Develop Bugs

Why I can not install cm 12 cyanogenmod

Hello all
Why I can not install cm 12 cyanogenmod
But I cant even return the backup to two Is it helps me to solve this issue
Note that the boot loader is open and I have to root
Thanks

Is it one help me in solving this problem
Sorry Aatkelm English well

muhamadalani said:
Hello all
Why I can not install cm 12 cyanogenmod
But I cant even return the backup to two Is it helps me to solve this issue
Note that the boot loader is open and I have to root
Thanks
Click to expand...
Click to collapse
Do you have an error ? what's the issue? What recovery are you using?

the_Victorian said:
Do you have an error ? what's the issue? What recovery are you using?
Click to expand...
Click to collapse
Recovery is win recovery project v 2.8.1.0
When the installation is waiting a bit and then works Ribot
Note and put the installation zip on the internal memory and the external memory file and did not benefit the process
Note the same process I've found with cm 11 cyanogenmod
Unfortunately, because the English Lit good

muhamadalani said:
Recovery is win recovery project v 2.8.1.0
When the installation is waiting a bit and then works Ribot
Note and put the installation zip on the internal memory and the external memory file and did not benefit the process
Note the same process I've found with cm 11 cyanogenmod
Unfortunately, because the English Lit good
Click to expand...
Click to collapse
Don't worry, I can understand you. Because cm12 is a new version of android from 4.4, you need to have a special recovery. Off you read his first post on the cm12 forum, it says you need to use the one he linked, which is Clockworkmod 2.5.x I believe (I may be mistaken) just download the recovery he linked with adb and it should work fin! When you flash, it gives you an error, but ignore it it still flashed successfully.
Best of luck,
The_Victorian

sucess
but NFC IS NOT FUNCTION!!!!!!!!

jaketsao said:
but NFC IS NOT FUNCTION!!!!!!!!
Click to expand...
Click to collapse
That's a bug currently, yes.

the_Victorian said:
Don't worry, I can understand you. Because cm12 is a new version of android from 4.4, you need to have a special recovery. Off you read his first post on the cm12 forum, it says you need to use the one he linked, which is Clockworkmod 2.5.x I believe (I may be mistaken) just download the recovery he linked with adb and it should work fin! When you flash, it gives you an error, but ignore it it still flashed successfully.
Best of luck,
The_Victorian
Click to expand...
Click to collapse
I could not do a thing for the same problem I can not anticipate what the installation did not understand you Can you provide photographic and installation kits as well and not something
Thank you for your understanding me

Stuck after Install Rom

Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?

alexis333 said:
Hello to everyone ,
i installed miui v6 to my M8 and after that i cant flash any other rom.
I install a new rom from zip but after the reboot it stucks on the first screen of the new rom.
Waited for 3 hours but nothing.
What do you suggest ?
Click to expand...
Click to collapse
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)

Simple answer.
No.
Now what ?

Husky34 said:
simple question, do you flashed the boot.img inside the rom using fastboot?(fastboot flash boot boot.img)
Click to expand...
Click to collapse
This isn't normally required on the M8, unless its some quirk specific to MIUI (which is a ROM I don't a have much knowledge of).
Make sure your TWRP version is up to date.
Make sure your hboot is up to date.
Wipe user data and cache (default wipe in TWRP) before flashing the ROM.
Those are the most common reasons for no boot after flashing multiple ROMs.

I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?

alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
That may be the issue right there. I know some folks are still using it, but Philz hasn't been updated in a long time. And since some newer ROMs have issues with older TWRP builds, I would assume the same would be true with Philz.
You can get TWRP here: https://dl.twrp.me/m8/

alexis333 said:
I dont use TWRP. I use Philz Touch recovery.
Where can i download latest TWRP ?
Click to expand...
Click to collapse
https://twrp.me/devices/htconem8gsm.html

I flashed TPWR and then flashed the new ROM and everything ok.
Thanx for your help men ..

alexis333 said:
Thanx for your help men ..
Click to expand...
Click to collapse
There's a button for that.
Happy it worked for you.

Oppo find 7a cant get into fastboot or recovery

Hi everyone, I'm in major trouble right now.
I just flashed a modem package from this link
https://www.androidfilehost.com/?fid=23578570567721897
and now I cant get to recovery or fastboot and of course cant boot up. Caan anyone help?
I flash using nameless latest twrp and my rom is Omni 6.0 test build.

Hey I have one problem here..
Im using oppo find7a Android 5.0 color os 2.1.5..
Already root using kingroot..
I want to flash to other os like cyanogen, gummybaer, miui etc
I follow all the step on many video on YouTube using TWRP ..
After I flash twrp recover img and reboot, it stuck on fastboot menu
It cannot enter the recovery menu
How do I solve this problem so I can do wipe cache and flash other os
Some people say I must unlock the bootloader so that I can enter TWRP recovery menu

Shouheng said:
Hi everyone, I'm in major trouble right now.
I just flashed a modem package from this link
https://www.androidfilehost.com/?fid=23578570567721897
and now I cant get to recovery or fastboot and of course cant boot up. Caan anyone help?
I flash using nameless latest twrp and my rom is Omni 6.0 test build.
Click to expand...
Click to collapse
Hello, almost the same happend to me.....flashed modem package on nameless ROM.
After reboot, the phone si completely dead.
No vibration, no fastboot, no recovery.....
Did you manage somehow to solve this????
EDIT: found this guide and it works http://community.oppo.com/en/forum.php?mod=viewthread&tid=23067&extra=

tw9 said:
Hello, almost the same happend to me.....flashed modem package on nameless ROM.
After reboot, the phone si completely dead.
No vibration, no fastboot, no recovery.....
Did you manage somehow to solve this????
EDIT: found this guide and it works http://community.oppo.com/en/forum.php?mod=viewthread&tid=23067&extra=
Click to expand...
Click to collapse
What's your device model name? After unbrick mobile data working fine?

My device is X9006 and on latest Nameless nightly everything is ok.

tw9 said:
My device is X9006 and on latest Nameless nightly everything is ok.
Click to expand...
Click to collapse
Can you give me like of drivers? I used one in unbrick tool but it is not getting installed

I have no other drivers than those in the unbrick thread.
There is also a process of installing them described, which is tricky, because the drivers are not digitally signed.
If you are on windows 7, you must put them in test mode....don't know how it is with other versions of windows, because I used my older machine with W7 for unbricking.
It is all there, in the unbrick thread.....If I remember correctly....

tw9 said:
I have no other drivers than those in the unbrick thread.
There is also a process of installing them described, which is tricky, because the drivers are not digitally signed.
If you are on windows 7, you must put them in test mode....don't know how it is with other versions of windows, because I used my older machine with W7 for unbricking.
It is all there, in the unbrick thread.....If I remember correctly....
Click to expand...
Click to collapse
Finally unbrciked the device using that guide and after some workarounds got 3g working. But the biggest problem I am facing now is. I am stuck in stock 1.2..5i with twrp 2.7.0 can't old backup are not showing in recovery also can't flash anything. No system update. Flashing nameless Rom latest results in updater script error. Tried flashing latest twrp but it will reboot to system every time I try to boot into recovery. Sorry for my bulky English.

Yes, this exact problem I had also to face.
And I don't remember it exactly, but If I'm not mistaken, I flashed the original ColorOS recovery, did some updates and finally then I ended up with ColorOS 2.1.5i, I think.....
From that point TWRP recoveries worked alright, even the newest versions.
If you managed to unbrick your device, this is piece of cake, just remember - you need original ColorOS recovery firstly.

tw9 said:
Yes, this exact problem I had also to face.
And I don't remember it exactly, but If I'm not mistaken, I flashed the original ColorOS recovery, did some updates and finally then I ended up with ColorOS 2.1.5i, I think.....
From that point TWRP recoveries worked alright, even the newest versions.
If you managed to unbrick your device, this is piece of cake, just remember - you need original ColorOS recovery firstly.
Click to expand...
Click to collapse
Thank you for your reply mate. Now flashed cm13 nightly using 2.8.4 I will be selling this phone ASAP. This fourm is almost inactive.

OP3 - Nethunter - "Unpacking boot image failed"

Hi there,
I wanted to install the latest image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP I keep getting the message : "Unpacking boot image failed" in the log screen.
What I did in order:
- Unlock fastboot mode
- Flash TWRP recovery (found on build.nethunter.com/twrp)
- Reboot on TWRP
- Install kernel ( kernel-nethunter-oneplus3-nougat-3.15.4-20170126-2226 )
- Install ROM ( nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604 )
- Reboot
It is when I install the rom that I get the error message "Unpacking boot image failed". Even if at the end it says "install completed - Success", it keep loading (with the nethunter loading screen) indefinitely...
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.

Aiscargeauh said:
Hi there,
I wanted to install the last image of Nethunter (found on build.nethunter.com/nightly) but when I install it with TWRP (found on build.nethunter.com/twrp) I keep getting the message : "Unpacking boot image failed" in the log screen.
I tried many differents versions of TWRP and even different builds of Nethunter, I found nothing on the net, so what should I do ?
Should I post an issue on the kali-nethunter github ?
Hope you have some ideas of what I can try...
However if you need any other information (log file ...), tell me what.
Click to expand...
Click to collapse
What ROM are you using?
Last time i installed it i was on OOS 3.2.2. You have to flash kernel and then the big file (generic nethunter.....)
Found that in https://forum.xda-developers.com/showpost.php?p=68451978&postcount=6
It worked perfectly but since 3.2.2 i havent touched it again so not sure what rom is compatible atm

fuarkgl3 said:
What ROM are you using?
Click to expand...
Click to collapse
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.

Aiscargeauh said:
I'm trying with the "nethunter-generic-armhf-kalifs-minimal-rolling-3.15.4-20170202-1604.zip"
Also tried with the full version, instead of minimal but same result.
Click to expand...
Click to collapse
I mean version of OOS, not nethunter overlay. See my screenshot. You have to download one of the following kernels depending if you are on MM or nougat. Flash it before flashing the nethunter overlay

fuarkgl3 said:
I mean version of OOS, not nethunter overlay
Click to expand...
Click to collapse
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.

Aiscargeauh said:
I'm trying with the latest OTA version, so actually the 4.0.2.
I also installed the kernel before, I'm gonna edit my first post with informations on what I did.
Click to expand...
Click to collapse
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?

fuarkgl3 said:
Ok i just read it. And it seems strange indeed. Will try to install it today since i use also oos 4.0.2 and will report back asap
Just out of curiosity what twrp are you using?
Click to expand...
Click to collapse
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html

Aiscargeauh said:
Thank's for the support anyway
I'm using the TWRP provided by Nethunter on build.nethunter.com/twrp/oneplus/
Also tried with official 3.0.3 for the OnePlus 3 from twrp.me/devices/oneplusthree.html
Click to expand...
Click to collapse
Got it working. Only problem is i dont find the option to enable OTG-USB lol

fuarkgl3 said:
Got it working. Only problem is i dont find the option to enable OTG-USB lol
Click to expand...
Click to collapse
And I'm here sitting with my error and my infinite boot, lol.
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.

Aiscargeauh said:
Can you please put the installation process you did ? With the files you used ?
I'm getting my phone to full-stock.
Click to expand...
Click to collapse
Sure. Just give me time to post what i did, currently restoring my nandroid because something went wrong when updating metapackages, so im going to download full version instead of minimal and enable OGT-USB to check if wifite works. I will post the steps asap :good:
meanwhile..... how the **** do i enable usb-otg? i dont find the option in settings/storage/3dot
Good and bad news: OTG does not work (it worked for me on MM) but nethunter runs "well" ... it stucks while rebooting and some weird things more. It runs laggy as well...
Steps and config i have
-Experience ROM v10.1(oos 4.0.2 with some adds) and custom TWRP by blu_spark v14
1-Download these 2 files from https://build.nethunter.com/nightly/3.15.4-20170202-1604/
-kernel-nethunter-oneplus3-nougat-3.15.4-20170202-1604.zip
-nethunter-generic-arm64-kalifs-full-rolling-3.15.4-20170202-1604.zip
2-Reboot to recovery and install nethunter-generic-arm64.....
3-Not sure if you have to reboot and then install kernel but i flashed nethunter+kernel without rebooting to system
4-Reboot to system and open supersu, then open nethunter app and grant superuser permissions
5-Done.
I Dont really know why my external adapter or pendrive are not recognized, because it did in MM with same hardware lol. Maybe now only works with official usb-c adapter, who knows

I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?

Aiscargeauh said:
I will try this when I can, but it is close to what I already did.
I will edit this post when done.
I seen that you used the arm64 version, perhaps the problem is that I use the armhf ?
Click to expand...
Click to collapse
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2

fuarkgl3 said:
may be, but im not sure. Finally got USB-OTG working but it runs very laggy and dont find any network. So problem is nh build or oos 4.0.2
Click to expand...
Click to collapse
Do you think flashing another ROM before flashing nh-generic will help ?

Aiscargeauh said:
Do you think flashing another ROM before flashing nh-generic will help ?
Click to expand...
Click to collapse
Dont think so. But latest build i installed NH i didnt use arm64 version but armhf. So maybe try what i did but using custom TWRP by blu_spark v14 and armhf.... im not sure
Tested with 2 antennas and result is the same in both (see SS)

My GX8 is starting TWRP automatically at every start

Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx

dg89 said:
Hey guys,
i had CM13 on my phone an i wanted to try a new rom. So i did all the steps like it is written in the thread. After i used the wipe function my phone is always starting in twrp and i cant install a new rom and i also can't update my twrp.
Is my phone now ****ed up or can i do anything to save?
Thx
Click to expand...
Click to collapse
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79

tiklmypikl said:
You should be able to boot to bootloader if it's the same problem I have. You can then either flash the stock recovery or this version of TWRP which should fix the problem; https://forum.xda-developers.com/showpost.php?p=70296158&postcount=79
Click to expand...
Click to collapse
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working

dg89 said:
thank you but its not working. i can't install the new version twrp and i also tried to install cm13 again and it is not working
Click to expand...
Click to collapse
What verison of TWRP are you on?

tiklmypikl said:
What verison of TWRP are you on?
Click to expand...
Click to collapse
right now it is on v2.8.7.0 and i tried to install the new version but it's not working