Develop Bugs

I think i bricked my epic.

I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?

I am running CleanGB MTD. The first time I tried to install it I had a bad download & needed to redo it from scratch. I used the Samsung EB13 Windows Installer utility to restore my phone back to stock & had no problems at all. It was up & running on MTD just had a few errors that I did not have time to fix that morning & I ran it for a few days after restoring with the utility, rooting, & restoring my backup. But now I'm enjoying the MTD goodness.....
Can you get back into download mode?
If so I would get a different USB cable & try running the installer again.

endurance1 said:
I was angry at my current rom which was on MTD so i decided just to you the old samsung "phone flash utility" (Epic4G_FroyoUpgrade_EB13.exe) that was uploaded on their site like a year ago to go back to stock. well i think since the phone was MTD it didnt work and now its stock at the connect cable screen, is there anything i can do?
Click to expand...
Click to collapse
from what ive been reading on the threads, i believe you can just odin back, and back sure you have reboot and re-partition checked marked.

I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!

endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Glad you got it working. I wasn't sure if the Samsung utility repartitioned...now I know...thanks.
Sent from my SPH-D700 using XDA App

endurance1 said:
I found out what the problem was. I should have known this because this happened to me once before. I was using my front USB ports. Front ports on most pc's are only 1.0 and you need to use the back 2.0 ones to work. Most people think its cable issues but its usually just USB port. This samsung utility is a complete gem! screw odin. thanks for the response!!!
Click to expand...
Click to collapse
Good to hear!!
Glad you got it fixed......

thanks guys. Yeah ive been using that sammy file since ec05 came out. this is the 3rd brick maybe 4th it got me out of. it works for EVERYTHING. better than odin.

Wow, I didn't know this exe thing existed. Odin has NOT been working on my home PC for tje past few weeks(months?) and that has kept me from trying anything that would require Odin to recover from, i.e. mtd.
Glad I read here in the Q&A pretty regularly. Most of the time I'm seeing if there's anyone I can help, but times like this I end up learning new things.
sent from my secret underground bunker

That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George

ghmacdonald said:
That sounds like a great thing to have sitting on my computer. I tried to find it but was not successful. Can anyone point me to a copy of it.
Thanks
George
Click to expand...
Click to collapse
I am at work so I cannot post the file I have, but I put the file name in & searched in Google & several download options popped up.
Google Search: Epic4G_FroyoUpgrade_EB13.exe
Check it out & let me know if you need me to post a copy of the file, I saw several already on services like multiupload in the search.

Look at the thread stickied in development. The Samsung tool won't work all the time.
-Marcusant via Tapatalk

So my friend gave me his phone to see if I could fix it. It loops in CWM and won't get out of it and I can't connect with odin to it. (My phone connects just fine.) This is the only other thing I can think of. Anyone else got other ideas?
---------- Post added at 01:25 PM ---------- Previous post was at 01:08 PM ----------
Well tried it and phone still not discovered by the PC. I am at a loss at what to do. I know my friend tried to install some type of rom to it and didn't make a backup. It boots in to CWM non-stop and I can flash zips but it never leaves that loop even after the flashes. I can boot into Download mode but the phone won't be recognized. Tried both Odin and this. The phone is getting charged through the cable though which confuses me even more. Any help?!

Anyone have any ideas?! I am at a loss at what to do!

KillerFu said:
Anyone have any ideas?! I am at a loss at what to do!
Click to expand...
Click to collapse
Use a different cable with odin... it may be charging it but its not getting a data connection... also put into download mode and plug in usb... then "jiggle" the cord until it recognizes it...
Sent from my SPH-D700 using Tapatalk

Uninstall and reinstall the drivers. Then also try Odin with the battery and phone plugged in. Make sure you use a better cable than stock.

Hardware ID Missing after rooting......

Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?

Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..

I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?

don't use windows..

Ditto
dstenc said:
I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?
Click to expand...
Click to collapse
glen4cindy said:
Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?
Click to expand...
Click to collapse
I was able to gain root back using the toolkit. I flashed stock rom image I believe the ROM from the factory then flashed back stock recovery. Went back in after I updated and re-rooted to flash the triangle away. Now I need to unroot and after speaking with Sprint Rep on phone and trying a few things they advised me to take it to store to let them try it. I believe ALL of my problems started when I tried to use Mobile Odin Pro to flash the latest update to LJC (should I have been on stock recovery?). It started to flash then stopped and went into CWM recovery which is the recovery that the toolkit flashed. I for some strange reason was going to flash the update from there except I didn't have it in the right place on my sd card (couldn't access it GOD I'm a Dumbass!). God help me cause I'm too stupid to even understand what side loading is let alone how to do it. If some kind soul would take pity on me and pm me I could get a handle on the differences between HTC and Samsung. Anyway need to unroot now. Oh I keep seeing in the flash counter saying 1 but I'm on stock rom with stock kernel and stock recovery how do I get it to zero. Using triangle away. Anyway to check counter with stock recovery?
OH yeah does anyone keep getting "Internal Error Code 1500" in addition to the hardware id is missing?
Thanks to everyone that takes time to help idiots like me. I promise I CAN learn.
Charles

chrisc627 said:
Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..
Click to expand...
Click to collapse
Thank you...Unlike user: dstenc, the above procedure fixed my issue. As has been the case many times, XDA helpful users to the rescue!
:laugh: :good:

Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.

Could you walk me through your fix?
dstenc said:
Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.
Click to expand...
Click to collapse
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles

Could you walk me through your fix?
Mods please delete double post sorry

ceabbott2 said:
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles
Click to expand...
Click to collapse
I don't remember link. I googled so you might try that way.
Just FYI, even with older drivers I have sporadic Hardware ID Missing error, but far too less than with the latest version.

I'm posting this to keep it to the top of this board.
This is my second Note 2 in 2 weeks. I returned the first one because it stated Hardware ID missing, so within my first 2 weeks Sprint gave me a new one thinking that it was my phone. While at the Sprint store, and not yet rooted, we installed the unit and removed the unit 15 times to see if we could get it to have the Missing Hardware ID to pop up, it DIDN'T pop up once, so I thought I was good to go.
I came home and did the common root method that uses Galaxy Note 2 Toolbox. I IMMEDIATELY started getting the Missing Hardware ID again.
So now that we have it localized, what could be missing or creating a problem from the root procedure from the Galaxy Note Toolbox 2???
What I find really strange is that many are not experiencing this problem or they are just living with it.
I even tried the USB Switcher that appeared to install and does switch between Mass Storage and MTP, but although my PC makes the upward noise that sounds like it is installing and recognizing the USB Mass Storage, it doesn't end up recognizing it. It was ZATTA's build but he said it didn't work for his Galaxy 3 or Note 2 either.
Will anyone find a cure????
This will be no fun to have to deal with for the next 2 years.
Chime in PLEASE!!!!!! Even if it's only to insult me, I don't care if you have a cure.
Regards
Dave

if you do Google search, it's a known issue. From what I read, it's a driver issue. Some have had luck using the older Samsung USB drivers. You have downloand them, and install, and have your PC completely disconnected from the internet before plugging in your GN2 after the install. Appaarently the drivers on Microsoft's servers are bad; may be the wrong device.
I've done this, and still have the issue. I just find I don't have plug and unplug the USB cable as much.
What I have seen, the PC does connect to the GN2. It just doesn't recognize it as a storage device. It wants to use it as a modem, probably from the tethering capabilities with a USB OTG cable.
It may not be so much that it's not wide spread, but more that not everyone uses the GN2 as storage device or connects it their PC.

I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.

knightfox said:
I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.
Click to expand...
Click to collapse
Yep I think you may be on to something. Because when I rooted I tried both TWRP and CWM and then I had to go back to stock to get to apply the LJC update. Ever since I have had the chameleon error and Handsfree activation issues. Oh my counter always says 1 and I can't remove it with triangle away. I think it says custom binary yes and the counter says 1. I am using a laptop with Windows 7 and it now recognizes the device just can't stop the errors on start up.
Charles
Sent from my SPH-L900 using xda premium

Samsungs older drivers: uploaded.net/file/hdh0f1xd

[Q] Odin doesn't detect my N7100 in download mode!

Yes I done the research and didn't find a working solution.
My Note 2 experienced SDS and had the motherboard replaced under warranty by the Samsung service center. Before repairs there was no issue and I flashed a couple things with PC Odin. After getting my note back I intended to flash an international 4.1.2 version to get rid of the Arabic based ROM and to minimize the chance of another SDS. Upon checking found out I still have the insane chip.
Unfortunately when I connected my note to PC, Odin didn't recognize it. I tried:
another Odin version
reinstalling drivers
another USB cable
and quite a few other things i found in other threads
To make it more confusing there is no issue connecting the note in any other mode to the PC. I shows up in explorer as GT-N7100 and it connects to Kies without issues giving all the sync, backup etc...... options.
As a last resort I hope I missed something somewhere and maybe somebody can point out where........

MutantWizard said:
Yes I done the research and didn't find a working solution.
My Note 2 experienced SDS and had the motherboard replaced under warranty by the Samsung service center. Before repairs there was no issue and I flashed a couple things with PC Odin. After getting my note back I intended to flash an international 4.1.2 version to get rid of the Arabic based ROM and to minimize the chance of another SDS. Upon checking found out I still have the insane chip.
Unfortunately when I connected my note to PC, Odin didn't recognize it. I tried:
another Odin version
reinstalling drivers
another USB cable
and quite a few other things i found in other threads
To make it more confusing there is no issue connecting the note in any other mode to the PC. I shows up in explorer as GT-N7100 and it connects to Kies without issues giving all the sync, backup etc...... options.
As a last resort I hope I missed something somewhere and maybe somebody can point out where........
Click to expand...
Click to collapse
This may help..
http://forum.xda-developers.com/showthread.php?t=1687590
GT N7105 with XDA Premium......that is all......

bearusa said:
This may help..
http://forum.xda-developers.com/showthread.php?t=1687590
GT N7105 with XDA Premium......that is all......
Click to expand...
Click to collapse
Thanks mate, read a good portion of the thread and have to admit its way over my head so couldnt figure out how it relates but it did remind me of mskip's Toolkit. So I:
unisntalled Kies
uninstalled Samsung drivers
ran CC cleaner
ran registry cleaner
rebooted
Then I started from scratch with the Toolkit and got lucky. Rooted and twrp installed. Tonight or tomorrow will continue with the flashing a non-Arabic 4.1.2 ROM. Got to buy a beer for mskip!!!
SOLUTION
By the way just figured out something that in all the searching I have not seen anybody mention. I probably missed it! All this time I am following instructions to start Odin then boot the phone into download mode and then connect to PC and it still doesn't work even after I managed to do some flashing through the Toolkit. Then I had an idea. With note still in download mode and connected to the PC I shut down Odin and restarted it, guess what there is light and it's blue, it worked!!!

**SOLVED** Any/All ODIN flashes FAIL!

SOLVED: see post #5 & #8
I've been trying to root my T807T and everyone with one on the forums here has reported that all T805 stuff works just fine on it.
I have installed USB drivers, USB Debugging set to on. Been using Odin 3.07 as well as 3.09.
I tried multiple USB ports and two computers and a whole lot of different wires (including original ones).
I disabled my Anti-virus and do not have Kies installed.
I am not a newbie to flashing and have been rooting Samsungs since the first Galaxy S Vibrant all those years ago. I have never seen anything like this.
Everything I try to flash in Odin comes up with FAIL! after about halfway through flashing. I can restart my tablet and everything works fine, but this is making it impossible to root.
FAIL occurs right after "NAND Write"
Any/all help is very much appreciated. If anyone is NYC local and can give it a shot, that'd be great.
Thanks everyone.

I would suggest taking a look at this thread. http://forum.xda-developers.com/showthread.php?p=54393309
Install kies and reinstall drivers with kies probably would help?

DUHAsianSKILLZ said:
I would suggest taking a look at this thread. http://forum.xda-developers.com/showthread.php?p=54393309
Install kies and reinstall drivers with kies probably would help?
Click to expand...
Click to collapse
I've read that thread before, not the same issue. But thanks for the heads up nevertheless

postulio said:
I've read that thread before, not the same issue. But thanks for the heads up nevertheless
Click to expand...
Click to collapse
I would uninstall the drivers and try to install the drivers from kies. Other than that, Im not sure why it wouldnt work.

I have been digging a lot on the issue. Of course I haven't been able to find a whole lot other then it appears 95 percent of these nand write issues are with samsung devices. Make sure that in settings>general>security reactivation lock is OFF. Also try removing your SIM card and the SD card if you have one. Then proceed to flash. We have the exact same model, firmware, build, etc etc. I can't think of a logical reason why it won't work. I'd be inclined to believe it's a communication issue between tablet and computer at this point. Completely stumped on this one however I will keep digging for you.

DUHAsianSKILLZ said:
I would uninstall the drivers and try to install the drivers from kies. Other than that, Im not sure why it wouldnt work.
Click to expand...
Click to collapse
no go.

postulio said:
no go.
Click to expand...
Click to collapse
Does your tar have .md5 at the end of the filename? I think it should fail earlier if this is the problem but maybe its not being properly verified? Its just a shot in the dark but try removing the .md5 if its there and just flash the straight .tar file. Or retry download maybe you got a corrupt copy.
Sent from my Nexus 7 using XDA Free mobile app

Ripx88 said:
I have been digging a lot on the issue. Of course I haven't been able to find a whole lot other then it appears 95 percent of these nand write issues are with samsung devices. Make sure that in settings>general>security reactivation lock is OFF. Also try removing your SIM card and the SD card if you have one. Then proceed to flash. We have the exact same model, firmware, build, etc etc. I can't think of a logical reason why it won't work. I'd be inclined to believe it's a communication issue between tablet and computer at this point. Completely stumped on this one however I will keep digging for you.
Click to expand...
Click to collapse
HAHAHAHA BINGO!!!!
woooo!
cfautoroot: BAM! worked first try.
everybody dance.
Thank you very much for this genius tidbit. I must've enabled it the first day I got the tablet and forgot all about it as It's never been an option on any of my other devices.
Huge thanks to both of you guys for bending over backwards trying to find a solution as to why the flashing wasn't working. Now we know.
Pretty clever of Samsung to hide an Odin flash lockout switch within the actual OS (as opposed to recovery).

Unknown Device connection to pc

All I want to do is flash back to stock, I feel like I am gonna lose my my mind or go buy a new phone. I have mostly spent a solid 10 hours of time trying to get it to work.
I have been endlessly looking, searching, trying all these different methods to get my ls980 to connect to my pc. So basically everytime I have hooked it up it comes up as unreconized or unknown device doesn't connect.
List of things: Latest LG mobile drivers I have installed them through there exe and tried to install them manually when the ! comes up on the device. I have tried my laptop and my desktop every usb in all of them. I have tried the stock cable, and about 8 other different cables. I have tried it in debugging mode with mtp and without debugging. I tried the support tool as well. Tried composite usb setting.
I guess I am at a loss at this point to what even to try besides sending it to be repaired. Which I don't feel like it's a phone problem and I am just missing something I can't find, I say this because the phone charges perfectly fine and no damage to the usb port at all. If anyone has good information or just a direction I can go will be greatly appericated.

Dirty Grimace said:
All I want to do is flash back to stock, I feel like I am gonna lose my my mind or go buy a new phone. I have mostly spent a solid 10 hours of time trying to get it to work.
I have been endlessly looking, searching, trying all these different methods to get my ls980 to connect to my pc. So basically everytime I have hooked it up it comes up as unreconized or unknown device doesn't connect.
List of things: Latest LG mobile drivers I have installed them through there exe and tried to install them manually when the ! comes up on the device. I have tried my laptop and my desktop every usb in all of them. I have tried the stock cable, and about 8 other different cables. I have tried it in debugging mode with mtp and without debugging. I tried the support tool as well. Tried composite usb setting.
I guess I am at a loss at this point to what even to try besides sending it to be repaired. Which I don't feel like it's a phone problem and I am just missing something I can't find, I say this because the phone charges perfectly fine and no damage to the usb port at all. If anyone has good information or just a direction I can go will be greatly appericated.
Click to expand...
Click to collapse
Is your device functioning normally, besides from this? Also, did you use the T-mobile drivers?

tabp0le said:
Is your device functioning normally, besides from this? Also, did you use the T-mobile drivers?
Click to expand...
Click to collapse
It works just fine, only notable thing that I never figured out was why OTA updates don't ever take, it's still on ZVC. I tried the T-mobile d802 drivers as it was suggested by another post I saw on here.

And you've removed all drivers to android and lg for it.

secret.animal said:
And you've removed all drivers to android and lg for it.
Click to expand...
Click to collapse
Correct, I uninstalled them, tried new ones a couple different ways from other posts, and removed them and tried again. Right now I just have them all uninstalled. Trying to figure out if it's something that's stopping it. In error I did forget that a couple times it reconized it but would :fail to start code 10.

Which version of windows are you running? On both desktop and laptop???

secret.animal said:
Which version of windows are you running? On both desktop and laptop???
Click to expand...
Click to collapse
Windows 7 64-bit home premium on both.

Dirty Grimace said:
Windows 7 64-bit home premium on both.
Click to expand...
Click to collapse
OK, that shouldn't be the problem. Zvc yet updates do not take.
Is it rooted?
And it is running on sprint network?

secret.animal said:
OK, that shouldn't be the problem. Zvc yet updates do not take.
Is it rooted?
And it is running on sprint network?
Click to expand...
Click to collapse
Long story short, it's on ZVC, even with other updates that came up it would never update past it. I took it into sprint several times they didn't know why, I did root it as one guy said that was an option, I used stump root, but then I unrooted as I felt I was getting into something too complicated. It is on the sprint network, about 90% of the time and all the times I tried to update previous to the root/unroot. But I am not trying to update it since the root, mostly trying to restore to stock and start overish.

I'm thinking maybe a virtual machine with Linux might find it. If it can then there is something. And maybe we can redo the partitions and such.

secret.animal said:
I'm thinking maybe a virtual machine with Linux might find it. If it can then there is something. And maybe we can redo the partitions and such.
Click to expand...
Click to collapse
I will check with a couple guys see if I can find someone with a machine with Linux this weekend. Thanks a lot for you on going help.

I have this phone at least for another year. So at least someone out here is still willing to help.

secret.animal said:
I have this phone at least for another year. So at least someone out here is still willing to help.
Click to expand...
Click to collapse
I was unable to find anyone outside local computer store that I know. Kind of problem finding that in rural midwest. I also tried installing drivers in vista compatability as that was suggested no luck..

Dirty Grimace said:
I was unable to find anyone outside local computer store that I know. Kind of problem finding that in rural midwest. I also tried installing drivers in vista compatability as that was suggested no luck..
Click to expand...
Click to collapse
As for driver removal, one thing I remember with the nexus devices. There is wugfresh nrt, nexus root toolkit. Let me see which application or program they loaded for removal before reinstall of drivers. I know they have 2 places you check into.
Dang, I'll have to try to load them via a windows emulator. I'm running Linux right now.

secret.animal said:
As for driver removal, one thing I remember with the nexus devices. There is wugfresh nrt, nexus root toolkit. Let me see which application or program they loaded for removal before reinstall of drivers. I know they have 2 places you check into.
Dang, I'll have to try to load them via a windows emulator. I'm running Linux right now.
Click to expand...
Click to collapse
Let me know.. I am kinda at the point where I might try to find someone to flash it back to stock, and just activated my old phone til it gets back.. like I am past the point of frustration and no legit just don't get why, since all my other devices have zero issues connecting.