Android version: 4.4.2
Baseband version: I317UCUCNJ1
Build number: KOT49H.I317UCUCNJ1
ROM is NE5 patched with the NJ1 OTA. Rooted, Deodex'd, and Zipaligned
Thanks and Credit to @Zen Arcade for his Auto-deodexer
Added Tethering patch, Screenshot edit, and Quad-MultiWindow
No N3, N4 or S5 stuff. No Theming. Not sure if I'll go there on this ROM.
ButtNaked I317UCUCNJ1
https://www.androidfilehost.com/?fid=95784891001615960
MD5: d969d68f31c7ddb0d4b45292ada4a7a3
Almost Naked ROM IS POSTED BELOW. It has the stuff removed from ButtNaked.
Like Books, Flipboard, Magazines, SVoice, etc. All ATT crap will be stripped out.
I'm still learning what the changes were on NJ1. The camera feels like it takes pictures faster, a little quicker to respond for the next pic.
INSTALLATION
Instructions are the same as any other Custom ROM.
If you are on stock kernel it will probably hang. It should not if you are on AGNi kernel.
Download for AGNi kernel
http://forum.xda-developers.com/devdb/project/?id=2368#downloads
PSN_AGNi_pureSTOCK-v4.2.8_N7105_4.4.x_AROMA.zip
IT IS NOT RECOMMENDED TO FLASH Version 4.3.0 YET ! So use the 4.2.8 listed above
Great information is located here. Section 7 is How To Guides and References
http://forum.xda-developers.com/showthread.php?t=1987541 Credit @Bajanman
Custom Recovery
TWRP (TeamWiinProjects)
http://techerrata.com/browse/twrp2/t0lteatt (Zip is flashable, Tar is ODIN)
PhilzRecovery
http://forum.xda-developers.com/showthread.php?t=2159652
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/ (Latest version looks like 6.48.6. I have 6.41.6 on my phone. I will test with that) Either one should work fine.
Install instructions: Credit: ATT DN5 Team @sawdoctor and @Bajanman
You need to have Samsung 4.3 Bootloader or newer.
Make sure you have the latest TWRP/CWM recovery installed.
Next, remember to backup your apps and your efs folder. That's something that you always should do before flashing anything.
Go to TWRP/CWM recovery via pressing home + power + volume up button at the same time.
Make a Nandroid backup of your working system, if you haven't done so.
Its best to do a clean install for any new Rom (clean installation recommended includes internal storage)
In TWRP Recovery hit wipe, and slide to factory data reset system. (Internal won't be touched fyi)
In PHILZ Recovery Format Internal SDCard (in mounts and storage) and do Factory reset (I will install a new ROM option in PhilZ)
(Reminder) Remember that everything you flash you do it at your own risk so do your research before flashing anything!!
Now find the location of the Rom on your external and install it.
Flashing the Rom zip.
It should take less than 10 minutes till it boots...
AlmostNaked I317UCUCNJ1
Android version: 4.4.2
Baseband version: I317UCUCNJ1
Build number: KOT49H.I317UCUCNJ1
ROM is NE5 patched with the NJ1 OTA. Rooted, Deodex'd, and Zipaligned
Thanks and Credit to @Zen Arcade for his Auto-deodexer
Added Tethering patch, Screenshot edit, and Quad-MultiWindow
No N3, N4 or S5 stuff. No Theming. Not sure if I'll go there on this ROM.
- SuperSu updated to 2.3.6 (After boot it will prompt to update binary, choose Normal not CWM) Credit: Chainfire
- AGNi kernel added V 4.2.8
- AGNi optimal settings added (I did back the Max CPU Freq back to stock 1600MHz)
* use AGNi control app to change other setings
- TW StereoSound & InCall Fix added
- Bootanimation.zip support (find a boot animation you like, drop it in /system/media change permissions to rw-r-r)
- Gmail 5.0 (15609867) Open it and it will require Google Play services to be updated.
- Google Calendar 5.0 (1579230) (under data/app) Can be removed
- Google Drive, Hangouts and Maps will need to be updated
- Everything else is current as of 11/28/2014
-- SVoice, Samsung Calendar, Google Books, Google Newstand, Flipboard and Group Play are not system apps so you can uninstall if you like.
But then you'd be ButtNaked......
AlmostNaked I317UCUCNJ1
https://www.androidfilehost.com/?fid=95832962473394667
MD5: cd3403d69995c9c4795307bfd8a6d3d9
See Post #4 for Small Update
INSTALLATION
Instructions are the same as any other Custom ROM.
Great information is located here. Section 7 is How To Guides and References
http://forum.xda-developers.com/showthread.php?t=1987541 Credit @Bajanman
Custom Recovery
TWRP (TeamWiinProjects)
http://techerrata.com/browse/twrp2/t0lteatt (Zip is flashable, Tar is ODIN)
PhilzRecovery
http://forum.xda-developers.com/showthread.php?t=2159652
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt/ (Latest version looks like 6.48.6. I have 6.41.6 on my phone. I will test with that) Either one should work fine.
Install instructions: Credit: ATT DN5 Team @sawdoctor and @Bajanman
You need to have Samsung 4.3 Bootloader or newer.
Make sure you have the latest TWRP/CWM recovery installed.
Next, remember to backup your apps and your efs folder. That's something that you always should do before flashing anything.
Go to TWRP/CWM recovery via pressing home + power + volume up button at the same time.
Make a Nandroid backup of your working system, if you haven't done so.
Its best to do a clean install for any new Rom (clean installation recommended includes internal storage)
In TWRP Recovery hit wipe, and slide to factory data reset system. (Internal won't be touched fyi)
In PHILZ Recovery Format Internal SDCard (in mounts and storage) and do Factory reset (I will install a new ROM option in PhilZ)
(Reminder) Remember that everything you flash you do it at your own risk so do your research before flashing anything!!
Now find the location of the Rom on your external and install it.
Flashing the Rom zip.
It should take less than 10 minutes till it boots...
MODz n ADDz
[MOD]AOSP/TW StereoSound & InCall Fix Note2 (TWRP/CWM flashable.zips) by @gregsarg
LINK http://forum.xda-developers.com/showpost.php?p=57026975&postcount=1
SHIFT Kernel 3.8.1 CREDIT: @rogersb11
[KERNEL][SHIFT][SINGLE/DUAL][TW/CM]11/29/14[LINARO]
Shift Dual Boot/ TW and CM Kernel
http://forum.xda-developers.com/galaxy-note-2/development-n7105/kernel-08-15-14-t2849082
This kernel supports both TouchWiz and ALL of AOSP other than maybe Pac Rom but it is not my fault it isn't supported lol. They use their own name in the framework instead of the one EVERYBODY else does.
CPU GOVERNORS: lazy, smartass, smartassV2, ondemand, powersave, interactive, performance, userspace, pegasusq, zzmoove
I/O GOVERNORS: deadline, cfq, row, sio
default cpu governor: ondemand
default I/O governor: cfq
CIFS & NFS Network FileSystems
F2FS/EXT4
kernel uses LZMA compression
OverClock to 2160
CPU Voltage Control
GPU OC, UC and Voltage Control
Boeffla Sound 1.6.6 (Use the control app from the play store)
Charge Control
TouchWake and Timeout support
Slide2Wake
DoubleTap2Wake
Mdnie HiJack
Dynamic Fsync Control
Kernel gesture support
Latest source updates
Compiled with Linaro GCC 4.9.2
STweaks is included for kernel configuration
https://www.androidfilehost.com/?fid=95784891001616471
AGNi Kernel
http://forum.xda-developers.com/devdb/project/?id=2368#downloads
Credit - psndna88
I'm running 4.2.8
PSN_AGNi_pureSTOCK-v4.2.8_N7105_4.4.x_AROMA.zip
https://www.androidfilehost.com/?fid=95784891001615962
Credit - psndna88
AGNi_settings_backup.zip (settings to try) Unzip copy to /system/etc/init.d
https://www.androidfilehost.com/?fid=95747613655042683
Credit - terpin32
Xposed Installer Credit : Author(s): rovo89, Tungstwenty
This is the installer for the Xposed framework, which is a requirement for all modules.
Xposed is a framework for modules that can change the behavior of the system and apps without touching any APKs. That's great because it means that modules can work for different versions and even ROMs without any changes (as long as the original code was not changed too much). It's also easy to undo. As all changes are done in the memory, you just need to deactivate the module and reboot to get your original system back. There are many other advantages, but here is just one more: Multiple modules can do changes to the same part of the system or app. With modified APKs, you to decide for one. No way to combine them, unless the author builds multiple APKs with different combinations.
http://repo.xposed.info/module/de.robv.android.xposed.installer
Xposed Module Repository
http://repo.xposed.info/module-overview
511 modules
ANIMATION TRANSITION:
Too add little more speed and smoothness on the transition you can change these settings.
- Go to System Settings then tap About Device.
- Touch Build Number until it says Developers Options Enabled
- Hit Back Button
-Select Developers Options, Scroll Down to
- Window animation scale 1x (default) change to Window animation scale .5x
- Transition animation scale 1x (default) change to Transition animation scale .5x
- Animator duration scale 1x (default) change to Animator duration scale .5x
ALMOSTNAKED FIXES <----------- Download
Thanks to @DoctorQMM for catching them (CSC, Multiwindow,Google Play) !
Tethering fix added also Thanks @kebran
Thanks my friend. ..g
black screen after flash. ill try flashing bn v1 then this. using twrp 2.8.0.0
update- flashing the ne5 buttnaked v1 rom first then dirty flashing ButtNaked I317UCUCNJ1 worked. test driving now. looks great awesome work
funtimez said:
black screen after flash. ill try flashing bn v1 then this. using twrp 2.8.0.0
update- flashing the ne5 buttnaked v1 rom first then dirty flashing ButtNaked I317UCUCNJ1 worked. test driving now. looks great awesome work
Click to expand...
Click to collapse
Thanks. It was late last night and was too tired to post instructions..
But I'm running TWRP 2.7.2.2, have been all through testing this week and it's worked also.
I do full wipe. (Dalvik Cache, Cache, System, Data, Internal Storage)
Boots up everytime.
@dicksteele
Thanx for yet another contribution to the noté2 community...:good:
Excellent work Mr steel..
You definitely need to use your skill to build aosp 5.0 if you can. Awesome work to keep this forum alive.
One Man Army !!!! Thank you for all you do sir.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Mentioned last night in PM but NICE work!!!
rob_z11 said:
You definitely need to use your skill to build aosp 5.0 if you can. Awesome work to keep this forum alive.
One Man Army !!!! Thank you for all you do sir.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
What the hell. Set up environment. REPO SYNC going now.
rogersb11 said:
Mentioned last night in PM but NICE work!!!
Click to expand...
Click to collapse
Mentioned?
Sent from my SAMSUNG-SGH-I317 using Tapatalk
---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------
dicksteele said:
What the hell. Set up environment. REPO SYNC going now.
Click to expand...
Click to collapse
Well look forward to try if you ever need anyone. Thanks again for efforts like you and Roger and others which are frequent.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
I'm excited about this build...and plan to heavily abuse it...lol
dicksteele said:
Thanks. It was late last night and was too tired to post instructions..
But I'm running TWRP 2.7.2.2, have been all through testing this week and it's worked also.
I do full wipe. (Dalvik Cache, Cache, System, Data, Internal Storage)
Boots up everytime.
Click to expand...
Click to collapse
funtimez said:
black screen after flash. ill try flashing bn v1 then this. using twrp 2.8.0.0
update- flashing the ne5 buttnaked v1 rom first then dirty flashing ButtNaked I317UCUCNJ1 worked. test driving now. looks great awesome work
Click to expand...
Click to collapse
So does this mean that you have to flash the ne1 ROM (buttnaked or full) before flashing this one? Also, how has agni kernel been behaving on 4.4 lately? I shied away from using it because of all the freezes and reboots awhile back. I'm using a 4.4 ROM whose kernel is stock based right now, but the network type within the APN keeps switching LTE off on me, and it's driving me nuts. I love it, but I also love your ROMS, I used your mk6 ROM for a very long time and always keep it in my back pocket. I might give this NJ1 build a shot, since it's an ATT base. Thanks in advance. ?
chris.l.naish said:
So does this mean that you have to flash the ne1 ROM (buttnaked or full) before flashing this one? Also, how has agni kernel been behaving on 4.4 lately? I shied away from using it because of all the freezes and reboots awhile back. I'm using a 4.4 ROM whose kernel is stock based right now, but the network type within the APN keeps switching LTE off on me, and it's driving me nuts. I love it, but I also love your ROMS, I used your mk6 ROM for a very long time and always keep it in my back pocket. I might give this NJ1 build a shot, since it's an ATT base. Thanks in advance. ?
Click to expand...
Click to collapse
I used the NE5 as base and patched the NJ1 OTA. So you can just flash it all by itself. It does not have the kernel, but it does have the NJ1 modem.
DoctorQMM has been chatting with Bajanman and he suggested do not go over 4.2.8 kernel.Doc has been running it for a few days and it's doing fine on his phone. But you know, every phone acts different.
I've been running 4.2.5 since it came out. I just loaded 4.2.8 last night. It's running good. I may add it to an update, only thing I see right now is removing a couple of Knox files I missed.
I'm messing with the AOSP 5.0, should be done with the Almost Naked today or tomorrow. Thought I was done last night until I flashed it.
I lost track of my builds ober the last week and the build I'm messing with had the newer Play services and store.
It was a train wreck when I tried to get into Play sotre.. Updates worked fine and it's running now, but it's half assed if I release it like it is.
I dirty flashed this over the ne5 buttnaked v1 I had installed, and it works flawlessly. I had some crashes on the ne5, but none so far on this rom. Thanks Dev...because of you guys, I don't have a need update my Note 2. Much appreciated.
RuKuS4Life said:
I dirty flashed this over the ne5 buttnaked v1 I had installed, and it works flawlessly. I had some crashes on the ne5, but none so far on this rom. Thanks Dev...because of you guys, I don't have a need update my Note 2. Much appreciated.
Click to expand...
Click to collapse
No worries. Glad it worked.
Just out of curiosity, I did a clean install of this rom, but got the black screen as well. I had to dirty flash over the n5 butnaked rom. Not sure why this is, but thought I should mention it as well.
RuKuS4Life said:
Just out of curiosity, I did a clean install of this rom, but got the black screen as well. I had to dirty flash over the n5 butnaked rom. Not sure why this is, but thought I should mention it as well.
Click to expand...
Click to collapse
Did you install anything between the flashes? The only difference really is the NJ1 Buttnaked does not have a kernel and the NE5 does.
chris.l.naish said:
So does this mean that you have to flash the ne1 ROM (buttnaked or full) before flashing this one? Also, how has agni kernel been behaving on 4.4 lately? I shied away from using it because of all the freezes and reboots awhile back. I'm using a 4.4 ROM whose kernel is stock based right now, but the network type within the APN keeps switching LTE off on me, and it's driving me nuts. I love it, but I also love your ROMS, I used your mk6 ROM for a very long time and always keep it in my back pocket. I might give this NJ1 build a shot, since it's an ATT base. Thanks in advance. ?
Click to expand...
Click to collapse
Use my 3.8.1 kernel. Super solid and stweaks is packed. Just fixed a boot issue with TW as it's dual boot but I've been running it on my Saber rom and it's been flawless. No SOD or RR. Kernel has updated LTE modem firmware too. Gave me an extra bar at home where I consistently had been getting only one. Make sure to get build 3.8.1 from AFH and not 3.8 on xda. I haven't been able to upload to xda for 3 days
Sent from my SGH-I317 using XDA Premium 4 mobile app
Related
Want to say thanks for the ROM? or just share some love? into dance music?
Then head on over to my youtube page @ https://www.youtube.com/user/TheDJohnnyBlaze
Subscriptions are greatly appreciated! Cheers!
[INSPIRATION FOR THIS MOD CAME FROM uoY_redruM AND HIS FREEGS3 R7.1.1 "Resurrection" ROM]
This is a small modification to the new MVLDLK4 ROM. It is intended to be clean and minimalistic while still giving the stock JB touchwiz speed, stability and functionality.
Based on the I747MVLDLK4 JellyBean 4.1.1 ROM
Designed for: MVLDLK4 (Bell,Rogers,Telus,Sasktel) *Might work with other carries. Just change modem and APN settings*
** Reported working for ATT. Just flash the newest modem after ROM install and change APN settings within the ROM.
** Modems can be found here: http://forum.xda-developers.com/showthread.php?t=1831898 **
** APN Settings can be found here: http://forum.xda-developers.com/showthread.php?t=1434995 **
◄DEVICE►
Samsung Galaxy S3 (SGH-I747M)
◄NAME►
I747MVLDLK4_DJJOHNNYBLAZE_MODV1
◄FEATURES►
Fully Deodex'ed entire ROM (Frameworks/Apps)
Zipalign optimization for all apps
Added Root/SU
Added Bash
Added BusyBox
Full /etc/init.d support
Full /data/app Support
Disabled bootup/shutdown sound
USB Debugging enabled by default
Voicemail Notifications work, LTE works, Great modem speeds (WIFI/MDATA), Quick ROM
◄EXTRAS►
Includes Adobe Flash 11
Includes 4.1.2 Gapps
4-Way reboot mod (hotboot,reboot,recovery,download)
Removed all Bloatware
Added Acid Audio Engin MOD 5.0 (http://forum.xda-developers.com/showthread.php?t=2002197)
Added Latest Ktoonz Kernel (http://forum.xda-developers.com/showthread.php?t=1756776)
Added JellyBean4.2 Keyboard (Find in language and input settings, ANDROID KEYBOARD)
Added David Dee's JB Theme Mod (AT&T Version - Blue Theme, 15 Toggle Mod, including 1% Circle Battery Mod) (http://forum.xda-developers.com/showthread.php?t=1895880)
◄DOWNLOAD► (MIRRORS WILL BE UP TOMORROW, SORRY FOR THE INCONVENIENCE)
V1 (With KTKERNEL):
http://www.djjohnnyblaze.com/GS3MOD/I747MVLDLK4_DJJOHNNYBLAZE_MODV1-KTKERNEL.zip
V1 (With STOCK KERNEL):
http://www.djjohnnyblaze.com/GS3MOD/I747MVLDLK4_DJJOHNNYBLAZE_MODV1-STOCKKERNEL.zip
http://ultimatum.us/I747MVLDLK4_DJJOHNNYBLAZE_MODV1-STOCKKERNEL.zip (thanks to vlara)
http://www.4shared.com/zip/AFbLSs08/I747MVLDLK4_DJJOHNNYBLAZE_MODV.html (thanks to bori1030)
https://docs.google.com/open?id=0B1nskCTDXg96enVkWXNTQ1d0X3c (Thanks to Nucleartx)
◄INSTRUCTIONS►
1.Put ROM on sdcard
2.Boot into TWRP or CWM Recovery
3.Make nandroid backup
4.Factory reset, Wipe Cache, Wipe Dalvik Cache, **Recomend Wiping System as well**
5.Install ROM
6.Reboot
7.Wait
8.Enjoy!
(If problems occur with mobile data or LTE speeds, try flashing a different modem from the links above and make sure your APN settings in the ROM are correct for your carrier as well (Settings can be found in the links above)
◄FAQ/TIPS/FIXES►
[Google Play Store Fix] Thanks to dawen
If you encounter an error while downloading apps from the google play store follow these instructions:
1. Remove google account from phone by going to settings ---> click google account ---> remove account.
2. Go to settings --> Application Manager --> click Google Play Store --> clear cache / clear data
3. Reboot
[ATT USERS] Thanks to Jbluedodge
To make this work with ATT, simply download your newest modem from the links above and flash the modem AFTER flashing the ROM. In the ROM settings edit your APN setting to match ATT. Everything should work!
[STOCK TOUCHWIZ THEME] Thanks to David Dee
Stock green theme. Supports 15 toggles. clear cache/dalvik, flash zip: http://www.mediafire.com/?kj43kd8x6ajv5py
◄THANKSTO►
uoY_redruM: for his work on the FreeGS3 ROM which gave me the inspiration to do this with the new MVLDLK4 ROM.
r-ikfoot: for the great work done on the Acid Audio Mod.
ktoonsez: for his amazing kernel and hard work.
David Dee: for his Jelly Bean TouchWiz Mods.
Very nice!
I'll give it a whirl
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
+1:thumbup:Woot Woot!!!!
White Hot! GS3.
Trying this now. Thank you.
Sent from my SGH-I747 using Tapatalk 2
Looks tempting! Just curious, any chance of getting a version with stock kernel?
Is this based off ATT or Rogers?
shugga101 said:
Is this based off ATT or Rogers?
Click to expand...
Click to collapse
Based on the I747MVLDLK4 JellyBean 4.1.1 ROM
thats based on Rogers
cdjaney said:
Looks tempting! Just curious, any chance of getting a version with stock kernel?
Click to expand...
Click to collapse
on the way.
dawen said:
Based on the I747MVLDLK4 JellyBean 4.1.1 ROM
thats based on Rogers
Click to expand...
Click to collapse
ok thanks, so djjohnnyblaze is there any way to get a version based on the ATT I747UCDLK3?
Or do all I have to do is flash then then flash the ATT modem?
shugga101 said:
ok thanks, so djjohnnyblaze is there any way to get a version based on the ATT I747UCDLK3?
Or do all I have to do is flash then then flash the ATT modem?
Click to expand...
Click to collapse
I will not be making a version for I747UCDLK3. However if you do a full nandroid backup, testing this ROM on ATT should be no problem. If problems arise with data or LTE, try your original ROMS modem file from the thread and try changing the APN settings. Other than that, I dont think there should be any problems.
djjohnnyblaze said:
I will not be making a version for I747UCDLK3. However if you do a full nandroid backup, testing this ROM on ATT should be no problem. If problems arise with data or LTE, try your original ROMS modem file from the thread and try changing the APN settings. Other than that, I dont think there should be any problems.
Click to expand...
Click to collapse
thanks for the quick reply.
djjohnnyblaze said:
on the way.
Click to expand...
Click to collapse
Also waiting for Stock Kernel...
How is MMS with this? I'm waiting for this to download and can't wait to flash! Thanks!!
sent from my pre-s4!
Is there any benefit of using the ROM with KTKERNEL?
CyCLoBoT said:
Is there any benefit of using the ROM with KTKERNEL?
Click to expand...
Click to collapse
Features from his thread:
•Linux kernel 3.0.51
•Samsung open source
•Optimized kernel configuration
•Updated USB driver
•Updated wifi driver
•custom bootanimation
•unsecure root adb
•init.d support
•Governors (MSM-DCVS, ABYSSPLUG, BADASS, SUPERBAD,LAGFREE, SLEEPY, SCARY, SMARTASSV2, WHEATLEY, LAZY, ADAPTIVE, INTERACTIVE, PEGASUSQ, LULZACTIVE, KTOONSERVATIVE, CONSERVATIVE, ONDEMAND, USERSPACE, PERFORMANCE)
•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE)
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2106mhz)
•Fastcharging for USB/Car Charger (you must be unplugged before turn fast charge on or off, also Fast Charge DISABLES USB connection to your PC)
•KTweaker app for kernel control
•KTweaker Widget
anyone else having problem download anything from play store? i get an error, "could not be downloaded due to error. (Error retrieving infromation from server. [RPC:S-5:AEC-0]
tried clear data and cache in play store app no luck
update: got the play store to work by removing the google account and clear data/cache on play store app then reboot
dawen said:
anyone else having problem download anything from play store? i get an error, "could not be downloaded due to error. (Error retrieving infromation from server. [RPC:S-5:AEC-0]
tried clear data and cache in play store app no luck
Click to expand...
Click to collapse
I'm not having an issues with Play Store. I just finished updating apps from it.
Take a while to download can't wait
Sent from my SAMSUNG-SGH-I747 using xda premium
22kb dl 8hrs ..lol hit me Blaze I can put a mirror for you!
I finally got it downloaded. Good Rom. For those on at&t, this works on at&t. Just download the new modem and install while your flashing the Rom. Edit the apn and edit the build prop.
Sent from my SGH-I747 using xda premium
bruce2728-d80220f Stripped stock ROM
With my optimized stock kernel
Features
Fast, smooth and stable stock experiance
Odexed
Zipaligned
Rooted
Busybox
init.d support
Knock-code
De-bloated
Removed all play store available apps and a lot of LG apps
Replaced stock file manager with ES File Explorer
DSP Manager for enhanced audio effects and EQ
My optimized stock kernel
4k video recording - xdabbeb 3.1.0
Slow motion video recording - xdabbeb 3.1.0
Flex home theme - optional
Flex weather theme - optional
Kernel
This ROM comes with my optimized stock kernel which can be found in this thread.
Kernel features include:
Compiled with linaro 4.8 using -o3 compiler flags
Optimized for speed and battery life
SCHEDULER: Autogroup patch
lib/memcopy: use glibc version
lib/string: use glibc version
Optimized ARM RWSEM algorithm
vfp - compile with neon
vfp: hardfloat
Removed a lot of debugging, stats, logs and tests
Updated kgsl from CAF
For a full list of changes check the commit log on my github
Download
AndroidFileHost
md5 5895d5f7af31c37430d138a08379bca6
The download size is still 1.5 gigabye as i prefer to use a system image for a cleaner flash
and so I can setup symlinks and permissions before packag the zip.
Install
Reboot to recovery
Wipe data, cache and dalvik (system is wiped during install)
Install zip
No need to install SuperSU, it's already rooted.
Changelog
V2
Fixed flac playback with DSP Manager
V3
Added Flex home theme
Added Flex weather theme
Added back sim tool kit
Updated to my latest kernel
Removed preload symlinks
Fixed some permissions that could have potentially stopped BT working correctly.
V3.1
Removed icon boarders in fles theme - used icons from cloudyfa's mod to patch theme apk
Synced kernel sound driver with stock - trying to fix in car bt audio, normal bt audo is fine
Added Flex addon to first post - contains flex theme and some flex apps
V4.0
Rebased on D80220f_00
Kernel updated to v0.2
Add-ons
Stock kernel - Download - md5: 61dfab7e2e0983bc8a68399ca983f37b
Stock camera - Download - md5: f6df6af7f5f7be45d8fa751bc796d6ee
My kernel - Download - md5: f8e311de1b0b06ead79a476e7d1ee5b1
Flex theme and apps - Download - md5: 69dea2017fedc02eb699572f0a53a643
Thanks
xdabbeb - for his camera mod
Cloudyfa and bender_007 - for AutoRec
Donations
Donations are always wlcome and appreciated but in no way required.
If you would like to donate please follow this link.
Thank you.
XDA:DevDB Information
bruce2728 D80220F, ROM for the LG G2
Contributors
bruce2728
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom recovery, latest kitkat firmware
Based On: Stock
Version Information
Status: Stable
Current Stable Version: v4.0
Stable Release Date: 2014-07-01
Current Beta Version: v1
Beta Release Date: 2014-05-04
Created 2014-05-12
Last Updated 2014-07-01
Reserved
For those interested in benchmarks, here are some scores i achieved using this ROM.
I have been running the v1 very nicely. The only error has been the Bluetooth audio with my car system. There was no audio. I moved to another kernel and it was resolved, but your kernel was faster. Would you mind adding the pateched stock 20d kernel in a flashable zip so we have stock as a backup alternative? Thanks for your work.
albsat said:
I have been running the v1 very nicely. The only error has been the Bluetooth audio with my car system. There was no audio. I moved to another kernel and it was resolved, but your kernel was faster. Would you mind adding the pateched stock 20d kernel in a flashable zip so we have stock as a backup alternative? Thanks for your work.
Click to expand...
Click to collapse
Yes i can do that but it may work in v2, give it a try and let me know please.
It will be up in about 40mins, I have a really slow upload speed.
If any of you are good with graphics, feel free to send me some banners and title headers for the first post.
If I use yours you will get a mention in the first post.
Thanks.
Great!! Will try it when i get home from school!:good:
Edit: Downloading....
Edit 2: Dowload keeps failing after 7% ...think you should get another upload another site...
V2 upload complete...
@bruce2728, thanks for your work!
I've been using v1 of this ROM in the last few days: very clean and smooth so far, will follow this thread.
Cheers!
Where is the flashing manual ?
@zhuchella, what do you mean?
This ROM must be flashed the same way of others: reboot your phone in recovery, wipe System, Data, Cache; flash the ROM's ZIP and SuperSU v.1.94; reboot to system.
Downloading keeps failing on v2....
---------- Post added at 02:38 PM ---------- Previous post was at 02:38 PM ----------
Downloading keeps failing...
Giocarro said:
@zhuchella, what do you mean?
This ROM must be flashed the same way of others: reboot your phone in recovery, wipe System, Data, Cache; flash the ROM's ZIP and SuperSU v.1.94; reboot to system.
Click to expand...
Click to collapse
Correct, but no need to flash SuperSU, the ROM is rooted already.
Norside said:
Downloading keeps failing on v2....
---------- Post added at 02:38 PM ---------- Previous post was at 02:38 PM ----------
Downloading keeps failing...
Click to expand...
Click to collapse
I'm in the process of getting another host for now though I'll post a temporary mirror.
It will take a while to upload, my connection is not the best.
bruce2728 said:
I'm in the process of getting another host for now though I'll post a temporary mirror.
It will take a while to upload, my connection is not the best.
Click to expand...
Click to collapse
Thanks Bruce, v1 seems to work though, will try that one first
Edit none worked will wait for new download
Running v1 for some days now, impressive balance between speed and battery-consumtion. How already mentioned, for my needs the perfect rom+kernel combo with Xposed and xdabbebs camera mod...thanx!!!
I score bellow averge
bruce2728 said:
For those interested in benchmarks, here are some scores i achieved using this ROM.
Click to expand...
Click to collapse
Dear Bruce, I've just installed you ROM (V1), and mi Antutu score is 31549 (nothing touched). I tell you this because you posted your score.
Am I doing something wrong?
By the way, I have an International D802.
Thank you very much in advance! :good:
the problem is a different MD5 goo_im V2
nostromo76 said:
Dear Bruce, I've just installed you ROM (V1), and mi Antutu score is 31549 (nothing touched). I tell you this because you posted your score.
Am I doing something wrong?
By the way, I have an International D802.
Thank you very much in advance! :good:
Click to expand...
Click to collapse
You didn't do anything wrong.
Even if the same device with the same rom, benchmark still can be different due to many reasons, such as temperature, what apps you've installed, or the minor differences among each devices.
yuyuchen0204 said:
You didn't do anything wrong.
Even if the same device with the same rom, benchmark still can be different due to many reasons, such as temperature, what apps you've installed, or the minor differences among each devices.
Click to expand...
Click to collapse
Ok, thank you for your answer, I know those things and I know benchmarks should not be trusted :silly:
By the way, I'm very happy whit this ROM, I'll report back my experiences. :highfive:
stöbener said:
Running v1 for some days now, impressive balance between speed and battery-consumtion. How already mentioned, for my needs the perfect rom+kernel combo with Xposed and xdabbebs camera mod...thanx!!!
Click to expand...
Click to collapse
It has the camera mod already.
One of the things I need to put in the thanks section.
Shift Lollipop Kernel
This kernel supports only Lollipop AOSP. Should support all roms but not sure about Slim, if it doesn't work for a ROM please upload the boot.img from the ROM and post it here and I will see about adding support. Basically this kernel was developed only for CyanideL ROM but has progressed into a decent standalone kernel from reports as I do not own this device, so I thought I would just go ahead and share it so it was known and people could use it for other Lollipop Roms since I keep the source updated for the ROM I figured a kernel with some features and up to date source would be worth posting. Hopefully you all enjoy it
CPU GOVERNORS: smartass, smartassV2, ondemand, powersave, interactiveX, performance, userspace, zzmoove, wheatley and nightmare
I/O GOVERNORS: noop, deadline, cfq, row, sio
default cpu governor: InteractiveX
default I/O governor: row
F2FS/EXT4
OverClock to 1881
CPU Voltage Control
GPU Step Control
Advanced TCP Controls
Faux Sound Mod
Quick Charge
Compiled with Linaro GCC 4.9.1
Install Instructions: Standard flash in recovery, wiping caches in recommended but usual shouldn't be required
Current version is 3.0
Downloads: Shift Kernel
Thank you and enjoy!!
If you like our work, then maybe you would like to give a small donation or buy me a beer. You know you want to lol :victory:
Donate to @rogersb11
Thank you and ENJOY!!!!!
XDA:DevDB Information
Shift Kernel, Kernel for the AT&T Samsung Galaxy S III
Contributors
rogersb11
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.0
Stable Release Date: 2015-02-19
Created 2015-02-20
Last Updated 2015-02-19
Nice work here man ?
GS3-T999L : SOKP-MS-04-KK444
Hey rogersb11. I just installed on my sgh-i747m. Running an alpha self built pacman ROM. I will test it out today and report back results. Thanks for all your contributions in the Dev world. Cheers!!!!
Sent from my SAMSUNG-SGH-I747 using Xparent Cyan Tapatalk 2
exfat?
Thanks! This kernel has been working great on Cyanide L.
Quick question, does it have exfat support built in?
This kernel is working great on Oct-L
jason2678 said:
Thanks! This kernel has been working great on Cyanide L.
Quick question, does it have exfat support built in?
Click to expand...
Click to collapse
Top of my head I'm not sure and I'm not by my build machine to check the source. If it's not I can look into adding it tho. I have it in my they kernel source so I'm sure I can port it over
Thanks. I have a microsd that may be of dubious quality. It works best as exfat. I've found I have to be really cautious with it. I'm pretty sure I didn't try it with cyanide.
Doesn't seem to support exfat, but it's nice and smooth on the official Slim weekly.
Loving your kernel, hey I am wondering about f2fs, is it new? I tried formating my system and data to f2fs flashed shift v2.2 and didn't boot I tried this on cyanide L and I am a currently on it (ext4), if there are different steps I need to take please let me know other wise I am loving v3!!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Johnnyy9262 said:
Loving your kernel, hey I am wondering about f2fs, is it new? I tried formating my system and data to f2fs flashed shift v2.2 and didn't boot I tried this on cyanide L and I am a currently on it (ext4), if there are different steps I need to take please let me know other wise I am loving v3!!!
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
You need the kernel changer from the f2fs thread to allow ROM to boot
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Would this work for d2tmo?
gvsukids said:
You need the kernel changer from the f2fs thread to allow ROM to boot
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Link me? It would be amazing if actually get f2fs working in lollipop [emoji1]
Sent from my SAMSUNG-SGH-I747 using Tapatalk
roogerrisboredd said:
Would this work for d2tmo?
Click to expand...
Click to collapse
Yes it SHOULD. Comes with cyanide ROM and it's for tmobile as well
gvsukids said:
You need the kernel changer from the f2fs thread to allow ROM to boot
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
F2fs ramdisk support was added in 3.0. I only added it for data and cache tho and that's where the improvements are to be had
Shift 3.0 bootloops on CyanideL
I've been running CyanideL with the Shift kernel for a couple of months with no problems. The latest version (20150220) bootloops on me, though. I tried a dirty flash, then factory reset but either way it shows the Samsung flash screen, buzzes and then back. I tried flashing Shift 3.0 separately after this happened, as suggested by @TheGeekyNimrod, but that produced the same result. But then I flashed Shift 2.2 D2 over CyanideL-20150220, and now it's booting fine.
I tried to take a logcat while it was booting with adb logcat>logfile but I got the message -waiting for device- and nothing more. The logifle was empty. Is there another way to take a boottime logcat? My recovery is TWRP 2.8.4.0.
Thanks, @rogersb11, for all your work on this.
pixbuf said:
I've been running CyanideL with the Shift kernel for a couple of months with no problems. The latest version (20150220) bootloops on me, though. I tried a dirty flash, then factory reset but either way it shows the Samsung flash screen, buzzes and then back. I tried flashing Shift 3.0 separately after this happened, as suggested by @TheGeekyNimrod, but that produced the same result. But then I flashed Shift 2.2 D2 over CyanideL-20150220, and now it's booting fine.
I tried to take a logcat while it was booting with adb logcat>logfile but I got the message -waiting for device- and nothing more. The logifle was empty. Is there another way to take a boottime logcat? My recovery is TWRP 2.8.4.0.
Thanks, @rogersb11, for all your work on this.
Click to expand...
Click to collapse
Yea this seems to be a very random issue. Geeky himself has this on a previous kernel I gave him. After failed boot you can boot straight to recovery and pull the last_kmsg. I can't remember exactly the command but a quick search will tell you. That's the kernel log
3.0 running great on Oct-L. Awesome work!
rogersb11 said:
Yea this seems to be a very random issue. Geeky himself has this on a previous kernel I gave him. After failed boot you can boot straight to recovery and pull the last_kmsg. I can't remember exactly the command but a quick search will tell you. That's the kernel log
Click to expand...
Click to collapse
I tried this but there was no last_kmsg. I did get one from a successful boot with the 2.2-D2 kernel; that one said "no errors" at the bottom. But I guess it doesn't get far enough to even create the kmsg file with the 3.0 kernel. The last time I tried it stayed on the Samsung flash screen with the LED pulsing blue for about 10 minutes before I pulled the battery.
pixbuf said:
I tried this but there was no last_kmsg. I did get one from a successful boot with the 2.2-D2 kernel; that one said "no errors" at the bottom. But I guess it doesn't get far enough to even create the kmsg file with the 3.0 kernel. The last time I tried it stayed on the Samsung flash screen with the LED pulsing blue for about 10 minutes before I pulled the battery.
Click to expand...
Click to collapse
If it stays on the Samsung screen very long at all then it's just not gonna boot. Well that's unfortunate man, 3.0 is a massive improvement. Not sure how to help you since almost all haven't had this issue. Maybe next build will work for you. Not sure what else I will add but I'm sure I'll find something. Anybody have any requests?
rogersb11 said:
If it stays on the Samsung screen very long at all then it's just not gonna boot. Well that's unfortunate man, 3.0 is a massive improvement. Not sure how to help you since almost all haven't had this issue. Maybe next build will work for you. Not sure what else I will add but I'm sure I'll find something. Anybody have any requests?
Click to expand...
Click to collapse
You're awesome, I know I'll be happy when a new build comes out that works. Fiops please, and I don't know if f2fs support for sdcard would work but that seems like the best file format for an sdcard to me. :good:
JDC2389 said:
You're awesome, I know I'll be happy when a new build comes out that works. Fiops please, and I don't know if f2fs support for sdcard would work but that seems like the best file format for an sdcard to me. :good:
Click to expand...
Click to collapse
I'll look into fiops. F2fs should work on an sdcard. Kernel supports f2fs cache and data so internal and external should work that way
Cool stuff, I flashed the newest twrp recovery and latest modem/baseband NJ1 using Exodus rom from team Vanir http://www.vanir-exodus.net/exodus/d2att/ shift kernel 2.2 works sortof, zzmoove hardlocks the phone and xposed alpha won't work[works on exo kernel]. 3.0 is broken for me still on a clean flash the splash loads this time then after a bit the screen goes black, oddly enough touching the power button causes a vibrate but other then that phone won't wake. Phone is unresponsive from pc side using adb logcat etc when on 3.0 so I don't know how I would report any bugs.
**************************************************
[ROM] 6045Y-DCZ
current version 2.2 (2016-08-09)
STOCK, STABLE, FAST, ROOT
**************************************************
FOR NOW IT IS ONLY FOR SINGLE SIM DEVICES!! DUAL SIM NOT WORKING
-it is not exactly a build. Its more a mod.
-based on latest Alcatel IDO 3 5.5 6045Y MMB29M EUROPE UPDATE
-including ROOT (latest supersu 2.76)
-removed all unnecessary apps from Alcatel. there is only the necessary basic to run the phone. All other things you can download by yourself.
-Due to source is the avaliable set of languages shrinken to English, German, Slovak and Czech. But More Locale 2 app (included) will do the trick for you on most apps.
GUIDE:
-Its always better to flash this upon a stock firmware. You can try to flash it upon custm roms like CM AOKP etc, but since i havent tested it, i dont know if it will 100% work
-download firmware and also the MD5 checksum and copy both files to your phone.
-go to TWRP recovery (please make sure you use the @Unjustified Dev version from here
-make backup of your current ROM
-here you can grab a bat file to make backup of your curent MODEM, or download your MODEM in a zip file. Don´t forget to thank @famewolf for the time he spends to gather the modems.
-If you hav ebackup of oyur curent modem, just open my ROM zip in a ZIP app (i use 7zip). Replace the non-hlos.bin with your non-hlos.bin (modem) file.
-copy the ROM (and if you choose the modem zip file from @famewolf )
-wipe chache/dalvik/system/data
-format data (just to be sure. Format data is something diferent than wipe data)
-install ROM (make sure you have MD5 check enabled and it gives no error)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk
ISSUES:
-on my 6045Y i have no issues so please report
changelog in 2.2 build (2016-08-09)
-parallax background on stock launcher (looks great)
-translucent appdrawer background
-cleared updater-script of useless lines
changelog in 2.1 build (2016-08-08)
-build from latest 6045Y 010 06 update (6045Y MMB29M EUROPE UPDATE)
-no need to do some silly unmount and mount crap, because i know how to write the updater-script
-Root (systemless) included, GAPPS included (as this is just a moded stock ROM)
-Debloated 6.0.1 version..lockscreen is working well for my on 6045Y
-Background wallpaper from Vikas Kanwal (no stealing from web)
-Included 6045Y modem, so if you are on non 6045Y version see above to get your corespondent modem zip fle or image file before you start flashing.
-Security patch for 6.0.1 (from 2016-1-7)
-Double tap on lock screen to sleep
-Launcher 5x6 and dock 5x grid (instead of 4x5)
-lcd density set to 430
-USB debuging enabled from first boot
-Color temperature setting
-Technicolor enhanced colors
-Call recorder - when you are in a call you can tap on the three dots on the right and record the call
-Multi window enabled (under sttings/developer option)
-Glove mode (higher sensitivity of touchscreen)
-Three fingers swipe to make screenshot
CREDITS:
@Unjustified Dev , @famewolf , @The Marionette, without them there will be no IDOL 3 5.5 develpment, so pelase give them a thnax!
And of course i am not responsible for any damage you do by flashing this on your device!
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
famewolf said:
Nice work! Does your version allow wifi to be enabled while in airplane mode? Are you changing the model to something unique like x806 to prevent updates from trying to be downloaded/installed that could affect partitions beyond system/boot? Did you remove the system update checker? Have you modified or eliminated the default updater-script in the stock i806 rom which clobbers several partitions beyond system and boot?
Click to expand...
Click to collapse
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
DallasCZ said:
-yes wifi can be turned on while in airplane mode
-i deleted update checker app, so there are no updates
-yes i deleted all entries that were messing around with radio etc.. So now this script only format and copy system, busybox, root, kernel thats all. So it should be also suitable for 6045I version. I can enable the double sim stuff in build.prop so this should work also for 6045K version.
Click to expand...
Click to collapse
Sounds like you have all the bases covered! What a shame we can't get multirom to work on our device YET....it would allow us to use our external sd to swap between multiple roms and I could have cm12.1, yours and whatever new one I'm testing all going at the same time. Multirom also has it's own custom build of twrp that supports the roms.
i know i have used MULTIROM on my older devices...
DallasCZ said:
i know i have used MULTIROM on my older devices...
Click to expand...
Click to collapse
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
famewolf said:
You may want to look back to your source and see if they do an unmount of /persist at the end. You have left in the code which format's it and extracts the wifi drivers then symlinks them but I didn't see an unmount so it may have gotten accidentally deleted. It may be unnecessary but normally for every mount you have an unmount as it can leave partitions mounted in twrp that could cause issues if the user installs packages after the current one.
Click to expand...
Click to collapse
My fault i wrote twice unmount system.... hmm thats when you make such things at 2:00 AM
thanx bro.
DallasCZ said:
**************************************************
[ROM] 6045-i806-DCZ
current version 1.0
STOCK, STABLE, FAST, ROOT
**************************************************
-it is not exactly a build. Its more a mod.
-based on latest TCL i806 (IDOL3) firmware (JSU_I806-2[ABC]LCCN7_7TMBRCB3)
-I exchanged the kernel for the ARDE DEV TEAM STOCK OC one (4x1651 MHz + 4x1601 MHz).
-Antutu player will love the 37K ratings (all cores set to performance Governors)
-including ROOT (latest supersu 2.52)
-added KERNEL ADIUTOR
-removed all unnecessary apps from TCL. there is only the necessary basic to run the phone. All other things you can download by yourself. So the ROM is only 600 MB on size.
-Due to source is the avaliable set of languages shrinken to English and Chineese. But More Locale 2 app (you can download form google play) will do the trick for you on most apps.
GUIDE:
-go to TWRP recovery
-wipe chache/dalvik/system/data
-install ROM
-install GAPPS (i use open gapps 5.0 nano)
-reboot
-on first boot be patient it takes a while after the first boot (about 5 minutes) untill the ROM settles down
DOWNLOAD:
From my google disk (size aprox 600 MB)
ISSUES:
I dont know of any, you tell me.
FUTURE PLANS:
-merge another languages from framework res, settings, systemUI apks . As i am not a DEV i will repack the apks adding these languages it should work with more locale 2 then. I cannot add the language support to the rom itself.
-replace the i806 launcher with one from 6045Y (will do need more tests because of lags of the 6045Y launcher).
-add some minor build.prop tweaks
CREDITS:
BIG thnax to @franq36 of ARDE DEV Team for the Kernel, also thank @Grarak for the Kernel Adiutor.
Click to expand...
Click to collapse
I participate in the development but the creator of the kernel is @acura2201 should also include in the credits, also a link to the original kernel thread in HTCMania
thx,good job
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
The Marionette said:
Does this ROM support all the variants?
Sent from my 6045X using XDA Forums Pro.
Click to expand...
Click to collapse
As it does not rewrites original recovery neither radio files it should be good to all variants, but I have not tested (only on my 6045Y).
the second thing is the OC kernel from HTCMANIA.com if it will be working on 6045I,6045O nad 6045K variants.
If someone with dual sim (K version) would try it and has no dual sim options there have to be a slightly build.prop modification. Just change line "persist.radio.multisim.config=single" to "persist.radio.multisim.config=dsds".
someone should try...If he made a full TWRP backup, there is nothing to worry about (i think)
famewolf said:
Hmm I guess I should also confirm for the 6045i users that you are using the "group 2" kernel? If not, 6045i users will need to flash the group 2 kernel right after flashing the rom before they reboot..not a big deal but if necessary a link to it in post #1 might help. Looking forward to trying this one since the i806 rom had such better performance for the idol3 than the default roms.
Click to expand...
Click to collapse
You re right as always i mentioned it on 1st post.
DallasCZ said:
Suprisingly no. I used the group1 OC kernel and i am running on it since yesterday and no hicups,lags or reboots.
Click to expand...
Click to collapse
*removed half asleep post since you had already added link to post #1*
I'm surprised the chinese rom had higher antutu scores than cyanogenmod but I'm looking forward to having a rom that flips "upside down" properly.
Edit: Disregard what I said below, I just looked at the page again without it being translated and found the link, I think. Wow, translators really make a mess of a page. Is this the correct file/img...."Nuevoboot_Alcatel_V1.img"?
I'd like to try this but the link to HTC Mania translates horribly, it's a absolute mess. I cannot find the download link for the Group 2 OC Kernel (6045i) anywhere on that page. Can direct links be posted?
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomocí Tapatalk
DallasCZ said:
anyone with other model than 6045Y should download the Nuevoboot_Alcatel_V1.img as I understood.
Odesláno z mého 6045Y pomoc�* Tapatalk
Click to expand...
Click to collapse
Well, I have tried that one as well, and it doesn't boot. So I guess its for stock ROM? Haha.
Disregard previous information, apparently the kernel in the thread changed somewhat since the last time I downloaded it. Testing again, boots up with the group 2, will report back.
capeorigins said:
Hmm, so I have cm12.1 11/23 running, and its rebooting alot more than it was yesterday Lol. I am running the group 1 oc. Is that the right one? I think it is, so hmm. Is it worth switching back to stock?
Click to expand...
Click to collapse
You should talk about cm in the cm thread..thats what it's for. Group 1 and group 2 is only for "stock" roms. the i806 falls under "stock rom". Roms like cyanogenmod should be running the CM kernel on that page. It's part of the name and not either of the groups.
---------- Post added at 09:39 PM ---------- Previous post was at 09:34 PM ----------
@DallasCZ
What min/max/governor are you choosing for big & little in KA?
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
xStealth said:
Ok... so:
6045i
- Full Wipe
- Installed without kernel, then hit reboot
- Rebooted straight to TWRP, said OS not installed. Installed over it, rebooted.
- Booted up, went through settings, then froze when Supersu free dialog box popped up
- Installed Nuevoboot_Alcatel_V1, and open_gapps-arm64-5.0-micro-20151124
- Booted up fine, no play service issues of any kind
- Ran AnTuTu 64-bit with big/little on performance (1651 and 1113), score 33,625
Can't fathom why the 6045Y would score almost 3,500 more on AnTuTu. Made sure there was no thermal throttling by placing phone in front of air conditioner.
Edit: Seems the 6045Y can throttle the little up to 1601, whereas my 6045i maxes at 1113? I'd assume that is where the extra 3,500 in AnTuTu is coming from. Odd, in the CM OC kernel I was able to 1601 on the little..
Edit 2: Set the GPU to max clocks and performance governor, score 35,868. If little clocks would hit 1601 instead of 1113, I'm betting it would pass 37,000.
Final Thoughts: I've had zero issues with performance in any capacity, and the MOTO Camera for v2 Lollipop works great. I think we've got a winner here. Not a big fan of the news thing when you swipe to the left though, hopefully an easy way to get rid of that... and apparently its pretty easy, just press and hold on homescreen, then hit the toggle on the mini version of the news screen, gone!
Click to expand...
Click to collapse
Most folks could choose 1601 but their phone was rarely actually at that speed...people experiencing reboots should check their cpu temp in KA...in every case I encountered a reboot checking it right after boot showed it was still quite high and more than likely the cause of the reboot. You should however be able to set it to 1300 without issues.
I wouldn't use performance or interactive as they had all 4 cores going way to much of the time allowing temps to rise.....try "wheatley".
Android 6.0.1 for the Samsung Galaxy Nexus
Introduction
This is a moderately customized ROM for the Galaxy Nexus based on AOSP 6.0.1. It is a unified build that should work on all three variants: toro, maguro and toroplus. Focus is on stability and functionality, with many additional features pulled from other custom ROM projects and some that I have designed myself. My goal was to create a build stable enough for daily use (I still use this as my primary phone) while developing new features that help improve the overall Android experience.
I welcome any and all feedback, including bug reports and feature requests and of course, donations are always very much appreciated!
ROM Features
F2FS support for /data and /cache. System must be ext4.
LiveDisplay / color adjustment from Cyanogenmod
Screen rotation angles
Double-tap to sleep / Volume button wake / Wake on plug
Notification / Battery light colors
More pattern lock sizes : 4x4, 5x5, 6x6
Advanced reboot menu (moved to Developer options)
Hide ADB notification icon
Xposed compatible
Specify maximum number of recent apps (ro.config.max_recents)
Ability to turn off the display during the boot sequence (via power or volume keys)
Expanded Notification Panel width in Landscape Orientation
RRO Layers compatible
Recents privacy (more info here)
Less intrusive notifications sounds
Expanded desktop
Support for Google WebView package
Custom density scaling for display
More QS tiles: brightness, screen off, screenshot, volume panel, headsup, NFC, compass, sync,
USB tether, screen timeout, reboot, battery saver, quick record, LTE toggle (toro, toroplus), caffeine
QS quick pulldown
Option to disable brightness slider in QS shade / statusbar brightness control
Add haptic feedback option to QS tiles
Option to turn off dual tiles / show 4 tiles per row
Kernel Features
CPU frequency slots: 230-1632Mhz
CPU governors: dyninteractive, interactive, ondemand, ondemandplus, powersave, performance, ktoonservative, zzmoove
Min Screen On / Max Screen Off
I/O scheduler: row, zen, noop, deadline, cfq, sioplus
TCP congestion control: cubic, reno, bic, westwood, htcp
Fast Charge (with data transfer)
GPU Overclock (max 512MHz)
IVA Overclock
SmartReflex: Core, IVA, MPU
SmartReflex: Min calibrated voltages
Custom Voltages
Custom Regulator Voltages: VAUX3_6030, VAUX1_6030, VMMC, VANA, V2V1, VDAC, VCXIO, VUSIM, VMMC, VUSB
Color Settings (gamma offset, color multipliers)
Vibrator Intensity
Headphone Volume Boost
Emergency Battery Reserve (see this post for details)
GPU governors (on3demand, activeidle, onoff, userspace)
NEW! Contiguous Memory Allocator increases user RAM to 987MB
Instructions
Install / Upgrade:
Flash ROM
Flash Google Apps package
Flash SuperSU (optional)
Flash Xposed (optional)
If you are migrating from a different ROM, you must wipe /data!!
Reboot
Notes:
On the first boot after flashing/upgrading, the device will reboot itself once before the boot animation (Google Logo will display twice).
This ROM has been built without DEXPREOPT, so the initial boot will take considerably longer. For this reason, I have made the ability to turn off the screen during the boot sequence to hopefully save some wear and tear on the display.
This ROM uses the older graphics drivers and is therefore incompatible with any third party kernels! Please do not flash any other kernels with this ROM!
Downloads
Latest Build
zz_android-6.0.1-20161023-tuna.zip
Update 1
zz_android-6.0.1-20161023-tuna_update1.zip (flash this after flashing 10/23 build).
Changelog: 10/23/2016
Changelog: 10/23/2016 - Update1
Security Status
SELinux: Permissive
Android security patch level: October 5, 2016
Google Apps
http://opengapps.org/
Recommended Apps
Layers Manager (for theming)
TouchControl (Custom wake gestures, i.e. dt2w, s2w, etc. Choose "Ponury Stock Modified" kernel module)
3C Toolbox
Trickster MOD Kernel Settings
AZ Screen Recorder - No Root
Xposed (sdk23)
Bugs
Gesture typing doesn't work on stock keyboard but does work on Google Keyboard
Disclaimer
I'm not responsible for bricked devices (honestly, has anyone actually ever bricked a GNexus?), data loss, lack of rhythm and coordination. Please remember to ALWAYS make backups before you flash and if you are changing filesystems on /data, you will lose ALL DATA which includes everything on internal storage and the recovery will NOT give you any warning before it performs this highly destructive act, so just be aware! Thanks and enjoy!
Click to expand...
Click to collapse
Thanks To/Credits
Code:
[URL="http://forum.xda-developers.com/member.php?u=3390093"]MWisBest[/URL]
[URL="http://forum.xda-developers.com/member.php?u=2633638"]Ziyan[/URL]
[URL="https://github.com/Liquidsmooth"]LiquidSmooth[/URL]
[URL="https://github.com/slimroms"]SlimRoms[/URL]
[URL="https://github.com/omnirom"]omnirom[/URL]
[URL="http://www.cyanogenmod.org/"]CyanogenMod[/URL]
[URL="https://github.com/omap4-aosp"]The OMAP4-AOSP Team
[/URL]
XDA:DevDB Information
ZZ-Tuna: Android 6.x.x for the Samsung Galaxy Nexus, ROM for the Samsung Galaxy Nexus
Contributors
zzpianoman
Source Code: https://github.com/zzpianoman
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Beta
Beta Release Date: 2016-01-19
Created 2016-01-20
Last Updated 2016-11-05
Reserved
Previous Builds
09/19/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24732830915363022"]zz_android-6.0.1-20160919-tuna.zip[/URL]
07/20/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24588232905721594"]zz_android-6.0.1-20160720-tuna.zip[/URL]
06/29/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24588212152304381"]zz_android-6.0.1-20160629-tuna.zip[/URL]
05/10/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24539885398392963"]zz_android-6.0.1-20160510-tuna.zip[/URL]
04/11/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24499762635998646"]zz_android-6.0.1-20160411-tuna.zip[/URL]
03/10/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24438995911976744"]zz_android-6.0.1-20160310-tuna.zip[/URL]
[SIZE="3"][B][U]Update 2[/U][/B][/SIZE] (flash this on top of 03/10 build)
[URL="https://www.androidfilehost.com/?fid=24459283995307214"]zz_android-6.0.1-20160310-tuna_update2.zip[/URL]
02/19/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24421527759882829"]zz_android-6.0.1-20160219-tuna.zip[/URL]
[SIZE="3"][B][U]Update 1[/U][/B][/SIZE] (flash this on top of 02/19 build)
[URL="https://www.androidfilehost.com/?fid=24438995911967142"]zz_android-6.0.1-20160219-tuna_update1.zip[/URL]
02/12/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24415232478675623"]zz_android-6.0.1-20160212B-tuna.zip[/URL]
[SIZE="3"][B][U]Update 1[/U][/B][/SIZE] (flash this on top of 02/12 build)
[URL="https://www.androidfilehost.com/?fid=24415232478677302"]zz_android-6.0.1-20160212B-tuna_update1.zip[/URL]
02/02/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24399994186367512"]zz_android-6.0.1-20160202-tuna.zip[/URL]
01/24/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24389512218018491"]zz_android-6.0.1-20160124-tuna.zip[/URL]
01/19/2016
Code:
[URL="https://www.androidfilehost.com/?fid=24369303960689017"]zz_android-6.0.1-20160119-tuna.zip[/URL]
Reserved
Just FYI: Since I only have a toro, I'd like to get some confirmation that this works on maguro and toroplus, mainly GPS and cellular radio.
zzpianoman said:
Just FYI: Since I only have a toro, I'd like to get some confirmation that this works on maguro and toroplus, mainly GPS and cellular radio.
Click to expand...
Click to collapse
Sure. downloading now... :good:
Old drivers as in DDK1.8? Will be keeping an eye on this keenly...
how about camera?
Roman_Likhachev said:
how about camera?
Click to expand...
Click to collapse
Everything is working
Thank you @zzpianoman
After 30 minutes of booting, still stuck on the flashing android logo. should i wait more ?
Those who wanted to install trickster mod must install busy box
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
mlsoftlaberge said:
After 30 minutes of booting, still stuck on the flashing android logo. should i wait more ?
Click to expand...
Click to collapse
Booted for me in less than 15 mins, used opengapps also xposed
---------- Post added at 08:06 PM ---------- Previous post was at 07:16 PM ----------
Found a bug, after end of every call, the mobile network goes off for about 15 seconds
Just wanted to remind everyone to tell us which device you are using when you post a question since this is a unified build. Thanks!!
zzpianoman said:
Just wanted to remind everyone to tell us which device you are using when you post a question since this is a unified build. Thanks!!
Click to expand...
Click to collapse
As mentioned earlier on maguro, after each call the mobile network goes off for few seconds 15 to 30 seconds precisely apart from that everything ok
Toroplus
I've installed the rom on my sprint toroplus . Runs smooth as butta but I've not been able to get gapps or google play services going . Open gapps will flash but you can never get anywhere with it because setup wizard FC's over and over . I've flashed it without gapps . It boots up fast and runs perfectly without gapps . 3G comes on fast , calls work , bluetooth works well . Other gapps I've flashed complete successfully but aren't anywhere to be found once booted . I've also downloaded the latest google play store apk to try and get my google account connected but it FC's everytime I try to add my google account . I think this rom will be great if I can figure out a way to get some gapps on it . I've tried FML 6.01 and it doesn't have this gapps issue so that's a good sign . I intend to keep trying and if anyone has an idea of how to get around this please holla at me .It seems like it might be a permissions problem . ty
MonstaDriva said:
I've installed the rom on my sprint toroplus . Runs smooth as butta but I've not been able to get gapps or google play services going . Open gapps will flash but you can never get anywhere with it because setup wizard FC's over and over . I've flashed it without gapps . It boots up fast and runs perfectly without gapps . 3G comes on fast , calls work , bluetooth works well . Other gapps I've flashed complete successfully but aren't anywhere to be found once booted . I've also downloaded the latest google play store apk to try and get my google account connected but it FC's everytime I try to add my google account . I think this rom will be great if I can figure out a way to get some gapps on it . I've tried FML 6.01 and it doesn't have this gapps issue so that's a good sign . I intend to keep trying and if anyone has an idea of how to get around this please holla at me .It seems like it might be a permissions problem . ty
Click to expand...
Click to collapse
Make sure you install gapps BEFORE you boot into the system...or else you will get permissions errors. Flash ROM, flash gapps, wipe data, then boot.
Also, each time you upgrade to a new build, you MUST remember to flash gapps before you boot into the system...or else you will have to reformat the entire data partition. The runtime permissions framework in M is a bit of a hassle, and the kinks are likely still being worked out.
Good luck.
zzpianoman said:
Make sure you install gapps BEFORE you boot into the system...or else you will get permissions errors. Flash ROM, flash gapps, wipe data, then boot.
Also, each time you upgrade to a new build, you MUST remember to flash gapps before you boot into the system...or else you will have to reformat the entire data partition. The runtime permissions framework in M is a bit of a hassle, and the kinks are likely still being worked out.
Good luck.
Click to expand...
Click to collapse
Thanks for the reply . So there won't be any dirty flashing this for awhile then ? I did at first flash gapps when I flashed the rom . After all the FC's I did flash without and booted up . I am currently flashing dirty with MM daily on an S3 but that's another beast Lol .Are you saying I'll have to reformat just the data partition or do you mean entire sdcard partition ? At least we know data , telephony , bluetooth all good . I can't verify GPS until I can get something installed to test it with . ty
MonstaDriva said:
Thanks for the reply . So there won't be any dirty flashing this for awhile then ? I did at first flash gapps when I flashed the rom . After all the FC's I did flash without and booted up . I am currently flashing dirty with MM daily on an S3 but that's another beast Lol .Are you saying I'll have to reformat just the data partition or do you mean entire sdcard partition ? At least we know data , telephony , bluetooth all good . I can't verify GPS until I can get something installed to test it with . ty
Click to expand...
Click to collapse
If you are migrating from another ROM, you must wipe /data. You may dirty flash future builds of this ROM (unless otherwise specified) but you must always remember to flash the gapps package before you boot into the system, or else you will encounter the permissions errors.
zzpianoman said:
Just wanted to remind everyone to tell us which device you are using when you post a question since this is a unified build. Thanks!!
Click to expand...
Click to collapse
we should provide something like this at the start of the thread, so people know what to do
Please include your version of Galaxy Nexus in bug reports! (All versions are codenamed: Tuna)
GT-i9250 "Maguro" (World GSM)
SCH-i515 "Toro" (Verizon)
SPH-L700 "Toro Plus" (Sprint)
GT-i9250T (Australia)
SHW-M420S/K (Korea)
just for example. I took this info from wikipedia.
joshyzacariya said:
Sure. downloading now... :good:
Click to expand...
Click to collapse
I'm using I9250 - Maguro
GPS works, Cellular connection drops after each calls and regains in 5-15 seconds.
Camera ok, video recording ok. but I miss legacy camera that you included in LP.
Thanks @zzpianoman .
Thanks,
joshyzacariya said:
I'm using I9250 - Maguro
GPS works, Cellular connection drops after each calls and regains in 5-15 seconds.
Camera ok, video recording ok. but I miss legacy camera that you included in LP.
Thanks @zzpianoman .
Thanks,
Click to expand...
Click to collapse
Thanks for the feedback.
The Legacy Camera app does not work in M. The only reason I included it in the Lollipop CM builds was because Google Camera had a tendency to crash. This is no longer the case in Marshmallow, so I decided to abandon the Legacy Camera app altogether.
When you say the cellular connection drops, do you mean mobile data?
zzpianoman said:
Thanks for the feedback.
The Legacy Camera app does not work in M. The only reason I included it in the Lollipop CM builds was because Google Camera had a tendency to crash. This is no longer the case in Marshmallow, so I decided to abandon the Legacy Camera app altogether.
When you say the cellular connection drops, do you mean mobile data?
Click to expand...
Click to collapse
@zzpianoman , thanks for reply. It's not even mobile data the entire connection "no signal". I shall try to send a screenshot, if possible.
Thanks,