{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The kernel source for this ROM can be found here
PLEASE READ:
These are very early builds and at this current time there are very few features. All features from KitKat builds will need to be reworked for Lollipop. Alpha builds should be considered as test builds, so flash at your own risk.
FLASHING INSTRUCTIONS:
1. POWER OFF THE PHONE
2. HOLD VOL+ AND PLUG USB TO BOOT INTO FASTBOOT (BLUE LED)
3. *TEMPORARY* fastboot flash boot boot.img from any CM11/PA 4.4 build (due to broken recovery)
4. fastboot reboot
5. ENTER RECOVERY (on boot led will be violet for 3'', during this period press vol+) AND PERFORM A FULL BACKUP
6. FACTORY RESET
7. WIPE CACHE & DALVIK CACHE
8. INSTALL ROM, GAPPS AND SUPERSU
9. REBOOT
PA 5+ UPDATES DO NOT NEED A FACTORY RESET,
JUST WIPE CACHE AND DALVIK CACHE.
SUBMITTING BUG REPORTS:Please use the Bug Reports tab. Users must also submit a log of the issue. Without them, fixing bugs is impossible. Thank you.
CREDITS:
AOSP/Google
Cyanogenmod
@Alx31TLse
@pabx
@Olivier
@Tommy-Geenexus
Clicking the Thanks button takes no time and is always appreciated!
XDA:DevDB Information
Paranoid Android 5+, ROM for the Sony Xperia ZL
Contributors
SuperHanss
Source Code: https://github.com/AOSPA-legacy
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader
Based On: AOSPA, CyanogenMod
Version Information
Status: Testing
Created 2015-01-03
Last Updated 2015-01-03
KNOWN BUGS:
* CM's recovery is currently broken, so for now, flash a boot.img from any CM11/PA 4.4 build if you need to flash anything. REMEMBER TO FLASH THE PA 5.0 BOOT.IMG AFTERWARDS!
* Other bugs? Let me know.
I'll take that.
Thanks! However, even though TWRP is working, I'm getting the old and much hated "This package is for device: odin; this device is yuga" error. What should I do in this case? Flash PA4's kernel again?
Edit: I did just that xD
Luchoc said:
Thanks! However, even though TWRP is working, I'm getting the old and much hated "This package is for device: odin; this device is yuga" error. What should I do in this case? Flash PA4's kernel again?
Edit: I did just that xD
Click to expand...
Click to collapse
Oops my bad, someone in the other thread said it was working. I'll upload a fixed boot.img soon.
when i want to flash the rom,twrp gave me weird error,need to reflash the old rom back
Thanks, The charging is really slow for my Xperia ZL. Do you recommend any kernel changes for this?
Guys, please try this boot.img. TWRP should be working:
https://www.androidfilehost.com/?fid=95886621747970098
SuperHanss said:
Guys, please try this boot.img. TWRP should be working:
https://www.androidfilehost.com/?fid=95886621747970098
Click to expand...
Click to collapse
How can I try it without re-flashing the RO-oh WTH I'll flash it again and edit this post ASAP.
Edit: It works! BTW I've been using this build since noon and battery life seems to have improved a bit. At least it doesn't get hot as hell when the display is on anymore. The camera (or the touchscreen, dunno exactly) did hung up on me once though, but now it's mostly a daily driver. Thanks again!
Thanks for this wonderful ROM. Is there any custom Kernel which works for this PA-5 ROM. I cannot see fast charge been enabled with this ROM and battery is not as good as well. So, want to try my luck with custom kernel. But there is none I can see for PA-5.
Hello,
i installed it too, and it works great. But i have a few Questions. Where can i change Lock Screen Settings? I must swipe up, to get the pattern Unlock. Second, i installed 2 Month again TWRP from here Klick Klack, and after flashing Kernel, it is still there. How can i get your TWRP? Third, a little Thing i found, that in the advanced Boot Menu, there is no translation. Fourth, is it possible to Set Custom Widgets on Lock Screen? And at last, thanks for your great work!!
SuperHanss said:
Oops my bad, someone in the other thread said it was working. I'll upload a fixed boot.img soon.
Click to expand...
Click to collapse
But dude that boot.img u had posted is working fine in the other thread...
shivindera said:
But dude that boot.img u had posted is working fine in the other thread...
Click to expand...
Click to collapse
It works fine for flashing non device specific things, but when it comes to flashing those things (such as ROMs) it throws something similar to Status 7 error since it was originally intended for yuga, not odin. Something similar happened to XZDualRecovery a while back.
Is there any GPS icon bug in this ROM. I cannot see the icon going away from notification bar even I turn off GPS.
Oh, you're right. I believe there is. I turned location on and opened maps and I could get a lock withouth the location icon on the status bar.
anshumangoyal said:
Is there any GPS icon bug in this ROM. I cannot see the icon going away from notification bar even I turn off GPS.
Click to expand...
Click to collapse
Fixed in next release.
SuperHanss said:
Fixed in next release.
Click to expand...
Click to collapse
Oh! Have you uploaded the next release as well. I can see the 1-Jan-15 release been uploaded on 3rf Jan 2015. Request you to please update.
After a Day of use, the Auto brightness didn't work correct. It is mostly to dark, and the response time is to slow. Wifi disconnect randomly from Router if it is in use. Sorry fpr the bad English!!
So far the rom is working really fast, only two problems so far
1 - my microphone doesn't seem to work on calls, i will try to see if it works on skype or facebook but on phone calls no one can hear me
2 - sometimes when adjusting brightness while listening to some music or video result in a screen flickering
troydiablo said:
So far the rom is working really fast, only two problems so far
1 - my microphone doesn't seem to work on calls, i will try to see if it works on skype or facebook but on phone calls no one can hear me
2 - sometimes when adjusting brightness while listening to some music or video result in a screen flickering
Click to expand...
Click to collapse
Had the same problem with the mic with validus but since the last release jan. 6 from Alx its gone.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys, This is my port of the awesome Euphoria-OS.
I stopped supporting this rom
but as of 13th sept 2015, I am back
DOWNLOADS
You can click here DOWNLOADS for the ROM
GApps here (5.1 only)
THIS ROM SUPPORTS LVM, COLDBIRD Unification and Stock.
Installation Instructions
- Make sure you're running Nameless TWRP Recovery
- Make sure you updated your modem (Flash latest CM nightly)
- Make sure you updated your TrustZone firmware (Install latest CM nightly for it)
-No need to flash any modem or any CM nightly. Modem is now included in the ROM
- Copy GApps and ROM to your internal/external SDCard
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET
- Flash Euphoria-OS zip
- Flash GApps zip
-Flash Supersu
- Reboot and profit!
LVM UNIFIED
To set up LVM, download this zip and flash it via recovery
To remove LVM, download and flash this zip
COLDBIRD UNIFIED
We are offering unified versions, using Coldbird's unification method. Please have a look at
this thread (http://www.oppoforums.com/threads/tutorial-unified-storage-layout-for-oppo-find-7a.17952)
CREDITSEuphoria-OS Team
CyanogenMod
Euphoria-OS Team
XDA:DevDB Information
[5.1] Euphoria-OS, ROM for the Oppo Find 7a
Contributors
suraj.das
Source Code: https://github.com/Euphoria-OS-Legacy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest CM12 Firmware/Modem
Based On: CyanogenMod
Just in case..
Nice, I was planning on making it, but you were faster.
Definately going to give it a try.
your device trees sure helped a lot
Wow yet another port , freking great
Dl ......
Thx a lot
What kind of storage does that rom use ?
Vanilla ?
Unified ?
LVM ?
None of the above ?
thx a lot for bringing more choice to our Find7
theradec said:
What kind of storage does that rom use ?
Vanilla ?
Unified ?
LVM ?
None of the above ?
thx a lot for bringing more choice to our Find7
Click to expand...
Click to collapse
stock partition only..
but it might change in the future..
What a beast you are
New build is up guys! Use the first "download" link in OP to get it.. ill be uploading on the second link too, in a minute!!
Changes - Check Euphoria's gerrit.
Sync was done like 7 hours back!
Used a new toolchain. UBER TOOLCHAIN 4.8 for ROM and 4.9 for kernel!
Everything is frikking smoother and faster now.
SELinux is set to permissive. I like it that way.
I am still looking to implement LVM. Might take time. I am a NOOB
I've tried both beta's and they both run extremely smooth. Only problem I've had with both is when someone sends me a text I get unfortunately messenger has stopped on both beta's. I've tried clean installs on both coming from nameless then tried clean install coming from cyanogen 12. Tried cleaning data and cache from messenger app but nothing has worked. Everything else has worked but receiving texts. Correct APN was verified so I'm at a loss.
JRW 28 said:
I've tried both beta's and they both run extremely smooth. Only problem I've had with both is when someone sends me a text I get unfortunately messenger has stopped on both beta's. I've tried clean installs on both coming from nameless then tried clean install coming from cyanogen 12. Tried cleaning data and cache from messenger app but nothing has worked. Everything else has worked but receiving texts. Correct APN was verified so I'm at a loss.
Click to expand...
Click to collapse
I can say, I am experiencing the same. Using Google Messenger for the meantime.
Smooth builds.
carlsbad28 said:
I can say, I am experiencing the same. Using Google Messenger for the meantime.
Smooth builds.
Click to expand...
Click to collapse
I've seen where people were having same issues with cyanogen 12.1 as well so might be an underlying issue there. Wish they could get it resolved for what time I've played with this ROM I'd love to give it more time as a daily driver but I need to be able to receive texts. Other then this issue the work looks very good and promising.
WiFi is broken when flashing SuperSU for root.
ROM worked fine prior.
carlsbad28 said:
I can say, I am experiencing the same. Using Google Messenger for the meantime.
Smooth builds.
Click to expand...
Click to collapse
JRW 28 said:
I've tried both beta's and they both run extremely smooth. Only problem I've had with both is when someone sends me a text I get unfortunately messenger has stopped on both beta's. I've tried clean installs on both coming from nameless then tried clean install coming from cyanogen 12. Tried cleaning data and cache from messenger app but nothing has worked. Everything else has worked but receiving texts. Correct APN was verified so I'm at a loss.
Click to expand...
Click to collapse
sorry guys. I didnt get that error because I install Hangouts as soon as I boot a new rom.
I will try to see what the problem is.
Next build will come in a day or two. My exams are on so thats why.
Lets hope its fixed on the build. Btw I uploaded a new build on AFH. You could try that for the time being
carlsbad28 said:
WiFi is broken when flashing SuperSU for root.
ROM worked fine prior.
Click to expand...
Click to collapse
which version of supersu? No one else has reported this bug. Could be an issue on your end?
suraj.das said:
which version of supersu? No one else has reported this bug. Could be an issue on your end?
Click to expand...
Click to collapse
Same here, after deep sleep , wifi is gone and need reboot , then it's working again!
Super su 2.46
Thanx for a great build
(Just flashed beta 2.48, wifi speed is back at normal again, it was extremely slow and sluggish on 2.46?)
spoonymoon said:
Same here, after deep sleep , wifi is gone and need reboot , then it's working again!
Super su 2.46
Thanx for a great build
(Just flashed beta 2.48, wifi speed is back at normal again, it was extremely slow and sluggish on 2.46?)
Click to expand...
Click to collapse
Thanks, will try out 2.48
Everything actually works at first boot. ROM backups my apps through cloud. But after restarting, WiFi breaks and am unable to fix the issue until I do another clean install. Only happens on 5.1, can't replicate it on 5.0.2.
EDIT: Scratch that, I actually flashed 2.48 :banghead: Wonder what the issue is.
carlsbad28 said:
Thanks, will try out 2.48
Everything actually works at first boot. ROM backups my apps through cloud. But after restarting, WiFi breaks and am unable to fix the issue until I do another clean install. Only happens on 5.1, can't replicate it on 5.0.2.
EDIT: Scratch that, I actually flashed 2.48 :banghead: Wonder what the issue is.
Click to expand...
Click to collapse
is it working now?
Wifi works with 2.48, but no way rom will enter deep sleep!
Even changing sleep mode in kernel tweaker doesn't change anything!
spoonymoon said:
Wifi works with 2.48, but no way rom will enter deep sleep!
Even changing sleep mode in kernel tweaker doesn't change anything!
Click to expand...
Click to collapse
This deep sleep problem is really weird. Which gapps do you use?
I am using the gapps that I linked in the OP. and phone enters to deep sleep just fine
OFFICIAL VERSION HERE : http://forum.xda-developers.com/xperia-z1/orig-development/rom-crdroid-android-t3280304
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
DOWNLOADS
12/25/2015
Not Working
Camera
Test and report back
SOURCE CODE
Kernel
Device Tree
Rhine Board Tree
crDroid
CREDIT
davidteri91
erikcas
jerpelea
crDroid Dev team
FXP Dev team
etc
XDA:DevDB Information
crDroid, ROM for the Sony Xperia Z1
Contributors
zhuoyang
Source Code: https://github.com/crdroidandroid
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2015-12-20
Last Updated 2015-12-29
Recovery
NOTE: For build after 12/25 only (build before 12/25 untested)
CyanogenMod Recovery - Download
How to flash (using fastboot):
Code:
fastboot flash recovery recovery.img
How to boot into recovery :
Press power button once (don't hold) when LED lights up on the Sony screen.
Should google gapps? Does have root? Internal and external memory work?
Sorry for bad Englisch!
I install rom from TWRP and phone not turn on... In .zip in build prop I read: ro.build.description=C6903-user 5.0.2 14.5.A.0.270 3750474323 release-keys
This is not Android 6.
opengapps doesn't work , used those instead
http://www.devfiles.co/download/m4Er5IlQ/gapps-600-base-20151016-1-signed.zip
had to set permission on my own , but playstore keeps on fc
aleksandar9999a said:
I install rom from TWRP and phone not turn on... In .zip in build prop I read: ro.build.description=C6903-user 5.0.2 14.5.A.0.270 3750474323 release-keys
This is not Android 6.
Click to expand...
Click to collapse
Here's a prove
solved said:
opengapps doesn't work , used those instead
http://www.devfiles.co/download/m4Er5IlQ/gapps-600-base-20151016-1-signed.zip
had to set permission on my own , but playstore keeps on fc
Click to expand...
Click to collapse
Hmm strange ... I do use opengapps myself , it works perfectly
Did you wipe everything (including /system) before you flash to this ROM ?
aleksandar9999a said:
Should google gapps? Does have root? Internal and external memory work?
Sorry for bad Englisch!
Click to expand...
Click to collapse
Yes , you should install gapps, Root can be enabled in development settings.
Both Internal and external storage works !
Okay, this ROM is really good. Just a few things and it will be perfect:
- no built-in recovery (I know I should use new bootloader but I don't know if there's any way how can I "downgrade" it back if I want to)
- Mi Pistons headphones are still buggy - you have to press all buttons to get it recognized
- in YouTube app when you use you phone in landscape and minimize some video (browsing other videos when the previous one is still playing) you see some graphical artefacts in right upper corner. Above multitasking button.
- and of course camera but that's known bug
edit : there are more glitches - see screenshot in attachments
I try again to install rom and it is work. I don't know why first time not work. I install from philz recovery. I have some questions. If you port camera from other rom, it will work? Before I was install cm12.1 and view that on first and second boot camera was work, but after this it isn't work. This is similar problem. The problem may be in framework.jar.
SuperLamic said:
Okay, this ROM is really good. Just a few things and it will be perfect:
- no built-in recovery (I know I should use new bootloader but I don't know if there's any way how can I "downgrade" it back if I want to)
- Mi Pistons headphones are still buggy - you have to press all buttons to get it recognized
- in YouTube app when you use you phone in landscape and minimize some video (browsing other videos when the previous one is still playing) you see some graphical artefacts in right upper corner. Above multitasking button.
- and of course camera but that's known bug
edit : there are more glitches - see screenshot in attachments
Click to expand...
Click to collapse
There's actually boot to recovery implementation in kernel but it seems to be not working. Will have to investigate that later on.
The graphical glitches seems to be cyanogenmod bug (crDroid is based on cm).
aleksandar9999a said:
I try again to install rom and it is work. I don't know why first time not work. I install from philz recovery. I have some questions. If you port camera from other rom, it will work? Before I was install cm12.1 and view that on first and second boot camera was work, but after this it isn't work. This is similar problem. The problem may be in framework.jar.
Click to expand...
Click to collapse
Unfortunately the problem is not that simple.
Camera just doesn't work yet in marshmallow.
We'll have to wait for Sony to release camera for marshmallow or someone else to get it working.
I try to merge memory, but it not work. It is possible that I'm wrong thing.
New build released.
https://www.androidfilehost.com/?fid=24338798368260209
In this build , proximity sensor is fixed.
Complete changelog available at Settings > About Phone > About crDroid > Changelog
Pls dear developer if possible can twrp be implemented in the kernel please??
gauravbhakuni90 said:
Pls dear developer if possible can twrp be implemented in the kernel please??
Click to expand...
Click to collapse
Unfortunately this would take some time. I just can't figure out yet what's wrong with the boot to recovery implementation.
For now , your best bet is updating TA with recovery mode and flash TWRP
or you can hotboot any kernel with recovery using "fastboot boot boot.img"
When phone is turn off and you plug charger, screen is light and then charger screen will restart and screen remaints lit. After 2 or 3 restarts the charger screen, phone will turn on and after this it will turn off (or not turn off someone) and situation will repeat.
Sorry for bad Englisch. I hope you understand me.
zhuoyang said:
Unfortunately this would take some time. I just can't figure out yet what's wrong with the boot to recovery implementation.
For now , your best bet is updating TA with recovery mode and flash TWRP
or you can hotboot any kernel with recovery using "fastboot boot boot.img"
Click to expand...
Click to collapse
Hi,
I tried to update my ta, but there are only generic softwares (I flashed .368) and no ta update - in emma. Do you know what am I doing wrong? because it's really wierd to boot another kernel everytime I want to go to recovery.
SuperLamic said:
Hi,
I tried to update my ta, but there are only generic softwares (I flashed .368) and no ta update - in emma. Do you know what am I doing wrong? because it's really wierd to boot another kernel everytime I want to go to recovery.
Click to expand...
Click to collapse
did you copy customization.ini to emma installation folder ?
zhuoyang said:
did you copy customization.ini to emma installation folder ?
Click to expand...
Click to collapse
yes, I wouldn't be able to run it if I didn't
edit: can I use the recovery you posted before like fota recovery? because fota recovery works, you only must have recovery built with 3.10 kernel otherwise you have no display.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lineage OS Oreo For Xperia Z2 Taablet
If you were previously on RR N this is (imo) the best ROM move to as when RR O is out you shouldn't even have to clean flash!
Installation Instructions
---If you Update the ROM skip 2,3,4,6,8.
1. Download ROM, Gapps (need newest version) , TWRP recovery.
2. Extract Boot.img from ROM zip.
3. Flash the Boot.img from ROM via fastboot (fastboot flash boot pathTo/boot.img)
4. Flash TWRP Recovery via fastboot (fastboot flash recovery pathTo/recovery.img)
5. Boot into Recovery by using VOLUME UP when Sony logo comes up with pink notification light.
(Orange LED shows Recovery is Loading)
6. Wipe SYSTEM, DATA, DALVIK, CACHE from recovery (Wipe Option).
7. Flash the Rom zip from recovery.
8. Flash Gapps zip from recovery.
9. For D6502 user flash Baseband Patch
10. Reboot.
Downloads
Gapps (Full recommended but not needed)
ROM
Bugs:
Video doesn't work
On some devices 2.4ghz wifi is slow
Miracast (Wireless display) doesn't work
File manager doesnt crashes if you open by clicking on icon - long press and select images instead
To install apk's don't click on downloaded notification but navigate to downloads in file manager and install it from there
Source Code:
https://github.com/LineageOS
https://gitlab.com/opendata26/android_device_sony_sirius
https://gitlab.com/opendata26/android_device_sony_msm8974-common
https://gitlab.com/opendata26/android_kernel_sony_msm8974
XDA:DevDB Information
Lineage OS, ROM for the Sony Xperia Z2 Tablet
Contributors
opendata, rcstar6696, akshay2shah, iXaidyiu
Source Code: http://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: LineageOS
Version Information
Status: Alpha
Current Beta Version: 20171107 (alpha 1)
Beta Release Date: 2017-11-07
Created 2017-11-06
Last Updated 2017-11-06
Very nice.!! Rom download link isnt working... edit: now its working again..
What recovery should i use.. i have now rr rom, and 3.0.2.0 multirom recovery.. is that work?
NICE!!!!
Thanks for the ROM. Will download and install later today. Thanks for the continued work....
[email protected] said:
Very nice.!! Rom download link isnt working... edit: now its working again..
What recovery should i use.. i have now rr rom, and 3.0.2.0 multirom recovery.. is that work?
Click to expand...
Click to collapse
You'll be fine with that
so, just flashed this rom onto a castor. everything works fine so far .. flashed rom - > gapps (full) -> magisk (latest beta)
file explorer bugged yes, but just install another one from playstore
videos works ( mx player played mkv and avi file) netflix and youtube .. no problems
musik is a bit loud but on the other hand videos are a bit low ^^
hotspot working, but without data there is no use to it anyway
ouh one big hit, if you format your sdcard into shared space (internal memory) you are unable to get into twrp
sometimes the tab seems a bit slow with graphics and/or animations (on playstore) , but that's nothing heartbreaking
yeah, love it so far .. looking forward to a castor build with mobile data support
@opendata,
Download link not working. Takes me to transfer.sh site but will not allow to download. Can you put up a mirror?
Edit: dis-regard. link working now...
Battery charges very fast and last long.. much better that N RRrom.
Clock wont move in center even i try.. annoying
[email protected] said:
Battery charges very fast and last long.. much better that N RRrom.
Clock wont move in center even i try.. annoying
Click to expand...
Click to collapse
yeah for me it says 7 days .. can't be right .. gonna check this out
hmm my sdcard says android uses 120gb space
i'm still on aicp, do i must use flashtool with stock rom??? i'm afraid to use it, i dont like idea of back to stock 6.0.1 (never used flashtool before) and again unlock, flash twrp and flash custom can brick device
you can flash it via twrp, no problem.
you don't need to going back to stock oO , just go twrp wipe everything and then flash the rom
so i'll try i thought your build is like builds from rcstar6679 that need using flashtool with stock before flash custom
i know it is rude to ask and i'm sorry, but is there any progress with LOS for castor?
Hi, I am currently on RR Nougat 7.1.2 . Is it necessary to do a full wipe (cache, dalvik, data,system) ?
What happens to sd card used as internal memory?
yes you should do a full wipe, no dirty flash from 7 to 8
it seems that the card gets miscalculated .. doubled size and then android takes half of it oO kind of strange but the same error is on carbon rom, so
it is a oreo error.
Seems like the download link is not working. Anyone got a mirror?
better use the carbon ROM, this Build here is more than outdated and it seems the project is abandoned. So your only choice is Carbon
hillbicks said:
Seems like the download link is not working. Anyone got a mirror?
Click to expand...
Click to collapse
solved said:
better use the carbon ROM, this Build here is more than outdated and it seems the project is abandoned. So your only choice is Carbon
Click to expand...
Click to collapse
The download link works just keep trying. For whatever reason the file host is a bit flaky, but will work if you continue to try.
This is no different then any other ROM opendata releases. The updates come when he has time. On RR Rom we got updates every 4-6 weeks, a little premature to call it dead, he does have other things going on like we all do and hobbies like this take the back seat.
Well, it isn't premature to take a conclusion when he doesn't even answer a simple Question since a month. The download link is DEAD, the file got deleted. So no, there is at this point no other
choice .. Stock / RR Final or Carbon Oreo. btw. this rom was based on LOS not RR. And it is nearly two releases behind.
I for myself still waiting for a new update here for castor (not windy), coz I really hope that a LoS Build would be running more than perfect on this tablet. but i think we will have to wait until
the next year when oreo is out of beta.
Sorry for not answering recently, i am really busy. I should have more free time near end of december which is about the time rr will be released (i will move to that) in the meantime i recommend people go to carbon.
just having joined ...
opendata said:
Sorry for not answering recently, i am really busy. I should have more free time near end of december which is about the time rr will be released (i will move to that) in the meantime i recommend people go to carbon.
Click to expand...
Click to collapse
are there any plans to reactivate the respective OS15 links for castor device?
would like very much to be able to upgrade to something newer than the current 6.0
Download
PixelExperience_honami-9.0-20190129-1643-UNOFFICIAL
PixelExperience_honami-9.0-20190317-1803-UNOFFICIAL
PixelExperience_honami-9.0-20190604-0423-UNOFFICIAL
XREN Kernel
TWRP 3.2.x-0
Magisk
Modem for C6902 NEED TEST, FIRST MAKE A BACKUP
AddonSU
INSTALLATION
1. Unlock bootloader
2. Install via fastboot boot.img
fastboot flash boot boot.img
3. install twrp recovery 3.2.x-0
fastboot commands fastboot flash recovery TWRP-3.2.x-0_Honami.img
4. Boot to recovery and wipe:
cache / dalvik
data
system
5. Install ROM
6. Install XREN-kernel (optional)
7. Install SuperSU or Magisk
8. Done!
Gapps already included
Credits
SpiritCroc: big thanks to him for maintaining the device trees
115ek: thanks to him for local manifest
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
Local manifest - how to build...
XDA:DevDB Information
Pixel Experience for Honami , ROM for the Sony Xperia Z1
Contributors
raschad
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3.x.x
Based On: LineageOS 16.0
Version Information
Status: Beta
Beta Release Date: 2019-01-29
Created 2019-01-29
Last Updated 2019-06-04
you build so many roms without mentioning their known bugs i don't know about other people but i wont go through flashing a rom if i don't even know if the camera works
screenshots?
Hey man could you add F2FS support to one of your Pie roms please?
mrawezome said:
screenshots?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nimrod-002 said:
you build so many roms without mentioning their known bugs i don't know about other people but i wont go through flashing a rom if i don't even know if the camera works
Click to expand...
Click to collapse
Camera working. Everything works as well as on any ROM's Android 9.0
hot!!
raschad said:
Camera working. Everything works as well as on any ROM's Android 9.0
Click to expand...
Click to collapse
Camera doesn't work at my device. But it can found in AIDA64. What happen?
In my opinion, the biggest defect is lack of keyboard support
Is there going to be any update for this rom? Thanks
yuezhengbaizhi said:
Is there going to be any update for this rom? Thanks
Click to expand...
Click to collapse
Soon...
raschad said:
Soon...
Click to expand...
Click to collapse
Ok, can't wait!
yuezhengbaizhi said:
Ok, can't wait!
Click to expand...
Click to collapse
UPDATE
PixelExperience_honami-9.0-20190317-1803-UNOFFICIAL
battry drains fast when screen is off...i think deep sleep is not work well.any solution?
i need full guide to install twrp V3.2.3 for my z1 c6903 Honami
please i need help with a short video or some screen shoots
would be appreciated
i want the ADB guide please
peace
and thanks for contacting me
Fine ROM. Just installed today. No bugs found yet except one - notification sound picker crashes as soon as I open it. Suggest fix. I don't need any notification sound.
any update for that ROM
@raschad
any update for pixel rom please
PixelExperience_honami-9.0-20190604-0423-UNOFFICIAL
My regards mr Raschad, i've tested your latest Pixel Experience Rom and noticed many bugs and issues within it, 1) notification lamp not working or blinking correctly when new notification recieved, 2) a small delay happens when an incoming call from screen echo and on lockscreen mode, 3) Heavy performance experience either Ram usage or cpu i bet this is caused from some google apps like wellbeing service, so i strongly suggest to not including Gapps in your next release, 4) some heating with battery drain happens occasionally also a crash happen with youtube vanced app, other than that this is my Logcat file to check it please, and thanks a lot.
@raschad
Thank you for your great rom update but there are some notices :
1 - the devices sometimes when i restart device stucks in the google display page .
2 - notification led when chraging still red untill reaches 90 % then turn to green .
3 - when installing facebok app the device enters the booting loop and the same thing in the extended rom and rr rom.
4 - when use mobile data the device get very hot .
5 - when i try to change my ringtone , sound app stops and get out it is very annoying
these notices i faced till now
i want you to make battery and carrier style as in iphone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
gapps : MindTheGapps-Lite-12.1.0-arm64-20220611_132739
Magisk 24.3 for root - (Download from here)
First time installation:
backup your goodies
boot recovery
Wipe Caches, data, system
flash crDroid
(optional) flash Gapps
(optional) flash Magisk
boot system
Update installation:
Device trees:
Common (https://github.com/aoleary/device_lge_g4-common/commits/s)Device (https://github.com/aoleary/device_lge_g4/tree/crdroid)Kernel (https://github.com/aoleary/G4-Titan-Kernel/commits/titan)Vendor (https://github.com/aoleary/vendor_lge/commits/s)
Download:
ROM DOWNLOAD
Known issues:
LED blinking issue. Disabled for the moment
Offline charger broken
Display turns off during calls. Only way to turn screen on is to press power button.
GPS seems quite slow
No response from lockscreen lock button sometimes
Still not enforcing !
NFC is no better nor no worse than previous versions
ROM OS Version: 12.1
ROM Kernel: Linux 3.x (heavily modified by me with commits from Bullhead kernels)
ROM Firmware Required: Unlocked Bootloader
Status: stable
Sec. Patches : 2022.08.05
Created : 2022.08.19
Last Updated : 2022.08.19
Visit official website @ crDroid.net
LG G4 Users Telegram Channel => connect directly with other G4 users (and me, as I'm always there )
crDroid Community Telegram
crDroid Updates Channel
Battery life is crazy good in A12..
aoleary said:
Battery life is crazy good in A12..
Click to expand...
Click to collapse
You are the best, great rom, testing
Is there any way to avoid the flashing of the notification light?, by the way very good rom amazing work with the old lg g4
thedery01 said:
Is there any way to avoid the flashing of the notification light?, by the way very good rom amazing work with the old lg g4
Click to expand...
Click to collapse
Yes, I have disabled it for the moment, while we try to figure out why it's misbehaving..
The G4 handles A12 surprisingly well
I will try to release updated builds 2moro
ok thanks, so I'll look forward to tomorrow's update
Uploaded new builds yesterday..
* blinking LED light fixed (disabled it totally)
* some fixes for WiFi to improve stability
* BT stability improved and support for A2DP BT headsets added
* Wireguard VPN support added in the kernel (need to be root for it to work)
Thanks for the rom. Notification light bug is gone. The screen proximity sensor works directly in the phone call. To overcome this, disabling the sensor is the solution. But since the screen stays on all the time, there is a possibility that your face can be touched. I will be glad if you check it out.
thanks you did an incredible job but I have some questions, to know if it only happens to me, I have the lg g4 h811 variant, and when I install custom roms I have a lot of lag, I mean youtube is slow and it kind of gets stuck I would like to know if it's something I'm specific about the roms, or is it that my cell already has a problem, it's as if none of the roms works for me, someone told me that I suffer from ilapo but since my cell is not frozen in the logo and it works normally, but when installing rom This happens to me, can someone tell me what happens thanks.
thedery01 said:
thanks you did an incredible job but I have some questions, to know if it only happens to me, I have the lg g4 h811 variant, and when I install custom roms I have a lot of lag, I mean youtube is slow and it kind of gets stuck I would like to know if it's something I'm specific about the roms, or is it that my cell already has a problem, it's as if none of the roms works for me, someone told me that I suffer from ilapo but since my cell is not frozen in the logo and it works normally, but when installing rom This happens to me, can someone tell me what happens thanks.
Click to expand...
Click to collapse
Do you have this issue for all custom ROM versions, or just in A12?
I have a test build that might fix the black screen. Anyone here willing to test. I have already tested on my device and it seems positive so far..
Dirty flash is OK (that's what I did)
aoleary said:
Do you have this issue for all custom ROM versions, or just in A12?
Click to expand...
Click to collapse
a12 and the majority that I have tried, it is as if the performance in general was worse with rom, any ideas, do you think it is the ilapo, or is it something normal in roms, I thought that the performance would have to improve with rom
thedery01 said:
a12 and the majority that I have tried, it is as if the performance in general was worse with rom, any ideas, do you think it is the ilapo, or is it something normal in roms, I thought that the performance would have to improve with rom
Click to expand...
Click to collapse
As we advance through each android version, it's going to put more and stress on our old device, so it's going to be a bit slower than it was on Nougat, for example..
But i find it still usable on A12. Not as fast as it was on Nougat, but it doesn't grind to a halt either
If it was ilapo, you should have issues booting..
Maybe try formatting the data partition.
Be sure to backup your internal storage as this will wipe everything forever
aoleary said:
If it was ilapo, you should have issues booting..
Maybe try formatting the data partition.
Be sure to backup your internal storage as this will wipe everything forever
Click to expand...
Click to collapse
Well, thank you very much for answering, so far no problems with booting or automatic restart problems, my problem was just that of the lag in the roms, but well, I already understand the lag
I have installed on my lg g4 h815 usu. All features are working well on it, but only security lock like pattern, pin etc doest work. Everytime I try to make pin or pattern, it always reboot to system. Sorry for my bad english.
Btw, tq for your great job.
Kohbidin said:
I have installed on my lg g4 h815 usu. All features are working well on it, but only security lock like pattern, pin etc doest work. Everytime I try to make pin or pattern, it always reboot to system. Sorry for my bad english.
Btw, tq for your great job.
Click to expand...
Click to collapse
Hi,
You're welcome.
Strange, cos PIN works fine for me.
Can you grab a logcat?
This, sir
Kohbidin said:
This, sir
Click to expand...
Click to collapse
I don't see any attachment
Im sorry sir, I forgot