Shift Lollipop Kernel
This kernel supports only Lollipop AOSP. Should support all roms but not sure about Slim, if it doesn't work for a ROM please upload the boot.img from the ROM and post it here and I will see about adding support. Basically this kernel was developed only for CyanideL ROM but has progressed into a decent standalone kernel from reports as I do not own this device, so I thought I would just go ahead and share it so it was known and people could use it for other Lollipop Roms since I keep the source updated for the ROM I figured a kernel with some features and up to date source would be worth posting. Hopefully you all enjoy it
CPU GOVERNORS: smartass, smartassV2, ondemand, powersave, interactiveX, performance, userspace, zzmoove, wheatley and nightmare
I/O GOVERNORS: noop, deadline, cfq, row, sio
default cpu governor: InteractiveX
default I/O governor: row
F2FS/EXT4
OverClock to 1881
CPU Voltage Control
GPU Step Control
Advanced TCP Controls
Faux Sound Mod
Quick Charge
Compiled with Linaro GCC 4.9.1
Install Instructions: Standard flash in recovery, wiping caches in recommended but usual shouldn't be required
Current version is 3.0
Downloads: Shift Kernel
Thank you and enjoy!!
If you like our work, then maybe you would like to give a small donation or buy me a beer. You know you want to lol :victory:
Donate to @rogersb11
Thank you and ENJOY!!!!!
XDA:DevDB Information
Shift Kernel, Kernel for the AT&T Samsung Galaxy S III
Contributors
rogersb11
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2015-02-19
Created 2015-02-20
Last Updated 2015-02-19
Nice work here man ?
GS3-T999L : SOKP-MS-04-KK444
Hey rogersb11. I just installed on my sgh-i747m. Running an alpha self built pacman ROM. I will test it out today and report back results. Thanks for all your contributions in the Dev world. Cheers!!!!
Sent from my SAMSUNG-SGH-I747 using Xparent Cyan Tapatalk 2
exfat?
Thanks! This kernel has been working great on Cyanide L.
Quick question, does it have exfat support built in?
This kernel is working great on Oct-L
jason2678 said:
Thanks! This kernel has been working great on Cyanide L.
Quick question, does it have exfat support built in?
Click to expand...
Click to collapse
Top of my head I'm not sure and I'm not by my build machine to check the source. If it's not I can look into adding it tho. I have it in my they kernel source so I'm sure I can port it over
Thanks. I have a microsd that may be of dubious quality. It works best as exfat. I've found I have to be really cautious with it. I'm pretty sure I didn't try it with cyanide.
Doesn't seem to support exfat, but it's nice and smooth on the official Slim weekly.
Loving your kernel, hey I am wondering about f2fs, is it new? I tried formating my system and data to f2fs flashed shift v2.2 and didn't boot I tried this on cyanide L and I am a currently on it (ext4), if there are different steps I need to take please let me know other wise I am loving v3!!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Johnnyy9262 said:
Loving your kernel, hey I am wondering about f2fs, is it new? I tried formating my system and data to f2fs flashed shift v2.2 and didn't boot I tried this on cyanide L and I am a currently on it (ext4), if there are different steps I need to take please let me know other wise I am loving v3!!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
You need the kernel changer from the f2fs thread to allow ROM to boot
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Would this work for d2tmo?
gvsukids said:
You need the kernel changer from the f2fs thread to allow ROM to boot
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Link me? It would be amazing if actually get f2fs working in lollipop [emoji1]
Sent from my SAMSUNG-SGH-I747 using Tapatalk
roogerrisboredd said:
Would this work for d2tmo?
Click to expand...
Click to collapse
Yes it SHOULD. Comes with cyanide ROM and it's for tmobile as well
gvsukids said:
You need the kernel changer from the f2fs thread to allow ROM to boot
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
F2fs ramdisk support was added in 3.0. I only added it for data and cache tho and that's where the improvements are to be had
Shift 3.0 bootloops on CyanideL
I've been running CyanideL with the Shift kernel for a couple of months with no problems. The latest version (20150220) bootloops on me, though. I tried a dirty flash, then factory reset but either way it shows the Samsung flash screen, buzzes and then back. I tried flashing Shift 3.0 separately after this happened, as suggested by @TheGeekyNimrod, but that produced the same result. But then I flashed Shift 2.2 D2 over CyanideL-20150220, and now it's booting fine.
I tried to take a logcat while it was booting with adb logcat>logfile but I got the message -waiting for device- and nothing more. The logifle was empty. Is there another way to take a boottime logcat? My recovery is TWRP 2.8.4.0.
Thanks, @rogersb11, for all your work on this.
pixbuf said:
I've been running CyanideL with the Shift kernel for a couple of months with no problems. The latest version (20150220) bootloops on me, though. I tried a dirty flash, then factory reset but either way it shows the Samsung flash screen, buzzes and then back. I tried flashing Shift 3.0 separately after this happened, as suggested by @TheGeekyNimrod, but that produced the same result. But then I flashed Shift 2.2 D2 over CyanideL-20150220, and now it's booting fine.
I tried to take a logcat while it was booting with adb logcat>logfile but I got the message -waiting for device- and nothing more. The logifle was empty. Is there another way to take a boottime logcat? My recovery is TWRP 2.8.4.0.
Thanks, @rogersb11, for all your work on this.
Click to expand...
Click to collapse
Yea this seems to be a very random issue. Geeky himself has this on a previous kernel I gave him. After failed boot you can boot straight to recovery and pull the last_kmsg. I can't remember exactly the command but a quick search will tell you. That's the kernel log
3.0 running great on Oct-L. Awesome work!
rogersb11 said:
Yea this seems to be a very random issue. Geeky himself has this on a previous kernel I gave him. After failed boot you can boot straight to recovery and pull the last_kmsg. I can't remember exactly the command but a quick search will tell you. That's the kernel log
Click to expand...
Click to collapse
I tried this but there was no last_kmsg. I did get one from a successful boot with the 2.2-D2 kernel; that one said "no errors" at the bottom. But I guess it doesn't get far enough to even create the kmsg file with the 3.0 kernel. The last time I tried it stayed on the Samsung flash screen with the LED pulsing blue for about 10 minutes before I pulled the battery.
pixbuf said:
I tried this but there was no last_kmsg. I did get one from a successful boot with the 2.2-D2 kernel; that one said "no errors" at the bottom. But I guess it doesn't get far enough to even create the kmsg file with the 3.0 kernel. The last time I tried it stayed on the Samsung flash screen with the LED pulsing blue for about 10 minutes before I pulled the battery.
Click to expand...
Click to collapse
If it stays on the Samsung screen very long at all then it's just not gonna boot. Well that's unfortunate man, 3.0 is a massive improvement. Not sure how to help you since almost all haven't had this issue. Maybe next build will work for you. Not sure what else I will add but I'm sure I'll find something. Anybody have any requests?
rogersb11 said:
If it stays on the Samsung screen very long at all then it's just not gonna boot. Well that's unfortunate man, 3.0 is a massive improvement. Not sure how to help you since almost all haven't had this issue. Maybe next build will work for you. Not sure what else I will add but I'm sure I'll find something. Anybody have any requests?
Click to expand...
Click to collapse
You're awesome, I know I'll be happy when a new build comes out that works. Fiops please, and I don't know if f2fs support for sdcard would work but that seems like the best file format for an sdcard to me. :good:
JDC2389 said:
You're awesome, I know I'll be happy when a new build comes out that works. Fiops please, and I don't know if f2fs support for sdcard would work but that seems like the best file format for an sdcard to me. :good:
Click to expand...
Click to collapse
I'll look into fiops. F2fs should work on an sdcard. Kernel supports f2fs cache and data so internal and external should work that way
Cool stuff, I flashed the newest twrp recovery and latest modem/baseband NJ1 using Exodus rom from team Vanir http://www.vanir-exodus.net/exodus/d2att/ shift kernel 2.2 works sortof, zzmoove hardlocks the phone and xposed alpha won't work[works on exo kernel]. 3.0 is broken for me still on a clean flash the splash loads this time then after a bit the screen goes black, oddly enough touching the power button causes a vibrate but other then that phone won't wake. Phone is unresponsive from pc side using adb logcat etc when on 3.0 so I don't know how I would report any bugs.
Related
[ 02/09/2012: Screen Flicker / Brightness is an issue. I'll be looking at it. ]
Hi guys,
In an attempt to help further kernel development for the Kindle Fire, I'd like to share my stock defconfig. It's a bit different than the original otter_android_defconfig that g1011999 came up with.
I was never able to get a usable kernel. So I took some time and built up mine.
https://github.com/KFire-Android/kernel_omap/blob/stock/arch/arm/configs/otter_android_defconfig
This kernel builds using the preferred TI compiler used in all of their walk-thrus: CodeSourcery 2010-q1
Moving forward into CM9/ICS, some changes need to happen to the kernel over time. The migration kernel is found in a branch: "L27.13.1-ICS". The END result of this will be a kernel / source that fully support hw codecs for ICS.
[02/08/2012] FLASH ZIP FOR THOSE RUNNING NIND'S BUILDS: http://bit.ly/xYOf0V
The following ROM is built from the sources at GitHub under the KFire-Android org. Many of those files and configurations are the result of countless hours of development by JackpotClavin. I don't want there to be any confusion as to who put in a ton of time getting this to work.
[02/09/2012] FULL ROM INSTALL: http://bit.ly/ygVvQB
Changelog:
- Screen flicker IS an issue right now. Digging into it
- Touchscreen "Slop" set to 16. This should help touches register on the touchscreen.
- Working Data usage stats (xt_qtaguid / xt_quota2 kernel modules)
- TUN, CIFS support
- USB mounting fixes
Thanks Hashcode, currently building a latest ICS version of it.
A little note for those who also want to compile: arm-eabi-4.4.3 and arm-eabi-4.4.0 did not work for me, they ended the compile without any errormessage in the middle of nowhere, arm-eabi-4.3.1 did the job. Took me some time to figure that out ...
nind said:
Thanks Hashcode, currently building a latest ICS version of it.
A little note for those who also want to compile: arm-eabi-4.4.3 and arm-eabi-4.4.0 did not work for me, they ended the compile without any errormessage in the middle of nowhere, arm-eabi-4.3.1 did the job. Took me some time to figure that out ...
Click to expand...
Click to collapse
If you want to follow a very good step by step guide for setting this up the same way TI (the CPU maker) intended, then follow this:
http://www.omappedia.com/wiki/PandaBoard_L27.12.1-P2_Release_Notes#Setting_up_build_environment
Obviously, that's for PandaBoard, but the Toolchain source and setup are very good.
It goes into deep sleep for me and turning off the stay awake option in settings, developer options, the screen goes off like its supposed to.
Hashcode said:
Hi guys,
In an attempt to help further kernel development for the Kindle Fire, I'd like to share my stock defconfig. It's a bit different than the original otter_android_defconfig that g1011999 came up with.
I was never able to get a usable kernel. So I took some time nd built up mine.
https://github.com/KFire-Android/kernel_omap/blob/stock/arch/arm/configs/otter2_android_defconfig
This kernel builds using the preferred TI compiler used in all of their walk-thrus: CodeSourcery 2010-q1
Tonight, I'll go back to both of my in-progress kernels and do some testing to see if they'll boot.
EDIT:
Current issues being looked at with this kernel:
- Power off doesn't really power all the way down. It goes to a black screen, but requires long press to turn off.
- Deep sleep isn't happening. The backlight is on a tad while the screen should be off.
But this config is still MUCH better than trying the original.
Click to expand...
Click to collapse
So does this boot cm7 or anything? My kernel builds boot stock kindle but not cm7
Its something to do with netd/dnsproxyd. Just finding a fix that works is a PITA common issue, but then people dont say how they fixed it..
Right now ive only tested this with CM9
Sent from my DROID RAZR using XDA App
touch points
Any chance you're looking into enabling more than 2 touch points in this kernel?
foxdog66 said:
It goes into deep sleep for me and turning off the stay awake option in settings, developer options, the screen goes off like its supposed to.
Click to expand...
Click to collapse
I'm running nind/sitic's cm9-02-04 build with this kernel baked in. I, too, have Stay Awake disabled in Developer Options, and my Kindle is going into deep sleep. I am experiencing the power down issue, though.
It's something I'm absolutely willing to live with for the time being. This is good stuff. Thanks Hashcode!
jabdo79 said:
Any chance you're looking into enabling more than 2 touch points in this kernel?
Click to expand...
Click to collapse
Thats really the future of this kernel. I needed a solid base to start from.
Sent from my DROID RAZR using XDA App
Well reason I asked was because my kernel wont boot cm7 or cm9. It boots the stock kindle fire os okay. Im getting netd/dnsproxyd errors in the kernel when I try booting cm7.
death2all110 said:
Well reason I asked was because my kernel wont boot cm7 or cm9. It boots the stock kindle fire os okay. Im getting netd/dnsproxyd errors in the kernel when I try booting cm7.
Click to expand...
Click to collapse
Right now the difference between this kernel and stock is:
- About 8 ip6 netfilter modules were added
And that's about it.
death2all110 said:
Well reason I asked was because my kernel wont boot cm7 or cm9. It boots the stock kindle fire os okay. Im getting netd/dnsproxyd errors in the kernel when I try booting cm7.
Click to expand...
Click to collapse
Are you using the stock ramdisk or the modified ramdisk for cm? I know there must be a difference, as intersectRaven puts out several different variations of his kernel in boot.img form, but I haven't gotten around to diffing them yet
wdfowty said:
Are you using the stock ramdisk or the modified ramdisk for cm? I know there must be a difference, as intersectRaven puts out several different variations of his kernel in boot.img form, but I haven't gotten around to diffing them yet
Click to expand...
Click to collapse
ill look into insectraven's cm kernel thanks!
Edit: That worked! Thanks!
he starts the dnsproxyd differently than what I've seen. But it works!
So I noticed that /mnt/ is mounted read-only which causes issues with apps installing to the sdcard and probably the issue people are having with mounting the sdcard to the computer. Some apps insist on installing to the sdcard (I hate that)
Edit: or do I have this all wrong? Lol I'm no dev remounting it r/w gets the job done.
Is there any websites or anything that you guys would recommend to learn about the Linux kernel and development of it?
Tonight, I went back through and cleaned up my config some more. Removed extra power controls, usb mtp settings and omap mmc host controller (for sd card slot boards).
From my tests, everything deep sleeps correctly and the power off issue is fixed.
https://github.com/KFire-Android/kernel_omap
will you be posting a installable zip or boot.img? I'm running nind's cm9-02-05 build which has this kernel and its by far the most stable for me. I would like to update without waiting for someone to include it in a rom please
foxdog66 said:
will you be posting a installable zip or boot.img? I'm running nind's cm9-02-05 build which has this kernel and its by far the most stable for me. I would like to update without waiting for someone to include it in a rom please
Click to expand...
Click to collapse
I'll see what I can do. boot.img would be ok?
Sent from my XT912 using XDA App
Hashcode said:
I'll see what I can do. boot.img would be ok?
Sent from my XT912 using XDA App
Click to expand...
Click to collapse
Yeah that's cool.
foxdog66 said:
Yeah that's cool.
Click to expand...
Click to collapse
Here's an updated boot.img for nind's 2/5 build:
[ UPDATED OP W/ FLASH.ZIP FILE ]
Android version: 4.4.2
Baseband version: I317UCUCNJ1
Build number: KOT49H.I317UCUCNJ1
ROM is NE5 patched with the NJ1 OTA. Rooted, Deodex'd, and Zipaligned
Thanks and Credit to @Zen Arcade for his Auto-deodexer
Added Tethering patch, Screenshot edit, and Quad-MultiWindow
No N3, N4 or S5 stuff. No Theming. Not sure if I'll go there on this ROM.
ButtNaked I317UCUCNJ1
https://www.androidfilehost.com/?fid=95784891001615960
MD5: d969d68f31c7ddb0d4b45292ada4a7a3
Almost Naked ROM IS POSTED BELOW. It has the stuff removed from ButtNaked.
Like Books, Flipboard, Magazines, SVoice, etc. All ATT crap will be stripped out.
I'm still learning what the changes were on NJ1. The camera feels like it takes pictures faster, a little quicker to respond for the next pic.
INSTALLATION
Instructions are the same as any other Custom ROM.
If you are on stock kernel it will probably hang. It should not if you are on AGNi kernel.
Download for AGNi kernel
http://forum.xda-developers.com/devdb/project/?id=2368#downloads
PSN_AGNi_pureSTOCK-v4.2.8_N7105_4.4.x_AROMA.zip
IT IS NOT RECOMMENDED TO FLASH Version 4.3.0 YET ! So use the 4.2.8 listed above
Great information is located here. Section 7 is How To Guides and References
http://forum.xda-developers.com/showthread.php?t=1987541 Credit @Bajanman
Custom Recovery
TWRP (TeamWiinProjects)
http://techerrata.com/browse/twrp2/t0lteatt (Zip is flashable, Tar is ODIN)
PhilzRecovery
http://forum.xda-developers.com/showthread.php?t=2159652
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/ (Latest version looks like 6.48.6. I have 6.41.6 on my phone. I will test with that) Either one should work fine.
Install instructions: Credit: ATT DN5 Team @sawdoctor and @Bajanman
You need to have Samsung 4.3 Bootloader or newer.
Make sure you have the latest TWRP/CWM recovery installed.
Next, remember to backup your apps and your efs folder. That's something that you always should do before flashing anything.
Go to TWRP/CWM recovery via pressing home + power + volume up button at the same time.
Make a Nandroid backup of your working system, if you haven't done so.
Its best to do a clean install for any new Rom (clean installation recommended includes internal storage)
In TWRP Recovery hit wipe, and slide to factory data reset system. (Internal won't be touched fyi)
In PHILZ Recovery Format Internal SDCard (in mounts and storage) and do Factory reset (I will install a new ROM option in PhilZ)
(Reminder) Remember that everything you flash you do it at your own risk so do your research before flashing anything!!
Now find the location of the Rom on your external and install it.
Flashing the Rom zip.
It should take less than 10 minutes till it boots...
AlmostNaked I317UCUCNJ1
Android version: 4.4.2
Baseband version: I317UCUCNJ1
Build number: KOT49H.I317UCUCNJ1
ROM is NE5 patched with the NJ1 OTA. Rooted, Deodex'd, and Zipaligned
Thanks and Credit to @Zen Arcade for his Auto-deodexer
Added Tethering patch, Screenshot edit, and Quad-MultiWindow
No N3, N4 or S5 stuff. No Theming. Not sure if I'll go there on this ROM.
- SuperSu updated to 2.3.6 (After boot it will prompt to update binary, choose Normal not CWM) Credit: Chainfire
- AGNi kernel added V 4.2.8
- AGNi optimal settings added (I did back the Max CPU Freq back to stock 1600MHz)
* use AGNi control app to change other setings
- TW StereoSound & InCall Fix added
- Bootanimation.zip support (find a boot animation you like, drop it in /system/media change permissions to rw-r-r)
- Gmail 5.0 (15609867) Open it and it will require Google Play services to be updated.
- Google Calendar 5.0 (1579230) (under data/app) Can be removed
- Google Drive, Hangouts and Maps will need to be updated
- Everything else is current as of 11/28/2014
-- SVoice, Samsung Calendar, Google Books, Google Newstand, Flipboard and Group Play are not system apps so you can uninstall if you like.
But then you'd be ButtNaked......
AlmostNaked I317UCUCNJ1
https://www.androidfilehost.com/?fid=95832962473394667
MD5: cd3403d69995c9c4795307bfd8a6d3d9
See Post #4 for Small Update
INSTALLATION
Instructions are the same as any other Custom ROM.
Great information is located here. Section 7 is How To Guides and References
http://forum.xda-developers.com/showthread.php?t=1987541 Credit @Bajanman
Custom Recovery
TWRP (TeamWiinProjects)
http://techerrata.com/browse/twrp2/t0lteatt (Zip is flashable, Tar is ODIN)
PhilzRecovery
http://forum.xda-developers.com/showthread.php?t=2159652
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/ (Latest version looks like 6.48.6. I have 6.41.6 on my phone. I will test with that) Either one should work fine.
Install instructions: Credit: ATT DN5 Team @sawdoctor and @Bajanman
You need to have Samsung 4.3 Bootloader or newer.
Make sure you have the latest TWRP/CWM recovery installed.
Next, remember to backup your apps and your efs folder. That's something that you always should do before flashing anything.
Go to TWRP/CWM recovery via pressing home + power + volume up button at the same time.
Make a Nandroid backup of your working system, if you haven't done so.
Its best to do a clean install for any new Rom (clean installation recommended includes internal storage)
In TWRP Recovery hit wipe, and slide to factory data reset system. (Internal won't be touched fyi)
In PHILZ Recovery Format Internal SDCard (in mounts and storage) and do Factory reset (I will install a new ROM option in PhilZ)
(Reminder) Remember that everything you flash you do it at your own risk so do your research before flashing anything!!
Now find the location of the Rom on your external and install it.
Flashing the Rom zip.
It should take less than 10 minutes till it boots...
MODz n ADDz
[MOD]AOSP/TW StereoSound & InCall Fix Note2 (TWRP/CWM flashable.zips) by @gregsarg
LINK http://forum.xda-developers.com/showpost.php?p=57026975&postcount=1
SHIFT Kernel 3.8.1 CREDIT: @rogersb11
[KERNEL][SHIFT][SINGLE/DUAL][TW/CM]11/29/14[LINARO]
Shift Dual Boot/ TW and CM Kernel
http://forum.xda-developers.com/galaxy-note-2/development-n7105/kernel-08-15-14-t2849082
This kernel supports both TouchWiz and ALL of AOSP other than maybe Pac Rom but it is not my fault it isn't supported lol. They use their own name in the framework instead of the one EVERYBODY else does.
CPU GOVERNORS: lazy, smartass, smartassV2, ondemand, powersave, interactive, performance, userspace, pegasusq, zzmoove
I/O GOVERNORS: deadline, cfq, row, sio
default cpu governor: ondemand
default I/O governor: cfq
CIFS & NFS Network FileSystems
F2FS/EXT4
kernel uses LZMA compression
OverClock to 2160
CPU Voltage Control
GPU OC, UC and Voltage Control
Boeffla Sound 1.6.6 (Use the control app from the play store)
Charge Control
TouchWake and Timeout support
Slide2Wake
DoubleTap2Wake
Mdnie HiJack
Dynamic Fsync Control
Kernel gesture support
Latest source updates
Compiled with Linaro GCC 4.9.2
STweaks is included for kernel configuration
https://www.androidfilehost.com/?fid=95784891001616471
AGNi Kernel
http://forum.xda-developers.com/devdb/project/?id=2368#downloads
Credit - psndna88
I'm running 4.2.8
PSN_AGNi_pureSTOCK-v4.2.8_N7105_4.4.x_AROMA.zip
https://www.androidfilehost.com/?fid=95784891001615962
Credit - psndna88
AGNi_settings_backup.zip (settings to try) Unzip copy to /system/etc/init.d
https://www.androidfilehost.com/?fid=95747613655042683
Credit - terpin32
Xposed Installer Credit : Author(s): rovo89, Tungstwenty
This is the installer for the Xposed framework, which is a requirement for all modules.
Xposed is a framework for modules that can change the behavior of the system and apps without touching any APKs. That's great because it means that modules can work for different versions and even ROMs without any changes (as long as the original code was not changed too much). It's also easy to undo. As all changes are done in the memory, you just need to deactivate the module and reboot to get your original system back. There are many other advantages, but here is just one more: Multiple modules can do changes to the same part of the system or app. With modified APKs, you to decide for one. No way to combine them, unless the author builds multiple APKs with different combinations.
http://repo.xposed.info/module/de.robv.android.xposed.installer
Xposed Module Repository
http://repo.xposed.info/module-overview
511 modules
ANIMATION TRANSITION:
Too add little more speed and smoothness on the transition you can change these settings.
- Go to System Settings then tap About Device.
- Touch Build Number until it says Developers Options Enabled
- Hit Back Button
-Select Developers Options, Scroll Down to
- Window animation scale 1x (default) change to Window animation scale .5x
- Transition animation scale 1x (default) change to Transition animation scale .5x
- Animator duration scale 1x (default) change to Animator duration scale .5x
ALMOSTNAKED FIXES <----------- Download
Thanks to @DoctorQMM for catching them (CSC, Multiwindow,Google Play) !
Tethering fix added also Thanks @kebran
Thanks my friend. ..g
black screen after flash. ill try flashing bn v1 then this. using twrp 2.8.0.0
update- flashing the ne5 buttnaked v1 rom first then dirty flashing ButtNaked I317UCUCNJ1 worked. test driving now. looks great awesome work
funtimez said:
black screen after flash. ill try flashing bn v1 then this. using twrp 2.8.0.0
update- flashing the ne5 buttnaked v1 rom first then dirty flashing ButtNaked I317UCUCNJ1 worked. test driving now. looks great awesome work
Click to expand...
Click to collapse
Thanks. It was late last night and was too tired to post instructions..
But I'm running TWRP 2.7.2.2, have been all through testing this week and it's worked also.
I do full wipe. (Dalvik Cache, Cache, System, Data, Internal Storage)
Boots up everytime.
@dicksteele
Thanx for yet another contribution to the noté2 community...:good:
Excellent work Mr steel..
You definitely need to use your skill to build aosp 5.0 if you can. Awesome work to keep this forum alive.
One Man Army !!!! Thank you for all you do sir.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Mentioned last night in PM but NICE work!!!
rob_z11 said:
You definitely need to use your skill to build aosp 5.0 if you can. Awesome work to keep this forum alive.
One Man Army !!!! Thank you for all you do sir.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
What the hell. Set up environment. REPO SYNC going now.
rogersb11 said:
Mentioned last night in PM but NICE work!!!
Click to expand...
Click to collapse
Mentioned?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
dicksteele said:
What the hell. Set up environment. REPO SYNC going now.
Click to expand...
Click to collapse
Well look forward to try if you ever need anyone. Thanks again for efforts like you and Roger and others which are frequent.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I'm excited about this build...and plan to heavily abuse it...lol
dicksteele said:
Thanks. It was late last night and was too tired to post instructions..
But I'm running TWRP 2.7.2.2, have been all through testing this week and it's worked also.
I do full wipe. (Dalvik Cache, Cache, System, Data, Internal Storage)
Boots up everytime.
Click to expand...
Click to collapse
funtimez said:
black screen after flash. ill try flashing bn v1 then this. using twrp 2.8.0.0
update- flashing the ne5 buttnaked v1 rom first then dirty flashing ButtNaked I317UCUCNJ1 worked. test driving now. looks great awesome work
Click to expand...
Click to collapse
So does this mean that you have to flash the ne1 ROM (buttnaked or full) before flashing this one? Also, how has agni kernel been behaving on 4.4 lately? I shied away from using it because of all the freezes and reboots awhile back. I'm using a 4.4 ROM whose kernel is stock based right now, but the network type within the APN keeps switching LTE off on me, and it's driving me nuts. I love it, but I also love your ROMS, I used your mk6 ROM for a very long time and always keep it in my back pocket. I might give this NJ1 build a shot, since it's an ATT base. Thanks in advance. ?
chris.l.naish said:
So does this mean that you have to flash the ne1 ROM (buttnaked or full) before flashing this one? Also, how has agni kernel been behaving on 4.4 lately? I shied away from using it because of all the freezes and reboots awhile back. I'm using a 4.4 ROM whose kernel is stock based right now, but the network type within the APN keeps switching LTE off on me, and it's driving me nuts. I love it, but I also love your ROMS, I used your mk6 ROM for a very long time and always keep it in my back pocket. I might give this NJ1 build a shot, since it's an ATT base. Thanks in advance. ?
Click to expand...
Click to collapse
I used the NE5 as base and patched the NJ1 OTA. So you can just flash it all by itself. It does not have the kernel, but it does have the NJ1 modem.
DoctorQMM has been chatting with Bajanman and he suggested do not go over 4.2.8 kernel.Doc has been running it for a few days and it's doing fine on his phone. But you know, every phone acts different.
I've been running 4.2.5 since it came out. I just loaded 4.2.8 last night. It's running good. I may add it to an update, only thing I see right now is removing a couple of Knox files I missed.
I'm messing with the AOSP 5.0, should be done with the Almost Naked today or tomorrow. Thought I was done last night until I flashed it.
I lost track of my builds ober the last week and the build I'm messing with had the newer Play services and store.
It was a train wreck when I tried to get into Play sotre.. Updates worked fine and it's running now, but it's half assed if I release it like it is.
I dirty flashed this over the ne5 buttnaked v1 I had installed, and it works flawlessly. I had some crashes on the ne5, but none so far on this rom. Thanks Dev...because of you guys, I don't have a need update my Note 2. Much appreciated.
RuKuS4Life said:
I dirty flashed this over the ne5 buttnaked v1 I had installed, and it works flawlessly. I had some crashes on the ne5, but none so far on this rom. Thanks Dev...because of you guys, I don't have a need update my Note 2. Much appreciated.
Click to expand...
Click to collapse
No worries. Glad it worked.
Just out of curiosity, I did a clean install of this rom, but got the black screen as well. I had to dirty flash over the n5 butnaked rom. Not sure why this is, but thought I should mention it as well.
RuKuS4Life said:
Just out of curiosity, I did a clean install of this rom, but got the black screen as well. I had to dirty flash over the n5 butnaked rom. Not sure why this is, but thought I should mention it as well.
Click to expand...
Click to collapse
Did you install anything between the flashes? The only difference really is the NJ1 Buttnaked does not have a kernel and the NE5 does.
chris.l.naish said:
So does this mean that you have to flash the ne1 ROM (buttnaked or full) before flashing this one? Also, how has agni kernel been behaving on 4.4 lately? I shied away from using it because of all the freezes and reboots awhile back. I'm using a 4.4 ROM whose kernel is stock based right now, but the network type within the APN keeps switching LTE off on me, and it's driving me nuts. I love it, but I also love your ROMS, I used your mk6 ROM for a very long time and always keep it in my back pocket. I might give this NJ1 build a shot, since it's an ATT base. Thanks in advance. ?
Click to expand...
Click to collapse
Use my 3.8.1 kernel. Super solid and stweaks is packed. Just fixed a boot issue with TW as it's dual boot but I've been running it on my Saber rom and it's been flawless. No SOD or RR. Kernel has updated LTE modem firmware too. Gave me an extra bar at home where I consistently had been getting only one. Make sure to get build 3.8.1 from AFH and not 3.8 on xda. I haven't been able to upload to xda for 3 days
Sent from my SGH-I317 using XDA Premium 4 mobile app
AOSP RIN Kernel for D851
Close to stock with some sugar added ... delicous!
Hey guys and girls,
here is my attempt to build up on the cm source for an modified AOSP kernel, hope you like it, have fun
First of, DISCLAIMER, I'm not responsible for bricked devices, dead unicorns, rainbows with missing colors, world war, nose bleed, void warranty (you know that already, don't you? your warranty is void now and it's your fault ) or any other harm happening to your device, you or people around you!
What does it serve? (Features)
AnyKernel
Kexec Hardboot patch
FauxSound support
OC to 2.7GHz and UC support
Voltage control
Intelliplug
Cpu limiter
GPU Overclocking to 675Mhz
Simple GPU Algorithm
Simple_ondemand GPU Governor fixed
fsync on/off support (on by default)
Power efficient workqueues
Dynamic management of dirty page writebacks
Dynamic Read Ahead
IO Schedulers
CFQ
DEADLINE
FIFO
FIOPS
NOOP
ROW (default)
SIO
TRIPNDROID
VR
ZEN
Governors
Adaptive
Conservative
DanceDance
Intelliminmax
Interactive (default)
Lagfree
Lionheart
OnDemand
Performance
Powersave
SmartassV2
Userspace
Wheatley
Smartmax
TCP Congestion Algorithms
BIC
Westwood+
Vegas
Veno
Yeah
HTCP
Cubic (default)
Reno
LiveSharpening
2-Way Call Recording support
exFat support
DriveDroid support
KSM
android logger sysfs toggle (disabled by default)
Many under the hood fixes
Stability
More to come
How to apply it? (Installation)
IMPORTANT: Read through all the requirements, steps and warnings before you do anything, if any requirement doesn't match or you don't know what one or more of the steps below mean or do, ask before you do any of them, if you don't know how all the steps can be done, let it be, I warned you, if you don't do and something bad happens, I'll just laugh at you!!
Requirements? Yes!
D851
Custom Recovery
AOSP based lollipop ROM (Mainly cm12 based)
How to flash the kernel?
BEWARE to be on the default kernel of the given ROM (NO custom, except at updates of this one!!) when flashing this kernel, the ramdisk is taken from the currently flashed kernel!!!
Download zip
Place on internal or external SD
Reboot to recovery
Choose install zip
Search for the downloaded zip
Confirm flashing
Wipe cache
Reboot
Have fun
Changes? (Changelog)
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
13.01.2015/1.6
Initial AOSP release
Full list of commits can be found here
Where to get it from? (Download)
google drive | AndroidFileHost | dev host
Let me test!! (Beta Testing Community)
Google+ LG G3 Beta Testing Community
Show me the so(u)rce(ry)! (Source Code)
https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Donators (huge thanks, you're simply great )
@Toneman07
@Helloworld294
@shaarky
@Dreamxtreme
@guyd
@mosincredible
@tobitege
@AndroidUzer
Credits
XDA for the great community
Google for their great operating system
LG for the great device
CyanogenMod for the base this is built up from
@invisiblek for his marvelous job on the bring up of the device and the many patches
@HolyAngel for some commits I used
@faux123 for his great work with intelli* and beyond
@KAsp3rd for some commits I used
@myfluxi for some commits I used
@trialsrider1 for some commits I used
@Skin1980 for his breakthroughs at our device, his support and for being such a nice guy
@Lord Boeffla for some commits I used
@GuneetAtwal for some commits I used
@DooMLoRD for some commits I used
@Fechinator for some commits I used
@savoca for AnyKernel, Livesharpening and some other stuff
@Christopher83 for his implementation of Dynamic management of dirty page writebacks and some additional stuff
If you like my work, please show your appreciation by pressing the thanks button, if you want to do more, i've nothing against a little donation, but I'm as happy when you just thank me by pressing the button
XDA:DevDB Information
Rin Kernel AOSP, Kernel for the T-Mobile LG G3
Contributors
Tectas
Source Code: https://github.com/tectas/android_kernel_lge_msm8974ac/tree/rin-cm-12.0
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.6.5
Beta Release Date: 2015-01-14
Created 2015-01-14
Last Updated 2015-01-14
Reserved
Awesome thanks. Heard good things about your STK LG kernel. Downloading
razrlover said:
Awesome thanks. Heard good things about your STK LG kernel. Downloading
Click to expand...
Click to collapse
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
arifqur said:
Super addition to the D851 arsenal.
Thanks
P.S: Can't seem to find it in the downloads!
Click to expand...
Click to collapse
Sorry, link fixed.
Tectas said:
Sorry, link fixed.
Click to expand...
Click to collapse
Thanks for the link and especially thanks for being the first Dev to include kexec hard boot patch for D851 in his kernel
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Tectas said:
Small update to 1.6.5:
14.01.2015/1.6.5
FauxSound support added
Dynamic read ahead
Download within the OP, have fun
Click to expand...
Click to collapse
Thanks
Working well so far, thanks :good:
marcdw said:
Heh, I managed to screw up my MultiROM setup.
Fusion LP was a tertiary ROM. I decided to flash this kernel against it. Almost 10 minutes and it never finished flashing. TWRP was also frozen.
On restart none of the ROMs would boot. Trying to reselect Fusion in MultiROM would fail and freeze/lock TWRP. Seems the partition with Fusion got corrupted.
Got tired of pulling the battery so wound up restoring primary ROM and will start over with MultiROM.
Just one of those things probably unrelated to the kernel itself.
I should have at least backed up the secondary ROM. Oh well. ?
Click to expand...
Click to collapse
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Never mind.
Working well with Euphoria.
Thanks for a great AOSP kernel
joshuajones said:
I'm using it with Fusion as primary ROM with no problems. But flashing fusion itself takes close to ten minutes to flash, and the progress bar shows nothing until it's done. I was already on fusion, then flashed RIN and Multirom.
Click to expand...
Click to collapse
I changed my primary SkyDragon ROM then reflashed kexec kernel and multirom. Discovered my CM11 was still there (cool) then reflashed Fusion.
Flashed RIN kernel but this time I waited. It took much longer than the ROM install.
But all is good. Fusion seems to be running great with RIN.
Thanks.
Sent from my LG-D851 using Tapatalk
Kernel is working great
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Nothing says great batterylife except when it tells me 1 day 19 hours and hasnt been on a charger since 8 am
Nice kernel exelent battery and no complains for now ?
Been off charger all day with light use and its still going strong
scribbles92 said:
I've used this Kernel on about 3 different LP ROM's (clean flash) and on each of them, the pull down menu appears and freezes after ending calls whether its being made or receiving them. If you are able to get out of the menu, the pull down no longer works. You must reboot for everything to return to normal...
Click to expand...
Click to collapse
Done a few clean flashes since I started using this kernel but I'm not having this problem...
BOFE Overview
Only for Sprint S6 - 920P - zerofltespr
CFQ default scheduler - other available scheduler - noop
Interactive default governor
Bic default TCP congestion algorithm
Deep sleep fix
ZSwap/Zram implemented
No OC/UV, this will not change...
TWRP Flashable zip, ODIN Flashable TAR, and IMG
Make sure you have OEM Unlocking enabled in Developer Options before flashing kernel...
Download
https://www.androidfilehost.com/?w=files&flid=35509
Thanks to:
@KTOOnez
@g.lewarne
and others...can't think of who else to thank...will update when I remember...
Known Issues: Video playback errors and inability to play movie/shows purchased from Playstore in both YouTube & Play Movies & TV app
BOFE Kernel Source
AOE2 Kernel Source
AOE2 ramdisk
BOFE
0719
Swappiness set to 60
Zram being used ~512MB
Zswap compressor - Snappy
Interactive stuffs
Move ZRam from staging to block
920P now being built using 925P source...also being used to build 920/925R4
AOE2 Overview
Only for Sprint S6 - 920P - zerofltespr
Upstream patched up to 3.10.82
CFQ default scheduler - other available schedulers (Deadline, noop, and SIO)
Interactive default governor - other available governors (Ondemand and Performance)
Westwood default TCP congestion algorithm
Deep sleep fix
No OC/UV, this will not change...
TWRP Flashable zip
It's a basic kernel based off of AOE2 sources that I use and thought I would share...updates will depend on release of 5.1.1...
If you have an issue, please provide ROM you are using and a log (/proc/last_kmsg), if you can...
0701
Ramdisk: Interactive and DHA tweaks
Also attaching "interactive.txt"...must be opened as a script...you can run it with a script manager (must be ran as su) like SManager
Information about Interactive Governor settings
If you'd like to share you're settings, definitely welcomed :good:
I'll probably develop an app or something in the future, it's already in the works, just haven't had time to tackle it yet...
md5 hash - aa1a5ab74a3ea5b16606d1a2fa525bd1
0630
Patched up to 3.10.82
Made CFQ default scheduler
Building kernel modules
md5 hash - bedda37ce94ed916fb3907d2b8558627
0629
Initial release
md5 hash - 35997addb1f2480e34d04b8e0bc1f6e1
So far so good... Seems to be running better than KT kernel for me. I had quite some lag with that one on a rooted stock rom.
@djvoleur What is the advantage of this kernel over the stock OE2 kernel? Faster/better performance, better battery..?? Thanks
JoeFCaputo113 said:
@djvoleur What is the advantage of this kernel over the stock OE2 kernel? Faster/better performance, better battery..?? Thanks
Click to expand...
Click to collapse
That's the goal ?
Ill give it a shot. Will report back with how it goes.
tempted to try this sense we've only got one kernel on the Edge besides stock but it lags when a video shows up would this one work?
It works with Sac Rom v3. I dirty flashed over Kt Kernel with no problem. Ktweaker and moniter are still there. OP credited Ktoonsez so not sure if thats intentional or not.
I have noticed no difference between this an Kt Kernel 5/28 so far.
Lag on opening video/webm persist
Thoth33 said:
It works with Sac Rom v3. I dirty flashed over Kt Kernel with no problem. Ktweaker and moniter are still there. OP credited Ktoonsez so not sure if thats intentional or not.
I have noticed no difference between this an Kt Kernel 5/28 so far.
Lag on opening video/webm persist
Click to expand...
Click to collapse
Give me an example of a video that lags...
The videos themselves dont lag, there is a lag whenever I try to open one. It just stops for a second or two when I open one, then the video starts. I am using MX player if thats relevant. It might be on my end.
Thoth33 said:
The videos themselves dont lag, there is a lag whenever I try to open one. It just stops for a second or two when I open one, then the video starts. I am using MX player if thats relevant. It might be on my end.
Click to expand...
Click to collapse
Same issue and I'm not using that app. I think everyone noticed the lag with Facebook. If autoplay setting is enabled, the app is unusable. But even when you turn it off, if you try to select a video to watch, it freezes for a few seconds and then plays. We don't have access to a stock kernel to know whether it's the Rom or Kernel though. The issue doesn't exist when fully stock though.
southernstyle said:
Same issue and I'm not using that app. I think everyone noticed the lag with Facebook. If autoplay setting is enabled, the app is unusable. But even when you turn it off, if you try to select a video to watch, it freezes for a few seconds and then plays. We don't have access to a stock kernel to know whether it's the Rom or Kernel though. The issue doesn't exist when fully stock though.
Click to expand...
Click to collapse
Updated to be pretty similar to stock kernel...
I just flashed the updated version, figure its worth a try, my battery life on KToonz kernel hasnt been great thus far
I can say right now that I am experiencing improved battery life over KtKernel 5/28.
I will reccommend this to other G920P users.
Any opportunity to bless us with an Edge variant kernel? We're struggling over there with only 1 that's been provided. It does the trick and we're all so very grateful for it, yet curious to test out other kernels that may be suitable for it as well. If not, it's completely understandable. Thanks for all you're doing for the community!
Sent from my SM-G925P using Tapatalk
reesedizan said:
Any opportunity to bless us with an Edge variant kernel? We're struggling over there with only 1 that's been provided. It does the trick and we're all so very grateful for it, yet curious to test out other kernels that may be suitable for it as well. If not, it's completely understandable. Thanks for all you're doing for the community!
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
We shall see if I do, do it....it will be a blind build....I'll reach out to you
It's been updated, guys! :highfive:
Thank you so much!
Sent from my SM-G925P using Tapatalk
not sure what happened, but I shut my phone off each night, and put it on the charger, this morning it would not boot up, would just go to the Samsung Android start screen, couldnt even get into recovery, the only change I made was I flashed the update kernel here, odd thing is, the phone was running fine before I powered it down. I had to Odin back to stock this morning, which is where I sit now, debating on taking the 5.1.1 update
scott_0 said:
not sure what happened, but I shut my phone off each night, and put it on the charger, this morning it would not boot up, would just go to the Samsung Android start screen, couldnt even get into recovery, the only change I made was I flashed the update kernel here, odd thing is, the phone was running fine before I powered it down. I had to Odin back to stock this morning, which is where I sit now, debating on taking the 5.1.1 update
Click to expand...
Click to collapse
If you could open the terminal and type:
su (grant root access)
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
If you could share this...that would be awesome...
Disregard that...you said you're back on stock...blah lol
I ran into an issue similar to yours awhile back...it was due to not using the stock charger...
Sent from my SM-G920P using Tapatalk
djvoleur said:
If you could open the terminal and type:
su (grant root access)
cat /proc/last_kmsg > /sdcard/last_kmsg.txt
If you could share this...that would be awesome...
Disregard that...you said you're back on stock...blah lol
I ran into an issue similar to yours...it was due to not using the stock charger...
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
unfortunately I went ahead and took the 5.1.1 update since I was back to stock, I am no longer rooted. I appreciate the work you put into these kernels man :good:
To God be the glory, It is finally here: Android N kernels!
@malacore had a good suggestion for me to get started on my AKLU kernels while I wait for more ram for my computer to make my own N builds. I started with JDCTeams's CM14, and hope to branch out to AOSP and others soon.
Feel free to comment if you have tried them on another rom, successful or not, or to leave feedback on these kernels as well. These can be flashed on any JF variant of phone, but I have only personally tested them on JFLTETMO.
Post #2: N kernels
Source: https://github.com/alaskalinuxuser/
Kernel Version 3.4.112
Post created: 11/02/16
Last updated: 9/5/17
Nougat kernels!
For AOKP 7:
(AOKP is now based on LineageOS)
https://www.mediafire.com/folder/h3p473al6xstx/kernels
For SlimRoms 7:
http://www.mediafire.com/file/s3v49439d9k5k1e/AKLU-SLIM-N-JFLTE-intelliplug-20170117.zip
For LineageOS 14.1:
http://www.mediafire.com/file/305w1rnap7qj2he/AKLU-LINEAGEOS-N-JFLTE-intelliplug-20160112.zip
For RR 5.8.0:
(RR is now based on LineageOS)
http://www.mediafire.com/file/0nq9p5qq5mx9q8u/AKLU-RR580-N-JFLTE-UPDATE-20170126.zip
For CM14 by the JDCTeam:
http://www.mediafire.com/file/9z097f1aox8pguu/AKLU-CM14-N-JFLTE-iosched-20161110.zip
Change Log:
20170619
-Added Faux Sound! Thanks @faux123
-Added fast charge!
20170524
-Added GPU and CPU voltage controls!
--> Control the CPU through Kernel Adiutor
--> Control the GPU with my GPU Voltage Control App.
https://forum.xda-developers.com/ga...gpu-voltage-control-app-aklu-kernels-t3506985
20170425
-Updated for 7.1.2 compatibility.
20170315
-Update for Substratum compatibility.
20170126
-Fixed WiFi hot-spot issue for AOKP and RR.
20170115
-Updated RR and AOKP kernel with LineageOS base, as they transitioned away from CM.
20161222
+ Added Intelliplug, an alternative hotplugging option made by @faux123.
20161220
+ No feature changes, just cleaning up a few things to help with RR 5.8.0
20161110
+ Added I/O Schedulers:
-->FIOPS
-->SIO
-->VR
20161102
+ Overclocked CPU to 1998 MHz.
+ Overclocked GPU to 487 MHz.
+ Added Governors:
-->SmartMax
-->Wheatley
-->LionHeart
Old Kernels:
http://www.mediafire.com/file/rzt412chq67b3av/AKLU-JFLTE-AOKP-N-20170425.zip
Screenshots!
Some screenshots of Kernel Aduitor with these kernels.
Awesome gonna give it a go and see but I'm sure will run/perform just fine
sent from my SGH-M919 BadAss TinkerToy
---------- Post added at 04:26 PM ---------- Previous post was at 04:09 PM ----------
have u tested with systemless root does it play nice the marshmallow dev worked great just wondering since supersu patches boot.img but I'll test it incase and let u know
sent from my SGH-M919 BadAss TinkerToy
Kernel seems to run fine I noticed no fauxsound or fast charge. Also didn't have all the same governors as other kernels u have. Web apps ran laggy but I think that's something with that rom. Also noticed on boot unlike ur marshmallow dev kernel it show not selinux enforcing. currently back on marshmallow it says only about kernel. Why is that on marshmallow it says permissive when full booted under about phone. I wonder if it's some flag or something supersu patches on marshmallow dev that it can't or isn't patching on the nought kernel. Because both ur rom and cm14.1 are both showing permissive fully booted under about phone with me changing nothing. Even ran getenforce to make sure.
sent from my SGH-M919 BadAss TinkerToy
dtriguero said:
Kernel seems to run fine I noticed no fauxsound or fast charge. Also didn't have all the same governors as other kernels u have. Web apps ran laggy but I think that's something with that rom. Also noticed on boot unlike ur marshmallow dev kernel it show not selinux enforcing. currently back on marshmallow it says only about kernel. Why is that on marshmallow it says permissive when full booted under about phone. I wonder if it's some flag or something supersu patches on marshmallow dev that it can't or isn't patching on the nought kernel. Because both ur rom and cm14.1 are both showing permissive fully booted under about phone with me changing nothing. Even ran getenforce to make sure.
sent from my SGH-M919 BadAss TinkerToy
Click to expand...
Click to collapse
Yes, I am still adding features, so fast charge, fauxsound, etc., are not added yet. Also it is not set to permissive when I made it for their ROM, because their default was enforcing. I can make it default permissive if needed when I make more adjustments. It is somewhat difficult working within their ROM to make my own kernel, so it will take some time to get all of the features put in.
that's funny cause the nought one boots with two errors on sammy logo not seandroid enforcing I think and kernel warranty bit as if is permissive but when boot mm dev kernel only shows kernel warranty bit on sammy screen as if enforcing during boot but permissive when finished boot. Also N shows permissive but did flash supersu before booting maybe it changed it. Steps was
Full wide-after backup of course
flash cm14.1
flash 7.1 micro gapps
flash ur N kernel
flash supersu 2.78 sr3- there rom flash 2.78 sr1
sent from my SGH-M919 BadAss TinkerToy
For now I am satisfied with Alucard kernel in OotCM14 but I'll be keeping an eye on this thread to see how things developed.
I do have one question, is your kernel based on stock cm kernel or Alucard?
Sent from my SGH-M919 using Tapatalk
Xplorer4x4 said:
For now I am satisfied with Alucard kernel in OotCM14 but I'll be keeping an eye on this thread to see how things developed.
I do have one question, is your kernel based on stock cm kernel or Alucard?
Click to expand...
Click to collapse
No worries!
Yes, my kernel is based on stock CM kernel. Alucard kernels are great, I have a lot of respect for Alucard kernels.
AlaskaLinuxUser said:
For CM14 by the JDCTeam:
http://www.mediafire.com/file/9z097f1aox8pguu/AKLU-CM14-N-JFLTE-iosched-20161110.zip
For AOKP 7:
http://www.mediafire.com/file/znzpjieflvb7q9r/AKLU-AOKP-N-JFLTE-iosched-20161110.zip
Change Log:
20161110
+ Added I/O Schedulers:
-->FIOPS
-->SIO
-->VR
Click to expand...
Click to collapse
To God be the glory, another successful addition to the N kernel! Just added a few I/O schedulers.
i see you are making kernels for aokp 7. i am wondering is there even an aokp 7 for us yet and if so where can i test it
gizm0luvsu said:
i see you are making kernels for aokp 7. i am wondering is there even an aokp 7 for us yet and if so where can i test it
Click to expand...
Click to collapse
I am guessing it was a typo and he meant aosp not aosp. No aokp rom yet that I know of.
Sent from my Pixel using Tapatalk
gizm0luvsu said:
i see you are making kernels for aokp 7. i am wondering is there even an aokp 7 for us yet and if so where can i test it
Click to expand...
Click to collapse
Xplorer4x4 said:
I am guessing it was a typo and he meant aosp not aosp. No aokp rom yet that I know of.
Click to expand...
Click to collapse
Actually, there is an AOKP 7.0 teaser download in the AOKP MM thread. No working calls yet.
AlaskaLinuxUser said:
Actually, there is an AOKP 7.0 teaser download in the AOKP MM thread. No working calls yet.
Click to expand...
Click to collapse
ahhh ok
Will u be adding all the goodies u had in ur MM Dev kernel to ur aokp N kernel
dtriguero said:
Will u be adding all the goodies u had in ur MM Dev kernel to ur aokp N kernel
Click to expand...
Click to collapse
Great question!
Yes, I plan to do that eventually, it may take me a while. There are some other pressing phone items that I need to fix first.
For some reason I tried flashing your aokp kernel on your new build and boot indefinitely. Could be me
smartt699 said:
For some reason I tried flashing your aokp kernel on your new build and boot indefinitely. Could be me
Click to expand...
Click to collapse
Hmmm... It did test good here. However, I let AOKP N boot fully, then went back to recovery and flashed this kernel.
However, I have updated it, so try the new one in the OP, if you would. It also tests good here. When flashing, it gave me an error, but still flashes just fine. The error is about the syntax of the META-INF file, not a kernel problem.
Let me know how if you have any more problems. I did not have GAPPS installed when I tested this, just for reference.
Praise God, new kernel is up!
Hey guys, just wanted to let you know that the OP is updated with the new kernel, including intelliplug, an alternative to mpdecision for hotplugging. This controls how many cores are used at once. You have to use Kernel Adiutor or some similar app to control it. Intelliplug has several options that show up in the Kernel Adiutor as well. Let me know what you think!
hi there is a procedure to install this kernel on RR ( like wipe cache), because i tried an get a bootloop