Download
PixelExperience_honami-9.0-20190129-1643-UNOFFICIAL
PixelExperience_honami-9.0-20190317-1803-UNOFFICIAL
PixelExperience_honami-9.0-20190604-0423-UNOFFICIAL
XREN Kernel
TWRP 3.2.x-0
Magisk
Modem for C6902 NEED TEST, FIRST MAKE A BACKUP
AddonSU
INSTALLATION
1. Unlock bootloader
2. Install via fastboot boot.img
fastboot flash boot boot.img
3. install twrp recovery 3.2.x-0
fastboot commands fastboot flash recovery TWRP-3.2.x-0_Honami.img
4. Boot to recovery and wipe:
cache / dalvik
data
system
5. Install ROM
6. Install XREN-kernel (optional)
7. Install SuperSU or Magisk
8. Done!
Gapps already included
Credits
SpiritCroc: big thanks to him for maintaining the device trees
115ek: thanks to him for local manifest
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
Local manifest - how to build...
XDA:DevDB Information
Pixel Experience for Honami , ROM for the Sony Xperia Z1
Contributors
raschad
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3.x.x
Based On: LineageOS 16.0
Version Information
Status: Beta
Beta Release Date: 2019-01-29
Created 2019-01-29
Last Updated 2019-06-04
you build so many roms without mentioning their known bugs i don't know about other people but i wont go through flashing a rom if i don't even know if the camera works
screenshots?
Hey man could you add F2FS support to one of your Pie roms please?
mrawezome said:
screenshots?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nimrod-002 said:
you build so many roms without mentioning their known bugs i don't know about other people but i wont go through flashing a rom if i don't even know if the camera works
Click to expand...
Click to collapse
Camera working. Everything works as well as on any ROM's Android 9.0
hot!!
raschad said:
Camera working. Everything works as well as on any ROM's Android 9.0
Click to expand...
Click to collapse
Camera doesn't work at my device. But it can found in AIDA64. What happen?
In my opinion, the biggest defect is lack of keyboard support
Is there going to be any update for this rom? Thanks
yuezhengbaizhi said:
Is there going to be any update for this rom? Thanks
Click to expand...
Click to collapse
Soon...
raschad said:
Soon...
Click to expand...
Click to collapse
Ok, can't wait!
yuezhengbaizhi said:
Ok, can't wait!
Click to expand...
Click to collapse
UPDATE
PixelExperience_honami-9.0-20190317-1803-UNOFFICIAL
battry drains fast when screen is off...i think deep sleep is not work well.any solution?
i need full guide to install twrp V3.2.3 for my z1 c6903 Honami
please i need help with a short video or some screen shoots
would be appreciated
i want the ADB guide please
peace
and thanks for contacting me
Fine ROM. Just installed today. No bugs found yet except one - notification sound picker crashes as soon as I open it. Suggest fix. I don't need any notification sound.
any update for that ROM
@raschad
any update for pixel rom please
PixelExperience_honami-9.0-20190604-0423-UNOFFICIAL
My regards mr Raschad, i've tested your latest Pixel Experience Rom and noticed many bugs and issues within it, 1) notification lamp not working or blinking correctly when new notification recieved, 2) a small delay happens when an incoming call from screen echo and on lockscreen mode, 3) Heavy performance experience either Ram usage or cpu i bet this is caused from some google apps like wellbeing service, so i strongly suggest to not including Gapps in your next release, 4) some heating with battery drain happens occasionally also a crash happen with youtube vanced app, other than that this is my Logcat file to check it please, and thanks a lot.
@raschad
Thank you for your great rom update but there are some notices :
1 - the devices sometimes when i restart device stucks in the google display page .
2 - notification led when chraging still red untill reaches 90 % then turn to green .
3 - when installing facebok app the device enters the booting loop and the same thing in the extended rom and rr rom.
4 - when use mobile data the device get very hot .
5 - when i try to change my ringtone , sound app stops and get out it is very annoying
these notices i faced till now
i want you to make battery and carrier style as in iphone
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamHorizon's XenonHD
[url]http://www.xenonhd.com[/URL]
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod 14.1 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth.
Flashing Instructions:
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Enter recovery
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 15 minutes
Device Sources:
android_device_sony_odin
android_device_sony_fusion3-common
android_device_sony_common
proprietary_vendor_sony
android_kernel_sony_apq8064
Download Links:
ROM: Official / experimental
Changelog
GAPPS: Open GApps
Additional Information:
This ROM is built for the Unlocked Bootloader.
XDA:DevDB Information
XenonHD for odin, ROM for the Xperia ZL
Contributors
Alex-Gibson
Source Code: [url]https://github.com/TeamHorizon[/URL]
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x (Thanks to @Daedroza)
Based On: LineageOs
Version Information
Status: Stable
Stable Release Date: 2017-08-03
Created 2017-05-14
Last Updated 2017-08-03
Main features:
XenonOTA
XenonHD Changelog
NovaLauncher, Adaway, Kernel Adiutor, SuperSU
Root, adb, dev options, advanced reboot & installing apks enabled by default
Pixel UI, navbar, wallpaper
Material sounds & icons
DayNight theme
Network indicator & battery bar in status bar
Live Volume Steps
DT2S on lockscreen
Custom Quick Settings Tiles
Removed unnecessary things
Under the hood improvements and optimizations
...and more on the way!
Bugs:
Tell me
Links:
G+: https://plus.google.com/u/0/communities/110254322179967248992
Github: https://github.com/TeamHorizon?tab=repositories
Crowdin (translations): https://crowdin.com/project/xenonhd-rom
Please add Sony Xperia z5 support loop kernel
BUWENG15 said:
Please add Sony Xperia z5 support loop kernel
Click to expand...
Click to collapse
Sorry, but i don't get you point.
alex-gibson said:
Sorry, but i don't get you point.
Click to expand...
Click to collapse
Ahh I mean add can't you make rom Sony Xperia z5
BUWENG15 said:
Ahh I mean add can't you make rom Sony Xperia z5
Click to expand...
Click to collapse
Sorry, but i can't
I mean please make Sony Xperia z5 rom
Good job. Very stable. Thank you!!
Update: Display brightness sometimes drop by itself. If you can fix that bug it would be perfect. Thx.
Update 2: battery won't charge if phone is off. Kernel problem? Anything else is good.
BUWENG15 said:
I mean please make Sony Xperia z5 rom
Click to expand...
Click to collapse
We dount make any blindbuilds.
Greetings
So far so good, Everything is fine , expect when using the radio, the sound from the Radio sounds like the wind blowing into a microphone whether with earphone or with speaker, it happens with every channel.
Hi, i try to flash this rom 3 times, from cm12.1 snapshot with use twrp 3.1.1.0 and succesful, but after booting and choose the languade my phone will not go to the homepage, how the fixed?
Hendrauto22 said:
Hi, i try to flash this rom 3 times, from cm12.1 snapshot with use twrp 3.1.1.0 and succesful, but after booting and choose the languade my phone will not go to the homepage, how the fixed?
Click to expand...
Click to collapse
IDK about that. There isn't any problems with this rom on my phone.
alex-gibson said:
IDK about that. There isn't any problems with this rom on my phone.
Click to expand...
Click to collapse
Before install cm12.1 snapshot, i use c6506 firmware, does it matter?
Hendrauto22 said:
Before install cm12.1 snapshot, i use c6506 firmware, does it matter?
Click to expand...
Click to collapse
Nope, it dosen't matter.
why with this rom there is no normal recovery ??
I've been using this rom for about two weeks and thé phone reboots by itself once to two times a day.
I attached the last_kmsg
Between it's a great rom,thanks for keeping our Zl forever young:good:
Bug in Radio.
Turning on the radio and making a call and returning to the radio gives you a wheezing on all stations, making it impossible to hear quality. It is therefore necessary to restart your smartphone to correct the problem.
There is a bug in Phone App. I cannot make or receive calls. Is there a way to fix this? Thank you
I know many of XenonHD users were waiting for this moment...
we're opening a public official telegram group right now!
See you there: http://goo.gl/7roVZk
Error To Reinstall
Hi
Congratulations for this work
I am having a problem installing another ROM or reinstalling the XenonHD property
The following messages appear:
E: failed to map file
E: Error exit from the fuse process: 0
Can someone help me?
Grateful
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the goodness of Oreo. This topic will be dedicated to our bring up of Oreo for OnePlus 5. Sincere thanks to LineageOS team for device tree, kernel and vendor bring up.
While the feature list will be constantly updated, remember the ROM is in beta stage and would expect logs if you want to report issue.
Feature Highlights:
Click Here
OnePlus 5 Specific Feature Highlights:
Sigma Kernel - Upstreamed stable kernel
OTA support
Arm-v8a optimizations
Pre-installation Notes:
Requires latest firmware and modem, one time flash.
Recovery: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/recovery/
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/firmware/firmware_5.1.7_oneplus5.zip/download
Installation steps:
Remove PIN / Password from current build before rebooting to recovery
Clean wipe system partition, cache partition.
For clean install: wipe userdata partition. Clean install required if you're coming from other ROM or facing issues after dirty install.
Flash ROM + Flash Arm64 Gapps
For decrypted devices: Flash latest no_verity zip
Reboot and profit
Installation Notes:
LOS superuser is pre-installed can be enabled under developer options.
Optional: If you want to use Magisk Root solution- you need to flash ROM, reboot once, complete setup and then flash Magisk in recovery.
Optional: For decryption, you must clean wipe everything once and to keep device decrypted, flash NO VERITY FOR OOS 5.0 everytime after flashing ROM - Download Here
Download Links:
ROM - Click Here
Open Gapps for 8.1 - Click Here
Loving this? Support us by donating. :good:
Join us on Telegram for dedicated discussion. :fingers-crossed:
Cheers!
XDA:DevDB Information
crDroid Android, ROM for the OnePlus 5
Contributors
neobuddy89
Source Code: https://github.com/crdroidandroid
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Nightly
Created 2018-01-07
Last Updated 2018-12-21
Downloading...thanks!!!
Is this 8.0 or 8.1?
obol2 said:
Is this 8.0 or 8.1?
Click to expand...
Click to collapse
8.1
What camera does it include?
Sent from my ONEPLUS A5000 using Tapatalk
fjsferreira said:
What camera does it include?
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
AOSP
it's great,but chinese support is poor,changed the ticker setting ,ui will fc and the screen is black after reboot.check and fix pls,thank u very much!
billsz said:
it's great,but chinese support is poor,changed the ticker setting ,ui will fc and the screen is black after reboot.check and fix pls,thank u very much!
Click to expand...
Click to collapse
same here, after reboot black screen...
Maybe too early to ask but does VOLTE work?
i have 2 small problem:
1. wifi is always turn off after reboot device and hard to connect to old point
2. How to swap the hard button?
tks you
romano19 said:
i have 2 small problem:
1. wifi is always turn off after reboot device and hard to connect to old point
2. How to swap the hard button?
tks you
Click to expand...
Click to collapse
about button,u can try some button mapper
Any significant changes in battery life, wrt the final official OOS Nougat Build ?
billsz said:
it's great,but chinese support is poor,changed the ticker setting ,ui will fc and the screen is black after reboot.check and fix pls,thank u very much!
Click to expand...
Click to collapse
This is community development. Please send pull requests if you want to improve translations and share logs for reporting issues. Thanks.
neobuddy89 said:
This is community development. Please send pull requests if you want to improve translations and share logs for reporting issues. Thanks.
Click to expand...
Click to collapse
Pls add Button control in next version.
I can't use hard button to open menu
Long press on Home button for google assistant do not work.
"ok google" do not work.
tks you so much
romano19 said:
Pls add Button control in next version.
I can't use hard button to open menu
Long press on Home button for google assistant do not work.
"ok google" do not work.
tks you so much
Click to expand...
Click to collapse
This ROM uses LOS as base and therefore we avoid conflicts as much as possible. Button mapping will be included once ready with LOS to merge.
"Ok google" works with voice command.
P.S. If you enable navbar, longpress home button on navbar.
@ everyone:
The color seems overkill with temperature.
In Beta 1 build, you can goto Display > LiveDisplay
and set day temperature to 6500 while night temperature to 4800.
This looks good and will be default next build onwards.
Cheers.
For a beta the build Is quite good..a little laggy sometimes..so may need some the touch boost thing which was there in crdroid nougat...oh and also can there be a setting for swapping recent and back buttons(hw)..
Also when changing the device theme in the display menu makes systemui fc..tried rebooting but only shows a black screen..other than that,great work..thnx for the support and your work
Flameron said:
For a beta the build Is quite good..a little laggy sometimes..so may need some the touch boost thing which was there in crdroid nougat...oh and also can there be a setting for swapping recent and back buttons(hw)..
Also when changing the device theme in the display menu makes systemui fc..tried rebooting but only shows a black screen..other than that,great work..thnx for the support and your work
Click to expand...
Click to collapse
Yes, kernel will be enhanced to boost properly.
As mentioned above, button mapping is WIP by LOS team but small workaround is... you can search "Button" in settings and you will see Swap settings there.
I will check theme issue.
Issue with chinese language to be fixed in next build later tonight. Cheers.
Right nice one. Gonna try it later this eve. Hope volte works. ?
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First time installing crDroid to your ENTER-PHONE-NAME, or coming from another ROM: <--THESE MAY NEED UPDATING FOR YOUR PARTICULAR DEVICE; BE THOROUGH IN INSTRUCTIONS-->
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip <--& vendor img, if applicable--> to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
DOWNLOAD:
crDroidAndroid-7.1.2-20180523-nx569j-v3.8.7.zip
crDroidAndroid-7.1.2-20180611-nx569j-v3.8.7.zip
Source code:
device: https://github.com/HighwayStar/android_device_nubia_nx569j
kernel: https://github.com/HighwayStar/android_kernel_nubia_msm8976
vendor: https://github.com/HighwayStar/android_vendor_nubia_nx569j
Thanks to:
[email protected]_ru
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
XDAevDB Information
crDroid,Nubia Z17 Mini
Contributors:
jsbeyond
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: crDroid
Version Information
Status: Stable
Created 2018-05-25
Last Updated 2018-05-25
Thanks! Is an awesome rom.
And is the only with DT2W working!!!
Besides that you can activate work profile and works like a charm.
The only thing I miss is the ability of switching off 1 sim leaving the other on.
Hey @jsbeyond, could you add this function?
Can the speaker work well？
please feedback!
jsbeyond said:
please feedback!
Click to expand...
Click to collapse
I install this rom but No fingerprint.
NX569J
Mega cool news!
Thanks for your work!
What about any bugs?
digital print reader does not work. Any solution?
Fingerprint !!!!
No Fingerprint but except that its a pretty Good Customizable ROM. Please do something regarding Fingerprint... Please please....
will try
a great rom. great job. congratulations.
I think fixing the fingerprint is already for everyone to test.
---------- Post added at 12:53 PM ---------- Previous post was at 12:53 PM ----------
jsbeyond said:
will try
Click to expand...
Click to collapse
a great rom. great job. congratulations.
I think fixing the fingerprint is already for everyone to test.
jsbeyond said:
will try
Click to expand...
Click to collapse
:good::good::good:
it is wonderful!!!
I also heard that the USB modem does not work
vi_ra said:
:good::good::good:
it is wonderful!!!
I also heard that the USB modem does not work
Click to expand...
Click to collapse
It's just hear-say？
jsbeyond said:
It's just hear-say？
Click to expand...
Click to collapse
In a discussion on 4PDA, one of the users wrote.
Now I tried on my device - yes, the "USB modem" mode can not be activated
Hi! Any update ?
I like crDroid so much! Use it on LG G Pad 8.3'' (LGv500)!
Hi!
Should we wait for updates?
crDroidAndroid-7.1.2-20180611-nx569j-v3.8.7.zip
Wonderful! Great! Everything is working! I'm happy like a big elephant!
camera nubia tried the same of lineage, mokee and portrait mode does not work. camera stops working. Are there any native cameras that will work all functions for this rom?
is this rom support VoLTE ?
jsbeyond said:
crDroidAndroid-7.1.2-20180611-nx569j-v3.8.7.zip
Click to expand...
Click to collapse
Very good work!!!!
Everything fine, double sim and camera working. The only problem is that recorded calls can't be played by stock player. Using VLC instead.
I have a question....
While installing this rom my phone became encrypted ( is a good thing ) but I was not interested in this right now.
There's something I can do to avoid encrypting phone while installing?
Thanks and congrats again for your work.
Download
RR-P-v7.0.0-20190124-honami-Unofficial
RR-P-v7.0.0-20190217-honami-Unofficial
RR-P-v7.0.0-20190304-honami-Unofficial
RR-P-v7.0.1-20190314-honami-Unofficial
RR-P-v7.0.1-20190412-honami-Unofficial
RR-P-v7.0.2-20190810-honami-Unofficial
Xperia Camera
TWRP 3.2.x-0
Magisk
Modem for C6902 NEED TEST, FIRST MAKE A BACKUP
GAPPS arm/9.0
AddonSU
INSTALLATION
1. Unlock bootloader
2. Install via fastboot boot.img
fastboot flash boot boot.img
3. install twrp recovery 3.2.x-0
fastboot commands fastboot flash recovery TWRP-3.2.x-0_Honami.img
4. Boot to recovery and wipe:
cache / dalvik
data
system
5. Install ROM
6. Install Gapps
7. Install XREN-kernel (optional)
8. Install SuperSU or Magisk
9. Done!
Local manifest - how to build...
XDA:DevDB Information
Resurrection Remix 7.0.0 for Honami, ROM for the Sony Xperia Z1
Contributors
raschad
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP 3.x.x
Based On: LineageOS 16.0
Version Information
Status: Beta
Beta Release Date: 2019-01-24
Created 2019-01-24
Last Updated 2019-08-11
Changelogs
24.01.2019
-initial release
17.02.2019
- Update from source
- Camera focus button to wake up
- Stereo speaker mod
04.03.2019
- Update from source
14.03.2019
- Update from source
- Change to Carbon source for device (test it)
12.04.2019
- Update from source
- Switch to XREN kernel
- Fixed problems with 5 GHz WIFI channels (Thank's SpiritCroc and 115ek)
- added aptX/aptXHD (Thank's SpiritCroc and 115ek)
11.08.2019
- Update from source
- Update power profile
- more features
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
raschad said:
View attachment 4692564 View attachment 4692565 View attachment 4692566 View attachment 4692567 View attachment 4692568
Click to expand...
Click to collapse
Thanks a lot Bro i was waiting for this soo long
Is this microg supported?
Where can i find the boot.img?
Review
Used for a day pretty stable for initial release but sometimes lags a lot
also flashed XREN kernel
some bugs i found on daily usage
1= camera doesn't work for me
2= lockscreen freezes if i turn off screen and then screen on within 5-6 seconds after on i have to wait in screen off then wakeup after some time
3= some features of rom aren't working e.g. customization also many features of previous roms aren't available
any way thanks for your work for porting such a beautiful rom for us
i was also waiting for your RR Oreo update
that was really awesome rom also with some bugs but a lot of customization :good:
@raschad big trouble with pie stearing i test it and device go to bootloop in Recovery i must completed new flash the rom sry my english is terible
Sent from my [device_name] using XDA-Developers Legacy app
When use pie stearing button in quick settings bar
@raschad big trouble with pie stearing i test it and device go to bootloop in Recovery i must completed new flash the rom sry my english is terible
Sent from my [device_name] using XDA-Developers Legacy app
When use pie stearing button in quick settings bar
Is anyone out here who can bring this nice rom to the Xperia Z2?
17.02.2019
- Update from source
- Camera focus button to wake up
- Stereo speaker mod
Is it stable enough to install it for someone else. Phone is currently on lineage 14 and incall echo is there a problem. Also the speakers don't get loud and distord very quickly. I'm thinking about problems like gps issues, heat or battery problems.
Thanks in advance if anyone can give me some information.
RR is the best rom for our device
i will download and try it
thank you raschad
moh kotb said:
RR is the best rom for our device
i will download and try it
thank you raschad
Click to expand...
Click to collapse
As far as i know yes,and it's the only one out there with too much cutomization, but i tried the RR Pie Rom for now and found some lags and bugs, anyway i will tag My LogCat file to Mr raschad Dev to take a look.
My respect Mr raschad, many thanks for your great work and effort, i tried your RR pie Rom with Rz Kernel for a time and found the some lags and bugs like, First is lockscreen lag and freeze till restarting phone, and there is some of configurations and settings does not applied i'am not sure if this caused from Rz kerel and didn't tried without it, anyway thanks a lot and please this is My LogCat file to check in.
Thank you MR Raschad for thise rom
i try it and its realy Fantastic
but when i use xern kernel, system reboat & reboat ( the same thing with aicp pi rom )
when i using rz kernel , camera is very bad
when installing rom without custom kernel , touch screen is lag , incoming call maybe failed , some feature not work as quick setting in rom customization
what about gps .. it work with me but not fixed whit any satalite...
we waiting next update... thank you.
Is there someone who uses this as a daily driver? Have a spare Z1 and want to use this ROM so my GF can use this phone.
Rubenos said:
Is there someone who uses this as a daily driver? Have a spare Z1 and want to use this ROM so my GF can use this phone.
Click to expand...
Click to collapse
yeaj its pretty stable but some lags
for use as daily driver try RR N official built for stability
Dison Reigns said:
yeaj its pretty stable but some lags
for use as daily driver try RR N official built for stability
Click to expand...
Click to collapse
All Pie roms for this phone have been slow imo, Oreo is very smooth and stable for me though.
Chocolatetrain said:
All Pie roms for this phone have been slow imo, Oreo is very smooth and stable for me though.
Click to expand...
Click to collapse
eah bro oreo was smooth but not stable as compared to nougat
try and see the difference
---------- Post added at 07:42 AM ---------- Previous post was at 07:38 AM ----------
and bonus point is i also flashed a moded sony camera by raschad and i got manual controls and higher fps videos on nougat but not oreo or pie
i don't know why but on resurrection remix nougat its working same as cyberian camera o even better because front camera also working thats was missing in cyberian
thats my opinion
try yourself
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
OXYGEN KERNEL (compulsory to boot)
DOWNLOAD GAPPS
First time installing crDroid to your Galaxy J7 2016, or coming from another ROM:
** Make sure you're running the Official TWRP Recovery
1) Copy crDroid zip, oxygen kernel zip & gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Flash oxygen kernel (linked above)
6) Flash gapps
7) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
NFC
WORKAROUND
USB Preferences greyed out - Go to developer options - Choose Default USB Configuration - Select File Transfer. (will try to fix in future builds)
J710MN WiFi Fix
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
crDroid G+ community
Sources:
Kernel Source - https://github.com/DarkLord1731/j7xelte
ROM - https://github.com/crdroidandroid
Contributors:
@Ruturaj Kadam
@DarkLord1731
ROM OS Version: 9.0 Pie
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Official TWRP Recovery
Based On: Lineage OS
Version Information
Status: Stable
Stable Release Date: 2019-05-14
Created 2019-05-14
Last Updated 2019-05-14
Reserved
thank you
Thank you! I'll taste it!:good:
UNLOCK
Bug in lock screen unlocking. Can't unlock.
Any bugs?
I heard that Android 9.0 is not stable on j7xelte
EvilScout said:
Any bugs?
I heard that Android 9.0 is not stable on j7xelte
Click to expand...
Click to collapse
just nfc
chechemon said:
Bug in lock screen unlocking. Can't unlock.
Click to expand...
Click to collapse
There no such bug. Still fi you're facing it, please provide a logcat. Its a source side bug.
is there any way we can get the radio working? I love this ROM as this is the best Rom i have come across. Big ups for the CrDroid Team and Keep up the Good work Guys.
hi
is this rom working on j7100fq?
returk said:
hi
is this rom working on j7100fq?
Click to expand...
Click to collapse
No, only J710, J7 2016
returk said:
hi
is this rom working on j7100fq?
Click to expand...
Click to collapse
Yes, It works on j710fq
the rom is great and works well, but when running games goes with a lot of lag. : '(
TRalperenTR said:
Yes, It works on j710fq
Click to expand...
Click to collapse
thanks
which gapps i have to install for this rom, android 8.1 or 9.0 ?
deep sleep issues in tis rom Overnight drain
Kavita437 said:
deep sleep issues in tis rom Overnight drain
Click to expand...
Click to collapse
Yes, no deep sleep! 0 min 0 sec.
But ROM is great!
Is this ROM for SM-J710FN?
I tried to flash this rom and I got black screen on boot and nothing else. Just black screen.
Help! :0
Oh, sorry. I have forgotten to flash Oxygen kernel. Problem solved
EvilScout said:
Is this ROM for SM-J710FN?
I tried to flash this rom and I got black screen on boot and nothing else. Just black screen.
Help :0
Click to expand...
Click to collapse
I have SM-J710F, and this ROM worked good.
I hold Power+VolumeDown after flashing, and booting norm.
I found 3 bugs on SM-J710FN:
1. When all animations in Developer settings turned off and I tried turn off the screen with power button, screen doesn't turn off, it just making not so bright. It's happening not every time, just with some chance.
2. Internet from SIM works not so good. I always have E instead of 4G or LTE. When I was on other ROM with Android 8 it worked good. Any ideas to fix it?
3. Oxygen kernel do not apply settings on boot via Oxygen control v2.0.0
Another bug: User switch works not good. Not all crDroid's and Android's settings come back after switching from Guest to Owner. Also android crashed on switching them the first time.