Hey guys I bought a usb otg cable and everything connects fine, except this 300gb hard drive I have, I've tested with several different 300gb+ drives and none of them connect, could it be because they are NTFS?
I'm on stock, not rooted
I think that may be the problem. Android likes FAT. I know that for older phones there have been threads on XDA with mods for allowing android to mount NTFS volumes (called NTFS mounter), probably just a matter of time until that functionality is brought to the S3.
Thanks, I guess I'll wait
You need a mod or app of some sort to handle NTFS drives. There are some in the Play Store that people have reported will do this...
However, there might be another problem. When I connect my 1TB WD Passport with USB OTG, it beeps and the HD light flashes...I believe it's indicating that the phone does not supply enough power via USB to run the hard drive. I can tell the drive is not spinning.
I'm not sure if this is the case for all portable drives...and I imagine it's not an issue with a larger externally powered drive.
Hello,
I have a USB otg connection adapter and thumb drives and sd cards work fine. Higher power devices (external 2.5" HDD) don't work as they need more power. I have a Y usb cable for my external hard drive (one usb plug for data and one for extra power). Can I connect the data plug to my otg adapter and the other usb connector to a wall charger in order to make my Note work with my hard drive? Or am i going to break something in my Note as there are no diodes in the y-cable blocking current going from the wall charger into my Note?
edit: and if this works: any suggestions for the file structure? FAT is not ideal due to file size limitations and NTFS is not ideal due to licensing. Does the Note supports exFAT up to 1 TB?
Yes, you can. You can use a wall adapter, a powered USB hub or like me, a portable battery with USB output that lets you use that HDD on the go.
Szadzik said:
Yes, you can. You can use a wall adapter, a powered USB hub or like me, a portable battery with USB output that lets you use that HDD on the go.
Click to expand...
Click to collapse
I've noticed that the 10.1 won't power some things like a 2.5" portable drive that my Note 2 can power just fine. Not sure if there is a reason for this and it's working as intended or just a bug?
gmkelly001 said:
I've noticed that the 10.1 won't power some things like a 2.5" portable drive that my Note 2 can power just fine. Not sure if there is a reason for this and it's working as intended or just a bug?
Click to expand...
Click to collapse
It is only by a fluke that the Note 1 powers an HDD. These devices are not designed to power anything but USB sticks. Not sure if there is enough juice to power a USB3 stick so do not look for bugs or solutions as this is not a bug but that how the device is designed.
I'm curious what external storage devices folks are using with their Fire TVs to avoid the low-memory warnings. Are you using large hard drives, or little thumb drives? If the latter, is 32GB enough?
Here's a link to something I was considering using for external storage: A tiny, low-profile USB 3 flash drive with 32GB of storage:
http://www.amazon.com/SanDisk-Ultra...Z43-032G-G46/dp/B00LLER2CS/ref=dp_ob_title_ce
IMHO without root you can not use any external media since USB mounting is not supported out-of-the-box.
Raymondo17 said:
I'm curious what external storage devices folks are using with their Fire TVs to avoid the low-memory warnings. Are you using large hard drives, or little thumb drives? If the latter, is 32GB enough?
Here's a link to something I was considering using for external storage: A tiny, low-profile USB 3 flash drive with 32GB of storage:
http://www.amazon.com/SanDisk-Ultra...Z43-032G-G46/dp/B00LLER2CS/ref=dp_ob_title_ce
Click to expand...
Click to collapse
I use a 32GB USB3 Stick which (on USB3) write about 60mb/s and reads about 80mb/s. I never testet it on USB2. In direct comparation of two firetvs running asphalt8 one from emmc one from USB the USB firetv is about a second later in the game which
is IMHO totaly fine.
How do you mount it? My non-rootable aTV does not recognize storage devices on USB.
Calibaan said:
How do you mount it? My non-rootable aTV does not recognize storage devices on USB.
Click to expand...
Click to collapse
Your device must be rooted.
Ah, OK so nothing new. Thought I´ve missed something.
I'm using an older Western Digital My Passport 320gb and mounted my internal data to it. I connected it to a small powered hub and also have a wireless mouse/keyboard dongle and wireless game controller connected to the hub. It works wonderfully. Only a slight delay compared to having data still on the FTV itself.
Your performance will always be limited to the transfer speeds of whatever external storage you're using. So it's not as easy as saying use HDD over USB Flash or vice versa. You can use either, just be sure that what you use has good transfer rates.
KCFish said:
Your performance will always be limited to the transfer speeds of whatever external storage you're using. So it's not as easy as saying use HDD over USB Flash or vice versa. You can use either, just be sure that what you use has good transfer rates.
Click to expand...
Click to collapse
Exactly. I first tried a flash drive I had laying around. It turned my FTV into a slow crawl.
derpeter said:
I use a 32GB USB3 Stick which (on USB3) write about 60mb/s and reads about 80mb/s. I never testet it on USB2. In direct comparation of two firetvs running asphalt8 one from emmc one from USB the USB firetv is about a second later in the game which is IMHO totaly fine.
Click to expand...
Click to collapse
Good to know, as I'd read that USB sticks would offer lousy performance.
KCFish said:
Your performance will always be limited to the transfer speeds of whatever external storage you're using. So it's not as easy as saying use HDD over USB Flash or vice versa. You can use either, just be sure that what you use has good transfer rates.
Click to expand...
Click to collapse
An excellent point. I did find a thumb drive, the Kingston Digital HyperX 3.0 Data Traveler, with what appears to be good transfer rates: 225MB/s read and 135MB/s write.
http://www.amazon.com/Kingston-Digi...99462&sr=8-2&keywords=Kingston+HyperX+MAX+3.0
For around the same price, I could get this Toshiba Canvio portable drive, which would hold over ten times as much data, but I can't seem to pin down the exact read/write times. The stats say up to 480 Mb/s transfer rate, which does sound pretty good to me.
http://www.amazon.com/Toshiba-Canvi...2683&sr=1-16&keywords=external+usb+hard+drive
Another question I have is whether using a USB 3 drive would even matter since the Fire TV is only USB 2?
Raymondo17 said:
Good to know, as I'd read that USB sticks would offer lousy performance.
An excellent point. I did find a thumb drive, the Kingston Digital HyperX 3.0 Data Traveler, with what appears to be good transfer rates: 225MB/s read and 135MB/s write.
http://www.amazon.com/Kingston-Digi...99462&sr=8-2&keywords=Kingston+HyperX+MAX+3.0
For around the same price, I could get this Toshiba Canvio portable drive, which would hold over ten times as much data, but I can't seem to pin down the exact read/write times. The stats say up to 480 Mb/s transfer rate, which does sound pretty good to me.
http://www.amazon.com/Toshiba-Canvi...2683&sr=1-16&keywords=external+usb+hard+drive
Another question I have is whether using a USB 3 drive would even matter since the Fire TV is only USB 2?
Click to expand...
Click to collapse
Most USB3 stick have faster controller and faster memory then the old USB2.0 versions. It is hard to find a fast USB2.0 Stick so you may be better of buying a USB3 stick and use it on the USB2.0 port of the aftv. (Which not mean that there are no slow USB3.0 sticks)
I can also recomment the sandisk extrem 32GB USB3.0 stick its even faster then the one in my tests but that should not matter on the USB2.0 port of the firetv.
derpeter said:
Most USB3 stick have faster controller and faster memory then the old USB2.0 versions. It is hard to find a fast USB2.0 Stick so you may be better of buying a USB3 stick and use it on the USB2.0 port of the aftv. (Which not mean that there are no slow USB3.0 sticks)
I can also recomment the sandisk extrem 32GB USB3.0 stick its even faster then the one in my tests but that should not matter on the USB2.0 port of the firetv.
Click to expand...
Click to collapse
Excellent. Thanks for the info.
I used my old 128gb ssd samsung evo 840 as whole System. fast like normal System. No slowdown. i use an active usb 4 Port hub also connected Xbox 360 Wireless Transmitter usb dongle for Wireless mouse+Keyboard. One Thinge i can't use a Second harddrive as external.
dowsn't Sebamed to work as i use datatousb from cwm Post. Maybe only usererror. bussymount killed my Setup (Boot from usb)
Gesendet von iPhone mit Tapatalk
Hi
As there are only 2 usb on shield, did anyone tried usb hub for it? Does any work?
Kajman said:
Hi
As there are only 2 usb on shield, did anyone tried usb hub for it? Does any work?
Click to expand...
Click to collapse
Ive got a generic 2.0 hub 4 ports working........pretty sure others work
Although you might wanna google search "shield tv usb 3.0 shielding" or something to that affect, i cant remember the exact details, but i read there may be some issues with 3.0 hubs because the shielding around the 3.0 ports on our shields, was not the best, or non existant, cant remember............issues about "interference"..............like i said, i dont know the exact details..........was waiting to look it up when i decided to finally think about buying a 3.0 hub...........and as im writting this, i think that may be now
Kajman said:
Hi
As there are only 2 usb on shield, did anyone tried usb hub for it? Does any work?
Click to expand...
Click to collapse
I'm using an Anker USB 3.0 one perfectly fine with it. Haven't tried benchmarking speeds or anything but works fine with my xbox 360 wireless receiver, wired logitech gamepad controllers as well as a regular Logitech K400 receiver (but range does feel a bit weak, not sure if it's due to interference or lower power, but I feel like it's more interference as I had some issues without the hub). I usually use the other native usb port on the shield for charging the remote/controller. Might try a powered usb 3.0 hub later if I find I need to. But this one works just fine powered from the shield.
you didn't try to connect there f.e. 2 hdd and usb sticks?
I'm interested in the Shields behavior concerning multiple HDD's on a USB hub. I read in the past that the Shield TV did not support more than 2 ext HDD's through USB simultaneously. This is said to be a firmware limitation and rooting can solve that. I'm not rooting so curious as to whether that limitation has since been officially removed.
I'm looking to try out a Sabrent 4 port USB 3 hub. It's not powered. So how many HDD's can an unpowered HUB such as this one support?
If the hub won't serve my purpose then I''ll just use a couple of USB3 extension cables since my main need is easy access to USB device swapping. Getting to the back of the Shield is kind of a pain.
I use an unpowered usb 3 hub and it works fine. I have it hooked up to the cable used to charge the remote and controller, a wireless keyboard and a 128gb ssd in an external usb 3 enclosure. I am rooted so cant comment on the 2 hdd limitation.
Sent from my LG-H901 using Tapatalk
mad212 said:
I use an unpowered usb 3 hub and it works fine. I have it hooked up to the cable used to charge the remote and controller, a wireless keyboard and a 128gb ssd in an external usb 3 enclosure. I am rooted so cant comment on the 2 hdd limitation.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Thx for the feedback. Nvidia will be adding a feature that may allow use of multiple ext HDD on the USB ports. Have to wait and see.
Yup
copticwalad said:
I'm using an Anker USB 3.0 one perfectly fine with it. Haven't tried benchmarking speeds or anything but works fine with my xbox 360 wireless receiver, wired logitech gamepad controllers as well as a regular Logitech K400 receiver (but range does feel a bit weak, not sure if it's due to interference or lower power, but I feel like it's more interference as I had some issues without the hub). I usually use the other native usb port on the shield for charging the remote/controller. Might try a powered usb 3.0 hub later if I find I need to. But this one works just fine powered from the shield.
Click to expand...
Click to collapse
It's nice and at available rate. I am also prefer Anker USB 3.0 one.
Kajman said:
you didn't try to connect there f.e. 2 hdd and usb sticks?
Click to expand...
Click to collapse
See my answer after next quote.
OrlyD said:
I'm interested in the Shields behavior concerning multiple HDD's on a USB hub. I read in the past that the Shield TV did not support more than 2 ext HDD's through USB simultaneously. This is said to be a firmware limitation and rooting can solve that. I'm not rooting so curious as to whether that limitation has since been officially removed.
I'm looking to try out a Sabrent 4 port USB 3 hub. It's not powered. So how many HDD's can an unpowered HUB such as this one support?
If the hub won't serve my purpose then I''ll just use a couple of USB3 extension cables since my main need is easy access to USB device swapping. Getting to the back of the Shield is kind of a pain.
Click to expand...
Click to collapse
I finally got around to grabbing all my usb sticks and hdd's and a few devices and trying it out. I found that there is some sort of firmware limitation that allows only 2 usb storage (FDD + HDD) devices to show up. I'm not rooted yet and am still on stock ROM but may look to change that after we get marshmallow this month. Keep in mind though you can power an xbox 360 for windows wireless receiver, a logitech unifying receiver, even logitech wired gamepads along with 2 Storage drives (HDD or FDD) on a single usb port. I did try a 5400RPM usb 3.0 in NTFS drive along with a few flash drives in exFAT, NTFS, and FAT32 formats. The way I'm noticing it's behavior is you can have say 5 drives connected overall, say a 7200rpm on other main usb port, and then 5400rpm + 3 flash drives on unpowered usb hub but the Key is, the system will ONLY show you the last two plugged in. If one is removed, it should show another one (if not then you'll need to disconnect/connect) and they are all powered interestingly, even when not shown up.
Summary from my tests so far:
-Connect as many USB devices (controllers, keyboard mouse receivers, xbox 360 receivers, HDDs, FDDs) as you want through usb hubs, if you have more than two 2.5" drives I'd recommend a powered usb hub.
-All devices so far have lit up and power on as long as there's enough power
-The obvious Limitation so far, is software limits access to 2 most recently connected Storage USB Devices, this is despite being fully lit up and hard drives spinning. You can unmount them easily though in Android Settings -> Storage & Apps -> Unmount.
*This is reflected in both ES File Explorer and Android Settings
I'm going to talk about how I usually approach watching my media... so feel free to read
*I recommend to everyone to try and find alternatives to ease your lives. I'm a crazy tech enthusiast and even though I have soo many hard drives and flash drives from over the years, I've learned to simplify things and accommodate accordingly. For example PLEX is an amazing solution for watching videos over the network on this nvidia shield, and even though I do plan to eventually use Gigabit, wireless AC over 5Ghz is ridiculous on this thing and has no lag. In fact, even though I could connect my 6TB external hard drive to the unit directly, I still prefer the plex interface and ability to watch on my phone or tablet instead of my tv based on a number of factors. The other thing you could do if you don't like plex is simply use Windows network interface and Share 1 specific folder to your network that you can easily access on ES File Explorer. You can make it a little easier by assigning a specific computer in your house to 1 Local address, so the ip address never changes. For example: 192.168.1.2 could be assigned to your favorite computer, so then in ES File explorer you can save that SHARED folder as a favorite after scanning your network and then access it easily and wirelessly and not worry about flash drives etc..... Lastly don't forget about the awesome Casting abilities of the Nvidia Shield, so you can just cast your screen on your smartphone/tablet and if you have family photos on say Google Photos (released 6/2015 and highly recommended for everyone), you can cast them all on the big screen. Don't be like how I used to be and have literally over 10 drives and flash drives, each hard drive being like 500gb or 1TB and a bunch of scattered media on flash drives. Instead simplify your life and put all your media on 1 huge hard drive (ideally with RAID 1 security backup built in or offsite backup) and keep maybe one On The Go speedy flash drive, like Sandisk Extreme USB 3.0, for media you put temporarily to watch on a trip or something. Let me know if there's anything else I can do to help, but that's a summary for novices.
copticwalad said:
See my answer after next quote.
I finally got around to grabbing all my usb sticks and hdd's and a few devices and trying it out. I found that there is some sort of firmware limitation that allows only 2 usb storage (FDD + HDD) devices to show up. I'm not rooted yet and am still on stock ROM but may look to change that after we get marshmallow this month. Keep in mind though you can power an xbox 360 for windows wireless receiver, a logitech unifying receiver, even logitech wired gamepads along with 2 Storage drives (HDD or FDD) on a single usb port. I did try a 5400RPM usb 3.0 in NTFS drive along with a few flash drives in exFAT, NTFS, and FAT32 formats. The way I'm noticing it's behavior is you can have say 5 drives connected overall, say a 7200rpm on other main usb port, and then 5400rpm + 3 flash drives on unpowered usb hub but the Key is, the system will ONLY show you the last two plugged in. If one is removed, it should show another one (if not then you'll need to disconnect/connect) and they are all powered interestingly, even when not shown up.
Summary from my tests so far:
-Connect as many USB devices (controllers, keyboard mouse receivers, xbox 360 receivers, HDDs, FDDs) as you want through usb hubs, if you have more than two 2.5" drives I'd recommend a powered usb hub.
-All devices so far have lit up and power on as long as there's enough power
-The obvious Limitation so far, is software limits access to 2 most recently connected Storage USB Devices, this is despite being fully lit up and hard drives spinning. You can unmount them easily though in Android Settings -> Storage & Apps -> Unmount.
*This is reflected in both ES File Explorer and Android Settings
I'm going to talk about how I usually approach watching my media... so feel free to read
*I recommend to everyone to try and find alternatives to ease your lives. I'm a crazy tech enthusiast and even though I have soo many hard drives and flash drives from over the years, I've learned to simplify things and accommodate accordingly. For example PLEX is an amazing solution for watching videos over the network on this nvidia shield, and even though I do plan to eventually use Gigabit, wireless AC over 5Ghz is ridiculous on this thing and has no lag. In fact, even though I could connect my 6TB external hard drive to the unit directly, I still prefer the plex interface and ability to watch on my phone or tablet instead of my tv based on a number of factors. The other thing you could do if you don't like plex is simply use Windows network interface and Share 1 specific folder to your network that you can easily access on ES File Explorer. You can make it a little easier by assigning a specific computer in your house to 1 Local address, so the ip address never changes. For example: 192.168.1.2 could be assigned to your favorite computer, so then in ES File explorer you can save that SHARED folder as a favorite after scanning your network and then access it easily and wirelessly and not worry about flash drives etc..... Lastly don't forget about the awesome Casting abilities of the Nvidia Shield, so you can just cast your screen on your smartphone/tablet and if you have family photos on say Google Photos (released 6/2015 and highly recommended for everyone), you can cast them all on the big screen. Don't be like how I used to be and have literally over 10 drives and flash drives, each hard drive being like 500gb or 1TB and a bunch of scattered media on flash drives. Instead simplify your life and put all your media on 1 huge hard drive (ideally with RAID 1 security backup built in or offsite backup) and keep maybe one On The Go speedy flash drive, like Sandisk Extreme USB 3.0, for media you put temporarily to watch on a trip or something. Let me know if there's anything else I can do to help, but that's a summary for novices.
Click to expand...
Click to collapse
A bit of an old bump/OT but do you stream 4k over wifi or is it just 1080p? Because my ShieldTV is hating 4k streaming on my 5ghz ac wifi and im not sure what's up.
I am streaming 4k on wifi without problems with only 60-80mbit wifi repeater capabilities (real download speed).
test878 said:
A bit of an old bump/OT but do you stream 4k over wifi or is it just 1080p? Because my ShieldTV is hating 4k streaming on my 5ghz ac wifi and im not sure what's up.
Click to expand...
Click to collapse
My bad for not seeing this until now, and actually perhaps it's a good thing I just saw this because I finally got to try out a true 4K movie over plex and compared it to locally on Nvidia Shield vs USB on 4K TV (Samsung SUHD). I'm gonna talk a little bit about HDR and 4k limitations so far and maybe adoptable storage experience.
Quick Background:
-Nvidia Shield 16gb with latest official 3.0 MM Update, not rooted. Adoptable Storage using 128gb Samsung Pro Plus MicroSDXC (90MB/s read and write).
-Samsung UN65JS8500 4K TV with HDR abilities and HDMI 2.0a
-Networking still currently over 5Ghz wireless ac to Netgear Nighthawk router and also to my Plex Server (with 300Mbps average wireless connection).
-Media samples of true 4K 10-bit encoded in the brilliant x265 HEVC @ 5.2Mbps (comparative to 10Mbps x264) , a 4K HDR sample from Life of Pi
~TV plays 4K 10-bit and HDR perfectly locally on USB 3.0 flash drive, I'll have issues getting subtitles to work with mkv on occasion because of Samsung's media player.
~Nvidia Shield plays 4K and 10-bit perfectly locally on VLC Player and MX Player from both adoptable storage and usb 3.0 drives, keep in mind that adoptable storage cannot be used or even seen on any computer (unless you plan on formatting it) because of its encryption, despite not having PIN or passcodes on SATV.
- HOWEVER, HDR would not work at all as I don't think the update included HDMI 2.0a (which HDR requires). Luckily Nvidia says it can be upgradeable in future with firmware.
As for streaming 4K over wifi, it works perfectly from Youtube but my big test today was for over the network from a pc with a 'native' 2160p movie rather than upscaled and I found the limitation to be the transcoding on my core i7 laptop. I got a warning at the start from Plex denoting that and afterwards it would slowly work but constantly buffer.
-I'm planning on implementing Gigabit wires to shield and tv and possibly back to my laptop but 4K transcoding is very demanding. Unfortunately on the Plex app on Android tv it doesn't give you the option to try direct play but I feel like that option might work to stream without transcoding. I'm going to try it again but from the tv (which has half the wireless speeds but at least the option to direct play from plex).
Really depends what source you're streaming 4K from. I also have 65Mbps internet connection with no issues and even delays when streaming from Youtube or Amazon Prime (on tv not Shield unfortunately).
Since this thread is supposed to be about the USB Hub I'll mention that today I noticed while using adoptable storage and inserting a USB Card reader with another microsdxc in it that the system didn't recognize it until restarting the unit. USB 3.0 drive though would show up instantly and luckily VLC player reads it very nicely and easily.
copticwalad said:
My bad for not seeing this until now, and actually perhaps it's a good thing I just saw this because I finally got to try out a true 4K movie over plex and compared it to locally on Nvidia Shield vs USB on 4K TV (Samsung SUHD). I'm gonna talk a little bit about HDR and 4k limitations so far and maybe adoptable storage experience.
Click to expand...
Click to collapse
You're a testing champ boss! I hope you take one for the team and don't ever get a girlfriend or married. :fingers-crossed:
I have a crap load of scenarios to work out when I get home this weekend on my Pro...after I first enjoy a candle-light dinner with my wife and pass a couple of glasses of wine through her and to bed.
PS are you also using something like the SiliconDust HomerRunHD TV tuner for Live Channels or with Plex DVR?
@copticwalad
Is your adoptable storage insert via a USB hub?
Meaning
Shield TV > USB hub > adoptable storage.
My drive is formatted by STV already
I was thinking of adding a USB hub in-between it and the device.
Would it work?
makapav said:
You're a testing champ boss! I hope you take one for the team and don't ever get a girlfriend or married. :fingers-crossed:
I have a crap load of scenarios to work out when I get home this weekend on my Pro...after I first enjoy a candle-light dinner with my wife and pass a couple of glasses of wine through her and to bed.
PS are you also using something like the SiliconDust HomerRunHD TV tuner for Live Channels or with Plex DVR?
Click to expand...
Click to collapse
Not yet but I'm planning on it in a few months whenever I get around to wiring cat6 and coax through my house. Hard to justify cost of strong antenna+homerun when all our family watches on OTA is the news and sometimes major sports like superbowl and nba finals etc.. That might change if rumored products of Antenna Directly to Shield USB Live Channels+DVR comes at good price.
noobhero said:
@copticwalad
Is your adoptable storage insert via a USB hub?
Meaning
Shield TV > USB hub > adoptable storage.
My drive is formatted by STV already
I was thinking of adding a USB hub in-between it and the device.
Would it work?
Click to expand...
Click to collapse
I actually don't use my usb hub anymore, it was good to know it works but my adoptable storage is actually a 128GB Samsung Pro Plus microSDXC MB-MD128DA/AM with 95 Read/90 Write. It's been amazing for over 14 months and I can access it and the Internal Storage of the Shield even when it's in standby from my laptop as a Network drive, not needing to worry about speeds or power. We lucked out cause the 2017 Nvidia Shield 16gb versions don't have microsd card readers (500GB does).
To answer your question: If your drive is either a flash drive or usb powered 2.5" drive the hub should easily power it as long as you're not powering too many with usbpower alone. If it's a bigger 3.5" external hard drive then it will have power + usb and should work as well.
I have a question myself for anyone here. Has anyone used a 3.5" External Hard Drive with the Shield using Power+ USB 3.0 without usb hub. 24/7 with no issues with power or did you have to manually turn it on and off. In other words, does it go to standby power with the Shield while still powered externally? And also are you using it for local playback only or with plex server? I'm debating adding a wd red drive to the Shield for plex local playback instead of going with the costly route of a real NAS without the transcoding power and expandable storage.
Also in case anyone ever has an issue with a flash drive not being seen by the Nvidia Shield, remove ES File Explorer. It very awkwardly prevent my Shield (running Nougat) from seeing or opening a flash drive even in Nvidia's settings. I uninstalled it and it works perfectly now through MX Player. I prefer Solid Explorer as File Manager, even on Android tv, worth the cost.
So I bought a thermaltake external HDD dock for about $40. It's USB 3.0 and I'm running my Plex Server out of it. It's 6TB drive. It's self powered and does not sleep. I was hoping that the Shield would recognize both drives at the same time but that didn't not work. I'm not routed and don't know if after I root it will recognize both drives at the same time.
Sent from my Nexus 6P using Tapatalk
wheels01 said:
So I bought a thermaltake external HDD dock for about $40. It's USB 3.0 and I'm running my Plex Server out of it. It's 6TB drive. It's self powered and does not sleep. I was hoping that the Shield would recognize both drives at the same time but that didn't not work. I'm not routed and don't know if after I root it will recognize both drives at the same time.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
copticwalad said:
I have a question myself for anyone here. Has anyone used a 3.5" External Hard Drive with the Shield using Power+ USB 3.0 without usb hub. 24/7 with no issues with power or did you have to manually turn it on and off. In other words, does it go to standby power with the Shield while still powered externally? And also are you using it for local playback only or with plex server? I'm debating adding a wd red drive to the Shield for plex local playback instead of going with the costly route of a real NAS without the transcoding power and expandable storage.
Also in case anyone ever has an issue with a flash drive not being seen by the Nvidia Shield, remove ES File Explorer. It very awkwardly prevent my Shield (running Nougat) from seeing or opening a flash drive even in Nvidia's settings. I uninstalled it and it works perfectly now through MX Player. I prefer Solid Explorer as File Manager, even on Android tv, worth the cost.
Click to expand...
Click to collapse
I'm glad I can give back a little to the community.
I hooked up a 6 terabyte external Western Digital hard drive which is powered on its own through an external power adapter. Next I hooked up another 2 terabyte external Seagate hard drive similarly powered externally. Since I am not as rich as I would like to be, they are both traditional 7200 RPM drives instead of SSD. They are both USB 3.0 and plugged into the internal USB ports of my Nvidia Shield Pro 2017.
My Nvidia Shield has no problem detecting both the drives and I use x-plore (https://goo.gl/UKuRRT) file manager to do operations between them.
Do larger Drive contains all my media for access my Plex and once again I have no problems accessing this media through Plex and playing it back locally or across the network in the house.
Recently I moved to 6 TB external drive into a USB 3.0 hub because I have to connect other devices to my Nvidia Shield Pro. This drive also contains all my Plex Media. I can confidently say that both these combinations of configurations for both the USB 3.0 drives work simultaneously and I'm able to move file to cross the drive and also use Plex against media stored on both of them.
got a 7 port usb hub and 7 Hard Drives Connected (8TB, 5TB, 3TB, 2TB, 750GB, 2 500GBs on one 2 Bay Enclosure) to the Shield using it and no issues on the local network or the Shield all files are accessible and blazing fast ) I recommend the
TP-Link UH720 for best performance.
Sent from my SM-G955U using XDA-Developers Legacy app
I have a Shield TV 16GB 2017, rooted, and have a 4 port usb (non-powered) hub connected to the first usb port (next to hdmi port). On this hub I have a flash drive as adopted storage and a 8TB hdd as external storage.
My problem or annoyance is the hdd can't be seen when accessing from PC sometimes even when shield is awake although I can see adopted flash and browse it. I usually have to reboot to see it.
friend.evil you have 7 hdd's on a usb hub are they accessible all the time even when shield is asleep?
Do I need to move my hub to the 2nd usb port and put the adopted in the 1st port.
Thanks. Any help is appreciated.
Nvidia Shield w/ a USB 3.0 Hub and 6 USB Drives ?
Last post above was someone that had 7 drives working... will this work in 2019 as it prolly has a new OS ? My last box (chromePC) with kodi 15.X worked using 5 drives... I tried a Zidoo box and only 4 USB drives work so im thinking of getting the Nvidia box as Ive got 5 FULL 8TB drives and need to add a 6th ! but wanna make sure before I get a shield as its costly... thanks in advance
HDD DONT MOUNT
I connected my 350GB EXTERNAL HD formatted in FAT32, but it does not recognize in multimedia.
My Settings:
RK3066
MCU: KLD.2.78V
FIRMWARE: MALASKY LAST UPDATE
ROOT: YES
If I connect the 4GB pendrive it works normal, when connecting external HD, it only lights up but does nothing on the android.
I installed MountStikc (app) and it did not work, could someone tell me what the problem is?
Which usb port are you using, and is it 3.5" or 2.5"?
Most likely the USB port on the head unit doesn't supply enough power to the hard drive...even if the light comes on it may not be able to spin up.
Andromeda_Station said:
Most likely the USB port on the head unit doesn't supply enough power to the hard drive...even if the light comes on it may not be able to spin up.
Click to expand...
Click to collapse
Exactly my thought. My 500GB 2.5" can only go in the front port, the rear one does not give it enough juice. Although, I am getting delivered a 12v to 5v/usb step down transfomer, coupled with a USB power booster 'Y' cable. I am hoping it will allow me to stick the HDD in the back. I hate it sticking out the front.