Related
Managed to instal AT&T v20 stock kitkat and sb told me to:
use towelroot to root the device then install gpro rec.apk and flash rec but do not reboot to rec then install busybox and freegee-i DID THAT-was easy I quess
NOW I DON'T GET THIS:and perform cwm action after this reboot to rec and flash phillz rec and reboot again to rec and full wipe then flash any rom u want.
Help?
kamolinkaaa said:
Managed to instal AT&T v20 stock kitkat and sb told me to:
use towelroot to root the device then install gpro rec.apk and flash rec but do not reboot to rec then install busybox and freegee-i DID THAT-was easy I quess
NOW I DON'T GET THIS:and perform cwm action after this reboot to rec and flash phillz rec and reboot again to rec and full wipe then flash any rom u want.
Help?
Click to expand...
Click to collapse
Okay, first, you may want to try flash the v10g version of the stock ROM because it's the best starting point for flashing the custom ROM on lg ogp device. Follow the instructions in the link below and you should be good. I don't know why someone would tell you to use the towel root with the stock v20 rom because a lot of time it doesn't root properly. The instructions you were originally gave were to root with the towel root and then install the busy box so you can use the freegee. With the freegee you can install either cwm or twrp custom recovery. Once you have the custom recovery, reboot into the recovery and then flash philz custom recovery because it's better than the freegee's. Philz recovery is optional if you don't feel like you need it, it just has more bell and whistle, that is all. You can flash the custom ROM with either custom recovery, philz or freegee. However, I'm more concern with you trying to root with the v20 stock ROM, because you will likely run into many issues. So be sure to read the guide I give you first.
[http://forum.xda-developers.com/showthread.php?t=285432
x
Hey! thanks for the replay! I just got one helper because the rom guy didn;t want to help me so the others.Only 1 guy wanted to give me hints and I managed to install this stock rom.
So you're saying that I have wrong rom installed?
Do I have to really instal other rom or can I do it on mine but in other way to root it and process it so as to install http://forum.xda-developers.com/optimus-g-pro/development/mar-0-lollipop-g-pro-v1-t3043779 or not?
I'm all confused,just wanted to install http://forum.xda-developers.com/optimus-g-pro/development/mar-0-lollipop-g-pro-v1-t3043779
but whole day passed and nothing was done U.Ux
Read the guide I give you.
Managed to root my phone by iRoot.
Now I tried install busybox but after I hit install: "it looks like the instalation of busy box was not successful try installing to different location that may resolve the issue"....
any tips?
If you can't install the busy box, that usually has something to do with the root. That's the reason I said not to use the v20 stock ROM as the starting point. The only reason you need the busy box is the freegee, you can install the recovery without using freegee, but you have to search around XDA first because freegee opens up the boot loader, which is also the reason you can't just flash the recovery with the lg flash tool. You may have to flash v10g version of the stock ROM.
Ok I'm in philz menu.Someone said that all I need is to install(ANY) rom and kernel-how I do it? I want http://forum.xda-developers.com/optimus-g-pro/development/mar-0-lollipop-g-pro-v1-t3043779
Have you used a custom recovery before? Down load both rom and kernel installing files to a directory that you prefer, usually some where on your external sd disk. Once you get the files, go to philz recovery and press install zip, find the directory where the installing files are located, press on them, and it should install the rom. If you have never done this before, remember to factory or clean install the rom. On philz recovery, there is a function call installing a new rom under factory reset section, use that every time you're installing a new rom.
hawkwind212 said:
Have you used a custom recovery before? Down load both rom and kernel installing files to a directory that you prefer, usually some where on your external sd disk. Once you get the files, go to philz recovery and press install zip, find the directory where the installing files are located, press on them, and it should install the rom. If you have never done this before, remember to factory or clean install the rom. On philz recovery, there is a function call installing a new rom under factory reset section, use that every time you're installing a new rom.
Click to expand...
Click to collapse
PLEASE HELP!
Installed CM12.1 on my e980. And now the wifi isn't working at all. Have searched and tried some fixes but to no end. Any suggestions?
D Sami said:
PLEASE HELP!
Installed CM12.1 on my e980. And now the wifi isn't working at all. Have searched and tried some fixes but to no end. Any suggestions?
Click to expand...
Click to collapse
Have you tried clearing Cache from Recovery?
khan.orak said:
Have you tried clearing Cache from Recovery?
Click to expand...
Click to collapse
Yup, I advanced wiped my phone (TWRP) and cleared cache, dalvik and system
What's Wi-Fi doing? I notice there are issue with the modem on cm12.1 based custom rom. During the boot up, it would spent long time searching for the signal, but I never have problem with the Wi-Fi though, then again, I'm not using cm12.1 but vanir instead. However, somewhere I remember reading that someone else is having a issue with the Wi-Fi on cm12.1, and he fix it temporarily by setting up the Wi-Fi each time.
I have kitkat 4.2.2 stockbase, rooted, trying to install cwm but stuck in the secure booting error boot certification verify.
Previously i installed rom manager app and flash the cwm from the app. After reboot to recovery, only stock recovery that showed, then i reboot to system, install freegee in order to flash the cwm but fail as freegee doesnt support gpro kitkat.
After that i install gpro kitkat recovery and flash the cwm from the app, success, reboot to recovery but stuck on the error.
I uninstalled rom manager and freegee, but still no luck to get the flashed cwm recovery,stuck in secure booting error.
Any suggestion or thread reference? Why is very difficult to install custom rom on this device?i plan to install carbon rom :crying:
Thank you in advance.
hotmatua.parulian said:
I have kitkat 4.2.2 stockbase, rooted, trying to install cwm but stuck in the secure booting error boot certification verify.
Previously i installed rom manager app and flash the cwm from the app. After reboot to recovery, only stock recovery that showed, then i reboot to system, install freegee in order to flash the cwm but fail as freegee doesnt support gpro kitkat.
After that i install gpro kitkat recovery and flash the cwm from the app, success, reboot to recovery but stuck on the error.
I uninstalled rom manager and freegee, but still no luck to get the flashed cwm recovery,stuck in secure booting error.
Any suggestion or thread reference? Why is very difficult to install custom rom on this device?i plan to install carbon rom :crying:
Thank you in advance.
Click to expand...
Click to collapse
Start from 4.1.2 stock, root, use freegee to bypass lockdown, flash latest TWRP then flash Lollipop ROMs... There is info about everything on the forums.
ShadySquirrel said:
Start from 4.1.2 stock, root, use freegee to bypass lockdown, flash latest TWRP then flash Lollipop ROMs... There is info about everything on the forums.
Click to expand...
Click to collapse
Thank you very much Shady.. Please be kindly to review steps that i should execute when flashing to Carbon Lollipop with regards to my current state (rooted 4.4.2. stock Kitkat):
Prerequisite:
- LG Flash Tool 2014 installed in PC
- LG United Mobile Driver (i use v3.11.3) installed in PC
- Stock firmware E98810e_00.kdz (Indonesia Jellybean) -- Jellybean stock base is required to cater modem/wakelock issue
- Stock firmware E98820c_00.kdz (Indonesia Kitkat)
- ROM Manager (for current state backup/restore)
- Freegee (to cater LG security issue after success flash)
- Towelroot (to root device after success flash)
- TWRP (for recovery tool after success flash)
- Downloaded ZeKrnl 1.7 Build 11/28 - https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975
- Downloaded ZeKrnl 1.6 - https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page4 (to cater camera issue after flashed to Carbon)
1. Flash CWM via ROM Manager
2 Execute Backup Current ROM to sd card via ROM Manager and save copy to PC
3. Backup manual for files, apks, contacts to sd card and save copy to PC
4. Copy ZeKrnl 1.7 zip & ZeKrnl 1.6 zip to sd card
5. Turn off phone, plug usb cable to phone
6. Press & hold Volume keys (Up + Down) then plug the other end of usb into PC to until download mode showned
7. Run LG Flash Tool with administrator privilege
8. Flash E98810e firmware into the device till success
(After Success Flash to Andro 4.1.2 JB):
9. Install towelroot and root the device
10. Install freegee to cater LG security issue
11. Install latest TWRP
12. Reboot into recovery mode
13. wipe system, data, cache, dalvik cache
14. flash ZeKrnl 1.7
--Camera issue
debug.composition. type=dyn --> debug.composition. type=gpu using build prop editor and/or flash ZeKrnl 1.6 kernell
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page8
--Deep Sleep issue
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page10
-- SD Card issue
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page12
-- Kernel parameter tuning sampel
https://forum.xda-developers.com/optimus-g-pro/development/rom-e980-ze-krnl-1-6-t3255975/page14
Btw looks like you are the only person that still active in this thread...really appreciate it...thank you very much
You're complicating it too much, to be honest
Just do it this way:
1. flash stock 4.1.2 and keep it that way
2. root, install Freegee, install initial recovery (twrp, cwm, doesn't mater), update it to TWRP from forums (2.8 version is preferred)
3. you're ready to flash create stock backup and flash roms.
If I remember, all those changes are already implemented in both SlimLP and Carbon. Slim has newer kernel and gpu drivers, and that's it.
So you are saying i just flash the rom as is without any further change?Noted shady...i will inform you the result
ShadySquirrel said:
You're complicating it too much, to be honest
Just do it this way:
1. flash stock 4.1.2 and keep it that way
2. root, install Freegee, install initial recovery (twrp, cwm, doesn't mater), update it to TWRP from forums (2.8 version is preferred)
3. you're ready to flash create stock backup and flash roms.
If I remember, all those changes are already implemented in both SlimLP and Carbon. Slim has newer kernel and gpu drivers, and that's it.
Click to expand...
Click to collapse
Ive tried your suggestion with the following result:
a. Flash to stock 4.1.2 (v10e) : success but then the master file i downloaded is gone
b. Root, install freegee, initial recovery: success
c. Update to twrp 2.8 using twrp manager: success
d. Flash to Carbon: fail, canot enter recovery mode with message secure booting error,boot certification verify
So i just rollback to kitkat stock
hotmatua.parulian said:
Ive tried your suggestion with the following result:
a. Flash to stock 4.1.2 (v10e) : success but then the master file i downloaded is gone
b. Root, install freegee, initial recovery: success
c. Update to twrp 2.8 using twrp manager: success
d. Flash to Carbon: fail, canot enter recovery mode with message secure booting error,boot certification verify
So i just rollback to kitkat stock
Click to expand...
Click to collapse
So, you can't boot TWRP at all? It seems that TWRP you installed isn't lokified. Are you sure you've installed TWRP 2.8? I remember flashing it directly via flashify on my device and it worked.. Also, check TWRP thread for lokified zip, I think someone posted that.
Edit: you see now why almost everyone abandoned this device
ShadySquirrel said:
So, you can't boot TWRP at all? It seems that TWRP you installed isn't lokified. Are you sure you've installed TWRP 2.8? I remember flashing it directly via flashify on my device and it worked.. Also, check TWRP thread for lokified zip, I think someone posted that.
Edit: you see now why almost everyone abandoned this device
Click to expand...
Click to collapse
Yes, i cant boot twrp, i used twrp manager apk,i think its not lokified.
hotmatua.parulian said:
Yes, i cant boot twrp, i used twrp manager apk,i think its not lokified.
Click to expand...
Click to collapse
After installing freegee's twrp, reboot to recovery. Then, it might be OK.
After that, reboot system and use flashify, the free version will do.
You can either choose to download the file or chose from your internal / external memory.
I'm using the latest version TWRP 3.0.2.0.
If it doesn't work at first, go back to start and try again...
g0at1 said:
After installing freegee's twrp, reboot to recovery. Then, it might be OK.
After that, reboot system and use flashify, the free version will do.
You can either choose to download the file or chose from your internal / external memory.
I'm using the latest version TWRP 3.0.2.0.
If it doesn't work at first, go back to start and try again...
Click to expand...
Click to collapse
Thanks for respond, i have to download the jb stockbase again as the file used for lg flash tool is missing, looks like flashtool keep it somewhere...btw, when i use flashtool to flash the jb stock (offline mode), it.doesnt complete 100%, at 99% device was successfully boot and normal but state in flashtool screen is 99% and message to.retry is showned up.
Fyi, after flashed to jb, i cant execute fastboot flash command, the result is waiting for any device, but adb devices command return expected result. Enable debugging setting is already checked also.
Quiet interesting this device...salut to programmers of this device...
hotmatua.parulian said:
Thanks for respond, i have to download the jb stockbase again as the file used for lg flash tool is missing, looks like flashtool keep it somewhere...btw, when i use flashtool to flash the jb stock (offline mode), it.doesnt complete 100%, at 99% device was successfully boot and normal but state in flashtool screen is 99% and message to.retry is showned up.
Fyi, after flashed to jb, i cant execute fastboot flash command, the result is waiting for any device, but adb devices command return expected result. Enable debugging setting is already checked also.
Click to expand...
Click to collapse
G Pro doesn't support fastboot commands (or is really limited in that field, I'm not sure what to say/think), due to some mess LG made. Mine didn't even want to 'adb reboot bootloader', it simply rebooted device back to system, and was pain in the ass for many things because It has custom download mode, it has custom boot sequence, everything is locked down... everything is different from everything else you're used to. Thank God back then a+b OTA system didn't exist, we'd never get any AOSP support not...
Do as g0at1 said - flash TWRP from Freegee, boot it to make sure it works, reboot back to system and flash newer TWRP from Flashify or any other tool like that one. I did have E988 (just Taiwan variant), and never had that much issues, nearly every time it was a straightforward 'flash JB KDZ, root it manually, Freegee, newer TWRP, backup, flash ROM', and trust me, that one was "revived" many times.
In the end, if even that doesn't help, flash CWM from Freegee, and update it with Philz Touch for E980. I think it will support Lollipop ROMs without any issues, just don't ever boot directly into it if you're not ready to mess with dd from recovery mode - always use adb.
hotmatua.parulian said:
Quiet interesting this device...salut to programmers of this device...
Click to expand...
Click to collapse
This device was one of the hardest devices to work with... and I had Note N7000 with bad MMC which nearly bricked five times running unrooted stock firmwares Samsung provided. And Tegra-based Galaxy S2 clone with many hardware and software issues on stock... And many nameless devices with chips made by "big" vendors, like Allwinner, Rockchip etc which got some older CyanogenMod version builds with some or even complete success... And I never, never had that much issues porting stuff to any of these above, as I had with G Pro. Heck, working on a overclocking and underclocking for G Pro took me nearly two months of coding, testing, scratching everything off and starting from the beginning to just get it to some functional level and make it work as intended... and when I look at that code, I still have a feeling that it isn't completed and that some fixes are still necessary. I won't even start with GPU issues, I've spent more time than I'd like to admit on patching sessions.
ShadySquirrel said:
G Pro doesn't support fastboot commands (or is really limited in that field, I'm not sure what to say/think), due to some mess LG made. Mine didn't even want to 'adb reboot bootloader', it simply rebooted device back to system, and was pain in the ass for many things because It has custom download mode, it has custom boot sequence, everything is locked down... everything is different from everything else you're used to. Thank God back then a+b OTA system didn't exist, we'd never get any AOSP support not...
Do as g0at1 said - flash TWRP from Freegee, boot it to make sure it works, reboot back to system and flash newer TWRP from Flashify or any other tool like that one. I did have E988 (just Taiwan variant), and never had that much issues, nearly every time it was a straightforward 'flash JB KDZ, root it manually, Freegee, newer TWRP, backup, flash ROM', and trust me, that one was "revived" many times.
In the end, if even that doesn't help, flash CWM from Freegee, and update it with Philz Touch for E980. I think it will support Lollipop ROMs without any issues, just don't ever boot directly into it if you're not ready to mess with dd from recovery mode - always use adb.
This device was one of the hardest devices to work with... and I had Note N7000 with bad MMC which nearly bricked five times running unrooted stock firmwares Samsung provided. And Tegra-based Galaxy S2 clone with many hardware and software issues on stock... And many nameless devices with chips made by "big" vendors, like Allwinner, Rockchip etc which got some older CyanogenMod version builds with some or even complete success... And I never, never had that much issues porting stuff to any of these above, as I had with G Pro. Heck, working on a overclocking and underclocking for G Pro took me nearly two months of coding, testing, scratching everything off and starting from the beginning to just get it to some functional level and make it work as intended... and when I look at that code, I still have a feeling that it isn't completed and that some fixes are still necessary. I won't even start with GPU issues, I've spent more time than I'd like to admit on patching sessions.
Click to expand...
Click to collapse
:good::good::good::good: salut to you...the true programmer..never quit..yes im agree with you...i had played with nexus 1,2,3 before but never found something like this...
OK then, i will try g0at1 suggestion, hopefully it works... Like you said its only JB, root, freegee, newer twrp, backup, flash custom
Update
I couldnt wait to try again,i cant download the jb stock for a while due to internet quota limitation, so i did this:
1. Flash to stock that i still have v20c 4.4.2
2. Reboot to stock recovery then reboot to system
3. Run roottool.kitkat batch script (found from http://www.gadgetstroop.com), reboot to recovery, sideload installation of root script with result success
4. Reboot to system, run Root Checker to ensure device has been rooted
5. Install cwm recovery with GPro Kitkat Recovery 6.0.4.4 with result success
6. Reboot to cwm recovery success and do nandroid backup
7. Reboot to system, install flashify, download latest twrp official 3.0.2 and flash it using flashify: success
8. Reboot to recovery, now the recovery become twrp
9. Install package Carbon 5.1 unofficial: fail with message "cant install this package on top of incompatible data"
hotmatua.parulian said:
Update
I couldnt wait to try again,i cant download the jb stock for a while due to internet quota limitation, so i did this:
1. Flash to stock that i still have v20c 4.4.2
2. Reboot to stock recovery then reboot to system
3. Run roottool.kitkat batch script (found from http://www.gadgetstroop.com), reboot to recovery, sideload installation of root script with result success
4. Reboot to system, run Root Checker to ensure device has been rooted
5. Install cwm recovery with GPro Kitkat Recovery 6.0.4.4 with result success
6. Reboot to cwm recovery success and do nandroid backup
7. Reboot to system, install flashify, download latest twrp official 3.0.2 and flash it using flashify: success
8. Reboot to recovery, now the recovery become twrp
9. Install package Carbon 5.1 unofficial: fail with message "cant install this package on top of incompatible data"
Click to expand...
Click to collapse
You forgot to wipe system, data and caches.
ShadySquirrel said:
You forgot to wipe system, data and caches.
Click to expand...
Click to collapse
Hehehe,..thats what i thought at 1st place when it comes to fail..so i reboot to system again, reboot to recovery and try again but the result is still the same....cant install on top of icompatible data..
P.S: now downloading your slim lp 5.1 beta unofficial and i want to try it 2morrow...
hotmatua.parulian said:
Hehehe,..thats what i thought at 1st place when it comes to fail..so i reboot to system again, reboot to recovery and try again but the result is still the same....cant install on top of icompatible data..
P.S: now downloading your slim lp 5.1 beta unofficial and i want to try it 2morrow...
Click to expand...
Click to collapse
I use SlimLP for a long time because it's the only one that works smoothly for me. You might not have any trouble flashing it Through the latest TWRP.
Have fun!
g0at1 said:
I use SlimLP for a long time because it's the only one that works smoothly for me. You might not have any trouble flashing it Through the latest TWRP.
Have fun!
Click to expand...
Click to collapse
Finally carbon installed successfully after I repeat the step very carefully including your reminder bout wiping...
Thank you very much, I will consult any bugs I found..
Half Day 1 issue:
- Scrambled screen layout each time booting
- Camera unstable/crash, also with apps camera mx and open camera
- i think batt is draining faster than kitkat stock
- i feel internet via wifi is slower than kitkat stock
- phone call, other person cant hear my voice
Just flashed SlimLP..Gosh its so slim and smooth...thank you very much...there issue bout the camera and scrambled screen each time I reboot the system, which camera apps I should use?
Hi!
SuperSu requested an update of the binaries and I followed as instructed.
After the reboot phone did get into bootloop. Google showed me this thread:
https://forum.xda-developers.com/ap...78-release-t3452703/post72428986#post72428986
So I followed the instructions their and installed SR3-SuperSU-v2.79-SR3-20170114223742.zip
The bootloop didn't stopped now I'm kinda lost what todo.
Can you point me what to do to get the phone back to running? Thanks!!
From supersu.com/download, I installed "Recovery V2.79 Flashable.zip" which seemed to fix the problem. (I'm a new user and I can't post links)
C0qRouge said:
Hi!
SuperSu requested an update of the binaries and I followed as instructed.
After the reboot phone did get into bootloop. Google showed me this thread:
https://forum.xda-developers.com/ap...78-release-t3452703/post72428986#post72428986
So I followed the instructions their and installed SR3-SuperSU-v2.79-SR3-20170114223742.zip
The bootloop didn't stopped now I'm kinda lost what todo.
Can you point me what to do to get the phone back to running? Thanks!!
Click to expand...
Click to collapse
I've flashed that Supersu several times without issue.. Must be some other problem. What rom were you on, and what other mods, etc.?
rqpg said:
From supersu.com/download, I installed "Recovery V2.79 Flashable.zip" which seemed to fix the problem. (I'm a new user and I can't post links)
Click to expand...
Click to collapse
Hi!
I was running into the same trouble boot looping after upgrading to 2.82. I am on DStrikersZ1 SP007
Solved by entering recovery an flash "Recovery V2.79 Flashable.zip", but SU-GUI under settings - ROM Control is gone.
Root access is still possible (Titanium Backup still running smooth). Maybe try an older one and disable automatic update of superSU.
Maybe different on other ROMs.
Greets!
I fixed it by installing the Test1 zip of 28.04.2017 provided by Chainfire and also wiped Cache / Dalvik. Didn't checked if the gui is there, but Chainfire already said that this could happend and that you should uninstal it via adb and install the gui again.
I'm on stock btw. @levone1 I provided a link to the problem but you didn't care to check the link and instead wrote some .....
C0qRouge said:
I fixed it by installing the Test1 zip of 28.04.2017 provided by Chainfire and also wiped Cache / Dalvik. Didn't checked if the gui is there, but Chainfire already said that this could happend and that you should uninstal it via adb and install the gui again.
I'm on stock btw. @levone1 I provided a link to the problem but you didn't care to check the link and instead wrote some .....
Click to expand...
Click to collapse
Sorry, I just wanted to start from scratch... Glad it worked out.
hi
follow these steps
1 kernel flash .108
2 enters the recovery
3 installs supersu zip 4.79
4 installs rom [D5503] [Stock] [PRF + FTF] [Lollipop] 14.6.A.1.236
5 restart
I had the same problem and solved it
Update!
after downgrading to 2.79 i flashed new version from chainfire.
see https://www.xda-developers.com/supersu-v2-82-released-on-the-google-play-store/
No bootloop. But the gui was gone. Solved by installing supersu via Playstore.
Just got this sorted out...
Updated the binaries today and bootloop...
Recovery flash v2.79 helped.
Flashed from recovery. Reboot. The usual optimisation of apps.
Phone started normally after that.
No SuperSU after boot. Had to install from PlayStore, but didn't update the binaries though.
Root is working fine after that.
On Stock ROM .236
Installing the Test.zip file in TWRP solved my bootloop.
Thanks C0q
Going back back to v2.78..
I recently flashed v30b on my D855. I did a clean (CSE) flash with the LG flash tool 2014 and rooted the device with KingRoot. But every time I reboot I lose root acces.
I installed the bump'd version of TWRP with flashify, but when I try to boot into TWRP I get a MISMATCH_SIG_LEN error before the screen goes black and the led starts blinking. I then pull out the battery to start over with a fresh unrooted phone. I think I loose root acces before entering recovery or something. I did some searching, but the only solution I found was to do a clean install, which I already did.
My goal is to install TWRP to flash custom ROMs. How do I fix this?
I think that after installing root with kingroot you will need to perm root it. Kingroot is only temporaty and even if you uninstall it you get unrooted.
Nikolatas said:
I think that after installing root with kingroot you will need to perm root it. Kingroot is only temporaty and even if you uninstall it you get unrooted.
Click to expand...
Click to collapse
I'm having a sort of similar problem on my D85130d. I downgraded fine from 30g to 30d with LGUP. downloaded kingroot and rooted. That was all good. Installed TWRP and flashed the recovery rom and was able to make a backup of my current stock rom (which has saved my life because I think I've soft bricked my phone about 4 times trying to permanent root hahah). Since I AM new to rooting I think I'm missing a certain step, (or maybe the zips im trying to flash are corrupt?) Basically, tried https://forum.xda-developers.com/tm...wngrading-rooting-t3608851/page3#post74961164 and I've also tried https://forum.xda-developers.com/tm...ock-d851-30d-kdz-flashable-zips-imgs-t3367371. The problem with the first one is its not completely specific and like I mentioned before, I'm a white belt at rooting lol. The second thread gave me hope and i do have TWRP installed so I downloaded the 2 main zips I would need (a. LG-D85130D-Flashable.Boot-AUTOREPACK.zip
and b. SuperSU zip) reboot to recovery and flashed both zips separately then reboot. But I end up with a TMO screen and it stays like that. This last time I even left it loading on that screen for about 2 hours and no such luck. I'm wondering is there something I'm missing? Any help would be greatly appreciated from the XDA gods
HingleMcCringleberry said:
I'm having a sort of similar problem on my D85130d. I downgraded fine from 30g to 30d with LGUP. downloaded kingroot and rooted. That was all good. Installed TWRP and flashed the recovery rom and was able to make a backup of my current stock rom (which has saved my life because I think I've soft bricked my phone about 4 times trying to permanent root hahah). Since I AM new to rooting I think I'm missing a certain step, (or maybe the zips im trying to flash are corrupt?) Basically, tried https://forum.xda-developers.com/tm...wngrading-rooting-t3608851/page3#post74961164 and I've also tried https://forum.xda-developers.com/tm...ock-d851-30d-kdz-flashable-zips-imgs-t3367371. The problem with the first one is its not completely specific and like I mentioned before, I'm a white belt at rooting lol. The second thread gave me hope and i do have TWRP installed so I downloaded the 2 main zips I would need (a. LG-D85130D-Flashable.Boot-AUTOREPACK.zip
and b. SuperSU zip) reboot to recovery and flashed both zips separately then reboot. But I end up with a TMO screen and it stays like that. This last time I even left it loading on that screen for about 2 hours and no such luck. I'm wondering is there something I'm missing? Any help would be greatly appreciated from the XDA gods
Click to expand...
Click to collapse
To be fair, i perma rooted the v30B variant. Im not sure bout the D. I rooted it with kingroot, installed TWRP via autorec, i went in recovery and flashed the file thats in the post, rebooted and then installed supersu from the playstore and im perma rooted. After that kingroot is gone and you are left with supersu. This is the guide i followed https://forum.xda-developers.com/lg-g3/general/root-twrp-marshmallow-d855-30b-t3286268
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
Format data with the FORMAT DATA button first in TWRP then immediately flash Magisk (preferred) or latest Supersu.
Reboot.
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
Just wondering how you flashed TWRP (which version) and how? I'm having the same issue trying to get root on this phone and will probably just flash a custom
jermzii said:
Just wondering how you flashed TWRP (which version) and how? I'm having the same issue trying to get root on this phone and will probably just flash a custom
Click to expand...
Click to collapse
I have done it! Had the same problem and yes i have the Canadian a520w. I had to use Odin and then install superuser
Step one: Is to download Odin on pc mac or linux.
Step two: download superuser on your phone then move the file from your phone to
you computer.
Step three: open Odin and select the superuser zip file and it should say pass.
Step four: install root checker off Google play
This is not a full tutorial on how to install it but all you need to search is how to use Odin.
I got it!!
jermzii said:
I got it!!
Click to expand...
Click to collapse
Glad you got it to work did you use my method?
ashyx said:
Format data with the FORMAT DATA button first in TWRP then immediately flash Magisk (preferred) or latest Supersu.
Reboot.
Click to expand...
Click to collapse
Can you please provide a link to an appropriate TWRP version for SM-A520W?
Many thanks!
---------- Post added at 09:47 PM ---------- Previous post was at 09:45 PM ----------
SlickSneeker said:
I have done it! Had the same problem and yes i have the Canadian a520w. I had to use Odin and then install superuser
Step one: Is to download Odin on pc mac or linux.
Step two: download superuser on your phone then move the file from your phone to
you computer.
Step three: open Odin and select the superuser zip file and it should say pass.
Step four: install root checker off Google play
This is not a full tutorial on how to install it but all you need to search is how to use Odin.
Click to expand...
Click to collapse
Please excuse my being a layman in this matter. I tried tot flash superuser.zip using ODIN but ODIN does not even see zip files (it only recognizes some other formats like .tar, .img etc). Could you please give a little more details on how you flashed superuser.zip using ODIN?
Thanks a lot in advance.
jermzii said:
I got it!!
Click to expand...
Click to collapse
Hi jermzii,
I apologize for my questions - I am not very experienced in all these. I would like to ask you a few questions:
Where did you get an appropriate TWRP version for SM-A520W?
Also, ODIN, does not "see" zip files. How did you flash the supersu.zip using ODIN?
Many thanks for your help in advance.
I just bought a Canadian A520W with with stock Nougat (Telus firmware A520WVLS2BRD2). I tried to root it using CF autoroot and TWRP and I had the exact experience as the OP dan.tjones. There is no TWRP specifically for A520W. After trying several versions I found one which is successfully flashed with ODIN (TWRP 3.2.1.0 for A520F). TWRP appears to install Magisk (latest version 16) successfully but it shows no root or su binary. TWRP also appears to install SuperSU zip (there is a specific version for A520W nougat) successfully, but when I open SuperSU app, it says the SU binary is occupied. Google shows two "fixes" ((1) clean uninstall using an option within SuperSU, then reinstall, and (2) uninstall SuperSU + install an earlier version of SuperSU then updating the binary (hangs). Both fixes do not work. Someone mention wiping DATA in TWRP would fix the problem, but it did not work for me.
The major problem seems to be KNOX keep saying "failed verification". At one point it was so screwed up that it just boot-loop / hang and the only thing that work was download mode. I install TWRP again and it sticks. Then I wiped everything (cache/ Dalvik, data, system, internal storage). I probably could try to flash the stock nougat firmware using ODIN, but it was still downloading (snail speed free download).
Since there is no more OS in the phone, I manage to install a 6.0.1 pre-rooted custom ROM using TWRP (I originally intended to downgrade from 7 to 6.0.1 anyway because of reports of poor battery life), and installation was successfully, giving me root. BTW I originally tried to downgrade from stock nougat to stock marshmellow using ODIN, but it does not work ("failed" message).
The TWRP version that I flashed with ODIN:
TWRP 3.2.1.0 for A520F ("recovery_a5y17lte-080318.img.tar")
https://androidfilehost.com/?fid=890129502657588962
The 6.0.1 custom ROM I installed with TWRP:
AXES ROM v.1 (they did say it is compatible with A520W)
https://forum.xda-developers.com/samsung-a-series-2017/development/rom-t3606231
I did not find any nougat custom ROM suitable for A520W. I am happy that I can find a rooted ROM and it does not matter to me whether it is marshmellow or nougat.
slim_thumb said:
I just bought a Canadian A520W with with stock Nougat (Telus firmware A520WVLS2BRD2). I tried to root it using CF autoroot and TWRP and I had the exact experience as the OP dan.tjones. There is no TWRP specifically for A520W. After trying several versions I found one which is successfully flashed with ODIN (TWRP 3.2.1.0 for A520F). TWRP appears to install Magisk (latest version 16) successfully but it shows no root or su binary. TWRP also appears to install SuperSU zip (there is a specific version for A520W nougat) successfully, but when I open SuperSU app, it says the SU binary is occupied. Google shows two "fixes" ((1) clean uninstall using an option within SuperSU, then reinstall, and (2) uninstall SuperSU + install an earlier version of SuperSU then updating the binary (hangs). Both fixes do not work. Someone mention wiping DATA in TWRP would fix the problem, but it did not work for me.
The major problem seems to be KNOX keep saying "failed verification". At one point it was so screwed up that it just boot-loop / hang and the only thing that work was download mode. I install TWRP again and it sticks. Then I wiped everything (cache/ Dalvik, data, system, internal storage). I probably could try to flash the stock nougat firmware using ODIN, but it was still downloading (snail speed free download).
Since there is no more OS in the phone, I manage to install a 6.0.1 pre-rooted custom ROM using TWRP (I originally intended to downgrade from 7 to 6.0.1 anyway because of reports of poor battery life), and installation was successfully, giving me root. BTW I originally tried to downgrade from stock nougat to stock marshmellow using ODIN, but it does not work ("failed" message).
The TWRP version that I flashed with ODIN:
TWRP 3.2.1.0 for A520F ("recovery_a5y17lte-080318.img.tar")
https://androidfilehost.com/?fid=890129502657588962
Before flashing custom ROM (in zip format), I use TWRP to wipe everything on the phone (cache / Dalvik, data, system, internal storage).
The 6.0.1 custom ROM I installed with TWRP:
AXES ROM v.1 (they did say it is compatible with A520W)
https://forum.xda-developers.com/samsung-a-series-2017/development/rom-t3606231
I did not find any nougat custom ROM suitable for A520W. I am happy that I can find a rooted ROM and it does not matter to me whether it is marshmellow or nougat.
Click to expand...
Click to collapse
You have rooted the device successfully the first time when you flashed magisk.Just root manager app was not installed.
If you have screwed up your device, do a clean flash of OS...then flash twrp and after flashing magisk the binary would be flashed but the app would
not be installed.To do that extract the app from the magisk zip that you flashed.It must be in common folder inside the zip.
Dont flash binaries on top of binaries.
Hope it helps
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
hey...im novice at this as well but I did get my a520w rooted with su on oreo with twrp...I flashed the latest su on twrp....twrp was hard to get on but there is somewhere that shows how...good luck
A Very Possible and Precise Solution
dan.tjones said:
Hey everyone,
I have been trying to root my new Samsung A5 (A520W - Canadian variant) but nothing seems to be working.
My first method was to flash CF AUTO ROOT with Odin, but this just rebooted the device without any sign of changing anything - no superSU installed and RootChecker returning negative results
I then flashed TWRP, and from there tried installing both SuperSU and Magisk v16.0, both of these options made the phone unusable (verification error on boot) so I flashed back to stock firmware and now I'm out of ideas.
I've tried looking for guides on the SM-A520F (non-Canadian variant) but most of these are out of date with respect to the recent OTA upgrade to nougat and/or mention the CF AUTO ROOT method which I know doesn't work
has anyone here managed to root this device? Am I missing a step, like formatting/wiping data beforehand or something? is it worth downgrading to an earlier android version?
Cheers!
Click to expand...
Click to collapse
Hey Sir!
Soooooo I've been messing around with this all night and I figured it out somehow after nearly frying my new A5 (2017) lol
I'd recommend that you follow the directions as best you can and as fully to help you not have to redo all your software settings and stuff like I did haha. I think if all this is done in this order you shouldn't have to lose your data. I can't guarantee anything but figured I could share what worked for me. BONUS: I actually don't have an unlocked phone and I'm still locked to my carrier actually! So I don't think all these warnings are necessarily valid. Anyhow, hope it helps. :laugh:
NOTE: I'm not allowed to post website links here for some reason haha so sorry for the inconvenience! All the sites began with the https colon double slash btw! So MAKE SURE to add that to the addresses below (links are in italics)!
FIRST: Completely backup phone using Android Studio as can be found at Tech Republic website /article/how-to-create-a-full-backup-of-your-android-device-without-root/ . Also I'd recommend you do a Smart Switch full backup. Smart Switch will work to some extent and I personally restored from there pretty intact as I didn't have the Android Studio backup option before my phone got wrecked by the Verification error after I attempted to flash SuperSU onto the phone using TWRP.
1. BEFORE ANYTHING ELSE: Enable Developer Mode (by tapping on the Build Number several times), Turn OEM unlock on, enable USB debugging, and make sure all the "factory reset block" is off (or Allow factory reset option is on) and encrypted data features are off, I unlocked any Notes and disabled Secure Folder and Knox and Samsung Pass
2. Turn phone off
3. Boot phone into Custom OS install mode by holding Power+Volume Up+Home
4. I downloaded a TWRP installer file from tx5.androidfilehost.com/dl/TLLV1I5jSqS9Zg68RNh1hA/1538776061/890129502657588962/recovery_a5y17lte-080318.img.tar
5. Download the Odin software to flash TWRP onto your device, I got mine from drive.google.com/file/d/0B-2yp-J_x0LPaGJrSUlUcHE1a2s/view
6. Used Odin 3.1 to flash TWRP onto Recovery using the AP function, also turned Auto Reboot and F.Restart off (unchecked boxes)
7. Downloaded (newest file that's a zip) such as no-verity-opt-encrypt-6.0.zip from build.nethunter.com/android-tools/no-verity-opt-encrypt/ and put it on the SD card in the phone
8. Turned phone off and booted it into Recovery Mode by holding Power+Volume Down+Home
9. Used TWRP recovery to flash the no-verity-opt-encrypt-6.0.zip which sort of disables all the security things on Samsung (such as Health and Pass and Auto Updates) that would block your work, and this actually lets you reboot your phone instead of getting the Verification Integrity Check failed error and having to reset your phone every time.
10. After rebooting my phone, everything was running fine. I then downloaded SuperSU file SR5-SuperSU-v2.82-SR5-20171001224502.zip from download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip?retrieve_file=1
11. Used TWRP in Recovery Mode to flash SuperSU onto phone from SD card and hit Reboot. Slight boot loop was visible and then the phone restarted normally with SuperSU installed and full root access. Thanks be to God.
Again, I can't guarantee this will work BUT it is the first walkthrough that I know of on the web. Hope it helps at all!
Edit:
Originally gave up on this, but recently managed to flash TWRP.
Now in Verification Error on boot, and trying to flash the no-verity to get around that.
Success (almost rooted, but shouldn't be much harder)
Just flashed a custom OS using Odin_3.12.3, twrp-3.2.3-1-a5y17lte.img.tar, lineage-14.1-20181117-nightly-a5y17lte-signed.zip, and open_gapps-arm64-7.1-pico-20181204.zip.
With help from this discussion, the LineageOS wiki "Install LineageOS on a5y17lte", r/LineageOS "Heimdall Failed to send data" (a post by noahajac was very helpful. You'll find it soon after OP), and the Odin install guide.
Some problems I encountered was that heimdall isn't favoured for this, and that if you try to wipe your partition through TWRP and it says it couldn't mount /data, you need to format the partition before wiping it.
Edit: so upon using the phone for a bit, it became evident that the SIM card was not being detected. From what I've read so far, this is because the phone had Android Oreo and the LineageOS was for Nougat. So I will have to restore and then revert to a Nougat version of Android and try again from there...
Not gonna be finished tonight. As long as I can get the restore and cell service working...
Two Questions re: rooting the SM-A520W
1. How can I make a proper Nandroid Backup. Everytime I go into TWRP the /data partition is unavailable. Yes I formated it and flashed no-verity-opt-encrypt-6.0.zip but it still is Zero bytes.
2. After rooting, the Fingerprint scanner becomes non operational and the lock screen password/pin does not work (keeps asking for the same password/pin over and over even though they are correct.)
Thanks for the Help.
ethan_hines said:
1. How can I make a proper Nandroid Backup. Everytime I go into TWRP the /data partition is unavailable. Yes I formated it and flashed no-verity-opt-encrypt-6.0.zip but it still is Zero bytes.
2. After rooting, the Fingerprint scanner becomes non operational and the lock screen password/pin does not work (keeps asking for the same password/pin over and over even though they are correct.)
Thanks for the Help.
Click to expand...
Click to collapse
Which firmware are you running.
ashyx said:
Which firmware are you running.
Click to expand...
Click to collapse
I'm on Stock 8.0
I managed to fix problem 1 by flashing a modded Version of TWRP (3.2.3-TwrpBuilder) I am rooted with Magisk and now have access to the /data partition and can make a proper Nandroid Backup.
Problem 2 Is still there I seem to remember I have to replace Samsung Pass and Samsung Account, but I don't know where they are located I think I am supposed to create a directory in /prv-app I don't remember
I have that phone. I installed a custom recovery and used super SU.
SonicFan66 said:
I have that phone. I installed a custom recovery and used super SU.
Click to expand...
Click to collapse
I didn't want Super SU because it can't be hidden from apps that disable if root is detected esp. Snapchat
@ethan_hines did you figure it out? I am looking to do what you did.