Develop Bugs

[Q] Phone Reboots random after system update with charger connected

Hey every one,
I have the following problem with my dads new HTC one V...
The phone asked for a systemupdate so i did, but didn't read the instructions to carefully. (Overconfidend...) Actually though hm i'm so smart lets put in the charged incase it might take to long i get screwed.
Turn out that it SPECIFICALLY said to NOT do that. -_-'
"When the battery charged to 50%, I started the update process but left the “smart” phone connected with charger. After the phone restarted itself, it just showed a static green round arrow icon and no status or progress bar. After waiting for more 30 minutes, that scary motionless screen remained unchanged, looked like it’s hung or stopped updating.
Luckily I did take some screenshots of system update screen and sent to Gmail prior to the update process started. Here is the answer to the problem – avoid charging your phone during the update as it may interfere with the process
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After awhile i heard the startup sound of the phone coming from the other side of the room randomly... I checked the phone and saw that i rebooted. I could still enter pin code but now it randomly reboots!
Any help here?
---
Phone specs:
HTC ONE V
Android verz: 4.0.3
HTC Sence: 4.0
Software number: 2.09.114.1
HTC expansion: HTCextension_403_1_GA_5
pk76100 (under the sim cover)

try a factory reset...
(the only thing i can think of now...)

ryanlow134 said:
try a factory reset...
(the only thing i can think of now...)
Click to expand...
Click to collapse
In os under: settings-storage or in the bootloader? I have no root so i can still send it back...
Sent from my HTC Wildfire S A510e using XDA

samkuiper9 said:
In os under: settings-storage or in the bootloader? I have no root so i can still send it back...
Click to expand...
Click to collapse
"Factory Reset" is in the bootloader
regards
max

[Q] Demo mode Kindle Fire, trying to restore to original

Hi,
I recently acquired a Kindle Fire that was previously used as a Demo unit in a store, I'd like to get it out of Demo mode but having tried since Sunday (and following several threads on here with similar problems) with no success I thought I'd see if I can get any help.
This is my first Kindle, so I'm new to that, but I've owned several Android devices in the past, so I'd consider myself fairly familiar with ADB, Fastboot, etc.
Since I can't get into the settings on the Demo unit I haven't been able to enable USB Debugging, to cut a long story short after playing around all day Sunday trying to get KFU to communicate with the device I gave up and ordered a Factory USB Cable to get it into Fastboot mode.
That arrived This morning and the Kindle is now in Fastboot mode, but I'm not sure what to do next, the PC (Windows 8 64bit, but I've also tried on Vista 32bit) sees the device as: Otter2-Prod-04 with a yellow exclamation mark icon and KFU still doesn't seem to be able to communicate with the device.
I'm running out of ideas, any help would be appreciated.
Thanks,
Jason

Never mind, I got KFU to recognise the device finally but I think it's bricked it, it's just black now with no light on the power button or anything.
I don't suppose there's any way to fix that?

JFenlon said:
Never mind, I got KFU to recognise the device finally but I think it's bricked it, it's just black now with no light on the power button or anything.
I don't suppose there's any way to fix that?
Click to expand...
Click to collapse
how did you do to make windows recognize the kindle under otter2-prod-4???

JFenlon said:
Never mind, I got KFU to recognise the device finally but I think it's bricked it, it's just black now with no light on the power button or anything.
I don't suppose there's any way to fix that?
Click to expand...
Click to collapse
My Motivation For work LOL
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great cup I like it, looks good, I recommend to get one, thanks!
Redbubble Sale

[Q] Is my SPH-L710 Toast?

Hi guys, I've been scouring Google for 3 days now and can't come up with an answer, everything says use Odin for this and use Odin for that... well I can't.
A few days ago I downloaded an app from the Google store Linuxonandriod or something like that, it's pretty much an installer to place Ubuntu on your phone side by side with Android, the instructions began with rooting the phone, I began that process and believe I accidently loaded the incorrect pda to the phone (I have so many files now on my comp, I have no clue which one I selected). Odin rebooted the phone and that's that.
If I try to turn on the phone it goes to the first screen that just says SAMSUNG then turns off, never getting to the Samsung Galaxy III screen. The USB on the phone seems to have been botched, none of my computers will recognize it (Windows or Linux), the phone will not even charge. I can however get into both recovery and download modes without problem.
Naturally, download mode does no good because the USB is useless and I do not have clockwork mod installed on the phone to bypass the verification error.
I tried to simply install clockwork via recovery in hopes that would do something, but I get a verification error with that.
Is there anyway around this using the SD card or am I holding a $300 paperweight?
Thanks

Maybe try this-http://forum.xda-developers.com/showthread.php?t=2369125
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bilgerryan said:
Maybe try this-http://forum.xda-developers.com/showthread.php?t=2369125
Click to expand...
Click to collapse
Thanks, for the link. I did check it out, but couldn't figure out what the poster was talking about with drive letters and such. That dmesg | tail told me nothing about my sd. I unzipped everything to the card by a different method but my the computer still wouldn't recognize the phone, so booting back into windows did nothing.
Sorry for the delay in response, I've been extremely busy with work.
I'm still at a total loss on this.

Zenfone 2 (Z00A) No bootloader + no OS + "Broadcast tv" loop

Hi Developers.
This is my first post but I've used this forum for many devices before.
This is what happened:
Atfer update to android 6.0.1 (M), I got some "bugs" (freeze) after I tried to root the device (using this method). I failed the first time I got a bootloader loop. I googled it and found this method (same commands but adding a "fastboot splashscreen.img"), then my phone just got a blank screen loop. My next step was the xFSTK method (this one). My phone booted "normally" and then I tried to update it to 6.0.1.
After that, my phone just got stuck in ASUS logo. I tried the xFSTK method and in the middle of the Flash Tool process, I interrupted it, because it was taking so long. I tried xFSTK process again but I got a "FW+iOS failed" and the attached screen loop (like a broadcast tv).
Please... Help.
(note: I don't speak/wrtie english very well. I hope you guys understood me)
http://imgur.com/a/2B1GB
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://i.imgur.com/Dr3KVb6.jpg

Solved, thanks to sukhwant717 for his post
And his quote:
those who are not able to keep device connected. take care of few steps
1. in xFSTK option menu change the flag override value to 0x80000807 not 0x800000807 ( don't forget to click gp value over ride)
2. while connecting to xFSTK attach usb to computer. hold power button for 20 seconds to make sure it power downs completely. then hold the power button down and click power button. wait till device vibrate or computer makes detection sound. leave power button but keep holding the volume button for few seconds
-sukhwant717
Click to expand...
Click to collapse

mrperalta said:
Solved, thanks to sukhwant717 for his post
And his quote:
Click to expand...
Click to collapse
glad to know that helped you

[HELP] G532M Can't upload firmware via "DOWNLOAD MODE" since it gets stuck at half!

[HELP] G532M Can't upload firmware via "DOWNLOAD MODE" since it gets stuck at half!
Hello everybody, first thread on XDA.
I will tell you about my problem since it seems to be unusual.
I have a J2 Prime G532M that one day suddenly when I woke up and I turn on my phone a blue screen with the following message appeared "this phone has been flashed with unauthorized software [...]" this made me confused because my phone had the OFFICIAL ROM and I've never rooted it.
So I downloaded the official rom from Sammobile and I tried to flash it via Odin. The weird issue here is that when I try to flash it it stucks at half of the process. Sometimes at 12% exactly when it arrives at 360mb/3.75gb uploaded to the device. I downloaded two differente roms bc I thought that the first was corrupted, but both of the roms makes the same.
Also, when the phone is in Download Mode after disconnecting and reconnecting the phone to the computer Windows shows me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
"The last USB device you connected to this computer malfunctioned, and Windows does not recognize it".
When I first connect the phone everything its OK. After a while (10 seconds approx) the phone stop receiving data from Odin and when I
reconnect it Windows shows that.
What my problem could be? i'm reading all the comments. Thanks in advanced.

Try using another usb cable. Maybe it's because of your usb cable. Because my phone is J2 PRIME SM G532G Variant I was FRP locked by google but then when I try to flash my stock rom via Odin it stucks and stops halfway of the process. So what I did is just changed my USB Cable and it worked for me. Hope it works for you too. There are a lot of options changing your usb cable. Or so I could analyze the real problem here include the logs of your Odin here when it stopped halfway. Copy your Log and paste it here.