Related
SOLVED:::::::::: Thanks to Pirobo_Colmbino
I recently was issued an official unlock code for my t889 from tmo. I tried to unlock the device using an ATT sim and got the "network unlock unsuccessful" message. Apparently, I'm a dunce and didn't read AND follow the instructions properly and entered the wrong code more than once. Now I am told that my device is PERMANENTLY LOCKED and cannot be unlocked. Is this correct? Is there a way to fix it? HELLLP
guardm said:
I recently was issued an official unlock code for my t889 from tmo. I tried to unlock the device using an ATT sim and got the "network unlock unsuccessful" message. Apparently, I'm a dunce and didn't read AND follow the instructions properly and entered the wrong code more than once. Now I am told that my device is PERMANENTLY LOCKED and cannot be unlocked. Is this correct? Is there a way to fix it? HELLLP
Click to expand...
Click to collapse
Hi, im not sure if this is gonna help, but the way I unlock mine was with the help of a simple youtube search. Im new her so i cant post a link.
Steps: dial *#197328640#
step 1: umts
step 2: debug screen
step 3: phone control
step 4 network lock
step 5: perso sha256 off ( wait 30 seconds than hit the menu key and hit back)
step 6: nw lock nv data initialliz (wait about 1 minute and exit.
reboot and that should be it.
Try that out and if it does not work "meaning you dont see all of the options" all you have to do is downgrade to an older version of Stock " yes you will have to root again but it gets the job done.
If it helps dont forget to hit thanks.
Pirobo_Colombino said:
Hi, im not sure if this is gonna help, but the way I unlock mine was with the help of a simple youtube search. Im new her so i cant post a link.
Steps: dial *#197328640#
step 1: umts
step 2: debug screen
step 3: phone control
step 4 network lock
step 5: perso sha256 off ( wait 30 seconds than hit the menu key and hit back)
step 6: nw lock nv data initialliz (wait about 1 minute and exit.
reboot and that should be it.
Try that out and if it does not work "meaning you dont see all of the options" all you have to do is downgrade to an older version of Stock " yes you will have to root again but it gets the job done.
If it helps dont forget to hit thanks.
Click to expand...
Click to collapse
Thanks for your reply. I tried this before and all the worked until it comes to step 5. When I go back, the item "nw lock nv initialliz" (in your step 6), isn't there to select. Perhaps downgrading is the answer?
The part I don't seem to understand is that TMO says because I entered the wrong code multiple times, I lost the ability to unlock. Does this method overwrite or fix the permanent lock they spoke of?
guardm said:
Thanks for your reply. I tried this before and all the worked until it comes to step 5. When I go back, the item "nw lock nv initialliz" (in your step 6), isn't there to select. Perhaps downgrading is the answer?
The part I don't seem to understand is that TMO says because I entered the wrong code multiple times, I lost the ability to unlock. Does this method overwrite or fix the permanent lock they spoke of?
Click to expand...
Click to collapse
Yeah if u dont see it you must downgrade.
and as far as the overwrite im not sure. sorry
Pirobo_Colombino said:
Yeah if u dont see it you must downgrade.
and as far as the overwrite im not sure. sorry
Click to expand...
Click to collapse
Thanks I will try it. Just gotta go find the downgrade rom.
Pirobo_Colombino said:
Yeah if u dont see it you must downgrade.
and as far as the overwrite im not sure. sorry
Click to expand...
Click to collapse
You, sir are correct. I was able to downgrade via Odin, but I lost some functions (which didn't matter since it was only temporary). I performed the steps you provided and tested with an ATT sim. It worked. Then I updated to current stock ROM and rooted. Tested again with ATT sim and my device is still unlocked. Thanks for your help. I hope anyone else who runs into this issue, can find this post and learn like I did.
guardm said:
You, sir are correct. I was able to downgrade via Odin, but I lost some functions (which didn't matter since it was only temporary). I performed the steps you provided and tested with an ATT sim. It worked. Then I updated to current stock ROM and rooted. Tested again with ATT sim and my device is still unlocked. Thanks for your help. I hope anyone else who runs into this issue, can find this post and learn like I did.
Click to expand...
Click to collapse
What Version were you on when you could not unlock it. And what version did you flash?
guardm said:
You, sir are correct. I was able to downgrade via Odin, but I lost some functions (which didn't matter since it was only temporary). I performed the steps you provided and tested with an ATT sim. It worked. Then I updated to current stock ROM and rooted. Tested again with ATT sim and my device is still unlocked. Thanks for your help. I hope anyone else who runs into this issue, can find this post and learn like I did.
Click to expand...
Click to collapse
Im glad i could help. :good:
gedster314 said:
What Version were you on when you could not unlock it. And what version did you flash?
Click to expand...
Click to collapse
I'm not so sure it had much to do with the version, although I am no expert dev. Mind you, this happened in a short period of time.
TIMELINE:
I was on The stock (shipped) rom when I first bought my GN2. I got it new and broke the seal on the box. Upon opening and starting the device, I got an OTA update (don't remember the build but not the LL4 ota). I started doing some reading on XDA, since like most, I like tinkering and tweaking. Not long after that (Mid Jan 2013) I got the OTA from TMO that had "minor fixes and security changes". This is when I read somewhere on XDA that it is not recommended that we accept the OTA update. But it was too late; I had already done it. I came across the unlock instructions posted earlier in this thread but I couldn't get pass all the steps. A few days later I rooted via ROOT66_TMO_UVALL4 rom, which gave me access to SuperUser. [I have this ZIP saved if anyone wants it and wants to show me how share it.] Then I got an official unlock code from TMO.
I followed these instructions that TMO sent me with the unlock code
Thank you for taking the time to contact T-Mobile. Below you will see the Instructions for unlocking your Samsung device.
Please be advised a non T-Mobile SIM card MUST be used to unlock this device.
1. Insert a NON T-Mobile SIM & turn Device on
2. The Device will automatically prompt you to enter code into an empty field.
3. Click/Tap in the empty field above the "Unlock & Dismiss" options (this will display a key pad on the screen).
4. Using the key pad input the Unlock Code provided by T-Mobile.
5. Press the Back button to remove the keyboard from screen.
6. Click/Tap the "Unlock" option; handset should display "Network Unlock Successful".
Please note that if you are unlocking a flip device please use steps 1, 2, 3 and 6.
Click to expand...
Click to collapse
In my haste, I didn't follow the instruction EXACTLY as written. Somehow I managed to enter the unlock code while using my TMO sim and not the "NON TMO sim". When I did this, I got the message in step 6. I thought I was good from here. I tried an ATT sim a few days later to verify but it asked me again for the sim unlock code but the operation was unsuccessful. I tried entering the donor phone's screen unlock code a few times as well as zeros and 1234 and again failed. I tried again with another donor phone with the same result. TMO sent me a second unlock code which also failed. I did tell them that I had done the OTA update and the rep told me it shouldn't matter. I did not tell them I was rooted stock though. The rep told me that due to entering the wrong code multiple times, the device went into "security lockout" and could not be unlocked. I read into several threads and posts and could not find the answer, Thus my original post. I down graded my Rom to T889UVALJ1, successfully performed the unlock procedure posted above (NOT TMO official), and re-installed the ROOT66 rom. Everything is now working perfectly. I put in the ATT sim and it pops right up as ATT.
The real question now is, does the OTA issued by TMO block the unlock exploit and is that what they refer to when they mention "security features"?
Thank for Solving this issue goes to user Pirobo_Colombino see post 2
I encountered the same problem couple weeks ago. The problem is not caused by the TMO firmware update but rather the fact that you tried to unlock the phone using the hack you found on the internet. Per instruction on the free unlock hack online, you selected "PERSO SHA256 OFF", this step is what prevented the phone from being successfully unlocked with TMo unlock code. In order for the TMO unlock code to work, you have to select "PERSO SHA256 ON", then follow the instruction steps to unlock using TMO code. That is what I did and it worked for me. Hope this helps anyone who will run into this problem in the future. Cheers :good:
akdnj88 said:
I encountered the same problem couple weeks ago. The problem is not caused by the TMO firmware update but rather the fact that you tried to unlock the phone using the hack you found on the internet. Per instruction on the free unlock hack online, you selected "PERSO SHA256 OFF", this step is what prevented the phone from being successfully unlocked with TMo unlock code. In order for the TMO unlock code to work, you have to select "PERSO SHA256 ON", then follow the instruction steps to unlock using TMO code. That is what I did and it worked for me. Hope this helps anyone who will run into this problem in the future. Cheers :good:
Click to expand...
Click to collapse
Interesting....... This is the first I've heard of this. Not to say this info is not out there; I just never came across it. I do hope that this reaches the poster of those links (there are quite a few) as a cautionary note. Perhaps someone will post a how-to compiled with all these tidbits included.
After the sim unlock, sim card in HK still also can use it?
Yat_Fung said:
After the sim unlock, sim card in HK still also can use it?
Click to expand...
Click to collapse
I cannot say it will work with HK sim since I have NO experience with that card or even overseas. However, I can say that ATT&T sim works every time I put it in the phone. Have you ever used a HK sim in another phone? If you did and it worked, I don't see why it wouldn't work in this one.
Provide link?
Pirobo_Colombino said:
Hi, im not sure if this is gonna help, but the way I unlock mine was with the help of a simple youtube search. Im new her so i cant post a link.
Steps: dial *#197328640#
step 1: umts
step 2: debug screen
step 3: phone control
step 4 network lock
step 5: perso sha256 off ( wait 30 seconds than hit the menu key and hit back)
step 6: nw lock nv data initialliz (wait about 1 minute and exit.
reboot and that should be it.
Try that out and if it does not work "meaning you dont see all of the options" all you have to do is downgrade to an older version of Stock " yes you will have to root again but it gets the job done.
If it helps dont forget to hit thanks.
Click to expand...
Click to collapse
Could you provide the links to old versions of stock because Ive been having some trouble rooting back to a baseband before vall4
Spartan2x7 said:
Could you provide the links to old versions of stock because Ive been having some trouble rooting back to a baseband before vall4
Click to expand...
Click to collapse
A quick forums search shows this
http://forum.xda-developers.com/showthread.php?t=2102380
You should find what you need here. If it helps hit the thanks button.
akdnj88 said:
I encountered the same problem couple weeks ago. The problem is not caused by the TMO firmware update but rather the fact that you tried to unlock the phone using the hack you found on the internet. Per instruction on the free unlock hack online, you selected "PERSO SHA256 OFF", this step is what prevented the phone from being successfully unlocked with TMo unlock code. In order for the TMO unlock code to work, you have to select "PERSO SHA256 ON", then follow the instruction steps to unlock using TMO code. That is what I did and it worked for me. Hope this helps anyone who will run into this problem in the future. Cheers :good:
Click to expand...
Click to collapse
Thank you so much!! Tmobile sent me the code and I was having problems unlocking my note ll till I read this info.
Samsung Tmobile
handrade773 said:
Thank you so much!! Tmobile sent me the code and I was having problems unlocking my note ll till I read this info.
Click to expand...
Click to collapse
Need help Bad.
Have a tmobile sgh-t889. Tmobile sent me an network unlock pin and entered it. Says network unlock successfull. but still no signal. restarted the device and it again asked for a network pin. did the step again and stil the same..
What could be wrong? BTW its a 4.1.1.
Pls help.
junedar said:
Need help Bad.
Have a tmobile sgh-t889. Tmobile sent me an network unlock pin and entered it. Says network unlock successfull. but still no signal. restarted the device and it again asked for a network pin. did the step again and stil the same..
What could be wrong? BTW its a 4.1.1.
Pls help.
Click to expand...
Click to collapse
Latest OTA is 4.1.2
I'm not sure how you are trying to do your unlock. In order to use the unlock method detailed in post #2, I needed to downgrade my firmware. The method in post 2 WILL NOT work after the OTA update.
If you are using the instructions from your carrier, follow the instructions they emailed you EXACTLY. If you have issues with the carrier instructions, contact them; It's up to them to give you proper tech support on THEIR product.
As I understand, the "hack" method is for mostly intended those who have modded/altered/rooted/other-than-stock devices. Whichever method you use, be aware, YOU RUN THE RISK OF BRICKING YOUR DEVICE. That being said, research your steps BEFORE you end up with a dead device.
I AM NOT a developer nor claim to be an expert at any of these methods. However I have been modding my devices for years by reading and researching XDA. I have had success and failures and so will you. The best advice I can offer is to continue reading the posts CAREFULLY and be patient.
I hope this helps
guardm said:
Latest OTA is 4.1.2
I'm not sure how you are trying to do your unlock. In order to use the unlock method detailed in post #2, I needed to downgrade my firmware. The method in post 2 WILL NOT work after the OTA update.
If you are using the instructions from your carrier, follow the instructions they emailed you EXACTLY. If you have issues with the carrier instructions, contact them; It's up to them to give you proper tech support on THEIR product.
As I understand, the "hack" method is for mostly intended those who have modded/altered/rooted/other-than-stock devices. Whichever method you use, be aware, YOU RUN THE RISK OF BRICKING YOUR DEVICE. That being said, research your steps BEFORE you end up with a dead device.
I AM NOT a developer nor claim to be an expert at any of these methods. However I have been modding my devices for years by reading and researching XDA. I have had success and failures and so will you. The best advice I can offer is to continue reading the posts CAREFULLY and be patient.
I hope this helps
Click to expand...
Click to collapse
Yep I did in detail what has been said in post #2. ( By default my device is 4.1.1. )
When it didnt worked, I asked tmobile for the network pin. I also followed their instruction thoroughly, after i entered the pin they gave, it gave the message network unlock successfull. I noticed that there still was no signal so i restarted my device. However it still keep asking me for a network pin. When I asked them about this, they just said that they dont really know why.
I also did a factory reset.
Wonder what could be the issue. Any thoughts?
junedar said:
Yep I did in detail what has been said in post #2. ( By default my device is 4.1.1. )
When it didnt worked, I asked tmobile for the network pin. I also followed their instruction thoroughly, after i entered the pin they gave, it gave the message network unlock successfull. I noticed that there still was no signal so i restarted my device. However it still keep asking me for a network pin. When I asked them about this, they just said that they dont really know why.
I also did a factory reset.
Wonder what could be the issue. Any thoughts?
Click to expand...
Click to collapse
I would call Tmobile again and talk to someone else. Maybe ask for tier 2 support. Many times, the first person you get is a low level customer support person that only knows what the computer screen shows them unfortunately.
I was given the unlock code and it still says request to unlock network unsuccessful, it's eligible to be unlocked...
All help would be greatly appreciated.
Should I try flashing over back to this stock rom and then see: http://server10.stockroms.net/download/GalaxyNote2/SGH-I317/I317UCALJ2_I317ATTALJ2_ATT.zip
I hate being stuck in a rut like this, already had my account transfered to a T-Mobile microsim. This is driving me nuts...
The person I bought this phone from said they updated but then when I checked it was still at 4.1.2 and said something about update interrupted...
Or which of these should I use: http://www.scottsroms.com/downloads.php?do=cat&id=71
Flashing a Rom won't unlocknyour phone..... Also what do you mean your still on 4.1.2?? That is the latest Rom for the phone. ... Where are you obtaining your unlock code from? The only time att provides it themselves is over the phone. You sure your not getting the wrong code?
Sent from my Xperia X10 using xda app-developers app
Yes I got the code from AT&T over the phone, called them twice and got the same code 1-800-331-0500 they gave me 41907314... According to this: http://galaxynote2root.com/galaxy-note-2-tutorials/how-to-unlock-sim-for-free-on-gsm-galaxy-note-2/ if ya take the newest update, ya can't sim unlock the phone cause it takes out the “NW Lock NV Data Initiallize” (Step #9) according to YouTube user comments...
THIS IS WHY I'm wondering what Stock firmware I need to downgrade back to in order to get that option again and be able to sim unlock my phone.
So I'm wondering if it's I317UCALJ2 or I317UCALK7 that re-enables that option for me. Right now I'm on I317UCAMA4...
_
Sorry bout the 2 posts, I thought it'd auto-append them to my main post...
Okay now I keep getting errors on installing about a signature and then two file locations sdCard0 and I think extsdCard...
How can I fix this do I copy the image to sdCard (InnerSD)? Or do I need CWM to install for Scott's Stock ROMs?
Yup that worked, I had to use Odin and this image http://server10.stockroms.net/download/GalaxyNote2/SGH-I317/I317UCALJ2_I317ATTALJ2_ATT.zip and followed these instructions on installing it: http://androidromupdate.com/2012/11...y-note-2-sgh-i317-original-factory-stock-rom/ then unlocked it with the directions galaxynote2root.com had listed...
n1nj4Lo said:
Yup that worked, I had to use Odin and this image http://server10.stockroms.net/download/GalaxyNote2/SGH-I317/I317UCALJ2_I317ATTALJ2_ATT.zip and followed these instructions on installing it: http://androidromupdate.com/2012/11...y-note-2-sgh-i317-original-factory-stock-rom/ then unlocked it with the directions galaxynote2root.com had listed...
Click to expand...
Click to collapse
hi
I am having the same issue, I got unlock code from ATT but it says network unlock request unsuccessful.
so if I follow above instruction to go back to 4.1.1 I will be able to use the unlock code right?
can you please give me few steps which you used for unlocking... then unlocked it with the directions galaxynote2root.com had listed.<--I dont find it.
I will try to flash it.
and after unlock can we do factory update 4.1.2?
smithjohnatpa said:
hi
I am having the same issue, I got unlock code from ATT but it says network unlock request unsuccessful.
so if I follow above instruction to go back to 4.1.1 I will be able to use the unlock code right?
can you please give me few steps which you used for unlocking... then unlocked it with the directions galaxynote2root.com had listed.<--I dont find it.
I will try to flash it.
and after unlock can we do factory update 4.1.2?
Click to expand...
Click to collapse
You can try the ^^^^^^ links do you can enter your code in too get it unlocked!
Or try this if still not working
http://forum.xda-developers.com/showthread.php?p=34661189
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
Yea after all that it's safe to upgrade back to 4.1.2 or 4.2.2 or nearly any compatible rom you like.
n1nj4Lo said:
Yea after all that it's safe to upgrade back to 4.1.2 or 4.2.2 or nearly any compatible rom you like.
Click to expand...
Click to collapse
Thanks downloading now...
does it matter which SIM I have to put inside? mine is ATT do I have to keep ATT sim inside or Tmobile will work too?
smithjohnatpa said:
Thanks downloading now...
does it matter which SIM I have to put inside? mine is ATT do I have to keep ATT sim inside or Tmobile will work too?
Click to expand...
Click to collapse
Ya might wanna keep the T-Mobile sim in it just to make sure it unlocked it correctly...
n1nj4Lo said:
Ya might wanna keep the T-Mobile sim in it just to make sure it unlocked it correctly...
Click to expand...
Click to collapse
No I mean while doing this process? Odin thing.. does it matter which SIM I have to keep in note
This http://galaxynote2root.com/galaxy-note-2-tutorials/how-to-unlock-sim-for-free-on-gsm-galaxy-note-2/ is the tute I believe, gotta remember it's been 2 months since I did this, so I'm not quite 100% certain. LoL
I'll be having to do it all over again too, by the end of this week possibly, since some jerk decided to steal my note 2 I had to go to ebay and win a new one.
I don't think it'd matter during the Odin flash with a AT&T sim card or T-Mobile one in it, I can't remember if I did it with or without a sim card, but to be on the safe side I'd do it without a T-Mobile sim card in it, just for that first successful boot... Then do the 4.1.1 unlock code method, take the back and battery off then pop in the T-Mobile sim card(Or whatever other non-AT&T carrier sim card) and see if it done it correctly...
n1nj4Lo said:
This http://galaxynote2root.com/galaxy-note-2-tutorials/how-to-unlock-sim-for-free-on-gsm-galaxy-note-2/ is the tute I believe, gotta remember it's been 2 months since I did this, so I'm not quite 100% certain. LoL
I'll be having to do it all over again too, by the end of this week possibly, since some jerk decided to steal my note 2 I had to go to ebay and win a new one.
I don't think it'd matter during the Odin flash with a AT&T sim card or T-Mobile one in it, I can't remember if I did it with or without a sim card, but to be on the safe side I'd do it without a T-Mobile sim card in it, just for that first successful boot... Then do the 4.1.1 unlock code method, take the back and battery off then pop in the T-Mobile sim card(Or whatever other non-AT&T carrier sim card) and see if it done it correctly...
Click to expand...
Click to collapse
Thanks a lot you been real good help for me to unlock my note 2.
yes worked with TMOBILE Sim to so seems like doesnt matter.
and now i updated 4.1.2 with Kies and it worked fine too and my phone is unlock now taking tmobile SIM too.
appreciate it.
so sorry your phone stolen.
help
hi, i'm new here. i don't know anything about phones. i just switched from at&t to tmobile. i'm using the galaxy note 2 (at&t). with a t-mobile sim card. i got the unlock code from at&t and it is not working. it tells me the unlock network is "unsuccessful" and i've already tried it like 6 times. i'm only aloud 10 attempts. can someone please help me? i know this forum is mostly how to unlock the phone manually, like without the unlock code number.. but i have the code, i just want it to work.. i don't want to root or flash or whatever. i don't even know what that means. can someone please help me?
Try this
galxynote2 said:
hi, i'm new here. i don't know anything about phones. i just switched from at&t to tmobile. i'm using the galaxy note 2 (at&t). with a t-mobile sim card. i got the unlock code from at&t and it is not working. it tells me the unlock network is "unsuccessful" and i've already tried it like 6 times. i'm only aloud 10 attempts. can someone please help me? i know this forum is mostly how to unlock the phone manually, like without the unlock code number.. but i have the code, i just want it to work.. i don't want to root or flash or whatever. i don't even know what that means. can someone please help me?
Click to expand...
Click to collapse
I bought an AT&T live demo note 2 that was used in an AT&T store. I used this method from youtube, popped in my niece's T-Mobile microsd and dialed 611. T-Mobile's customer service rang and answered showing it worked. You need 4.1.1 to use this method though. I'm going get me a microsim today since my vibrant doesn't use the micro.
FREE HOW TO UNLOCK SAMSUNG GALAXY NOTE 2
You do not really need the unlock code. Do a search in the forum as you cam just unlock it with Samsung' service menu.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
PUTALE said:
You do not really need the unlock code. Do a search in the forum as you cam just unlock it with Samsung' service menu.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
The link I posted above shows the step by step instructions on YouTube.
this is NOT TRUE if on 4.3.x
PUTALE said:
You do not really need the unlock code. Do a search in the forum as you cam just unlock it with Samsung' service menu.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
The above is not true - if your phone has upgraded firmware, you will NOT see the item "NW LOCK NV RAM...." in your "NETWORK LOCK" "PHONE CONTROL" menu.
So, the ONLY two solutions are:
1) keep bugging ATT to create a case for you and investigate
2) downgrade to 4.1.1 modem (NEED TO READ/UNDERSTAND HOW TO FLASH etc.)
then apply the Samsung service menu "fix" as shown in the above video...*
*Then, you could upgrade to newer ROM... if you wish....:cyclops:
Hi, I have an SGH-I747M that was originally purchased through Bell. In an attempt to unlock to make it work on Koodo, I went through SamMobile (after reading there was no way to unlock post 4.3 OTA update) and that seemed to half work.They resell a service from 123unlock.nl which is a client that uses adb or something of the sort to mess with phone files. The program afterwards said "Your phone is now unlocked! However if you don't see any carriers you need to do something in the advanced option and pay another $2x.xx dollars to do so". I didn't feel like giving them any more money at this point because I was upset that what I originally paid for didn't work properly. The fix was apparently an option in the advanced options that was an NVM repair/rebuild or something of the sort. I should have screenshotted the issue but of course didn't.
Now, the phone will boot up and does not offer me a SIM unlock option anymore. When searching for carriers it will ever only find Rogers for some reason. It won't recognize Koodo or Telus or anything of the sort (or bell when my bell SIM is in). Every now and then when it boots up, it will successfully send a text but only within a 5-10 second time frame after boot (I've made 1 phone call as well for 3 seconds). I've tried the Koodo SIM in my own Nexus 5 and works fine so the network is okay at least (plus I called Koodo and they verified on their end things look good... if that makes a difference). The SGS3 won't even accept an original Bell SIM at this point. It's always on either no network, 1 bar or full bars, never anything in between. I've tried flashing different ROMs from Bell stock to Koodo stock and CM11 and it won't work no matter what I do. Under all ROMs it pops up an "ME Returned temporary error" message on the screen.
I'm hoping someone might have seen this issue before or know what's going on with the phone that I can fix. I'm assuming it's something to do with the modem part of the phone that's refusing to connect to carriers but I'm at a loss to fix it. I haven't tried flashing different modems on it yet because I'm unsure which one would be a good fix and no one has had roughly the same issue I could find in 3 days of Googling for this issue. Any ideas are greatly appreciated. Thanks.
sgtcanadian said:
Hi, I have an SGH-I747M that was originally purchased through Bell. In an attempt to unlock to make it work on Koodo, I went through SamMobile (after reading there was no way to unlock post 4.3 OTA update) and that seemed to half work.They resell a service from 123unlock.nl which is a client that uses adb or something of the sort to mess with phone files. The program afterwards said "Your phone is now unlocked! However if you don't see any carriers you need to do something in the advanced option and pay another $2x.xx dollars to do so". I didn't feel like giving them any more money at this point because I was upset that what I originally paid for didn't work properly. The fix was apparently an option in the advanced options that was an NVM repair/rebuild or something of the sort. I should have screenshotted the issue but of course didn't.
Now, the phone will boot up and does not offer me a SIM unlock option anymore. When searching for carriers it will ever only find Rogers for some reason. It won't recognize Koodo or Telus or anything of the sort (or bell when my bell SIM is in). Every now and then when it boots up, it will successfully send a text but only within a 5-10 second time frame after boot (I've made 1 phone call as well for 3 seconds). I've tried the Koodo SIM in my own Nexus 5 and works fine so the network is okay at least (plus I called Koodo and they verified on their end things look good... if that makes a difference). The SGS3 won't even accept an original Bell SIM at this point. It's always on either no network, 1 bar or full bars, never anything in between. I've tried flashing different ROMs from Bell stock to Koodo stock and CM11 and it won't work no matter what I do. Under all ROMs it pops up an "ME Returned temporary error" message on the screen.
I'm hoping someone might have seen this issue before or know what's going on with the phone that I can fix. I'm assuming it's something to do with the modem part of the phone that's refusing to connect to carriers but I'm at a loss to fix it. I haven't tried flashing different modems on it yet because I'm unsure which one would be a good fix and no one has had roughly the same issue I could find in 3 days of Googling for this issue. Any ideas are greatly appreciated. Thanks.
Click to expand...
Click to collapse
Can you check your phone's settings => About Device and let's know what parameters you have there (Android Version, Baseband Version, Build Number>.
You mentioned you can send text or make call within a limited time frame. Was that with the Koodo SIM or the Bell? If the former, it would suggest the phone is unlocked to some extent but you are probably experiencing a baseband failure or need to correct the APN settings. Did you also try doing a factory reset?
Larry2999 said:
Can you check your phone's settings => About Device and let's know what parameters you have there (Android Version, Baseband Version, Build Number>.
You mentioned you can send text or make call within a limited time frame. Was that with the Koodo SIM or the Bell? If the former, it would suggest the phone is unlocked to some extent but you are probably experiencing a baseband failure or need to correct the APN settings. Did you also try doing a factory reset?
Click to expand...
Click to collapse
The information you're asking for is attached.
The texts I got off were from the Koodo SIM. I have updated the APN as well, and I did do a flash back to stock resetting all settings through Kies emergency update. I found a little trick where if you softbrick it by trying to flash 4.1, it'll give you the "Please use kies" error and that'll take you back to full stock 4.3. I'm pretty sure the baseband failure is the option I need to explore but at this point I don't know where to go to fix this.
Edit: I read this online and tried it: "The 4.3 update introduces a "security feature" which requires carrier- or region-locked phones to be activated once on the original locked network before the unlock code will work." The phone didn't recognize any network with the Bell SIM in except "EXT" which I've never heard of before and it did not connect properly so that didn't work. I also read that inputting #7465625*638*# will give me the Samsung SIM unlock menu which it did however I don't think the issue here is with the root and I'd hate to pay $50 at this point to have that not work as well.
sgtcanadian said:
The information you're asking for is attached.
The texts I got off were from the Koodo SIM. I have updated the APN as well, and I did do a flash back to stock resetting all settings through Kies emergency update. I found a little trick where if you softbrick it by trying to flash 4.1, it'll give you the "Please use kies" error and that'll take you back to full stock 4.3. I'm pretty sure the baseband failure is the option I need to explore but at this point I don't know where to go to fix this.
Edit: I read this online and tried it: "The 4.3 update introduces a "security feature" which requires carrier- or region-locked phones to be activated once on the original locked network before the unlock code will work." The phone didn't recognize any network with the Bell SIM in except "EXT" which I've never heard of before and it did not connect properly so that didn't work. I also read that inputting #7465625*638*# will give me the Samsung SIM unlock menu which it did however I don't think the issue here is with the root and I'd hate to pay $50 at this point to have that not work as well.
Click to expand...
Click to collapse
It's unlikely to be the regional lock as this feature means your phone will work with compatible networks in the region but not in other regions. You may, however, run Chainfire's Region Lock Away to be sure <http://forum.xda-developers.com/showthread.php?t=2470551>
Your firmware settings look OK so I'd be doubtful about a corrupted modem. You may still try to re-flash the modem via custom recovery. Download link for the CWM flashable zip is available here ... http://www.androidfilehost.com/?fid=23252070760973552
The guys who sold you the original code seem to have sold a dud as there is no reason for them to be asking for secondary payments and this sounds like the footprint of a regular scam. I'd be surprised though as they seem to be well rated
Larry2999 said:
It's unlikely to be the regional lock as this feature means your phone will work with compatible networks in the region but not in other regions. You may, however, run Chainfire's Region Lock Away to be sure <http://forum.xda-developers.com/showthread.php?t=2470551>
Your firmware settings look OK so I'd be doubtful about a corrupted modem. You may still try to re-flash the modem via custom recovery. Download link for the CWM flashable zip is available here ... http://www.androidfilehost.com/?fid=23252070760973552
The guys who sold you the original code seem to have sold a dud as there is no reason for them to be asking for secondary payments and this sounds like the footprint of a regular scam. I'd be surprised though as they seem to be well rated
Click to expand...
Click to collapse
I've tried reflashing the modem and I've actually paid $50 for the unlock code from Bell, the original carrier. I used the code to get the network unlock menu and inserted the code. I still get between 1-4 bars now with no network access on either network. It's not showing anything except Rogers still in network operator selection.
Any ideas at this point? It refuses to connect to any networks. I'm out of options.
Edit: I don't know if this makes a difference, but when I do root explorer I can't actually find the nv_data.bin file. It doesn't have anything of the sort in the /efs folder.
sgtcanadian said:
I've tried reflashing the modem and I've actually paid $50 for the unlock code from Bell, the original carrier. I used the code to get the network unlock menu and inserted the code. I still get between 1-4 bars now with no network access on either network. It's not showing anything except Rogers still in network operator selection.
Any ideas at this point? It refuses to connect to any networks. I'm out of options.
Edit: I don't know if this makes a difference, but when I do root explorer I can't actually find the nv_data.bin file. It doesn't have anything of the sort in the /efs folder.
Click to expand...
Click to collapse
Please let me understand a few things ... when you first acquired the phone, was it working normally on Bell prior to the first unlock attempt or you never used it at all until you tried Koodo? Secondly, was the unlock code you got from Bell identical to the one you got from the online service?
I'm trying to establish if it is a case of hardware failure not reported by the previous user especially if you bought it pre-owned from the secondary market. If you are not sure of the previous usage history, it could be a faulty or disconnected antenna which may require professional service. On the other hand if you are sure it was working fine prior to the unlock attempt, try the following ...
1) From the dial pad, enter *#197328640#
2) [1] UMTS
3) [1] DEBUG SCREEN
4) [8] PHONE CONTROL
5) [6] NETWORK LOCK
6) [3] PERSO SHA256 OFF
7) Press Menu => Back button and go all the way back to Step 3) above
8) [6] COMMON
9) [6] NV REBUILD
10) [1] NV REBUILD
Reboot and restart and let's see if this does it.
I've got a similar symtom different scenario (sister in-laws phone). I was also only able to see Rogers network on a search. I've got Telus version. It was working fine until it was brought to the Philippines, got unlocked there and brought back to Canada.
I was only able to see Rogers network until I went into the Service Menu (similar to above) and found the option to change the band. I changed it to Automatic. After that I was able to see Telus network. When trying to connect/register it would take a long time and give me an error "Unable to connect, try again later". I still need to do more troubleshooting, but that might be something to look at.
Note: Phone has stock MOD ROM, rooted and unlocked.
Hello,
I've had a long saga of failures trying to unlock my T-Mobile Samsung Galaxy S III (aka sgh-t999). Firstly I started by trying to convince T-Mobile to give me the code but they gave be the bureaucratic cold shoulder for a year. After threatening to cancel they finally produced an incorrect SIM unlock code for me from Samsung. I tried it and it failed.
I then took my phone to one of those shady SIM unlock places in London and paid them to do it. After a day of waiting they sent me an email of the same, incorrect SIM unlock code which again failed to work.
I decided to try a common method I found all over tutorials that works as follows.
Go to the dialer
*#197328640#
[1] UMTS
[1] DEBUG SCREEN
[8] PHONE CONTROL
[6] NETWORK LOCK
[3] PERSO SHA256 OFF
Wait 30 seconds then press Menu and back
[4] NW Lock NV Data INITIALLIZ
Wait 60 seconds then reboot
Sadly no matter what I do that last menu option simply does not exist on my phone.
This fails on Android 4.1.2 which was on my phone when I started so I recently got a stock 4.1.1 ROM which the tutorials said was necessary. So I rooted my phone, installed ClockworkMod recovery so now when I go into recovery mode I get that CWM. I then used that to install a pre-rooted 4.1.1 build and tried to do the above SIM unlock method and it sadly it failed again in the exact same way. Option 4, NW Lock NV Data INITIALLIZ does not exist.
Does anyone know of anything I can do to SIM unlock my phone? Anyone know of any specific links to firmware and or OS ROM images that they know installs an OS that this works on? Are there apps one can run as root that will unlock? Remember I can't use anything that goes through Samsung because it ends up being incorrect.
Thanks for the help.
-mike
Your rom version has nothing to do with it. Your modem must be 4.1.1, but it wont work if youve ever updated to 4.3.
The code you got is not wrong. Especially if you got the same one from two sources. Its based on your imei so every decice has its own unique unlock code.
There's a thread in AT&T forums where someone posted a way to get it to work if having problems. Its at the end of an unlock thread in the General section I think. See if you can find and try that.
Hope it helps.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Your rom version has nothing to do with it. Your modem must be 4.1.1, but it wont work if youve ever updated to 4.3.
Click to expand...
Click to collapse
Can anyone explain to me what the 4.3 update does that stops this unlock proceeding? Surely the update can be removed.
Hey guys, recently bought a N910V 'GSM unlocked' from the US to NZ so I can save myself a bit of money. Holy **** i was wrong.
I've spent 3 days so far trying to fix it because of no signal, carrier searching error etc.
Its currently Boot loader unlocked, Custom ROM installed, Modem flashed. Still nothing :crying:
Only thing left I can think of is messing with CSC, EFS, QCN (started learning 3 days ago so pls excuse my newbiness :silly: )
Could someone with experience please point me in the right direction and pull me out of this world of trouble?
p.s IMEI is clean and I haven't deleted any partitions.
Apolleon said:
Hey guys, recently bought a N910V 'GSM unlocked' from the US to NZ so I can save myself a bit of money. Holy **** i was wrong.
I've spent 3 days so far trying to fix it because of no signal, carrier searching error etc.
Its currently Boot loader unlocked, Custom ROM installed, Modem flashed. Still nothing :crying:
Only thing left I can think of is messing with CSC, EFS, QCN (started learning 3 days ago so pls excuse my newbiness :silly: )
Could someone with experience please point me in the right direction and pull me out of this world of trouble?
p.s IMEI is clean and I haven't deleted any partitions.
Click to expand...
Click to collapse
Do you need a sim card for the carrier you're trying to use?
douger1957 said:
Do you need a sim card for the carrier you're trying to use?
Click to expand...
Click to collapse
Yes i do. i have been trying with two different carriers/sim.
Do you have the proper APN?
Sent from my SM-N910V using Tapatalk
Apparently you need to activate the phone with a verizon sim card first before any other gsm cards will work in it.
Sim just arrived and nope still no signal even with factory reset activating it with a verizon sim