Hello guys this is Cm10.1 rom made from source with weekly updates.
Instructions:
Click to expand...
Click to collapse
-Put rom.zip on sdcard
-Boot to your recovery
-Wipe data factory reset and cache, dalvik cache
-Flash the rom
-Flash gapps (if you like)
-Reboot
-Boot into recovery and install Int2ext scripts if you like
[rom][unofficial][4.2.2][cm10.1][06-12-13]
Download:
Click to expand...
Click to collapse
-12-06-13:http://www.androidfilehost.com/?fid=22979706399756090
-13-06-13: cm-10.1-20130613-EXPERIMENTAL-marvel-RC.zip - 121.29 MB
-14-06-13: cm-10.1-20130614-Kevinjoa-marvel.zip - 121.30 MB
-15-06-13:cm-10.1-20130615-Kevinjoa-RC.zip - 121.30 MB
-20-07-13:CM10.1-20-07-13
-24-10-13:CM10.1-24-10-13
-25-10-13:CM10.1-25-10-13-Sdcard-problems-fixed
-25-10-13:Mirror
-03-11-13:CM10.1-03-11-13-Unofficial-good
-10-11-13:CM10.1-10-11-13-good
-11-11-13:CM10.1-2013-11-11-UNOFFICIAL-marvel-good
-02-12-13:http://d-h.st/C97
DL Mirror of 02-13-13 build
-06-12-13:cm-10.1-20131206-UNOFFICIAL-marvel.zip - 118.01 MB
Changelog:
Click to expand...
Click to collapse
-12-06-13: CM Upstream Changes
-13-06-13 :Cm Upstream Changes
-14-06-13: Cm Upstream Changes
-15-06-13: Cm Upstream Changes
-20-07-13: Cm Upstream Changes and built with linaro toolchain
-24-10-13: Lot cm upstream changes no linaro as it doesn't give better performance
-25-10-13: Rebuild again with some little change (fix sdcard problems)
-03-11-13:
-Cm sources update & androidarmv6 sources update
-Readd whole overlay (fixes some bugs which are in last release)
-Change sdcard path from sdcard0 to sdcard
-Board: Enable http://review.cyanogenmod.org/#/c/47757/
-killed audio logspam
-Fixed headset bug when plugging in headset soemtimes speaker still plays music is fixed now.
-overlay: Add volume rocker wake
-More not necessary to tell you
-10-11-13:
-Fix camera artifacts
-Disable adb authentication as it is not working
-Cm Source Update ?. I don't think there was anything.
-11-11-13:
-Changed toolchain to Linaro 4.8 --> http://releases.linaro.org/13.10/components/android/toolchain/4.8
-Newest sources
-02-12-13
-Refixed most bugs in last releases
-Camera updates from Zte blade (works fine again)
-Revert to bnep (bt tethering still broken but bluetooth works fine)
-Youtube HQ works again
-Odexed by default (faster, more memory for apps )
-Kernel: block: Add row i/o scheudler and set as default
-06-12-13
-Improved gps a lot
-Updated dalvik properties
-Fixed lockscreen lag (disable hw accecleration on lockscreen
-prefer 16bpp surface formats (system.prop)
-Disabled camera hdr
-Fixed bt tethering ?!
-Fixed a2dp lag ?!
Kernel:
-Makefile optimzations (- 02 flags)
-Increased min and max readahead speed
-Other optimizations
---Improved system performance
Bugs:
Click to expand...
Click to collapse
-Wifi tethering
-A2dp
-USb tethering
-Native camcording
Source Code:
Click to expand...
Click to collapse
GENERIC SOURCE CODE : https://github.com/androidarmv6 & https://github.com/CyanogenMod
-- MARVEL DEVICE CONFIG : https://github.com/cm10-1-marvel/android_device_htc_marvel
-- MARVEL MSM7x27 -COMMON CONFIG : https://github.com/cm10-1-marvel/android_device_htc_msm7x27-common
-- KERNEL SOURCE CODE : https://github.com/cm10-1-marvel/OWL-Predator-KERNEL
Thanks to:
cyanogenmod
androidarmv6
OliverG96,dudeman1996,benjamingwynn,modpunk,alquez ( all wfs devs )
rallapag
winsuk
arco
google
feroxxx
JDevs
New Maclaw
WinSUk
izi501
Crossfire77
Updated !
Changelog: CM Upstream Changes
DL: http://d-h.st/ff7
Click Thanks if you like it and have fun with flashing it.
Kevinjoa said:
Hello guys this is Cm10.1 rom made from source with daily updates.
-Put rom.zip on sdcard
-Boot to your recovery
-Wipe data factory reset and cache, dalvik cache
-Flash the rom
-Flash gapps (if you like)
-Reboot
-Boot into recovery and install Int2ext scripts if you like
Click to expand...
Click to collapse
it's great`~!!!:good:
New Build is up
Changes: - Fully Jdevs Base (when he updates his repo then mine will get updated, too)
-Cm Upstream Changes
Dl:cm-10.1-20130614-Kevinjoa-marvel.zip - 121.30 MB
Kevinjoa said:
New Build is up
Changes: - Fully Jdevs Base (when he updates his repo then mine will get updated, too)
-Cm Upstream Changes
Dl:cm-10.1-20130614-Kevinjoa-marvel.zip - 121.30 MB
Click to expand...
Click to collapse
Downloading
Sent from my Wildfire S A510e using xda premium downloading
giacomix5 said:
Downloading
Sent from my Wildfire S A510e using xda premium downloading
Click to expand...
Click to collapse
Have fun !
Does this ROM have an OTA updater?
As for now not but maybe in future. I'll see what I can do.
Gesendet von meinem Nexus 7 mit Tapatalk 4
New Build is up.
Changelog: CM Upstream Changes
DL: cm-10.1-20130615-Kevinjoa-RC.zip - 121.30 MB
Is it possible to make MarvelC versions?
Also, I made an index for Wildfire S things. Would you like me to keep the latest three versions in my archive since this is a daily build?
This way, if you want, you could simply link to the CM10 Daily folder in my archive for the ROMs.
I have no Idea how to build for marvelc.
You can upload them to yours but I'll keep the thread with the download list of the roms which are uploaded by me.
I'm thinking about creating a cool feautures Cm10.1 every few weeks. What do you guys think ?
I decided to make such an Version and it'll be amazing for sure I can tell.
Links Don't Work !!!
modydia2 said:
Links Don't Work !!!
Click to expand...
Click to collapse
Working fine for me.
Kevinjoa said:
Working fine for me.
Click to expand...
Click to collapse
thanks it works now
---------- Post added at 05:40 PM ---------- Previous post was at 05:34 PM ----------
Please I wanna Kernel for cm10.1 WFS 2012 & also support int2ext+ script couse i think cross fire kernel doesn't support becouse the room didnot work with his kernel thanks
It does work for Wfs2012 Buddy.
Gesendet von meinem Wildfire S A510e mit Tapatalk 2
Kevinjoa said:
It does work for Wfs2012 Buddy.
Gesendet von meinem Wildfire S A510e mit Tapatalk 2
Click to expand...
Click to collapse
Yes it works but without int2ext+ , when installing int2ext+ script it didnot work
Related
Hi
I started a new kernel "project"
Compared to Titanium-KISS this will include also experimental features
and will likely "move away" from HTC kernel sources in the future.
So this kernel is my "playground" but I try to keep it usable
and working all the time but you can expect that some things will
be broken from time to time
The first version is based on latest KISS kernel
So it includes all "well-known" features available there
I am not responsible for anything bad happens to your device
when using this kernel
github:
https://github.com/maxwen/primou-kernel-HELLBOY
Download:
http://www.mediafire.com/?lo2ctaplonbdh
201305202359
Changelog:
-reverted to BFQ v5.1 - v6 causes problems
-smartmax update
201305140232
Changelog:
-upgrade to BFQ v6
-added smartmax CPU governor
201305062257
Changelog:
-S2W fixes
-enabled fauxsound support
201305060119
Changelog:
-added double tap to wake
allows waking up the device by double tapping on the lower part of the screen - disabled by default
sysfs interface:
Code:
/sys/android_touch/s2w_allow_double_tap
1 -enable 0 - disable
Code:
/sys/android_touch/s2w_double_tap_barrier_y
default 1300 - y-barrier below that taps will be recognized
Code:
/sys/android_touch/s2w_double_tap_duration
default 150 - time in ms for minimal duration between the two taps
Code:
/sys/android_touch/s2w_double_tap_threshold
default 150 - threshold how much longer the duration can be then duration
20130411
4.2 version with fixed accelerometer - thanks to 1ceb0x
http://www.mediafire.com/?y04jyyu2wk2fig3
201302142348
Changelog:
-added fast charge
to enable run
Code:
echo 1 > /sys/class/power_supply/battery/fast_charge
-from now one you will also find the 4.2 in the same download location
it may have a different build data - Just look at the tag 42 in the file name
There is only one small source change required to work on 4.2 roms.
201212251747
Changelog:
-multi touch fix - thanks to d-panja3 for pointing me at this
201212152218
ChangeLog:
-completely new S2W based on the work of nik3r and myself for the HOX+
201212151740
Changelog:
-enable support for KSM http://en.wikipedia.org/wiki/Kernel_SamePage_Merging_(KSM)
to enable go to performance settings -> memory management -> Kernel samepage merging
201212011716
Changelog:
-switched to linaro 4.7 toolchain
-overhaul of compile flags
-improved lowmemorykiller
-added some arm specific fixes and enhancements
-reduced default vibrator strength
201211242348
This is for CM10 only!
Changelog:
-ramdisk change required for - http://review.cyanogenmod.org/#/c/19249/
201211231230
Changelog:
-updated interactive govener
-cleanup ramdisk
-readd fix for screen flickering in CM10
201211212238
Changelog:
-added interactive govener
-cleanup logging
-switched to SLOB memory allocator (needs testing if it will be an imrprovement)
201211160001
Changelog:
-included zram support http://en.wikipedia.org/wiki/ZRam
using CM10>=2011115 this works out of the box
using CM9 you need to flash this in recovery http://goo.im/devs/maxwen/CM10-primou/zram-script.zip
201211062321
HELLBOY kernels will from now on only for CM ROMS
Sense users use KISS kernel http://forum.xda-developers.com/showthread.php?t=1765687
Changelog:
-fix for screen flickering in CM10
201211052318
Changelog:
-this is only for CM10 now - others will follow after I have time to test
-updated to latest msm adreno kernel drivers
201210251305
Changelog:
-added BFQ scheduler
-debloated HTC stuff
-enabled OC up to 2.0GHz
Have fun
Max
awesome~try this one~THX
Max is this compatible with my CM10 rom's? as the PA\AOKP gsm differ ram disk wise from mine. if not it's fine, just put up a warning please
Hi
Oops - wait a little bit
Need to reupload
max
EDIT: new upload done
Lloir said:
Max is this compatible with my CM10 rom's?
Click to expand...
Click to collapse
It is build on latest CM10 ramdisk from "yesterday"
so the warning should go to all who are NOT using your CM10
I will not maintain different JB ramdisk so all users of
JB "based" ROMs like PA and AOKP be aware of this. You can try but I
will not guarantee that it works
maxwen said:
It is build on latest CM10 ramdisk from "yesterday"
so the warning should go to all who are NOT using your CM10
I will not maintain different JB ramdisk so all users of
JB "based" ROMs like PA and AOKP be aware of this. You can try but I
will not guarantee that it works
Click to expand...
Click to collapse
will check it on PA GSM. actually, the PA rom should not have a different ramdisk than cm so it should work.
I'll test on AOKP and let u know in a few hours.....keep it up
Sent from my One V using xda app-developers app
Confirm as working on latest PA 2.50 from GSM side.
No FC's, no errors..
It needs some improvements here and there but I know this is the first release so I will be gentle .
Congratulations Max and keep this work up. I might have found the right kernel for me.
work's like Sex on CM10 and UJ dude no issues at all, no slow downs nothing
Works perfect with with amazing sense v 0.2 up to 1.7ghz
Sent from my HTC Desire S using xda premium
Pre-oc and uv sense kernel
Build for Sense with pre-oc and uv
CHANGELOG:
Minimum freqency is 368mhz at boot
Max freqency is 1.7ghz at boot
UV for higher oc values is -25
-All thanks to maxwen
Download: http://shubham.viperbravo.info/boot-HELLBOY-sc-OC-VDD.img
i got the cm9 and cm10 versions from the name
can u plz tell me whats "boot-HELLBOY-201210251305.img"
abhikm001 said:
i got the cm9 and cm10 versions from the name
can u plz tell me whats "boot-HELLBOY-201210251305.img"
Click to expand...
Click to collapse
Sense Version.
kool
hey the ROM works like a CHARM on my AOKP 4.1.2 [bulid 24th oct] maintainded my rukin
keep up the good WORK
Hi
Just some more information about this kernel.
There are 2 motivations for me for this
1) Adi_Pat has unfortunately stopped his kernel dev for the moment
so I would like to continue his great work by integrating some of his
changes and improvements
2) moving towards a mainstream CAF kernel
To support simonsimons34 project to provide me a test platform
where I can easily test and try CAF components before.
max
1ceb0x said:
It needs some improvements here and there but I know this is the first release so I will be gentle .
Click to expand...
Click to collapse
Just tell me what you have in your mind
and I will see if I can do it
maxwen said:
Just tell me what you have in your mind
and I will see if I can do it
Click to expand...
Click to collapse
some improvements in internal task killer would be great to revamp a little the amount of ram free... right now the free ram is less with 10-15 mb than kiss kernel.
Van u add more governor's and schedulers? And one more req...voodoo sound please
Sent from my One V using xda app-developers app
@shubham can you build a sense version without uv as my phone does not boot an undervolted kernel. Please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogeMod 10.1 [by OWL Project] for Wildfire S [Marvel]Based on Android 4.2.2
DISCLAIMER
I am not responsible for bricked devices, broken hearts, thermonuclear war, you getting fired because the alarm app failed, lost virgin or unfulfilled sexual partners. I also don't promise you regular seks or increase of your salary after installing this rom. It's up to you, not to me.
Click to expand...
Click to collapse
OWL Project - is a small project consisting of several people. We are trying to keep an old device, which is no longer supported by its manufacturer, by making new Android versions for it as bugfree as it's possible.
For now we are developing only the new CyanogenMod version, which is CM 10.1. We plan to make 10.2 when it comes. We used to work on CM 10.0, but now it's history.
Click to expand...
Click to collapse
What does "OWL Project" mean?
It's simple. The full name of our team is "Open Wildfire Life Project".
Click to expand...
Click to collapse
Code:
[B]- GSM
- Data (2G/3G)
- SMS / MMS
- GPS
- USB
- Bluetooth
- WI-FI
- LED
- Camera
- Photocamera [fully]
- Camcoder (low FPS)
- Panorama mode
- Video playback [fully][/B]
[B]System[/B]
- Multi-User Mode [fully]
- YouTube [LQ/HQ/Browser]
- VK Video
- USB-Tethering
Code:
[B]
- Wi-Fi-Tethering
- A2DP lag
*************
- FM Radio[/B]
* Support for WFS 2012
Code:
[B]16.06.2013[/B] [B][I][Release Candidate v3.0][/I][/B]
* System
- Update OMX libs
- Camera: Add support for zoom ratios
- Camera: Increase frame rate support 30 to CameraHAL
- Camera: Add support to set frame rate modes
- Camera: Fix FPS [update gralloc] [not ideals]
- Fix Lockscreen
- Fix USB-Tethering [working]
- [I]Added OWL Updater v1.1 (OTA Support)[/I]
* Kernel
- Completely new Kernel
* [B][I]OWL-Predator [v2.0][/I][/B]
- Backported console module from Kernel 3.0
- Backported backlight module from Kernel 3.0
- Add PCM-WB support for VoIP
- Enable SRS Post processing
- Fix 2-way call recording
- Enabled TUN driver
[B]* Governors[/B]
-[B] Immortal-WFS [v1] [I][by OWL Project][/I] [NEW][/B]
- Default to SmartassV2
===================================
[B]27.05.2013[/B] [B][I][Release Candidate v2.1][/I][/B]
Kernel
- [B][I]OWL Predator v1.0 [fix][/I][/B]
- Backport KGSL driver from Kernel 3.x
- Backport ashmem from Kernel 3.0
- Backport lowmemorykiller from Kernel 3.4
- Backport UHID driver from Kernel 3.8
---------------------------
- Fix charging from USB
- Fix "WI-FI in sleep mode"
---------------------------
- Add zRam
- Add LZO Compression
===================================
[B]25.05.2013[/B] [B][I][Release Candidate v2.0][/I][/B]
* Update CameraHal
* Update qcom
---------------------
- Fix Panorama mode
- Fix Bluetooth tethering
- Enable Multi-User Mode [fully]
---------------------
- Added OTA Updater
---------------------
Kernel
- [B]OWL-Predator v.0.5[/B]
* Support IPv6
* Delete unnecessary CPU Mode (Governors)
===================================
[B]17.05.2013[/B] [B][I][Release Candidate][/I][/B]
- Fix Camera artifacts
- Update GPS config
- Enable Project Butter / v-Sync [COLOR="Silver"][not fully][/COLOR]
- Disable Electro bean animation
- Kernel [B][I]OWL-Predator v.0.2[/I][/B]
* support CIFS/NFS (network file system)
* added modules from Kernel 3.x
===================================
[B]13.05.2013[/B] [B][I][Post-Beta][/I][/B]
- Fix Camera
- Fix Camcoder
- Fix Videoplayback
- Fix YouTube [LQ/HQ/Browser]
- Kernel [B][I]OWL-Predator v.0.1[/I][/B]
Code:
Loading..
[All Version]Google.Project
Goo.im
* CryptoMilk
* Niks255
* feroxxx
* Crossfire77
* WinSuk
* Ganster47
* eoghan2t7
* AndroidARMv6 Team
* CyanogenMod
Click to expand...
Click to collapse
Really gret rom. Keep up that amazing work.
My first thread was of a crappy Xperia rom that no one cared about. Your first thread is epic.
Sent from my Wildfire S A510e using xda premium
thehacka1 said:
My first thread was of a crappy Xperia rom that no one cared about. Your first thread is epic.
Sent from my Wildfire S A510e using xda premium
Click to expand...
Click to collapse
Because his work is epic. Look at this. Almost bugfree. Ported Aokp of it and it is so smooth so 4.2.2 will be a daily driver for many of us and you can check marvellous group for my project.
Awesome work
Videorecording and playback (and all other things) are working as mentioned in first post. I can only confirm this
I couldn't find other bugs
(my sister is using this Rom, she will tell me the bugs faster as i would find them, you know what i mean )
Just one question, is the flashlight toogle (like on armv7 devices) possible?
Thanks for your work
Gesendet von meinem MB526 mit Tapatalk 2
GApps not included right?
Sent from my Wildfire S A510e using xda app-developers app
andymasterid said:
GApps not included right?
Sent from my Wildfire S A510e using xda app-developers app
Click to expand...
Click to collapse
Flash this Gapps : http://forum.xda-developers.com/showthread.php?t=1917411 . It's optimized for Armv6 :good:
Whoaa... FB contact sync works, SRS audio works also :good:
btw, is there possibility to add Volume Wake feature?
I dont understand it..i have problem...after i flash rom,everything work OK...but next i flash gapps,i cant write message,or password becouse Keybord doesnt show me..she doesnt respond..Help me please
stew0.sv said:
I dont understand it..i have problem...after i flash rom,everything work OK...but next i flash gapps,i cant write message,or password becouse Keybord doesnt show me..she doesnt respond..Help me please
Click to expand...
Click to collapse
reflash the rom
---------- Post added at 06:41 AM ---------- Previous post was at 06:40 AM ----------
thanks for not letting our great device die and making this superb rom , newer android in on its way during this google i/o
i try it 3x..but again have this problem
stew0.sv said:
I dont understand it..i have problem...after i flash rom,everything work OK...but next i flash gapps,i cant write message,or password becouse Keybord doesnt show me..she doesnt respond..Help me please
Click to expand...
Click to collapse
I dont have that problem with Gapps lite, maybe you should use another gapps.
i use this : http://goo.im/gapps/gapps-jb-20130301-signed.zip
and i try this,but againg problem : http://www.mediafire.com/?u9z6odl4hc6jhb9
AOKP rom is included gapps,if this rom icluded gapps it will be all right,i think..would you import gapps in this rom please??
Your ROM is very very great !
I have a problem with Google Play Services : with the Post-Beta build I was able to download the last version (for Hangouts) but with your last build Google Play says that the app isn't compatible with my phone... (there have been no update of the app).
izi501 said:
Your ROM is very very great !
I have a problem with Google Play Services : with the Post-Beta build I was able to download the last version (for Hangouts) but with your last build Google Play says that the app isn't compatible with my phone... (there have been no update of the app).
Click to expand...
Click to collapse
Yes, yes. Forgot.
Use any file manager, navigate to /system, look for the build.prop
Replace this build.prop
Enjoy
*Deleted*
stew0.sv said:
i use this : http://goo.im/gapps/gapps-jb-20130301-signed.zip
and i try this,but againg problem : http://www.mediafire.com/?u9z6odl4hc6jhb9
AOKP rom is included gapps,if this rom icluded gapps it will be all right,i think..would you import gapps in this rom please??
Click to expand...
Click to collapse
Use this GApps.
GAPPS_Lite_4.2.2_by_JDev_[OWLPROJECT].zip
For me, almost every app in playstore is incompatible
oemfoefoee said:
For me, almost every app in playstore is incompatible
Click to expand...
Click to collapse
Try the new build.prop, maybe it will help as it helped me for Play services.
Really great ROM, using Post-Beta ATM. Everything works fine for me (even GPS gets locked within 10 secs!). You could increase battery drain, but maybe it's just my WFS (will get a new device soon). I just ask myself why you and your team didn't join xda earlier?!
And maybe you could implent GAPPs as well as your ROM isn't that big.
Gesendet von meinem HTC Wildfire S A510e mit Tapatalk 4 beta
[JB 4.3][ROM]Infamous AOKP 1.1
As many users requested an update of Infamous AOKP for JB4.3, I decided to give it a try!
I have been sharing my CM7/CM9/CM10/CM10.1 builds for some time in several thread, which culminated in the MackayROM & Infamous AOKP. I continue now with JB4.3 from where I was for JB4.2. Infamous AOKP is based on AOKP sources, with several performance enhancements.
About AOKP: AOKP is a free, community built, aftermarket firmware distribution of Android 4.3 (JellyBean), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on AOKP sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Changelog of 1.1 - 09-Oct-2013
-Source updated to 9-Oct
-Newest kernel (with zram) & updated device tree
Changelog of 1.0 - 25-Sep-2013
-First ALPHA build
-I booted it to be sure it works, but it has not been extensively tested
Full changelog of 1.0 compared to stock AOKP:
AOKP sources of 25-Sep-2013
All features compared to stock kernel:
-Mackay kernel 0.415: http://forum.xda-developers.com/showthread.php?t=2397502
-Christopher86's cortex-A8 optimized Linaro toolchain (September version)
-O3 optimization
-updated to linux kernel version 3.0.96
-SLQB memory allocator (default, should be slightly faster)
-XZ compression of kernel & initramfs
-395MB RAM
-SIO scheduler
-Added Lagfree governor
-ROW scheduler (tweaked, default scheduler)
-FIOPS scheduler (tweaked)
-XZ compression of kernel & initramfs
-395MB RAM
-many improvements to IO schedulers in general
-Deadline tuning (thanks to DerTeufel)
-Ondemand tuned (updated based on code of stratosk)
-SmartassV2 governor
-Interactive governor (updated to android 3.4 code + fixes)
-Wheatley & Lulzactive governors
-Conservative tuned
-Call volume hack (use “Settings>Mackay Settings”* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using “Settings>Mackay Settings”*)
-Battery life extender (set through “Settings>Mackay Settings”*)
-CustomVoltage (set using NSTools)
-USB OTG support (needs external power supply)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks: http://lwn.net/Articles/489734/
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
-Unaligned CPU access
-Improvements to RWSEM code
-Improvements to binder code
-Improvements to tmpfs
-Added frandom (much faster random number generator)
-Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
-Many parts of the code build as module to reduce effective kernel size
-Updated wifi driver to 5.90.195.114
-Updated GPU driver to DDK [email protected]
-Proportional Rate Reduction for TCP
-Introduce timer slack controller
ROM comes with stock colour. Version with voodoo colour can be downloaded from:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/
Kernel for switching internal & external SD
Because vold.fstab is no longer used and has been integrated in fstab.aries (which can only be changed before compiling the kernel, as it ends up in the ramdisk), I made a special kernel version with switched SD cards:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/switchSD/
*Available through Settings>Mackay Settings
CWM:
-Clear NSTools settings
-Clear init.d settings
-Show battery status in recovery
-Aroma FileManager
-Include using soft keys to navigate the menu (thanks fishears for the idea)
-Enable holding keys for repeated presses
-Themed orange
TWRP:
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
-Build in a script to reboot from twrp to cwm*
*To use this feature from TWRP, tap advanced>run app>rebootcwm.zip. Then from the homescreen choose: reboot>recovery
Added apps:
-AngryGPS
vendor/aokp:
-Adapt for custom Infamous building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Infamous team)
device/samsung/aries-common:
-Sets app-close to 1000 ms
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (“Mackay Settings” in Settings menu):
Add mackay kernel settings options:
>Recovery selection
>WiFi PM mode selection
>BLX settings
>BLN activation
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash a gapps packages of choice
-Reboot your phone
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot
-Custom kernels can be used only if specific for JB4.3
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-AOKP for the basecode used
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax & xdafileserver for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
XDAfileserver
Rootaxbox (still uploading, please use XDAfileserver)
Google Apps
http://goo.im/gapps
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/showthread.php?t=2214468
To download the same kernel, but then with voodoo colour:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/
XDA:DevDB Information
Infamous AOKP, a ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
Based On: AOKP
Version Information
Status: Beta
Created 2013-09-25
Last Updated 2013-10-09
Reserved
Thank
Thank
bootanimation very cool, the touch buttons does not seem to go very well and when you enter settings take small screenshots
EDIT:
solved installing gapps. sorry for the negative post
awesomee! a new AOKP for our i9000!! hoppefully certainly be improved and very stable, you're a fantastic developer
Very good rom.I like the settings(ribbons...)Congratulations.
Rom is very good working without problem, only thing i miss is the settings for kernel (cpu,governor,scheduler etc) in mackay settings there is not option, neither in system. Is something i forget to do?or it is not implemented?
Also i cannot find the quick settings and the most settings for status bar toggles(custom toggles) are grey,not selectable but this is not problem rather a report(used to it from mackay 4.3 cm). And a question,is there a way to have dsp manager without a notification in status bar?
Thank you for bringing aokp 4.3 to our sgs, also, boot animation is nice
Sent from my GT-I9000 using xda app-developers app
I had problems with apn, to apply and remove WiFi connection disappears even taking 3g apn
slipknot31 said:
I had problems with apn, to apply and remove WiFi connection disappears even taking 3g apn
Click to expand...
Click to collapse
Copy /system/etc/apns-conf.xml from the latest nightly and paste to /etc. (You'll replace that old one with it). Set permission to 777 and reboot. After rebooting open APN settings and: menu, reset to default! It worked me.
saszseb said:
Copy /system/etc/apns-conf.xml from the latest nightly and paste to /etc. (You'll replace that old one with it). Set permission to 777 and reboot. After rebooting open APN settings and: menu, reset to default! It worked me.
Click to expand...
Click to collapse
Hello I changed the file APNs but nothing has changed. Where to change the set permission 777?
tanks
Giandi said:
Hello I changed the file APNs but nothing has changed. Where to change the set permission 777?
tanks
Click to expand...
Click to collapse
By 777 he means to change the permissions of the file to rw-r-r as the other files (use root explorer and long press the file to find permissions).
tsatomas said:
By 777 he means to change the permissions of the file to rw-r-r as the other files (use root explorer and long press the file to find permissions).
Click to expand...
Click to collapse
read: 4
write: 2
execute: 1
(Maybe 644 is enough.)
Sent from my GT-I9000 using Tapatalk 4
Well, i am not good in counting perm,i change it as the original or as the other files are!
Sent from my GT-I9000 using xda app-developers app
Hey kasper_h,
is this relevant? http://www.androidpolice.com/2013/0...o-find-5-android-4-3-nightlies-available-now/
and does it help in any way for this Rom's development?
Ramsey said:
Hey kasper_h,
is this relevant? http://www.androidpolice.com/2013/0...o-find-5-android-4-3-nightlies-available-now/
and does it help in any way for this Rom's development?
Click to expand...
Click to collapse
I think they made a break without compiling nightlys, but now they compile then again, its only relevant when you own N7-2 or Oppo 5.
Gesendet von meinem GT-I9000 mit Tapatalk 4
really waitin for this,thus downloadin now :beer:
Sent from my GT-I9000 using xda premium
supergeorg said:
I think they made a break without compiling nightlys, but now they compile then again, its only relevant when you own N7-2 or Oppo 5.
Gesendet von meinem GT-I9000 mit Tapatalk 4
Click to expand...
Click to collapse
In the comments section, one of the persons of AOKP says that it's not only for those devices but for many others.
compacity said:
really waitin for this,thus downloadin now :beer:
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Hey compacity, how is AOKP running? and did you try the Mackay ROM before this? if yes, which one is more stable and faster?
@Ramsey
If you like my opinion mackay cm is more stable plus cheries and interface and fast than infamous. I just reverted to mackay from aokp
Sent from my GT-I9000 using xda app-developers app
Based on discussion on Semaphore Kernel thread, I'm glad that finally compiling using Linaro GCC 4.8 is possible now I've test this several months a go and still not boot until got some new idea arise in that discussion
Maybe this not a daily driver kernel, just feel free to try once and go back to other kernel :highfive:
Different from stock (changelogs):
build 20140324 for 20140323-NIGHTLY and newer
- Update iniram from 20140323-NIGHTLY
build 20140308 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
- Merge stock cm-11 & use initram 0307 nightly
build 20140214
- Revert s3cfb: tl2796: do not read calibration data on aries and use s3cfb: tl2796: detect invalid factory calibration data as on stock cm-11
build 20140211
- Add s3cfb: tl2796: do not read calibration data on aries from stock cm-11
- Use newer linaro toolchhain 14.01
- Update recovery to Mackay TWRP 2.6.3.0
build 20140111
- Update ramdisk to Tweak KSM Value
- Merge upstream CM-11
- Use newer linaro toolchhain 13.12
build 20140106
- Update ramdisk with Kitkat zRAM setting
- Fix lpm (charging when phone off)
- Cherry-picked optimize JPEG memory configuration & add ioctl to export memory configuration
- Only build with Mackay TWRP
build 20131231
- Fix outdated init file causing boot problem
build 20131221
- Ramdisk from cm-11-20131219-NIGHTLY-galaxysmtd
build 20131212/16
- Ramdisk from cm-11-20131206-NIGHTLY-galaxysmtd, unpacked using this tools.
- Compiled with linaro-toolchain-binaries 4.8 (32bit)
- Use Mackay TWRP 2.6.0.0 (-mtwrp) or Semaphore CWM 6.0.4.5 (-smcwm)
Additional changes in x-aries version:
Note: Video capture & playback (cma problem with or without ksm) mostly working.
In rare condition it need long time to start (5 minutes or more).
You can wait it if you have time (recommended) or simply restart your phone.
build 20140401
Compiled on this HEAD
- Update iniram from 20140331-NIGHTLY
- Enable KSM_CHECK_PAGE
- Enable Advanced TCP Congestion Control
build 20140324 for 20140323-NIGHTLY and newer
- Update iniram from 20140323-NIGHTLY
build 20140319 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
Compiled on this HEAD
- Add 2 patches to improve swap & revert aries-common: zRAM: only read one page at a time.
This time I prefer this kernel doc:
Code:
It is a logarithmic value - setting it to zero means "1 page", setting
it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
Zero disables swap readahead completely.
The default value is three (eight pages at a time). There may be some
small benefits in tuning this to a different value if your workload is
swap-intensive.
Lower values mean lower latencies for initial faults, but at the same time
extra faults and I/O delays for following faults if they would have been part of
that consecutive pages readahead would have brought in.
over aosp guide:
Code:
By default, the Linux kernel swaps in 8 pages of memory at a time.
When using ZRAM, the incremental cost of reading 1 page at a time is negligible and may help in case the device is under extreme memory pressure.
To read only 1 page at a time, add the following to your init.rc:
`write /proc/sys/vm/page-cluster 0`
build 20140313 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
Builded at this HEAD
- Switch cflag from -Og (reverted to -O2 then) to -O3, the kernel size was much bigger & reduce user RAM to 416MB
- Use newer linaro toolchhain 14.02
- Add aries-common: zRAM: only read one page at a time
imo default linux value will give better performance, but I prefer to follow aosp guide like in stock cm.
build 20140311 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
- Add 1100 oc step from mackay and 2 other commits.
build 20140308 for 20140307-NIGHTLY and newer but not SNAPSHOT-M4
- Use initram 0307 nightly with 144 mb zram + minor change to cma & merge android-3.0 aosp
build 20140306
- Add 2 commits to improve swap/zram + ramdisk 0228 nightly with 256 mb zram size (not stable)
build 20140226
- Add 2 commits related to video for linux + merge stock cm-11 & android-3.0 aosp
build 20140214
- Same as aries version + some commits related to memory
build 20140212
- Add s3cfb: tl2796: do not read calibration data on aries from stock cm-11
- Add backport SLUB from Linux 3.3 from Hellybean GT-I9300 + another 4 commits.
build 20140209
- Merge android-3.0 kernel common.
- Enable CLEANCACHE, FRONTSWAP & ZCACHE
- Another CMA try.
build 20140207
- Add BLN & Fast Charge from Semaphore kernel.
Note for BLN: Need to manually rename lights.aries.so.bln in /system/lib/hw/ to lights.aries.so
Rename original file to lights.aries.so.cm or else for backup. Repeat this step in every rom flashing.
- Use newer linaro toolchhain 14.01
- Merge android-3.0 kernel common.
build 20140131
A bunch of patches from faux123, semaphore, codeaurora & linux-next, starting from here till this.
Some part maybe useless and here is the noticeable part:
- Update LMK, CMA and KSM.
- Use LZ4 compressor for zram.
- Add Semaphore Auto Brightness from stratosk (build as a module)
build 20140121
- Add ZRAM_FOR_ANDROID from faux123
- Remove KSM to prevent video recording failure
- Use LZ4 for initram
- Update recovery to Mackay TWRP 2.6.3.0
- Some cherry-pick related to CMA, low memory killer & binder
build 20140111
- Same as aries version exclude merge upstream (already added)
- Replace xvmalloc with zsmalloc for zram
build 20140106
- Same as aries version
build 20140105
- Add pawitp cma-test with 417mb memory (no need bigmem libs) and possible bugs.
- Fix lpm (charging when phone off)
build 20131231
- different boot logo
- add smartass2 cpu gov
build 20131221/22
- 1.32ghz OC step and revert sleep call gpio to prevent SOD
- 397mb memory (install bigmem lib by kasper_h separately for 720k video record fix)
- kernel config for smaller kernel size (mostly taken from semaphore kernel by stratosk)
- merged to aosp android-3.0 kernel common (big changes in wifi driver and interactive gov)
- update gpu driver to DDK [email protected] (as on mackay kernel and others)
- cherry-picked some commits related to zram, lzo and interactive gov
- display boot progress, etc..
Download
http://goo.im/devs/didhiy/aries_cm-11.0
http://goo.im/devs/didhiy/ariesbr_cm-11.0 (I9000B)
tips: check (sort by) modification time to find the latest build
Source:
Kernel
x-aries version
Ramdisk
Credits:
- pawitp
- stratosk
- kasper_h
- derteufel1980
- jugster
- alberto96
- unjustified dev
- all aries variant devs and community
Nice work. I have been looking at the sets of patches needed for Linaro 4.8, but didnt try building one yet.
Last I tried 4.8 was almost 3 months ago, and it didnt boot up, although it build fine.
Would you be willing to add the extra OC steps ( 1100 , 1300 and 1400 ) into the kernel ?
ts1506 said:
Nice work. I have been looking at the sets of patches needed for Linaro 4.8, but didnt try building one yet.
Last I tried 4.8 was almost 3 months ago, and it didnt boot up, although it build fine.
Would you be willing to add the extra OC steps ( 1100 , 1300 and 1400 ) into the kernel ?
Click to expand...
Click to collapse
maybe... right now, I just let it same as stock to see if there's any improvement
just flashed over mackay 4.1.3 and i get better score on antutu, 4985.
keep up good work.
florum said:
just flashed over mackay 4.1.3 and i get better score on antutu, 4985.
keep up good work.
Click to expand...
Click to collapse
thanks for testing & comparing, I think mackay compiled with linaro 4.8 will scored much better
didhiy said:
thanks for testing & comparing, I think mackay compiled with linaro 4.8 will scored much better
Click to expand...
Click to collapse
Wow!! That's amazing. See my score. I never managed to go beyond 4930 in the past.
Can you please describe me what is linaro 4.8 and how does it increase performance.
I flashed bigmem libs for KitKat by Kaspar_h but still got 368 MB of available RAM. Maybe it's my fault, but still curious to know if bigmem libs works on this kernel.
Thanks in advance
Sent from my GT-I9000 using XDA Premium 4 mobile app
Rohitdahiya said:
Wow!! That's amazing. See my score. I never managed to go beyond 4930 in the past.
Can you please describe me what is linaro 4.8 and how does it increase performance.
I flashed bigmem libs for KitKat by Kaspar_h but still got 368 MB of available RAM. Maybe it's my fault, but still curious to know if bigmem libs works on this kernel.
Thanks in advance
Sent from my GT-I9000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you can read the technical details here:
http://gcc.gnu.org/gcc-4.8/changes.html
in short words, it promising better optimization to the codes compiled with it
the memory size was set inside the kernel, installing bigmem libs won't change the size
This kernel is a beast,thank you very much didhiy!
@Rohitdahiya:
You should enable a bigmem setting to make the available amount of RAM bigger.
Flashing only the libs doesn't change the current configuration
Inviato dal mio GT-I9000 utilizzando Tapatalk
thank you for the wonderful kernel please make an option to enable bigmem or atleast 396mb as in case of mackay kernel... thank you
vigneshnallamad said:
thank you for the wonderful kernel please make an option to enable bigmem or atleast 396mb as in case of mackay kernel... thank you
Click to expand...
Click to collapse
I've upload a version with "x-" prefix, bigmem enable (397mb) + 1.32GHz oc steps and some configs changes to make a small kernel (mostly taken from semaphore kernel)
let me know if that version works too
download link was on op
Does this kernel have zram as it's based on stock?
Sent from my GT-I9000 using Tapatalk 4
zakitheracer said:
Does this kernel have zram as it's based on stock?
Sent from my GT-I9000 using Tapatalk 4
Click to expand...
Click to collapse
yes it have zram just like stok
didhiy said:
I've upload a version with "x-" prefix, bigmem enable (397mb) + 1.32GHz oc steps and some configs changes to make a small kernel (mostly taken from semaphore kernel)
let me know if that version works too
download link was on op
Click to expand...
Click to collapse
wow i got 5200 on antutu if u believe in benchmarks... but performance overall is wonderful...
edit : any plans of including smartass v2 and wheatly just a request as of now this is my daily kernel
edit 2 : see the score my phone is ready for android 5.0 with help of u devs
vigneshnallamad said:
wow i got 5200 on antutu if u believe in benchmarks... but performance overall is wonderful...
edit : any plans of including smartass v2 and wheatly just a request as of now this is my daily kernel
edit 2 : see the score my phone is ready for android 5.0 with help of u devs
Click to expand...
Click to collapse
temple run 2 is my only "benchmark" thanks for your nice report
Hope it's stable enough for daily driver too
I use same kernel configuration in sc-02b aries_ntt and epic4g, it's running fine for daily
Guys,
This kernel gives you to put in Mackay Rom 4.1.3 (kk 4.4)?
Thank you for your answers already.
Alexandre_Silva said:
Guys,
This kernel gives you to put in Mackay Rom 4.1.3 (kk 4.4)?
Thank you for your answers already.
Click to expand...
Click to collapse
I don't understand exactly what you mean, but I guess you can flash this kernel on top of mackay cm-11 rom and maybe mackay omni too (tested on my sc-02b only) with caution, mackay setting won't work!
didhiy said:
I don't understand exactly what you mean, but I guess you can flash this kernel on top of mackay cm-11 rom and maybe mackay omni too (tested on my sc-02b only) with caution, mackay setting won't work!
Click to expand...
Click to collapse
in mackay omni rom description kasper h has mentioned about other kernels rom not working... didnt try it yet... will test and report back if works
vigneshnallamad said:
in mackay omni rom description kasper h has mentioned about other kernels rom not working... didnt try it yet... will test and report back if works
Click to expand...
Click to collapse
I've download omni mackay 1217, after comparing initram between omni & stock cm-11 I've found no different except the binaries. Then I flashed that rom & my kernel (which have 1219 cm-11) & it boot fine.
make sure you have a backup & semaphore tar if you wanna try
didhiy said:
I've download omni mackay 1217, after comparing initram between omni & stock cm-11 I've found no different except the binaries. Then I flashed that rom & my kernel (which have 1219 cm-11) & it boot fine.
make sure you have a backup & semaphore tar if you wanna try
Click to expand...
Click to collapse
That's great will give it a try tomo of possible please include smartass v2 in our next version
vigneshnallamad said:
That's great will give it a try tomo of possible please include smartass v2 in our next version
Click to expand...
Click to collapse
no promise, but it's possible
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Recovery
Please use exclusively TWRP for flashing, other recoverys are not supported!
Changelog
cm-11-201503016-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom/Kernel: build with saberemod toolchain 4.8 (credits sparksco)
- Rom: fixed dirty flash way (credits sgspluss)
Download
Unofficial CyanogenMod 11
MiniGapps KK
Credits
@Ziyan as our device maintainer and for the sources and to all other developer who actually work on this device!
Sources
Sure look into GitHub
History
Code:
cm-11-201503014-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom: clean up more apps (credits sgspluss)
- Rom: adblock built in (credits sgspluss)
cm-11-201503013-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom/Kernel: build again with gcc 4.8 toolchain (credits Google)
- Rom: clean up apps and wallpaper (credits sgspluss)
- Rom: replace launcher3 with trebuchet (credits sgspluss)
- Rom: use other aosp keyboard (credits MWisBest)
cm-11-201503010-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom: remove some cm stuff (credits sgspluss)
cm-11-20150308-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom: switch to dlmalloc (credits Ziyan)
- Rom: reenable memory-intensive features (credits sgspluss)
cm-11-20150306-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom: disable memory-intensive features (credits sgspluss)
cm-11-20150305-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom/Kernel: build now with jdk-7 (credits Oracle)
- Rom: back to jemalloc (credits sgspluss)
- Kernel: reenable hdmi mirroring (credits boype)
- Kernel: disable Content Adaptive Brightness by default (credits osm0sis)
cm-11-20150302-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom/Kernel: build now with linaro 4.9 toolchain (credits linaro)
- Rom: update webp to fix graphical glitches in playstore (credits JustArchi)
- Rom: swipe on aosp keyboard fully fixed (credits MWisBest)
- Rom: replace trebuchet with launcher3 and remove unneeded files (credits sgspluss)
- Kernel: add frandom (credits Christopher83)
- Kernel: disable optimization on emmc (credits MWisBest)
cm-11-20150227-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Kernel: add ultra kernel samepage merging (credits boype)
- Kernel: optimized copy page for modern arm platforms (credits hglm)
- Gapps: add missing lib in order to fix aosp keyboard swipe (credits sgspluss)
cm-11-20150223-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom/Kernel: switched to gcc 4.8 toolchain (credits Google)
- Rom: archidroid optimizations v3 (credits JustArchi)
- Kernel: fixed slightly gpu oc (credits sgspluss)
- Kernel: very slightly relax ram timings (credits boype)
cm-11-20150220-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Rom: full ext4 and f2fs support (credits MWisBest, jimsth, Haus1, laufersteppenwolf, rknize)
- Rom: disable ducati h264 (credits sgspluss)
- Kernel: full ext4 and f2fs support (credits arter97, boype)
- Kernel: use standard ram timings (credits sgspluss)
- Gapps: fixed possible problems (credits sgspluss)
cm-11-20150213-UNOFFICIAL-maguro
- Rom/Kernel: synced with latest CyanogenMod 11.0 sources
- Kernel: lower brightness marginally (credits boype)
cm-11-20150209-UNOFFICIAL-maguro
- Rom: switch to dlmalloc (credits Ziyan)
- Kernel: lowered swappiness (credits sgspluss)
- Kernel: reduced logger ram useage (credits sgspluss)
- Kernel: slightly gpu oc (credits sgspluss)
- Kernel: reduce framebuffer size to 12 MB (credits boype)
- Kernel: very slightly relax ram timings (credits boype)
- Kernel: additional safe ram (~50 MB) (credits BigBrother1984)
- Kernel: set row scheduler as default (credits sgspluss)
Why do you find this CM11 build better than other ones?. Advantages?. I'm still interested in good old KK roms .
Thanks for sharing it.
Dont think that this is better as an other one, all roms are quite nice
For example this rom use dlmalloc, has 748MB ram as standart and slightly gpu oc (look changelog)
Give it an try with the small gapps and you will see whats different...
Gesendet von meinem Galaxy Nexus
Hi, is the rom and/or the kernel f2fs-ready?
I'd like to test it as-is, but I'm lazy to go back to ext4 :S.
Have this version problem with Wi-Fi?
Sent from my Galaxy Nexus using XDA Free mobile app
sergialess said:
Hi, is the rom and/or the kernel f2fs-ready?
I'd like to test it as-is, but I'm lazy to go back to ext4 :S.
Click to expand...
Click to collapse
No its only ext4 like stock cm11, i am sorry... But you could try the converter, maybe it will work but haven't try it.
vintermut said:
Have this version problem with Wi-Fi?
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
No problems at all, WiFi works fine here
Gesendet von meinem Galaxy Nexus
Bro, can I use touch2wake with your kernel ? Thanks
If cm kernel supports it then yes otherwise not.
You all have to remember, this rom is pretty close to stock cm11 just with small changes for better user experiances.
Gesendet von meinem Galaxy Nexus
Work on next update has begun, lets see what happens if its finished so stay tuned...
Gesendet von meinem Galaxy Nexus
New build cm-11-20150213-UNOFFICIAL-maguro is online
Gesendet von meinem Galaxy Nexus
sgspluss said:
New build cm-11-20150213-UNOFFICIAL-maguro is online
Gesendet von meinem Galaxy Nexus
Click to expand...
Click to collapse
Does This build had an option to flip to mute/dismiss option? it is really handy feature missed in official CM
madhavs said:
Does This build had an option to flip to mute/dismiss option? it is really handy feature missed in official CM
Click to expand...
Click to collapse
If cm does support it then yes, if not then not.
As i have said, this rom is very close to stock cm 11...
Next version should have fully f2fs support, from rom and kernel sided.
This means everyone could use it, even if you using ext4 or f2fs.
EDIT:
Build are started, takes round about 2 hours.
Lets see if its working...
this rom have a color & gamma setting?!!
massoudsh said:
this rom have a color & gamma setting?!!
Click to expand...
Click to collapse
Yes and yes, same as stock cm11.
BTW:
got an build-error, will fix it and try again.
Lets see if its this time will works.
EDIT:
Kernel side f2fs are building fine, just the rom makes many trouble.
Dont know why, will work localy on that so i am on it...
But dont know when i am finished with it, i am sorry
sgspluss said:
Kernel side f2fs are building fine, just the rom makes many trouble.
Dont know why, will work localy on that so i am on it...
But dont know when i am finished with it, i am sorry
Click to expand...
Click to collapse
Strange because is simple to convert a rom in f2fs with the tool.
Yes with tool is simple that correct, but build it into the rom it isnt so simple.
Wanna make rom and kernel compatible to ext4 and f2fs together, so no needed any more to convert it.
But get error while building, so need to fix it then its ready to go...
Gesendet von meinem Galaxy Nexus
sgspluss said:
Yes with tool is simple that correct, but build it into the rom it isnt so simple.
Wanna make rom and kernel compatible to ext4 and f2fs together, so no needed any more to convert it.
But get error while building, so need to fix it then its ready to go...
Gesendet von meinem Galaxy Nexus
Click to expand...
Click to collapse
Ah ok ok i understand I wait, i'm curious to try this rom. Lollipop is not perfect yet, so i'm searching a "perfect" rom, a rom to keep always in alternative to LL
Worked on it the whole day but could not get it work, we will see tomorrow.
Btw, you need system data and cache in f2fs or just data and cache?
This would be nice to know...
Gesendet von meinem Galaxy Nexus