Related
Hi
i figured out how to update my original firmware of 4.1.1 on my Note 2 N7105 LTE to 4.1.2 by downloading this tar.md5 (N7105XXDLL4_N7105TMHDLK8_TMH) through Odin
and it seemed to work because in "about device" it says im running 4.1.2 and it also seems to be a REALLY annoying European T-Mobile version because of the short and LOUD t-mobile video every single time i open and close my phone.
I also installed CWM-based Recovery v6.0.1.5-jb which works perfectly (thank god)
now when i tried to boot the deodexed rom for N7105XXDLL4 through recovery via sd card. everything seems fine i can choose all the options in sequence and when i get to the end it tries to install (percentage bar) but stops very quickly and reboots me to recovery mode...the first time i did that it forced me to restore from backup (because it wouldnt boot at all) and the second time i did it it made me reboot and the samsung logo appeared followed by "android is upgrading 0 to 162" I WAS SUPPPPER HAPPPPY!! but i was crossing my fingers...low and behold the phone did boot but all the fonts and everything else were EXTREMELY tiny and a message kept popping up saying SystemSU has closed or something..
I obviously restored back to t-mobile 4.1.2 (hungarian)
Is there something wrong im doing during the installation? should i try and upload it through odin or something instead of through my sd card??and how do you do that?? i mean it cant be the wrong deodexed because i chose the first one for xxdll4 and it the installation does boot on my phone..
i mean everything looks great except for the fact that it stops at the beginning of installation and reboots me to recovery prematurely....
ANY HELP???!!!! THANKS!!!
Proced a factoty reset, erase format all except SD Csrd in CWM optiond.
Install TWRP via CWM
Install update uding TWRP
pirata****zu said:
Proced a factoty reset, erase format all except SD Csrd in CWM optiond.
Install TWRP via CWM
Install update uding TWRP
Click to expand...
Click to collapse
id be more than HAPPY to thank you!! trust me!! :good:
considering im a tad of a noob..
can you refer to a link or a bit more details on how to proceed with all this??
and also what will this all do for me??
in the end i want 4.1.2 and a custom rom to replace the 4.1.2 tmobile that i already have. and obviously keep some sorth recovery (i already have cwm) other than android recovery 3e.
when i boot recovery mode when i go to wipe data/factory reset
i dont have an option to erase all except sd card...
how do i install twrp?? where is it? and what is it??
install what update using TWRP?? the custom rom?? or another 4.1.2 update??
sorry im trying to understand all this....
TWRP is other kind of recovery. Try a fredh install using it.
http://forum.xda-developers.com/showthread.php?t=1956939
But, before, wipe/factory reset using CWM
Install TWRP (.zip file) using CWM
Reboot recovery
Install new tom using TWRP
pirata****zu said:
TWRP is other kind of recovery. Try a fredh install using it.
http://forum.xda-developers.com/showthread.php?t=1956939
But, before, wipe/factory reset using CWM
Install TWRP (.zip file) using CWM
Reboot recovery
Install new tom using TWRP
Click to expand...
Click to collapse
i just installed openrecovery-twrp-2.4.0.0alpha-t0lte.img.tar using ODIN
without doing any factory reset or anything through CWM and it worked...is that bad? im going to try and load rom now....
ari770 said:
i just installed openrecovery-twrp-2.4.0.0alpha-t0lte.img.tar using ODIN
without doing any factory reset or anything through CWM and it worked...is that bad? im going to try and load rom now....
Click to expand...
Click to collapse
now im stuck what are the steps to install deodexed rom in TWRP?? or any rom for that matter....
if i go and press install and select rom file and swipe to comfirm flash,it stops and says "failed" in red
E:/unable to open zip file etc etc
ari770 said:
now im stuck what are the steps to install deodexed rom in TWRP?? or any rom for that matter....
if i go and press install and select rom file and swipe to comfirm flash,it stops and says "failed" in red
E:/unable to open zip file etc etc
Click to expand...
Click to collapse
So i finally got it to run deodexed installation on TWRP..i have no idea how lol...i wiped cache and delvik cache and it ran and installed and rebooted
the only issue is that i dont see any difference at all...except for the fact that there is no tmobile video when i restarted my phone...
how do i know if deodexed is installed??? i dont even have phone record..and it gave me the option to install it and its not there...hmmmm
im so lost....
btw how to i get to customize this new rom??
thanks
I've been having some trouble trying to boot the latest AOKP for some reason, clean install didn't work so I restored a backup from recovery. After that, TWRP asked me for a password soon as I got into recovery. This is the first time I've seen this..and I figure that reflashing the recovery should be all I need to do, then I should be able to reflash AOKP and enjoy, right? Problem is, I can't find a .tar file as goo.im doesn't appear to want to give me the file. :crying:
So before I spend the rest of my day off on a wild chase for a simple file, can anyone tell me if I'm going about this the right way? My searching the issue hasn't yielded much in the way of results. Just want to get my phone back up and running!
EDIT:
I wasn't being clear enough. Despite restoring my backup, it force closed one thing or another every few seconds so I went to recovery to reflash. That's when things failed because of this password. I'm limited to download and recovery modes now, which isn't bad except for I still can't find a .tar to flash via Odin.
Reflashing TWRP hasn't resolved the password issue. Looks like I need to find a new angle..
what version are you on? did you just flash that same version?
Was at 2.5.0.0, and yes I reflashed the same one. I can't remember which version I was on before this one. Any recommendations?
perhaps revert to the previous release. if you're d2att, here's the link to the 2.4.4.0 tar
This version throws the same password prompt. I never set a password for this..didn't even know it was an option
Medlock87 said:
This version throws the same password prompt. I never set a password for this..didn't even know it was an option
Click to expand...
Click to collapse
Just went through trying different versions all the way back to 2.3.3.1 which I know I used for quite a while without any trouble. I want to try CWM but I can't find it in .tar form, just .img
WOW!! I found CWM version 5.8.4.7 on my computer's HDD, and so I flashed it. CWM wouldn't mount my external sd card where my ROM zips are. Got tired of messing with that and so I flashed back TWRP and it came back with the same password prompt. Great... Guess I'm flashing back to stock and starting over.
Medlock87 said:
Just went through trying different versions all the way back to 2.3.3.1 which I know I used for quite a while without any trouble. I want to try CWM but I can't find it in .tar form, just .img
Click to expand...
Click to collapse
follow this link to the root from recovery thread. download the root kit and flash the recovery.tar.md5 file. its an older cwm so after flashing, you have the option to download and flash a recovery flashable twrp zip (to see if that fixed the password issue) or remain on cwm and download/flash a new release
follow the link in my signature. at the bottom of post #2 are the download links for the latest releases to both cwm and twrp. flash in recovery, go to advanced and reboot recovery. presto
---------- Post added at 02:30 PM ---------- Previous post was at 01:48 PM ----------
that resolve your issue? cheers
xBeerdroiDx said:
follow this link to the root from recovery thread. download the root kit and flash the recovery.tar.md5 file. its an older cwm so after flashing, you have the option to download and flash a recovery flashable twrp zip (to see if that fixed the password issue) or remain on cwm and download/flash a new release
follow the link in my signature. at the bottom of post #2 are the download links for the latest releases to both cwm and twrp. flash in recovery, go to advanced and reboot recovery. presto
Click to expand...
Click to collapse
Thanks for that. Flashed a CWM 6.0.3.1 flashable zip after that, and now it's giving me an error trying to flash my ROM zip.. Status 7. Going to try redownloading it..
Update: "Install from sdcard complete." Was starting to think I'd never see those words. I'm sure it'll work now. Thanks so much for your time!
Grrr...It's still doing the same thing that started this adventure. Gets stuck at the underwear kernel loading screen and won't boot up.
CWM and TWRP nandroids are different. If you make a backup with TWRP you cant restore with CWM, and vice versa.
if you're still getting stuck on the loading screen, wipe data/factory reset in recovery and wipe cache. reboot and see if that fixes your issue
xBeerdroiDx said:
if you're still getting stuck on the loading screen, wipe data/factory reset in recovery and wipe cache. reboot and see if that fixes your issue
Click to expand...
Click to collapse
I've tried this many times, nothing's working. I got fed up and used ODIN to go back to stock, and now even THAT won't boot. Went to download, again flashed CWM and tried wiping cache, did a factory reset and fixed permissions. It STILL won't boot. I can't figure out what I did wrong to save my life. This all started with the same wipe procedures I always take when updating AOKP. I'm completely lost right now..
Maybe I spoke too soon. It went from the Samsung GSIII logo to the AT&T logo with startup sound after a long time..now it's sitting here at Samsung for..a long time. Maybe I haven't been giving it enough time.
When you use ODIN to flash back to stock, you usually have to boot into stock (not custom) recovery to wipe data and wipe cache. Otherwise the phone sits at the Samsung logo.
xBeerdroiDx said:
When you use ODIN to flash back to stock, you usually have to boot into stock (not custom) recovery to wipe data and wipe cache. Otherwise the phone sits at the Samsung logo.
Click to expand...
Click to collapse
So, boot into download mode and that will wipe cache? I'm not sure I understand. And you were right, it hasn't progressed past the samsun logo.
No, boot into the stock recovery mode that comes on the device. Don't flash the stock firmware and then flash cwm in order to wipe data and wipe cache. Just flash stock in ODIN with the auto reboot box unticked, when you get the PASS, unplug, pull battery, replace and immediately press the recovery mode button combo. This will place you in stock (Samsung) recovery. That's when you wipe data/factory reset and wipe cache. Reboot. It will take a few minutes to boot initially
xBeerdroiDx said:
No, boot into the stock recovery mode that comes on the device. Don't flash the stock firmware and then flash cwm in order to wipe data and wipe cache. Just flash stock in ODIN with the auto reboot box unticked, when you get the PASS, unplug, pull battery, replace and immediately press the recovery mode button combo. This will place you in stock (Samsung) recovery. That's when you wipe data/factory reset and wipe cache. Reboot. It will take a few minutes to boot initially
Click to expand...
Click to collapse
Will report in a few minutes. Thanks again for taking the time to help =)
When I went to recovery it showed the android guy with the little gearboxes. I guess that's what I was looking for? It rebooted by itself and now I'm just waiting for it.
Yup, that's what stock recovery looks like. Were you able to wipe data and cache before the reboot?
I have a Samsung Galaxy S3 SGH-I747 (AT&T) that I updated OTA to 4.1.1 a while back. I just decided to root the phone using Odin3 V3.04 and clockworkmod.tar. I tried using clockworkmod at first but couldn't get the phone to go into CWM recovery mode. It just went into stock recovery instead. Reading further, I was told that I need to flash fixboot.tar first, then clockworkmod.tar, then flash CWM_SuperUser_3.0.7.zip file in recovery mode. When I used odin to flash fixboot.tar and rebooted, it boots the Galaxy S3 logo, at&t chime, then goes black with Amber light. It will not boot fully. I then used Odin to flash clockworkmod.tar, rebooted and it also went to blackscreen.I was then able to go into recovery mode and flash the Superuser zip file and reboot but I'm still getting the black screen. What did the fixboot.tar file do to my phone?? Can I reverse this without flashing a whole new rom? I have search the forum for severalhours now with no luck. Any help would be great.
where did you get your initial information and tar? as well as the fixboot info and tar?
check out this rooting thread here on xda. the purpose is to flash cwm recovery onto your device. you then boot into the custom recovery you just installed and root from there. instructions are on the thread.
recovery mode is: vol up + home + power. release just the power button when your device vibrates
xBeerdroiDx said:
where did you get your initial information and tar? as well as the fixboot info and tar?
check out this rooting thread here on xda. the purpose is to flash cwm recovery onto your device. you then boot into the custom recovery you just installed and root from there. instructions are on the thread.
recovery mode is: vol up + home + power. release just the power button when your device vibrates
Click to expand...
Click to collapse
I got it from this link - http://rootgalaxys3iii.com/root-at-t-galaxy-s3/
I am aware of the process you mentioned, but it would not work. It just kept going into standard recovery mode instead of custom recovery so I could never root from there. Thats when I came across this link and thought I needed to flash fixboot.tar first as it states. It did work! I was able to flash clockworkmod.tar and then root the phone, but what good does that do now that my phone is hosed at the blackscreen...There were two sites that said to use this fixboot method. I should have known better...
I just read your thred. Looks like my problem was letting the phone reboot. Is there any way to reverse the fixboot.tar I used? Maybe there is a 4.1.1 boot.tar that can put things back as they were?
via the link i provided, in odin, were you unticking the "auto reboot" box?
i've used that thread method on several S3's with no problems. if you were getting a PASS message then it actually worked.
can you get into recovery now? if so, wipe data/factory reset and wipe cache. reboot.
xBeerdroiDx said:
via the link i provided, in odin, were you unticking the "auto reboot" box?
i've used that thread method on several S3's with no problems. if you were getting a PASS message then it actually worked.
can you get into recovery now? if so, wipe data/factory reset and wipe cache. reboot.
Click to expand...
Click to collapse
I used that method from another site and I was getting a pass. It looks like my issue was letting it reboot. When it didn't go into CWM recovery,I used the fixboot.tar and thats when my phone would not boot past the boot screen. I still have some unsaved material and don't want to wipe the phone. I can get into CWM recovery now. Will doing a data/factory reset wipe everything? If so, is that my only option at this point? I don't want to go to factory and lose everything unless I have to.
OpusxXx said:
I used that method from another site and I was getting a pass. It looks like my issue was letting it reboot. When it didn't go into CWM recovery,I used the fixboot.tar and thats when my phone would not boot past the boot screen. I still have some unsaved material and don't want to wipe the phone. I can get into CWM recovery now. Will doing a data/factory reset wipe everything? If so, is that my only option at this point? I don't want to go to factory and lose everything unless I have to.
Click to expand...
Click to collapse
Well, since I got no response, I did what you said and deleted everything. I still have the same problem. Phone boots to Samsung logo, does jingle and geos to blackscreen with blue light.
Back to my original question. I used the fixboot.tar and it jacked my phone where it only boots to blackscreen with blue light. Is there a fix for this???
Hey guys,
I had a rooted Galaxy Wonder with a custom Rom (TouchWiz, forgot which version). I had CWM 5 and wanted to Install CWM 6 so I can be able to get the Kitkat 4.4 Rom, but unfortunately I soft bricked it. I flashed a custom Rom using Odin 4.43 Multi Downloader and it successfully passed, but with a problem, it doesn't get to the Homescreen and it keeps of rebooting itself all over again. I can get to download mode and to stock recovery. So I thought I could maybe root it again and install CWM 6 to flash the rom.
Now the problem is that when I use the stock recovery (by Holding Vol Up+Home+Power) I don't get to install the root update.zip because it reboots itself after I press the menu button (it writes something about updating then reboots).
What can I do? Is there anyway to Root the device via Odin and install CWM 6 so I can flash a custom rom?
Help!
Thanks in advance!
AytchG said:
Hey guys,
I had a rooted Galaxy Wonder with a custom Rom (TouchWiz, forgot which version). I had CWM 5 and wanted to Install CWM 6 so I can be able to get the Kitkat 4.4 Rom, but unfortunately I soft bricked it. I flashed a custom Rom using Odin 4.43 Multi Downloader and it successfully passed, but with a problem, it doesn't get to the Homescreen and it keeps of rebooting itself all over again. I can get to download mode and to stock recovery. So I thought I could maybe root it again and install CWM 6 to flash the rom.
Now the problem is that when I use the stock recovery (by Holding Vol Up+Home+Power) I don't get to install the root update.zip because it reboots itself after I press the menu button (it writes something about updating then reboots).
What can I do? Is there anyway to Root the device via Odin and install CWM 6 so I can flash a custom rom?
Help!
Thanks in advance!
Click to expand...
Click to collapse
I flashed a custom Rom using Odin 4.43 Multi Downloader and it successfully passed, but with a problem, it doesn't get to the Homescreen and it keeps of rebooting itself all over again.
Click to expand...
Click to collapse
Did you do a full wife before you install a new custom ROM? I guess not.
So I thought I could maybe root it again and install CWM 6 to flash the rom.
Click to expand...
Click to collapse
You don't need to root it again since it's already rooted (when you first installed TouchWiz) and it's not the cause i think.
Now the problem is that when I use the stock recovery (by Holding Vol Up+Home+Power) I don't get to install the root update.zip because it reboots itself after I press the menu button (it writes something about updating then reboots).
Click to expand...
Click to collapse
I think your phone is still rooted that's why your having that problem.
So, your problem is that, you believed your phone is not rooted anymore?
dec0der said:
Did you do a full wife before you install a new custom ROM? I guess not.
You don't need to root it again since it's already rooted (when you first installed TouchWiz) and it's not the cause i think.
I think your phone is still rooted that's why your having that problem.
So, your problem is that, you believed your phone is not rooted anymore?
Click to expand...
Click to collapse
Well, I didn't know if it is rooted or not and I don't know how to flash Cwm 6 and I can't use the phone normally since it is not able to turn on to the Homescreen.
Don't mind the older custom Rom, it was flashed successfully and I used it for more than 3 months.
AytchG said:
Well, I didn't know if it is rooted or not and I don't know how to flash Cwm 6 and I can't use the phone normally since it is not able to turn on to the Homescreen.
Don't mind the older custom Rom, it was flashed successfully and I used it for more than 3 months.
Click to expand...
Click to collapse
Which recovery can you enter now? cwm or stock recovery?
dec0der said:
Which recovery can you enter now? cwm or stock recovery?
Click to expand...
Click to collapse
Stock, but can't do anything in it. I get the White box icon with the yellow arrow and android and press the menu button but then it says updating Application then some things that I can't read because the go quickly and something about can't access (some directory in system) and Update successful and rebooting.
It keeps doing that.
AytchG said:
Stock, but can't do anything in it. I get the White box icon with the yellow arrow and android and press the menu button but then it says updating Application then some things that I can't read because the go quickly and something about can't access (some directory in system) and Update successful and rebooting.
It keeps doing that.
Click to expand...
Click to collapse
Okay, lets try this one first. Install CWM recovery 6.x
Download the following files (make sure its not corrupted files)
Odin Multi Downloader v4.44 HERE
ClockworkMod v6.0.4.5 HERE MD5 Sum: 144ce4ffcf9f577e7e12562f3c5579d3 (extract after download)
Ancora.ops HERE MD5 Sum: 65831d136621d6d550d2a11a2e8111f3 (extract after download)
And follow this flashing guide.
guide 1 and guide 2
Note: On the guide 1, do step 2-6 only. step 6 that says
6.Click on the One Package-Button and select the downloaded MD5-file.
Click to expand...
Click to collapse
, your MD5 file will be recovery-clockwork-6.0.4.5-ancora.tar.md5
If it was successful, try to enter CWM recovery then.
dec0der said:
Okay, lets try this one first. Install CWM recovery 6.x
Download the following files (make sure its not corrupted files)
Odin Multi Downloader v4.44 HERE
ClockworkMod v6.0.4.5 HERE MD5 Sum: 144ce4ffcf9f577e7e12562f3c5579d3 (extract after download)
Ancora.ops HERE MD5 Sum: 65831d136621d6d550d2a11a2e8111f3 (extract after download)
And follow this flashing guide.
guide 1 and guide 2
Note: On the guide 1, do step 2-6 only. step 6 that says , your MD5 file will be recovery-clockwork-6.0.4.5-ancora.tar.md5
If it was successful, try to enter CWM recovery then.
Click to expand...
Click to collapse
Now when I enter the recovery mode I get a black blank screen.
AytchG said:
Now when I enter the recovery mode I get a black blank screen.
Click to expand...
Click to collapse
cwm recovery 6.x or still stock? we need either one them to work.
dec0der said:
cwm recovery 6.x or still stock? we need either both to work.
Click to expand...
Click to collapse
None. Just a black screen
Edit: I tried flashing now cwm 5 instead of 6 and it worked. I can boot to cwm 5 recovery. But still is there anyway to flash cwm 6?
AytchG said:
None. Just a black screen
Edit: I tried flashing now cwm 5 instead of 6 and it worked. I can boot to cwm 5 recovery. But still is there anyway to flash cwm 6?
Click to expand...
Click to collapse
Just download Phil's Advanced CWM recovery, and flash it (CWM recovery 6.0.4.5) Flash the recovery like any else recovery you flashed.
Download the .op and the cwm recovery (Flashable via odin multi downloader ) Here
And make sure you are running Windows 7, and not Windows 8, I have experienced problems flashing recovery on Windows 8 64bit
AytchG said:
None. Just a black screen
Edit: I tried flashing now cwm 5 instead of 6 and it worked. I can boot to cwm 5 recovery. But still is there anyway to flash cwm 6?
Click to expand...
Click to collapse
I flashed a custom Rom using Odin 4.43 Multi Downloader
Click to expand...
Click to collapse
this might be the cause, so we need do clean wipe of all the data/ files in your internal storage. We need to make it boot first since it's not just a recovery problem but ROM.
Do you still have the touchwiz rom in your external sd-card? If it's still there, do this steps in cmw:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
install touchwiz
reboot
dec0der said:
install touchwiz (and gapps if you have)
reboot
Click to expand...
Click to collapse
If its touchwi5, you dont have to install gapps, they are already in there
MayB4ck said:
If its touchwi5, you dont have to install gapps, they are already in there
Click to expand...
Click to collapse
Corrected. Never knew gapps was already integrated w/ that ROM, never tried it
MayB4ck said:
Just download Phil's Advanced CWM recovery, and flash it (CWM recovery 6.0.4.5) Flash the recovery like any else recovery you flashed.
Download the .op and the cwm recovery (Flashable via odin multi downloader ) Here
And make sure you are running Windows 7, and not Windows 8, I have experienced problems flashing recovery on Windows 8 64bit
Click to expand...
Click to collapse
Thanks! I flashed this Phil's Cwm and then flashed the cm 11 Kitkat 4.4 and gapps and it is working!! Thank you!
dec0der said:
this might be the cause, so we need do clean wipe of all the data/ files in your internal storage. We need to make it boot first since it's not just a recovery problem but ROM.
Do you still have the touchwiz rom in your external sd-card? If it's still there, do this steps in cmw:
select "wipe data / factory reset"
go to "mounts & storage" and format /system. This is extremely important!
under the same menu, format /sdcard0 (be careful NOT to format /sdcard1 by mistake)
install touchwiz
reboot
Click to expand...
Click to collapse
I tried MayB4ck's idea and it worked! Thanks for your help!!! I really appreciate it!
Solved
AytchG said:
I tried MayB4ck's idea and it worked! Thanks for your help!!! I really appreciate it!
Click to expand...
Click to collapse
I am very happy to solve your problem sir Have a nice day
My Tab 3 10.1 in TWRP boot loader. I cleaned the all the files in the recovery mode including data, system, dalvik and cache. Now i am not able to connect to odin via computer. All my other samsung devices are recognized in odin except the TAB. I tried installing customs rom but it doesn't install and keep booting back to recovery mode.
Kindly tell if i can connect my tab to odin and flash stock rom.
Vipul Jain said:
My Tab 3 10.1 in TWRP boot loader. I cleaned the all the files in the recovery mode including data, system, dalvik and cache. Now i am not able to connect to odin via computer. All my other samsung devices are recognized in odin except the TAB. I tried installing customs rom but it doesn't install and keep booting back to recovery mode.
Kindly tell if i can connect my tab to odin and flash stock rom.
Click to expand...
Click to collapse
See this thread and follow the steps. Also - uncheck autoreboot in ODIN. After flashing is done, shutdown tablet and reboot into recovery to flash superuser
Good luck
OKAstro said:
See this thread and follow the steps. Also - uncheck autoreboot in ODIN. After flashing is done, shutdown tablet and reboot into recovery to flash superuser
Good luck
Click to expand...
Click to collapse
My tab is not getting connected to computer via odin or any other mode.
Vipul Jain said:
My Tab 3 10.1 in TWRP boot loader. I cleaned the all the files in the recovery mode including data, system, dalvik and cache. Now i am not able to connect to odin via computer. All my other samsung devices are recognized in odin except the TAB. I tried installing customs rom but it doesn't install and keep booting back to recovery mode.
Kindly tell if i can connect my tab to odin and flash stock rom.
Click to expand...
Click to collapse
Twrp are not boot loader, TWRP are recovery. And did you try to reinstall samsing usb drivers? It might work out though, and Please tell me the full details, including what you did from the beginning.
Jacker31 said:
Twrp are not boot loader, TWRP are recovery. And did you try to reinstall samsing usb drivers? It might work out though, and Please tell me the full details, including what you did from the beginning.
Click to expand...
Click to collapse
All right. I rooted my tab using twrp. It was working fine for a week. By mistake i wiped the data, system, cache and every other thing using the advanced wipe mode in twrp. After wiping, my system doesnt recognise my tab, everytime i restart my tab it goes in recovery mode and gets stuck.
Vipul Jain said:
All right. I rooted my tab using twrp. It was working fine for a week. By mistake i wiped the data, system, cache and every other thing using the advanced wipe mode in twrp. After wiping, my system doesnt recognise my tab, everytime i restart my tab it goes in recovery mode and gets stuck.
Click to expand...
Click to collapse
Have you tried ADB side load?
Jacker31 said:
Have you tried ADB side load?
Click to expand...
Click to collapse
Yes. But no use
Vipul Jain said:
Yes. But no use
Click to expand...
Click to collapse
did you reinstall samsung driver?
Jacker31 said:
did you reinstall samsung driver?
Click to expand...
Click to collapse
Yes, Used 3 diff systems.
Have you tried using Samsung KIES? I know there are some who don't like it, but I have used it with no problem.
OKAstro said:
Have you tried using Samsung KIES? I know there are some who don't like it, but I have used it with no problem.
Click to expand...
Click to collapse
Tried and failed
Vipul Jain said:
Tried and failed
Click to expand...
Click to collapse
One more idea - unplug phone from PC, uninstall KIES, uninstall Samsung drivers, reboot phone, reboot PC, reinstall drivers...check if tab is then recognized. I've had to do this occasionally...but maybe you've tried this too.
If that doesn't work, uninstall them again, reboot, install Samung KIES and let it install the drivers. Then connect phone and see if tab is recognized.
Good luck