Develop Bugs

[Q] How to change stock firmware (Galaxy Tab 3 Kids)

Hi fellows,
A friend of mine just came back from US with a Galaxy Tab 3 Kids wondering if portuguese language will appear on the device when he lands on Rio. This surely didn´t happened.
He is pissed off with Best Buy guys that told him this bull****.
I´m trying to help him since his little boy doesn´t speak english.
Is it OK to pick the brazilian stock firmware (ZTO) that I´ve found here (http://samsung-updates.com/details/16066/Galaxy_Tab_3_Kids/SM-T2105/ZTO/T2105UBAMK1.html) and using ODIN to flash on a US device?
If someone could tell me the necessary steps, I´ll be very thankfull.
All best,
Sergio
Rio de Janeiro/Brazil

smafra said:
Hi fellows,
A friend of mine just came back from US with a Galaxy Tab 3 Kids wondering if portuguese language will appear on the device when he lands on Rio. This surely didn´t happened.
He is pissed off with Best Buy guys that told him this bull****.
I´m trying to help him since his little boy doesn´t speak english.
Is it OK to pick the brazilian stock firmware (ZTO) that I´ve found here (http://samsung-updates.com/details/16066/Galaxy_Tab_3_Kids/SM-T2105/ZTO/T2105UBAMK1.html) and using ODIN to flash on a US device?
If someone could tell me the necessary steps, I´ll be very thankfull.
All best,
Sergio
Rio de Janeiro/Brazil
Click to expand...
Click to collapse
The way is simple, you must flash the Firmware with Odin
( i have modified the instruction from gr8nole thread Recovery and root ) hit thanks by gr8nole http://forum.xda-developers.com/showthread.php?t=2433853
the way are the same
1. Download ODIN and USB drivers on your computer (just do a google search to find it...version 3.07 will work fine). http://forum.xda-developers.com/showthread.php?t=2189539
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the Firmware file you want to flash, but the file must be an *.tar or *.tar.md5.
8. Hit "START"
9. Wait for device to restart.
I hope these are helpful

bierma32 said:
The way is simple, you must flash the Firmware with Odin
( i have modified the instruction from gr8nole thread Recovery and root ) hit thanks by gr8nole http://forum.xda-developers.com/showthread.php?t=2433853
the way are the same
1. Download ODIN and USB drivers on your computer (just do a google search to find it...version 3.07 will work fine). http://forum.xda-developers.com/showthread.php?t=2189539
2. Power off the device.
3. Restart in "Download Mode" by holding the "HOME" button, "Volume Down" and "Power" all at the same time (for about 5 seconds).
4. Hit the "Volume Up" to enter download mode.
5. Start the ODIN exe program.
6. Connect the device via USB to your computer. Verify the device shows as "Added" in the Message box. If it doesn't show then you need the Samsung USB drivers (just install KIES to get them).
7. Select "PDA" then choose the Firmware file you want to flash, but the file must be an *.tar or *.tar.md5.
8. Hit "START"
9. Wait for device to restart.
I hope these are helpful
Click to expand...
Click to collapse
Thanks so much. It worked perfect!!!

Samsung Galaxy S4 ACTIVE shv-e470s Rooting Guide

Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phone's warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :
Download and install the Samsung USB Drivers on your computer
Disable Samsung KIES program if you have it installed on your computer
Disable any antivirus applications from running on your computer
Enable USB Debugging from Developer Options.
If Developer Options doesn’t appear in Settings, then you need to enable it.
go to Settings, then More, open About Device.
tap seven times on the Build Number.
you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
Check your phone’s battery and make sure that there is at least 50% left before the device switches off
Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
In case you have trouble completing the guide, then you are free to ask for extra help in comments
Download required files (see attachments)
Odin3 1.85
UPDATE-SuperSU-v1.93
unofficial_philz_touch_6.12.8-e470s
Process:
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470s

Did anyone try with E470SKSUAND1 yet?

story said:
Did anyone try with E470SKSUAND1 yet?
Click to expand...
Click to collapse
I tried and it works.

req new download links
The download links has expired . please give me another links.thx

This phone is update to 4.4.2. Are we can't root our phone such as #1?

new files
nickserbanoiu said:
The download links has expired . please give me another links.thx
Click to expand...
Click to collapse
hello my friend....i just renewed the files.

Thanks you !
how about 4.4.2 root, can we use this tool to root?

story said:
I tried and it works.
Click to expand...
Click to collapse
Hi, I also have E470SKSUAND1, but my recovery mode only shows me 4 or 5 options, no install zip option. I looked for the cwm but the shv e470s isn´t supportet yet. How did you do it?

Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.

shv-e470s
Thanh_GSM said:
Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.
Click to expand...
Click to collapse
Bro!! did you repair your shv-e470s boot-loader ?
i have hard bricked my shv-e470s any help?

Does anyone try on E470SKSUCOE1? (lollipop 5.0.1)

Bump for lollipop E470SKSUCOH1 rooting...

Hi, I downgrade my Samsung Galaxy S4 Active (SHV-E470s) from Android 4.4.2 kitkat to Android 4.2.2 JellyBean, Odin says "PASS", it means i successfully flash the 4.2.2 jellybean firmware, then I try to reboot my phone, nothing happens, It won't turn on, I try to charge it but no response, no vibration, it is like completely dead, It is Hard brick? How can I unbrick and revive it? Thank you.

Soft bricked Tab S 10.5

I have recently rooted and installed Blisspop rom to my Tab S. I decided to revert back to the stock rom. I download the rom for the UK and applied via Odin. Download completed and the tab rebooted. The tab is now stuck with the Samsung logo. I can reboot in Odin recovery. I have tried to download openrecovery-twrp tar expecting to see and use TWRP when going into recovery but I don't. Help!

blaired said:
I have recently rooted and installed Blisspop rom to my Tab S. I decided to revert back to the stock rom. I download the rom for the UK and applied via Odin. Download completed and the tab rebooted. The tab is now stuck with the Samsung logo. I can reboot in Odin recovery. I have tried to download openrecovery-twrp tar expecting to see and use TWRP when going into recovery but I don't. Help!
Click to expand...
Click to collapse
1. Turn off your Tab.
2. Press at the same time the buttons Home, Power and Volume +
3. With button Volume - go to wipe data/factory reset
4. Press Power button
5. Wait restart Tab (it may take a few minutes)
I hope this has helped you
Regards

porcelana said:
1. Turn off your Tab.
2. Press at the same time the buttons Home, Power and Volume +
3. With button Volume - go to wipe data/factory reset
4. Press Power button
5. Wait restart Tab (it may take a few minutes)
I hope this has helped you
Regards
Click to expand...
Click to collapse
Thanks but I do not have wipe data/factory reset to choose. All I have is the Odin mode screen. downloading do not turn off target.

In this case, you must first find and then download the correct official stock firmware for your tablet via KIES:
1. Updating to the latest version of KIES program in your PC
2. Run KIES
3. Connect your Tab with Download mode to PC with KIES.
4. KIES Menu Tools -> Firmware Upgrade and Initialisation -> Model name (your Model name Tab. For example SM-T800 or SM-T805) -> OK -> S / N (Serial Number of your Tab from sticker on original box Samsung or sticker on back cover of the Tab) -> OK -> OK -> OK
5. Turn on your Tab in the Download Mode ( press at the same time and hold for approximately 4 seconds the buttons Home, Power and Volume - and then press button Volume +)
6. Next step by step according to the instructions KIES
Please have patience! It can demand good Internet connection and can take some hours.
Regards

sm t113 stuck on odin mode downloading please do nnot turn off target

i was trying to root my sm t 113 by looking here
http://forum.xda-developers.com/galaxy-tab-3/general/sm-t113-inception-auto-root-t3129723
i did those steps but the tablet stucks in downloading screen and kies in pc shows connecting for minutes but cant connect probably
- Charge your tablet preferêcia to 100% (no, not know if your PC is fast or not).
2 - Download the file in the description (page 01.) And extract in some folder.
3 - Go to the Samsung website and download KIES. Install and then plug the tablet to see if it identifies all drivers.
4 - Turn off your tablet and enter the download mode (power + volume down button + menu).
5 - You will have a warning message to you incase one kkkkkk terror. Press Volume up and continue. Open the ODIN program.
6 - In the top tab is written with id, your device has to appear there
i did those. IT installed drivers. now what i see is
odin mode
secure download enable
wow download block 0
product name sm t113
current bin samsung official
system status official
downloading do no turn off target

Any fast emergency help?

Any help?

I wait.

Cursed Chico said:
I wait.
Click to expand...
Click to collapse
Look up your stock rom on sammobile and download your regions rom. Flash the stock rom and try it again. I had this problem as well and i was able to resolve it by flashing stock and retrying.

[SM-P600] Hard bricked - firmware flash failed

I bought this device recently. Unfortunately it seems now that it's hard bricked. I've got the Hyperdrive rom installed and it used to work perfect. The problem started when the battery ran out while I were streaming live TV. Since then it wouldn't boot properly. It was stuck in bootloop, however I were still able to get it into recovery and download mode. I tried to recover from a backup through TWRP but did not succeed properly (the screen just froze after a couple of minutes). Afterwards it was really hard to make it do anything. It started to boot into something called "SDCARD MODE", with options to press the volume up key for normal reboot, and volume down for "download mode". But neither option worked.
I managed to get it into download mode and tried to reflash the original firmware for my device (P600ZHUCNH1) with Odin but it failed. When I rebooted the device the display showed the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I tried to flash the same firmware again with Odin but it failed again.
And since then I haven't managed to turn on the device. Holding Home button + Volume Up + Power or Volume Down + Power doesn't work. Battery is fully charged. Tried to reinstall battery. Tried a USB Jig. But no luck.
Any suggestions on what to do?
Thanks in advance!

@MikkelJakobsen
You have a solution to resolve that problem off yours.
Those 3rd screen image, tell that you need to use the Kies Software to restore your tablet to his own factory firmware.
Just follow this steps:
1. turn off your tablet, and go into "Download Mode"
2. start Kies3 Software in Windows, and go to the menu Tools -> Firmware Upgrade and Initialisation
3. Write the Model number off your tablet -> SM-P600
4. Then write the Serial Number (that on the backcover off the tablet).
5. Confirm all ok.
Then it starts to download the original firware files from the Samsung Servers. And it will flash the firmware.
And that's it. You should have after the tablet running smooth and 100% again!!!!
Best regards!

Flygye said:
@MikkelJakobsen
You have a solution to resolve that problem off yours.
Those 3rd screen image, tell that you need to use the Kies Software to restore your tablet to his own factory firmware.
Just follow this steps:
1. turn off your tablet, and go into "Download Mode"
2. start Kies3 Software in Windows, and go to the menu Tools -> Firmware Upgrade and Initialisation
3. Write the Model number off your tablet -> SM-P600
4. Then write the Serial Number (that on the backcover off the tablet).
5. Confirm all ok.
Then it starts to download the original firware files from the Samsung Servers. And it will flash the firmware.
And that's it. You should have after the tablet running smooth and 100% again!!!!
Best regards!
Click to expand...
Click to collapse
Thanks for your help! However, the problem is that I can't even turn on the tablet anymore. The screen just stays black no matter what I do. So I don't see the "Firmware upgrade encountered an issue" anymore and theremore Kies doesn't recognize any connected device.

Try do take off the back cover from the tablet, disconnect all the flex cables.
Remove the 13 screws from the batery holder, and then disconnect the battery cable's power.
Wait a few seconds, and then place all the parts on the tablet again.
And try to turn on the table again.
See if this helps.