dear dev, i need help about note3 neo n750s. during update to 4.4, bad flash, now it stuck on samsung logo.when i try to flash again, it says no partition, so i need pit file for repartitioning of n750s.kindly upload it, so that my phone could work again, i need it badly, plz
Related
Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
umaga2012 said:
Guys sorry for posting this here but I'm really desperate and I need your help. I flashed 4.2.2 firmware on GT i9082 and I forgot to check the "F reset " button on Odin.The firmware flashed to completion and I saw the"pass" message. However the phone cannot boot now and the Samsung logo goes on and off when I try to boot the phone. When I boot into download mode it shows something like this "current eMMc version !!!!!!!!" in red color. I tried flashing the same firmware via Odin but it fails and says "no pit partition".The firmware is a single md5.I'm unable to enter into recovery mode either so I cannot perform a hard reset. Is the phone hard bricked? Please help I'm really desperate. Thanks
Click to expand...
Click to collapse
did you put the .pit file?
I flashed a file with a single package through PDA
Sent from my GT-I8190 using XDA Free mobile app
Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Hi,
This thread is being moved to your own dedicated forum, where the experts may be able to help you better.
Good luck!
benzomarie said:
Hi all !
So two days ago i wanted to update my Sm-t310 to 4.4.2 from the tab itsself, but it wasn't possible, because i had rooted it before. So i tried to remove my root and then something happened and my tab got stuck in firmware upgrade encountered an issue. please select recovery mode in kies & try again charging battery screen.. i looked for solutions with both kies and odin, but they get stuck at 7% while flashing????? Nothing seems to work, i tried it even through the philz recovery mode after wiping cache and deleting cache partition, but it only gets stuck at the boot loop and then when i try to flash it with odin it gets stuck on system.img at about 7%... I really don't know what to do :crying: Please help me, I am desperate !
Click to expand...
Click to collapse
Since you mentioned that you still have your Philz custom recovery, have you tried flashing a rom. It may or may not work, but it is worth a shot.
My samsung grand dous got suddenly off and I had to flash stocks rom with Odin again but the problem is that every time try to flash it strucks on initialsation or setup connection... I tried with multiple ports and Odin versions.. replace battery also but no sucess .. tried pit file then it shows nand write start .. failed
Help please
pratyaksh tyagi said:
My samsung grand dous got suddenly off and I had to flash stocks rom with Odin again but the problem is that every time try to flash it strucks on initialsation or setup connection... I tried with multiple ports and Odin versions.. replace battery also but no sucess .. tried pit file then it shows nand write start .. failed
Help please
Click to expand...
Click to collapse
SOrry wrong forum..
pratyaksh tyagi said:
SOrry wrong forum..
Click to expand...
Click to collapse
Have you asked in your particular phone's model's forum? That should help since we don't even know what phone you have!!
Thanks for moving the thread ..
someone please help with my issue
pratyaksh tyagi said:
My samsung grand dous got suddenly off and I had to flash stocks rom with Odin again but the problem is that every time try to flash it strucks on initialsation or setup connection... I tried with multiple ports and Odin versions.. replace battery also but no sucess .. tried pit file then it shows nand write start .. failed
Help please
Click to expand...
Click to collapse
When I face this problem, i just check the file which im flashing, sometimes it might have not downloaded properly or you might just be flashing firmware of another mobile. Has always worked for me, hope i helped
Hi i need help with my tab s 10.5, the wifi and bluetooth stopped working and i seen on this site that i might need to do a update so i downloaded one and tried to install it, but around 95% complete it failed and then when i turned the tab on it said somthing about firmware update failed and recover wi kies. I then tried another update and all i get when the tab turns on is the sound it makes when coming on and see the samsung logo but thats all i get and the logo wont go away. What have i done wrong and could someone please point me in the right direction. thanks in advance.
that's what is called a bootloop.
You will need the Odin tool to re-flash your stock firmware.
Just search on this forum section for Odin and bootloop and you will get everything you need : )
I try to reinstal stock ROM but in odin mode while installing it, the proccess just stuck in about 99%. I wait until more than 1 hour but still stuck in that proccess. I dont know what should I doing, I am afraid if I unplugged the cable will brick my phone.
Please everybody help me to solve my problem... thanks
Maybe a corrupted download? Which site you used to download stock?