I ask for help, they are holding a smartphone LG model G3 d855, I installed by mistake rom different terminal and now will not turn on, does not go into recovery mode, does not go into Download mode, the screen remains completely black !!!!
If I insert charging does not light up No lights, if I connect it to the pc with Win 7 recognizes it as: Qualcomm HS-USB QDLoader 9008.
I ask for help in you, I can do something or I have to bring it to service ??
Thank you very much:crying::crying::crying::crying::crying:
sabato64 said:
I ask for help, they are holding a smartphone LG model G3 d855, I installed by mistake rom different terminal and now will not turn on, does not go into recovery mode, does not go into Download mode, the screen remains completely black !!!!
If I insert charging does not light up No lights, if I connect it to the pc with Win 7 recognizes it as: Qualcomm HS-USB QDLoader 9008.
I ask for help in you, I can do something or I have to bring it to service ??
Thank you very much:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I am affraid you have a total Brick,only sollution ,new motherboard:crying:
hi , read this: http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
twisted_twice said:
hi , read this: http://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
Click to expand...
Click to collapse
Thanks, I've read this post and I will stop the screen that you place else, as if something was missing in the program or you must connect the g3 via RS232 serial ...
Hi. I just quoted what I read. I `be never been in your situation. I think you should keep searching.
Related
Hello Friends,
I tried flash Jasmin ROM on My Friend LG G3 phone but apparently, the rom installation didn't successed..
Now, the G3 shows only red and blue lights. I can't enter to Download nor Recovery Modes cwith the buttons and my computer recognize the phone as Forge HS-USB QLoader 9008.
I don't know what to do.
Thanks A Lot.
Yuval
There is a possible solution, http://forum.xda-developers.com/lg-g3/help/lg-g3-unbricking-steps-clarification-t3119844/
Look at the parts after they get their phones to that state you have.
So yesterday i tried flashing super LTE lollipop and being the stupid person that i am i flashed the E980 version instead of the actual version E986 (which i found later by removing the battery :| )
When rebooting the phone the home button is constantly on while the screen backlight turns on and then off again and again.
No lg logo, no recovery and no download mode.
Only when i plug in the phone to my pc it detects it as lg androidnet usb serialport and not Qualcomm HS-USB QDLoader 9008 like in other threads. Can i still get stock rom back? help much appreciated.
Edit: Okay i don't know why but apparently when i pressed vol + and vol - simultaneously and then connected the usb to pc despite showing a black screen it actually was download mode because using Lgflashtools i managed to install stock jelly bean. And i thought i was full hard bricked :/
reserved.
mine is detected as Qualcomm HS-USB QDLoader 9008 but nobody has achived to get live my OGPro...
Have you found the required TOT file and DLL?
I am having the same problem with LG G Pro e98820c after flashing wrong rom and unplug USB during flashing process.
Now the phone is stuck at Brick qualcomm hs-usb qdloader 9008 mode. I have some tools such as Smart diagnosis tool, BoardDiag, Androidbrick, Qfil/QPST ....But I have no proper guide how to use them to unbrick qualcomm hs-usb qdloader 9008 mode.
Have you got a solution for your brick phone.
Thanks , Sho Thant.
Howdy all
So! Like a idiot I flashed a d855 rom on it when twrp was working.
Now I get black screen no download mode no twrp nothing.
The quadcom pin out will not work at all.
The only thing I have working is in device manager it is showing as
LGE AndroidNET USB Serial Port (Com41)
Only phone I have so any help with this dam problem (if anything can be done) would be great thanks.
Do you get any flashing LEDs? up top the display?
At least factory restore works? Vol down + power?
Try to connect USB while holding vol up. If nothing happens but you pc detects it, press vol up about 5 times. It should get a Qualcomm port on device manager. At least for me it did...
Also you might want to install Qualcomm drivers: qualcomm hs-usb qdloader 9008 32/64 bit versions.
I would highly suggest to use a Windows 7 machine because for my d855 everything worked like a charm, unlike 8.1.both fully updated
Take a look at https://forum.xda-developers.com/lg-g3/general/fix-unbrick-lg-g3-stuck-qualcomm-hs-usb-t2933853
Whenever I put the battery on my redmi 1S MI logo keep restarting in every 2 seconds and and the fastboot mode also do this . After that I tried that test point method.and after that I discovered that my battery died and it is not charging then after some days I bought a new battery and while continuing the process I got the error "specified resources or device is not available" in 18 seconds of process in mi flash tool. when the qualcomm hs-usb loader 9008 port convert into Qualcomm hs usb 9006. Now my device is stuck in EDL mode no display black screen no response on and volume up down power button and when I connect the phone to PC it detects as the Qualcomm HS USB 9008 port.and when I connect the phone to the charger of PC without battery the red LED Notification light just blinks one time. Now please help me I got one and only the phone. And now I can't buy a new phone please suggest me away to get out of this problem. What do you think my phone hard bricked???.
:crying:
parag2001 said:
Whenever I put the battery on my redmi 1S MI logo keep restarting in every 2 seconds and and the fastboot mode also do this . After that I tried that test point method.and after that I discovered that my battery died and it is not charging then after some days I bought a new battery and while continuing the process I got the error "specified resources or device is not available" in 18 seconds of process in mi flash tool. when the qualcomm hs-usb loader 9008 port convert into Qualcomm hs usb 9006. Now my device is stuck in EDL mode no display black screen no response on and volume up down power button and when I
connect the phone to PC it detects as the Qualcomm HS USB 9008 port.and when I connect the phone to the charger of PC without battery the red LED Notification light just blinks one time. Now please help me I got one and only the phone. And now I can't buy a new phone please suggest me away to get out of this problem. What do you think my phone hard bricked???.
:crying:
Click to expand...
Click to collapse
Hi @parag2001
Follow the steps its a similar problem like yours
Link
https://forum.xda-developers.com/redmi-1s/help/redmi-1s-bricked-t3788482
Hope it helps
Alan Jose said:
Hi @parag2001
Follow the steps its a similar problem like yours
Link
https://forum.xda-developers.com/redmi-1s/help/redmi-1s-bricked-t3788482
Hope it helps
Click to expand...
Click to collapse
I tried each and every version of Mi Flash tool but not the first one. On each versions the Qualcomm HS USB qdloader 9008 changed to 9006 but after 4or 5 seconds the loader reverts back to 9008 and the error happens.
Will try the first version of mi flash tool. Thanks.....
parag2001 said:
I tried each and every version of Mi Flash tool but not the first one. On each versions the Qualcomm HS USB qdloader 9008 changed to 9006 but after 4or 5 seconds the loader reverts back to 9008 and the error happens.
Will try the first version of mi flash tool. Thanks.....
Click to expand...
Click to collapse
Did u fixed it??
Alan Jose said:
Did u fixed it??
Click to expand...
Click to collapse
Nope .. but I am trying.. iam think ing to follow this
https://www.google.co.in/amp/s/www....e-the-right-kind-of-rom-qhsusb_dload_edl/amp/
Can it fix my device???
Please suggest me a way..
The day before yesterday,
My phone became bricked caused by any reason.
I cound download ROM by using Mi-flash or QFIL but nothing happened after successing ROM download.
When I pushed Power key more than 5sec ~ 30sec, it did not blink led nor vibrate, keep black screen,
And PC lost connection and recover it as "9008" again.
PC could always
detect my phone as "Qualcomm HS-USB QDLoader 9008".
How can I recover my phone?
Please help me escape from nightmare.
Josephjin said:
The day before yesterday,
My phone became bricked caused by any reason.
I cound download ROM by using Mi-flash or QFIL but nothing happened after successing ROM download.
When I pushed Power key more than 5sec ~ 30sec, it did not blink led nor vibrate, keep black screen,
And PC lost connection and recover it as "9008" again.
PC could always
detect my phone as "Qualcomm HS-USB QDLoader 9008".
How can I recover my phone?
Please help me escape from nightmare.
Click to expand...
Click to collapse
Flash again with qfil.
Palash9088 said:
Flash again with qfil.
Click to expand...
Click to collapse
I did more than 10times but the result was same.
Thanks,
Josephjin said:
I did more than 10times but the result was same.
Thanks,
Click to expand...
Click to collapse
u need to do unbrick using the deep flashing cable..
These links should help you.
https://forum.xda-developers.com/lenovo-zuk-z2/help/hard-bricked-trying-to-restore-twrp-t3747602
https://zukfans.eu/community/thread...-from-hard-brick-state-9008-mode-easily.3504/