Related
Dear Sir,
I have followed all the steps but still not rooted my htc desire 820 dual sim
http://forum.xda-developers.com/desire-820/general/htc-desire-820-root-easily-t2913064..............this link I have followed.....
but didn't sucess.......
plz....help...Sir
HTC Desire 820 can be easily rooted with few simple steps.
I am not responsible for your warranty loss or device not functioning properly.
Steps
1] Unlock Bootloader if you don't know how to do it visit this page
2] Download TWRP Recovery from here
3] Download Super Su from Here and transfer it to your device
4] Reboot to Fastbboot mode using Volume Down and Power Key
5] Connect Phone to PC
6] Extract files from Recovery.zip in one location and simply click on flash-recovery.bat
7] After Step 6 is finished Using volume keys navigate and select recovery option and go to recovery
8] After rebooting in recovery select Install zip > and selecting supersu.zip transferred in first step to obtain root access.
9] Reboot
Very much urgent.......plz. reply...........
subinoy.bose said:
Dear Sir,
I have followed all the steps but still not rooted my htc desire 820 dual sim
http://forum.xda-developers.com/desire-820/general/htc-desire-820-root-easily-t2913064..............this link I have followed.....
but didn't sucess.......
plz....help...Sir
HTC Desire 820 can be easily rooted with few simple steps.
I am not responsible for your warranty loss or device not functioning properly.
Steps
1] Unlock Bootloader if you don't know how to do it visit this page
2] Download TWRP Recovery from here
3] Download Super Su from Here and transfer it to your device
4] Reboot to Fastbboot mode using Volume Down and Power Key
5] Connect Phone to PC
6] Extract files from Recovery.zip in one location and simply click on flash-recovery.bat
7] After Step 6 is finished Using volume keys navigate and select recovery option and go to recovery
8] After rebooting in recovery select Install zip > and selecting supersu.zip transferred in first step to obtain root access.
9] Reboot
Very much urgent.......plz. reply...........
Click to expand...
Click to collapse
Try thishttp://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
Please let us know what is the exact message your getting are you not able to get to Recovery ???
I have been able to successfully root my device by following the steps outlined did not face any challenges hence wanted to check.
Same Probleam here pls help me
I AM SUFFERING FROM SAME PROBLEAM.
i am using desire 820q.
bootloader unlocked.
but when i enter in recovery then that says entering recovery then come back.
pls help me...
problem with htc 820q root
mukulatri said:
Try thishttp://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
Click to expand...
Click to collapse
I'm following this instruction and could not root my device,
My HTC 820q is unlock but when I want read SuperU.zip from Sd card at fastboot>recovery my mobile goes to restart and procedures been uncompleted.
Please help me, is this instruction only for HTC 820?
How we can root HTC 820q?
tah3r said:
I'm following this instruction and could not root my device,
My HTC 820q is unlock but when I want read SuperU.zip from Sd card at fastboot>recovery my mobile goes to restart and procedures been uncompleted.
Please help me, is this instruction only for HTC 820?
How we can root HTC 820q?
Click to expand...
Click to collapse
http://forum.xda-developers.com/desire-820/general/htc-desire-820-root-easily-t2913064
mukulatri said:
Try thishttp://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
Click to expand...
Click to collapse
Well I have the same issue, recovery looks installed after pressing power button to launch it goes to a screen and go back almost instantly on fastboot screen. I also tried last version of framaroot, does not help either... just get a failed message
尚雷諾 said:
Well I have the same issue, recovery looks installed after pressing power button to launch it goes to a screen and go back almost instantly on fastboot screen. I also tried last version of framaroot, does not help either... just get a failed message
Click to expand...
Click to collapse
Hi there, let's go step by step without "shortcuts" that are typically working on PC/WIn.
1. Unlock bootloader of your phone at HTCdev[dot]com [replace 'dot' with . - sorry for confusion I haven't earned reputation to post external links yet]. All necessary tools (fastboot) will be provided to download during process as well as necessary instructions. You need Windows/Linux or OS X computer to complete this step.
2. Download custom recovery .img file and save it to same directory you have fastboot files (e.g. from step 1) on you computer
3. Start phone in fastboot mode (mind fast boot option in Power settings must be unchecked if you using VolDown [-] start option (not necessary if you use adb reboot bootloader). Battery must be charged over 10% (I suggest 30% to stay secure); connect to computer (phone shall display Fastboot USB)
4. Navigate command/terminal window on your computer to location of recovery image file from step 2 (fastboot files must be there or have a correct path specified).
5. On computer terminal window run command: fastboot flash recovery filename_of_recovery.img . Red section must be exact custom recovery file name.
6. You'll get some communication in terminal. If completed OK will be among them, if failure, there will be FAIL with description of reason (e.g. low_power). If only "waitng for device" dislays, check connection with phone.
7. Navigate phone to HBOOT, then select recovery. If recovery don't start, check step 1 and restart from step 3. If only icon with red ! appears, it means you have stock recovery installed. Please verify from step 1.
8. Once custom recovery is installed and working, use it to flash SuperSU or any other superuser app (must be flashable .zip to be applied). Install just 1 root application, to avoid problems. At this point, you may consider flashing busybox also if you plan extensive file modification, but it's not necessary for root. For any sake, clear cache befor restart.
9. Restart the phone - you shall view SuperSU application or any other superuses app you've flashed i step 8.
Hope now works.
T0ark said:
Hi there, let's go step by step without "shortcuts" that are typically working on PC/WIn.
1. Unlock bootloader of your phone at HTCdev[dot]com [replace 'dot' with . - sorry for confusion I haven't earned reputation to post external links yet]. All necessary tools (fastboot) will be provided to download during process as well as necessary instructions. You need Windows/Linux or OS X computer to complete this step.
2. Download custom recovery .img file and save it to same directory you have fastboot files (e.g. from step 1) on you computer
3. Start phone in fastboot mode (mind fast boot option in Power settings must be unchecked if you using VolDown [-] start option (not necessary if you use adb reboot bootloader). Battery must be charged over 10% (I suggest 30% to stay secure); connect to computer (phone shall display Fastboot USB)
4. Navigate command/terminal window on your computer to location of recovery image file from step 2 (fastboot files must be there or have a correct path specified).
5. On computer terminal window run command: fastboot flash recovery filename_of_recovery.img . Red section must be exact custom recovery file name.
6. You'll get some communication in terminal. If completed OK will be among them, if failure, there will be FAIL with description of reason (e.g. low_power). If only "waitng for device" dislays, check connection with phone.
7. Navigate phone to HBOOT, then select recovery. If recovery don't start, check step 1 and restart from step 3. If only icon with red ! appears, it means you have stock recovery installed. Please verify from step 1.
8. Once custom recovery is installed and working, use it to flash SuperSU or any other superuser app (must be flashable .zip to be applied). Install just 1 root application, to avoid problems. At this point, you may consider flashing busybox also if you plan extensive file modification, but it's not necessary for root. For any sake, clear cache befor restart.
9. Restart the phone - you shall view SuperSU application or any other superuses app you've flashed i step 8.
Hope now works.
Click to expand...
Click to collapse
Thanks for your answer, I have to say I properly unlocked the phone so I do not think there is a way I messed up with this step as when I start bootloader it clearly shows on the top of the screen ''UNLOCKED".
When I flashed recovery on my phone I had no errors prompted or any message of failure. The process went well until a success notification.
Now when I start my phone into bootloader I repeat, I clearly see that recovery has been installed but when I attempt to start it then I'll be almost instantly brought back to the bootloader screen... now I started to wonder if... if an update of android could cause this kind of issue? The point is my phone is using android 4.4.4 and not the factory version 4.4.2. I remember having updated my android version which was perhaps a mistake as this phone is not very old and I was planning to root it in the next days... Now I'm not expert just try to figure it out.
I tried different system to auto root via different apps, some using the PC some using directly the phone, I never get any success...
尚雷諾 said:
Thanks for your answer, I have to say I properly unlocked the phone so I do not think there is a way I messed up with this step as when I start bootloader it clearly shows on the top of the screen ''UNLOCKED".
When I flashed recovery on my phone I had no errors prompted or any message of failure. The process went well until a success notification.
Now when I start my phone into bootloader I repeat, I clearly see that recovery has been installed but when I attempt to start it then I'll be almost instantly brought back to the bootloader screen... now I started to wonder if... if an update of android could cause this kind of issue? The point is my phone is using android 4.4.4 and not the factory version 4.4.2. I remember having updated my android version which was perhaps a mistake as this phone is not very old and I was planning to root it in the next days... Now I'm not expert just try to figure it out.
I tried different system to auto root via different apps, some using the PC some using directly the phone, I never get any success...
Click to expand...
Click to collapse
Ok, please try twrp from Original Android Development tread (it works for me, mind, I'd question it's stability) or Philz recovery (sorry, I found only Chinese, but it's for verivication only: h...ps://drive.google.com/file/d/0BygOvRquk4z8S05kRC1XMXdSbXM/view?usp=sharing - please adjust tt in address - rookie rules).
I'd suggest test running from Fastboot: fastboot boot custom_recovery.img - replace with actual file name from directory you're running terminal.
This shall verify if it's problem with recovery file or any remaining protection...
T0ark said:
Ok, please try twrp from Original Android Development tread (it works for me, mind, I'd question it's stability) or Philz recovery (sorry, I found only Chinese, but it's for verivication only: h...ps://drive.google.com/file/d/0BygOvRquk4z8S05kRC1XMXdSbXM/view?usp=sharing - please adjust tt in address - rookie rules).
I'd suggest test running from Fastboot: fastboot boot custom_recovery.img - replace with actual file name from directory you're running terminal.
This shall verify if it's problem with recovery file or any remaining protection...
Click to expand...
Click to collapse
Does having S-ON bother? I was also wondering about that but all tutorials I found no one mentions anything about the S-ON or S-OFF thing.
But I do have a S-ON under UNLOCKED
what is stock recovery.img name
i dont know what is the real stock recovery.img name.
htc desire 820q dualsim
I can't root my htc desire 820q by this method, is any alternative way?
I just root my phone with same procedure but my phone still show s-on..... How can i s-off my phone.....
Hey guys,
I'm in the process of flashing CM's Marshmallow onto my LG G3s (D722) however after successfully rooting using KingRoot I can't seem to be able to apply the necessary bootloader patch as the /dev/block folders and contents are completely missing. Anyone have any suggestions? I installed a kdz lollipop stock room to begin the process if it helps.
heyy
you can you help me?
I have the CM13 but the root was not well and using the kingroot but is dont working .
as you did with the kingroot ?
sorry for the inconvenient
Hey,
I flashed a stock ROM (make sure you download the right one for your model/IMEI) via LG Flash Tool and then used Kingroot, be sure you haven't downloaded KingoRoot by mistake, it's not the same app as it just installs a heap of apps on your phone and does nothing but tell you it's failed after.
I'm still stuck with the bootloader patch though :s
There is a thread with all the info about this phone, tells you the right way to patch boot
Hi,
I figured out what the problem was, the thread you mention doesn't cater for my specific issue. Which I had hoped for a response about, however incase others have this same issue I'll list the process I went through here to resolve my issue and correctly root, patch and flash the D722;
1: Install Kingroot on your phone with your data connection active and let it try to root your phone, if it fails proceed to the next steps. Otherwise skip to step 3
THINGS TO DOWNLOAD: (If initial root attempt fails)
Download & install LG Flash tool on your PC.
Download & install Unified Android Toolkit (Optional, but useful for mass installation of aps)
Search for the correct KDZ file for your phone model/IMEI HERE
Install Busybox on your phone
Install Flashify on your phone
2: With your phone in download mode Flash your downloaded ROM using the LG Flash tool in CSE mode and click start, ignore language settings and any error messages. It should proceed as normal.
3: Follow the instructions for patching the bootloader HERE. If it fails proceed to step 4.
NOTE: The root location of your external SD card may be in a different directory, for example like mine it was in /storage/external_SD/ so try to change the file location in the command before proceeding.
4: Download and install CWM ROM Manager on your device (use Unified Android Toolkit to do this if you don't have/want gapps). Then choose fix permissions and repeat step 3.
5: Flash twrp via Flashify.
6: Download your desired ROM and place it in the root of your SD card, reboot to recovery.
7: Install the ROM as usual via TWRP, remember to wipe dalvic etc.
If mods would like me to post this as a guide instead I'll gladly do so!
NarcissusFarie said:
Hi,
I figured out what the problem was, the thread you mention doesn't cater for my specific issue. Which I had hoped for a response about, however incase others have this same issue I'll list the process I went through here to resolve my issue and correctly root, patch and flash the D722;
1: Install Kingroot on your phone with your data connection active and let it try to root your phone, if it fails proceed to the next steps. Otherwise skip to step 3
THINGS TO DOWNLOAD: (If initial root attempt fails)
Download & install LG Flash tool on your PC.
Download & install Unified Android Toolkit (Optional, but useful for mass installation of aps)
Search for the correct KDZ file for your phone model/IMEI HERE
Install Busybox on your phone
Install Flashify on your phone
2: With your phone in download mode Flash your downloaded ROM using the LG Flash tool in CSE mode and click start, ignore language settings and any error messages. It should proceed as normal.
3: Follow the instructions for patching the bootloader HERE. If it fails proceed to step 4.
NOTE: The root location of your external SD card may be in a different directory, for example like mine it was in /storage/external_SD/ so try to change the file location in the command before proceeding.
4: Download and install CWM ROM Manager on your device (use Unified Android Toolkit to do this if you don't have/want gapps). Then choose fix permissions and repeat step 3.
5: Flash twrp via Flashify.
6: Download your desired ROM and place it in the root of your SD card, reboot to recovery.
7: Install the ROM as usual via TWRP, remember to wipe dalvic etc.
If mods would like me to post this as a guide instead I'll gladly do so!
Click to expand...
Click to collapse
help me please. i cant patch bootloader says sdcard/aboot.bin: no such file or directory, i have the file on internal and external memory... please help.....
feikacab said:
help me please. i cant patch bootloader says sdcard/aboot.bin: no such file or directory, i have the file on internal and external memory... please help.....
Click to expand...
Click to collapse
Some versions have another path.
Sent from my D722P using XDA-Developers mobile app
ErnuB said:
Some versions have another path.
Sent from my D722P using XDA-Developers mobile app
Click to expand...
Click to collapse
yes. works fine. thanks dude.
Could you tell me the path I should use? or the full code I should write?
NarcissusFarie said:
Hi,
I figured out what the problem was, the thread you mention doesn't cater for my specific issue. Which I had hoped for a response about, however incase others have this same issue I'll list the process I went through here to resolve my issue and correctly root, patch and flash the D722;
1: Install Kingroot on your phone with your data connection active and let it try to root your phone, if it fails proceed to the next steps. Otherwise skip to step 3
THINGS TO DOWNLOAD: (If initial root attempt fails)
Download & install LG Flash tool on your PC.
Download & install Unified Android Toolkit (Optional, but useful for mass installation of aps)
Search for the correct KDZ file for your phone model/IMEI HERE
Install Busybox on your phone
Install Flashify on your phone
2: With your phone in download mode Flash your downloaded ROM using the LG Flash tool in CSE mode and click start, ignore language settings and any error messages. It should proceed as normal.
3: Follow the instructions for patching the bootloader HERE. If it fails proceed to step 4.
NOTE: The root location of your external SD card may be in a different directory, for example like mine it was in /storage/external_SD/ so try to change the file location in the command before proceeding.
4: Download and install CWM ROM Manager on your device (use Unified Android Toolkit to do this if you don't have/want gapps). Then choose fix permissions and repeat step 3.
5: Flash twrp via Flashify.
6: Download your desired ROM and place it in the root of your SD card, reboot to recovery.
7: Install the ROM as usual via TWRP, remember to wipe dalvic etc.
If mods would like me to post this as a guide instead I'll gladly do so!
Click to expand...
Click to collapse
Is this guide still works or will you update instructions? also where can I download TWRP and LineageOS for LG G3s D722?
Just going to dump all the info I've found about this device into this thread. All the threads pertaining to this thread are in Russian and I can't read Russian, so this might be helpful to any English speaking owners of this tablet.
Special thanks to Telegram user @SSDD_1744 (don't know your XDA/Reddit user, I'm sorry) for basically spoonfeeding me all these instructions!
WARNING: If you need to flash to stock for whatever reason, be sure to download a image file specific to your country. If you don't, you'll hard brick your device that can only be fixed QPST (supposedly).
Rooting:
(Tested on 5.0.2)
Install KingRoot. Let it root your device.
Install Super-SU Me, to get rid of the bloatware that comes with KingRoot.
Installing Xposed:
I used Flashify to flash TWRP. Be sure to flash the right version though (2.8.7.7 v2) or else you won't be able to mount cache.
Then download Xposed (version sdk21 ARM) and flash it.
WARNING: Flash v1 of the modded TWRP and you won't be able install any apps after flashing Xposed.
Unbricking:
Still working on it. Downloaded QPST but have not been able to get QPST 2.7 to read the tablet.
Links:
Discussion:
https://translate.googleusercontent...690491&usg=ALkJrhiWSlkbZ-tUofZx68NPSGIv8pjIPA
Root:
https://translate.googleusercontent...JrhhQszcRvUo8HILThvz57JmsLj4L9g#entry44556703
https://translate.googleusercontent...JrhiCt__6apcRhk-gtcBExYJCnC9nGQ#entry41676452
Instructions for obtaining the rights to Ruth phones / tablets.
Tested on Android 4.4+
perhaps this algorithm works on Android 5+, I have no way to verify
All transactions with their phones / tablets are performing at your own risk !!!
To get started, read this post from start to finish and only then proceed to action!
Introduction
This instruction is written based on my own experience obtaining root on their plates, and then on the Xperia M2, bought plemyashki. For instructions attached versions of applications that were relevant at the time, the new version can download the relevant topics on the forum, there will find all information on how to work with the proposed programs and algorithms for their actions (links to topics added).
For all the action with your phone / tablet you are responsible for yourself!
Download all the necessary tools to obtain Root (of instructions / topics on the forum), obespechte for phone / tablet access to the Internet (Wi-F / mobile data) and let the phone settings / tablet installation from unknown sources.
Needed Downloads
KingRoot_V4.5.0B202.apk (6.76 MB)
Me_5.9.apk-SuperSU (9.07 MB)
V2.49 Beta.apk SuperSU (5.63 MB)
eu.chainfire.supersu.pro.205.apk (52,88 KB)
Next in series:
1. Install KingRoot .
Get Ruth's right, in the device may reboot.
2. Set SuperSU-Me, .
Run the grantor, the program deletes KingRoot and Chinese KingUser with replacement SuperSu.
Remove the longer SuperSu-Me the desired program.
3. Obnovyaem SuperSu to the latest version. Then set PRO-key .
Installing Pro-key Optionally !!! Use Cases SuperSu without installing key .
4. Open SuperSu and on-demand update binary SU normal way. After a successful update, confirm the request to restart.
5. To make sure that everything is done correctly, check the correct installation and operation of Ruth (mount the system partition on the record), I used the Root Checker Pro and Root Explorer , respectively.
The output is a complete rut without kitayschiny with SuperSu Pro. We use and enjoy
Click to expand...
Click to collapse
Unlocking bootloader (haven't tried this):
https://translate.googleusercontent...Jrhh6g4wI-8Hb_LzAcPnIUxYvWNzZ0A#entry46711087
Stock firmware:
https://translate.googleusercontent...?s=&showtopic=703414&view=findpost&p=45272695
Damn, development has really boomed on this little tablet! Finally got it back after a few months (I sent it into Asus to repair it for me).
Stock ROM:
https://www.asus.com/ru/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (I can't get the English version to load, delete the /ru/ and you'll be redirected to the English site)
https://www.asus.com.cn/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (Chinese site)
==== REMEMBER TO DOWNLOAD THE CORRECT COUNTRY OR YOU'LL BE BRICKED) ====
https://yadi.sk/d/b1NMLXHBsNV8C (latest software for the worldwide model)
[http://4pda.ru/forum/index.php?showtopic=703414&st=320#entry50270292]
http://4pda.ru/forum/index.php?showtopic=703414&st=200#entry49389176 (Asus Flash Tool and stock ROM v4.8.2 WW [WorldWide])
Unlocking bootloader:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48200665 (use fastboot oem device-info to check if it's unlocked)
Root:
http://4pda.ru/forum/index.php?showtopic=690491&st=580#entry44778545 (KingRoot - you'll need a 4PDA.ru account to download this)
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (last section of the post)
CM13:
http://get.cm/?device=P024&type=nightly
https://vasy.ru/CM13/
http://forum.xda-developers.com/android/help/asus-zenpad-8-z380kl-custom-rom-t3370277
http://forum.xda-developers.com/android/development/kernel-asus-z380kl-p024-kcal2-t3405595 (Kernel)
Recovery:
https://vasy.ru/TWRP/P024/
http://4pda.ru/forum/index.php?showtopic=690491&st=1220#entry48094504 (TWRP 2.8.7.0)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051
Guides:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (this has a lot of instructions: root, recovery, boot partition restore, adb drivers etc.)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051 (this has a bunch of files, Resurrection Remix [I haven't tested it yet tho], and instructions on getting out a bootloop)
http://4pda.ru/forum/index.php?showtopic=690491&st=1640#entry49724823 (flashing stock software)
If you want to open the engineering menu, type " * # * # 4636 # * # * "
To boot into fastboot, restart/turn on the device and hold volume up. It'll pop you into a menu with three options.
To boot into recovery, from the fastboot screen (three options), use the volume buttons and navigate to the second option "factory reset" and hit power to confirm. It'll boot into recovery.
=====================================================================================
Recommended way to flash ROMs:
1) Download TWRP. Use adb to boot (NOT flash) into TWRP. Flash ROM there.
2) use KingRoot to root. Use Flashify to flash the ROM.
======================================================================================
If you want to go look up some more info or guides, go here:
http://4pda.ru/forum/index.php?act=...=rel&subforums=0&query=z380kl&forums=570&st=0
and use GTranslate to translate the page. The first page is the earliest posts with the keyword, the last page are the latest post.
please add these ROM's for this Device:
Ressurection Remix:
https://www.androidfilehost.com/?w=files&flid=121811
AICP 12.1:
https://www.androidfilehost.com/?w=files&flid=136181
The latest Official ROM P024 model:
http://dlcdnet.asus.com/pub/ASUS/Ee...ser.zip?_ga=1.109506565.1670552787.1483182775
ZenPad 8 Z380KL Firmware: V5.9.0.0 (WW SKU version only)
Improved Item:
1. Update Google security patch
2. Support unlock tool
9008 brick info:
https://4pda.ru/forum/index.php?showtopic=643084
Pertaining to p024:
https://4pda.ru/forum/index.php?showtopic=643084&st=5740
https://4pda.ru/forum/index.php?showtopic=643084&st=3660 (page 179 - 180, 183 - 185 discusses the files needed to unbrick and how you would - CTRL + F Russ and read the people who quote him)
How I bricked: https://4pda.ru/forum/index.php?showtopic=703414&st=180#entry49329798
https://4pda.ru/forum/index.php?showtopic=690491&st=1420#entry48527044 (unbricking files - dead link though)
https://4pda.ru/forum/index.php?showtopic=703414&st=140 (discussing how to fix using the images from the dump)
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
ROMs
LineageOS: https://download.lineageos.org/P024
AICP: https://saki-sss.blogspot.com.by/2016/12/z380k-aicp-121.html
Resurrection Remix: https://androidfilehost.com/?w=files&flid=121811
(made by https://androidfilehost.com/?w=profile&uid=457095661767100043, found from http://andmem.blogspot.jp/2016/05/asus-zenpad-8-z380kl-root-rom.html#chapter-19) - abandoned?
seities said:
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Click to expand...
Click to collapse
probably not. I think it's only compatible with the SD 410.
xDark_ said:
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
Click to expand...
Click to collapse
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
jutphaas said:
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
Click to expand...
Click to collapse
I don't think unlocking the BL is necessary for flashing LOS. But yes, that's how I get into TWRP as well.
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
Can you still access fastboot, then at least you can flash twrp as described before in this thread and install from twrp lineageos p024 (lineage-14.1-20180105-nightly-P024-signed.zip) and Open gapps to get google playstore etc , select Arm, (not 64) then version 7.1, then Pico would work.
If you have twrp, you at least can still use your asus... I have found no way to flash original stock... stock must not be flashed from twrp.
Since you mention twrp already used, you can try: turn your device off, then press volume up then the bootloader menu comes, select 2: reset to enter twrp(where it says reset. if you had flashed twrp, that is how you can get into twrp) from there, install lineage os and gapps from micro sd card
My rom is MMB29M.WW_P024-V5.9.4-20170613
xDark_ said:
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
Click to expand...
Click to collapse
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
jutphaas said:
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
Click to expand...
Click to collapse
Yes it was. I flashed 15.2 on both stock and LOS. I've heard of some issues with 15.x so you can try .2 or 14.x.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
What error was given? What do you see when you connect it to a computer? What does "tablet locked" mean? Would help if you gave some pictures too.
I'm currently in the process of getting the RAW files/service ROMs for AFT but I don't have an ETA on when I'll be able to get that.
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
pucci2 said:
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
Click to expand...
Click to collapse
Does it respons to adb devices of fastboot devices in this stage?
no, it is not recognized
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
Hi All,
First of all, I am not responsible for the final outcome of your device. This is a choice you have made. This is what I did to get the phone I have want for years now. Follow these steps to “unlock bootloader, install root, and make certain partitions R/W”. By doing so you can install a custom bootanimation and custom fonts with apps from the Google Play Store. Make a full backup of device storage because you will be wiping your phone. Backup phone by connecting to PC and copy all necessary folders from phone storage to a temp folder on PC desktop (documents, downloads, pictures, dcim, music, videos etc). My device apps were auto backuped by Google Account. I copied and pasted the device storage to my laptop. This is all down on a windows 10 laptop. Using the ADB and Fastbbot tools from the android platform tools. Caution, if you are not use to rooting devices, don't do this!
Requirements: Use good quality USB cable when connecting to PC Phone must be fully unlocked (check settings/about phone and scroll all the way to bottom for unlock status) Download and install the latest Android Platform Tools to preferable to C:\adb (https://rb.gy/8yeouu) . Disable driver signing on your PC (https://rb.gy/8iva24) Download and install OnePlus USB drivers (https://rb.gy/awepqe). Download and install Qualcomm USB drivers (https://www.gadgetsdr.com/qualcomm-usb-driver/). Must be on Android 11 (not Android 12 there is a special step included to downgrade)
1) phone must be fully unlocked from T-Mobile.
2) Device needs to be on Android 11! Mandatory
If on Android 12, downgrade to 11 with this link and update once!!!!!
https://forum.xda-developers.com/t/op9pro-repository-of-msm-unbrick-tools-tmo-eu-glo-in.4272549/
3) do not restore or setup phone at this time but connect to WIFI, go into settings/about phone and tap several time to enable developer settings. then in system/developer settings enable OEM Unlock and enable USB Debugging and disable Auto Update!
4) Unlock the bootloader with this link.....https://rb.gy/8f0psw (the phone will factory reset and then boot to system
5) Use this link to gain root... https://rb.gy/dtsb2n
6) download flashable Magisk from here and copy to internal storage on device....https://www.rootingsteps.com/magisk-zip/
7) install TWRP from this link https://twrp.me/oneplus/oneplus9pro.html and while in TWRP flash the Magisk zip file.
Boot to system and open the Magisk Manager and click the upper install to direct path.
8) download this script and move it to phone internal storage.....https://rb.gy/pcdquz then boot to TWRP recovery and flash the zip. the phone will boot to system....enjoy
9) install from Goole Play Store Bootanimation changer by jimmy rum and Fontfix.
Now you can install a custom bootanimation and custom font.
Questions, just ask......
TheGhost
MOD ACTION:
Thread closed as duplicate of https://forum.xda-developers.com/t/...eplus-9-pro-includes-t-mobil-variant.4467317/