CyanogenMod (pronounced /saɪ.'æn.oʊ.dʒɛn.mɒd/) is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices.
http://wiki.cyanogenmod.org/w/About
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Instructions
1. Download the zip(s) - firmware and Google Apps additional package (optional)
2. Download and flash a compatible recovery
3. Boot into recovery
4. First Flash: Wipe data, system & cache partitions and flash firmware --Afterwards you can dirty flash.
5. Flash Chainfire's SuperSu (required to have root)
6. Optional: install the Google Apps additional package
7. Reboot and profit
Known Issues:
NFC doesn't work.
You tell me.
NOTE!!! THIS WILL FORCE ENCRYPTION ON THE PHONE!!!
This ROM will encrypt your storage. I am only following CM's guidelines. If you don't want encryption, please flash with the ROM a different kernel that allows for encryption.
Once you have booted up on this ROM, if you want to go back to KitKat, you will first have to transfer the contents of your internal storage and SD Card to a PC or you will lose everything you have there.
2014-01-04
cm-12-20150104-UNOFFICIAL-hlte.zip --> DOWNLOAD
MD5: 03336a6af71afafb4024a5922ab0cb32
2014-01-05
cm-12-20150105-UNOFFICIAL-hlte.zip --> DOWNLOAD
MD5: 076d86556717117f471327a5f563e831
NEEDED PACKAGES
TWRP: http://forum.xda-developers.com/showthread.php?t=2467001
All TWRP recoveries for HLTE are here
This ROM works with any bootloader. It's the recovery, TWRP, that has to match the bootloader version in order for the device to correctly boot up.
GAPPS: https://s.basketbuild.com/filedl/gapps?dl=gapps-lp-20141109-signed.zip
SuperSU: http://forum.xda-developers.com/showthread.php?t=1538053 ---> Direct Download Link: http://download.chainfire.eu/641/SuperSU/UPDATE-SuperSU-v2.40.zip
All current and previous builds, kernels and fixes can be found HERE
Thanks to CyanogenMod team and Google
CHANGE LOG:
This list is not exhaustive. For a complete list of all merged changes please go here
2014-01-03: First build
- mtp fixes
- SElinux fixes
- Superuser: Don't set root access as a default fallback option.
- Buttons: set HOME wake key default as disabled
- ActivityManager fixes
- Fix null pointer exception - should fix most of the FC problems
- Lots of framework fixes
- QuickSettings: Add long click support
- Sepolicy fixes
- root disabled by default
2014-01-04
- Translations
- New terminal app
- Replace app-based superuser with the PG version
- Remove Superuser app
- SEpolicy fixes for new superuser
- su: Remove the superuser app
- su: Add Root access app-ops control
- su: Add an indicator when a 'su' session is active
- appops: Add support for SU
2014-01-05
- Many fixes. Too long to list here.
First?! Upload faster plz
waywardfrantz said:
First?! Upload faster plz
Click to expand...
Click to collapse
Ready!
Any special mods to this ROM?
Sent from my SM-N9005 using XDA Free mobile app
bigstunta101 said:
Any special mods to this ROM?
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
This is pure CyanogemMod 12 Android Lollipop. Any mods that work for CM 12 will work on this ROM.
Does NFC work on this rom?
troc240 said:
Does NFC work on this rom?
Click to expand...
Click to collapse
NFC doesn't work yet on any CyanogenMod ROM for the T-Mobile Note 3.
I just flashed this and it booted right away O____O
WOW. Thank you. Will await other user feedback, but definitely subscribed to this thread! Cheers and happy new year!
iynfynity said:
I just flashed this and it booted right away O____O
Click to expand...
Click to collapse
Does WIFI work?
10507 said:
Does WIFI work?
Click to expand...
Click to collapse
Yes, it works fine. Bluetooth too. Only NFC is not working.
Also the temperature and humidity sensors work OK.
T-Mobile Wifi Calling work on this ROM?
escavi said:
T-Mobile Wifi Calling work on this ROM?
Click to expand...
Click to collapse
I'm not sure if I just can't see it or there's no wifi calling for this ROM. I haven't tried that before.
Anyway, so far I haven't experienced any major issues with the ROM after using it for hours. Wifi works perfectly for me compared to the other Lollipop ROMS out there.
One minor issue, that may bother other people including me, is that the syncing of the Android browser bookmarks isn't working for this ROM. I only use the Android browser because of the Pie controls so I'm a little sad about this issue. Hope this gets fixed in the future. Thank you!
iynfynity said:
I'm not sure if I just can't see it or there's no wifi calling for this ROM. I haven't tried that before.
Anyway, so far I haven't experienced any major issues with the ROM after using it for hours. Wifi works perfectly for me compared to the other Lollipop ROMS out there.
One minor issue, that may bother other people including me, is that the syncing of the Android browser bookmarks isn't working for this ROM. I only use the Android browser because of the Pie controls so I'm a little sad about this issue. Hope this gets fixed in the future. Thank you!
Click to expand...
Click to collapse
Camera and video recording working for you as well?
10507 said:
Camera and video recording working for you as well?
Click to expand...
Click to collapse
Yes, both of them works. Front face camera works too.
An other LP ROM is coming, I am going to try, thanks.
Sent from my SM-N900T using XDA Free mobile app
New rom 2014-01-04
New ROM 2014-01-04 posted on the OP.
Enjoy!
miscom said:
CHANGE LOG:
This list is not exhaustive. For a complete list of all merged changes please go here
2014-01-03: First build
- mtp fixes
- SElinux fixes
- Superuser: Don't set root access as a default fallback option.
- Buttons: set HOME wake key default as disabled
- ActivityManager fixes
- Fix null pointer exception - should fix most of the FC problems
- Lots of framework fixes
- QuickSettings: Add long click support
- Sepolicy fixes
- root disabled by default
2014-01-04.
- Translations
- New terminal app
- Replace app-based superuser with the PG version
- Remove Superuser app
- SEpolicy fixes for new superuser
- su: Remove the superuser app
- su: Add Root access app-ops control
- su: Add an indicator when a 'su' session is active
- appops: Add support for SU
Click to expand...
Click to collapse
Do we still need to flash the SU if we are starting with 1/4 build? Also the only recovery I found via the link shows "4.4" at the end. Is that the right one? From Sept 29th?
Edit: the mirror for recovery is 12/22. Still shows 4.4
bobbyphoenix said:
Do we still need to flash the SU if we are starting with 1/4 build? Also the only recovery I found via the link shows "4.4" at the end. Is that the right one? From Sept 29th?
Edit: the mirror for recovery is 12/22. Still shows 4.4
Click to expand...
Click to collapse
Yes, as far as I know you'll have to flash SU to get root because root is not completely written as it was in CM11. I use Cyadelta to flash custom ROMs because it allows me also flash other zip files. It simplifies flashing. Then once CM nightlies are available it will will download the deltas for every new build and not the entire ROM.
In regards to 4.4 it depends. If you already have the latest bootloader from Samsung, i.e. you flashed any Samsung factory ROM version 4.4.2 then you need a 4.4 TWRP recovery to match the bootloader.
This ROM works with any bootloader. It's the recovery, TWRP, that has to match the bootloader version in order for the device to correctly boot up.
Related
Please read the changelog as it will be updated constant before posting.
* Screenshots: Post #3
* Download and Installation: Post #2
* Please do not report issues/enhancements here, use the issue tracker here
* ChangeLog and Features
MUST READ
Click to expand...
Click to collapse
* Absolutely NO XPOSED F/W or Modules supported. This is a daily driver ROM, with deep integration and modification of stock (Samsung) ROM, hence things will break, I assure you!. See FAQ for more detailed explanation as to why I will NOT support it.
* Do NOT install ChainFire SuperSU, as the ROM has built-in CM/Koush Superuser, which I will manage and update if necessary. (And SuperSU completely messes your system binaries, I have no idea what else is botched hence I will NOT support it).
* Follow the DEV thread rules, this IS a dev thread, if you cannot give possible debugging information (logcat, proper replication of the scenario) do NOT post here, go to the general thread here (TODO add link).
* I will only support Stock Kernel (it is included in the DOWNLOADS section), if you are having issues, I would recommend full wipe, flash ROM and flash the STOCK Kernel, reproduce the issue and use my github issue ticketing to report it.ISSUE Reporting Link
* This is daily driver stock themed ROM, if this is NOT what you are looking for I advice you to STOP and move on to another ROM, save that precious bandwidth.
* As this is distributed as a TWRP recovery install file, your KNOX is already at 0x1, duh! don't bother wasting a post whether it will trip KNOX or not.
* Since your KNOX is tripped, removed all KNOX bits does not make any sense.
* Do not ask for ETA, if and when time permits I will release any updates if there are. Use my github issue ticket tracker for any updates to issues. As I am pretty sure the thread will get derailed (and I will only watch it as time permits), creating an issue ticket is your best bet that it will get my attention.
* NO DPI changes supported, although it is available in Settings. A lot of MI7 TW apks are not built for multi-dpi and since I don't support xposed, you are on your own.
* Since the ROM is designed with SELinux Enforcing kernels like Stock Kernel, which also has additional restriction of not allowing adb root. ROM comes built-in with SSH enabled and defaults to root user. You can use the ssh add key in Settings -> Device -> Misc Device Settings to add the key and you can do all the operations untethered .
What is Embryo?
Click to expand...
Click to collapse
In short EMBRYO is your stock/OEM (samsung UVUBMI7 base) ROM, which will have the full support of you hardware (which will be very difficult for any after market ROM to achieve) overlayed with after market (CM/AOKP/SLIM) ROM features as time permits and which fancies my attention .
Needless to say, this is a extremely difficult task and requires very precise skill,understanding of a lot of moving parts (hence the MUST READ section entries) and a lot of patience (I mean a lot). Also I am a stickler for quality and it will show!.
Absolutely NO PERMISSION is given to post this in any other thread or kanging the work.
THEME
Click to expand...
Click to collapse
In the past I have themed EMBRYO roms, but due to time constraints this does not look like a possibility right now, maybe some time in the future. If any themers are willing to take a crack at it go for it and let me know, I will add the links here.
ChangeLog/Features/FAQ
Click to expand...
Click to collapse
They will all be logged here and updated as time permits:
* ChangeLog and Features
* FAQ
* Home Page
02-MAR-2014: EMBRYO-1.1
* bug fix: StatusBar data icon persistence
* bug fix: init.d scripts toggles were not taking effect.
* fix: removed custom carrier label preference.
DISCLAIMER
Click to expand...
Click to collapse
You are assuming all the risk for flashing this. You have been warned.
ISSUES
Click to expand...
Click to collapse
* NavBar transparency requires more work, so it will not work.
* Stock launcher in landscape layout needs fixes when navbar is enabled. I will take any patches
CREDIT
Click to expand...
Click to collapse
- Samsung for the UVUBMI7 base.
- Koush for Superuser (note: I have built it myself to ensure it works with TW roms)
- CM/AOKP/Slim aftermarket ROMs for borrowing various settings code and various inspiration
for adapting Samsung Implementation.
- Paul for the built-in File Chooser.
- Ericson for RootTools
XDA:DevDB Information
EMBRYO-NOTE3, a ROM for the T-Mobile Samsung Galaxy Note 3
Contributors
mohan_kr
ROM OS Version: 4.3.x Jellybean
Based On: TouchWiz - UVUBMI7
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-02-23
Created 2014-02-24
Last Updated 2014-02-23
Installation and Download
FULL ROM INSTALLATION
Click to expand...
Click to collapse
PLEASE FOLLOW THE STEPS EXACTLY AND IN THAT ORDER, do not try to be cute and invent your own process, nothing good is come out of that. Also, the only recovery I have tested is TWRP, no other recovery has been tested, so the installation instructions are tailored for TWRP only.This is full WIPE ROM Instructions, do NOT dirty flash it is NOT going to work.
Step 0) Make sure you are unplugged and fully charged (no USB or power)
Step 1) Make a Nandroid backup and better yet also TiBu if you need to restore apps.
Step 2) Did you do Step 1)???? Do it now, already.
Step 3) Make sure you downloaded the Full Wipe ROM on to your device.
Step 4) Please make sure to check the md5sum's.
Step 5) Boot into TWRP recovery.
Step 6) Select Wipe -> Swipe to Factory Reset
Step 7) Go Back to Wipe Screen -> Advanced Wipe -> Select System -> Swipe to wipe
Step 8) Did you do Step 6, 7? If not, STOP, do NOT proceed.
Step 9) Go Back to Main Screen -> Select Install Tile
Step 10) Select the Full Wipe ROM zip and flash.
Step 11) [OPTIONAL] If you need any bloat zips and add-ons if available add them now.
Step 12) [OPTIONAL] If there are any EMBRYO Update Zips you can add them now. (SHOULD BE LAST ONE ADDED)
Step 13) I Strongly recommend to Flash the Stock Kernel (MI7), the zip is in the Downloads
section.
Step 14) Good, now reboot and LET IT WAIT till everything is installed. Do NOT touch and mess around with any keys. Your installation should be fine, if you see the bootanimation and then installing applications screen shows up.
Step 15) At this point you might be prompted to allow SuperUser access to ROMCustomizer, select
allow.
Step 16) IMPORTANT Follow Any POST Installation stuff below.
EMBRYO UPDATES INSTALLATION
Click to expand...
Click to collapse
Installation is simple, as the update zip will be available as a TWRP flashable zip. Download to your device, boot into recovery and select install. That's it. If there are any special instructions, they will be in the section where the download zip is available.
POST INSTALLATION
Click to expand...
Click to collapse
Please do the following, after a full wipe installation. After the ROM boots:
1) If you missed the Superuser prompt for ROMCustomizer, please got to Superuser app and
grant privileges to ROMCustomizer.
2) Please NO restoring of system data that is a surefire way to bork the shiny new system.
3) SSH is enabled by default. To upload a public key, push it to your SDCARD and then go to Settings -> Device Tab -> Misc Device Settings -> Add Ssh Key.
DOWNLOADS
Click to expand...
Click to collapse
ROM
Click to expand...
Click to collapse
* [24-FEB-2014] [EMBRYO-1.0]: Please check the MD5SUM for all downloads on YOUR phone (not on the PC e.g). Please follow the installation instructions.
- SM-N900T-EMBRYO-1.0-FULL.zip
ROM UPDATES
Click to expand...
Click to collapse
* [02-MAR-2014] [EMBRYO-1.1-Update]: Please check the MD5SUM for all downloads on YOUR phone (not on the PC e.g). Please follow the installation instructions for updates in the section EMBRYO UPDATES INSTALLATION
- EMBRYO-1.1-update.zip
STOCK KERNEL
Click to expand...
Click to collapse
* [UVUBMI7] Stock Kernel TWRP flashable. SM-N900T-STOCK-UVUBMI7.zip
BLOAT
Click to expand...
Click to collapse
* [UVUBMI7] Samsung Bloat. APKS that are not installed as part of EMBRYO full rom. NOTE they are installed in system partition.
- UVUBMI7-Samsung-Bloat.zip
* [UVUBMI7][TMO] T-Mobile Bloat.
- UVUBMI7-TMO-Bloat.zip
Click to expand...
Click to collapse
Screenshots
See the attached thumbnails to this post.
Another One
final one.
Upload
Upload in Progress..as soon as it is up I will create a post. Patience.. see post #2.
This sounds like you out a ton of work into it. I definitely must give this a run.
Sent from my SM-N900T using Tapatalk
Download link
Post #2 has the download link..I will update the changelog/features to give more information on how to use the ROM. Enjoy!
mohan_kr said:
Upload in Progress..as soon as it is up I will create a post. Patience.. see post #2.
Click to expand...
Click to collapse
downloading now. . . feedback will follow
http://www.androidfilehost.com/?fid=23329332407573846
That's for the kernel for some reason the link you put there say's access denied when you go on it.
Sent from my SM-N900T using xda app-developers app
This is very very good. I really have no issues yet. It has a remarkable "wow" factor, even when installing. Very well done.
Sent from my SM-N900T using Tapatalk
Great job on this Rom!
Sent from my SM-N900T using XDA Premium 4 mobile app
Uploaded zip
Uploaded all the Samsung and T-Mobile APKS that are not included as part of the ROM. By default they will be installed in system partition. Since I did not investigate fully what can be moved to data. If you know that you can push the apks in /data/embryo/preload and use the Package Management from Settings -> Device to install them..
Is anyone running this how is it?..
Sent from my SM-N900T using Tapatalk
demon28 said:
Is anyone running this how is it?..
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
so far . . no issues here...
Question, can you go back to 4.3?
Sent from my SM-N900T using Tapatalk
demonchildfp said:
Question, can you go back to 4.3?
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Rom is 4.3
Yep.....I feel like a retard......
Sent from my SM-N900T using Tapatalk
Wow - this is quite a piece of work here. Had to take it for a spin - no issues to report but wanted to pop in and say holy crap man, this is awesome! The navbar stuff alone... it makes my head hurt. Far better than anything I could ever muddle together that's for sure. Glad you finally got the time to share this - work like this doesn't come around very often, so for that I say - thanks!
Great job man!
Downloading now.. maybe I can find some time and see if my themes are compatible and if not I can make em compatible. Sounds like a awesome rom
Does anybody have a copy or link to the stock kernal? It says access or no such file on the link provided in the o.p. thanks
CyanogenMod is discontinued.
This ROM is continued as a LineageOS ROM.
Check the G800F LineageOS ROM for more info.
This is a CyanogenMod 13.0 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y) by CTXz and hennymcc.
DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE
Although G800F and G800H share the same name they are not related in terms of hardware due to the different SoCs used (Exynos vs. Snapdragon).
Hence please do not ask for support or ROMs for the G800H.
Working features
Internal Root
Brightness slider
Option to use soft keys
Additional settings (Buttons menu in settings)
HW accelerated GUI
Camera (pictures+video: Back+Front)
MTP storage
Flash Light
Bluetooth (A2DP, HFP, HID)
IR
Lock Screen
Sound
SMS
Initiate and receive calls
Wifi
Mobile Data
USB-OTG (Keyboard, Mouse, USB-Audio, Mass-Storage)
NFC
Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
Light sensor (needed for auto-brightness)
Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
SD-Card as internal storage (new Android M feature)
GPS
Multi-Window support (new experimental CM setting, can be enabled via developer settings)
Fingerprint scanner
Non-working features:
SELinux
Known issues:
See the Bug Report section of this thread
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
Some users reported that their touch-screen stopped working permanently after some weeks of usage. For some user's (two at the moment including me) NFC stopped working permanently. Probably this issues are not related to this ROM as also many stock user's complain about hardware issues (random reboots, black screens, unresponsive touchscreen) but you have been warned.
Backup your data before flashing and check if the original firmware is present (e.g. at SamMobile)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Download:
Odin3-v3.07 (it is contained in CF-Auto-Root)
TWRP 3.0.0 recovery image [25/03/2016] (AndroidFileHost Mirror)
The newest CM 13.0 releases as well as the latest TWRP can be found here:
https://aykevl.nl/android
-Credit and thanks to @ayke
CM 13.0 ROM for G800F/M/Y (Android File Host)
Google Apps (contains Google Play, ...) for Android 6.0, one of the following two is recommended:
Open GApps Project, Platform:ARM, Android:6.0, Variant: whatever you prefer (e.g. "mini" or "nano")
Install recovery:
Reboot your device into Odin mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select PDA and select the recovery image (recovery.tar.md5)
Check that only "Auto Reboot" and "F. Reset Time" is set
Click on "Start": the kernel image should be flashed now and the device should reboot afterwards. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, power of your device. If not restart into Download mode and flash again or flash the stock rom.
Before you flash:
You need the latest TWRP recovery (see above). Otherwise TWRP might not be able to flash the ROM. This is because TWRP checks now if the device is "supported".
Wipe the device to avoid problems with remaining files from the old installation (see instructions below). This also applies if you already installed an older version of CM 13.0.
Flash CyanogenMod:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
If you come from a stock ROM, this is your opportunity to make a Backup of your phone(Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM (for me it got stuck after a restore during boot. But the backup was made with a different version of TWRP, so it might work in general) - simply do not expect too much of it at the moment.
If you haven't copied the installation files yet, you can now copy the GApps and CyanogenMod zip to your internal sd or external sd (be careful not to put the files into the data directory of the internal sd card as this will be deleted in the next step). Be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files. If MTP does not work from recovery, try it directly from Android or remove the external sd card from the phone and put it into your PC.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe). Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the CM 13.0 ROM zip-package
Install the GApps zip-package
How to root:
No SuperSu is needed as CyanogenMod already comes with integrated root support. Root access is disabled by default.
You normally do not need root access. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest ROM for the G800F you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
25/03/2016:
* USB OTG disabled by default for improved waterproofness (can be re-actived via Advanced Settings App)
* how to enable USB OTG:
* start the "Advanced Settings" App
* open the "USB-OTG Mode" setting
* select "Powered (Not waterproof)"
* add support for call recording
* how to record a call:
* start/Receive a call with the CM Dialer App
* During call open settings (icon: three vertical dots)
* Select "record call"
* (if you get an error message that recording failed, try to enable developer settings and enable root access for apps+adb)
* how to playback recorded call:
* open the call history in the Dialer app (icon: clock symbol)
* open details of recorded call
* in the detailed calling list, click on the play button for the recorded call
* removing fingerprints works now
* updated some stock libs with LP versions
* support for F2FS (needs new TWRP recovery)
* updated TWRP recovery (with F2FS support)
* synch with latest CM sources
22/02/2016:
* Fixed lock-screen freeze
* Fixed Infrared support
* Fixed search for mobile networks (search will take ~1min until results are shown)
* Updated some libs with LP versions
* Initial support for a fingerprint scanner
* Sync with CM sources
16/02/2016:
* Fixed camera problems with WhatsApp
* Fixed preferred radio family settings (LTE/GSM/...)
* Added default long-press actions for home and app-switch buttons (DJSteve)
* Switched to LP kernel (G800FXXU1BOL4)
* libsensors: replaced with open source implementation (fixes light sensor which is needed for auto-brightness)
* Preliminary (and very inaccurate) support for heart-rate sensor
* Update to TWRP 3.0 (TWRP 2.x will still work)
* Sync with CM sources
30/01/2016:
* Fixed BT calling problems (only noise)
* CM Camera replaced with CM Snap Camera
* better image quality (check picture quality settings), resulting in image file sizes of > 1MB instead of 200KB
* Saving images to SD card supported (check settings)
* Improved RIL support
* Use stock soft-key layout (left capacitive button is app-switch instead of menu now)
* Key-layout can be configured via button settings.
* Fixed adb root problem (root permissions were lost after reboot)
* SamsungServiceMode app works now
* Sync with CM sources
14/01/2016:
* Add soft keys option under settings > buttons
* Fix crash after hanging up call
* Sync with newest CM sources
31/12/2015:
* Receiving calls works now
* psyafter: SD-Card can be used as internal storage (new Android M feature).
Can be used to store photos on SD-Card.
IMPORTANT: the SD-Card will be formatted if you activate this feature.
* GPS works now
* Sensors work now (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter).
Light and Pulse sensors do not work yet.
* Youtube/Screencast crash fixed
26/12/2015:
* Wifi and Mobile Data work
20/12/2015 Hennymcc :
* Audio Fix
- Audio is now working (Still a bit quiet though)
- Making Calls is now working
14/12/2015 Hennymcc, CTXz :
* 6.0.1
- Updated to Android 6.0.1
- Fixed reboot when locking phone
- Fixed Internal Root in developer options not working
30/10/2015 CTXz :
* Added 'Buttons' settings
- Integrated Buttons/Capacitive Keys menu into settings
- Double tapping or holding button to open camera now works (In CM12 it didn't work)
- Power Menu is added under buttons menu
- Minor fixes
-!- NOTE : Setup Wizard may have some issues/crashes with this build. I will exclude it in the next one
29/10/2015 CTXz :
* Synced to newest sources
- Ugly looking Google search box removed
28/10/2015 CTXz :
* Changed from eng to userdebug
- No more red frames flashing
- Fixed Browser crashing
- Fixed crash after first boot
- More user friendly
- No additional boot.img flashing required
28/10/2015 hennymcc:
* First CM 13.0 test-build
This section is for developers:
A README file with build instructions can be found here:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
Sources:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
https://github.com/cm-3470/android_vendor_samsung_kminilte
https://github.com/cm-3470/android_kernel_samsung_kminilte
https://github.com/cm-3470/android_device_samsung_smdk3470-common
Developers welcome
At the moment the G800F/M/Y specific port of this ROM is only done by two persons (CTXz and hennymcc). Although Unjustified Dev also works on this ROM he does not own an Galaxy S5 Mini but a Galaxy Light which has a similar base but is different when it comes to camera, nfc and other components (maybe even slightly when it comes to audio and radio).
Help from other developers is always welcome. See the bug/feature section and this thread to see what is missing. Just give some short info (here in this thread or PM) that you want to work on some issue or feature so that work can be synchronized. Maybe there are also other devs that want to work with you on the same issue.
Knowledge in how the kernel works and good programming skills in C, C++ and Java would be nice but not necessary for all problems. At least you should be able to build the ROM and test your changes yourself but you do not need experience in porting ROMs.
Thanks to CTXz for his awesome work on getting Marshmallow to the G800F
Thanks to spookcity138 and ayke for providing new builds of this ROM.
Thanks to Psyafter for some patches and working on the G800F.
Thanks to Unjustified Dev from Team Regular for the initial work to get the G800F ready with CM.
XDA:DevDB Information
[G800F/M/Y][ROM][6.0][MHC19J] CyanogenMod 13.0 for G800F/M/Y [Beta 25/03/2016] [eol], ROM for the Samsung Galaxy S5 Mini
Contributors
hennymcc, CTXz, spookcity138, psyafter, Unjustified Dev, ayke
Source Code: https://github.com/cm-3470
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version >= 15/08/2015]
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-10-28
Last Updated 2017-01-26
If you already flashed stock LP, you will get the following message on boot:
KERNEL/RECOVERY IS NOT SEANDROID ENFORCING
If you wait for some seconds (or press some buttons) the message text turns blue:
KERNEL/RECOVERY IS NOT SEANDROID ENFORCING
and after some seconds (or buttons presses) CM will start.
Reserved
You (both of you) are making a great job !
Envoyé de mon SM-G800F en utilisant Tapatalk
$wap said:
You (both of you) are making a great job !
Envoyé de mon SM-G800F en utilisant Tapatalk
Click to expand...
Click to collapse
Ditto!
Sent from my SM-G800F using XDA Premium HD app
I don't see the point in cm13 when we didn't even get official Lollipop required to make cm12 better, "legit". Can someone enlighten me...?
Is it supposed to have the same bugs as cm12 or will there be more of them? Is Marshmallow statistically faster than Lollipop on other phones?
hennymcc said:
This is just a test build.
At the moment you have to flash the following boot.img with Odin after installing CM 13:
https://www.androidfilehost.com/?fid=24052804347848059
CM 13 may reboot after the initial configuration and may not be able to start again. I wiped the data partition and started again. This time it worked without a reboot (I also choose English as language and did not configure Wifi).
Click to expand...
Click to collapse
Updated the link with the boot.img build in
---------- Post added at 07:37 AM ---------- Previous post was at 07:33 AM ----------
n3n00 said:
I don't see the point in cm13 when we didn't even get official Lollipop required to make cm12 better, "legit". Can someone enlighten me...?
Is it supposed to have the same bugs as cm12 or will there be more of them? Is Marshmallow statistically faster than Lollipop on other phones?
Click to expand...
Click to collapse
CM13 is for people that enjoy its minor speed boost, smoother animations, cool new features and less Android related bugs over Lollipop. If you want a, well... almost bugless experience (Cough cough touchwiz) then use the stock rom.
CTXz said:
Updated the link with the boot.img build in
---------- Post added at 07:37 AM ---------- Previous post was at 07:33 AM ----------
CM13 is for people that enjoy its speed and less internal bugs. If you want a, well... almost bugless experience (Cough cough touchwiz) then use the stock rom.
Click to expand...
Click to collapse
Hi, so you think it will be easier to make a CM13 version with less bugs than the unfinished CM12 (Yes / No) ?
I enjoy to use a rom for every day not just having the last version to amaze my friends...
Depends. What I know for sure is that bugs related to Lollipop will be fixed. However we are hoping to get it as stable as cm12 if not more
Screehots
Screenshots with phone frame
Screenshots within Android
What‘s the current status of the mobile-data-connection in this build? Is it working?
In the first build of CM12.1 is was not working.
My experience was that this feature was always a problem in the beginning-time of every CM-build. Even with the official CM-builds.
WarStars said:
What‘s the current status of the mobile-data-connection in this build? Is it working?
In the first build of CM12.1 is was not working.
My experience was that this feature was always a problem in the beginning-time of every CM-build. Even with the official CM-builds.
Click to expand...
Click to collapse
We didn't build the correct RIL yet but it should be working in hopefully only few builds
New update
Download link has been updated
Changed from eng to userdebug
- No more red frames flashing
- Fixed Browser crashing
- Fixed crash after first boot
- More user friendly
- No additional boot.img flashing required
Also for anyone asking if there are really some differences in Marshmallow compared to Lollipop. Yes, the animations are allot smoother. There are some new native features. It has cleaned the mess of Lollipop's Android related bugs and is what Lollipop should have been from begin on. It is snappier than Lollipop and I can see/feel that. You may have realized that gingerbread-ish google toolbar. This is CM13 related since the official CyanogenMod 13 source is still in beta. However we no longer have the problem that the toolbar is laggy, instead it has a smooth animation when selecting it.
Could you please give some information when the RIL is done? Thank you in advance.
WarStars said:
Could you please give some information when the RIL is done? Thank you in advance.
Click to expand...
Click to collapse
It's on our priority list so hopefully soon
You know I have both the G800H and the G800F (the camera bug on the G800H prompted me to get the G800F), and now I don't know which one I should get rid of... I know, I know: "hard problem there KC... ya bloody wanker"
CTXz said:
It's on our priority list so hopefully soon
Click to expand...
Click to collapse
Awesome job so far, guys!
Sent from my SM-G800F using XDA Premium HD app
New update
Download link has been updated
Synced to the newest CM13 sources
- Ugly looking Google search box removed
CTXz said:
New update
Download link has been updated
Synced to the newest CM13 sources
- Ugly looking Google search box removed
Click to expand...
Click to collapse
Working features from page 1 still the same for this new build?
Sent from my SM-G800F using XDA Premium HD app
Mobile connections working now?
This is a LineageOS 13.0 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y) by CTXz and hennymcc.
DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE
Although G800F and G800H share the same name they are not related in terms of hardware due to the different SoCs used (Exynos vs. Snapdragon).
Hence please do not ask for support or ROMs for the G800H.
Working features
HW accelerated GUI
Camera (pictures+video: Back+Front)
Flash Light
Bluetooth (A2DP, HFP, HID)
IR
Sound
SMS
Initiate and receive calls
Wifi
Mobile Data
USB-OTG (Keyboard, Mouse, USB-Audio, Mass-Storage)
NFC
Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
Light sensor (needed for auto-brightness)
Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
SD-Card as internal storage (new Android M feature)
GPS
Multi-Window support (new experimental CM setting, can be enabled via developer settings)
Fingerprint scanner
Non-working features:
SELinux
Known issues:
Camera crashes when switching from camera to video. Use Google camera or Open camera to solve camera issues.
See the Bug Report section of this thread
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
Some users reported that their touch-screen stopped working permanently after some weeks of usage. For some user's (two at the moment including me) NFC stopped working permanently. Probably this issues are not related to this ROM as also many stock user's complain about hardware issues (random reboots, black screens, unresponsive touchscreen) but you have been warned.
Backup your data before flashing and check if the original firmware is present (e.g. at SamMobile)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Download:
Odin3-v3.07 (it is contained in CF-Auto-Root)
TWRP 3.0.0 recovery image [25/03/2016] (AndroidFileHost Mirror)
LineageOS 13.0 ROM for G800F/M/Y (Android File Host)
Later the newest LineageOS releases as well as the latest TWRP can be found here:
https://aykevl.nl/android
-Credit and thanks to @ayke
Google Apps (contains Google Play, ...) for Android 6.0, one of the following two is recommended:
Open GApps Project, Platform:ARM, Android:6.0, Variant: whatever you prefer (e.g. "mini" or "nano")
Install recovery:
Reboot your device into Odin mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select PDA and select the recovery image (recovery.tar.md5)
Check that only "Auto Reboot" and "F. Reset Time" is set
Click on "Start": the kernel image should be flashed now and the device should reboot afterwards. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, power of your device. If not restart into Download mode and flash again or flash the stock rom.
Before you flash:
You need the latest TWRP recovery (see above). Otherwise TWRP might not be able to flash the ROM. This is because TWRP checks now if the device is "supported".
Wipe the device to avoid problems with remaining files from the old installation (see instructions below). This also applies if you already installed an older version of CM 13.0.
Flash ROM:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
If you come from a stock ROM, this is your opportunity to make a Backup of your phone(Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM (for me it got stuck after a restore during boot. But the backup was made with a different version of TWRP, so it might work in general) - simply do not expect too much of it at the moment.
If you haven't copied the installation files yet, you can now copy the GApps and ROM zip to your internal sd or external sd (be careful not to put the files into the data directory of the internal sd card as this will be deleted in the next step). Be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files. If MTP does not work from recovery, try it directly from Android or remove the external sd card from the phone and put it into your PC.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe). Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the CM 13.0 ROM zip-package
Install the GApps zip-package
How to root:
LineageOS does not have root support integrated by default. You have to download addonsu-arm-signed.zip for 13.0 from the Lineageos Extras download page and install it with TWRP.
After that root access is still disabled by default. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest ROM for the G800F you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
28/01/2017:
* SMS error message fixed
26/01/2017:
* conversion to LineageOS
* updated some libs with stock MM versions
* fixed robotic voice problem
25/03/2016:
* USB OTG disabled by default for improved waterproofness (can be re-actived via Advanced Settings App)
* how to enable USB OTG:
* start the "Advanced Settings" App
* open the "USB-OTG Mode" setting
* select "Powered (Not waterproof)"
* add support for call recording
* how to record a call:
* start/Receive a call with the CM Dialer App
* During call open settings (icon: three vertical dots)
* Select "record call"
* (if you get an error message that recording failed, try to enable developer settings and enable root access for apps+adb)
* how to playback recorded call:
* open the call history in the Dialer app (icon: clock symbol)
* open details of recorded call
* in the detailed calling list, click on the play button for the recorded call
* removing fingerprints works now
* updated some stock libs with LP versions
* support for F2FS (needs new TWRP recovery)
* updated TWRP recovery (with F2FS support)
* synch with latest CM sources
22/02/2016:
* Fixed lock-screen freeze
* Fixed Infrared support
* Fixed search for mobile networks (search will take ~1min until results are shown)
* Updated some libs with LP versions
* Initial support for a fingerprint scanner
* Sync with CM sources
16/02/2016:
* Fixed camera problems with WhatsApp
* Fixed preferred radio family settings (LTE/GSM/...)
* Added default long-press actions for home and app-switch buttons (DJSteve)
* Switched to LP kernel (G800FXXU1BOL4)
* libsensors: replaced with open source implementation (fixes light sensor which is needed for auto-brightness)
* Preliminary (and very inaccurate) support for heart-rate sensor
* Update to TWRP 3.0 (TWRP 2.x will still work)
* Sync with CM sources
30/01/2016:
* Fixed BT calling problems (only noise)
* CM Camera replaced with CM Snap Camera
* better image quality (check picture quality settings), resulting in image file sizes of > 1MB instead of 200KB
* Saving images to SD card supported (check settings)
* Improved RIL support
* Use stock soft-key layout (left capacitive button is app-switch instead of menu now)
* Key-layout can be configured via button settings.
* Fixed adb root problem (root permissions were lost after reboot)
* SamsungServiceMode app works now
* Sync with CM sources
14/01/2016:
* Add soft keys option under settings > buttons
* Fix crash after hanging up call
* Sync with newest CM sources
31/12/2015:
* Receiving calls works now
* psyafter: SD-Card can be used as internal storage (new Android M feature).
Can be used to store photos on SD-Card.
IMPORTANT: the SD-Card will be formatted if you activate this feature.
* GPS works now
* Sensors work now (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter).
Light and Pulse sensors do not work yet.
* Youtube/Screencast crash fixed
26/12/2015:
* Wifi and Mobile Data work
20/12/2015 Hennymcc :
* Audio Fix
- Audio is now working (Still a bit quiet though)
- Making Calls is now working
14/12/2015 Hennymcc, CTXz :
* 6.0.1
- Updated to Android 6.0.1
- Fixed reboot when locking phone
- Fixed Internal Root in developer options not working
30/10/2015 CTXz :
* Added 'Buttons' settings
- Integrated Buttons/Capacitive Keys menu into settings
- Double tapping or holding button to open camera now works (In CM12 it didn't work)
- Power Menu is added under buttons menu
- Minor fixes
-!- NOTE : Setup Wizard may have some issues/crashes with this build. I will exclude it in the next one
29/10/2015 CTXz :
* Synced to newest sources
- Ugly looking Google search box removed
28/10/2015 CTXz :
* Changed from eng to userdebug
- No more red frames flashing
- Fixed Browser crashing
- Fixed crash after first boot
- More user friendly
- No additional boot.img flashing required
28/10/2015 hennymcc:
* First CM 13.0 test-build
This section is for developers:
A README file with build instructions can be found here:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
Sources:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
https://github.com/cm-3470/android_vendor_samsung_kminilte
https://github.com/cm-3470/android_kernel_samsung_kminilte
https://github.com/cm-3470/android_device_samsung_smdk3470-common
Developers welcome
At the moment the G800F/M/Y specific port of this ROM is only done by two persons (CTXz and hennymcc). Although Unjustified Dev also works on this ROM he does not own an Galaxy S5 Mini but a Galaxy Light which has a similar base but is different when it comes to camera, nfc and other components (maybe even slightly when it comes to audio and radio).
Help from other developers is always welcome. See the bug/feature section and this thread to see what is missing. Just give some short info (here in this thread or PM) that you want to work on some issue or feature so that work can be synchronized. Maybe there are also other devs that want to work with you on the same issue.
Knowledge in how the kernel works and good programming skills in C, C++ and Java would be nice but not necessary for all problems. At least you should be able to build the ROM and test your changes yourself but you do not need experience in porting ROMs.
Thanks to CTXz for his awesome work on getting Marshmallow to the G800F
Thanks to spookcity138 and ayke for providing new builds of this ROM.
Thanks to Psyafter for some patches and working on the G800F.
Thanks to Unjustified Dev from Team Regular for the initial work to get the G800F ready with CM.
XDA:DevDB Information
[G800F/M/Y][ROM][6.0][MOB31K] LineageOS 13.0 for G800F/M/Y [Beta 28/01/2017], ROM for the Samsung Galaxy S5 Mini
Contributors
hennymcc, CTXz, spookcity138, psyafter, Unjustified Dev, ayke
Source Code: https://github.com/cm-3470
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version >= 15/08/2015]
Based On: LineageOS
Version Information
Status: Beta
Created 2017-01-26
Last Updated 2017-04-23
Does internal root work? I read that in lineageOS you can't enable root through settings, but instead do the normal rooting process...
Enviado desde mi SM-G800F mediante Tapatalk
nico_vo said:
Does internal root work? I read that in lineageOS you can't enable root through settings, but instead do the normal rooting process...
Enviado desde mi SM-G800F mediante Tapatalk
Click to expand...
Click to collapse
Like henny said in his post, root is indeed not available by default. However, you can flash SuperSU yourself. I believe this is the file you're looking for.
Thanks so much !!
And by the way, why is that "Kernel is not SEAndroid enforcing" message gone ?!
Friedensfurz said:
Thanks so much !!
And by the way, why is that "Kernel is not SEAndroid enforcing" message gone ?!
Click to expand...
Click to collapse
Probably because the kernel is not SEAndroid enforcing anymore.
But for real though: I think it has to do with the fact that SU isn't enabled by default anymore
Friedensfurz said:
Thanks so much !!
And by the way, why is that "Kernel is not SEAndroid enforcing" message gone ?!
Click to expand...
Click to collapse
Don't know how this is related to that but I got this device with stock LP and hennymcc wrote in the first post of the CM13 ROM:
If you already flashed stock LP, you will get the following message on boot:
KERNEL/RECOVERY IS NOT SEANDROID ENFORCING
so I flashed stock KK to avoid this message...after I saw what it ment. Coming from stock KK to a custom ROM does not give you that message.
But that does not explain why the message is gone now. Maybe StanleyNL is right that it has to do with the fact that SU isn't enabled by default anymore.
StanleyNL said:
Like henny said in his post, root is indeed not available by default. However, you can flash SuperSU yourself. I believe this is the file you're looking for.
Click to expand...
Click to collapse
I thinkt the developer can turn on root by default?
friscoboi said:
I thinkt the developer can turn on root by default?
Click to expand...
Click to collapse
Yes that is true, the LineageOS website said: "Home builders that want to bake su back into the ROM can use the command ‘export WITH_SU=true’ prior to building."
Only I did not work manager download via the mobile Internet? I can not download anything. (Google Translate)
StanleyNL said:
Probably because the kernel is not SEAndroid enforcing anymore.
But for real though: I think it has to do with the fact that SU isn't enabled by default anymore
Click to expand...
Click to collapse
No, it is not related to SU. The SEAndroid enforcing message can just be disabled.
I think SU was disabled in LineageOS as more and more apps check for the su-binary and do not start if it is present.
That's why I did not enable it so far.
To flash with full wipe. Do not download anything from the mobile internet if the application uses a standard application Downloads. With the play Market downloads are no problems. Where to dig? (Google translation)
hennymcc said:
I think SU was disabled in LineageOS as more and more apps check for the su-binary and do not start if it is present.
That's why I did not enable it so far.
Click to expand...
Click to collapse
Oh that makes sense to me. I think you should leave it that way, since not everybody wants to have a rooted device, they just want LineageOS in order to give their phones a new life. However, it's up to you to decide if root should(n't) be enabled, of course!
Oleggluk said:
To flash with full wipe. Do not download anything from the mobile internet if the application uses a standard application Downloads. With the play Market downloads are no problems. Where to dig? (Google translation)
Click to expand...
Click to collapse
Can you explain a little bit better please, I dount understand you
Gesendet von meinem SM-G800F mit Tapatalk
Sunn76 said:
Can you explain a little bit better please, I dount understand you
Gesendet von meinem SM-G800F mit Tapatalk
Click to expand...
Click to collapse
Try to download any file through a standard browser using the mobile Internet. Write result. (Google Translate)
Oleggluk said:
Try to download any file through a standard browser using the mobile Internet. Write result. (Google Translate)
Click to expand...
Click to collapse
Just tried this. Works for me.
Sent from my SM-G800F using Tapatalk
spookcity138 said:
Just tried this. Works for me.
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
Strange. I found one more person in Russia who have the same problem as me. (Google Translate)
Oleggluk said:
Strange. I found one more person in Russia who have the same problem as me. (Google Translate)
Click to expand...
Click to collapse
Working fine here in Germany
Gesendet von meinem SM-G800F mit Tapatalk
Oleggluk said:
Strange. I found one more person in Russia who have the same problem as me. (Google Translate)
Click to expand...
Click to collapse
I'm also from Russia and everything works fine.
@hennymcc
Have you planned to release an lineage-migration build to update from cyanogenmod?
bacardischmal said:
@hennymcc
Have you planned to release an lineage-migration build to update from cyanogenmod?
Click to expand...
Click to collapse
There are no plans for a migration build. It is enough work to get 7.1 working.
Unofficial builds of LineageOS 14.1 (Android 7.1.2) for the LeEco 1s
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you
*
## Working
* Adjustable brightness
* Audio
* Auto brightness
* MTP and Mass Storage modes
* Vibration
* Rotation
* RIL
* Video
* Gallery
* Fingerprint
* Mic
* Wi-Fi
* Bluetooth
* Internet
* GPS
* Audio over BT
* IR
* Hotspot
* Camera rear/front (Photographs)
* Camera rear/front (Video)
## Broken/Bugs
* Youtube 60 fps videos
How to install
Minimum requirement is eui 5.8.017S+ (MM)
-Reboot recovery (TWRP 3.0.3)
-Wipe dalvik cache, system,data,cache
-Install LOS 14.1 zip
-Reboot
NOTE:
1. For HQ Videos better use external app like Mx player (SW decoder)
2. If camera crashes, simply restart device
3. READ FAQ BEFORE ASK !!
14.03.2017
Fixed GPS
Finally fixed Fingerprint
Added YGPS app for gps test
Added Google play
Audio over BT
And more...
20.03.2017
Added Google play, Gestures, Kernel Adiutor
Camera fixed but no video recording..
Switching to record crashes camera !!!
Media profiles updated
Keylayout updated
Removed unecessary files
Probably smaller amount of crashes
TEST: Enable by default Thundercharge. You can disable this if charging will be worse than current ~2h. Kernel Adiutor==>Baterry==>Charge Rate.
Many other things..
29.03.2017
Added Live Display
Added ability to change color of led notifications (Notification=>Settings icon)
Fixed Video recording
Removed unecessary files
Rebuild bugged kernel
Now no crashes and restarts
No battery draining in idle
Renamed LoopMobile to Reliance Jio (Thanks to SscSPs)
Other things..
15.04.2017
Base version updated from 7.1.1 to 7.1.2
Added MTK Engineer Mode
Added lib for compass support
Root is disabled by default
LiveDisplay is disabled by default
Fixed taking pictures with flash but still camera is sometimes crashing..
Fixed microphone on loudspeaker mode
Kernel: updated to 3.10.104. Added F2FS support, extra governors and many other things.
Many other small things i can't remember..
- DOWNLOADS
Thanks to:
DeckerSU
Bule
M.A.D
Danielhk
Donators
Julio from Brasil
I do this on my free time, however i do have costs of maintaining this..
Any donation is highly appreciated
You can donate by using button in signature.
General F.A.Q.
Q: Which recovery should I use for this ROM?
A: Latest. 3.0.3 or 3.1
Q: What's working ?
A: Check first Post for current status
Q: Do i really need full wipes?
A: Yes
Q: App "x" doesn't work, why?
A: Probably not compatible with Nougat yet, feedback is welcome
Q: Is the rom rooted?
A: No. You can flash SuperSu, Magisk or SuperUser. Your choice.
Q: Does xposed work?
A: As of now, there's no Xposed for N, so no
Q: Does busybox still works on Nougat?
A: Yes
Q: Data Connection does not work, why?
A: The ROM, already includes latest APNs, if you still have no active data connection, check your APN settings
Q: Does this ROM supports Substratum ?
A: YES, latest rootless substratum is supported on RR
Q: When will (feature/issue here) be fixed?
A: NO ETA , please
Q: Does Volte work?
A: No. There is no any mediatek device with working Volte on custom rom. And Volte is not supported by my mobile operator..
Q: Is quick charge working?
A: Charging speed is about 1:00 to 1:30h
Thundercharge is enabled by default. You can disable this if charging will be worse than current ~1,5h. Kernel Adiutor==>Baterry==>Charge Rate.
XDA:DevDB Information
[ROM][7.1.2.][STABLE][UNOFFICIAL]LineageOS 14.1 for LeEco 1s, ROM for the LeEco Le 1S
Contributors
wisniapl
Source Code: https://github.com/WisniaPL/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2017-04-15
Created 2017-03-20
Last Updated 2017-04-15
So bad that there no fast charge! I was waiting for this release... Anyway, thanks for the job.
Hello. When i finish flash this rom from twrp 3.1.0.0 im stuck at leeco boot screen. I have tried to wipe cache/dalwik and make factory reset but seems not to work. Any clue what i do wrong?
Ankan53 said:
Hello. When i finish flash this rom from twrp 3.1.0.0 im stuck at leeco boot screen. I have tried to wipe cache/dalwik and make factory reset but seems not to work. Any clue what i do wrong?
Click to expand...
Click to collapse
did you flash the boot image.
Hello would this rom have the usb otg-ethernet connectivity option which pure stock has? Thank you.
hope to see this rom goes official one day
Babakkardan said:
Hello would this rom have the usb otg-ethernet connectivity option which pure stock has? Thank you.
Click to expand...
Click to collapse
Sorry, i don't know..
Any work around for menu key as we cant change
Its function and snapchat not logging in says "problem connecting with server"
tejus said:
Any work around for menu key as we cant change
Its function and snapchat not logging in says "problem connecting with server"
Click to expand...
Click to collapse
for menu key try this >> https://www.androidfilehost.com/?fid=817550096634756270
Good job with all the work you and the others have done.
Just to report a bug(?)
When using loudspeaker during calls...microphone stays muted no matter what.
BJ.OnE said:
for menu key try this >> https://www.androidfilehost.com/?fid=817550096634756270
Click to expand...
Click to collapse
How do I install this fix!
Steps please
Thanks
V_Patil said:
How do I install this fix!
Steps please
Thanks
Click to expand...
Click to collapse
Flash LOS 14.1 then flash the fix, if you're already on LOS 14.1, just flash the fix alone.
BJ.OnE said:
Flash LOS 14.1 then flash the fix, if you're already on LOS 14.1, just flash the fix alone.
Click to expand...
Click to collapse
Thanks a lot......
Waiting for the official ROM......
---------- Post added at 04:34 PM ---------- Previous post was at 04:04 PM ----------
Can we get on-screen navigation keys?
Will this los 14.1 work on x509
wisniapl said:
Sorry, i don't know..
Click to expand...
Click to collapse
How do I get on screen navigation buttons??
PULKIT SINGH said:
Will this los 14.1 work on x509
Click to expand...
Click to collapse
Yes BOSS
V_Patil said:
How do I get on screen navigation buttons??
Click to expand...
Click to collapse
To get navigation bar,open some root explorer.
Go to /system.
Then open build.prop with some text editor.
Now add the folling line at last::
qemu.hw.mainkeys=0
Save it. Give r-w-rr permission and reboot.
You will have navigation bar.
deepjyoti30 said:
To get navigation bar,open some root explorer.
Go to /system.
Then open build.prop with some text editor.
Now add the folling line at last::
qemu.hw.mainkeys=0
Save it. Give r-w-rr permission and reboot.
You will have navigation bar.
Click to expand...
Click to collapse
Do I have to root the phone ?
V_Patil said:
Do I have to root the phone ?
Click to expand...
Click to collapse
Yes. You need root access but lineage has pre built root.
Thanks for updates
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Display > lockscreen > advanced settings (this wont to do anything)
- Instagram video recording (You will sound like a robot)
- Wi-Fi display reboots the phone
- Green pictures when using the stock camera/ Whatsapp in lowlight (this is related to YUV processing). Use provided gcam instead.
- Report unknown bugs with logs please!
Instructions :
Clean flash:
- Flash latest Pie ROM by Xiaomi (10.0.13.0). You may use option to retain userdata.
- Use fastboot to boot to latest TWRP.
- Falsh the TWRP installer zip and Force-encryption-disabler zip
- Reboot to TWRP
- Flash the ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Dirty flash (upgrade from existing AOSiP 9 install):
- Reboot to TWRP
- Factory reset in TWRP. No need to wipe userdata! (Skip if you are on ten already)
- Flash ROM zip
- Flash TWRP installer
- Got to Reboot --> Change boot slot (if on A: A --> B or if on B: B --> A)
- Reboot to recovery
- (Optional, but recommended) Flash GAPPS linked below (other GAPPS for Android 10 may work too)
- (Optional) Flash Magisk (>v20.1!!!!)
- Reboot and wait, will take longer than normal reboot!
Note: It is strongly advised to make a backup before upgrading!
Downloads :
Download from Sourceforge
Open GApps Note: OpenGAPPS for ten now officially out, so link changed. Nano package is still recommended!
Recommended Gcam
Kernel Source
Device Tree
Vendor Tree
Props to all the guys from daisy-development-q and especially Lyceris-chan!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
Lyceris-chan
Tunasahinn
acras01
pawelik001
Offain/33bca
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
gumka77 said:
Thank you! Respect mate
Edit:
PS. With gapps you reccomend. Can i use Bit... or Open.. ?
Click to expand...
Click to collapse
I used the OpenGAPPS from test folder I linked in the OP. Bit... might work, but no guarantee. Just try them and report back, so maybe other users can learn from your experiences.
Note: Updated my main phone from AOSiP Pie to Ten and had some wierd issues. Factory resetted in TWRP and now everything working. So making a backup and factory reset before updating is recommended
When viperos q?
Thanks you , I see your sources is stable thanks for upgrade aosip
opal06 said:
Android Open Source illusion Project
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
"AOSiP stands for Android Open Source illusion Project. We are an AOSP based custom ROM, twisted with the latest features from all over the Android development community. Quality and stability is our first priority as we are dedicated to bringing you the best Android has to offer.
AOSiP brings you the most wanted features, while keeping speed and stability our top priority.
AOSiP features multiple customization options, so your phone can look the way you want it."
Known issues:
- AOSiP ten is not officially released yet. There are missing features!
- Device side should be fine, but please report all bugs here with logs!
Instructions :
Follow guide by davidrocher: https://github.com/tkchn/daisyinstall
This works for Android 10 too! Please use correct version of OpenGAPPS.
Note: It is strongly advised to make a backup before upgrading and performing a factory reset in TWRP.
Downloads :
Download from Sourceforge
Open GApps
Kernel Source
Device Tree
Props to all the guys from daisy-development-q and especially acras1!
Have fun!
XDA:DevDB Information
[10.0][STABLE] AOSiP Quiche beta, ROM for the Xiaomi Mi A2 Lite
Contributors
opal06
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2019-11-27
Last Updated 2019-11-27
Click to expand...
Click to collapse
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
See if this works for you:
View attachment Clock_v1.0.0.zip
Thanks for the rom, what base is needed?, is November security patch?
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
opal06, kudos for signature spoofing built-in, I can use microG.
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Thank you all very much for your positive feedback.
schmidt_here said:
i can't believe wifi, call, bluetooth audio, cam, fingerprint, navigation, google, youtube, spotify, usb connection to pc works
Only two things i've discovered, there is no clock app (i installed Gapps pico maybe that the problem) and AOSiP Updater seems not working.
Can someone give me a clock/ alarm app - opensource ? (App of Tibor Kaputa doesn't work)
Click to expand...
Click to collapse
As for the missing clock, I did not notice it during testing, but you are obviously right. For a stock feeling you can download the Clock app by Google, but there are many other good alternatives.
AOSiP updater is not working because I did not update the OTA file. AOSiP ten is still beta from ROM source side, so I won't enable OTA until it's official from their side.
Txatxiquesi said:
Thanks for the rom, what base is needed?, is November security patch?
Click to expand...
Click to collapse
As base any pie base should work, but latest is best.
schmidt_here said:
yes, november
i don't remember wich version it was, i think 10.0.9. Try 10.0.13 and then post if it works
ps: i installed omniclock from playstore - it works
Fingeprint swipe doesn't work
Click to expand...
Click to collapse
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
gumka77 said:
Can i update kernel to Celexas kernel v.2. (from devotag) ?
Click to expand...
Click to collapse
Probably, just try and report. If something goes wrong, go to TWRP and flash ROM again without wiping data. You won't loose any settings or data.
Plis build with nitrogen kernel
test
opal06 said:
Have you enabled fingerprint swipe in Settings --> System --> Gestures? For me it works fine
Click to expand...
Click to collapse
Yes, it's enabled. It doesn't disturb me, maybe i've to make a fresh install and take another version base.
Yesterday i had an issue, i couldn't download from play store until i deactivated and reactivated the app. Also i couldn't install apk's downloaded manualy from website.
Maybe it's a unique incident
schmidt_here said:
Also i couldn't install apk's downloaded manualy from website.
Click to expand...
Click to collapse
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
celrau said:
I had a similar issue trying to install apps with Amaze file manager. I had no problem installing apps with the built-in file manager and also with F file manager from f-droid, in my case it was obviously an incompatibility of Amaze with 10. I'm on 10.0.9 base btw. Also I was able to delete system apps with Amaze and magisk 19.3 but not with 20.1. And I can't uninstall Whatsapp no matter what, the installer just quits so I must do it with adb uninstall.
Click to expand...
Click to collapse
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
lacia-chan said:
That's normal behavior for magisk 20.1 because the system mount point had been changed from /system to / so most root using apps don't know how to use it. Besides that you can use the system debloater magisk module and that should work just fine.
Click to expand...
Click to collapse
I just did some reading on this, you are right
Flashing Nitrogen R2 kernel results in bootloop with this rom. R1 works fine. Any fix?
good job
I'm using your rom for 1-2 days now Looks like every features work really well to me. I'l report back later if I see anything. Thanks OP