i got a in car install using elementalx kernel with otg charging enabled. but i have an issue. i use tasker to turn the device off after 10 minutes of being off the charger and i have the charger set to turn on with the car. well it works fine except until i go to turn the car back on the tablet turns on like it recognized a charge(tablet turns itself on when charger is connected) but yet soon as it gets into the home screen its not recognizing a charge and after 10 min it turns off from tasker... this only seems to happen with otg charging i brought the tab inside and tested on a wall charger without otg and it did just fine. does anyone know whats the issue with it charging on otg after a reboot?
btw im running cm11 with elementalx. not android 5
no one?
Having the same problem have to physically reconnect charger, anyone?
Related
Everytime I plug my Fresh 3.5.0.1 Evo into either my car charger or my playstation energizer charging station using USB rocketfish cable, it starts to charge for like two seconds. Then it stops. The lightning bolt shows up and then goes away. Any thoughts? Is this just a kernel issue? Is there a fix for this? Anyone else had this issue at all?
For the car charger, is either your cable or not plugged in secure? And the playstation has to be on for it to charge, not like the 360 where it can charge a device while its off.
Not a connection issue
This not a physical connection issue. For some reason my phone stop recognizing that it is plugged in. I can unplug the charger from USB/Lighter while still leaving it plugged into the phone and if I do it over and over it seems to except it after a while.
I heard from someone that this might be a kernel issue, is anyone familiar with kernel issues that cause a phone to think it is not plugged in?
On my primary car I use a USB adapter to charge the phone. Prior to the SG2 I had a HD2 which (I think) charged fine.
If the phone has a zero charge I plug it in and it will automatically boot and the charge indicator shows charging but the battery indicator does not move for a while. Charging when using the phone never seems to keep up with the charge. After about 5 minutes the top indicator (when phone is on) starts to move and the phone will charge - although it seems pretty slowly.
The weirdness - when I plug in the USB cable to a laptop when its off the battery indicator lights up on the screen (pictagram) showing the phone is charging but it doesn't boot which is correct. What is weird is below:
In the car when you attempt to turn it off the phone with the long power button press and select the right options the phone will close down - you get the TMobile logo then the screen blanks out - then IT REBOOTS on its own!
Could under voltage be doing this? or is the cig port doing something odd with the voltage or amps? Know the USB port works and charges because I can charge it off a laptop, wall charger, computer etc and it works as it should. Its not the cable because I tried it on the computers.
Also tried a different usb/cig adapter - actually three and get the same results. Car only has 1 cig port.
Anyone have an idea?
I just started to have charging issues a few days ago. I have not changed my charging equipment and don't think it's hardware. I have tried a variety of wall chargers and cables - some Samsung and some not.
Here are a few facts (as far as I can tell, from testing).
USB connection (I almost never charge this way, but it's helpful in the car.)
- Charges fine connect to USB/Wall charger when phone is power down (completely off).
- Leave it connected to wall charger and boot and then it no is no longer charging (after it was charging fine while off).
- I did get it to charge after booting it a number of times. I don't know what triggered it.
- I made sure to hold the device steady while booting to make sure I didn't change the cable contacts
Desktop Dock (This is how I usually charge - in the dock while I sleep)
- Charges fine in dock when phone is power down (completely off).
- Sometimes starts charging and engages Daydream when put in the desktop dock
- If it doesn't charge in the dock, a reboot usual starts it charging/Daydream again
This sure sounds like a software problem to me, since it charges fine in both scenarios when it is powered off. Any ideas about any software or device settings that may block charging after boot? Any other ideas on what is happening?
Device particulars:
Galaxy Nexus i9250 purchased from Google Play US
Android 4.2.2
Rooted using Nexus Root Toolkit (from Wugfresh)
Stock recovery
pins problem in mini usb port. search xda how to fix it.
samersh72 said:
pins problem in mini usb port. search xda how to fix it.
Click to expand...
Click to collapse
Thanks. I have cleaned the port out and moved the pins toward the screen. it doesn't seem to have helped.
Hi this morning when i try to turn on my tablet did not turn on
My tablet only turn on with the charger pluged in the ac power.
When i turned on the tablet Immediately turn off
I do not know what to do :crying:
Tony22123 said:
Hi this morning when i try to turn on my tablet did not turn on
My tablet only turn on with the charger pluged in the ac power.
When i turned on the tablet Immediately turn off
I do not know what to do :crying:
Click to expand...
Click to collapse
When connected to the AC adapter does the tablet indicate it is charging by displaying the battery level on the screen while powered off?
You can try:
Make sure you are using the USB cable that came with it as some others may not be properly wired for the tablet to charge.
A different AC power adapter and make sure it is at least 2 Amps (2000ma) ~5.3 volts output
Try connecting to the USB on a computer. You should see the battery indicator show almost as soon as you connect it. You may also see the computer try to install drivers for it or if the drivers are there it should recognize it to some degree. It will NOT charge when connected to a PCs USB port while it is turned ON. It will charge while it is OFF but at a very slow rate. Leave it OFF and let it charge for about 10 hours then safely disconnect and see if it will turn on.
My Oneplus 3 does not (or at least it seems like it does not) charge when it's turned on. I plug in the (original) cable and nothing happens. The Led Indicator doesn't turn on and the Battery Symbol doesn't show anything.
When I turn off the device and then plug the cable in it charges like it normally does. When I then power on the device it continues to charge.
Power brick / cable shouldn't be faulty as it charges perfectly when turned off.
This occurred the first time after the 3.2.2 OTA Official Update.
Any ideas, suggestions etc on this one?
EDIT: Ampere App does not read anything when plugging in.
EDIT2: might be a loose connection - didn't work now when powered off then later worked again when powered off. I didn't thought USB Type C would be so sensible
Wipe and flash full rom, your hardware is OK
Or wait here for someone smarter
Sent from my OnePlus3 using XDA Labs
Same issue
I too have the same issue since yesterday. UPdated to Oxygen 4.0.2 and then the issue started.
Charges only when switched off. I am using original dash charger and cable. Tried with another USB C cable and charger, issue persists!!
Can you please help.
natsnaashi said:
I too have the same issue since yesterday. UPdated to Oxygen 4.0.2 and then the issue started.
Charges only when switched off. I am using original dash charger and cable. Tried with another USB C cable and charger, issue persists!!
Can you please help.
Click to expand...
Click to collapse
Same advice as above.