Develop Bugs

[Kernel] [PrimoU] 2013/05/21 HELLBOY

Hi
I started a new kernel "project"
Compared to Titanium-KISS this will include also experimental features
and will likely "move away" from HTC kernel sources in the future.
So this kernel is my "playground" but I try to keep it usable
and working all the time but you can expect that some things will
be broken from time to time
The first version is based on latest KISS kernel
So it includes all "well-known" features available there
I am not responsible for anything bad happens to your device
when using this kernel
github:
https://github.com/maxwen/primou-kernel-HELLBOY
Download:
http://www.mediafire.com/?lo2ctaplonbdh
201305202359
Changelog:
-reverted to BFQ v5.1 - v6 causes problems
-smartmax update
201305140232
Changelog:
-upgrade to BFQ v6
-added smartmax CPU governor
201305062257
Changelog:
-S2W fixes
-enabled fauxsound support
201305060119
Changelog:
-added double tap to wake
allows waking up the device by double tapping on the lower part of the screen - disabled by default
sysfs interface:
Code:
/sys/android_touch/s2w_allow_double_tap
1 -enable 0 - disable
Code:
/sys/android_touch/s2w_double_tap_barrier_y
default 1300 - y-barrier below that taps will be recognized
Code:
/sys/android_touch/s2w_double_tap_duration
default 150 - time in ms for minimal duration between the two taps
Code:
/sys/android_touch/s2w_double_tap_threshold
default 150 - threshold how much longer the duration can be then duration
20130411
4.2 version with fixed accelerometer - thanks to 1ceb0x
http://www.mediafire.com/?y04jyyu2wk2fig3
201302142348
Changelog:
-added fast charge
to enable run
Code:
echo 1 > /sys/class/power_supply/battery/fast_charge
-from now one you will also find the 4.2 in the same download location
it may have a different build data - Just look at the tag 42 in the file name
There is only one small source change required to work on 4.2 roms.
201212251747
Changelog:
-multi touch fix - thanks to d-panja3 for pointing me at this
201212152218
ChangeLog:
-completely new S2W based on the work of nik3r and myself for the HOX+
201212151740
Changelog:
-enable support for KSM http://en.wikipedia.org/wiki/Kernel_SamePage_Merging_(KSM)
to enable go to performance settings -> memory management -> Kernel samepage merging
201212011716
Changelog:
-switched to linaro 4.7 toolchain
-overhaul of compile flags
-improved lowmemorykiller
-added some arm specific fixes and enhancements
-reduced default vibrator strength
201211242348
This is for CM10 only!
Changelog:
-ramdisk change required for - http://review.cyanogenmod.org/#/c/19249/
201211231230
Changelog:
-updated interactive govener
-cleanup ramdisk
-readd fix for screen flickering in CM10
201211212238
Changelog:
-added interactive govener
-cleanup logging
-switched to SLOB memory allocator (needs testing if it will be an imrprovement)
201211160001
Changelog:
-included zram support http://en.wikipedia.org/wiki/ZRam
using CM10>=2011115 this works out of the box
using CM9 you need to flash this in recovery http://goo.im/devs/maxwen/CM10-primou/zram-script.zip
201211062321
HELLBOY kernels will from now on only for CM ROMS
Sense users use KISS kernel http://forum.xda-developers.com/showthread.php?t=1765687
Changelog:
-fix for screen flickering in CM10
201211052318
Changelog:
-this is only for CM10 now - others will follow after I have time to test
-updated to latest msm adreno kernel drivers
201210251305
Changelog:
-added BFQ scheduler
-debloated HTC stuff
-enabled OC up to 2.0GHz
Have fun
Max

awesome~try this one~THX

Max is this compatible with my CM10 rom's? as the PA\AOKP gsm differ ram disk wise from mine. if not it's fine, just put up a warning please

Hi
Oops - wait a little bit
Need to reupload
max
EDIT: new upload done

Lloir said:
Max is this compatible with my CM10 rom's?
Click to expand...
Click to collapse
It is build on latest CM10 ramdisk from "yesterday"
so the warning should go to all who are NOT using your CM10
I will not maintain different JB ramdisk so all users of
JB "based" ROMs like PA and AOKP be aware of this. You can try but I
will not guarantee that it works

maxwen said:
It is build on latest CM10 ramdisk from "yesterday"
so the warning should go to all who are NOT using your CM10
I will not maintain different JB ramdisk so all users of
JB "based" ROMs like PA and AOKP be aware of this. You can try but I
will not guarantee that it works
Click to expand...
Click to collapse
will check it on PA GSM. actually, the PA rom should not have a different ramdisk than cm so it should work.

I'll test on AOKP and let u know in a few hours.....keep it up
Sent from my One V using xda app-developers app

Confirm as working on latest PA 2.50 from GSM side.
No FC's, no errors..
It needs some improvements here and there but I know this is the first release so I will be gentle .
Congratulations Max and keep this work up. I might have found the right kernel for me.

work's like Sex on CM10 and UJ dude no issues at all, no slow downs nothing

Works perfect with with amazing sense v 0.2 up to 1.7ghz
Sent from my HTC Desire S using xda premium

Pre-oc and uv sense kernel
Build for Sense with pre-oc and uv
CHANGELOG:
Minimum freqency is 368mhz at boot
Max freqency is 1.7ghz at boot
UV for higher oc values is -25
-All thanks to maxwen
Download: http://shubham.viperbravo.info/boot-HELLBOY-sc-OC-VDD.img

i got the cm9 and cm10 versions from the name
can u plz tell me whats "boot-HELLBOY-201210251305.img"

abhikm001 said:
i got the cm9 and cm10 versions from the name
can u plz tell me whats "boot-HELLBOY-201210251305.img"
Click to expand...
Click to collapse
Sense Version.

kool

hey the ROM works like a CHARM on my AOKP 4.1.2 [bulid 24th oct] maintainded my rukin
keep up the good WORK

Hi
Just some more information about this kernel.
There are 2 motivations for me for this
1) Adi_Pat has unfortunately stopped his kernel dev for the moment
so I would like to continue his great work by integrating some of his
changes and improvements
2) moving towards a mainstream CAF kernel
To support simonsimons34 project to provide me a test platform
where I can easily test and try CAF components before.
max

1ceb0x said:
It needs some improvements here and there but I know this is the first release so I will be gentle .
Click to expand...
Click to collapse
Just tell me what you have in your mind
and I will see if I can do it

maxwen said:
Just tell me what you have in your mind
and I will see if I can do it
Click to expand...
Click to collapse
some improvements in internal task killer would be great to revamp a little the amount of ram free... right now the free ram is less with 10-15 mb than kiss kernel.

Van u add more governor's and schedulers? And one more req...voodoo sound please
Sent from my One V using xda app-developers app

@shubham can you build a sense version without uv as my phone does not boot an undervolted kernel. Please.

[rom][unofficial][4.2.2][cm10.1][06-12-13][FINAL ONE !]

Hello guys this is Cm10.1 rom made from source with weekly updates.​
Instructions:
Click to expand...
Click to collapse
-Put rom.zip on sdcard
-Boot to your recovery
-Wipe data factory reset and cache, dalvik cache
-Flash the rom
-Flash gapps (if you like)
-Reboot
-Boot into recovery and install Int2ext scripts if you like​

[rom][unofficial][4.2.2][cm10.1][06-12-13]
Download:
Click to expand...
Click to collapse
​
-12-06-13:http://www.androidfilehost.com/?fid=22979706399756090
-13-06-13: cm-10.1-20130613-EXPERIMENTAL-marvel-RC.zip - 121.29 MB
-14-06-13: cm-10.1-20130614-Kevinjoa-marvel.zip - 121.30 MB
-15-06-13:cm-10.1-20130615-Kevinjoa-RC.zip - 121.30 MB
-20-07-13:CM10.1-20-07-13
-24-10-13:CM10.1-24-10-13
-25-10-13:CM10.1-25-10-13-Sdcard-problems-fixed
-25-10-13:Mirror
-03-11-13:CM10.1-03-11-13-Unofficial-good
-10-11-13:CM10.1-10-11-13-good
-11-11-13:CM10.1-2013-11-11-UNOFFICIAL-marvel-good
-02-12-13:http://d-h.st/C97
DL Mirror of 02-13-13 build
-06-12-13:cm-10.1-20131206-UNOFFICIAL-marvel.zip - 118.01 MB​
Changelog:
Click to expand...
Click to collapse
​
-12-06-13: CM Upstream Changes
-13-06-13 :Cm Upstream Changes
-14-06-13: Cm Upstream Changes
-15-06-13: Cm Upstream Changes
-20-07-13: Cm Upstream Changes and built with linaro toolchain
-24-10-13: Lot cm upstream changes no linaro as it doesn't give better performance
-25-10-13: Rebuild again with some little change (fix sdcard problems)
-03-11-13:
-Cm sources update & androidarmv6 sources update
-Readd whole overlay (fixes some bugs which are in last release)
-Change sdcard path from sdcard0 to sdcard
-Board: Enable http://review.cyanogenmod.org/#/c/47757/
-killed audio logspam
-Fixed headset bug when plugging in headset soemtimes speaker still plays music is fixed now.
-overlay: Add volume rocker wake
-More not necessary to tell you
-10-11-13:
-Fix camera artifacts
-Disable adb authentication as it is not working
-Cm Source Update ?. I don't think there was anything.
-11-11-13:
-Changed toolchain to Linaro 4.8 --> http://releases.linaro.org/13.10/components/android/toolchain/4.8
-Newest sources
-02-12-13
-Refixed most bugs in last releases
-Camera updates from Zte blade (works fine again)
-Revert to bnep (bt tethering still broken but bluetooth works fine)
-Youtube HQ works again
-Odexed by default (faster, more memory for apps )
-Kernel: block: Add row i/o scheudler and set as default
-06-12-13
-Improved gps a lot
-Updated dalvik properties
-Fixed lockscreen lag (disable hw accecleration on lockscreen
-prefer 16bpp surface formats (system.prop)
-Disabled camera hdr
-Fixed bt tethering ?!
-Fixed a2dp lag ?!
Kernel:
-Makefile optimzations (- 02 flags)
-Increased min and max readahead speed
-Other optimizations
---Improved system performance​
Bugs:
Click to expand...
Click to collapse
​
-Wifi tethering
-A2dp
-USb tethering
-Native camcording ​

Source Code:
Click to expand...
Click to collapse
​
GENERIC SOURCE CODE : https://github.com/androidarmv6 & https://github.com/CyanogenMod
-- MARVEL DEVICE CONFIG : https://github.com/cm10-1-marvel/android_device_htc_marvel
-- MARVEL MSM7x27 -COMMON CONFIG : https://github.com/cm10-1-marvel/android_device_htc_msm7x27-common
-- KERNEL SOURCE CODE : https://github.com/cm10-1-marvel/OWL-Predator-KERNEL​
Thanks to:
cyanogenmod
androidarmv6
OliverG96,dudeman1996,benjamingwynn,modpunk,alquez ( all wfs devs )
rallapag
winsuk
arco
google
feroxxx
JDevs
New Maclaw
WinSUk
izi501
Crossfire77​

Updated !
Changelog: CM Upstream Changes
DL: http://d-h.st/ff7
Click Thanks if you like it and have fun with flashing it.

Kevinjoa said:
Hello guys this is Cm10.1 rom made from source with daily updates.​
​-Put rom.zip on sdcard
-Boot to your recovery
-Wipe data factory reset and cache, dalvik cache
-Flash the rom
-Flash gapps (if you like)
-Reboot
-Boot into recovery and install Int2ext scripts if you like​
Click to expand...
Click to collapse
it's great`~!!!:good:

New Build is up
Changes: - Fully Jdevs Base (when he updates his repo then mine will get updated, too)
-Cm Upstream Changes
Dl:cm-10.1-20130614-Kevinjoa-marvel.zip - 121.30 MB

Kevinjoa said:
New Build is up
Changes: - Fully Jdevs Base (when he updates his repo then mine will get updated, too)
-Cm Upstream Changes
Dl:cm-10.1-20130614-Kevinjoa-marvel.zip - 121.30 MB
Click to expand...
Click to collapse
Downloading
Sent from my Wildfire S A510e using xda premium downloading

giacomix5 said:
Downloading
Sent from my Wildfire S A510e using xda premium downloading
Click to expand...
Click to collapse
Have fun !

Does this ROM have an OTA updater?

As for now not but maybe in future. I'll see what I can do.
Gesendet von meinem Nexus 7 mit Tapatalk 4

New Build is up.
Changelog: CM Upstream Changes
DL: cm-10.1-20130615-Kevinjoa-RC.zip - 121.30 MB

Is it possible to make MarvelC versions?
Also, I made an index for Wildfire S things. Would you like me to keep the latest three versions in my archive since this is a daily build?
This way, if you want, you could simply link to the CM10 Daily folder in my archive for the ROMs.

I have no Idea how to build for marvelc.
You can upload them to yours but I'll keep the thread with the download list of the roms which are uploaded by me.

I'm thinking about creating a cool feautures Cm10.1 every few weeks. What do you guys think ?

I decided to make such an Version and it'll be amazing for sure I can tell.

Links Don't Work !!!

modydia2 said:
Links Don't Work !!!
Click to expand...
Click to collapse
Working fine for me.

Kevinjoa said:
Working fine for me.
Click to expand...
Click to collapse
thanks it works now
---------- Post added at 05:40 PM ---------- Previous post was at 05:34 PM ----------
Please I wanna Kernel for cm10.1 WFS 2012 & also support int2ext+ script couse i think cross fire kernel doesn't support becouse the room didnot work with his kernel thanks

It does work for Wfs2012 Buddy.
Gesendet von meinem Wildfire S A510e mit Tapatalk 2

Kevinjoa said:
It does work for Wfs2012 Buddy.
Gesendet von meinem Wildfire S A510e mit Tapatalk 2
Click to expand...
Click to collapse
Yes it works but without int2ext+ , when installing int2ext+ script it didnot work

<DISCONTINUED>[KK 4.4][KERNEL]Stock CM-11.0 with Linaro 4.8 and Mackay TWRP

Based on discussion on Semaphore Kernel thread, I'm glad that finally compiling using Linaro GCC 4.8 is possible now I've test this several months a go and still not boot until got some new idea arise in that discussion
Maybe this not a daily driver kernel, just feel free to try once and go back to other kernel :highfive:
Different from stock (changelogs):
build 20140324 for 20140323-NIGHTLY and newer
- Update iniram from 20140323-NIGHTLY
build 20140308 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
- Merge stock cm-11 & use initram 0307 nightly
build 20140214
- Revert s3cfb: tl2796: do not read calibration data on aries and use s3cfb: tl2796: detect invalid factory calibration data as on stock cm-11
build 20140211
- Add s3cfb: tl2796: do not read calibration data on aries from stock cm-11
- Use newer linaro toolchhain 14.01
- Update recovery to Mackay TWRP 2.6.3.0
build 20140111
- Update ramdisk to Tweak KSM Value
- Merge upstream CM-11
- Use newer linaro toolchhain 13.12
build 20140106
- Update ramdisk with Kitkat zRAM setting
- Fix lpm (charging when phone off)
- Cherry-picked optimize JPEG memory configuration & add ioctl to export memory configuration
- Only build with Mackay TWRP
build 20131231
- Fix outdated init file causing boot problem
build 20131221
- Ramdisk from cm-11-20131219-NIGHTLY-galaxysmtd
build 20131212/16
- Ramdisk from cm-11-20131206-NIGHTLY-galaxysmtd, unpacked using this tools.
- Compiled with linaro-toolchain-binaries 4.8 (32bit)
- Use Mackay TWRP 2.6.0.0 (-mtwrp) or Semaphore CWM 6.0.4.5 (-smcwm)
Additional changes in x-aries version:
Note: Video capture & playback (cma problem with or without ksm) mostly working.
In rare condition it need long time to start (5 minutes or more).
You can wait it if you have time (recommended) or simply restart your phone.
build 20140401
Compiled on this HEAD
- Update iniram from 20140331-NIGHTLY
- Enable KSM_CHECK_PAGE
- Enable Advanced TCP Congestion Control
build 20140324 for 20140323-NIGHTLY and newer
- Update iniram from 20140323-NIGHTLY
build 20140319 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
Compiled on this HEAD
- Add 2 patches to improve swap & revert aries-common: zRAM: only read one page at a time.
This time I prefer this kernel doc:
Code:
It is a logarithmic value - setting it to zero means "1 page", setting
it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
Zero disables swap readahead completely.
The default value is three (eight pages at a time). There may be some
small benefits in tuning this to a different value if your workload is
swap-intensive.
Lower values mean lower latencies for initial faults, but at the same time
extra faults and I/O delays for following faults if they would have been part of
that consecutive pages readahead would have brought in.
over aosp guide:
Code:
By default, the Linux kernel swaps in 8 pages of memory at a time.
When using ZRAM, the incremental cost of reading 1 page at a time is negligible and may help in case the device is under extreme memory pressure.
To read only 1 page at a time, add the following to your init.rc:
`write /proc/sys/vm/page-cluster 0`
build 20140313 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
Builded at this HEAD
- Switch cflag from -Og (reverted to -O2 then) to -O3, the kernel size was much bigger & reduce user RAM to 416MB
- Use newer linaro toolchhain 14.02
- Add aries-common: zRAM: only read one page at a time
imo default linux value will give better performance, but I prefer to follow aosp guide like in stock cm.
build 20140311 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
- Add 1100 oc step from mackay and 2 other commits.
build 20140308 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
- Use initram 0307 nightly with 144 mb zram + minor change to cma & merge android-3.0 aosp
build 20140306
- Add 2 commits to improve swap/zram + ramdisk 0228 nightly with 256 mb zram size (not stable)
build 20140226
- Add 2 commits related to video for linux + merge stock cm-11 & android-3.0 aosp
build 20140214
- Same as aries version + some commits related to memory
build 20140212
- Add s3cfb: tl2796: do not read calibration data on aries from stock cm-11
- Add backport SLUB from Linux 3.3 from Hellybean GT-I9300 + another 4 commits.
build 20140209
- Merge android-3.0 kernel common.
- Enable CLEANCACHE, FRONTSWAP & ZCACHE
- Another CMA try.
build 20140207
- Add BLN & Fast Charge from Semaphore kernel.
Note for BLN: Need to manually rename lights.aries.so.bln in /system/lib/hw/ to lights.aries.so
Rename original file to lights.aries.so.cm or else for backup. Repeat this step in every rom flashing.
- Use newer linaro toolchhain 14.01
- Merge android-3.0 kernel common.
build 20140131
A bunch of patches from faux123, semaphore, codeaurora & linux-next, starting from here till this.
Some part maybe useless and here is the noticeable part:
- Update LMK, CMA and KSM.
- Use LZ4 compressor for zram.
- Add Semaphore Auto Brightness from stratosk (build as a module)
build 20140121
- Add ZRAM_FOR_ANDROID from faux123
- Remove KSM to prevent video recording failure
- Use LZ4 for initram
- Update recovery to Mackay TWRP 2.6.3.0
- Some cherry-pick related to CMA, low memory killer & binder
build 20140111
- Same as aries version exclude merge upstream (already added)
- Replace xvmalloc with zsmalloc for zram
build 20140106
- Same as aries version
build 20140105
- Add pawitp cma-test with 417mb memory (no need bigmem libs) and possible bugs.
- Fix lpm (charging when phone off)
build 20131231
- different boot logo
- add smartass2 cpu gov
build 20131221/22
- 1.32ghz OC step and revert sleep call gpio to prevent SOD
- 397mb memory (install bigmem lib by kasper_h separately for 720k video record fix)
- kernel config for smaller kernel size (mostly taken from semaphore kernel by stratosk)
- merged to aosp android-3.0 kernel common (big changes in wifi driver and interactive gov)
- update gpu driver to DDK [email protected] (as on mackay kernel and others)
- cherry-picked some commits related to zram, lzo and interactive gov
- display boot progress, etc..
Download
http://goo.im/devs/didhiy/aries_cm-11.0
http://goo.im/devs/didhiy/ariesbr_cm-11.0 (I9000B)
tips: check (sort by) modification time to find the latest build
Source:
Kernel
x-aries version
Ramdisk
Credits:
- pawitp
- stratosk
- kasper_h
- derteufel1980
- jugster
- alberto96
- unjustified dev
- all aries variant devs and community

Nice work. I have been looking at the sets of patches needed for Linaro 4.8, but didnt try building one yet.
Last I tried 4.8 was almost 3 months ago, and it didnt boot up, although it build fine.
Would you be willing to add the extra OC steps ( 1100 , 1300 and 1400 ) into the kernel ?

ts1506 said:
Nice work. I have been looking at the sets of patches needed for Linaro 4.8, but didnt try building one yet.
Last I tried 4.8 was almost 3 months ago, and it didnt boot up, although it build fine.
Would you be willing to add the extra OC steps ( 1100 , 1300 and 1400 ) into the kernel ?
Click to expand...
Click to collapse
maybe... right now, I just let it same as stock to see if there's any improvement

just flashed over mackay 4.1.3 and i get better score on antutu, 4985.
keep up good work.

florum said:
just flashed over mackay 4.1.3 and i get better score on antutu, 4985.
keep up good work.
Click to expand...
Click to collapse
thanks for testing & comparing, I think mackay compiled with linaro 4.8 will scored much better

didhiy said:
thanks for testing & comparing, I think mackay compiled with linaro 4.8 will scored much better
Click to expand...
Click to collapse
Wow!! That's amazing. See my score. I never managed to go beyond 4930 in the past.
Can you please describe me what is linaro 4.8 and how does it increase performance.
I flashed bigmem libs for KitKat by Kaspar_h but still got 368 MB of available RAM. Maybe it's my fault, but still curious to know if bigmem libs works on this kernel.
Thanks in advance
Sent from my GT-I9000 using XDA Premium 4 mobile app

Rohitdahiya said:
Wow!! That's amazing. See my score. I never managed to go beyond 4930 in the past.
Can you please describe me what is linaro 4.8 and how does it increase performance.
I flashed bigmem libs for KitKat by Kaspar_h but still got 368 MB of available RAM. Maybe it's my fault, but still curious to know if bigmem libs works on this kernel.
Thanks in advance
Sent from my GT-I9000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you can read the technical details here:
http://gcc.gnu.org/gcc-4.8/changes.html
in short words, it promising better optimization to the codes compiled with it
the memory size was set inside the kernel, installing bigmem libs won't change the size

This kernel is a beast,thank you very much didhiy!
@Rohitdahiya:
You should enable a bigmem setting to make the available amount of RAM bigger.
Flashing only the libs doesn't change the current configuration
Inviato dal mio GT-I9000 utilizzando Tapatalk

thank you for the wonderful kernel please make an option to enable bigmem or atleast 396mb as in case of mackay kernel... thank you

vigneshnallamad said:
thank you for the wonderful kernel please make an option to enable bigmem or atleast 396mb as in case of mackay kernel... thank you
Click to expand...
Click to collapse
I've upload a version with "x-" prefix, bigmem enable (397mb) + 1.32GHz oc steps and some configs changes to make a small kernel (mostly taken from semaphore kernel)
let me know if that version works too
download link was on op

Does this kernel have zram as it's based on stock?
Sent from my GT-I9000 using Tapatalk 4

zakitheracer said:
Does this kernel have zram as it's based on stock?
Sent from my GT-I9000 using Tapatalk 4
Click to expand...
Click to collapse
yes it have zram just like stok

didhiy said:
I've upload a version with "x-" prefix, bigmem enable (397mb) + 1.32GHz oc steps and some configs changes to make a small kernel (mostly taken from semaphore kernel)
let me know if that version works too
download link was on op
Click to expand...
Click to collapse
wow i got 5200 on antutu if u believe in benchmarks... but performance overall is wonderful...
edit : any plans of including smartass v2 and wheatly just a request as of now this is my daily kernel
edit 2 : see the score my phone is ready for android 5.0 with help of u devs

vigneshnallamad said:
wow i got 5200 on antutu if u believe in benchmarks... but performance overall is wonderful...
edit : any plans of including smartass v2 and wheatly just a request as of now this is my daily kernel
edit 2 : see the score my phone is ready for android 5.0 with help of u devs
Click to expand...
Click to collapse
temple run 2 is my only "benchmark" thanks for your nice report
Hope it's stable enough for daily driver too
I use same kernel configuration in sc-02b aries_ntt and epic4g, it's running fine for daily

Guys,
This kernel gives you to put in Mackay Rom 4.1.3 (kk 4.4)?
Thank you for your answers already.

Alexandre_Silva said:
Guys,
This kernel gives you to put in Mackay Rom 4.1.3 (kk 4.4)?
Thank you for your answers already.
Click to expand...
Click to collapse
I don't understand exactly what you mean, but I guess you can flash this kernel on top of mackay cm-11 rom and maybe mackay omni too (tested on my sc-02b only) with caution, mackay setting won't work!

didhiy said:
I don't understand exactly what you mean, but I guess you can flash this kernel on top of mackay cm-11 rom and maybe mackay omni too (tested on my sc-02b only) with caution, mackay setting won't work!
Click to expand...
Click to collapse
in mackay omni rom description kasper h has mentioned about other kernels rom not working... didnt try it yet... will test and report back if works

vigneshnallamad said:
in mackay omni rom description kasper h has mentioned about other kernels rom not working... didnt try it yet... will test and report back if works
Click to expand...
Click to collapse
I've download omni mackay 1217, after comparing initram between omni & stock cm-11 I've found no different except the binaries. Then I flashed that rom & my kernel (which have 1219 cm-11) & it boot fine.
make sure you have a backup & semaphore tar if you wanna try

didhiy said:
I've download omni mackay 1217, after comparing initram between omni & stock cm-11 I've found no different except the binaries. Then I flashed that rom & my kernel (which have 1219 cm-11) & it boot fine.
make sure you have a backup & semaphore tar if you wanna try
Click to expand...
Click to collapse
That's great will give it a try tomo of possible please include smartass v2 in our next version

vigneshnallamad said:
That's great will give it a try tomo of possible please include smartass v2 in our next version
Click to expand...
Click to collapse
no promise, but it's possible

[KERNEL] Wind Kernel - r2 [4.4.128][UV][UC]

Hi everyone, I would like to share my personal u11+ kernel here. I am an amateur and love to cook kernel (previously >LG Nitro HD Wind kernel) for my own daily device.
OFC, Performance, Battery life and Stability aimed.
Hopefully you enjoy!
Changelog
r2
undervolted & lower freq step [email protected],[email protected] (credit: freak07)
add kcal supported
add wq_power_efficient toggle & on by default (credit: matthewdalex)
add fsync toggle & off by default (credit: franciscofranco)
updated cfq i/o scheduler & set it to default
linux v4.4.128
removed some unused drivers in defconfig
misc patches added & reverted some patches/tweaks in r1
r1
base: u11+ tw 1.05.709.12
merged: u11 tw 2.42.709.1_R2
upstream: Linux v4.4.78 -> v4.4.126
lowmemorykiller commits for managing free ram properly
i/o scheduler: maple
tcp: westwood
power-efficient workqueues
boeffla's generic wakelock blocker
misc patches/hacks for responsiveness and battery, view commits for detail
>download here<
Installation
save in external sd
flash via TWRP
optional: backup boot partition
>source<
Credit
nathanchance - linux upstream conflict fixes
tbalden - verity patch
boeffla - generic wakelock blocker
osm0sis - anykernel2
and developers sharing their source
XDA:DevDB Information
Wind Kernel, Kernel for the HTC U11+
Contributors
lyfkevin
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: r2
Beta Release Date: 2018-04-06
Created 2018-04-06
Last Updated 2018-04-06

Which security update is this on?

bosmon said:
Which security update is this on?
Click to expand...
Click to collapse
Stock one. I didnt touch it yet.
I hope doing these progressively. I found difficult to debug if adding massive features or patches at once.

This is stable .
Thank you.

newyesor said:
This is stable .
Thank you.
Click to expand...
Click to collapse
Glad to hear. Feedback are welcome.

r2 is released!
undervolted & lower freq step [email protected],[email protected] (credit: freak07)
add kcal supported
add wq_power_efficient toggle & on by default (credit: matthewdalex)
add fsync toggle & off by default (credit: franciscofranco)
updated cfq i/o scheduler & set it to default
linux v4.4.128
removed some unused drivers in defconfig
misc patches added & reverted some patches/tweaks in r1

lyfkevin said:
r2 is released!
undervolted & lower freq step [email protected],[email protected] (credit: freak07)
add kcal supported
add wq_power_efficient toggle & on by default (credit: matthewdalex)
add fsync toggle & off by default (credit: franciscofranco)
updated cfq i/o scheduler & set it to default
linux v4.4.128
removed some unused drivers in defconfig
misc patches added & reverted some patches/tweaks in r1
Click to expand...
Click to collapse
HI mate, thank's for you work...please would tell me how make it work kcal ?....everytime i tried open the app just close. Thnak's

neofrost37 said:
HI mate, thank's for you work...please would tell me how make it work kcal ?....everytime i tried open the app just close. Thnak's
Click to expand...
Click to collapse
Which app are u using?
You may use Kernel Adiutor, EX Kernel Manager
Personally I am using Ex Kernel Manager.

@lyfkevin
This kernel camera can't be opened. Did you find this a problem?

poppy22 said:
@lyfkevin
This kernel camera can't be opened. Did you find this a problem?
Click to expand...
Click to collapse
Camera should work fine in my released version.
You compiled from my github?
They are buggy in CAF-merged branches.
The stock rom is not fully capable with updated CAF patches.

lyfkevin said:
Camera should work fine in my released version.
You compiled from my github?
They are buggy in CAF-merged branches.
The stock rom is not fully capable with updated CAF patches.
Click to expand...
Click to collapse
Yes, I am the CAF version compiled from your GITHUB, but I can't work with your compiled brush into my mobile phone camera.

poppy22 said:
Yes, I am the CAF version compiled from your GITHUB, but I can't work with your compiled brush into my mobile phone camera.
Click to expand...
Click to collapse
You mean version r2? Any logcat.
Because camera works for me in either r1 and r2.
If you mean caf-branches in github, it's normal because they are still under testing.

lyfkevin said:
Which app are u using?
You may use Kernel Adiutor, EX Kernel Manager
Personally I am using Ex Kernel Manager.
Click to expand...
Click to collapse
Thank's for answer !!, i'm using kernel adiutor and let me play with some parameters of the screen, but i'm looking for more bright, so is possible to "overwrite" the settings to let the brightness go higher?

[KERNEL] [Q] Twisted Kernel V28 [Dipper] [30/06/2020]

This kernel supports ROMS based on Android 10 only.​
Main features:
- Upstreamed to Linux 4.9.228
- Spectrum profiles
- Compiled with Clang 11 + LLD + Polly
- Flash and forget
User features:
All these features can be used via EXKM app
- Vibration Control
- KCAL (Colour control)
- Sound Control
- Minimum Brightness Control
- USB Fast Charge
CPU features:
- CPU Governors: Schedutil
- Schedutil updated with patches from newer Linux versions
- Using PELT scheduler mechanism
- CPU idle improvements by kerneltoast
- CPU input boost
- RCU boost
File system & memory related features:
- NTFS and F2FS file systems supported
- f2fs Rapid GC
Network features:
- Westwood set as default TCP algorithm
- TTL
Other features:
- Xbox and Dualshock controllers supported with drivers updated to the latest
- Safetynet Flags Removed
- DTS Ultra support
- Wireguard support
- VDSO for better performance in 32 bit apps
- Unused Drivers And Logging removed for a smaller image
Requirements:
Magisk for recommended kernel configuration to set
First Time Installation (clean flash):
1.) Download the Kernel from second post
2.) Have Stock kernel and ramdisk installed, if you are coming from another kernel, follow 'Restore stock boot partition guide' below
3.) Flash Magisk (optional)
3.) Flash the kernel in recovery
Upgrading the kernel:
1.) Download the kernel from the second post
2.) Dirty flash the kernel (this means flashing the kernel without wiping anything)
Restore stock boot partition guide:
This guide will show you how to restore your ROMS stock kernel and ramdisk without losing any data. It will also uninstall Magisk which can be flashed again. Follow this guide if coming from another custom kernel or if something is not working like spectrum or the config file in twisted kernel.
Method 1:
1) Dirty flash your current ROM. This means installing the ROM without wiping anything.
2) Flash Magisk if desired.
3) You are now ready to flash a custom kernel.
Method 2:
1) Extract boot.img from your currently installed ROMs zip file.
2) Go to the install page in TWRP > Flash image > Select the boot.img you extracted and flash it to the boot partition.
3) Reflash Magisk if desired.
4) You have now restored your stock kernel and ramdisk and can now flash a custom kernel.
Hit thanks or donate to support my work
Donators:
Hellboy4
Amnon Nir
Ricardo
Thomas Boll
Peter Goudschmidt
PM if you want your XDA profile linked on this list
XDA:DevDB Information
Twisted Kernel, Kernel for the Xiaomi Mi 8
Telegram https://t.me/twistedkernel
Contributors
Twisted Prime
YTG, Hellboy4, Rommco05, Dahake, Spyronos for testing
bgcngm, abhishek987 for maintaining LOS kernel
oipr for sched backports
Raphielscape for backports
osm0sis for anykernel installer
SultanXDA for Simple LMK, CPU input boost
kdrag0n for lots of stuff
flar2 for vibration control and sound control
Arter97 for f2fs enhancements
frap129 for Spectrum
Everyone whom I cherry-picked from
Source Code: https://github.com/TwistedKernel/Twisted-845
Version Information
Status: Stable
Current Stable Version: V22
Created 2019-11-21
Last Updated 2020-03-02

great! i will try it

Downloads:
Download

Notes:
USB Fastcharge
This feature increases the maximum charging current from a PC to 900 mA from the default value of 500 mA.

Thank you. I hope you will support Miui Q soon.

khanhdx said:
Thank you. I hope you will support Miui Q soon.
Click to expand...
Click to collapse
I agree

hisham2630 said:
I agree
Click to expand...
Click to collapse
Try the latest nightly build

Delete please.

Twisted Kernel 11.0 B991 - Q:
- Rebased on los17 source. The base is now pure Android Q CAF.
- Linux 4.9.206
Download (https://drive.google.com/drive/folders/1k4VJxpE4VY5nNAe01DWNBcSHG0m59QlC?usp=sharing)

Twisted Kernel 13.0 B1030 - Q:
- Updated audio drivers
- Updated FTS touch screen drivers
- Removed Linux updates after 4.9.203 (caused black screens)
- iommu optimised by kerneltoast
- Removed volume key toggles from installer
- Rewrote TKManager to /TKManagerV4 in internal storage
- Moved charge limiter toggle to TKManagerV4/charging
- Moved low power saver toggle to TKManagerV4/powersaver
Download (https://drive.google.com/drive/folders/1k4VJxpE4VY5nNAe01DWNBcSHG0m59QlC?usp=sharing)

I'm try on mi8 miui
Sound works
But camera doesn't work

Hi, amazing job with this kernel!
I had just a on question - could you add some overclocking option (shouldn't be by default just an option in app), like on Pocophone? Because there are no options for MI 8 with overclocking
With this feature that amazing kernel would be a beast!

Good jobs
Good jobs bro.I like this kernel very much.

Twisted Kernel 14.0 B1067 - Q:
- Updated more drivers from Xiaomi
- Scheduler updates from Linux 4.14
- Switched to PELT
Download (https://drive.google.com/drive/folders/1k4VJxpE4VY5nNAe01DWNBcSHG0m59QlC?usp=sharing)

Does this kernel work with pixel experience?

Manelit said:
Does this kernel work with pixel experience?
Click to expand...
Click to collapse
Yes it's for Android Q, I'm using it now in experience

Is it working for MIUI Q?

roanepv said:
Is it working for MIUI Q?
Click to expand...
Click to collapse
Yes. But stock camera don't work. Alternative you can use gcam

Twisted Kernel 15.0 B1084 - Q:
- Fixed random reboots
Download (https://drive.google.com/drive/folders/1k4VJxpE4VY5nNAe01DWNBcSHG0m59QlC?usp=sharing)

İs Working camera with last eu beta ?

Furak07 said:
İs Working camera with last eu beta ?
Click to expand...
Click to collapse
Yes