[Q] My S3 wont update - Sprint Samsung Galaxy S III

I got the notification for the update a few days ago, but my phone wont update.
It's currently on 4.4.2 and I'm not certain what version it's trying to update too.
I took a picture of what happens when I try and update it, and I can provide any more info, just ask

MarlyPaws said:
I got the notification for the update a few days ago, but my phone wont update.
It's currently on 4.4.2 and I'm not certain what version it's trying to update too.
I took a picture of what happens when I try and update it, and I can provide any more info, just ask
Click to expand...
Click to collapse
It's probably the NJ2 update, if your not completely 100% stock unrooted, it will fail.

mattzeller said:
It's probably the NJ2 update, if your not completely 100% stock unrooted, it will fail.
Click to expand...
Click to collapse
Thanks for the quick respond. I rooted it in the past, but I unrooted to update it. Can you point me to any guides that would help me get it back to normal?

MarlyPaws said:
Thanks for the quick respond. I rooted it in the past, but I unrooted to update it. Can you point me to any guides that would help me get it back to normal?
Click to expand...
Click to collapse
Here is the thread for Odin flashable NJ2 tar:
http://forum.xda-developers.com/showthread.php?t=3007847

Related

Was my phone updated??

I think my phone was updated to the newest version from the OTA update....
Can someone post all system info so I can check it out??
go to settings and look for about phone and software info and look at the softwarennumber if u updated it will say 1.32.651.6
My phone still on 1.32.651.1, but when I search for update, it said no update.
Where did you search? via the Android settings program or the HTC thing?
thecalip said:
My phone still on 1.32.651.1, but when I search for update, it said no update.
Click to expand...
Click to collapse
Is your phone rooted? When my phone was rooted it did not find the update, although maybe the timing was coincidental. I went back to stock and then was able to find the update.
spurnout said:
Is your phone rooted? When my phone was rooted it did not find the update, although maybe the timing was coincidental. I went back to stock and then was able to find the update.
Click to expand...
Click to collapse
by rooted you mean the flipzmode ROM or the toast userdebug RUU PCIMG36.zip ?
thecalip; said:
My phone still on , but when I search for update, it said no update.
Click to expand...
Click to collapse
Mine is the same! I cancelled the update, and now I went to check update, it says no update. I am still on original firmware.
its not a firmwar update its a htc update
im on sense 3.0
ugh, any reason for the thread necro?
plz post in proper section: q&a
i like how it goes from 6/4/2010 to just bam today after a whole year it finally gets resurrected haha

[Q] Will I receive t-mobile 4.1.2 update?

I am curious if I will receive the new S3 update, as I am rooted on stock rom. I have not received any update notifications yet, but I know other people that have. Pressing "software update" in settings just waits saying "Checking for software updates". What do I need to do to get the update?
TyIsOwned said:
I am curious if I will receive the new S3 update, as I am rooted on stock rom. I have not received any update notifications yet, but I know other people that have. Pressing "software update" in settings just waits saying "Checking for software updates". What do I need to do to get the update?
Click to expand...
Click to collapse
If you are rooted, my guess is that you most likely tripped the modified counter. By default if you are not using a work around, Samsung has certain methods in place that detect when you modifiy your phone or boot loader. Once tripped, you will most likely not get any ota updates. To check, first ensure that you dont have a yellow exclamation mark while your phone is booting, second, go to settings about phone and there is a string that she either read normal or modified. If you are rooted though, why dont you just flash one of the new roms with android 4.1.2? That is the update.
re: flashing
TyIsOwned said:
I am curious if I will receive the new S3 update, as I am rooted on stock rom. I have not received any update notifications yet, but I know other people that have. Pressing "software update" in settings just waits saying "Checking for software updates". What do I need to do to get the update?
Click to expand...
Click to collapse
Forget waiting for the OTA update, why not download the full Samsung T999 S3 stock-rooted
deoxidized firmware and flash your phone with it. Since your phone is already rooted, it's easy.
Good Luck!
tp2215 said:
If you are rooted, my guess is that you most likely tripped the modified counter. By default if you are not using a work around, Samsung has certain methods in place that detect when you modifiy your phone or boot loader. Once tripped, you will most likely not get any ota updates. To check, first ensure that you dont have a yellow exclamation mark while your phone is booting, second, go to settings about phone and there is a string that she either read normal or modified. If you are rooted though, why dont you just flash one of the new roms with android 4.1.2? That is the update.
Click to expand...
Click to collapse
Misterjunky said:
Forget waiting for the OTA update, why not download the full Samsung T999 S3 stock-rooted
deoxidized firmware and flash your phone with it. Since your phone is already rooted, it's easy.
Good Luck!
Click to expand...
Click to collapse
Yes, it appears I am modified. I used triangle away in the past. I havn't done any phone mods in a long time, and I basically have root for apps requiring SU. I did not want to have to break out the USB cable and download a 700MB file if I could just run the update tool (call me lazy).
re: update
TyIsOwned said:
Yes, it appears I am modified. I used triangle away in the past. I havn't done any phone mods in a long time, and I basically have root for apps requiring SU. I did not want to have to break out the USB cable and download a 700MB file if I could just run the update tool (call me lazy).
Click to expand...
Click to collapse
Well in that case, why not just wait for the OTA update... (you will never see one unless your phone is 100% stock) LOL
Misterjunky said:
Well in that case, why not just wait for the OTA update... (you will never see one unless your phone is 100% stock) LOL
Click to expand...
Click to collapse
Right, I went ahead and updated using cwm and the stock rom and am now on 4.1.2. Flashing was just scary to me when I havnt done it in a very long time
If you wish to do it the easy way I'd say TWRP it. But another way is Odin back to complete stock UVDLJC so that your status is normal and not modified. I'm pretty sure TriangleAway doesn't need to be used to reset your binary for an OTA. Just the ROM itself can't be detected as modified for the OTA to work.
Sent from my SGH-T999 using xda app-developers app
TyIsOwned said:
Right, I went ahead and updated using cwm and the stock rom and am now on 4.1.2. Flashing was just scary to me when I havnt done it in a very long time
Click to expand...
Click to collapse
If you don't mind me asking, how exactly did you go about that? I was on CM, tried changing the rom, messed up, ended going to my backup of touchwiz 4.1.1 and don't mind it but I'd like to go to 4.1.2. I'm a noob at this so if you can help me out that would be awesome. Thank you.
Go to my firmware thread stickied in development. You will find firmware and instruction there.
Sent from my SGH-T999 using xda premium

[Q] Stuck on MA7?

I reverted back to stock hoping for an update since 4.3 is coming out, then checked for updates and phone updated to JZO54K.L900VPAMA7. Now it says my phone is already up to date and it wont even update to MC2. Any suggestions? Phone is now stock, unrooted with stock bootloader.
Someone
Same here, please help us!
chaotic646 said:
I reverted back to stock hoping for an update since 4.3 is coming out, then checked for updates and phone updated to JZO54K.L900VPAMA7. Now it says my phone is already up to date and it wont even update to MC2. Any suggestions? Phone is now stock, unrooted with stock bootloader.
Click to expand...
Click to collapse
Nehemoth said:
Someone
Click to expand...
Click to collapse
Buck1224 said:
Same here, please help us!
Click to expand...
Click to collapse
Did you try going to settings> applications> Google services framework> clear data
Then re checking for updates?
I've installed Cyanogenmod the day before yesterday and today I realize the baseband is still the same MA7, would try with kies and return to original firmware.

4.4.2 OTA trouble?

Hey all,
I caught wind of the 4.4.2 update, so I decided to see how it is. I had used saferoot to gain root access to it, but all I did was use Xposed to modify my phone. No recoveries or anything, and the warranty bit is 0 on the download mode screen. Just to be safe, I wiped data/factory reset to make sure everything was gone, then I started the OTA download. All goes as it should until it reboots to install it, where it gets stuck at 25%, then says "update failed". Phone reboots, and then a window pops up saying the update was interrupted. Anyone else having this issue? Anyone know any workarounds? Because if this phone just won't update, there it no reason for my to keep my warranty bit, since I have less than a week on the warranty left anyhow.
TH3F4LL3N said:
Hey all,
I caught wind of the 4.4.2 update, so I decided to see how it is. I had used saferoot to gain root access to it, but all I did was use Xposed to modify my phone. No recoveries or anything, and the warranty bit is 0 on the download mode screen. Just to be safe, I wiped data/factory reset to make sure everything was gone, then I started the OTA download. All goes as it should until it reboots to install it, where it gets stuck at 25%, then says "update failed". Phone reboots, and then a window pops up saying the update was interrupted. Anyone else having this issue? Anyone know any workarounds? Because if this phone just won't update, there it no reason for my to keep my warranty bit, since I have less than a week on the warranty left anyhow.
Click to expand...
Click to collapse
Did you try re-downloading it?
BWolf56 said:
Did you try re-downloading it?
Click to expand...
Click to collapse
This is my 3rd attempt to re-download it. It's currently at 94%, so I'll let you know how it goes.
TH3F4LL3N said:
This is my 3rd attempt to re-download it. It's currently at 94%, so I'll let you know how it goes.
Click to expand...
Click to collapse
After my 3rd attempt, without my sd card inserted this time, the update failed again! This is starting to get irritating. Maybe I should just flash CM11 or something like that.
TH3F4LL3N said:
After my 3rd attempt, without my sd card inserted this time, the update failed again! This is starting to get irritating. Maybe I should just flash CM11 or something like that.
Click to expand...
Click to collapse
It's kinda odd that it still fails after so many downloads (and so close to being complete).
If there's only a week left to your warranty, you can start looking at custom ROM you might like (AOSP or TW). By the time you find one you really like and understand how to flash it (without any issue), you will have time to give the OTA another shot. Will be some good knowledge reading in the meantime
Little advice: Don't flash a custom ROM while annoyed/mad. That's how 80% of bricks happen.
BWolf56 said:
It's kinda odd that it still fails after so many downloads (and so close to being complete).
If there's only a week left to your warranty, you can start looking at custom ROM you might like (AOSP or TW). By the time you find one you really like and understand how to flash it (without any issue), you will have time to give the OTA another shot. Will be some good knowledge reading in the meantime
Little advice: Don't flash a custom ROM while annoyed/mad. That's how 80% of bricks happen.
Click to expand...
Click to collapse
Ok thanks for the advice, mate. I heard if I take it to Best Buy, they can update it. Do you know if it's free?
TH3F4LL3N said:
Ok thanks for the advice, mate. I heard if I take it to Best Buy, they can update it. Do you know if it's free?
Click to expand...
Click to collapse
Imo it should be but you can always give them a call to make sure.
Just make sure you aren't rooted when going there lol.
BWolf56 said:
Imo it should be but you can always give them a call to make sure.
Just make sure you aren't rooted when going there lol.
Click to expand...
Click to collapse
Haha I know the basics of rooting. If I go, my phone will be the way it is right now: stuck on stock 4.3 with nothing on it but the bloatware from Sammy and AT&T
TH3F4LL3N said:
Haha I know the basics of rooting. If I go, my phone will be the way it is right now: stuck on stock 4.3 with nothing on it but the bloatware from Sammy and AT&T
Click to expand...
Click to collapse
I just noticed that the device status is custom, even though I've wiped data. Is that what is causing this trouble? If so, is there a way to fix it?
Yea when you modify the system at all it trips the modified flag and that's probably where its failing (not the warranty bit flag that's at 0 but the one that's in the system itself) try to Odin to full stock and try it again this should revert it back to official
Sent from my ATT Samsung Galaxy SIII using TapaTalk
TH3F4LL3N said:
I just noticed that the device status is custom, even though I've wiped data. Is that what is causing this trouble? If so, is there a way to fix it?
Click to expand...
Click to collapse
You need to run Triangle Away whiule rooted to change it back to official
audit13 said:
You need to run Triangle Away whiule rooted to change it back to official
Click to expand...
Click to collapse
Will this work for 4.3?
I never tried it on 4.3, only on 4.1.2. Since you have Knox, rooting and installing SU may trip the knox counter. Did you try uninstalling Xposed and running the update?
TH3F4LL3N said:
I just noticed that the device status is custom, even though I've wiped data. Is that what is causing this trouble? If so, is there a way to fix it?
Click to expand...
Click to collapse
crazymonkey05 said:
Yea when you modify the system at all it trips the modified flag and that's probably where its failing (not the warranty bit flag that's at 0 but the one that's in the system itself) try to Odin to full stock and try it again this should revert it back to official
Sent from my ATT Samsung Galaxy SIII using TapaTalk
Click to expand...
Click to collapse
One thing, don't downgrade bootloaders doing so. That will result in a brick.
audit13 said:
I never tried it on 4.3, only on 4.1.2. Since you have Knox, rooting and installing SU may trip the knox counter. Did you try uninstalling Xposed and running the update?
Click to expand...
Click to collapse
I have, and I've wiped the phone at least 3 or 4 times!
BWolf56 said:
One thing, don't downgrade bootloaders doing so. That will result in a brick.
Click to expand...
Click to collapse
How would I go about this? I have the stock 4.1.1 tar file, and I can't get the 4.3 file because AT&T's update was OTA only, and I can't find the 4.3 tar file anywhere!
TH3F4LL3N said:
I have, and I've wiped the phone at least 3 or 4 times!
How would I go about this? I have the stock 4.1.1 tar file, and I can't get the 4.3 file because AT&T's update was OTA only, and I can't find the 4.3 tar file anywhere!
Click to expand...
Click to collapse
Is your current baseband LK3? If so, 4.1.1 should be fine.
BWolf56 said:
Is your current baseband LK3? If so, 4.1.1 should be fine.
Click to expand...
Click to collapse
I am in the about device section of the settings, and it says the baseband version is I747UCUEMJB. Is this the right one?
TH3F4LL3N said:
I am in the about device section of the settings, and it says the baseband version is I747UCUEMJB. Is this the right one?
Click to expand...
Click to collapse
That would be the 4.3. You can't downgrade from those bootloaders. Therefor, you need stock 4.3
BWolf56 said:
That would be the 4.3. You can't downgrade from those bootloaders.
Click to expand...
Click to collapse
Well that's just great. I'm stuck on 4.3. Could I possibly flash something like CM11 to get to kitkat? Of course, I'd like to back up the stock rom in case something goes wrong, but it would be wonderful if I could use CM on my phone again! I used the saferoot method to gain root access in the first place, which disabled KNOX if that means anything.
TH3F4LL3N said:
Well that's just great. I'm stuck on 4.3. Could I possibly flash something like CM11 to get to kitkat? Of course, I'd like to back up the stock rom in case something goes wrong, but it would be wonderful if I could use CM on my phone again! I used the saferoot method to gain root access in the first place, which disabled KNOX if that means anything.
Click to expand...
Click to collapse
Yes you can, it's fairly simple too. Just gotta follow their instructions (don't skip anything).
As for recovery, I recommend TWRP, which you can get on the Play Store.

[Q] Cannot do OTA 4.4 update on AT&T SGHi317 Note 2

Guys I am at wit's end. I have an AT&T Galaxy Note 2 SGH-i317 with Android 4.3. It is rooted.
Ever since the AT&T OTA 4.4 update came out last June 2014, my phone informs me that "New Software Available" for OTA downloading..I click INSTALL and it starts downloading & installing it, but always fails at about 30% or so.
I'm confused...do I need to first UNROOT the phone back to stock ROM and then do the OTA update to 4.4 and then re-root?
This update keeps popping up all the time and it always fails.
TY!
jbcoop said:
Guys I am at wit's end. I have an AT&T Galaxy Note 2 SGH-i317 with Android 4.3. It is rooted.
Ever since the AT&T OTA 4.4 update came out last June 2014, my phone informs me that "New Software Available" for OTA downloading..I click INSTALL and it starts downloading & installing it, but always fails at about 30% or so.
I'm confused...do I need to first UNROOT the phone back to stock ROM and then do the OTA update to 4.4 and then re-root?
This update keeps popping up all the time and it always fails.
TY!
Click to expand...
Click to collapse
If you're rooted, then just use titanium backup (or equivalent) to freeze the software update application.
getyroks said:
If you're rooted, then just use titanium backup (or equivalent) to freeze the software update application.
Click to expand...
Click to collapse
Here...
getyroks said:
Here...
Click to expand...
Click to collapse
Thank you...I appreciate it.
jbcoop
jbcoop said:
Thank you...I appreciate it.
jbcoop
Click to expand...
Click to collapse
Just here to help.

Categories

Resources