Related
I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?
I am running CleanGB MTD. The first time I tried to install it I had a bad download & needed to redo it from scratch. I used the Samsung EB13 Windows Installer utility to restore my phone back to stock & had no problems at all. It was up & running on MTD just had a few errors that I did not have time to fix that morning & I ran it for a few days after restoring with the utility, rooting, & restoring my backup. But now I'm enjoying the MTD goodness.....
Can you get back into download mode?
If so I would get a different USB cable & try running the installer again.
endurance1 said:
I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?
Click to expand...
Click to collapse
from what ive been reading on the threads, i believe you can just odin back, and back sure you have reboot and re-partition checked marked.
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Glad you got it working. I wasn't sure if the Samsung utility repartitioned...now I know...thanks.
Sent from my SPH-D700 using XDA App
endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Good to hear!!
Glad you got it fixed......
thanks guys. Yeah ive been using that sammy file since ec05 came out. this is the 3rd brick maybe 4th it got me out of. it works for EVERYTHING. better than odin.
Wow, I didn't know this exe thing existed. Odin has NOT been working on my home PC for tje past few weeks(months?) and that has kept me from trying anything that would require Odin to recover from, i.e. mtd.
Glad I read here in the Q&A pretty regularly. Most of the time I'm seeing if there's anyone I can help, but times like this I end up learning new things.
sent from my secret underground bunker
That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George
ghmacdonald said:
That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George
Click to expand...
Click to collapse
I am at work so I cannot post the file I have, but I put the file name in & searched in Google & several download options popped up.
Google Search: Epic4G_FroyoUpgrade_EB13.exe
Check it out & let me know if you need me to post a copy of the file, I saw several already on services like multiupload in the search.
Look at the thread stickied in development. The Samsung tool won't work all the time.
-Marcusant via Tapatalk
So my friend gave me his phone to see if I could fix it. It loops in CWM and won't get out of it and I can't connect with odin to it. (My phone connects just fine.) This is the only other thing I can think of. Anyone else got other ideas?
---------- Post added at 01:25 PM ---------- Previous post was at 01:08 PM ----------
Well tried it and phone still not discovered by the PC. I am at a loss at what to do. I know my friend tried to install some type of rom to it and didn't make a backup. It boots in to CWM non-stop and I can flash zips but it never leaves that loop even after the flashes. I can boot into Download mode but the phone won't be recognized. Tried both Odin and this. The phone is getting charged through the cable though which confuses me even more. Any help?!
Anyone have any ideas?! I am at a loss at what to do!
KillerFu said:
Anyone have any ideas?! I am at a loss at what to do!
Click to expand...
Click to collapse
Use a different cable with odin... it may be charging it but its not getting a data connection... also put into download mode and plug in usb... then "jiggle" the cord until it recognizes it...
Sent from my SPH-D700 using Tapatalk
Uninstall and reinstall the drivers. Then also try Odin with the battery and phone plugged in. Make sure you use a better cable than stock.
*First of all, let me say that this is a repost from here (http://forum.xda-developers.com/showthread.php?t=1153310&page=27), and I apologize for that fact. I have been severely neglecting food and sleep trying to fix my phone, and I really, really didn't feel like typing the whole damned story up again. Any assistance or insight would be deeply appreciated...
-------------------------------------------------------------------------------
Well, I did it this time I think. I've hacked, modded, wiped, and flashed my phone since I got it last year, and although I've gotten to places where I thought I had totally fuxored things up beyond recovery, every single time in the past I've been able to bring it back from the brink of oblivion. I am exceedingly resourceful and tenacious, which can be both a good and bad thing. Good thing when I am able to fix things that seem unfixable. Bad when I forget about things like eating or sleeping.
Here's the present situation: 4 days ago I was trying to flash a new modem (FB15)(something I know well how to do as I've done it many, many times before) through Odin, when it stalled out near the beginning of the process. This is not unusual with Odin, so I've gotten into the habit of closing it, pulling the battery, and starting again. This time, however, no matter what I've tried, I cannot get Odin to successfully flash. It fails every single time. Either that or it stalls yet again.
At the moment I can only get into 2 modes on my phone: download mode (which can't actually download anything apparently) and the very unpleasant computer--!--phone screen when I try to boot it up or go into recovery. This is the longest my phone has been unusable. I've been intensely focused on fixing it since it was semi-bricked. The ridiculously frustrating and annoying thing is that the computer I'm using (and I've used multiple to try to fix this across Windows, Linux, and Mac) usually says "USB device not recognized" when I plug my phone in while in download mode, no matter the state of the drivers, and when it does recognize it and it is visible in Odin, it means nothing because Odin fails no matter what file I'm trying to flash. When the computer and Odin DO recognize the phone, and when Odin doesn't hang, very occasionally it will give me some odd error message like "PIT mapping not found" or "cannot open COM port". I've tried so many of the things I've tried in the past that have worked: changing USB ports, rebooting the computer between attempts, uninstalling and reinstalling drivers, going into download mode with the SD-card and battery out and in, loading Odin after or before putting the phone into download mode, trying on different computers with different versions of Windows (I even tried one Mac with iOS 10.4 and a Linux notebook with Ubuntu), trying different USB cables, flashing with the battery and SD card out, trying to flash different files (besides the original modem.bin which stalled), running Odin as administrator, yadda, yadda, yadda...on and on, for days. I even just went out and bought a high-performance, super-short USB cable (6-inches) and a USB 3.0 PCI card so I'd have dedicated USB. Nada.
Basically my phone seems to have a broken download mode with potentially wonky USB (Samsung USB has never been good). I've been seeing if I can get Heimdall to work, though there is a bit of a learning curve with that program, no matter how easy people say it is. I've never even tried flashing it with it yet since I haven't gotten together all of the apparently necessary files. I also just found One-Click Unbrick, and while I was excited originally, it seems that the same outcome is the result. No matter what I do to get everything just right to be able to succeed, it fails. Java is installed, Heimdall is apparently installed, and the One-Click Unbrick drivers have been installed every time I've tried to run it. Nada again.
If my phone is able to get into download mode, yet that seems to be borked, what is my recourse? I'm at the end of my rope...*sinks into a depressed lump on the floor*.
ANY assistance would be immensely appreciated. Thank you all in advance. I'm not incredibly hopeful at this point, but I am (fortunately or unfortunately) still tenacious as hell. :-/
Setup:
Phone: Samsung Epic 4g
ROM: SleeperROM 2.0.04 EL30/MTD (Gingerbread 2.3.6)
Kernel: The last available Samurai kernel
Recovery: ClockworkMod Recovery 5.0.2.7
Filemap/Filesystem: MTD/Yaffs2
Present Computer: Windows Vista Home Premium 32-bit/AMD desktop
Modes available on phone: download and computer--!--phone screens
Issue: cannot flash anything in download mode via Odin on present computer
Wow im glad i didnt have to go through this i was trying to flash the fb15 modem recently as well and it wouldnt go through all i did was go and find the el30modem tar and flashed that and i was all good again. ... youve tried literally every suggestion i was going to say. other than try flashing the el30modem.tar? I know for sure its good its in android development if you can get odin to COM im sure it will work...
http://forum.xda-developers.com/showthread.php?t=1501424
add me on gtalk
crystylizd[email protected] and ill see if i cant help you out.
Big Goron said:
Wow im glad i didnt have to go through this i was trying to flash the fb15 modem recently as well and it wouldnt go through all i did was go and find the el30modem tar and flashed that and i was all good again. ... youve tried literally every suggestion i was going to say. other than try flashing the el30modem.tar? I know for sure its good its in android development if you can get odin to COM im sure it will work...
http://forum.xda-developers.com/showthread.php?t=1501424
add me on gtalk
[email protected] and ill see if i cant help you out.
Click to expand...
Click to collapse
I thank you much for your suggestion. I've tried flashing the EC05 modem tar and both the tar.md5 and the straight tar file of the stock EL ROM, though surprisingly I haven't tried the straight EL30 modem tar yet. I'll try when I get home. The main problem is not getting Odin to COM, but getting it to flash anything. It either stalls, fails, or doesn't see the phone...download mode seems to be basically useless.
homam_france said:
@+Que ppc really your BA downgrade and upgrade is long story,did u finish it?i hope the answer is yes,about the hexaguns we cannot return back to it,but i can make modification to the new components of the new build,capish
Click to expand...
Click to collapse
If you get it to recognize still then Odin with the battery and sd card out.
Sent from my SPH-D700 using xda premium
kennyglass123 said:
If you get it to recognize still then Odin with the battery and sd card out.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I usually flash in Odin with the battery and SD card out. No go.
tydynrain said:
I usually flash in Odin with the battery and SD card out. No go.
Click to expand...
Click to collapse
It is possible you have some crap in your phone's port. Or even the new cable is flaky. Get a bright light and magnifying glass and look in your phone's port. Also try fresh downloads of the files.
Sent from my SPH-D700 using xda premium
kennyglass123 said:
It is possible you have some crap in your phone's port. Or even the new cable is flaky. Get a bright light and magnifying glass and look in your phone's port. Also try fresh downloads of the files.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
I'l check the USB/charging port when I get home from work. Most of the files I've used, including the various versions of Odin, came from my synched Dropbox folder. I'm wondering now if Dropbox synches files accurately. I'll try redownloading every file I use to flash to see if it has a beneficial effect. Thanks for the suggestion.
hope this helps
tydynrain said:
I'l check the USB/charging port when I get home from work. Most of the files I've used, including the various versions of Odin, came from my synched Dropbox folder. I'm wondering now if Dropbox synches files accurately. I'll try redownloading every file I use to flash to see if it has a beneficial effect. Thanks for the suggestion.
Click to expand...
Click to collapse
Let me find you some reliable files
Odin 1.85
Stock El30
Windows 32 bit and 64bit drivers
This should be enough to get you on your way. Oh and if you can at all possible reinstall windows prior to loading these drivers. i know someone who had to do it before their computer would recognize their phone. I've been in this kind of situation i had someone root my phone and is computer was fubar'd and it took him 3 days to unbrick my phone. This is what helped him he kept recieving unknown device. This is what helped is what helped him id advice the same. Once you have windows reinstalled download the three things and install the drivers and give it a shot.
Big Goron said:
Let me find you some reliable files
Odin 1.85
Stock El30
Windows 32 bit and 64bit drivers
This should be enough to get you on your way. Oh and if you can at all possible reinstall windows prior to loading these drivers. i know someone who had to do it before their computer would recognize their phone. I've been in this kind of situation i had someone root my phone and is computer was fubar'd and it took him 3 days to unbrick my phone. This is what helped him he kept recieving unknown device. This is what helped is what helped him id advice the same. Once you have windows reinstalled download the three things and install the drivers and give it a shot.
Click to expand...
Click to collapse
Thank you so much for the time. I'll see about reinstalling Windows, though since it's not my computer I'm not too sure how that will go...hehe. I may be able to restore from the backup partition if he doesn't have a CD.
well you can do it over a virtual machine but unsure how to do this and if this will work entirely it might it might not im not too fluent with virtual machines.. but it simulates a working computer so id imagine you can install drivers and see if it will then recognize your phone.
Big Goron said:
well you can do it over a virtual machine but unsure how to do this and if this will work entirely it might it might not im not too fluent with virtual machines.. but it simulates a working computer so id imagine you can install drivers and see if it will then recognize your phone.
Click to expand...
Click to collapse
So interesting that you mention running a virtual machine, as since I can't reinstall Windows Vista on this system, I was considering partitioning the hard drive and installing a version of Linux, then running WINE under that.
Lol try that... or windows i think windows might be your best bet...
Sent from my SPH-D700 using xda premium
Whoa whoa, tdy...queston. have u manually installed ur driers directly from samsung website?
Sent from my SPH-D700 using xda premium
Kies drivers worked for me
Sent from my SPH-D700 on CM9 beta0 using xda premium
I FIXED IT! My phone which has been dead for 5 days lives again! Resurrected!
I thank you all for your time and assistance. It was very deeply appreciated.
I fixed it by circumventing Winblows entirely. I created a second partition on my friend's hard drive, installed Ubuntu Linux 11.10, then went through the pretty simple process of setting up Android SDK/ADB and Heimdall, and all of the dependencies that they required. The ridiculous thing is that I fixed it without even trying. I was simply seeing if Heimdall could detect my phone (which I had connected and in DL mode), which I noticed that it did. I had no idea what Download PIT did, so I pressed it, and lo and behold, it did something amazing, and rebooted my phone. I am elated, exhausted, triumphant!
WHOOT!!!
I kNEW I would figure it out. I always do...lol.
In messing up my phone so many times, I have gotten VERY good at fixing whatever nonsense happens to arise.
Thanks again all.
Tydyn.
EDIT: I meant PRINT PIT, not Download PIT. ;-)
YAY!
tydynrain said:
I FIXED IT! My phone which has been dead for 5 days lives again! Resurrected!
I thank you all for your time and assistance. It was very deeply appreciated.
I fixed it by circumventing Winblows entirely. I created a second partition on my friend's hard drive, installed Ubuntu Linux 11.10, then went through the pretty simple process of setting up Android SDK/ADB and Heimdall, and all of the dependencies that they required. The ridiculous thing is that I fixed it without even trying. I was simply seeing if Heimdall could detect my phone (which I had connected and in DL mode), which I noticed that it did. I had no idea what Download PIT did, so I pressed it, and lo and behold, it did something amazing, and rebooted my phone. I am elated, exhausted, triumphant!
WHOOT!!!
I kNEW I would figure it out. I always do...lol.
In messing up my phone so many times, I have gotten VERY good at fixing whatever nonsense happens to arise.
Thanks again all.
Tydyn.
Click to expand...
Click to collapse
CONGRATS im happy you got your phone back i know how you feel finally getting your phone back i went through the same deal cept it was with someone else. Oh and im jealous you have 11.10 working i couldnt get it working right with my laptop gpu drivers.. fail. anyways glad you got it
Big Goron said:
CONGRATS im happy you got your phone back i know how you feel finally getting your phone back i went through the same deal cept it was with someone else. Oh and im jealous you have 11.10 working i couldnt get it working right with my laptop gpu drivers.. fail. anyways glad you got it
Click to expand...
Click to collapse
Thank you brother! I am practically jumping around the house singing...lol. Ubuntu 11.10 is freaking gorgeous! It is the most amazing operating system I have ever used. I am in love!
tydynrain said:
Thank you brother! I am practically jumping around the house singing...lol. Ubuntu 11.10 is freaking gorgeous! It is the most amazing operating system I have ever used. I am in love!
Click to expand...
Click to collapse
Yeah i love it as well im sadly stuck with 10.04 which isnt bad but i like the newest ones UI its just so much more appealing than 10.04 but 11.10 doesnt like my GPU and is incompatible i do know a work around but have already got settled in 10.04
Big Goron said:
Yeah i love it as well im sadly stuck with 10.04 which isnt bad but i like the newest ones UI its just so much more appealing than 10.04 but 11.10 doesnt like my GPU and is incompatible i do know a work around but have already got settled in 10.04
Click to expand...
Click to collapse
My housemate is running 10.04, so I'm familiar with how it looks. If it makes ya feel any better 11.10 doesn't like my new usb wireless network adapter (Netgear N900 Dual Band), which is MUCH better than the one to which I had to revert to get internet access, though I'm hoping that I can get it working somehow soon.
tydynrain said:
My housemate is running 10.04, so I'm familiar with how it looks. If it makes ya feel any better 11.10 doesn't like my new usb wireless network adapter (Netgear N900 Dual Band), which is MUCH better than the one to which I had to revert to get internet access, though I'm hoping that I can get it working somehow soon.
Click to expand...
Click to collapse
I had alot of trouble even getting internet to comply... i finally got it to speed up using wifi and even that was a pain in the arse luckily other people had my same issue and had a resolution for it. I know you have to have the drivers for said wireless adapter installed for it to work correctly otherwise its not going to work
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
jconway1968 said:
I just inherited a t-mobile phone that was rooted. I installed the latest version of TWRP and tried to re-root it but now it's in a boot loop and on top of that I can't connect the phone to a computer b/c I get the "USB Device Not Recognized" message. I've re-installed the drivers and I've tried the toothpick trick. Nothing is working. What are my options?
Click to expand...
Click to collapse
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
bmg002 said:
First wrong section...second I'd say flash a different Rom/kernel pair... or redo your recovery from Odin
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
If you flashed TWRP 2.6.3, that's your problem.
Flash 2.6.1
This is the wrong section because it has nothing to do with ROM development.
With that being said if you can still boot into twrp you still have hope. Try loading a different ROM into an SD card using a converter and slide back in the phone to properly wipe first then re flash.
I don't understand why you can't get a proper USB connection going but above suggestion may solve it.
Sent from my SGH-T989 using xda app-developers app
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
jconway1968 said:
First, I believe this is the correct section - the phone I am working with is a T-Mobile Galaxy S II... Second, I can't Odin because I don't have a working usb connection. I've tried several different ROMS from this fine section and I get the same result... Boot Loop
Click to expand...
Click to collapse
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
bmg002 said:
Just to confirm a few things: where do you not have the working USB connection? in download mode? If so, I'd try reinstalling the drivers.
Also, I see in your sig that you state your phones are:
Asus Nexus 7
Sprint Galaxy Note 2
Neither of which is a SGH-T989. Are you sure you are flashing the correct ROM/Kernel for your device?
also you said it came rooted but you re-rooted it. What process did you use to re-root it?
One last thing: you say you got it second hand, are you sure it is a T-Mobile galaxy S 2? May want to check under the battery for a "T989" or "i9100". The i9100 is NOT a T-Mobile galaxy S 2. It should be SGH-T989 if they didn't give you incorect info about the phone.
You could also try a different USB cable or hub. I've had USB extension cables give me grief and the front ports on my PC don't like my phone.
Click to expand...
Click to collapse
Thanks for your help. Here are the answers to your questions:
I think there is something wrong with the micro USB input on the phone. I have reinstalled the drivers several times. I have tried different cables and different computers. I even tried the toothpick trick. No luck.
I do have a GN2. The SG2 is for my daughter...
It is a genuine SGH-T989 I checked under the battery.
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
jconway1968 said:
Where do I find and how do I put a flashable twrp 2.6.1.0 on my micro sd card? I've always used goomanager in the past but obviously that won't work in this case...
Click to expand...
Click to collapse
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
soupysoup said:
You could always get a SD card reader, connect t to ur PC, DL a flashable twrp 2.6.1.0 and flash the recovery, then flash a ROM an u should be back in action, but above mentioned is right this is the wrong forum u need q&a
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
jconway1968 said:
One more piece of information that might be helpful... When I try to wipe the cache I get this message "Formatting Data using make_ext4fs function" and it stays stuck there. I've left it for over 30 minutes and it doesn't ever move from that screen. Hope that helps... I really need some help here.
Click to expand...
Click to collapse
In twrp settings change it to use rm instead of formatting
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
jconway1968 said:
Everything I've found requires a computer connection. I need to be able to flash it back from v2.6.3.1 using TWRP to do it. Is that possible?
Click to expand...
Click to collapse
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
soupysoup said:
If u go to the dev section on this phone and look around a bit, u will find the twrp thread, in that thread is a flashabke copy of 2.6.1.0, if u can't find it pm me, I have a copy, all u would need to do is put the zip file on any micro SD card then put it in the phone and flash it with the twrp u have now, it will revert it back to 2.6.1.0 and that should fix ur prob, but like I said of u can't find it pm me and I'll shoot u a copy
Sent from my -T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
jconway1968 said:
Ok so I Flashed it and now it's stuck on the Blue Teamwin screen???
Click to expand...
Click to collapse
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
bmg002 said:
Let it sit on the TeamWin screen for a minute or so... I find it sometimes takes a little bit.
If it doesn't ever get past there, try hooking it up to a PC and see if you can get ADB to load (presuming you have ADB installed and ADB drivers installed). If you can, try to do an "adb pull /proc/last_kmsg" and a "adb logcat > logcat.txt" and zip those up and toss them on here.
If you CAN'T get into adb, I would try hooking the phone up to Kies and see if it will do anything for you.
Or you could try following this guide as you have the T-Mobile SGH-T989 (not the Telus SGH-T989D):
http://forum.xda-developers.com/showthread.php?t=1513359
BUT make sure to grab the correct stock image file for whatever version your android currently is (ie if you are on Android 2.3.6, then make sure to get the T-mobile KL1 2.3.6 stock image).
Also, what ROM did you flash? was it a 4.3 ROM? If so, did you update your radio before you flashed the ROM? I think 4.1+ needs the updated radio to function properly.
I know you said you can't connect through ODIN, but I'm hoping it is because of some odd driver or odd ODIN version. That thread has the stuff to make it all work I believe.
I'm really hoping you can get ADB to work. If you can pull a logcat of your bootup process, it will be much easier to figure out what went wrong.
Click to expand...
Click to collapse
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
jconway1968 said:
You guys are great!!! I really appreciate all the help. No matter what I do, ADB, Kies, different cables, different computers, nothing gets past the "USB Device Not Recognized" pop up. I let it sit for 15 minutes, twice. Still no love... I loaded TWRP_2.6.1.0_Hercules and then reboot and that's when it got stuck. Prior to that I had loaded TMobileT989UVMC6RootedDeodexed Rom. I forget where I got it. I'm pretty sure it was a 4.1.2 based rom.
Click to expand...
Click to collapse
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
bmg002 said:
weird... I am not sure why it is being so fussy with your phone.
Hopefully somebody has a better suggestion than I do, but my next thought is to try ebay-ing the phone in hopes that somebody gives you a few bucks for it. It sounds to me like the internal memory module is dying and the USB port is shot.
Is your water damage sticker pink/red or missing? It should be under the battery.
I hate thinking that the phone is just dead, but without being able to connect it to the PC in either recovery or download mode and not being able to boot into a ROM or recovery, I think the next step is to scrap it and hope somebody can send you a few bucks... or if you have experience soldering, maybe try replacing the USB connector?
I could be wrong mind you... The only time I had issues like that it was due to a badly flashed recovery and I needed to use ODIN to get back up and running. As a thought, do you have a Windows XP 32-bit computer you could try plugging the phone into? And while the phone is plugged in, can you check device manager for all devices? maybe try installing the drivers manually? I suggest windows XP 32bit because that is what I use the majority of the time with my phone. I've also used Windows 7 64-bit and it worked.
Click to expand...
Click to collapse
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
jconway1968 said:
Thanks again for your time and suggestions... I've always been very impressed with the xda community. I actually got this phone, used, from Swappa. And I am in the process of returning it for a refund. But the seller is being difficult and is trying to stick me with the phone. I was just trying to salvage it on my own, just in case... Thanks again.
Click to expand...
Click to collapse
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
bmg002 said:
that sucks. I've heard good things about Swappa, but living in Canada I can't use it. My opinion it sounds like you got a dud and based on how hard the guy is fighting to not give you a refund, I wouldn't be surprised if he knew it was doa and just fluked out and get it running before he sold it. Or maybe it got water damaged and he knew it would fail soon so he sold it before it completely quit.
I hope you get it all sorted out.
Good luck and sorry I couldn't be more helpful.
Click to expand...
Click to collapse
You were great!!! Thanks again...
Hi,
I have rooted by Note 2 N7100 in the past using the ODIN tool and CWM. But I had issues with some apps that were being closed at random etc. So I got tired and unrooted. But now I wanted to root it again using the ODIN. But ODIN is not able to detect my phone at all.
Please someone help me. Now that my note 2 got the 4.3, it is bloated with all kinds of crap from Samsung. I need to root to remove all the crap.
Thanks n Regards,
Harsha Puttagunta
puttagunta_h said:
Hi,
I have rooted by Note 2 N7100 in the past using the ODIN tool and CWM. But I had issues with some apps that were being closed at random etc. So I got tired and unrooted. But now I wanted to root it again using the ODIN. But ODIN is not able to detect my phone at all.
Please someone help me. Now that my note 2 got the 4.3, it is bloated with all kinds of crap from Samsung. I need to root to remove all the crap.
Thanks n Regards,
Harsha Puttagunta
Click to expand...
Click to collapse
Remove samsung usb drivers and reinstall them,that might work
Doesn't Help
singhpratik87 said:
Remove samsung usb drivers and reinstall them,that might work
Click to expand...
Click to collapse
Naa... this is a new laptop. So all new. still deleted the drivers and reinstalled. No luck.
puttagunta_h said:
Naa... this is a new laptop. So all new. still deleted the drivers and reinstalled. No luck.
Click to expand...
Click to collapse
i did google this issue and people have come up with various possibilities what could be wrong right from faulty usb cable to re installing drivers to factory resetting their device 3x for ODIN to be able to detect their device, i am a newbie too at these things so i am not really sure what could possibly be stopping from ODIN detecting your phone but i'll be on the look out and see if i can refer to you a solution if you haven't solved it already but if you do fix it somehow please post what exactly you did to make it work so it could help future users in case they run into the same issue.
EDIT: follow this word to word ,might work for you,let me know http://forum.xda-developers.com/showpost.php?p=34625034&postcount=7
Crazy
singhpratik87 said:
i did google this issue and people have come up with various possibilities what could be wrong right from faulty usb cable to re installing drivers to factory resetting their device 3x for ODIN to be able to detect their device, i am a newbie too at these things so i am not really sure what could possibly be stopping from ODIN detecting your phone but i'll be on the look out and see if i can refer to you a solution if you haven't solved it already but if you do fix it somehow please post what exactly you did to make it work so it could help future users in case they run into the same issue
Click to expand...
Click to collapse
It can't be the issue with the cable as I am able to use the cable for other things like backups and moving data from phone to PC etc. The issue with the Factory reset is that i dont have a spare phone at the moment. So if this device screws i am dead without a mobile to use.
Let me search some more and if I can find a solution i will post it here. Else I am going for the Cyanogenmod installer. I am tired of this.
puttagunta_h said:
It can't be the issue with the cable as I am able to use the cable for other things like backups and moving data from phone to PC etc. The issue with the Factory reset is that i dont have a spare phone at the moment. So if this device screws i am dead without a mobile to use.
Let me search some more and if I can find a solution i will post it here. Else I am going for the Cyanogenmod installer. I am tired of this.
Click to expand...
Click to collapse
Alright goodluck dude,hope you can fix it
Hey guys, I have a Samsung Galaxy S3 for Tmobile SGH T999 and I had cyanogen on it until it crapped out and got hard bricked. AFter following these links, http://forum.xda-developers.com/showthread.php?t=1949687 and http://forum.xda-developers.com/showthread.php?t=2439367, I was able to unbrick my phone and get into boot recovery mode. However, when i try to flash the stock firmware in odin, I get an error (the error is shown in the attachment). Can anyone please help me? Sorry if im posting something wrong, I am new to this forum. Thank you!
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
DocHoliday77 said:
After booting into download mode, take out the sdcard before flashing with Odin. Also if kies is on the computer, uninstall it.
Click to expand...
Click to collapse
I tried this still doesnt work.
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
DocHoliday77 said:
You said there was an error msg, but im not seeing it in the screenshot.
How exactly did you brick it though? Have you tried flashing MJC or NC2 firmware from Odin?
If you are still running MD5 or earlier, you could try flashing TWRP, then boot recovery and flash the recovery firmware package in the development section.
Click to expand...
Click to collapse
Sorry i meant failure not error. I bricked it because my cyanogenmod was having problems and i tried to restore it, after i did it completely bricked. Sorry can you please elaborate what is TWRP, MJC or NC2 firmware, im dont have much knowledge about these kind of things. Thank you so much for helping me, it means alot to me and I will do my best to follow your directions.
Ok, ill explain better when I get to my computer. It'll be too much to try to type on this tiny device im using right now!
But for now, TWRP is a custom recovery, like CWM. You use it when flashing roms like CM.
MJC and NC2 are just the different firmware builds you can flash in Odin. We shorthand it by just using the last 3 letters of the build version. T999UVUENC2 is what im referring to when I say NC2.
Take a look at my firmware thread. Its stickied at the top of development. Linked in my sig too.
Let me know if this helps your understanding at all. Ill explain more in what to do shortly.
Thanks for that, it gave me a better understanding. I tried to install flash and this happens when i try to flash twrp or MJC on odin
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
DocHoliday77 said:
Ahhh! PIT=Partition Information Table
Odin uses this to know the partition layout of the device so it knows where to flash each part of the firmware. It usually gets this directly from the device, but occasionally it becomes corrupted or lost.
There is a thread in the General section that has all our PIT files. Should be on the first page right now, maybe second. Download the correct one for your device. (My last post has a link to my repo with all PIT files)
Now try flashing your firmware again, do everything the same way, but this time check the repartition checkbox, and click the PIT button and select the .pit file you just downloaded. Now click start and it should work. We hope....!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
ojhasha said:
http://forum.xda-developers.com/showthread.php?t=1848267 are you talking about this page for the PIT file? because when i clicked this link it doesnt work and it pops up as an unsafe page on my myWOT.
Click to expand...
Click to collapse
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
ojhasha said:
Ok so i found a PIT file for my phone and when i tried to flash with the odin v3.07 it got stuck on Leave CS. I looked up a solution for this and it was to use an older version of odin, v1.85. After i tried this I made more progress but it failed again.
Click to expand...
Click to collapse
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
DocHoliday77 said:
Yes that's the thread. Which did it say was unsafe? The thread itself, or my link in the post in that thread?
If its my link, it just goes to my folder on http://androidfilehost.com. its a file sharing site solely for android stuff from sites like xda. Its perfectly safe. If that's the one being flagged its probably because it has files you can download m
Where did you get the pit? May be that its either a corrupt download or for the wrong device.
And did you try with Odin 3.09?
Click to expand...
Click to collapse
It was invisibleK's link that was unsafe. I used your 16GB Pit file in here, http://www.androidfilehost.com/?w=files&flid=6471 and i got the same result. I dont remember where i got the other pit. I got stuck on Leave CS on the odin 3.09 and when i click start it failed again with the repartition failed.
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
DocHoliday77 said:
You are still removing the sdcard before flashing, right?
I have no idea if this could help, but theres a program here on xda called PIT magic. Maybe take a look in that thread to see if you find anything useful.
You can try flashing the PIT only, no firmware selected, but I dont know if this would work or not.
Only other thing I can think of is to try everything over again with the NC2 firmware.
Try that first, but you can also try flashing cwm or TWRP with odin. If we can get recovery on there we might be able to try other stuff with that.
Click to expand...
Click to collapse
sorry i didnt respond in a while, I was really busy with homework. I tried what you said and still no sign of success. I brought my phone to a repair shop and they said the motherboard is damaged and it needs to be replaced for 150$. I hope this guy is just bull****ting me, can anyone confirm? I really hope there is still light at the end of the tunnel right now.
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
DocHoliday77 said:
Its hard to say. Motherboards do go bad, usually an issue with the memory. Its pretty rare, but it does happen, and the frequency has been increasing since these devices are starting to get a little old now.
But $150 for a replacement is, imo, a rip off. You can find used boards on ebay for under $100. If you csn use a screwdriver and can be gentle with the ribbon cables, its a super easy swap. Just check the videos to see.
Click to expand...
Click to collapse
do you recommend me doing it? or are there more alternatives.
If the memory itself has gone bad, that's your best option. It is possible to change just the memory chip, but the part is probably hard to find and it requires a higher level of soldering skills.
There's a video of this, if I can find it again ill post the link.
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
yellowonion said:
Here's the video to the emmc replacement for international S3, should be similar but will require BGA soldering skills. https://www.youtube.com/watch?v=rOYo9AcUQQI
I thought about attempting to do this for my T999v, but a EMMC chip is about 35-50 bucks.
Click to expand...
Click to collapse
did you have my symptoms? did you ever fix your phone? if so please share, i want to get my phone back in the cheapest way possible.
PS. I charged my phone today and the red led light showed up, that means my motherboard isnt broken right?
Not necessarily. It means there is a problem and requires special drivers and programs to fix, (or the debrick sd card). It basically just means the computer sees something is plugged in. If the memory has gone bad it could very well still give the red led and/or boot from the sd.
The only good way to verify the board (or memory) needs replacing would be to go to a second shop and ask them to attempt a jtag repair. If they tell you the same thing as the first shop, ask if they can be more specific about what happened when they attempted the jtag repair. At this point though, its a pretty good guess that the memory has gone bad.