Related
I am getting ready for people to flame me but i am going to ask this anyway, where has the site that hosted the black ROMS? i need the 3G dialer Jasjamming has released. Is it possible someone has it and could post a link up here.
There is something wrong with the shadow site
http://www.4winmobile.com/forums/portal.php
can someone please tell me what the problem is!! when i try to log in i get told i need to download and install a piece of software which i have done but i still cant get into the site, i cant even ask a moderator from that site to help coz i cant see the site!!!
Help & thanks in advance
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
mrvanx said:
Its possible it might be on the official black site:
http://wmblack.info
but prolly not a good idea to post the dialer on here as jj has requested mirrors arent used.
The 3G dialer isnt a mirror of the 2G dialer (its the same as black dymond for now)
Click to expand...
Click to collapse
thanks for the advice, can you tell me how i can get to the site mentioned on my previous post? i dnt know how im ment to configure that zend software (also i dont think i hav a webserver(?!?) and im guessing you will know what to do!!
thanks again
P.S. your guides have saved my skin so many times!! (Got my first TYTN recently, ur guide helped me get rid of WM5!!) good work
dude...dont worry about the zend thing....the forum is down and it is a message for the web administrator...the zend engine is part of php.
The site is back up now
Here's the dialer that JJ posted earlier...
"Black Shadow Video Dial CONFIGURATION
For those of you who want Video Dial Capabilities on your Black Shadows you need to install the following:
BACKUP FIRST!!!!!
1. Install Part1.CAB then Soft Reset
2. Install Part2.CAB DONT Soft Reset (press cancel after it is installed --> then go to the next step)
3. Install Part3.CAB then Soft Reset
YOU MUST FOLLOW THE ABOVE EXACTLY TO THE LETTER OTHERWISE IT WONT WORK.
> DOWNLOAD HERE <
Once the above procedure is completed, it takes around 2mb of storage space.
This video dialer is the one found on Black Dymond 3.5 and the benefit is that I have made it compatable with
zombie skins. You can customize your dialer skins by visiting: http://www.zombienexus.net/portal/GL_Display.asp?SEC=3&EntryID=513
(Note: uninstalling the zombie skins may cause your video button to dissapear therefore to change your zombie skin, just reinstall another)
Once you have successfuly installed the 3g Video DIaler, the "3G Video Dialer" functionality
in Pimp my Black v0.2 works, hence you can enable and disable the 3g Video Dialer (but the non-video dialer
is the basic WM6 one)
Apologies for taking long on this, I was actually trying to port a dialer that matches the current NON-VIDEO one in the Shadow.
This was unsuccessful due to complication with incompatable DLL's for video telephony etc.
NOTE: Once you have completed this procedure you will permanently lose (well until you HR) the DEFAULT SHADOW big-button dialer in your PPC.
Thanks and Best Regards
JJ"
http://www.megaupload.com/?d=P2EK9VR5
thanks guys, i thought there was something wrong with my comp, it did say on the link last night that new software was needed n i jus assumed is was needed by me. anyway it works now.
also to ronfin44 thanks for the links and install instructions, i didnt realize it got rid of the big button dialer, do you think there is any way to just add a another button to the dialer and shrink the font size of the number output?
thanks again
i wonder if someone could edit the retouched wizard dialer available on this site?
megaupload is not working here.. can you please upload at rapidshare?
Here ya go. Try this link. It's the origianl thread JJ posted for it at win4mobile.
http://www.4winmobile.com/forums/hermes-black-rom-support/9975-video-dialer-4-shadow.html
just realized this is one app i cant use. anybody knows how i would be able to uninstall this? will deleting the .cab files uninstall it?
thanks
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
agovinoveritas said:
Seriously guy, you need to start reading more before trying stuff like this.
Why can't you not install the files? What error are you getting?
Secondly, and you may not know this but those *.cabs you are installing do change a number of items in your registry. You could try to just let it be, but you could have some unseen problems.
So, if you ran them and got half-way then you might want to finish the installation properly. However if you do not want to do that and want to go back to the way you were before, then you will have to do a Hard Reset.
ADDED EDIT: So to answer your question, no, deleting the *.cabs will change nothing.
Click to expand...
Click to collapse
i have successfully installed the 3g dialer. i did say i just realized i have no use for the app thats why i was asking how, if possible would i be able to uninstall it. no problem if i cant coz i know ill be HR anyways when i try out another rom. thanks for the reply.
Hi every1,
i wanted to know if thers a way to get panoromic BG on the latest NRG ROM (31st dec,see sig.)
ive tried numerous files from so many places on this forum but cant get my hands at the working mod..
right now im stuck with HDwalls) to make my walls as i cant even get BG for all to work for me(so using hdwalls only to get same wall papers on all my tabs)...
it will be great if some1 can direct me to proper location of these mods,ive been searching for 3 days now and nothing helped
I need following for 31st Dec rom of NRG:
1.Background for all tabs mod
2.Panoromic BackGround mod for NRG
Thanks
any help will be highly appriciated
Hello All,
It looks like Ayman at Ce4arabs.com and owner of http://code.google.com/p/arabicandroid/ has did it i have finally with me a fully arabized Hero. The OS is in English put Arabic is supported everywhere, I have checked the following software and i can confirm it works in:
Native SMS Client
Facebook app
web Browser
Warning:
Please do a nandroid backup before you attempt anything.
Nobody is responsible if you brick or damage your phone
Please contribute to this cause and approach Ayman for contribution/credits/thanks I am only a messenger.
Ok this is how it is accomplished.
Wipe Phone and Flash CKdroid 1.5 ROM (Kagu should also work but not tested maybe some one can confirm)
After Flashing the ROM proceed to the download page in Ayman Project ( http://code.google.com/p/arabicandroid/ ) and click downloads.
Download " update_ar2_n1_corrSkia.zip " and flash it
You guys can also use morelocale 2 (in the market to change the region to Arabic) and anysfotkeyboard to type Arabic.
That’s it. I will be happy to help if you guys need it Please provide feedback to help other members & Ayman out.
This is excellent!, I'm going to give it a try with kagudroid 1.1 and feedback!
Yes it's great work from Ayman, we need to support from xda-developers dev to add this Arabize to their ROMs like Mr. Adwin.
Regards
Just to confirm, I'm run KaguDroid and I've used libwebcore for the browser for a few days and installed the full pack 5 minutes after I got his tweet and it works flawlessly.
In fact, this is the only reason I upgraded to KaguDroid. It didn't work for me on 1.5.
Many thanks to Ayman Alsanad for his great work. I'll be sure to drop him a donation, it's well earned
Awesome!!
I tried extracting the libraries from his previous ROM and put it in Espresso/Hybrid and signed it .. didn't work !!
I think SenseUI (even Espresso's SenseUI) needs HTC modified libraries !!
Anyway, I'll try making a SenseUI ROM with these libraries.. or with Launcher2
but let me finish finals first :S
MaXo64 said:
Awesome!!
I tried extracting the libraries from his previous ROM and put it in Espresso/Hybrid and signed it .. didn't work !!
I think SenseUI (even Espresso's SenseUI) needs HTC modified libraries !!
Anyway, I'll try making a SenseUI ROM with these libraries.. or with Launcher2
but let me finish finals first :S
Click to expand...
Click to collapse
MAXO .. glad to see you here .. i really hate the fact that we can only use the arabizer with vanilla android .. i mean honestly .. SENSE UI rocks .. it's a candy to the eye + can't live with out the people and the messages widgets .. anyway, hopefully they can find a way to apply the arabizer to modaco .. atleast then we'll have a stable , sense UI rom to use
the guitarist said:
MAXO .. glad to see you here .. i really hate the fact that we can only use the arabizer with vanilla android .. i mean honestly .. SENSE UI rocks .. it's a candy to the eye + can't live with out the people and the messages widgets .. anyway, hopefully they can find a way to apply the arabizer to modaco .. atleast then we'll have a stable , sense UI rom to use
Click to expand...
Click to collapse
I'm going to give the New ROM VILLAIN a try and see if the arabizer works on it, that should fix the problem since its sense UI with 2.1!
awsy44 said:
I'm going to give the New ROM VILLAIN a try and see if the arabizer works on it, that should fix the problem since its sense UI with 2.1!
Click to expand...
Click to collapse
I tried it with all 2.1 ROMs with HTC sense with no succeed
I can confirm that SMS Arabize work on these ROMs but any Internet apps (web browser, Steal, Market and GMail) FC!
I can live with Arabize SMS only, but I could not solve the libwebcore.so?!
Hope some devs help us with that.
Regards
Yesssssssssssssssss
guys post a screenshot if the arabic font displaying on your phone please
ermacwins said:
Yesssssssssssssssss
guys post a screenshot if the arabic font displaying on your phone please
Click to expand...
Click to collapse
it works with any rom without SENSE UI for sure, try kugudroid, CKDroid or any other non sense UI rom ...
if u need screenshots check the Ce4arab the android section ..
Many thanks to Ayman for his heroic work , I would like to try it , but I really love sense UI and I don't want to give it up .
Are there anymore updates coming or is this final? Arabic texts are not fully connected but better than nothing
HTC Sense UI with arabic support
OK quick update,
I have started a small project to enable Arabic on sense UI. Yes that means that you can use madaco ROMs also as well as original ROMs. Cool huh. So far i am collecting source and editing them going well but slow.
I am also changing the HTC keyboard to type Arabic (this can take a While).
I did also notice some problems we reading Arabic with English numbers and that the Arabic text is always left aligned (actually i believe that this is the problem) so i will have a look on this also.
I hope can post back soon.
n646464 said:
OK quick update,
I have started a small project to enable Arabic on sense UI. Yes that means that you can use madaco ROMs also as well as original ROMs. Cool huh. So far i am collecting source and editing them going well but slow.
I am also changing the HTC keyboard to type Arabic (this can take a While).
I did also notice some problems we reading Arabic with English numbers and that the Arabic text is always left aligned (actually i believe that this is the problem) so i will have a look on this also.
I hope can post back soon.
Click to expand...
Click to collapse
You work is appreciated.
I can't wait for beta.
n646464 said:
OK quick update,
I have started a small project to enable Arabic on sense UI. Yes that means that you can use madaco ROMs also as well as original ROMs. Cool huh. So far i am collecting source and editing them going well but slow.
I am also changing the HTC keyboard to type Arabic (this can take a While).
I did also notice some problems we reading Arabic with English numbers and that the Arabic text is always left aligned (actually i believe that this is the problem) so i will have a look on this also.
I hope can post back soon.
Click to expand...
Click to collapse
I'm working on that too.. if you want, we can collaborate
anyway, yesterday I added Ayman's libraries with "Villain 1.1" and signed it..
it booted, and it reads Arabic fine .. but the Browser, and Market FC !!
I guess HTC modified the LibWebCore, not just the Browser..
I tweeted Lox today asking if HTC released their libraries source code so I can compile the "HTC version" of LibWebcore (redo Ayman's work) .. but he didn't respond yet
anyway, since it's Final exams period, I'll focus on them first..
after that I'll try to solve the browser and Market issue
MaXo64 said:
I'm working on that too.. if you want, we can collaborate
anyway, yesterday I added Ayman's libraries with "Villain 1.1" and signed it..
it booted, and it reads Arabic fine .. but the Browser, and Market FC !!
I guess HTC modified the LibWebCore, not just the Browser..
I tweeted Lox today asking if HTC released their libraries source code so I can compile the "HTC version" of LibWebcore (redo Ayman's work) .. but he didn't respond yet
anyway, since it's Final exams period, I'll focus on them first..
after that I'll try to solve the browser and Market issue
Click to expand...
Click to collapse
Do you know what is must weird thing, it's if you upload all Ayman libs to ROM with HTC sense the phone is work but as you faced any web apps FC and if you pushed libwebcore.so from original ROM and leave libskiagl.so and libskia.so the phone will not start at all! it will hang at Hero logo!
So I don't know if these libs are connected together somehow or not?!
I did a lot of research and I couldn't find an answer.
Can we share our experience on this problem?
Regards
One more thing, try the Arabizer with any 2.1 ROM like Vanilla and Hikara because I found 1.5 ROM doesn't have libskia.so and 2.1 ROM does.
Regards
HishamN said:
Do you know what is must weird thing, it's if you upload all Ayman libs to ROM with HTC sense the phone is work but as you faced any web apps FC and if you pushed libwebcore.so from original ROM and leave libskiagl.so and libskia.so the phone will not start at all! it will hang at Hero logo!
So I don't know if these libs are connected together somehow or not?!
I did a lot of research and I couldn't find an answer.
Can we share our experience on this problem?
Regards
Click to expand...
Click to collapse
I'm with you on this !!
we want an open knowledge and communication, not like other Arabic projects
I'll post any information I found regarding this ROM. and I hope all here will do the same.
and all my future ROMs and work will be Open Source and free (GPL). and if we collaborate on a ROM we must publish it as "XDA arabic community" or something like that
anyway, for now I have to finish some projects to start studying for Finals.
so see ya in two weeks .. wish me luck
OK I'll start:
Android 1.5 with HTC Sense (Modaco 3.1):
with libwebcore.so:
- Phone hang at Hero logo and it wouldn't boot at all.
with libskia.so:
- Nothing happen, because libskia.so is not included in Android 1.5
Android 2.1 with HTC Sense ([email protected] 9.5):
with libwebcore.so:
- Phone hang at Hero logo and it wouldn't boot at all.
with libskia.so:
- Phone hang at Hero logo and it wouldn't boot at all.
with libwebcore.so and libskia.so:
- Phone boot with no problem, Messaging read Arabic very well BUT any web apps like Browser, Market and Gmail FC!
-----
I googled several times to find any HTC Sense source code or it's structure but no luck .
So in my opinion we have to choose one of following Ways:
Way one:
- To find HTC sense source code to know why compiled libs not working.
Way two:
- Try to solve the FC apps.
Thanks
by the way MaXo64. good luck with your finals.
Regards
HishamN said:
OK I'll start:
Android 1.5 with HTC Sense (Modaco 3.1):
with libwebcore.so:
- Phone hang at Hero logo and it wouldn't boot at all.
with libskia.so:
- Nothing happen, because libskia.so is not included in Android 1.5
Android 2.1 with HTC Sense ([email protected] 9.5):
with libwebcore.so:
- Phone hang at Hero logo and it wouldn't boot at all.
with libskia.so:
- Phone hang at Hero logo and it wouldn't boot at all.
with libwebcore.so and libskia.so:
- Phone boot with no problem, Messaging read Arabic very well BUT any web apps like Browser, Market and Gmail FC!
-----
I googled several times to find any HTC Sense source code or it's structure but no luck .
So in my opinion we have to choose one of following Ways:
Way one:
- To find HTC sense source code to know why compiled libs not working.
Way two:
- Try to solve the FC apps.
Thanks
by the way MaXo64. good luck with your finals.
Regards
Click to expand...
Click to collapse
Excellent work HishamN, your work saved us alot of flashing , I think trying to sort out the FC's should be much easier than actually trying to fix or modify the htc coding.
Hey Guys, iam new here so iam sorry if iam in the wrong topic.
I've got an HTC Desire with Android 2.2.
Today i found a style on a picture (see in attachments)
and i want to set my Desire with the same "style" ( is it "called" style?!)
so i startet to try out,how to get it. but i don't know how to do...so iam a fully noob.
Maybe anyone can tell me how to do this?!
Thanks - Patrick
What site did you get that from. Looks like a new ROM
Looks like a highly customized ROM.
Find the source and see, what widgets/launcher/icons the owner used.
I found this one here
---> http://forum.xda-developers.com/showpost.php?p=10095442&postcount=79
Well everything is on the picture, what you need to download.
Launcher is probably ADW or GO Launcher EX. Rom - CM7 IMO.
So I recently bought the m99 from fastcardtech, and rooted it easily with SuperOneClick. I am unable however to install ClockworkMod in any way or form on the device. It identifies itself as a G2x in the model, uses a MTK 6573 processor.
Anyone else have this phone and figure out a way, I'm completely lost and have search for a good week now trying to figure out a way to get ClockWorkMod on this thing.
(also I'm not sure if this is the correct forum to post this in, since there is no forum for my phone model).
Hi There ,
would you please tell me where can i download the original ROM or a full backup for this phone .. i got this phone yesterday and i managed to root it and delete all the chinese apps .
Thanks
Hello
I have one of this this.
And i like to root and first backup the room original one, how can i do that?
For root z4root works or not?
How can i install the market anyone know?
Thanks
---------- Post added at 04:31 PM ---------- Previous post was at 04:24 PM ----------
CustomKal said:
So I recently bought the m99 from fastcardtech, and rooted it easily with SuperOneClick. I am unable however to install ClockworkMod in any way or form on the device. It identifies itself as a G2x in the model, uses a MTK 6573 processor.
Anyone else have this phone and figure out a way, I'm completely lost and have search for a good week now trying to figure out a way to get ClockWorkMod on this thing.
(also I'm not sure if this is the correct forum to post this in, since there is no forum for my phone model).
Click to expand...
Click to collapse
Hello
You have the M99 with Ui iphone?
Did you have the room original? Was nice we get this room available, before try the OC and new rooms.
Any bugs find yet?
Thanks
help me too.. is this a bug?
Did you have the market worked on your phone?
My version is 2.3.6 from android, but the markets i install open, then when i try to download some app they market (process com.vending.android) has stopped unexpectedly
You have this problem to?
Guys ..
To root this phone you have 2 options :
1- SuperOneClick 2.3.3
2- The Chinese root
both are listed at a thread called (Gooapple v5 issues) on this fourm . you also need to install the the drivers for this phone which btw are the same drivers for the GooApple v5 , cuz both phones use the MTK6573 .
for the market problem .. try to install an older market ver.
now I have the phone , but unfortunately things went south couple days ago when i installed some fonts from the android market and forgot to change the permissions . the phone now is stuck at start up logo ,, i tried the wipe and restore to factory options but nothing worked .. the only way i can get it to work is to flash it with the original rom again .i've contacted Fastcardtech to get the update.zip rom for the M99 Google 4s+ , but i haven't heard from them .
so if you have the update.zip rom for M99 Google 4s+ please post a link so i can download it ..
Thanks
Thanks for reply!
Wich market version you use?
Your M99 was from fastcardtech? android 2.3.6?
Well i can help you but im noob in android, how can i get this zip file, or maybe make a "image" of this rom phone like they came to send to you (if this is possible)
Thanks
Mouratti said:
Thanks for reply!
Wich market version you use?
Your M99 was from fastcardtech? android 2.3.6?
Well i can help you but im noob in android, how can i get this zip file, or maybe make a "image" of this rom phone like they came to send to you (if this is possible)
Thanks
Click to expand...
Click to collapse
i truly appreciate you trying to help
i'm looking for both now (rom and a reliable recovery) that can actually work on our phones
i've been looking through the chinese forums in the last couple days , but still no luck .. the problem is the name M99 dosn't exist in thier forums they only have the old ver M98 .. so our phone must have a different name other than M99 ...
i can't really remember which market ver worked , i've tried alot of versions but i'm sure the one that worked was one of the old vers . i wish my phone was working so i can help ya there .
yes i got it from fastcardtech and it has the 2.3.6 with UI rom .
i'll keep looking and i will let you know .
Thanks
Did you try the cyanongean??
How can i help you with the rom??
Did you try root your phone and install any rom?
If you know how can i do to save this rom and send to you it's ok i try.
For the market i used other one apdroid i guess the name and works
How do you enter on recovery wipe?? What you install to get the phone stuck!?
Thanks
IIIVIII said:
i truly appreciate you trying to help
i'm looking for both now (rom and a reliable recovery) that can actually work on our phones
i've been looking through the chinese forums in the last couple days , but still no luck .. the problem is the name M99 dosn't exist in thier forums they only have the old ver M98 .. so our phone must have a different name other than M99 ...
i can't really remember which market ver worked , i've tried alot of versions but i'm sure the one that worked was one of the old vers . i wish my phone was working so i can help ya there .
yes i got it from fastcardtech and it has the 2.3.6 with UI rom .
i'll keep looking and i will let you know .
Thanks
Click to expand...
Click to collapse
Hi guys, I am from the thread "Gooapple v5 issues" I could maybe help you as it is almost the same device.
@IIIVIII What happened to your phone?
Great News ..
i finally gained access to my phone's root while looping through Android Commander and i've managed to reset the permissions to the fonts and now the phone is alive and kicking
@ von275 & Mouratti .. Thank you guys for offering to help i really appreciate it .
here's how to get any Androidmarket ver working on the M99 :
1- root your phone.
2- install root explorer (attached)
3- copy the attached file (Vending) to your phone's root (system/app) and make sure u set the permissions as follows:
Owner: Read /Write
Group: Read
Others: Read
To make Google sync work for contacts do the same as the above steps for these attached files :
1-GoogleCalendarSyncAdapter
2-GoogleContactsSyncAdapter
btw. with root explorer you can remove all the unwanted chinese apps like youku etc. from your root (system/app) just don't go wild ..
i'll be coming back later on with more tweaks ..
IIIVIII said:
Great News ..
i finally gained access to my phone's root while looping through Android Commander and i've managed to reset the permissions to the fonts and now the phone is alive and kicking
@ von275 & Mouratti .. Thank you guys for offering to help i really appreciate it .
here's how to get any Androidmarket ver working on the M99 :
1- root your phone.
2- install root explorer (attached)
3- copy the attached file (Vending) to your phone's root (system/app) and make sure u set the permissions as follows:
Owner: Read /Write
Group: Read
Others: Read
To make Google sync work for contacts do the same as the above steps for these attached files :
1-GoogleCalendarSyncAdapter
2-GoogleContactsSyncAdapter
btw. with root explorer you can remove all the unwanted chinese apps like youku etc. from your root (system/app) just don't go wild ..
i'll be coming back later on with more tweaks ..
Click to expand...
Click to collapse
Great news
Nice one i will try this, did you have a new rom for this phone?
Wich one?
I saw a bug i guess i can put any reminder with a beep sound on my phone, its normal?
Thanks
Mouratti said:
Great news
Nice one i will try this, did you have a new rom for this phone?
Wich one?
I saw a bug i guess i can put any reminder with a beep sound on my phone, its normal?
Thanks
Click to expand...
Click to collapse
Hello Guys
I make a mistake and i delete the keyboard how can i put the keyboard again? Can i install on in market or doing what?
I install a few one but doesn't appear
PS: Now i get it
@Mouratti
try a keyboard called (ITap) or (anysoftkeyboard) both can be found on androidmarket .. get rid of the chinese keyboard these 2 are alot better . plus ITap has IPhone layout so u wont miss the old keyboard
no i heaven't heard from Fastcardtech ..so no new rom
i fixd the phone while running loop on the original rom .
Mouratti said:
Hello Guys
I make a mistake and i delete the keyboard how can i put the keyboard again? Can i install on in market or doing what?
I install a few one but doesn't appear
PS: Now i get it
Click to expand...
Click to collapse
I Have my market work and keyboard and calendar too
Thanks a lot !!
Now i just want a new rom to this
great my friend ..
i'm experimenting different kind of recovery systems . i'm trying to find the perfect one for the M99 so we can flash custom roms .. unfortunatly the chinese recovery that works on the Gooapple/Goophone dosn't work on our phone .. but i'll keep trying .
for the official rom i'm still waiting for Fastcardtech to provide the update.zip .. once i have it i will upload it to mediafire and i'll post a link here for everyone to download .
IIIVIII said:
great my friend ..
i'm experimenting different kind of recovery systems . i'm trying to find the perfect one for the M99 so we can flash custom roms .. unfortunatly the chinese recovery that works on the Gooapple/Goophone dosn't work on our phone .. but i'll keep trying .
for the official rom i'm still waiting for Fastcardtech to provide the update.zip .. once i have it i will upload it to mediafire and i'll post a link here for everyone to download .
Click to expand...
Click to collapse
I speak with fastcrdtech, and they say: We don't have rom
So you have the rom that came with your phone right?
I get the calendar working, but i can't get a sound reminder you can get on your m99?
Thanks for the help
Mouratti said:
I speak with fastcrdtech, and they say: We don't have rom
So you have the rom that came with your phone right?
I get the calendar working, but i can't get a sound reminder you can get on your m99?
Thanks for the help
Click to expand...
Click to collapse
Did you guys tried the gooapple v5/goophone roms on your phones? It should work because it is the same hardware.
Download for roms: www.anexonel.tk in the download section.
von275 said:
Did you guys tried the gooapple v5/goophone roms on your phones? It should work because it is the same hardware.
Download for roms: www.anexonel.tk in the download section.
Click to expand...
Click to collapse
I didn't try, im noob in this, and im afraid stuck my device.
Which room is it?
@von275
the stock recovery on the M99 only allows the official M99 update.zip rom to be installed .. it won't allow the gooapple nor any other rom to be installed trust me i've tried .. besides the M99 has 2 sims and a different screen so i really doubt that it would work even if we try it with a recovery that allows custom roms ...
@Mouratti
i don't have the official rom yet we should all e-mail Fastcardtech and ask them to provide the official rom for us to download .. sooner or later somthing will go wrong with our android sys and we will need to flash the official rom again .
regarding the calender .. i will look into it when i get home hopefully there's a simple fix for it .