Develop Bugs

[Recovery]Clockworkmod-5.x.x.x

Hi all.
I was trying to find out if we could get the latest CWM on our hero's, with no luck..
So i decided to build it from cyanogen and share it with everyone
Just download and flash the zip file in recovery.
DISCLAIMER: I AM NOT RESPONSIBLE FOR BRICKED DEVICES, FLASH AT YOUR OWN RISK!
The link:
http://www.mediafire.com/download.php?wbw6ewqadln2jpi
SANSYF version 5.0.2.8:
http://dl.xda-developers.com/attach...4/4/8/8/3/recovery-clockworkmod-v-5-0-2-8.zip
New properly working version 5.5.0.4! Download attatchment and flash in recovery

Hi did you use it: http://builder.clockworkmod.com/
If yes your recovery will work, yesterday I've try the site and it work

SANSYF said:
Hi did you use it: http://builder.clockworkmod.com/
If yes your recovery will work, yesterday I've try the site and it work
Click to expand...
Click to collapse
haha yeah, I just thought I'd share it with everyone

no worry, it work , there the main
I'am trying to compile TWRP from source but can't do it , missing touch libs - -'

SANSYF said:
no worry, it work , there the main
I'am trying to compile TWRP from source but can't do it , missing touch libs - -'
Click to expand...
Click to collapse
They got it working on the cdma, maybe we can port the libs to our device?

Some month ago I have compile clockworkmod recovery from my computer source and could have "power off" support and correct "partition SD card" option.
It's 5.0.2.8 version. Could you just post it in your thread with my name please ?
"They got it working on the cdma, maybe we can port the libs to our device? "
I don't think ,that was the old version 1.x of the recovery without touch.
I try to compile 2.x version :/

Clockworkmod Recovery v5.8.4.3
its working thanks so much

thank

Wow! It work! Lol. Thanks youuuuuuuuuuuuuuuuuuuu! Love it :good:

I've flashed the Clockworkmod-5.8.4.3 recovery but there's one problem : When I go into recovery, there is an error involving the ext partitions so it doesn't recognise them. Can't make a nandroid backup too because of that. Am I the only one with this problem?

Ciprilik said:
I've flashed the Clockworkmod-5.8.4.3 recovery but there's one problem : When I go into recovery, there is an error involving the ext partitions so it doesn't recognise them. Can't make a nandroid backup too because of that. Am I the only one with this problem?
Click to expand...
Click to collapse
You're not alone same here too

Ciprilik said:
I've flashed the Clockworkmod-5.8.4.3 recovery but there's one problem : When I go into recovery, there is an error involving the ext partitions so it doesn't recognise them. Can't make a nandroid backup too because of that. Am I the only one with this problem?
Click to expand...
Click to collapse
I'll see if I can fix them tonight

New fixed version is up with tweaks from the hero cdma and it has LV1.2 kernel from reimervdzee.
Download the atatchment from the first post
Enjoy!

you mean it flashes LV 1.2 when you are flashing the recovery ?

Ciprilik said:
you mean it flashes LV 1.2 when you are flashing the recovery ?
Click to expand...
Click to collapse
No, the recovery.img contains a kernel, I just replaced it with LV1.2.
Also this version supports aroma touch screen

This is just amazing!!!!
Aroma installer with touch is absolutely...impossible to describe!!
it's the first time since a while that we have a major improvement on the reco
congrats!!

lolo7291 said:
This is just amazing!!!!
Aroma installer with touch is absolutely...impossible to describe!!
it's the first time since a while that we have a major improvement on the reco
congrats!!
Click to expand...
Click to collapse
No problem

Indeed, working great...:good:

Thanks, works great indeed!

If I didn't hated so much CWM, I'll be flashing this ASAP.
Nevertheless, great work!

dualrecovery not working after using EasyRootTool ?

Hello folks,
I just spend a couple of hours trying to get some new software on my Z1C. My inital plan was to flash PA 4.4 final, but that didn't really work out. Here's what happend:
1) I received the 108 update OTA. I used EasyRootTool ( ht tp://forum.xda-developers.com/showthread.php?t=2784900) with option 2 to regain root access. That seemed to work so far. Afterwards I tried to installed lockeddualrecovery using the Z1C-lockeddualrecovery2.7.129-BETA.installer, and here things started to get strange. I couldn't boot into CWM, so I made a backup using TWRP.
2) I unlocked my bootloader
3) I flashed PA following the instructions given in the thread: ht tp://forum.xda-developers.com/showthread.php?t=2764775
4) I was stuck with a bootloop, showing the PA start screen.
So I tried to roll back using the TWRP backup I made before unlocking the bootloader, but TWRP won't recognize the backup. I tried putting it in a folder named TWRP, directly into the root folder, interal SD, external SD...all the same, it just doesn't show up. I also can't install one of my older CWM backups, as trying to boot into CWM leads to a bootloop showing the "SONY" screen.
So I decided to flash a stock ROM (D5503_14.4.A.0.108_GenericDE_(1279-6978)) using flashtool and repeated the procedure. Again, I'm stuck with a TWRP that won't recognize its own backup and a broken CWM. Same if I start with D5503_14.3.A.0.757_GenericDE_(1279-6978).
Finally I managed to install CWM using the older version Z1C-lockeddualrecovery2.7.128-BETA.installer.zip. My question therefore: Was I doing something wrong or could this be a bug in Z1C-lockeddualrecovery2.7.129-BETA.installer.zip?

matt.s said:
Hello folks,
My question therefore: Was I doing something wrong or could this be a bug in Z1C-lockeddualrecovery2.7.129-BETA.installer.zip?
Click to expand...
Click to collapse
It`s a bug, you didn´t made something wrong!

czrtst said:
It`s a bug, you didn´t made something wrong!
Click to expand...
Click to collapse
Thanks, so if I'm using Z1C-lockeddualrecovery2.7.128-BETA and follow the instructions from the PA 4.4 thread, it shouldn't matter if I come from 108 or 757 right? Right now I'm on 757, so I would prefer to upgrade from here straight to PA 4.4

czrtst said:
It`s a bug, you didn´t made something wrong!
Click to expand...
Click to collapse
I have the same problem. Somebody tried it with new version (Z1C-lockeddualrecovery2.7.130-BETA.installer)?

lovasjoe said:
Somebody tried it with new version (Z1C-lockeddualrecovery2.7.130-BETA.installer)?
Click to expand...
Click to collapse
Doesn`t work with CWM:
http://forum.xda-developers.com/showpost.php?p=53783354&postcount=2378

Use 128 beta and you'll be fine. 129 didn't work for me either.

crótach said:
Use 128 beta and you'll be fine. 129 didn't work for me either.
Click to expand...
Click to collapse
It works with Z1C-lockeddualrecovery2.7.132-BETA! :laugh:

lovasjoe said:
It works with Z1C-lockeddualrecovery2.7.132-BETA! :laugh:
Click to expand...
Click to collapse
confirm Z1C-lockeddualrecovery2.7.132-BETA

Oppo find 7a cant get into fastboot or recovery

Hi everyone, I'm in major trouble right now.
I just flashed a modem package from this link
https://www.androidfilehost.com/?fid=23578570567721897
and now I cant get to recovery or fastboot and of course cant boot up. Caan anyone help?
I flash using nameless latest twrp and my rom is Omni 6.0 test build.

Hey I have one problem here..
Im using oppo find7a Android 5.0 color os 2.1.5..
Already root using kingroot..
I want to flash to other os like cyanogen, gummybaer, miui etc
I follow all the step on many video on YouTube using TWRP ..
After I flash twrp recover img and reboot, it stuck on fastboot menu
It cannot enter the recovery menu
How do I solve this problem so I can do wipe cache and flash other os
Some people say I must unlock the bootloader so that I can enter TWRP recovery menu

Shouheng said:
Hi everyone, I'm in major trouble right now.
I just flashed a modem package from this link
https://www.androidfilehost.com/?fid=23578570567721897
and now I cant get to recovery or fastboot and of course cant boot up. Caan anyone help?
I flash using nameless latest twrp and my rom is Omni 6.0 test build.
Click to expand...
Click to collapse
Hello, almost the same happend to me.....flashed modem package on nameless ROM.
After reboot, the phone si completely dead.
No vibration, no fastboot, no recovery.....
Did you manage somehow to solve this????
EDIT: found this guide and it works http://community.oppo.com/en/forum.php?mod=viewthread&tid=23067&extra=

tw9 said:
Hello, almost the same happend to me.....flashed modem package on nameless ROM.
After reboot, the phone si completely dead.
No vibration, no fastboot, no recovery.....
Did you manage somehow to solve this????
EDIT: found this guide and it works http://community.oppo.com/en/forum.php?mod=viewthread&tid=23067&extra=
Click to expand...
Click to collapse
What's your device model name? After unbrick mobile data working fine?

My device is X9006 and on latest Nameless nightly everything is ok.

tw9 said:
My device is X9006 and on latest Nameless nightly everything is ok.
Click to expand...
Click to collapse
Can you give me like of drivers? I used one in unbrick tool but it is not getting installed

I have no other drivers than those in the unbrick thread.
There is also a process of installing them described, which is tricky, because the drivers are not digitally signed.
If you are on windows 7, you must put them in test mode....don't know how it is with other versions of windows, because I used my older machine with W7 for unbricking.
It is all there, in the unbrick thread.....If I remember correctly....

tw9 said:
I have no other drivers than those in the unbrick thread.
There is also a process of installing them described, which is tricky, because the drivers are not digitally signed.
If you are on windows 7, you must put them in test mode....don't know how it is with other versions of windows, because I used my older machine with W7 for unbricking.
It is all there, in the unbrick thread.....If I remember correctly....
Click to expand...
Click to collapse
Finally unbrciked the device using that guide and after some workarounds got 3g working. But the biggest problem I am facing now is. I am stuck in stock 1.2..5i with twrp 2.7.0 can't old backup are not showing in recovery also can't flash anything. No system update. Flashing nameless Rom latest results in updater script error. Tried flashing latest twrp but it will reboot to system every time I try to boot into recovery. Sorry for my bulky English.

Yes, this exact problem I had also to face.
And I don't remember it exactly, but If I'm not mistaken, I flashed the original ColorOS recovery, did some updates and finally then I ended up with ColorOS 2.1.5i, I think.....
From that point TWRP recoveries worked alright, even the newest versions.
If you managed to unbrick your device, this is piece of cake, just remember - you need original ColorOS recovery firstly.

tw9 said:
Yes, this exact problem I had also to face.
And I don't remember it exactly, but If I'm not mistaken, I flashed the original ColorOS recovery, did some updates and finally then I ended up with ColorOS 2.1.5i, I think.....
From that point TWRP recoveries worked alright, even the newest versions.
If you managed to unbrick your device, this is piece of cake, just remember - you need original ColorOS recovery firstly.
Click to expand...
Click to collapse
Thank you for your reply mate. Now flashed cm13 nightly using 2.8.4 I will be selling this phone ASAP. This fourm is almost inactive.

[Guidance] SGH-T989 UPDATING ISSUE!

Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.

Did you follow the instructions to flash TWRP using Odin?

olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear

bump

Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1

aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?

N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.

N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.

markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post

aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!

N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.

[TUTORIAL][ROM][CM14.1] OFFICIAL CyanogenMod 14.1 for Android One 2nd Gen on WF Swift

Due to a number of reports of people bricking their devices, I have removed this tutorial.
For instructions to get your device unbricked, please read here.
I'm terribly sorry for the inconvenience.

Hello,
thanks for sharing, but do you also know a way back to wileyfox stock rom? I don't think a twrp backup holds all nand data. When flashing GM4G rom, you also flash ie. modem partition, and I don't think that this is covered by a twrp backup.
bye...DonQ

Seed has a TWRP patched for cm updater. I'm a seed user but I prefer crackling roms

DonQuichotte said:
Hello,
thanks for sharing, but do you also know a way back to wileyfox stock rom? I don't think a twrp backup holds all nand data. When flashing GM4G rom, you also flash ie. modem partition, and I don't think that this is covered by a twrp backup.
bye...DonQ
Click to expand...
Click to collapse
Flash the factory image.

[email protected] said:
Seed has a TWRP patched for cm updater. I'm a seed user but I prefer crackling roms
Click to expand...
Click to collapse
I can't find a link for the Seed TWRP patched for CM Updater. Can you share it?

seb5049 said:
I can't find a link for the Seed TWRP patched for CM Updater. Can you share it?
Click to expand...
Click to collapse
Yeah I would like to know too

VivaLaVent said:
Flash the factory image.
Click to expand...
Click to collapse
I'm not sure this is enough, cause with the GM4G rom some partitions (.img) get flashed, that are not in the swift factory rom...oem.img, devinfo.bin. I think about switching to seed, cause no more nigthlies and seed has official CM14.1 already. But there has to be a bullet-proof way to return to stock...just in case.
bye DonQ

twrp patched by Arvin Quilao
VivaLaVent said:
Yeah I would like to know too
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=457095661767122264 i use this and updated via cm updater twice with no problem....

[email protected] said:
https://www.androidfilehost.com/?fid=457095661767122264 i use this and updated via cm updater twice with no problem....
Click to expand...
Click to collapse
Okay so I'm guessing updating with CM updater does work, but the recovery you linked is not the latest version of TWRP.

Hello, I've tried to flash this rom General Mobile 4G (seed) and it finishes OK, but device does not restart ( brick but USB COM port detected), I've reinserted the battery and device does not turn on, googled a bit, and used qualcomm flash tool to unbrick my wileyfox.
What am I doing wrong here ?
I've also tried with GM_4G_7.0_NRD90R_FASTBOOT_STOCK_ROM_BY_TURKDEVS same problem device is bricked
Also I've tried from stock Cynogen OS (12.1-YOG4PAS33J) but same result device bricked
PS. downloaded files are ok, not corrupted....

Twrp version status...
VivaLaVent said:
Okay so I'm guessing updating with CM updater does work, but the recovery you linked is not the latest version of TWRP.
Click to expand...
Click to collapse
Yeahhh it isnt the latest i know. The latest is 3.0.2-1 but isnt patched for cm ota updates like that shared by me later. The dev stated the official version patched from twrp website will come later. Using it dnt create any prblm.

piromanneo said:
Hello, I've tried to flash this rom General Mobile 4G (seed) and it finishes OK, but device does not restart ( brick but USB COM port detected), I've reinserted the battery and device does not turn on, googled a bit, and used qualcomm flash tool to unbrick my wileyfox.
What am I doing wrong here ?
I've also tried with GM_4G_7.0_NRD90R_FASTBOOT_STOCK_ROM_BY_TURKDEVS same problem device is bricked
Also I've tried from stock Cynogen OS (12.1-YOG4PAS33J) but same result device bricked
PS. downloaded files are ok, not corrupted....
Click to expand...
Click to collapse
I'm having the same problem.

seb5049 said:
I'm having the same problem.
Click to expand...
Click to collapse
I'm starting to think I made an error, can anyone confirm they successfully used this method?

VivaLaVent said:
I'm starting to think I made an error, can anyone confirm they successfully used this method?
Click to expand...
Click to collapse
I was unsuccessful with your method. I even tried two times then I gave up and restored my backup with cm-13

How is it running on CM 14? Is there noticeable lag and such?

If you want CM14, try crDroid, it works great. I'm using it for two weeks now, no FC errors, good battery performance, no serious lags.
When I read the bricks of some users trying to flash a ROM that is meant for a clone with ALMOST the same hardware - I won't try this.

I am considering doing this update. But I have an issue. Since Android 6 has integrated sdcards, I had to reformat the sdcard on every update which is a pain in the ass. I using mixed mode. Is there any way to do an update which allows to reintegrate the sdcard without reformatting the sdcard?

piromanneo said:
Hello, I've tried to flash this rom General Mobile 4G (seed) and it finishes OK, but device does not restart ( brick but USB COM port detected), I've reinserted the battery and device does not turn on, googled a bit, and used qualcomm flash tool to unbrick my wileyfox.
What am I doing wrong here ?
I've also tried with GM_4G_7.0_NRD90R_FASTBOOT_STOCK_ROM_BY_TURKDEVS same problem device is bricked
Also I've tried from stock Cynogen OS (12.1-YOG4PAS33J) but same result device bricked
PS. downloaded files are ok, not corrupted....
Click to expand...
Click to collapse
I seem to have the same problem as you, device doesn't respond, no boot or whatever.
Could you link me to the solution you used to unbrick the device?

Due to a number of reports of people bricking their devices, I have removed this tutorial.
For instructions to get your device unbricked, please read here.
I'm terribly sorry for the inconvenience.