Related
I know this was talked about here.
I have rooted my phone i have CWM recovery (installed status bar mod), and my device status is modified ( i cant run system update)..
Any way i can change it without loosing data ? Because all solutions i found included wiping data ... And i hate restoring data with titanium stuff etc...
Thanks folx !
In another thread i was told to go to chainfires root thread but there is only a way with wiping data...
Any one knows way without wiping any data ?
Try triangle away
Sent via The Ultimate beast Note 2 )
You can NOT use OTA updates after rooting. Period. Even if you get your device status to normal (which requires you to factory reset after rooting and running Triangle Away). OTA updates will only work on unmodified systems.
You can, however, get the update from sammobile and flash with Odin.
To quote a person who is a great deal more knowledgeable about the subject:
http://forum.xda-developers.com/showpost.php?p=33709557&postcount=179
FloatingFatMan said:
You can NOT use OTA updates after rooting. Period. Even if you get your device status to normal (which requires you to factory reset after rooting and running Triangle Away). OTA updates will only work on unmodified systems.
You can, however, get the update from sammobile and flash with Odin.
Click to expand...
Click to collapse
Erm, not true. I am rooted and device is normal. Recently I just did an OTA update. After that still used OTA Rootkeeper to restore root.
I have been trying to find a way to get my status: Modified back to normal without wiping data(rooted, stock rom/recovery) but I have had no luck...would be nice if there is a way to do it!
Seifer1975 said:
Erm, not true. I am rooted and device is normal. Recently I just did an OTA update. After that still used OTA Rootkeeper to restore root.
Click to expand...
Click to collapse
That was sheer blind luck then. OTAs are incremental updates, so you could just have easily have bricked your phone doing that.
---------- Post added at 04:39 AM ---------- Previous post was at 04:39 AM ----------
gandalf21502 said:
I have been trying to find a way to get my status: Modified back to normal without wiping data(rooted, stock rom/recovery) but I have had no luck...would be nice if there is a way to do it!
Click to expand...
Click to collapse
There isn't.
FloatingFatMan said:
That was sheer blind luck then. OTAs are incremental updates, so you could just have easily have bricked your phone doing that.
---------- Post added at 04:39 AM ---------- Previous post was at 04:39 AM ----------
There isn't.
Click to expand...
Click to collapse
Oh, I doubt the risk of that happening is high. While I am rooted, everything else on my phone is still stock.
---------- Post added at 05:41 AM ---------- Previous post was at 05:38 AM ----------
gandalf21502 said:
I have been trying to find a way to get my status: Modified back to normal without wiping data(rooted, stock rom/recovery) but I have had no luck...would be nice if there is a way to do it!
Click to expand...
Click to collapse
Well, I was rooted and my device shows normal. I did not wipe data, factory reset or flash a stock ROM again after rooting. In fact, my phone showed modified immediately after rooted and mysteriously changed to normal the day after without me doing anything at all. The only possibility I can think of is that I used the jig as well as triangle away. If you have a jig, you might want to try and see if it works.
FloatingFatMan said:
You can NOT use OTA updates after rooting. Period. Even if you get your device status to normal (which requires you to factory reset after rooting and running Triangle Away). OTA updates will only work on unmodified systems.
You can, however, get the update from sammobile and flash with Odin.
Click to expand...
Click to collapse
FloatingFatMan said:
That was sheer blind luck then. OTAs are incremental updates, so you could just have easily have bricked your phone doing that.
---------- Post added at 04:39 AM ---------- Previous post was at 04:39 AM ----------
There isn't.
Click to expand...
Click to collapse
You seem wrong about many things here in this thread. You can definitely do OTA updates after root, but you will most likely lose root... I'm aware you have 2000+ posts, but be careful what you say...
Sent from my GT-N7100 using Tapatalk 2
I have jig... what have you done with it ? Just stick it in?
Handwritten from my Note 2
You get "modified" status because of custom recovery. If you want "official" status just flash the stock recovery with ODIN. And yes you will lose root, but you will get OTA updates.
Sent from my GT-N7100 using xda app-developers app
DanDroidian said:
You seem wrong about many things here in this thread. You can definitely do OTA updates after root, but you will most likely lose root... I'm aware you have 2000+ posts, but be careful what you say...
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
I guess you can quote Chainfire as being wrong as well then, because he says pretty much the same thing. OTA's are usually incremental updates, which means they patch existing files rather than replace them. IF you've just rooted and not done ANYthing else, you can probably get away with flashing an OTA. But if you've patched anything, expect trouble.
If you use ODIN to flash the OTA, you're probably safe as it has coding to fix such problems (as far as I can discern anyway), but flashing the OTA without is just asking for it.
OTA Updates are overrated, why wait for an OTA when you can download from sammobile at your leisure.
Sent from my Galaxy Note II using Tapatalk 2
kirilorius said:
You get "modified" status because of custom recovery. If you want "official" status just flash the stock recovery with ODIN. And yes you will lose root, but you will get OTA updates.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Does anyone know if stock Rogers for i317m is available anywhere online yet?
And secondly, does this phone get OTA updates or is it via Kies? My SGS2 were via Kies only and carrier specific.
Sent from my SGH-I317M using xda premium
Coud i flash different Country rom via ODIN? Will i have Some problems with it?
Handwritten from my Note 2
My recovery is stock, and is say's modified. The only thing I did was root the phone, stock rom/recovery.
I have a Jig from my S2 days...how will inserting the jig reset it? Anything else need done other than insert it? Did not know the Jig would work with the N2...did not work with my S3.
With the phone off, insert the jig. It should boot into download mode. Then I reboot. That's all I did. I am not saying it will work, just that this was the only thing I did differently from others. Otherwise cannot explain why my status shows normal even though I am rooted and did not factory reset or wipe data after that.
FloatingFatMan said:
I guess you can quote Chainfire as being wrong as well then, because he says pretty much the same thing. OTA's are usually incremental updates, which means they patch existing files rather than replace them. IF you've just rooted and not done ANYthing else, you can probably get away with flashing an OTA. But if you've patched anything, expect trouble.
If you use ODIN to flash the OTA, you're probably safe as it has coding to fix such problems (as far as I can discern anyway), but flashing the OTA without is just asking for it.
Click to expand...
Click to collapse
Hi,
I have a galaxy S2, and i have ordered note 2.
I was running a stock rom, with root, cwm, lots of mods, and many themes applied, and i was still able to get ota updates. So if you can do that on the s2, i would think you could it on a n2 too.
Corey
Sent from my GT-I9100 using Tapatalk 2
Hope this helps:
As I mentioned in this thread, I now have rooted stock 4.1.2 and "Device status: Normal".
The OTA software update process doesn't hang anymore now
springer.music said:
I've just flashed this firmware with Mobile Odin Pro and selected all the wipes + root/mobile odin injection.
Now my N7105 is rooted with "Device status: Normal".
When I rooted it using this guide (stock recovery method), I had "Device status: Modified", so it was not possible to check for OTA updates.
Click to expand...
Click to collapse
I got a used GNex that is rooted and on stock 4.2.2. It is a takju maguro device. I have CWM installed. I tried updating via OTA but it failed in between. How do I update to the stock 4.3 ROM?
Is there a flashable zip, or is the process more complex?
Sent from my Galaxy Nexus using xda app-developers app
A quick search would have given you what you needed. The N4 needs a new 4.3 boot loader and radio. The same applies for the GN but many users reported a successful update with their old configuration. However it is suggested that you do flash the 4.3 boot loader and the XLJ1 radio. There is both a zip to be flashed under CWM and a fastboot image. I suggest flashing those through fast boot. If you get a brick because go the lazy easy way, don't bother posting again. It shouldn't but the instructions are very clear. With that said, the new boot loader and radio are readily available on these forums.
On a side note, you will NEVER be able to update via the official android OTA, that is for stock devices only. That us why it failed. I'm surprised you even got a notification
Sent from my Galaxy Nexus using Tapatalk 2
TheDareDevil said:
I got a used GNex that is rooted and on stock 4.2.2. It is a takju maguro device. I have CWM installed. I tried updating via OTA but it failed in between. How do I update to the stock 4.3 ROM?
Click to expand...
Click to collapse
you do not have a stock device if the OTA failed (even with root and CWM)
why do people think that they can modify the system and still get OTAs?
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
iLeopard said:
AOn a side note, you will NEVER be able to update via the official android OTA, that is for stock devices only. That us why it failed. I'm surprised you even got a notification
Click to expand...
Click to collapse
if he's on a stock rom, he will get the OTA... however, he modified system files so it will never update. (what he modified is outside of root and CWM)
Thanks for the help guys. If I want to flash an unofficial 4.3 ROM, I just have to flash the zip file right?
My PC is unavailable now so I won't be able to fastboot flash atm.
Sent from my Galaxy Nexus using xda app-developers app
Zepius said:
you do not have a stock device if the OTA failed (even with root and CWM)
why do people think that they can modify the system and still get OTAs?
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
if he's on a stock rom, he will get the OTA... however, he modified system files so it will never update. (what he modified is outside of root and CWM)
Click to expand...
Click to collapse
That's EXACTLY what I said.... :/
---------- Post added at 11:54 AM ---------- Previous post was at 11:52 AM ----------
TheDareDevil said:
Thanks for the help guys. If I want to flash an unofficial 4.3 ROM, I just have to flash the zip file right?
My PC is unavailable now so I won't be able to fastboot flash atm.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Its almost as if you didn't read... (Sigh)
Its people like you who shouldn't mess with their phones if you don't even bother doing your research
Sent from my Galaxy Nexus using Tapatalk 2
iLeopard said:
That's EXACTLY what I said.... :/
Click to expand...
Click to collapse
mostly what you said... he'd still get the OTA however, and you questioned how he got it. i clarified for anyone else that might be reading.
root + cwm does not elimiate the OTA working correctly. i have root and TWRP and i get OTAs fine, and they flash fine because i did not modify any stock system files.
You must be on 100% stock odexed MD4 to flash this (rooted/unrooted doesn't matter)
Just posting this here for people to find it easily
All credits to @poit and @edfunkycold!
poit said:
And thanks to edfunkycold we have the link to the update:
http://android.clients.google.com/p...50053.USER_L710_SPR_MD4_to_MK3_Update_FWD.zip
Click to expand...
Click to collapse
Mirror: http://www.androidfilehost.com/?fid=23212708291680782
---
What does voiding Knox mean? Boot loader flag goes from 0x0 to 0x1
Notes about Knox:
FLASHING A: CUSTOM KERNEL or CUSTOM RECOVERY on MK3 boot loader VOIDS KNOX
CANNOT DOWNGRADE TO OLDER FIRMWARE!
Composed of an OS side and firmware (bootloader-side) implementation. Apps (OS components) can be removed, but the firmware components CANNOT.
You can still root on the new firmware...but you can't flash a custom recovery or custom kernel, or else you will trip Knox
First!!!!
Damn we need a way to get rid of KNOX!!!!!!.... LOL
Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?
anees02 said:
Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?
Click to expand...
Click to collapse
You have to return to stock
Sent from my SPH-L710 using Tapatalk
anees02 said:
Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?
Click to expand...
Click to collapse
You have to be unrooted stock. It needs stock recovery. The zip is just like you taking a OTA update.
Speedin07si said:
You have to be unrooted stock. It needs stock recovery. The zip is just like you taking a OTA update.
Click to expand...
Click to collapse
Go to this thread, worked perfectly for me
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
---------- Post added at 02:10 PM ---------- Previous post was at 02:10 PM ----------
anees02 said:
Thank you CNexus....Could I flash this file with custom recovery TWRP or Rooted 4.1.2 phone...or I have to return stock?
Click to expand...
Click to collapse
Worked great for me, use this method
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
lordnykon21 said:
Go to this thread, worked perfectly for me
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
---------- Post added at 02:10 PM ---------- Previous post was at 02:10 PM ----------
Worked great for me, use this method
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
I'm in the process of doing this right now lol. I was debating on going back to stock or just waiting till one of the many talented devs figured something out.
Speedin07si said:
I'm in the process of doing this right now lol. I was debating on going back to stock or just waiting till one of the many talented devs figured something out.[/QUOTE
According to the great minds here, it has to be like stock, it's essentially like receiving the ota.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
lordnykon21 said:
Go to this thread, worked perfectly for me
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
---------- Post added at 02:10 PM ---------- Previous post was at 02:10 PM ----------
Worked great for me, use this method
http://forum.xda-developers.com/showthread.php?t=1904099
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Then I have to download 834MB file size in order to flash 495MB file size
Is it any way to flash stock recovery and make unrooting by supersu itself?
If you already have a stock rom and recovery installed and you don't have an sd card handy, it's easy to update the zip using ADB sideload. Assuming you have used ADB before and know how to use it on your computer
Download the file and rename it something easy like "update.zip"
reboot the phone into recovery by pressing volume up, home, and power
select the option to update via ADB
plug in phone to computer with USB cable
on your computer open a terminal window and if you want to make sure the ADB connection works type "ADB devices" you should see some numbers listed followed by "sideload"
flash the file by typing "adb sideload update.zip" if you named it update.zip that is, then press enter
once it's done hit the power button to reboot
profit??
Ok I know this is a dumb question does it have to be on sd card or internal card for recovery to pick it up
Sent from my SPH-L710 using xda premium
evo3d6 said:
Ok I know this is a dumb question does it have to be on sd card or internal card for recovery to pick it up
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
if you are trying to flash it from the phone it needs to be on an external SD card.
I'm hearing rooting is not working after the update.
Sent from my Nexus 5 using Tapatalk
So, I know this is supposed to be the official update, and I flashed via adb, but KIES and SprintZone don't seem to understand that. The two screenshots show what I'm talking about. These should both say "current" or "Up to date"
Do u need to be unrooted or can I just reinstall my rooted stock ROM and do the update
rocking the 4.4
ruthlessptizzle said:
Do u need to be unrooted or can I just reinstall my rooted stock ROM and do the update
rocking the 4.4
Click to expand...
Click to collapse
Just updated OP, check it again
I just checked it about two hours ago and the update wasn't there....but u have it from somewhere else
rocking the 4.4
---------- Post added at 10:13 PM ---------- Previous post was at 10:13 PM ----------
Ment I have it from a download I got
rocking the 4.4
counterfeit187 said:
So, I know this is supposed to be the official update, and I flashed via adb, but KIES and SprintZone don't seem to understand that. The two screenshots show what I'm talking about. These should both say "current" or "Up to date"
Click to expand...
Click to collapse
This is what Kies says for my phone. Samsung Kies doesn't know Sprint's update is available. Wait for the OTA.
Razorwindmo46 said:
This is what Kies says for my phone. Samsung Kies doesn't know Sprint's update is available. Wait for the OTA.
Click to expand...
Click to collapse
After the update you have to use Kies3
Sent from my Nexus 7 using Tapatalk
counterfeit187 said:
After the update you have to use Kies3
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I didn't use this download. I'm still on MD4. I'll wait awhile to see if anyone has issues with this dl since I'm not on Sprint. I'm using Ting for a provider.
Stock Firmware/odex/deodex Rooted/No Knox/Init.d/BusyBox
This is PURE stock with Knox removed. Firmware includes all imgs (aboot (bootloader) modem, NON-HLOS, tz, sdi, rpm, sbl1) needed to boot.. THE FIRMWARE DOES NOT INCLUDE SYSTEM!! YOU NEED TO FLASH ODEX/DEODEX ZIP AFTER FLASHING FIRMWARE
Odex/Deodex options for you choice..
DIRECTIONS:
Download firmware and flash it in download mode via ODIN
Download Odex/Deodex
Flash via custom recovery
Update SU Binary
DOWNLOADS:
COD6_Firmware
COD6_Odex
COD6_Deodex
Any developer is free to use this for building or whatever
let me try this
Unlimited tether mod working with Lollipop?
Can I flash the ROM zip on ank4 firmware or do I have to upgrade firmware?
Sent from my SM-N910T using xda premium
C-4Nati said:
Can I flash the ROM zip on ank4 firmware or do I have to upgrade firmware?
Sent from my SM-N910T using xda premium
Click to expand...
Click to collapse
As far as I know, you need to upgrade to COD6, which is 5.0
Deodexed Version did not boot. Just gave it a try with no luck. Froze up at the Tmobile screen.
Sent from my SM-T900 using XDA Free mobile app
"Pure stock untouched" but, no Knox? I'm just wanting to make sure.
The pure stock with KNOX from yesterday is not allowing me SELinux mode changer to keep Permissive. Will Permissive stick on this?
i want to say yes and answer my own ? but i figured id be positive
by asking can i flash the odex/deodex zips over an Odin flashed full OD6 firmware flash
mcdavid said:
"Pure stock untouched" but, no Knox? I'm just wanting to make sure.
The pure stock with KNOX from yesterday is not allowing me SELinux mode changer to keep Permissive. Will Permissive stick on this?
Click to expand...
Click to collapse
Fixed the OP just for you..
lacoursiere18 said:
Fixed the OP just for you..
Click to expand...
Click to collapse
Thanks! (I ran out of thanks button for the day) You the man!
Could I dirty flash this over stock COD6 from yesterday to get rid of KNOX? Or must I do clean install??
I usually do clean install. But, dirty seems like it may be safe in this instance . . . .
mcdavid said:
Thanks! (I ran out of thanks button for the day) You the man!
Could I dirty flash this over stock COD6 from yesterday to get rid of KNOX? Or must I do clean install??
I usually do clean install. But, dirty seems like it may be safe in this instance . . . .
Click to expand...
Click to collapse
Not sure you can try..
i updated to lollipop now i cant root my phone
manny20082020 said:
i updated to lollipop now i cant root my phone
Click to expand...
Click to collapse
How are you trying to root? Root works fine.
mcdavid said:
How are you trying to root? Root works fine.
Click to expand...
Click to collapse
with odin CF-Auto Root
manny20082020 said:
with odin CF-Auto Root
Click to expand...
Click to collapse
No need to root according to op it's pre rooted just update su binary
SIGMAxB said:
No need to root according to op it's pre rooted
Click to expand...
Click to collapse
i was already on stock lollipop but i cant root
I tried installing the odexed version but it doesn't boot up....i wiped and factory reset and still wont install. Anyone else having issues? Am I doing something wrong?
Going to give deodexed version a try will report back shortly
---------- Post added at 03:23 PM ---------- Previous post was at 03:21 PM ----------
manny20082020 said:
i was already on stock lollipop but i cant root
Click to expand...
Click to collapse
Have you actually flashed this rom yet
Deo does not boot.
SIGMAxB said:
Going to give deodexed version a try will report back shortly
---------- Post added at 03:23 PM ---------- Previous post was at 03:21 PM ----------
Have you actually flashed this rom yet
Click to expand...
Click to collapse
i dont have recovery to flash it i flashed the firmware
[Q&A] [ROM|Stockish|NO KNOX] 8/7/15 Sprint TouchWiz Lollipop 5.1.1 (N910PVPU4COG5)
Q&A for [ROM|Stockish|NO KNOX] 8/7/15 Sprint TouchWiz Lollipop 5.1.1 (N910PVPU4COG5)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM|Stockish|NO KNOX] 8/7/15 Sprint TouchWiz Lollipop 5.1.1 (N910PVPU4COG5). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Flashing Kernel on OG5 5.1.1
I recently updated to the Sprint 5.1.1 and tried to root using odin and did not achieve root. However, now the phone gives an error when trying to do OTA update. How do I flash this kernel? Do I use odin to flash it or do I use the regular recovery
VIPDMERC said:
I recently updated to the Sprint 5.1.1 and tried to root using odin and did not achieve root. However, now the phone gives an error when trying to do OTA update. How do I flash this kernel? Do I use odin to flash it or do I use the regular recovery
Click to expand...
Click to collapse
The kernel is flashed in TWRP recovery. Odin that, making sure you've selected the option to disable OEM lock in Odin 3.10.6 and do not select auto reboot. When done with the TWRP Odin flash, pull USB and battery, wait 30 seconds, reboot to recovery and flash kernel.
Are you having trouble with Odin or boot? CF Auto Root is not used to root OG5. After flashing the kernel, flash the rooted ROM or root with SuperSU zip if just wanting to root stock and boot.
Sent from my SM-N910P using Tapatalk
Getting Root
Not to familiar with everything, however I tried flashing CF Autoroot, i downloaded the beastmode kernel already. Just tryung to figure out how to get root with SU and how to flash TWRP. Recetly got this new phone from sprint, got the last one stuck in a bootloop.
Downloading the deodex file now, just need to k ow what to do step by step if possible. I really appreciate your assistance
VIPDMERC said:
Not to familiar with everything, however I tried flashing CF Autoroot, i downloaded the beastmode kernel already. Just tryung to figure out how to get root with SU and how to flash TWRP. Recetly got this new phone from sprint, got the last one stuck in a bootloop.
Downloading the deodex file now, just need to k ow what to do step by step if possible. I really appreciate your assistance
Click to expand...
Click to collapse
Maybe this will help?
http://forum.xda-developers.com/showthread.php?p=62241848
Sent from my SM-N910P using Tapatalk
Im on the deodexed version can i use viper sound mod or 3 minit battery mod?
5.1.1 lollipop stockish rom
Help!! Is it possible to flash this rom to my note 4. Im coming from cm12.1. I really hate this rom and i really want stock back. Does anybody have detailed instructions to flash this to my phone? I am currently running cm 12.1 5.1.1
What baseband are u on
Note 4
Boe1
Will it work to go from boe1 to cog5? From cm12.1?
U have to flash the baseband so u can flash this rom
---------- Post added at 11:40 AM ---------- Previous post was at 11:37 AM ----------
dvtmg704 said:
U have to flash the baseband so u can flash this rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3174350
5.1.1 lollipop stockish rom
Thanks soooooo much! Now i have the baseband version i need. So now can you wqlk me through the steps of wiping and installing? I know how to do everything else but not the wiping. I know that you dont wipe the sd card. Bu i still need help thanks!
U have to use odin to flash it
No wiping or anything? Just flash it. Wont that brick?
Just flash the og5 baseband in odin select AP then select the baseband then flash then u can flash this rom
knoxjosh39 said:
No wiping or anything? Just flash it. Wont that brick?
Click to expand...
Click to collapse
Did u get it working
samep said:
The kernel is flashed in TWRP recovery. Odin that, making sure you've selected the option to disable OEM lock in Odin 3.10.6 and do not select auto reboot. When done with the TWRP Odin flash, pull USB and battery, wait 30 seconds, reboot to recovery and flash kernel.
Are you having trouble with Odin or boot? CF Auto Root is not used to root OG5. After flashing the kernel, flash the rooted ROM or root with SuperSU zip if just wanting to root stock and boot.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Uh oh. Lol. I did not see or tick any oem lock etc. I just pulled battery and flashed the kernel in twrp. All seems well. About to flash the odex rom. If i should worry please let me know? Afak im ok?
Sent from my SM-N910P using XDA Free mobile app
Droid2drummer said:
Uh oh. Lol. I did not see or tick any oem lock etc. I just pulled battery and flashed the kernel in twrp. All seems well. About to flash the odex rom. If i should worry please let me know? Afak im ok?
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
AFAIK you may be OK despite that. I keep seeing that on the web so I thought maybe that's why OE1 thru OG5 bootloaders are giving fits and bricks (semi-bricks).
It may only apply to full tars; did you OTA or KIES to OG5?
The saga continues... feedback like this helps. Thanks!
samep said:
AFAIK you may be OK despite that. I keep seeing that on the web so I thought maybe that's why OE1 thru OG5 bootloaders are giving fits and bricks (semi-bricks).
It may only apply to full tars; did you OTA or KIES to OG5?
The saga continues... feedback like this helps. Thanks!
Click to expand...
Click to collapse
Seem fine. Just flashed this rom. Freeza stock. ..so far great. But for the love of android, still my weather animations in stock weather are frozen. Not moving. Anyone??
Sent from my SM-N910P using XDA Free mobile app
---------- Post added at 06:03 AM ---------- Previous post was at 06:01 AM ----------
Droid2drummer said:
Seem fine. Just flashed this rom. Freeza stock. ..so far great. But for the love of android, still my weather animations in stock weather are frozen. Not moving. Anyone??
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
This is pissing me off now...since ota of 5.1.1 officially ota 'd. Ive had great everything for a change. But weather animations borked. Nobody else mentioned it anywhere. So i dont get it. Ive wiped flashed reset etc.
Sent from my SM-N910P using XDA Free mobile app
Droid2drummer said:
Seem fine. Just flashed this rom. Freeza stock. ..so far great. But for the love of android, still my weather animations in stock weather are frozen. Not moving. Anyone??
Sent from my SM-N910P using XDA Free mobile app
---------- Post added at 06:03 AM ---------- Previous post was at 06:01 AM ----------
This is pissing me off now...since ota of 5.1.1 officially ota 'd. Ive had great everything for a change. But weather animations borked. Nobody else mentioned it anywhere. So i dont get it. Ive wiped flashed reset etc.
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Since you have a OG5 tar, now you can wipe it and clean install Odin to fix that.
Maybe try that oem lock disabled this time? Odin 3.10.6
Sent from my SM-N910P using Tapatalk