Develop Bugs

Idiot's guide to flashing the Xoom (for fun and profit)

This guide is for you that have a new Xoom (WiFi only, US model) with Android 3.1 and want to
- get root access
- enable the external SD card unit
Please note that Android 3.2, which now is available for the US Wifi models, make this guide more or less obsolete. If your aim is to have root access, then there are probably simpler methods.
What you need to do can be encompassed in these following short steps (will be detailed later on) in the following order. Each step is required before you can proceed to the next one. However, make sure that you are very very careful and dont try to take any shortcuts. That may soft-brick your device, and you may have a difficult time to explain that to your wife ... You have been warned!
I strongly recommend you to read the entire guide before trying this. In fact, read it twice to ensure that you have understood everything. If there is wierd stuff that you dont understand, dont hesitate to ask. The reason for me writing this down is that I like to document what I have learned. This is to me an excellent way to ensure that I will remember what I just did. Another reason was that I could not find a single thread that encompassed all steps required. There are many different threads, but noone (that I could find) that really guides you from start to goal. So enjoy and good luck!
I would like to thank LandMaster and cam30era for helping out with advice during my initial trail-and-error session. I soft-bricked my device once and had big problems to get by point 4.3 (avoid overwriting of CWM), but with their encouragement I finally succeeded.
If someone else adapts this guide for the EU model or the 3G model, feel free to drop me an IM and I will update the guide for these devices too. Until then, this has only been tested on a WiFi only, 32 GB device bought in the US. If you brick your 3G or EU bought model, dont call me ...
0. Overview of the 6 required steps
1. Install Motorola USB drivers for your computers (for USB connectivity)
2. Install Java SDK and Android SDK tools (for adb and fastboot commands)
3. Unlock the device for flashing (allowing replacement of recovery and boot images)
4. Install a modified recovery image (ClockWorkMod recovery for Android)
5. Root the device (Allow r/w access to the device filesystem)
6. Flash a kernel that supports the SD card (SD card access, overclocking etc.)​
Steps 1, 2, 4, 5 and 6 require that you download install, image and zip files needed for the flashing.
All this was performed on a Windows XP x86 SP3. Windows 7, Mac and Linux users will probably have to do some steps differently.
Update July 7: I have tested the procedure on Windows 7 x86 now and the procedure is identical to Windows XP.
1. Install the latest Motorola USB drivers
The installation file can be found here
http://www.motorola.com/Support/US-...tware_and_Drivers/USB-and-PC-Charging-Drivers
1.1 Install the drivers and ensure that your Xoom is recognized by the computer
2. Installation of development software
Java SDK 6 and Android SDK (for Honeycomb at least) need to be installed. You can find the installation kits here.
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u26-download-400750.html
http://developer.android.com/sdk/index.html
2.1 Install them as any other software.
2.2 What I had to do was to manually modify the PATH environment variable. I use Windows XP so I did that by right clicking on My Computer, choose Properties and select Advanced. Here I added the path to platform-tools and Tools
%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\QuickTime\QTSystem\;D:\Java\Android-sdk\platform-tools;D:\Java\Android-sdk\tools
Note: If the Android SDK complains that the Java Dev Kit cant be found, just press Back and then Next again. Wierd, but that seems to do the trick ... go figure.
2.3 Test that ADB and FASTBOOT works. You should open a command window and go to your Android installation directory. Plug in your Xoom to your computer and write 'adb devices'. Your Xoom should now be listed like this
C:\Documents and Settings\Anders>adb devices
List of devices attached
0288414343813157 device​
Did your device not show up? Make sure that you have USB debugging enabled in Settings / Applications / Development
3. Unlocking the device for flashing
This step will effectively erase the internal storage, including all your apps and settings. Use whatever backup you want to rescure important data before you start.
3.1 Power up and start the Xoom
3.2 Ensure that your device is fully recognized by the computer. A good sign is that the 'Portable device' dialog is activated on Windows when your Xoom has booted. The Xoom should also be seen in 'My Computer'. If not, go back to step 2 and double check your USB drivers.
3.3 Use the command 'adb reboot bootloader' to go into Flash mode
3.4 Use the command 'fastboot oem unlock'. This will trigger a dialog on your Xoom. Follow the instructions on the screen to complete the unlocking. I repeat, this *will* do a factory reset and all data will be lost!
3.5 Once unlocked, the Xoom will restart and work as normal, but now ready for step 4
4. Install recovery image (CWM)
Download the recovery image file and save it to your computer
4.1 Boot into flash mode with 'adb reboot bootloader'
4.2 Install your downloaded recovery image
C:\Documents and Settings\Anders> fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img​
4.3 Restart the device with 'fastboot reboot'. Timing is essential here, so be alert when the device restarts, or you will have to redo section 4.
4.4 Enter CWM with the following procedure
4.5 Once the Motorola logotype is shown, start counting to 3. At 3, press the Volume Down button. This should result in the text 'Android Recovery' in the top left corner. If it does not work, experiment with the timing ...
4.6 When 'Android Recovery' is shown press the Volume Up button. This should invoke the CWM recovery menu. If that works, then congratulations for reaching this far .
Here is a potential pitfall. If you are unable to enter CWM *before* the device boots into Honeycomb, then the newly installed recovery image will be overwritten by the system default recovery. There are ways to prevent this (see posts below), but I recommend you to redo step 4 instead of messing with removal of system files. But both methods would probably work. Experiment!
5. Rooting the Xoom
The root zip file is located here
5.1 You need to transfer the ROOT zip file to a working micro SD card. You can do this on a computer or cell phone, but the ROOT zip must be located in the root directory of the SD card.
5.2 Insert the now prepared SD card in the Xoom
5.3 Boot into recovery (as described in 4.3). Navigate using the volume buttons and press the power button to select the active option
5.4 Select 'Install ZIP from sd card'
5.5 Select 'Choose ZIP'
5.6 Navigate to the ROOT zip file with the Volume buttons and select it with the Power button. Confirm that you want to install it.
5.7 Everything should indicate success, so back out to the main CWM menu and reboot the device.
5.8 From Android Market, install the ROM Manager app and start it. If the rooting was successful, then ROM Manager should start without any complaints.
6. Flashing a new kernel that supports SD cards (and maybe more ...)
The kernel that I used is described here http://forum.xda-developers.com/showthread.php?t=978013
The kernel zip file is located here
6.1 This step is identical to 5, but swap the ROOT zip towards the KERNEL zip. For simplicity, you may want to prepare the SD card with both zip files at the same time in step 5.1 ...

Looks great. You just might want to give credit to LandMaster and cam30era, too.

Also is this for just USA or all, cos many people brick there xoom if its just for USA only

okantomi said:
Looks great. You just might want to give credit to LandMaster and cam30era, too.
Click to expand...
Click to collapse
Of course, done

juDGEY2k10 said:
Also is this for just USA or all, cos many people brick there xoom if its just for USA only
Click to expand...
Click to collapse
This is only tested on a US device. OP updated.

Will this wipe all USER data?
Also, is the location of the zipped root file fine? the title says "[BOOT] Wifi-Only Charge Light Off".

I only see one problem, you have recovery before boot.img. If you flash the recovery, without a rooted boot.img and happen to boot into honeycomb, it will erase your recovery and load stock. So you can remove /system/etc/install-recovery.sh and /system/recovery-from-boot.p or flash the boot.img BEFORE rebooting out of recovery.

BrokenPixel said:
Will this wipe all USER data?
Also, is the location of the zipped root file fine? the title says "[BOOT] Wifi-Only Charge Light Off".
Click to expand...
Click to collapse
When you unlock your Xoom, it will wipe all user data.

bwcorvus said:
I only see one problem, you have recovery before boot.img. If you flash the recovery, without a rooted boot.img and happen to boot into honeycomb, it will erase your recovery and load stock. So you can remove /system/etc/install-recovery.sh and /system/recovery-from-boot.p or flash the boot.img BEFORE rebooting out of recovery.
Click to expand...
Click to collapse
You're right. I rooted 1st and flashed CWR later. I then used brd's method to update to 3.1, re-root and flash the new bootloader and kernel. So there is a step missing after Step 3. I'm sorry, I don't remember exactly how to do this from HC 3.1. (meaning what files to use) as I was on HC 3.0 at the time.

BrokenPixel said:
Will this wipe all USER data?
Also, is the location of the zipped root file fine? the title says "[BOOT] Wifi-Only Charge Light Off".
Click to expand...
Click to collapse
Yes it will. Read 3.4 again, it will do factory reset.
The root file may vary from case to case, but the procedure is the same AFAIK. I used the one that "charge light off"... There are probably others too.

bwcorvus said:
I only see one problem, you have recovery before boot.img. If you flash the recovery, without a rooted boot.img and happen to boot into honeycomb, it will erase your recovery and load stock. So you can remove /system/etc/install-recovery.sh and /system/recovery-from-boot.p or flash the boot.img BEFORE rebooting out of recovery.
Click to expand...
Click to collapse
This is true, and I will update the OP to reflect that.

So has anyone followed this guide successfully yet? I don't really want to be the first...

yordikins said:
So has anyone followed this guide successfully yet? I don't really want to be the first...
Click to expand...
Click to collapse
Hi
I did!. And you know that someone gotta be first (actually second). Why not take the credit?

pingvinen said:
This is true, and I will update the OP to reflect that.
Click to expand...
Click to collapse
So I'm guessing the OP has been updated? I think I'm ready to dive in
Sent from my Xoom using XDA Premium App

Abracastabya said:
So I'm guessing the OP has been updated? I think I'm ready to dive in
Sent from my Xoom using XDA Premium App
Click to expand...
Click to collapse
Instructions are good to go. Just make sure that you don't reboot after flashing recovery, and before flashing boot image. If you do, by mistake, no harm done. You will just have to flash recovery again.

cam30era said:
Instructions are good to go. Just make sure that you don't reboot after flashing recovery, and before flashing boot image. If you do, by mistake, no harm done. You will just have to flash recovery again.
Click to expand...
Click to collapse
Sounds good and thanks B-)
Sent from my Xoom using XDA Premium App

Tnx . Very help full .

I don't know but ROM Manager just isn't budging showing any signs of root... or Superuser (+Elite)... or MarketEnabler...
I don't know, I'm kinda lost here. Let me retry (for the tenth time).

rmcsc said:
I don't know but ROM Manager just isn't budging showing any signs of root... or Superuser (+Elite)... or MarketEnabler...
I don't know, I'm kinda lost here. Let me retry (for the tenth time).
Click to expand...
Click to collapse
Try again, and remember that timing (3 seconds) are key to success ...

I'll retry being more precise. I do get into Recovery and I flash the file mentioned. It seems it flashes correctly but when I boot into the OS, there's no signs of root anywhere.
I'll update in a few. Thanks!
Sent from my T-Mobile G2 using Tapatalk

[Guide] How To Install / Flash Custom Roms Step by Step | Noobs Easy Way | Xperia S

Complete Beginners Guide To Flash Custom ROM on Xperia S | 2011 Devices
This Guide Is Made Easier To Understand The Basics To Install / Flash Custom ROM (Specifically On Xperia Phones). You will not need to go to any annoying links and go on reading lengthy descriptions everything required is provided here. :victory:
Everything is Step By Step.
Just Follow Them And Everything Will Work Fine
Now Lets Get Down To Business.
​
This Tutorial is Specially For
For Complete Beginners
For Newcomers to Android
For Those Who Want To Learn Flashing ROM Easy Way
People who did not had any encounters with Programming
Click to expand...
Click to collapse
Thanks To All The Senior Developers For Providing Us The Knowledge In Developing Modding And Flashing And Amazing Guides Through Out XDA Forum. Without You People This Guide Would Not Have Been Complete
Click to expand...
Click to collapse
This Guide Is Covered in Next 4 Posts With Every Step As Described Below.
NOTE : I Will Explain This Thread For Flashing Custom ROM Cyanogenmod 10 for Xperia S.
Link here---> https://sites.google.com/site/projectfreexperia/
You can download any Stable ROM The Procedure is Same For All.​
Step by Step Process Tree
Step 1. Rooting Xperia S​Step 2. Unlocking Bootloader​Step 3. Installing CWM Recovery​Step 4. Flashing A Custom ROM​Step 5. That's it! You will Have The Custom Rom Running.​
Click to expand...
Click to collapse

Step 1 : Rooting Your Xperia S
Step 1 : Rooting Your Xperia S
This is done by Using A Root Tool Provided by Our Senior Developer @Bin4ry. Please Press His Thanks Button For Helping Out For The Amazing TooL!
Just Download The Tool By Clicking Here : Root_with_Restore_by_Bin4ry_v30
For Xperia S 2.55 Firmware look in this thread: http://forum.xda-developers.com/show...php?p=39498268
But Don't Start Running The Tool Yet. Before That you need to Do A Couple Of Things, :angel:
Before Rooting What You Need?
1.) Install Your Phones Software Driver, ---> PC Companion Will Do The Job Just Connect The Phone And Check If It Detects!
2.) Activate USB Debugging, Setting ---> Developer Options
3.) Activate Unknown Sources, Setting ---> Security
4.) Connect Your Phone via USB
5.) Confirm That Your Device Is Connected Properly In Device Manager.
Only Then,
6.) Proceed With Rooting Tool Kit.
Click to expand...
Click to collapse
How To Use It?
1.) Download Attached File.
2.) Extract it Using Winrar
3.) Double click the RunMe.bat and follow instructions!
Xperia phones with "older" firmware = Normal mode
Sony Tablet and similar = Special mode
Xperia phones with JB Firmare = Mode 3 (Goroh_kun mode)
Click to expand...
Click to collapse
Complete Video Tutorial: https://www.youtube.com/watch?v=7EpkrCq1gfM
Just Follow The On Screen Instructions. (Its really easy like installing a game :laugh
After The Software Finishes Its Work! Your Phone Must BE Rooted By Now!

Step 2 : Unlocking Bootloader on Xperia S
Step 2 : Unlocking Bootloader on Xperia S
Procedure To Unlock Bootloader of Sony Xperia S LT26i :
1.) Installation of Fastboot USB Drivers (Xperia S)​2.) Unlocking Bootloader of Xperia S​
Click to expand...
Click to collapse
Now, We Will Unlock The Bootloader,
Why to Unlock Bootloader?
1.) You can flash custom ROMs/Kernels
2.) You don't need to worry if the new firmware can be rooted or not as with unlocked bootloader u can always ROOT Your device
[ Before We Begin Unlocking Bootloader ]
Get the IMEI code for ur device: type *#06# in phone dialer to find it out, note only the digits (no dashes)
Make Sure The Fastboot Drivers Are Installed.
Make sure u have a windows PC with USB cable to connect the phone
Power down ur phone and keeping the Volume Up button pressed connect the USB cable to PC this will trigger FASTBOOT mode and windows
Will start driver installation, extract the above package and point the driver install to that location (usb_driver) folder
Once drivers are installed just disconnect cable and power on device.
[ How to Unlock ] (Official Way)
Video Link ---> http://www.youtube.com/watch?v=LRH3pC7MhEA
For better understanding, I highly recommend you to watch the above video along with the instructions below:
1.) Download ‘Fastboot Drivers And Pacakges File For Xperia S’ file from → Here
2.) Extract the file you downloaded above on your PC. You’ll get the following three files:
drivers.zip
fastboot_with_Android_USB_file.zip
3.) Go to: http://unlockbootloader.sonymobile.com/ and read everything!
This will open a web page in your default browser. Scroll to the bottom of the Instructions on the page and you’ll see a link like “Continue”, click on it.
In the pop-up window click “Yes, I’m sure” and then in the next window click on both the checkboxes, and then click “I accept”.
4.) Now insert the details as per the instructions:
First 14 digits of your IMEI No. Do NOT enter the last digit (15th) in the box. To know your IMEI No. dial *#06# on your Xperia Arc.
Your Name
Your Email Address
Click Submit.
5.) You’ll get a KEY to unlock boot loader. Write it down somewhere you can remember, it will be used later.
6.) Switch off your phone.
7.) Now extract the “fastboot_with_Android_USB_file.zip” file you got in Step 2.2.
8.) Pick up your phone (it must be switched off) and hold the “Menu” button (the key at the bottom right of your phone), now while holding the “Menu” button connect your phone to your PC with an USB cable.
9.) Once connected — the LED light near the phone’s USB plug will turn blue. If it doesn’t — repeat the Step 8.
10.) Now to install the drivers do the following:
Extract the “drivers.zip” file you got in Step 2.1
Open “Device Manager” on your PC and look for “S1Boot Fastboot” under the head “Other devices”
Right-click on “S1Boot Fastboot” and select “Update Driver Software…”
Now select “Browse my computer for driver software” and select the folder where you’ve extracted all the three files you got in Step 2. Once done — click Ok.
Now click Next (Make sure you’ve ticked the “Include subfolders” checkbox).
If you see any Windows security warning box, don’t worry . Just select “Install this driver software anyway”
Wait for “Windows has successfully updated your driver software” message to appear on your screen. Now click Close.
11.) Open the “fastboot” folder from the file we extracted in Step 7.
12.) Now hold Shift and press mouse right click (Shift + Mouse Right Click) anywhere on the empty white space inside the “fastboot” folder. And then select “Open command window here” from the context menu.
13.) Now in the command prompt window type/paste the following:
fastboot.exe -i 0x0fce getvar version​
14.) It should return a value like “0.3”. This ensures that your device is correctly connected.
15.) Now type/paste the following line in the command prompt window:
fastboot.exe -i 0x0fce oem unlock 0xKEY​
IMPORTANT! Replace the word “KEY” from the above line with the KEY that you received in Step 5. Then Hit Enter.
Click to expand...
Click to collapse
16.) Now wait for the process to complete. Command prompt will show a “Finished” message when it will be completed.
17.)Once it’s done, disconnect the USB cable from your phone and switch it ON.
18.)Your phone’s boot loader should now be Unlocked.
(The above videos and some steps are for Xperia 2011 devices, but most the steps are same for Xperia S/P/U/Sola)
Click to expand...
Click to collapse

Step 3 : Installing ClockWorkMod Recovery With RoceoverX
Step 3 : Installing ClockWorkMod Recovery With RoceoverX
We Will Install Recovery Using RecoverX Software.
Download The Software from Here ----> RecoverX v1.6.8.0
You just have to select your device and the recovery, click "Install" and RecoverX does the rest !!! It's that simple!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Step 4 : Flashing ROM
Step 4 : Flashing ROM
Assuming you have already downloaded your required file, let’s proceed.
ROM Flashing
1.) Copy Paste update on Phone
Copy update- copy update-xxx-xxx-xxx.zip coresponding to your device to sdcard
Copy GAPPS. Download Link [Here]
2.) Flash CM kernel
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC.
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led).
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led).
Click 6 and 7 - Select the boot.img (Extract The boot.img file from zip)
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode.​
Click to expand...
Click to collapse
3.) Boot into Recovery
While FXP logo is displayed (and lights are lit) press several times volume up to enter CWM (recovery)
4.) Flash ROM
To update main rom select
Install zip from sdcard
Choose zip from sdcard
Select your update (copied at step 2)
To flash gapps redo steps a-c and select gapps package
Use gapps version designed for your android version !!! Link ---> Here, Gapps
5.Wipe device
Whip Cache
Whip Dalvik Cache (Advanced Option)
Cache Partition
If after boot you experience ForceClose then is recomended to reboot to recovery and wipe device​
Click to expand...
Click to collapse
6.) Partition format
7.) Reboot and Enjoy :victory:
Troubleshooting
If you experience a bootloop (phone constantly reboots and reboots on the boot screen) or a soft brick (powering on the phone shows an orange triangle with a phone and computer), don’t be afraid. XDA to the rescue!
For a bootloop:
Hold The Power Button And Volume Up Button
If You Hold For 3 Seconds = Soft Reset = 1 Viberation
If You Hold For 10 Seconds = Hard Reset = 3 Viberations***
Power on the Phone Again, Keep pressing Volume Up Button
Your phone will boot into recovery.
Select “Wipe data/ Factory reset”. (Volume Up for going up and Volume down to go down)
After the reset is done, select “Reboot system now”.
The phone will reboot and you should be all fine.
***Do Not Try Hard Reset Untill And Unless The Phone is Facing Major Problems,
For a soft brick:
You probably flashed some faulty firmware or firmware not meant for your device.
The File You Downloaded Must Be Incomplete.
Download the correct firmware and flash again.

Feedback And Corrections
Please Feel Free To Message Me About Any Dead Links Or Corrections​
Feedbacks Are Welcome!​​

Which is the best way to flash / install a custom ROM / gapps ? With Flashtool or through TWRP / CWM ?
I'm now on stock ROM, Xperia ZL. Do i have to wipe / factory reset / cache / Dalvik cache if i use TWRP ?
Every advice is welcome, thank you

xperia s 2013 jelly bean
I have a question for xperia s jellybean 4.1.2 , i already root it using some other easy method and i wanna know how to flash rom on to that , i have no idea how to flash a rom and i m scared if i try this something might happen so i m asking for help?:laugh:

I know its ment to be straight forward but I have become stuck...
In step 4 - "Click 6/7" when using the Xperia Flasher where do I find the boot.img i need to put on my phone?
Thanks
---------- Post added at 01:37 AM ---------- Previous post was at 12:45 AM ----------
chuckie987 said:
I know its ment to be straight forward but I have become stuck...
In step 4 - "Click 6/7" when using the Xperia Flasher where do I find the boot.img i need to put on my phone?
Thanks
Click to expand...
Click to collapse
It would appear the ROM i downloaded didnt have a kernel.img but now i have a differant ROM and it has a boot.img so all good again!

Can i follow this method on xperia sl and also can i flash xperia s roms to xperia sl.....my boatloader is unlocked but phone isnt rooted so i guess i will skip unlock boatloader method.....which kernel should i flash for slimbean 4.3...it will be great help if someone answer these questions

Please Help
Hi, I searched a lot for the way to flash a custom rom on my Xperia S. But now halfway through, I've got a problem. My device says it does not allow to unlock bootloader, so does that mean that there is no way I can flash a custom rom on my phone? :crying:

mjk123 said:
Hi, I searched a lot for the way to flash a custom rom on my Xperia S. But now halfway through, I've got a problem. My device says it does not allow to unlock bootloader, so does that mean that there is no way I can flash a custom rom on my phone? :crying:
Click to expand...
Click to collapse
You can use only Stock based ROM for locked bootloaders, not the unlocked bootloaders one.

This is very nice thread. For begginers like me in the rooting this.... loved it. i wast to ask a question
can we flash any zip file using flashtool or there are onle few specific files?

mr.sky10295 said:
This is very nice thread. For begginers like me in the rooting this.... loved it. i wast to ask a question
can we flash any zip file using flashtool or there are onle few specific files?
Click to expand...
Click to collapse
You cannot flash .zip files using flashtool. You can flash only Firmwares or kernel files using flashtool.

Mirhawk said:
You cannot flash .zip files using flashtool. You can flash only Firmwares or kernel files using flashtool.
Click to expand...
Click to collapse
ohh...then is there any other method to flash zips otherthan going into recovery?
i am asking because my recovery is not working. when i go into recovery, blank black screen comes up. and it gets stuck there. i waited for very long time to make sure that it is stuck

mr.sky10295 said:
ohh...then is there any other method to flash zips otherthan going into recovery?
i am asking because my recovery is not working. when i go into recovery, blank black screen comes up. and it gets stuck there. i waited for very long time to make sure that it is stuck
Click to expand...
Click to collapse
Which recovery are You using? The 2.8.1.0? It doesn't work with Xperia S. Use the 2.8.0.1 version.

Mirhawk said:
Which recovery are You using? The 2.8.1.0? It doesn't work with Xperia S. Use the 2.8.0.1 version.
Click to expand...
Click to collapse
Wait i will let you know the complete story.
so what happened is
first i was on CM11 for few mnths then switched to MIUIv5 for 1 month. everything was working fine
but when day before yesterday i flashed PA rom i am not able to access the recovery now (previously there was TWRP in my XS). now i can't flash any zip file
when i reboot to recovery it gets stuck on black blank screen. Even the recovery apps like twrp are not working. when i tried to install recovery through app, the app crashes.
As recovery is not working i cant even switch to other roms or any zip file.
i am totally stuck on this ROM
i asked this que on sony mobile group on FB (created by some sony fans), one of the member said "probably this is not ROM fault but the kernel fault. consider trying new kernel"

mr.sky10295 said:
Wait i will let you know the complete story.
so what happened is
first i was on CM11 for few mnths then switched to MIUIv5 for 1 month. everything was working fine
but when day before yesterday i flashed PA rom i am not able to access the recovery now (previously there was TWRP in my XS). now i can't flash any zip file
when i reboot to recovery it gets stuck on black blank screen. Even the recovery apps like twrp are not working. when i tried to install recovery through app, the app crashes.
As recovery is not working i cant even switch to other roms or any zip file.
i am totally stuck on this ROM
i asked this que on sony mobile group on FB (created by some sony fans), one of the member said "probably this is not ROM fault but the kernel fault. consider trying new kernel"
Click to expand...
Click to collapse
If You are on Beta 6 of PA, it doesn't have twrp or cwm. Flash the twrp v2.8.0.1 by terminal emulator method.

Mirhawk said:
If You are on Beta 6 of PA, it doesn't have twrp or cwm. Flash the twrp v2.8.0.1 by terminal emulator method.
Click to expand...
Click to collapse
i am on PA 4.6 BETA4
terminal emulator means the android app or PC's cmd?
PS: sorry giving you too much trouble by asking stupid questions. but i dont have much knowledge about this things deeply. so kindly bear me for some time.

mr.sky10295 said:
i am on PA 4.6 BETA4
terminal emulator means the android app or PC's cmd?
PS: sorry giving you too much trouble by asking stupid questions. but i dont have much knowledge about this things deeply. so kindly bear me for some time.
Click to expand...
Click to collapse
Ah yes, even that one doesn't have recovery.
Unlocked bootloader is must.
You need an Android app. You can find the app here. Also, here is the page of the twrp.
What You need to do is, download the twrp from here. Rename it to fotakernel.img .
Then copy it to Your sdcard.
Then run the following commands on the terminal emulator app:
Code:
su
dd if=/sdcard/fotakernel.img of=/dev/block/mmcblk0p11
TWRP installed!

[Q] Rooting my HTC One X - Issue Encountered

Hey XDA,
This is my first ever post here, so sorry if I mess something up, or this is the wrong section etc. If a mod could direct me to the right one, that'd be great
Anyway, I am trying to root my HTC One C, and I have encountered my first issue.
I have outlined the issue in the video here:
youtube/watch?v=lEXGO2pg_08
In short:
I am following this tutorial: no links..
Step 40 implies your phone would auto-reboot, mine didn't. So I did it manually.
Upon restarting, the tutorial says to connect the phone as a hard-disk. Mine used to do this fine, until I installed the software update this morning and I no longer have that feature, and now I cannot find the HTC file manager.
Any advice?

Can't see the video... From mobile... Here are the steps you need to take :
1. Unlock bootloader from htcdev.com (all steps are given in there)
2. Flash a custom recovery like cwm/twrp
3. Flash the Supersu.zip and reboot!
Done!
-Sent from my IceCold One X!

your video seems to be blocked for me as its private...
anyways 40 steps seems to be very long
simply do these
1.Go to htcdev.com,create account,select unlock bootloader and it will guide you through the unlock.(unlocking will wipe all your data)
2.after unlocking bootloader,simply download these two files
http://download.chainfire.eu/331/SuperSU/UPDATE-SuperSU-v1.32.zip
http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
and flash it in recovery.by using " fastboot flash recovery recovery-clockwork-touch-5.8.4.0-endeavoru.img "
3.after that reboot into bootloader again select recovery and select install from sdcard and from there select the UPDATE-SuperSU-v1.32.zip and install it.
4.after that reboot and done...your rooted

[GUIDE] How To Flash TWRP And Root Xiaomi Mi Max

EDIT 8/2/19: I do not own this device anymore. So i cannot and dont know if anything changed about the procedures unlocking rooting etc. BUT if you are getting any trouble i might can help you. Comment your thoughts below
Hey guy, i saw a lot of guys here wondering how to root and flash twrp recovery on thier devices . Today i am gonna show you how to do that.
First of all make sure 3 things :
1. backup your images, contacts, music tracks etc on a external SD CARD, or on your computer.
2. You MUST have the BOOTLOADER unlocked. To do that, read this guide http://en.miui.com/thread-202290-1-1.html
3.Charge your device to 80%+
HOW TO FLASH TWRP AND ROOT MI MAX
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img"
14. Your phone is now in TWRP recovery mode ( if it is not, the write on ADB: reboot recovery )
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
DOWNLOADS
1. ADB- (https://forum.xda-developers.com/showthread.php?t=2588979)
2. XIAOMI MI MAX HYDROGEN DRIVERS (http://xiaomiadvices.com/download-xiaomi-usb-drivers/)
3. TWRP RECOVERY IMAGE https://dl.twrp.me/hydrogen/ LATEST VERSION IS twrp-3.2.3-0
4. BetaSuperSu 2.74 http://www13.zippyshare.com/v/OFQGvIyA/file.html

RESERVED

The thread must be removed to XIAOMI MI MAX GUIDES, NEWS, & DISCUSSION

Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?

noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
hello, please write again your problem. I can understand what do you mean.

StonebridgeGr said:
hello, please write again your problem. I can understand what do you mean.
Click to expand...
Click to collapse
Ok just two questions then, because I'm not sure what you can't understand. Please explain.
1) What Android, MIUI and kernel did you root?
2) Do you have SuperSu.zip in TWRP 3.0.3 by default? You didn't say anything in your guide about downloading it and from where + what version.

noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
This twrp. Img it's for all the versions but only for mi max. Not the prime . This twrp doesn't contain superSU. If I remember correctly. But if on the TWRP contain the super su. Don't say yes. Just flash it like I saying on the guide. Maybe they upload a newest version. You can use the new. I think I put the official website . I will check it.

Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.

noob456 said:
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
Click to expand...
Click to collapse
LOL I forgot to add the superSU link...

That's what I told you. Then please do.

noob456 said:
That's what I told you. Then please do.
Click to expand...
Click to collapse
ok on the first post you can find all the links. if i miss something please tell me here !

Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?

noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
It's compatible with mi max. You will not have any problem. Don't worry

noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
Waiting to tell me if everything went fine with the installation and the flashing

Hey, tried following Your guide to install a new rom last night. Great guide for noobs like me, but it may be worth renaming the thread to something like "How to flash whatever makes You happy on to Your Mi Max". These instructions seem to work fine regardless of what's being flashed. Great job, mate!

So I finally tried it and it was successful for me as well! But I used the latest version of TWRP (3.1.0) and SuperSu (2.79-20161205). Please add a point in your tutorial to upload SuperSU.zip to the phone first, because out of emotion, I forgot... So I flashed TWRP, booted it and then... ups... no SuperSu So I wanted to reboot the phone to upload SuperSU but since only SuperSU patches dm-verity (the thing I was afraid of the most - I told you before), my phone got into boot-loop and didn't want to start. So I just uploaded SuperSU to a memory card, entered Fastboot Mode again with key-combination, plugged the cable, typed "fastboot reboot-bootloader" command and was again in TWRP to flash SuperSu from my memory card.... ufff.
So I would reedit it a bit:
0. Copy SuperSU.zip to the phone/memory card!
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img" - the phone will get disconnected from your PC automatically
14. Your phone is now in TWRP recovery mode (it takes about 30-60 seconds before FastBoot screen switches into TWRP - wait patiently)
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.

Hey, I just got connected with WiFi and new MIUI 8.2.3.0 MBCMIDL wants to be installed, although the phone is rooted with bootloader unlocked. Is it safe to apply the update? Is it goona remove root so that I have to go over the process again?

So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.

Is there anyway to root the phone without connecting it to pc?

noob456 said:
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Click to expand...
Click to collapse
Thanks for saving me the trouble.
Can someone help with a better method of applying updates?
Will downloading the zip (1.4GB approx) and flashing via TWRP help?

Blackview BV9000 Pro-F ROOT SUCCESS [TWRP + Magisk v16 + Stock Rom]

EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have

Congrats! Would it work on the BV9000 HD version?

Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash

hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F

Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?

>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.

>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><

hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected

Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!

Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers

zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone

I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q

Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?

Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889

TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:

help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?

mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)

Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers

Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...

Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.