[Q]Need help flashing CM12 on XM SS - Sony Xperia M

After countless hours of searching over all related posts I am still confused and pretty much intimidated on the flashing aspect. From all my searching expeditions till now I managed to outline some of the points but I don't know how to move forward with them. Also I am concerned with the possibilities of getting the device unresponsive just because of my stupidity, want to gain full knowledge before going forward with the process.
So as per my findings, for installing a CFW like CM12, I require the following things,
1. Unlocked Bootloader.
The Bootloader on my XM SS can be unlocked, I did a check on that but the thing that's bugging me is the occurrence of bootloop.
Question for this point: What is the proper method to unlock the bootloader?
2. Rooted phone.
This is the step that has confused me from the beginning. Some posts mention that rooting is essential requirement to get a fully functional CFW and in some posts there is a not a single mention for the requirement of a rooted phone.
Question for this point: Is rooting essential? What is the best step by step method that you use to root your device?
3. Back up data.
I read somewhere that unlocking the bootloader erases some of the important information like the IMEI number, DRM keys and other important stuff? Also the importance of backing up data like contacts and other stuff externally.
Question for this point: How to do a proper backup? How to go on backing up contacts, whatsapp databases etc?
4. Installing a custom recovery?
Honestly I am totally confused with this topic. What does custom recovery actually do? Best custom recover for CM12?
Question for this point: How to select and install a custom recovery?
5. Adb, Fastboot drivers.
Is it essential to actually download the full adb package that google provides to develop android apps? And are fastboot drivers available for windows 8.1? Will the phone management software provided by Sony work as a driver?
Question for this point: ADB, Fastboot driver installation?
6. Flashing the CM12.
The most important step in the whole process? How to go on with this step so as to successfully flash the firmware? Restoring the backed up data?
Question for this point: Steps to properly flash the CM12?
7. Link2SD, App2SD?
Which one will you suggest and how to go on installing it?
I know that most of you will find it bothersome to answer so many questions in a single go but I intend this topic to be a guiding thread for noobs like me who are beginners that want to flash some CFW on their devices.
So all the posts that you make are really appreciated! Please link in the posts that you think will answer the questions in layman terms for everyone to understand.
Thanks for taking your time to read this thread
Have a good day! :fingers-crossed:

Can anyone please help? :crying:

1. http://forum.xda-developers.com/showthread.php?t=2484622 Follow everything he said, while using some common sense. Just to avoid you in doing so much research on some common problems I faced, :
i) If any errors occur, just close flashtool and re-open it, even if the errors continue to happen, just close and open flashtool again.
ii) You will experience bootloop and the end of the procedure, so just flash the tft http://forum.xda-developers.com/showthread.php?t=2779412
2. Just stay rooted, better safe than sorry Here's the guide: http://forum.xda-developers.com/xperia-m/general/towel-root-steps-to-root-t2789990 Understand the procedure first then continue.
3. You can export your contacts into your sim card tho, just open up the telephony app and go to contacts and open up the option or menu thingy in it (I think the icon was a 3 dot to access the options menu) and you'll see the Export/Import tab on it. You know what to do after this After root, I suggest getting the app Titanium Backup, really helpful. If possible, after the backup, move the folder to the sdcard, so it will never be lost (or to your pc, much safer).
4. Custom recovery.. well, I'm no expert but just think it this way, you're life saver when you do something wrong to your phone (and that it can still turn on, but couldn't get pass the boot animation) and provided that you had made a Nandroid backup before(a system backup). It can restore your phone back to the last time you've backuped it. This one for Stock 4.3 http://forum.xda-developers.com/xperia-m/development/recovery-philz-touch-6-41-6-xm-dual-t2795778 and this one for afteryou've installed CM12 http://forum.xda-developers.com/xpe...very-cwm-twrp-recoveries-custom-roms-t3016507
5. I'm not sure on this one, sorry:crying: ADB drivers and the fastboot drivers installed automatically for me:silly:
6. I think this video would be a bit helpful https://www.youtube.com/watch?v=DkNu0tiNro8
7. I don't know on this, I never used them. Soz :C
All the best:fingers-crossed: though my advice would be to stay Rooted for awhile before unlocking the bootloader, so you'd at least familiarize yourself with the terms that'll you'll most probably face.

The fastboot driver from google didnt work for me, use the ones from the sony bootloader unlock site. For win8.1 you need to disable signature verification to install them.

Thank you so much @AndyPhoenix9879
You are a lifesaver! I was finally able to flash CM2.1 on my Xperia M

Related

Question about rooting and installing custom roms.....

Hi guys, i'm new to doing this for Google Android as i've never owned an Android phone before. A friend of mine wanted me to do it for him because i've done iphone jailbreaking, PSP / DS hacking, installing custom roms on many mobile platforms. The only one i haven't done is Android but he feels that it's safer that i do it for him.
I owned a HTC Touch Pro and know how the process works, but it seems for Android devices, you have to "root" it first by bypass some sort of CID or SPL check??
Anyway my question is, can someone give me a rough and quick explanations on how this work for Android phones, or more specifically the HTC Desire?? My friend simply wants custom roms installed on his phone, just like how it is for the windows mobile devices like the Touch Pro or Touch Pro 2 etc.
So do i simply root it first, and then install the custom rom and that's it?? Are there any extra steps i must take as well such as updating the kernel or something??
I know for rooting, you have to create a gold card. I have found guides for those, but if anyone can give me guides on how to install custom roms or any other helpful infos that i need to them, please do. It seems it's not as easy and straightforward as it is for Windows Mobile phones........
and apparently, rooting the phone means that some apps won't be usable?? It seems there are some downsides to this as well. If anyone can give me as much info related to rooting or installing custom roms for Android devices, that would be awesome.
chaoscreater said:
Hi guys, i'm new to doing this for Google Android as i've never owned an Android phone before. A friend of mine wanted me to do it for him because i've done iphone jailbreaking, PSP / DS hacking, installing custom roms on many mobile platforms. The only one i haven't done is Android but he feels that it's safer that i do it for him.
I owned a HTC Touch Pro and know how the process works, but it seems for Android devices, you have to "root" it first by bypass some sort of CID or SPL check??
Anyway my question is, can someone give me a rough and quick explanations on how this work for Android phones, or more specifically the HTC Desire?? My friend simply wants custom roms installed on his phone, just like how it is for the windows mobile devices like the Touch Pro or Touch Pro 2 etc.
So do i simply root it first, and then install the custom rom and that's it?? Are there any extra steps i must take as well such as updating the kernel or something??
I know for rooting, you have to create a gold card. I have found guides for those, but if anyone can give me guides on how to install custom roms or any other helpful infos that i need to them, please do. It seems it's not as easy and straightforward as it is for Windows Mobile phones........
and apparently, rooting the phone means that some apps won't be usable?? It seems there are some downsides to this as well. If anyone can give me as much info related to rooting or installing custom roms for Android devices, that would be awesome.
Click to expand...
Click to collapse
basically what it is, when google made android, they locked us out of accessing system files, kinda like the windows directory on winmo fones if you get me, by rooting your fone you regain access to them system files in order to flash a rom there are 3 steps,
1) rooting (Lets us mod the system)
2) install custom recovery (Recovery is where you can flash roms and other update files)
3) get the rom you want, (copy the .zip to the root of your sd card, then just flash it via recovery)
thats it all done
thanks for your reply mate.
But i've read from a few topics that rooting is only required for branded devices, and i don't think my friend's HTC Desire is branded at all, will i still need to root his phone though?
Also, how do i install the custom recovery?? This is the first time i've learned about this, all the other guides i found were similar to how you install custom roms for Windows Mobile, just using the RUU_Flasher (something like that), it's like an automated installer that flashes your phone so you don't have to do anything else at all so it's very simple. Could you link me to the custom recovery thing you talked about??
So basically, the recovery thing is kinda like an app that you launch from Android itself, and then it'll install the rom found on the root of your memory card??
Oh and lastly, i've read something about the SPL and kernel as well, do those matter??
One question about rooting...
Is this something you do one time and it keeps forever? For example, I'm actually in android 2.1, but android 2.2 is going to be released soon. If I root my device now but I update it later to android 2.2 will be still rooted or should I root it again?
I'm asking this question because the root process needs an specific boot/ROM and updating the phone might update one or both of them, making the rooting process unavailable for the time being.
chaoscreater said:
But i've read from a few topics that rooting is only required for branded devices, and i don't think my friend's HTC Desire is branded at all, will i still need to root his phone though?
Click to expand...
Click to collapse
This is incorrect.
If the phone is unbranded, you don't need a goldcard, but you still need to "root" it to install custom ROMs.
In reality, what we call "rooting" here is a two stage process.
The first stage is to get a custom recovery on your device, which allows you to flash custom ROMs.
The second stage is to flash a ROM which allows you to gain root access to the device when in operation.
There are plenty of threads and guides on these forums that can take you through the process. IMHO, UnRevoked3 is the best solution.
Regards,
Dave
AzureusPT said:
Is this something you do one time and it keeps forever? For example, I'm actually in android 2.1, but android 2.2 is going to be released soon. If I root my device now but I update it later to android 2.2 will be still rooted or should I root it again?
Click to expand...
Click to collapse
If you install a ROM via an HTC RUU, or an OTA update, you will almost certainly lose root. So, once rooted, always flash ROMs that are pre-rooted via a custom recovery image. If you allow an HTC update to replace your bootloader, you may end up with a device that is no longer rootable by current methods.
Regards,
Dave
foxmeister said:
This is incorrect.
If the phone is unbranded, you don't need a goldcard, but you still need to "root" it to install custom ROMs.
In reality, what we call "rooting" here is a two stage process.
The first stage is to get a custom recovery on your device, which allows you to flash custom ROMs.
The second stage is to flash a ROM which allows you to gain root access to the device when in operation.
There are plenty of threads and guides on these forums that can take you through the process. IMHO, UnRevoked3 is the best solution.
Regards,
Dave
Click to expand...
Click to collapse
Ok so i basically use the UnRevoked3 app to install all that stuff on the Desire, and then put the custom rom image file on the root of my memory card, and where do i go from there?? I know i obviously have to install it but how? Will there be any apps installed on the phone by the UnRevoked3 program, and that i use the app to install the custom rom?
And btw i haven't gotten the phone yet so couldn't try this out so just wanna know exactly how this works.
Thanks for your reply btw, i appreciate it.
If you've got a custom recovery on your phone (via UnRevoked3 say), in order to install a custom ROM you need to:
a) Power down your phone
b) Power up your phone whilst holding volume down
c) Using the volume up/down keys navigate to "Recovery" and the power button to select. This will take you into your recovery image.
d) From here, you can then make Nandroid backups, flash new ROMs, wipe the device etc, etc
Regards,
Dave
foxmeister said:
If you've got a custom recovery on your phone (via UnRevoked3 say), in order to install a custom ROM you need to:
a) Power down your phone
b) Power up your phone whilst holding volume down
c) Using the volume up/down keys navigate to "Recovery" and the power button to select. This will take you into your recovery image.
d) From here, you can then make Nandroid backups, flash new ROMs, wipe the device etc, etc
Regards,
Dave
Click to expand...
Click to collapse
AHH ic ic, this is similar to hacking a PSP and install a custom firmware
ok i think i got the gist of it overall. Just one last question, what is Nandroid?? I read the FAQ on the homepage for UnRevoked3 and it mentioned something like this, or was it Nand?? I forgot, but it's one of those things that couldn't be flashed or changed permanently. I know nand is quite a common term for PSP and iPhones, so just wondering what this is for or what it means on Android...
here's an old video which shows how fake flash recovery works:
once you root your phone, you can use this procedure to flash roms:
vol down + power to enter hboot
choose Recovery option using vol buttons and power to confirm
once red triangle shows up, vol up + power, then choose apply update.zip to enter fake flash recovery
from there, you can backup your rom, wipe everything, flash new roms/radios, partition sd card...
thanks for your help, yup i got it.
But i just want to know what is Nandroid?? I read the FAQ on the homepage for UnRevoked3 and it mentioned something like this, or was it Nand?? I forgot, but it's one of those things that couldn't be flashed or changed permanently. I know nand is quite a common term for PSP and iPhones, so just wondering what this is for or what it means on Android...
btw i just watched the video and what's the difference between:
apply sdcard:update.zip
and
install zip from sd card
it's around the 0:39 on the video.
apply update.zip is to enter recovery
install zip from sd card is used to choose rom or radio from sd card to flash
nandroid backup is system image that you create prior to flashing. In case something goes wrong, you can restore your backup, and have everything as it was, without any consequences (that's how it should be in theory, to tell the truth I haven't used it yet )
djoni1980 said:
apply update.zip is to enter recovery
install zip from sd card is used to choose rom or radio from sd card to flash
nandroid backup is system image that you create prior to flashing. In case something goes wrong, you can restore your backup, and have everything as it was, without any consequences (that's how it should be in theory, to tell the truth I haven't used it yet )
Click to expand...
Click to collapse
ok but for the "apply update.zip", how is it that it enters recovery?? I thought you ARE in the recovery, and thus you get those options as shown in that video??

ZE500CL Rooting and other related stuff

It seems that few ever talk about the ZE500CL variant of the zenfone 2. I've read a whole lot of posts on rooting, unlocking the bootloader, and installing TWRP, but most do not even mention this variant.
I started this thread to collect some information about this device. I would like to know from those who have this device, what has worked for you so far, and what hasn't? I'm especially interested in finding out the 3 things mentioned above.
I've only recently bought the device, and I only rooted it (though I did first get one bootloop already). The method that worked for me is described in this thread: http://forum.xda-developers.com/zenfone2/general/root-ze500cl-z00d-t3116531
The OP of the thread linked above also said that the second method on this thread: http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 works as well.
Btw, make sure the drivers are installed, else the computer won't be able to recognize the device when it is in bootloader mode.
Installing Xposed works as well using the ADB method mentioned in the thread linked below:
http://forum.xda-developers.com/zenfone2/general/guide-to-install-xposed-installer-t3116476
I can add any info you find to the device index in the general section for the 500CL.
Djalaal said:
I've only recently bought the device, and I only rooted it (though I did first get one bootloop already). The method that worked for me is described in this thread: http://forum.xda-developers.com/zenfone2/general/root-ze500cl-z00d-t3116531
The OP of the thread linked above also said that the second method on this thread: http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 works as well.
Btw, make sure the drivers are installed, else the computer won't be able to recognize the device when it is in bootloader mode.
Click to expand...
Click to collapse
How did you fix/handle the bootloop?
Do you know if it is possible to update the phone after rooting it?
cmendonc2 said:
I can add any info you find to the device index in the general section for the 500CL.
Click to expand...
Click to collapse
Sure, that post is much more likely to be noticed than this one. Although I might not find out much. I'm a lot less daring without custom recovery. Hence this thread.
crisbal said:
How did you fix/handle the bootloop?
Do you know if it is possible to update the phone after rooting it?
Click to expand...
Click to collapse
Well, seeing that I do not have a custom recovery (bootloader is still locked), I had to do it the hard way, reflash stock rom. Good news is, apparently your userdata (installed apps+settings and internal memory) is not wiped in the process.
First, you gotta download the rom. Get it from http://forum.xda-developers.com/zenfone2/general/index-asus-zenfone-2-wip-t3149748. Although I got mine here: http://www.asus-zenfone.com/2015/03/asus-zenfone-2-stock-rom-ze500cl-ze550ml-ze551ml.html, which is the old version.
Second, go into recovery mode (from bootloader mode), and use adb sideload ("apply update from ADB") to flash the .zip downloaded before. This is described under "Flashing Zenfone 2 via ADB" on this thread: http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596
Btw, the bootloop was caused by a mistake I made, not the rooting process.
any news update in our bootloader? hope someone could work for that..
How to get rid off couldn't add widget?
crisbal said:
Do you know if it is possible to update the phone after rooting it?
Click to expand...
Click to collapse
After more than a week of feeling unsure to update mine to WW_12.16.5.118, updating it today after finish uninstalling SuperSU. This is what I have done.
1 - uninstall SuperSU from SuperSU setting - reboot.
2 - update firmware.
3 - re-root using Temporary_CWM method as describe here
Chinaphonearena said:
Method 2: Root through temporary CWM
This is a temporary CWM with the primary purpose of injecting SuperSU onto your Asus Zenfone 2. It doesn't permanently replace recovery. This process looks long, but really is bam 1,2,3 done. Just laid out step by step for the newbie.
link removed due to post count limitation
Unzip the package
Copy SuperSU.zip to the base of your SD card
Enable USB debugging (Settings > Phone info > Tap build 7x > Back button > Developer options > USB debugging)
If you don't already have ADB drivers installed, you may need to [post count restriction] and install them (most PCs have them already, but trying installing these if you're having trouble getting your PC to issue commands to the phone via USB)
With your phone on, attach it to PC via USB
Run 'cai_dat_CWM.bat' from the CWM package
In the black command window that opens, type ACCEPT
Type T4
Phone will reboot into fastboot and you'll see commands being issued from the PC cmd window copying the temporary recovery
You may see some funked up images on your display for a bit. Remove the USB cable and within 30 seconds should then see it booted into CWM
Select install update
Navigate to SuperSU.zip and install
Bam, done.
Click to expand...
Click to collapse
4 - Success!!! now my phone are rooted and all rooted apps installed previously are working.
Note: Previously (before updating FOTA) I also root my ZE500CL using Temporary_CWM since One Click root method aren't working for me.
Recover from bootfreeze while fully stock
Well, after getting a bootfreeze being on a fully (old version) stock ze500cl (Z00D), I figured out something useful. How to recover from a bootfreeze with locked bootloader, non rooted stock rom, without loosing what was saved on your internal storage.
Given that you have not messed with system files (since you aren't rooted), I'm assuming you got either corrupted userdata files or your internal storage is so full, the phone fails to even boot. I had the latter. If system files are the problem, this method might (or probably?) not work. The trick is to use tethered TWRP for backing up your internal storage.
1: Download CWM_Zenfone_2_Intel.zip here: https://www.mediafire.com/folder/w70w7r1a65840/Zenfone_2 (gotten from source 1)
2: Download Recovery.zip here: https://drive.google.com/folderview...T0xRMVRkcTg3MHdlc1o0cVFBc3RPeTQ&usp=drive_web (gotten from source 2)
3: Extract the zip from Step 1.
4: Go to the FB_RecoveryLauncher folder you have extracted, and replace the recovery.zip there with the one downloaded in Step 2.
5: Boot into your stock recovery and connect your phone to the computer. Make sure you have adb and the phone's drivers installed (gotten from source 3).
6. Run the cai_dat_CWM.bat script and you should boot into temporary TWRP recovery after a minute or so.
7. Use TWRP to copy your sdcard folder (internal storage) into your ext_sdcard folder (external storage/microsd) for the sake of backing it up.
8a. In the case of having too full internal storage, simply delete some things in there, and you should be able to boot it again.
8b. Not tested, but in case of corrupted userdata, a factory reset is probably necessary, and will solve the bootfreeze issue.
source 1: http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 (method 2)
source 2: http://forum.xda-developers.com/zenfone2/development/alpha-tethered-twrp-asus-zenfone-2-t3123532
source 3: http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596
@cmendonc2 , if you want, you can add this to your index.
Djalaal said:
It seems that few ever talk about the ZE500CL variant of the zenfone 2. I've read a whole lot of posts on rooting, unlocking the bootloader, and installing TWRP, but most do not even mention this variant.
I started this thread to collect some information about this device. I would like to know from those who have this device, what has worked for you so far, and what hasn't? I'm especially interested in finding out the 3 things mentioned above.
Click to expand...
Click to collapse
Thank you so much for providing this thread. Found it after hours of scouring the internet in search of help after somehow getting my phone locked in boot-loop. There isn't much support for the ZE500CL, but I will be posting on some blogs while I begin work on mine, and I will reference others to this thread and the few others I've found. Thanks again! :good:
Xanathide said:
Thank you so much for providing this thread. Found it after hours of scouring the internet in search of help after somehow getting my phone locked in boot-loop. There isn't much support for the ZE500CL, but I will be posting on some blogs while I begin work on mine, and I will reference others to this thread and the few others I've found. Thanks again! :good:
Click to expand...
Click to collapse
Sorry, was out of town for 3 months. Glad to be of help. You know where the thanks button is .
I should note that the this phone is now the daily driver of both my parents so I stopped tinkering with it, although I left one of them rooted (and the other not lol). So don't expect more updates from me sadly.
Djalaal said:
Sorry, was out of town for 3 months. Glad to be of help. You know where the thanks button is .
I should note that the this phone is now the daily driver of both my parents so I stopped tinkering with it, although I left one of them rooted (and the other not lol). So don't expect more updates from me sadly.
Click to expand...
Click to collapse
That's quite alright, I've had my fun with Z00D, got myself a LG V10 to break now
I dont ask for directions...
This is my first time asking questions as I have always been able to reverse-engineer (R-E) or as the hacker in swordfish would say "the code just comes to me". Ive been around computers since my dad took me to work at UT and commands were issued with punch out cards....I've been a long time android self taught enthusiast turned professional. ITT Alum etc. I research, I surf, I R-E, and I try every possible option etc...only this has me stumped. And this is the first android that has stumped me. I double checked everything but I keep getting this error in BBQLinux: I followed all pre-update instructions to the T.
fw: ATT_12.16.10.92
adb sideload
This package is not for ATT (WW)
E: Error in /sideload/package.zip
(Status 7)
yes I did with root cmd line, yes cd to zip file location, yes I verified correct fw, even tried different fw zips ZE500CL downloaded officially and from here.
I greatly appreciate any help and I do apologize for "asking for directions"
Computer John dba Austin Computer Techs
cuervo233 said:
This is my first time asking questions as I have always been able to reverse-engineer (R-E) or as the hacker in swordfish would say "the code just comes to me". Ive been around computers since my dad took me to work at UT and commands were issued with punch out cards....I've been a long time android self taught enthusiast turned professional. ITT Alum etc. I research, I surf, I R-E, and I try every possible option etc...only this has me stumped. And this is the first android that has stumped me. I double checked everything but I keep getting this error in BBQLinux: I followed all pre-update instructions to the T.
fw: ATT_12.16.10.92
adb sideload
This package is not for ATT (WW)
E: Error in /sideload/package.zip
(Status 7)
yes I did with root cmd line, yes cd to zip file location, yes I verified correct fw, even tried different fw zips ZE500CL downloaded officially and from here.
I greatly appreciate any help and I do apologize for "asking for directions"
Computer John dba Austin Computer Techs
Click to expand...
Click to collapse
?? Is that att ota youre trying to sideload? Att doesn't have fw, ze500cl does. But just unlock your bootloader, flash twrp, then install whatever, cm, aicp, custom stock or straight stock. http://forum.xda-developers.com/showthread.php?p=64991762
Sent from my MotoG3 using Tapatalk
Cool, I didn't read anywhere about unlocking BL first otherwise Ida made that "turn at the first light". We will ULO thru Asus and continue on our journey. These little Asus trinkets are little buggers being Intel based. Only line of Android devices that have ever stumped me. I am much obliged, fellow XDA brethren. Much obliged.
After pondering a little I came to this conclusion:
UL BL is basically the first step one should take when doing any kind of flashing of internal partitions be it a boot.img, recovery.img, FW etc... at least for the higher end devices. I don't recall having to do that for my sm-n900t recently. Does it only apply for flashing back to stock and not custom roms? Although I didn't have to UL BL first when I heim-dall/Odin flashed my note3 back to stock rom after being boot-looped. Cause once I did that I was able to try out a majority of custom roms available for it whether flashed thru HD/fastboot, Odin, via twrp update zip, or adb sideload. Hmmm, I might understand once I think it thru and look at all the different variables.
Good day gentlemen.
Be vewy vewy quiet, I'm hunting androids...
:good:
@cuervo233 Yes most devices you have to unlock the bootloader first. But there are some devices that already come unlocked. And then there are even some that have bootloaders that cannot be unlocked due to carrier restrictions. In order to get custom recovery to boot you must unlock the bootloader or it must come unlocked. With a custom recovery you can Flash the stock zip file from the Asus website or a custom ROM have fun
Sent from my MotoG3 using Tapatalk
Thank you. I was able to ULBL, flash TWRP, flash to ww 118, root, and now its time to explore the neat wonderful world of custom ROMs. This was by far the hardest yet. Next in line is the cricket Stylo which was also giving me hell, but now I dont think I should have any problem getting it done. I'll keep ya'll posted.:good:
Lg stylo should have way more development, have fun brother. Remember tmobile phones( cricket, walmart family mobile, and metro pcs) you can easily unlock the bootloader . att on the other hand usually has locked down bl.
Sent from my MotoG3 using Tapatalk

Newbie! Zenfone 2 now rooted...now what!

Hi all,
I have a zenfone 2 that I have just rooted....so now what?
Basically I wanted to optimise my phone so I am able to disable annoying notifications which are greyed out (although since rooting and checking this it still greyed out) I want to remove bloatware and I would actually like to customise my own android system, starting from a 'vanilla' base where I can build it up myself.
I have also read that I need to install a android recovery programme on asap after rooting.
So sorry about this but I really do need 'stupid' instructions as using hi tech words will just baffle me. lol
I have played around with computers in the past and learned about them so this is the phone stage now!
Thanks in advance and for your patience with this newbie!
Kerry
Yankeegal said:
Hi all,
I have a zenfone 2 that I have just rooted....so now what?
Basically I wanted to optimise my phone so I am able to disable annoying notifications which are greyed out (although since rooting and checking this it still greyed out) I want to remove bloatware and I would actually like to customise my own android system, starting from a 'vanilla' base where I can build it up myself.
I have also read that I need to install a android recovery programme on asap after rooting.
So sorry about this but I really do need 'stupid' instructions as using hi tech words will just baffle me. lol
I have played around with computers in the past and learned about them so this is the phone stage now!
Thanks in advance and for your patience with this newbie!
Kerry
Click to expand...
Click to collapse
Hi Kerry,
First thing you should now do after rooting your device would be flashing a custom recovery that is specific to your device (make sure your devices boot loader is unlocked first). This will allow you to make a backup of everything just in case anything were to go wrong, flash custom ROMs and useful zips. You can pick your favorite custom recovery such as Team Win Recovery Projects custom recovery (TWRP), Clock Work Mods custom recovery (CWM) or Philz Touch recovery based off of CWM although personally I would recommended twrp.
There are multiple ways to do this: Using the TWRP/CWM recovery installer from the play store or the more complicated way of flashing it from your computer. If you were to choose to install TWRP from their app on the play store (grant it root permission) you can select your device from the supported device section within the app, pick the latest recovery, hit the install button and let the app work its magic. If all works correctly you can now reboot to recovery and you will see TWRP is installed. Now you should create a backup to be on the safe side and you're good to go!
To best optimize your device I would recommend installing a custom ROM (look up custom ROMs for the Zenfone 2) and install the zip through recovery. (make sure to pick the right ROM for your device and version otherwise you may soft brick your smartphone) Now with a custom ROM you can better optimize your device and fully customize it to your liking. Make sure to look up custom ROM installation instructions for your device for better detail.
As far as removing system apps/bloatware you can use a "root app delete" tool from the play store but be careful what you remove as some applications are required!
Make sure to take your time and be careful when attempting any of these things and be careful what you modify! Just remember that no question is a stupid question as we all have to start somewhere!
Hope I was able to help you even if it was just a little, good look and have fun!
Rooted Droid Thanks you so much!!! First of all thanks for being so patient with me and secondly thanks for the useful (and easy to read) information.
I will go and install a back up on my phone from the ones you have suggested.
Hopefully you will be around over the next few days if I have more questions. Not planning on doing this all at once but rather taking the time and doing it right.
Thanks so much again!! :good::good::good:
Ooops sorry....how do I do this please?? ---> (make sure your devices boot loader is unlocked first)
Yankeegal said:
Rooted Droid Thanks you so much!!! First of all thanks for being so patient with me and secondly thanks for the useful (and easy to read) information.
I will go and install a back up on my phone from the ones you have suggested.
Hopefully you will be around over the next few days if I have more questions. Not planning on doing this all at once but rather taking the time and doing it right.
Thanks so much again!! :good::good::good:
Click to expand...
Click to collapse
Not a problem! I'm always happy to spread some knowledge and appreciate when people do the same to me! I also went ahead and checked the TWRP app and the Zenfone 2 is supported so it looks like your good to go. And yes absolutely, there's no rush so take all the time you may need and everything will go smoothly! I'm always around and will try my best to answer questions.
---------- Post added at 08:02 AM ---------- Previous post was at 07:41 AM ----------
Yankeegal said:
Ooops sorry....how do I do this please?? ---> (make sure your devices boot loader is unlocked first)
Click to expand...
Click to collapse
Check this site out:
http://myzen.asus.com/2015/10/13/official-bootloader-unlock-for-zenfone-2-is-now-available/
All devices have a different method for unlocking bootloader (some don't even have locked bootloaders) but this is an official bootloader unlocking method for the Zenfone 2 from Asus itself. I suggest following its directions and you should be able to unlock it this way.
Ok I followed the link but now I am confused. I have version ww_2.20.40.63_201......
Apparently I need a later version. What started off with just adding an APP means me doing other things before I even get to that point (hence the confusion! lol)
I never updated the phone via OTA as I was told it would invalidate my warranty and also I have killed a phone before using that so can you walk me through please...if you have the time....or could I just check if I have it unlocked already??
I haven't even gotten to the part where I create a backup...tee hee
Yankeegal said:
Ok I followed the link but now I am confused. I have version ww_2.20.40.63_201......
Apparently I need a later version. What started off with just adding an APP means me doing other things before I even get to that point (hence the confusion! lol)
I never updated the phone via OTA as I was told it would invalidate my warranty and also I have killed a phone before using that so can you walk me through please...if you have the time....or could I just check if I have it unlocked already??
I haven't even gotten to the part where I create a backup...tee hee
Click to expand...
Click to collapse
Hi sorry for the late reply, I'm in Canada so it was 2am when I was last talking to you so I went to bed haha. Anyway as far as unlocking the Zenfone 2's bootloader I wouldn't have experience unfortunately as I'm using a Nexus 5. The easiest way to go about this now would be to go to your device specific forum and find a way to unlock it there.
The following way to unlock the bootloader requires you have ADB installed on your PC. This is a guide for installation on Windows :
http://www.android.gs/install-android-sdk-adb-windows/
And here is a thread specific to unlocking the Zenfone 2 using adb:
http://www.xda-developers.com/asus-zenfone-2-bootloader-unlocked-without-asus/
BTW as you mentioned "updating may invalidate your warranty" things like rooting, installing a custom OS, unlocking the bootloader, installing a custom recovery and other things like that all (in most cases) void your warranty.
Sorry I can't personally help with the bootloader as I've not personally unlocked it on a Zenfone. Still feel free to ask any questions if you need to. Good luck!

Newbie Questions

Hey Guys,
Im new to the Android community coming across from an iPhone. I have landed myself an HTC One M8 but have no idea what to do next! (Ask me how to "Jailbreak" iPhones and I'm your guy) but the whole root process and custom ROMs are confusing me.
Basically I'm in Australia on the Telstra network (that seems to matter with rooting) and have the M8 on Android 6.0
Where is my next step? Im keen to learn but there are 100s of threads on this question and I simply don't know where to start, so for that I apologise.
Thanks in advance,
The "ConfusedOl1ve"
UnrealOl1ve
Since you're new to the forum, I'll give some (hopefully) friendly advice on posting: There is a thread sticky at the top of this section, and it says clearly "Please Read before posting" and describes what belong in this section, and questions/help requests is not one of them.
http://forum.xda-developers.com/htc-dream-g1/general/guide-to-htc-device-forums-please-read-t3234095
No need to try to change or move this thread (you can't). So I'll request to the mods to have it moved.
Now on to the real stuff. The exact process depends on what you want to do precisely, root or flash a custom ROM. Since on this device, you do not actually need to root before flashing a ROM. But some folks may want to stay on the stock ROM, but with root.
And the process for one versus the other will have some differences.
UnrealOl1ve said:
Hey Guys,
Im new to the Android community coming across from an iPhone. I have landed myself an HTC One M8 but have no idea what to do next! (Ask me how to "Jailbreak" iPhones and I'm your guy) but the whole root process and custom ROMs are confusing me.
Basically I'm in Australia on the Telstra network (that seems to matter with rooting) and have the M8 on Android 6.0
Where is my next step? Im keen to learn but there are 100s of threads on this question and I simply don't know where to start, so for that I apologise.
Thanks in advance,
The "ConfusedOl1ve"
UnrealOl1ve
Click to expand...
Click to collapse
Read these thread carefully andFollow steps to unlock your bootloader and install twrp http://forum.xda-developers.com/showthread.php?t=2699065
sayad1 said:
Read these thread carefully andFollow steps to unlock your bootloader and install twrp http://forum.xda-developers.com/showthread.php?t=2699065
Click to expand...
Click to collapse
Toolkit hasn't been updated in over a year and a half. It contains an extremely obsolete version of TWRP, which will cause issues with the OP's Marshmallow device.
Further, IMO the toolkit seeks to provide a solution for a problem which doesn't exist. The steps to unlock the bootloader, and flash custom recovery are easy to do "manually" without the toolkit. And learning to do so (for those that don't already know these skills) should be mandatory for anyone wishing to mods this phone.
Most of what the OP would need to know, is contained in Vomer's excellent guide here. Although the guide hasn't been kept up to date, so I'll provide the following caveats:
1) Follow Sections 0 and 1, to unlock the bootloader.
2) Use current version TWRP 3.0.2 from here, instead of the old version listed(and linked) in the guide. Somewhat obviously, the fastboot command used to flash TWRP will need to be changed to contain the proper file name (newer version number). Alternately, just rename the file something like twrp.img, and use that in the fastboot command.
3) Do not follow Sections 2 (S-off, SuperCID) or 3. They aren't needed for root or flashing ROMs, and the info is no longer accurate.
After that, the way to proceed depends on the 2 different paths I stated in my last post: stock ROM with root; or flash custom ROM.
Stock ROM with root: Make a TWRP backup of the stock (unrooted) ROM, then flash SuperSU. Vomer's guide automatically links to the latest stable version. But it should be noted, that the latest is SuperSU 2.78. Many folks make the mistake of using old versions SuperSU (<2.52 or thereabouts) which won't work on Marshmallow, and will result in being stuck in a bootloop.
Flash custom ROM: No need to root before flashing a custom ROM. What you do in this case:
a) Make a TWRP backup of your stock ROM
b) Backup anything you want to keep, by your method of choice (copy to computer, Titanium Backup, cloud, etc.)
c) Put the ROM on the phone
d) Boot into TWRP, select Wipe, and do the default wipe (Dalvik, Cache, and Data)
e) Select Install in TWRP, and choose the ROM to flash it.
f) Reboot and drink beer, you're done

Help Tech-Savvy NOOB get started

I have an old Sony Xperia M C1905 that I want to root/load a custom, cut-down ROM to free up space for the Apps that seem to be growing with every update. I am a NOOB (as you say) to installing custom F/W on my phone, BUT I am tech-savvy. What I need is access to a set of instructions/tools that I can use with my phone and PC combination. I realise that this is an old phone and you are trying to help, but for me it is frustrating when all the links to tools from the threads seem to be dead or don't work. Please can someone have a read and let me know a way to do this that has a set of working tools. Thanks
My PC is a MS Windows 10 laptop – If necessary, I could resurrect an old laptop and install Linux on it, if that is a simpler approach.
I have had a look at what is available and will probably load the ROM from:
https://forum.xda-developers.com/xperia-m/orig-development/rom-slim6-marshmallow-t3418258
What I think I need to do (and have tried to start) is:
1. Root the phone.
2. Backup the current ROM.
3. Unlock the boot-loader.
4. Load the Slim6 ROM.
To do 1. I have tried two methods, the first recommended from the backup thread and a second found by searching.
i. Easy Rooting toolkit: https://forum.xda-developers.com/showthread.php?t=2292598 but the download link for DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit.zip. The Download site for this tool tells me (eventually) that the file has expired or has been deleted by the owner - so i can't get this tool. Any Ideas How to get this?
ii. Also tried: https://forum.xda-developers.com/showthread.php?t=2529561 but for me, the cydia impactor tool does not see my phone or have any options. Yes, I have enabled - and allowed USB debug mode, before you ask. And yes the PC can see the phone so the connection is good.
To do 2. I am proposing to use the instructions from this thread: http://forum.xda-developers.com/showthread.php?t=2292598 Please confirm this is still valid.
iii. [Update] Also tried rooting by using this thread: https://forum.xda-developers.com/showthread.php?t=2457174 but this requires Framaroot 1.5.3, When I try and download this, the download site says: "The file link that you requested is not valid. Please contact link publisher or try to make a search."
Update 2. Managed to get a download of Framaroot, installed, but does not work for Xperia M with Android 4.3. Any idea of a way forward?
To do 3. I am proposing to use: https://forum.xda-developers.com/showthread.php?t=2484622 Please confirm this thread is still valid - and the best approach.
To do 4. https://forum.xda-developers.com/xperia-m/orig-development/rom-slim6-marshmallow-t3418258 - Please let me know if there is a more appropriate ROM to install to free up some space.
You can follow this link :
And for root, I think slim6 is pre rooted. Means in Developer options, select root for adb and apps.
What about backing up the current ROME?
Thanks for your reply, but to my understanding this just does 2. & 3. from my list. Most of the ROM installation guides say to take a backup of the current ROM so that you can restore the original system.
To do this I need to get root access with the current build. Is this now impossible?
Maybe I just need to bite the bullet and just not bother with the backup.
You should definitely take a backup.
This is because of the TA partition. As soon as you unlock the bootloader of your phone it will format the TA partition, so without the backup you won't be able to restore it which might be needed. Using a TA backup from another phone will NOT work.
So you are right about the steps, you need to root the phone, backup, unlock the boot loader and flash the new ROM. I didn't check all of the links you posted now, but if Framearoot is not working for you you might want to try out iovyroot. Also check that you downloaded the right tool to root for your Android version.
If it's still relevant and you need any additional help I'll post some instructions for you another day.
Thanks for the confirmation of the process.
Iovyroot is not a root method I have tried. I will Investigate tomorrow.
I will post back here when I have tried it.
I have tried a couple of versions of Framaroot, one recommended version for the phone, and the latest version I could find. Neither worked.
Maninfrontofpc said:
Thanks for your reply, but to my understanding this just does 2. & 3. from my list. Most of the ROM installation guides say to take a backup of the current ROM so that you can restore the original system.
To do this I need to get root access with the current build. Is this now impossible?
Maybe I just need to bite the bullet and just not bother with the backup.
Click to expand...
Click to collapse
You don't need to get root access to have a backup. Just unlock your bootloader and install cwm or twrp through fastboot and take backup with help of it. Now if you are on stock rom and you need root anyway, you can use towelroot. And then install supersu from playstore. OR flash superSU through cwm. In that case no need to install towelroot.
Is nidhoegg mistaken?
Please can you confirm that the TA partition will Be NOT be formatted when I unlock the boot loader?
Maninfrontofpc said:
Please can you confirm that the TA partition will Be NOT be formatted when I unlock the boot loader?
Click to expand...
Click to collapse
Why are you so much worried about TA partition?
My understanding is that this contains various sets of system data including: S/W signatures for the Sony Apps (if I want to restore the Sony ROM to the phone); calibration data of the various devices on the phone - accelerometer etc. So surely, even if just for the calibration data, I would not want to lose this data even if I loaded a custom ROM - I have no way of re-calibrating the devices, so would need the factory acceptance calibration values.
Am I mistaken?
TA backup for our device isn't necessary. Actually I don't know anyone from xda taking TA backup. TA backup is for newer sony devices and z series devices. In those devices, somethings like sony camera wouldn't work if you lose drm keys. It's not the case with our mobile.
Are you saying that all the threads from when this was the current phone are wrong, and I don't need to backup this partition?
TA = Trim Area; as well as holding the DRM Keys/S/W signatures, my understanding is that at contains Trim data to adjust the various sensors on the phone to read accurately. I have been led to believe that these are written during the automated Factory Acceptance Testing to adjust for small differences in the components on the phone, and are unique to the device. Surely if I lose this data the sensors will not read accurately.
Is this wrong?

Categories

Resources