Related
Hi,
Long story short, i broke my digitizer, replaced my digitizer, broke the ribbon connection on the motherboard for the LCD. Now I just finished selling it on EBay.
I just realized it might be an issue with a lot of personal info still stored if someone actually gets the phone working properly..
Any suggestions on ways to wipe the phone without using recovery mode?
I have been able to successfully connect computer to the phone using Fresh Kitchen and am able to run adb commands. As far as anything else, I don't know what to do.
My phone = Rooted with 2.2 (Latest Fresh Rom)
I just need to wipe, I really want to unroot. Hard to figure out with not having a working LCD screen.
Actually, it would be nice if someone can give me exact buttons to push in recovery mode to get there.
All i know is to hold down (-) volume and while holding power button. I might be able to navigate to the point of wiping data by doing it blind. Anyone know correct configuration...or easier way?
Update:
I think I might have figured it out. I did this:
-------------
adb shell
wipe data
------------
Can anyone confirm that this would erase all personal data and bring rom back to default?''
Update 2:
Figured out how to unroot. I'm set.
So I got root. Ran Clockwork Mod. Backed up to the SD card. Rebooted.
Now I'm stuck between the Clockwork recovery screen (if I power/camera/volume down) and another apparent recovery screen (regular power on) that says in blue "Android system recovery (2e)" and at the bottom, in yellow, "# Manual Mode #" . . .
I'm not able to get out of these two screens. I've pulled the battery and the card, chosen the "reboot" option, chosen the "restore" option (CWM), etc.
Can anyone help me get my phone working again?
Thanks in advance!
I would odin back to stock if you can get into dl mode
Can you reflash your ROM in the CWM? If not then Odin or Heimdall would be easiest then restore your backup.
Thanks guys. I used Odin - lost all my data (which I was of course trying to avoid), but got my phone back.
So, I've learned 2 valuable things here:
1. I was able to get root (sort of).
2. I was able to recover my phone (but not my data).
Does anyone have an idea as to how I got stuck in that loop in the first place - and, more to the point, how I can get past it so I can actually use my phone after I get root?
Although I'm very busy (work full-time, school full-time), I'm willing to make a reasonable donation to someone who's able to spend a little time to get me off and running.
Use odin to install something thats pre rooted like http://forum.xda-developers.com/showthread.php?t=1221614
Your situation is kind of unique. But as mentioned above Odining a prerooted ROM will help. Didn't you say you backed up before all this happened? Why did you lose your data? Root and restore.
Sent from my SPH-D700 using XDA App
Thanks, I did get most of my stuff back. I'm still kind of a n00b at this, so it wasn't apparent until I started looking for it. I thought it was gone because my apps were, and I hadn't yet reupped gmail, so my contacts list wasn't apparent. In the end, other than having to remember all the apps I wanted to get back, the only real disappointment was that I lost my place in the game Big Time Gangsta, so I had to start over. I was up to level 53!
In reality, though, the only thing that was super important to me, my contacts, came back. So I'm a pretty happy camper. I was also able to Odin up that rooted Gingerbread and, to top it off, I now have a free tether hooked up and working - my rationale for rooting the phone in the first place.
I do appreciate everyone's help. Sure I'll be back with more questions!
Marco
Glad we could help
Not yet rooted - stuck in manual mode
I was in the beginning stages of rooting, couldn't get anything to happen when I was in Downloading mode. I then booted with Vol Down-Camera-Power, and I can't get OUT of it. I have no OK button, and the Camera button isn't working to reboot/select. Please help!!!
emersonkelli said:
I was in the beginning stages of rooting, couldn't get anything to happen when I was in Downloading mode. I then booted with Vol Down-Camera-Power, and I can't get OUT of it. I have no OK button, and the Camera button isn't working to reboot/select. Please help!!!
Click to expand...
Click to collapse
HOME key
Sent from my SPH-D700 using Tapatalk 2
First of all, I'd like to apologize if I'm breaking any forum rules. I just hastily made this account because I did something stupid and I need your help.
I rooted my Nexus 7 a few days ago, and it all went well. While looking through root apps on the Play store today, I found a font switcher. It looked alright, so I figured I'd download it. I picked out a font, hit install, and the device rebooted as I would expect. It showed the Google logo, as well as the padlock icon, and then went to the "X" as per usual. However, it stayed on that screen for quite a while and would not start up. The bootloader menu still works, but I can't really do much with it. I'm afraid I had USB debugging turned off as well. Please help, I don't have a clue what to do and I don't want to have it permanently bricked less than a month after buying it. Thank you in advance.
P.S. You'll have to explain the terms to me, rooting is sort of a new area for me.
Factory reset ?
hyperxguy said:
Factory reset ?
Click to expand...
Click to collapse
I wouldn't mind doing it, but I can't as I can only access the bootloader menu and I don't have any recovery programs installed.
I'm not very familiar with stock recovery (assuming that's what you have. I've never seen the stock recovery since I wiped stock off my tab as soon as I could). But doesn't it have a factory reset option ? (I thought I saw that on my old N7 when it was still on stock form)
Edit: you can get to stock recovery from the bootloader menu. Just use volume up/down to rotate thru menu options and hit power to select.
hyperxguy said:
I'm not very familiar with stock recovery (assuming that's what you have. I've never seen the stock recovery since I wiped stock off my tab as soon as I could). But doesn't it have a factory reset option ? (I thought I saw that on my old N7 when it was still on stock form)
Click to expand...
Click to collapse
I tried entering recovery mode and I got an error icon, then after a while it just rebooted.
Is your tab OK now ?
Don't worry too much, it's very difficult to "brick" a N7.
You may look at this tool:
http://forum.xda-developers.com/showthread.php?t=2389107
It's easy to do many things.
The hardest part would be to get your PC to fully recornize your tab (which you're there, since you rooted the tab).
If you don't mind losing data, you can just flash stock back from fastboot. If you want to try factory resetting, you can flash a recovery image from fastboot, then reset from there. Fastboot is done from the bootloader.
hyperxguy said:
Is your tab OK now ?
Don't worry too much, it's very difficult to "brick" a N7.
You may look at this tool:
http://forum.xda-developers.com/showthread.php?t=2389107
It's easy to do many things.
The hardest part would be to get your PC to fully recornize your tab (which you're there, since you rooted the tab).
Click to expand...
Click to collapse
Yes, it's fixed. I found a recovery tool in WugFresh's toolbox.
Hi there. My fire TV is rooted and has the following installed:
clockwork mod custom recovery
51.1.4.0_514006420 updated 10/30/2014 Custom rom
I was initially experiencing strange behaviour with my external hard drive converting to a read only drive after a while for no apparent reason so decided to do a factory restore
I tried to factory restore the device but for some reason after the factory restore and watching the funny cartoon on set up the device said I only had 2.5gb of hard drive space left of the 5.5 gb available so I decided to try formatting the data on the clockwork mod restore but it still didn't work so I then formatted the sd but as soon as I did this I thought that can't be right as surely the recovery image is on that but it was too late. After it rebooted the fire TV no longer works. It just hangs on the White amazon logo. I've tried the "ALT-PRNT SCREEN-I" option to try get it to restore but with no luck, it just constantly stays on the White amazon logo so I'm kinda thinking I've totally wiped the fire TV and have therefore bricked it. It does respond to "control-alt-delete" but that just reboots the device.
Can anyone advise if this is indeed the case so I don't waste any of my time trying to fix this. I can't return the product as I purchased it on a recent holiday to usa and I'm from uk so a bit gutted.
Many thanks in advance
Paul1672
Sounds like you wiped your /system. If so, then yes you are soft bricked.
I have soft bricked this unit before and managed to restore it but that was before I installed the clockwork mod and custom rom.
If it is soft bricked surely I would be able to restore it still? I have tried several times to get it to return to the clockwork mod restore using the "ALT-PRINTSCREEN-i" method but all I get is the constant white Amazon logo. It feels like I've totally wiped the entire system including all sign of clockwork mod
Can anyone advise if I have indeed totally messed it up or is there any hope for me?
Paul
Anybody got any advice or opinion be it good or bad?
Before I bin the unit
Paul
Paul1672 said:
Anybody got any advice or opinion be it good or bad?
Before I bin the unit
Paul
Click to expand...
Click to collapse
Yes, I have some advice. Don't do that crap again. Be smart. And I'm a bit curious, you talk about an external harddrive and you then talk about wiping the SD card. You mean the /sdcard directory in the AFTV? Seriously? If that is the case, I have some better advice for you. Don't tinker with stuff you don't understand.
So I can assume from your reply I have indeed wiped the entire system and there is in fact no way to repair/restore the device? Totally agree with all you said and I did realise my error literally as soon as I did it a harsh lesson learnt I think and believe me it's not one I will be repeating.
Was just hoping I may be lucky and find someone who has a way of solving my issue but it appears not
Paul
Hi
What's your suggestion or advice be to resolve the problem that was presented.
Cheers
nyder said:
Yes, I have some advice. Don't do that crap again. Be smart. And I'm a bit curious, you talk about an external harddrive and you then talk about wiping the SD card. You mean the /sdcard directory in the AFTV? Seriously? If that is the case, I have some better advice for you. Don't tinker with stuff you don't understand.
Click to expand...
Click to collapse
Paul1672 said:
So I can assume from your reply I have indeed wiped the entire system and there is in fact no way to repair/restore the device? Totally agree with all you said and I did realise my error literally as soon as I did it a harsh lesson learnt I think and believe me it's not one I will be repeating.
Was just hoping I may be lucky and find someone who has a way of solving my issue but it appears not
Paul
Click to expand...
Click to collapse
Naw, you didn't brick you device. Sorry, was in some sort of mood when posted.
http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/
That link gives information. You need to get into recovery mode and a factory restore. If the factory restore doesn't work, then just use the same firmware you had before you deleted the stuff. You can put any firmware on a usb stick and read it from that.
Most of this has been covered in the various threads, I suggest you browse thru them, lots of good stuff.
good luck, and sorry I didn't include this in my last post, i should of.
Are u sure mate? I've tried the Alt-prntscreen-I method without any success. The fire tv won't boot into the clockwork mod recovery at all and I'm wondering if I've formatted it somehow. I guess until I get into the restore screen I can't do a thing I did have clockwork mod installed and a custom rom, wud that make a difference as I did indeed format the fire tv sd partition.
Appreciate your help
Paul
Paul1672 said:
Are u sure mate? I've tried the Alt-prntscreen-I method without any success. The fire tv won't boot into the clockwork mod recovery at all and I'm wondering if I've formatted it somehow. I guess until I get into the restore screen I can't do a thing I did have clockwork mod installed and a custom rom, wud that make a difference as I did indeed format the fire tv sd partition.
Appreciate your help
Paul
Click to expand...
Click to collapse
You should be able to get to a recovery screen from what you did, I would think, unless maybe if you deleted everything from the root directory, not the sdcard directory. I am not an expert on that though. It's our thanksgiving holiday here in the states, so the peeps that know might not be around.
Sorry I can't be more helpful then that.
You copy your recovery.img to the sdcard only as an interim step for flashing. It then gets stored in a separate partition that CWM won't wipe. If you have done the changes you mention from CWM, then CWM is still present on the device. I had to get in to my system with the alt-prtscreen-I method as well, and it took a few tries, spamming the keeps after unplugging and replugging the device. Also if you are using a k400 or some other keyboard with a FN key you may have to push that as well to make sure it gets the proper key sequence. I'm fairly confident your device is only softbricked and can be recovered. you may need to adb sideload or copy a zip to usb to load the firmware, but it should be doable.
well, I've tried constantly rebooting and pressing alt-printscreen-I simultaneously for the last half hour with no luck wotsoever all I get is the constant white amazon logo. in fact, the logo appears as soon as I connect the power lead and just hangs there until I either remove the lead or press control-alt-delete at which point the device reboots.
something tells me I've done something a lot more serious than just wipe the sd partition but I'm a little surprised if clockwork mod would allow it.
kinda giving up now as I have soft bricked the device before but that was before I installed clockwork mod and it went to factory restore just fine doing the alt-printscreen-i method that time.
thanks for all the advice guys. I really do appreciate any help I have had. I'm willing to try anything to try get this unit to work. the way I see it, I have nothing to lose right now. just seems strange the unit no longer shows any sign of changing from the constant white amazon logo. there's definitely no sign of the colourful amazon logo that usually appears at some point during the boot process which kinda gives me the impression I've somehow completely wiped the whole system.
is that even possible guys?
If you are saying that ctrl-alt-del reboots your box then the alt -sysrq-i should get you to recovery. Try using a wired keyboard and maybe a different keyboard than you have been using.
Ive tried a wired keyboard and now when I press ALT-PRNTSCREEN-i the fire tv just reboots. I've followed the guide that is in a previous reply which I have been able to do on a previous unrelated soft brick I managed but this time each time I do the ALT-PRINTSCREEN-i combo it just reboots and nothing else. Just a white AMAZON logo. I have done the method like 5 times and still no joy
Paul1672 said:
Ive tried a wired keyboard and now when I press ALT-PRNTSCREEN-i the fire tv just reboots. I've followed the guide that is in a previous reply which I have been able to do on a previous unrelated soft brick I managed but this time each time I do the ALT-PRINTSCREEN-i combo it just reboots and nothing else. Just a white AMAZON logo. I have done the method like 5 times and still no joy
Click to expand...
Click to collapse
Call Amazon and play stupid saying it just hangs at the logo, I did that once and they send me a replacement free of charge.
Wish I could but i purchased it whilst on holiday in Florida and I'm from the uk
Anybody got any more advice? It seems really strange that I can't get the factory reset to work. Still stuck on the White Amazon logo which boots instantly as soon s I power the device. I've managed to get the device to power cycle using ALT-PRNTSCREEN-i method bit it's does it going on 20 times with absolutely no sign of the failed update screen so it looks like the device just doesn't have anything on it. Is it possible I've somehow completely wiped the clockwork mod recovery? And if I have shud the device revert back to factory restore or may I of wiped that too?
Paul1672 said:
Anybody got any more advice? It seems really strange that I can't get the factory reset to work. Still stuck on the White Amazon logo which boots instantly as soon s I power the device. I've managed to get the device to power cycle using ALT-PRNTSCREEN-i method bit it's does it going on 20 times with absolutely no sign of the failed update screen so it looks like the device just doesn't have anything on it. Is it possible I've somehow completely wiped the clockwork mod recovery? And if I have shud the device revert back to factory restore or may I of wiped that too?
Click to expand...
Click to collapse
no its not possible that you wiped recovery from what you did in cwm.. its located on a different partition, if you cant connect via ADB or cant get recovery to load your out of luck.. so did you install the newest prerooted rom? what about the boot menu?
I had the following pre-rooted rom installed:
51.1.4.0_514006420 updated
Sounds like I've messed it up then
Paul1672 said:
I had the following pre-rooted rom installed:
51.1.4.0_514006420 updated
Sounds like I've messed it up then
Click to expand...
Click to collapse
no need for the boot menu on that update iirc. i think you need to just keep trying to get to recovery, i think its still there.. the key command is just not registering.. keep trying i guess.
So, I've been trying to fix my Netflix playback issue. I uninstalled Netflix before I started this process.
My FireTV was running 51.1.6.0 rooted, the boot loader was unlocked, I had the boot menu installed, etc.
From what I'd read, it looked like I may have installed a pre-rooted version some time back that had an issue with Netflix, that was corrected in the "updated" version of that release. I didn't have Netflix at the time, so I didn't know I had a problem. So, I loaded the 51.1.4.0 rooted+updated and 51.1.6.1-rooted onto my FIreTV /sdcard/ directory, ran the md5sum to make sure the files were transferred right, then loaded 51.1.4.0 via recovery. After it rebooted, things weren't quite right. I couldn't install the Netflix app (when I selected the icon, I think the screen flashed and it was back to the same screen). PlutoTV would load, but Mediaah complained. On the Apps section, it said something to the effect of "Your apps will show up here soon". I could still launch Kodi and it seemed to work fine.
Anyhow, I entered recovery mode via ADB and installed the 51.1.6.1. Now my FireTV is sitting at the animated FireTV screen. It no longer gives me the boot menu as it boots up.
What did I do wrong? Did I need to do some more steps while running 51.1.4.0 before loading 51.1.6.1? Did I need to install another version between 51.1.4.0 and 51.1.6.1?
So far, I've not been able to make any headway recovering. I can't connect to it via ADB to enter recovery mode. I don't have a USB PC keyboard to try the ALT-I-PrintScreen trick on boot. I've just ordered a USB A to USB A cable to try the fast boot recovery, but if loading 51.1.4.0 has broken by bootloader unlock, then that probably won't work either.
Installing 51.1.4.0 wipes out the boot menu. Since 51.1.6.1 requires the boot menu, you soft-bricked when you installed 51.1.6.1 without having a funcitoning boot menu.
The good news is it's a simple fix. You should be able to get into recovery using the ALT+i+PrintScreen if you can get a hold of a USB keyboard. The A-to-A USB cable will also get you back to working order if you prefer to go that route.
Just follow the instructions carefully here: http://www.aftvnews.com/how-to-unbrick-and-prevent-bricking-an-amazon-fire-tv/
EDIT: I've added a warning to my ROM page, next to the 51.1.4.0 download, to help people avoid what you unknowingly did. If you used my ROM page, sorry the warning wasn't there earlier. Please feel free to PM or email me if you need any additional help recovering.
Thank you for the explanation. I thought it was something like that.
Is there any specific time during the boot process that I should be trying to hit ALT-i-Print Screen?
Taige said:
Thank you for the explanation. I thought it was something like that.
Is there any specific time during the boot process that I should be trying to hit ALT-i-Print Screen?
Click to expand...
Click to collapse
There isn't really any indicator. Just continue to press it repeatedly through the whole boot process. I don't mean hold it down the whole time, but rather, press, release, then repeat. If you can't get it to work, just follow the steps under the "Repair Recovery with Fastboot Mode" section of my guide. With that, there's no guess work, and you'll get into recovery immediately.
Got it with the USB keyboard!
But only after I read this link (http://www.aftvnews.com/how-to-unbr...ry-mode-and-factory-reset-the-amazon-fire-tv/)...
Before reading that page, I assumed I just had to hit it at the right point in the boot process, like entering a computers BIOS or something. But that page explained what the system did when you hit ALT-i-PrintScreen, so I knew not to give up.
I have a USB A-to-A cable that will be here tomorrow that I don't need now, but it was cheap insurance.
Thanks again! Your web site is a very valuable resource! Not to take anything away from all the hard work of the guys who frequent these forums, but having everything curated in one place, with instructions for mere-mortals is great.