom, so your phone is allready there)
4. connect usb cable (do not use a usb hub, plug directly on the computer).
5. Run MaUpgradeUt_noID.exe, and ----VERY IMPORTANT---- after the first screen when it displays the firmware version you are about to flash (it does not detect the version on the phone) WAIT 10 SECONDS. Then press continue, and wait for 20 minutes until it finishes.
Hope you make it...
Click to expand...
Click to collapse
hi thanx man for the info but it didnt work for me now my phone is not coming out of bootloader mode....... what can i do now can u help me out of it. my HTC MDA T-Mobile PU10 has chinese wm6.1 installed in it. i want it to work in english. please help me out...............
Hello,
must be to reinstall the firmware.
Here is a link to the procedure:
Code:
http://forum.xda-developers.com/showthread.php?p=8674413#post8674413
I have just bought an Asus P527 with Chinese language, now I want to up rom English. Please show me the way to up rom from Chinese to English. Thank you so much!
Hint
anhvu_175 said:
I have just bought an Asus P527 with Chinese language, now I want to up rom English. Please show me the way to up rom from Chinese to English. Thank you so much!
Click to expand...
Click to collapse
Was able to track this down from the asusmobile.ru site. It´s auto translated from Google but the setBL does the trick apparently. NO GUARANTEES IT WILL WORK, USE AT OWN RISK!
At the Asus site
http://support.asus.com/download/download_item.aspx?product=12&model=P527&SLanguage=en-us
you can find the WWE rom. In first instance, the update on another language was refused. SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable, then choose "Advanced" mode to begin flashing firmware. That's all.
Perhaps you can ask some Russian developers over here like GreatVK or Sorg to confirm this.
PS. I´m thinking about buying this phone too. Can you comment on the use of it?
It's very useful with the keyboard, you can type text message quickly as a Nokia phone. But I really don't like chip Ti-Omap (run slowly). Battery and screen display are very good.
anhvu_175 said:
It's very useful with the keyboard, you can type text message quickly as a Nokia phone. But I really don't like chip Ti-Omap (run slowly). Battery and screen display are very good.
Click to expand...
Click to collapse
Last year I've used a HTC Wizard with the same processor and it was ok, but no speed monster though. The addition of GPS and FM and the formfactor makes the switch worth it.
But, since the phone is not sold over here I have to import one from Italy, which ships with an Italian rom.
Let me know if it works, my Italian is not so good
Jerome! said:
Last year I've used a HTC Wizard with the same processor and it was ok, but no speed monster though. The addition of GPS and FM and the formfactor makes the switch worth it.
But, since the phone is not sold over here I have to import one from Italy, which ships with an Italian rom.
Let me know if it works, my Italian is not so good
Click to expand...
Click to collapse
------------------
Hi, I've found the way to up rom for asus P527, it's the same with P526.
1. Download Official ROM for you are interested in from ASUS web site
2. Backup your device
3. Check the info of the ROM on your device (under settings menù)
you need the following info:
current ROM region code (WWE, RUS, THA, etc)
Extended ROM region code (WWE, RUS, THA, etc)
4. Extract the content of the file you downloaded from ASUS web site to any folder.
5. Edit the file P527.ini file and write there the info you collected at point (3)
in first line you have to write
the current ROM region code of the device (WWE, RUS, THA, etc)
in second line write the name of the Extended ROM region code if the device (WWE, RUS, THA, etc).
7. Run P527FUU.exe and follow the instructions screen.
Hello, Does anyone can help me to Upgrade the rom from Chi to Eng because I can't read Chinese. I try like the above instruction but I can't see the rom version Code. I saw only like this " 4.12.070815.000S.TMC " in my settiing. So I don't know what word to change the P527.ini in both row. Anyone please help me about this problem.
P.S. Can anyone send the link to download the Thailand ROM to me? I'm Thai. I can't see the Thailand ROM in ASUA Thailand. I call to check with the ASUS Thai staff, they said they will not allow the different country device to upgrade to Thailand device even I ask to give the payment.
ROM WM6.1 for Asus P527 THA - Build 19214:
http://www.pdamobiz.com/forum/forum_posts.asp?TID=156434&PN=1&TPN=1
and WM6 - V4.1.23: http://dlcdnet.asus.com/pub/ASUS/Mobile_Phone/P527/V4123_WWE_THA_EXT_V106.zip
plzzz help me....
I downloaded official Firmware upgrade for my Asus P527 from Asus.com. But wen i start for the update it says "the extended ROM version of the device does not match" Extended ROM version is: V1.0.0 NA. The update procedure is also showing the same V1.0.0 NA and my phone too... plz help how can i upgrade??? And one thing more this firmware update is windows update basically?? i mean it will go to Windows Mobile 6.1??
thanx in advance
Extract any official ROM with WinRAR
Hold down, Push and Press left OK button then clic reset. View on display "IPL: Insert USB Cable"
On PC run P527FUU.exe click on top left cornel and choise "Expert mode"
Plug USB Cable then click "Update"
sorry for my bad English
After a bad flash (power cut) device is showing:
GSMFFS at 0x13000000
GSMFFS doesn't exist
Spin Forever
Use (Format All) instead
Is there a way to "force" format a rom from windows CMD?
If not what rom tool would i need?
Thanx in advance
Thanks.
anhvu_175 said:
------------------
Hi, I've found the way to up rom for asus P527, it's the same with P526.
1. Download Official ROM for you are interested in from ASUS web site
2. Backup your device
3. Check the info of the ROM on your device (under settings menù)
you need the following info:
current ROM region code (WWE, RUS, THA, etc)
Extended ROM region code (WWE, RUS, THA, etc)
4. Extract the content of the file you downloaded from ASUS web site to any folder.
5. Edit the file P527.ini file and write there the info you collected at point (3)
in first line you have to write
the current ROM region code of the device (WWE, RUS, THA, etc)
in second line write the name of the Extended ROM region code if the device (WWE, RUS, THA, etc).
7. Run P527FUU.exe and follow the instructions screen.
Click to expand...
Click to collapse
Done ! Thanks very much !( Chắc VN nhỉ)
same problem
santosru said:
After a bad flash (power cut) device is showing:
GSMFFS at 0x13000000
GSMFFS doesn't exist
Spin Forever
Use (Format All) instead
Is there a way to "force" format a rom from windows CMD?
If not what rom tool would i need?
Thanx in advance
Click to expand...
Click to collapse
hi santosru,
i am also having same problem were you able to solve it? i saw in one of your other post about pressing volume down ok and reset with lock on sends the boot loader to different mode with options for nand nor flash etc... where you able to select the options?
ppindia said:
hi santosru,
i am also having same problem were you able to solve it? i saw in one of your other post about pressing volume down ok and reset with lock on sends the boot loader to different mode with options for nand nor flash etc... where you able to select the options?
Click to expand...
Click to collapse
Here is what one can do
Put the p527 in bootloader mode and connect to PC
on yr PC open FUU.exe
Click on the upper left corner of the FUU window and select expert mode.
Now start flashing.
Yr p527 will b alive.
I hope this solves the problem
hdubli said:
Here is what one can do
Put the p527 in bootloader mode and connect to PC
on yr PC open FUU.exe
Click on the upper left corner of the FUU window and select expert mode.
Now start flashing.
Yr p527 will b alive.
I hope this solves the problem
Click to expand...
Click to collapse
Thanks hdubli, But I have already tried that it's getting stuck in format stage. Do you have any way of skipping formatting or some other way of formatting(may be in terminal mode, I am not able to goto terminal mode in asus p527 though).
GSMFSS at 0x13000000
GSM Doesn't exist
Spin Forever
Use (format All) instead. --gets stuck after this
Is any body having copy of GSMFSS.NB0 which I can flash
ppindia said:
Thanks hdubli, But I have already tried that it's getting stuck in format stage. Do you have any way of skipping formatting or some other way of formatting(may be in terminal mode, I am not able to goto terminal mode in asus p527 though).
GSMFSS at 0x13000000
GSM Doesn't exist
Spin Forever
Use (format All) instead. --gets stuck after this
Is any body having copy of GSMFSS.NB0 which I can flash
Click to expand...
Click to collapse
I found another mode in p527 by accident. If you press OK (next to volume control) camera and reset with lock keypad it goes into sd card mode with start sd init mode. Can I use this to recover my bricked phone?
santosru said:
After a bad flash (power cut) device is showing:
GSMFFS at 0x13000000
GSMFFS doesn't exist
Spin Forever
Use (Format All) instead
Is there a way to "force" format a rom from windows CMD?
If not what rom tool would i need?
Thanx in advance
Click to expand...
Click to collapse
Hi.I head the same problem and it's solution:
http://rapidshare.com/files/227192658/full.rar (WM 6.5)
1.Unpack and copy this on sd card up to 2GB
2.Put card to phone
3.Lock phone with hold switch,press OK (next to volume control) and camera together and now reset.
I hope this fix your phone.
thanks
kucza said:
Hi.I head the same problem and it's solution:
http://rapidshare.com/files/227192658/full.rar (WM 6.5)
1.Unpack and copy this on sd card up to 2GB
2.Put card to phone
3.Lock phone with hold switch,press OK (next to volume control) and camera together and now reset.
I hope this fix your phone.
Click to expand...
Click to collapse
Thanks Kucza, I had already fixed with steps shown by you and my phone is working fine. Kucza can you tell me as to which version of windows 6.5 are you using ? is this the one cooked by kalpeshmist or the russian or thai rom.
[email protected]#$%^&*()
Jerome! said:
Was able to track this down from the asusmobile.ru site. It´s auto translated from Google but the setBL does the trick apparently. NO GUARANTEES IT WILL WORK, USE AT OWN RISK!
At the Asus site
http://support.asus.com/download/download_item.aspx?product=12&model=P527&SLanguage=en-us
you can find the WWE rom. In first instance, the update on another language was refused. SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable, then choose "Advanced" mode to begin flashing firmware. That's all.
Perhaps you can ask some Russian developers over here like GreatVK or Sorg to confirm this.
PS. I´m thinking about buying this phone too. Can you comment on the use of it?
Click to expand...
Click to collapse
i'm done as u describe that SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable and then no more things happened at this time stopped by IPL:Insert USB CABLE..plz help me
with best reguards
Jerome! said:
Was able to track this down from the asusmobile.ru site. It´s auto translated from Google but the setBL does the trick apparently. NO GUARANTEES IT WILL WORK, USE AT OWN RISK!
At the Asus site
http://support.asus.com/download/download_item.aspx?product=12&model=P527&SLanguage=en-us
you can find the WWE rom. In first instance, the update on another language was refused. SetBL.exe copied to the device that launched it, the phone ask to connect the sync cable, then choose "Advanced" mode to begin flashing firmware. That's all.
Perhaps you can ask some Russian developers over here like GreatVK or Sorg to confirm this.
PS. I´m thinking about buying this phone too. Can you comment on the use of it?
Click to expand...
Click to collapse
plz help me..when i'm updating rom , USB cable disable due to my fault. when i'm power on my phone but it's too no more work..i can't power on and reset my phone, be ruined or not? ..plz drop me a little advice
Ok, this may not work for everyone but it worked for me. I CAN NOT take credit for any of the work. I can how ever offer a very sincere thank you to developers who have brought 6.5 to the P527.
Download SCHIST 21864 from http://forum.xda-developers.com/showthread.php?t=506417
use the P527FUU that is included and check both OS and GSM.
set the OS path to ????/SCHIST_21864_clean\flash.dio.nb0
set the GSM path to ????/SCHIST_21864\EXT GSM(IND)\GSM.dio.nb0
now you need your phone screen to show the IPL: USB Cable message.
turn key lock on, press in on the scroll wheel (left side of phone), press and release the soft reset button with stylus, release the scroll wheel and press the left OK button. it may take a times to get it right but you should get the IPL: screen up. (I actually have to release the scroll wheel then move it down, release and then press the OK button)
insert the usb cable, click the ???? button in P527FUU this should "fix" you.
after it's complete even if phone hangs at the blue Asus screen you can download the correct Asus flash and use the installed included from Asus in advanced mode to restore your phone to WM 6.1 for your area.
if this helps anyone let me know.
Hi,
I've a LG optimus G Korean version (F180L). I'm facing issues to update official firmware in my mobile. While I try updating firmware using LG mobile support tool , I get error 'Not enough free disk space'.It's a brand new mobile and have lot of free space. I searched the forum for resolving this issue, but I couldn't find suitable solution.
Then I tried updating the firmware using KDZ tool as per instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=1861854
I entered into software mode by power button and volume up key simultaneously and upon LG logo pressed volume down key twice and then connected the device. I got a message as in the attachment(software mode),I don't know korean hence assumed it to be software mode. Then upon flashing I got the message as in attachment(flash error).
Can someone help me flash an english firmware in my mobile.
TIA
The screen says:
This is a state for service center's backup and upgrade.
Usual users, please dont use this state and leave it by holding the power button for 8 seconds.
Something like that.
Your logs says:
Port= -1
and PHONE NOT FOUND.
I bet you didnt install the drivers properly or you didnt choose the proper port
Tim4 said:
The screen says:
This is a state for service center's backup and upgrade.
Usual users, please dont use this state and leave it by holding the power button for 8 seconds.
Something like that.
Your logs says:
Port= -1
and PHONE NOT FOUND.
I bet you didnt install the drivers properly or you didnt choose the proper port
Click to expand...
Click to collapse
Thanks mate . My win 7 laptop didn't like the phone . Tried with xp laptop and LG support tool worked like a charm.
Still I've Korean firmware only. Is it possible to flash an English firmware in this phone ? If yes , plz give me the firmware DL links if anyone have got. The DL links in firmware thread have been removed .
Sent from my Xperia S using xda app-developers app
Contemplating trying to flash .kdz to downgrade firmware and regain root. Battery life seemed better when rooted, with 50+processes frozen (Titanium) and cpu profiles set (setCPU).
Before flashing the .kdz, which PC Connection mode do you select for the device (charge only/ mtp/ lg software)?
How to flash english version on Korean model
same prob here.. trying to find some english firmware where i can flash on my korean mobile. Is it okie to flash a canada/US carrier kdz on korean version? I dont have much knowledge.. but desperate to remove korean frm my LG; some one pls let me know... i wll be very thankful//
thks in adv.
No its not ok.
There no english ROM for Korean devices yet.
Btw why just dont change the language to English in settings?
Tim4 said:
No its not ok.
There no english ROM for Korean devices yet.
Btw why just dont change the language to English in settings?
Click to expand...
Click to collapse
thanks fr ur reply much appreciated! i have already changed tht to english.. still qvoice app is in korean.. wish a voice service like tht in english
chevro1et said:
Contemplating trying to flash .kdz to downgrade firmware and regain root. Battery life seemed better when rooted, with 50+processes frozen (Titanium) and cpu profiles set (setCPU).
Before flashing the .kdz, which PC Connection mode do you select for the device (charge only/ mtp/ lg software)?
Click to expand...
Click to collapse
I didn't flash it using kdz tool, just updated firmware using LG mobile support tool and I used LG software mode for that.
Sent from my Xperia S using xda app-developers app
same problem
kathir. said:
Hi,
I've a LG optimus G Korean version (F180L). I'm facing issues to update official firmware in my mobile. While I try updating firmware using LG mobile support tool , I get error 'Not enough free disk space'.It's a brand new mobile and have lot of free space. I searched the forum for resolving this issue, but I couldn't find suitable solution.
Then I tried updating the firmware using KDZ tool as per instructions in this thread:
http://forum.xda-developers.com/showthread.php?t=1861854
I entered into software mode by power button and volume up key simultaneously and upon LG logo pressed volume down key twice and then connected the device. I got a message as in the attachment(software mode),I don't know korean hence assumed it to be software mode. Then upon flashing I got the message as in attachment(flash error).
Can someone help me flash an english firmware in my mobile.
TIA
Click to expand...
Click to collapse
dear sir,
i have also LG optimus G Korean version (F180L) - unlocked... i think... by the ebay seller but i have many U+ - this is a mobile carrier in Koreea - applications on it.
i need a "clean firmware" - is that possible?
note - for example i have both Korean and 1- 0 classical figures on the dial buttons
any help?
thanks
I tried downgrading firmware via flashing .kdz but keep getting the PORT -1 error, not sure what I'm doing wrong...
- PC running Vista
- downloaded and installed LG USB driver using LG Mobile Support Tool, message indicates successful
- turn off device, reboot into service mode (hold power + vol up)
- connect device to PC via USB
- Device Manager, no LG modem listed **I think my problem lies here somewhere?**
- run Windows Enabler as admin, click in tray so "ON" is displayed
- run KDZ_FW_UPD_EN as admin, Type = 3GQCT
- navigate to appropriate .kdz file, press "launch software update"
- unpacks .kdz, then PORT -1, DEVICE NOT FOUND error occurs
any advice or insight would be appreciated. and Happy Holidays to everyone as well!
EDIT:solved. need to put device into Download Mode. power off. insert usb. hold power/ vol up/ vol down. release buttons when Download Mode icon apperars on screen. proceed. Cheers to boakun and l0ng0ne on the ICR channel.
Hi all,
Planning on buying this LGOG, but just wanna know. Is this korean version LGOG have the limited sms characters to 80 only?
140 for english letters
chevro1et said:
I tried downgrading firmware via flashing .kdz but keep getting the PORT -1 error, not sure what I'm doing wrong...
- PC running Vista
- downloaded and installed LG USB driver using LG Mobile Support Tool, message indicates successful
- turn off device, reboot into service mode (hold power + vol up)
- connect device to PC via USB
- Device Manager, no LG modem listed **I think my problem lies here somewhere?**
- run Windows Enabler as admin, click in tray so "ON" is displayed
- run KDZ_FW_UPD_EN as admin, Type = 3GQCT
- navigate to appropriate .kdz file, press "launch software update"
- unpacks .kdz, then PORT -1, DEVICE NOT FOUND error occurs
any advice or insight would be appreciated. and Happy Holidays to everyone as well!
EDIT:solved. need to put device into Download Mode. power off. insert usb. hold power/ vol up/ vol down. release buttons when Download Mode icon apperars on screen. proceed. Cheers to boakun and l0ng0ne on the ICR channel.
Click to expand...
Click to collapse
Do you've Korean model as well? Which firmware did you flash and is that an English firmware?
Sent from my Xperia S using xda app-developers app
kathir. said:
Do you've Korean model as well? Which firmware did you flash and is that an English firmware?
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Yes, I have a Korean device, since I live in South Korea. The firmware is Korean, with language set to English. When you set the language, literally everything is translated. I downloaded the firmware from LG servers using my own IMEI prior to upgrading to the latest ota that broke root for me.
Sent from my LG-F180L using xda app-developers app
LG Optimus G F180L Korea SMS characters limit
taklukjagat said:
Hi all,
Planning on buying this LGOG, but just wanna know. Is this korean version LGOG have the limited sms characters to 80 only?
Click to expand...
Click to collapse
dear sir,
i have LG Optimus G F180L Korea model
the SMS characters limit is 80 only but the solutions are many through Google Play Magazin
i instaled Handcent SMS - very good - increase the limit to 160 characters with also may others internal options for the user and display form, shape, colours etc.
best regards
Sorry for posting off topic, does anyone here know if Korean LG Optimus G F-180L works on AT&T 3G 850/1900?
chevro1et said:
I tried downgrading firmware via flashing .kdz but keep getting the PORT -1 error, not sure what I'm doing wrong...
- PC running Vista
- downloaded and installed LG USB driver using LG Mobile Support Tool, message indicates successful
- turn off device, reboot into service mode (hold power + vol up)
- connect device to PC via USB
- Device Manager, no LG modem listed **I think my problem lies here somewhere?**
- run Windows Enabler as admin, click in tray so "ON" is displayed
- run KDZ_FW_UPD_EN as admin, Type = 3GQCT
- navigate to appropriate .kdz file, press "launch software update"
- unpacks .kdz, then PORT -1, DEVICE NOT FOUND error occurs
any advice or insight would be appreciated. and Happy Holidays to everyone as well!
EDIT:solved. need to put device into Download Mode. power off. insert usb. hold power/ vol up/ vol down. release buttons when Download Mode icon apperars on screen. proceed. Cheers to boakun and l0ng0ne on the ICR channel.
Click to expand...
Click to collapse
This works! THANK YOU SO MUCH! 정말 감사합니다!
How to flash F180 lg optimus g korean to english official firmware
chevro1et said:
I tried downgrading firmware via flashing .kdz but keep getting the PORT -1 error, not sure what I'm doing wrong...
- PC running Vista
- downloaded and installed LG USB driver using LG Mobile Support Tool, message indicates successful
- turn off device, reboot into service mode (hold power + vol up)
- connect device to PC via USB
- Device Manager, no LG modem listed **I think my problem lies here somewhere?**
- run Windows Enabler as admin, click in tray so "ON" is displayed
- run KDZ_FW_UPD_EN as admin, Type = 3GQCT
- navigate to appropriate .kdz file, press "launch software update"
- unpacks .kdz, then PORT -1, DEVICE NOT FOUND error occurs
any advice or insight would be appreciated. and Happy Holidays to everyone as well!
EDIT:solved. need to put device into Download Mode. power off. insert usb. hold power/ vol up/ vol down. release buttons when Download Mode icon apperars on screen. proceed. Cheers to boakun and l0ng0ne on the ICR channel.
Click to expand...
Click to collapse
Hi sir please tell me step by step how did you flash you LG OPTIMUS G F180 korean version. Its hard to used the korean version. I want an official English version.
baguhanx90 said:
Hi sir please tell me step by step how did you flash you LG OPTIMUS G F180 korean version. Its hard to used the korean version. I want an official English version.
Click to expand...
Click to collapse
Here is the method that I have successfully used several times.
- put device into Download Mode. power off. insert usb. hold power/ vol up/ vol down.
release buttons when Download Mode icon apperars on screen. proceed.
- Device Manager >> modems >> disable LG modem
- run Windows Enabler as admin, click in tray so "ON" is displayed
- run KDZ_FW_UPD_EN as admin, Type = 3GQCT
- navigate to appropriate .kdz file, press "launch software update"
- unpacks .kdz, writes to device. Be patient.
Click to expand...
Click to collapse
chevro1et said:
Here is the method that I have successfully used several times.
Click to expand...
Click to collapse
Sir where I can download kdz_fw_upd_en? Please post a screen shot how to do it.
Thank you very much in advance to all of you here..
Hope I can fix this asap.
Thanks..
Hi,
just bought the LG Optimus True HD LTE (this is the model name for this phone here in germany) and flashed it with CM10.1.3.
I'm thinking about to sell it again (accu drain, big display) but therefore I want to flash it back to Stock ROM (2.3.6 or 4.0.4). But I don't know where I can get 2.3.6 or 4.0.4 Stock ROM. I already wrote to LG support but no answer so far. Does someon has a download link?
olli14
olli14 said:
Hi,
just bought the LG Optimus True HD LTE (this is the model name for this phone here in germany) and flashed it with CM10.1.3.
I'm thinking about to sell it again (accu drain, big display) but therefore I want to flash it back to Stock ROM (2.3.6 or 4.0.4). But I don't know where I can get 2.3.6 or 4.0.4 Stock ROM. I already wrote to LG support but no answer so far. Does someon has a download link?
olli14
Click to expand...
Click to collapse
Download the image you want from here
Download this
After that:
1- Place the phone in Download Mode (Turn off phone, then hold volume up while plugging in USB cable)
2-In the KDZ tools folder, install msxml and run B2CAppSetup (Close the application after it has installed)
3-Run Windows Enabler as Administrator, and press the icon in the system tray to activate it. (Windows enabler allows you to click on grayed out options to unlock them in programs. You can then set the option as you normally would.)
4-Run KDZ_FW_UPD.exe. You need to set Type to 3GQCT, PhoneMode to CS_EMERGENCY, and point the KDZ file field to V10F_00.kdz or the one you downloaded.
Once these settings are enabled, hit the "Launch Software Update" button.
And there you go, back to stock !!
BTW, v10x are GB and v20x are ICS
Good Luck
Hi danilo96
On my side both links doesn't work. I'm on Google Chrom but even when I use MS Internet Explorer the links doesn't work. Do they work on your side danilo96?
olli14
olli14 said:
Hi danilo96
On my side both links doesn't work. I'm on Google Chrom but even when I use MS Internet Explorer the links doesn't work. Do they work on your side danilo96?
olli14
Click to expand...
Click to collapse
My bad, it's fixed now.
Ok
I have followed these steps
1- Place the phone in Download Mode (Turn off phone, then hold volume up while plugging in USB cable)
2-In the KDZ tools folder, install msxml and run B2CAppSetup (Close the application after it has installed)
3-Run Windows Enabler as Administrator, and press the icon in the system tray to activate it. (Windows enabler allows you to click on grayed out options to unlock them in programs. You can then set the option as you normally would.)
4-Run KDZ_FW_UPD.exe. You need to set Type to 3GQCT, PhoneMode to CS_EMERGENCY, and point the KDZ file field to V10F_00.kdz or the one you downloaded.
Once these settings are enabled, hit the "Launch Software Update" button.
Step 1 OK
Step 2 OK
Step 3 OK
Step 4 KDZ FW_UPD.exe version 1.0.4.4 is not working on my side. But KDZ_FW_UPD.exe version 1.0.54 is working. But the user windows of version 1.0.4.4 doesn't look like the user windows of version 1.0.54. So I don't know how to configure this user window 1.0.54. Can anybody help me?
olli14
Hello, my lg is found on the block lg logo because of the deletion of the system partition.
I wonder if a KDZ file was available for lg g4 ( H815 )
the TWRP and unavailable , fastboot mode also but I can just put in download mode.
Lg software update tools do not work.
Do you want my IMEI ?
Help me please
dydyfr said:
I wonder if a KDZ file was available for lg g4 ( H815 )
Click to expand...
Click to collapse
http://downloads.codefi.re/autoprime/LG/LG_G4/H815/H81510B
Thank you a lot! It is restarted , I'm too happy
Thank you the XDA team!
very strong
the link no function. please link one firmware kdz.
how do u get into download mode?
i keep trying different ways but when i hold the volume up button and plug it to the computer it only shows me the IMEI number..
anyone?
transfer8 said:
how do u get into download mode?
i keep trying different ways but when i hold the volume up button and plug it to the computer it only shows me the IMEI number..
anyone?
Click to expand...
Click to collapse
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
gab2390 said:
the link no function. please link one firmware kdz.
Click to expand...
Click to collapse
Yes indeed the link is not working at the moment .
I'll post it on mega tonight ... :good:
dydyfr said:
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
Click to expand...
Click to collapse
wohoo thanks man! worked perfectly
Hello,
Here is the link to KDZ file can flash with flash tool lg 2014
V10B LGH815 :good:
http://lg-phone-firmware.com/index.php?id_mod=195
my phone hangs on lg logo. trying to reinstall kdz. but it keeps giving me error after 10% with s/w upgrade. please help (lg g4 h815)
plz bro hlep me flash setup compalet but sill to restart on logo
dydyfr said:
1. Delete any software owned by LG . and removing drivers
2. Install only LG drivers.
3. Switch off the phone completely .
4. Press the top volume , while plugging in USB . You will be in download mode
5. Wait for the driver installation .
6. Open Lg flash tool
7. Select Kdz file.
8. Select 'normal' and start
9. select country & language = Do not touch, do ok
10. LG Mobile Support tool opens, the flash begins.
Warning = an error message may appear , do not close this message , you have to set it aside
Sorry for my bad English
Click to expand...
Click to collapse
plz bro hlep me flash setup compalet but sill to restart on logo
Thank you , it works perfectly