Have you ever wondered how you Note 2 would run with a nice clean version of aosp? While there are many n2 roms that claim to be aosp very few really are. Most are based off of cm (cyanogenmod) which is not pure aosp. What make Evervolv different? It has been based on pure aosp (google source) and is a nice no frills rom which saves battery and makes it super stable. Give it a run and see what aosp is all about.
Now I am not part of Evervolv and they do not support the Note 2 so if you have any problems please post them here for me to address. If you like what Evervolv has done then please go to them and thank them since they did all the hard work.
Evervolv Github: https://github.com/Evervolv
Evervolv Gerrit: http://review.evervolv.com/
Evervolv website: http://www.evervolv.com/
(New Site is up Check it out)
Twitter: https://www.twitter.com/wbellavance
IRC: #evervolv
Kernel source: https://github.com/CyanogenMod/android_kernel_samsung_smdk4412
Known Issues:
Screen off reboot -- To prevent this just turn on wifi once and after that you can run wifi off/on and wont have any issue
Keyboard no showing -- Open settings go to languages and input.. current keyboard.. and enable hardware keyboard option
GPS -- The gps sensor does not work.. You can flash the gps fix in the 3rd post to gain gps
Downloads
Extras
Shift-lollipop kernel (thanks to Brett Rogers)
Kernel source -- https://github.com/rogersb11/Shift
https://www.androidfilehost.com/?fid=95857557620392493
GPS Fix
https://www.androidfilehost.com/?fid=95864024717069228
I tried twice, but installation fails. The error message says something about not being able to update binary. I wish i would've wrote it down, but i restored my backup right away. I can try flashing it again when i get home later tonight.
jdee323 said:
I tried twice, but installation fails. The error message says something about not being able to update binary. I wish i would've wrote it down, but i restored my backup right away. I can try flashing it again when i get home later tonight.
Click to expand...
Click to collapse
That is your recovery causing the issue. Which recovery are you using and what version?
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
That is your recovery causing the issue. Which recovery are you using and what version?
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've been using the latest twrp for a while now. I'll try phillz and see how it goes. Thanks
Can you post the gapps people
spyderkoz said:
Can you post the gapps people
Click to expand...
Click to collapse
Once you install evervolv go into settings and find evervolvs updater. You will fond gapps inside it or you can use any 5.x gapps.
Sent from my XT1045 using XDA Free mobile app
Found a solution.
Drayspencer said:
Yes I got that same message while trying to flash with TWRP 2.8.0.0 I found here. ( https://goo.im/devs/OpenRecovery/l900/ )
I tried TWRP with no success and went back to my usual philz_touch_6.07.9-l900 which is what I always use. It gives me the Android boot screen and then loops back to the Samsung screen. I can't even get in to get a logcat because in C:adb/adb_devices it shows no devices while in that loop. I don't know how far back the logcat goes in the system but I did a test log once I restored the Community ROM to see if that helps. I have no problem with other 5.x.x ROMs so I am assuming that's not it.
Click to expand...
Click to collapse
It worked for me with philz 6.01.2
Running smooth as silk no problems, Thanks JLM ..... flashed with Philz 6.07.9 :good:
Found a solution.
Does netflix work on this rom?
Loaded this up yesterday. Been running OK, i have the shift kernel installed. Today it had been lagging really bad and my settings in stweaks aren't sticking. And the attached picture what the heck is that star and why is it showing my location on when its turned off.
Edit now it keeps for closing gallery to load the pic
hondafreak513 said:
Loaded this up yesterday. Been running OK, i have the shift kernel installed. Today it had been lagging really bad and my settings in stweaks aren't sticking. And the attached picture what the heck is that star and why is it showing my location on when its turned off.
Edit now it keeps for closing gallery to load the pic
Click to expand...
Click to collapse
What picture?
Sent from my XT1045 using XDA Premium 4 mobile app
jlmancuso said:
What picture?
Sent from my XT1045 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Lol for some reason this ROM or tapatalk keeps fcing my gallery when i tried to upload it
hondafreak513 said:
Lol for some reason this ROM or tapatalk keeps fcing my gallery when i tried to upload it
Click to expand...
Click to collapse
Try to get me a logcat of it so i can see what is going on.
Sent from my XT1045 using XDA Premium 4 mobile app
https://www.dropbox.com/s/a7ivsbj84jk6scj/2015-01-02-05-12-57.txt?dl=0
very nice rom, I do have one issue. I seem to have lost root some how. How do I get root back?
Would anyone be able to share the GPS fix on drop box or another mirror? None of the mirrors on the original link have been working for me for the last 4 days.
Related
Here you can ask all the questions regarding this rom. Please use the Development thread for development related chat, THANKS
VIBRATION FIX: Reboot into recovery, Wipe Cache and Dalvik Cache, Then Flash the attached ZIP in recovery
Flash attached sdcardfix.zip to fix the sdcard issue. This will remove th 14 toggles for now. That is what's causing the issue.. Once I figure out what I messed up on the toggles I will post an update​
Su fixed? Font Fixed?
In this?
Sent from my SGH-T989 using xda premium
ElectricBubble said:
Su fixed? Font Fixed?
In this?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
SU is fixed, never had a problem with font.. what's wrong with it?
I have problems with words with friends on all ics roms. It is very laggy and almost un payable. Anyone else?
Sent from my SGH-T989 using xda premium
IDK if you used my CWM package as your base, but the font's weren't symlinked in the updater script so sammy keyboard and facebook are broken.
Third post in your dev topic I posted an attachment with the patch
Cheers
yaldak
yaldak said:
IDK if you used my CWM package as your base, but the font's weren't symlinked in the updater script so sammy keyboard and facebook are broken.
Third post in your dev topic I posted an attachment with the patch
Cheers
yaldak
Click to expand...
Click to collapse
Nope, used the base I downloaded on Rootz...
Ok
Not an issue then
I'm not getting any vibration at all. No haptic feedback or anything. Any idea why?
I will have to check it out.. Will update tomorrow on what I find
Racing19969 said:
I will have to check it out.. Will update tomorrow on what I find
Click to expand...
Click to collapse
Guess it's time to go back to Yaldak's UCLD2. Vibration is a huge necessity for me.
KonstantinKeller said:
Guess it's time to go back to Yaldak's UCLD2. Vibration is a huge necessity for me.
Click to expand...
Click to collapse
In the sound settings, all tick boxes are checked for vibration and the intensity turned up. I only ask because I never noticed these settings in GB (unless I totally missed it), and you just never know.
Posted a zip to flash new kernel in OP and Dev Thread to fix Vibration issue..
what sthe real different between kernels? Which has better battery life RACing?
Racing19969, you're a god damn hero. When I get paid I'll send you some beer money.
Would this kernel work on the Skyrocket R2 ROM to fix the vibration intensity?
Does lock screen weather work on this ROM? Netflix?
Racing19969 said:
Posted a zip to flash new kernel in OP and Dev Thread to fix Vibration issue..
Click to expand...
Click to collapse
So is this going to have the font issue with the new kernal? Or was that just yaldaks and I don't need the fix?
Sent from my SGH-T989 using xda premium
So... other than the vibrate fix, does anyone has a convincing reason to flash the other kernal? I could give 2 poops about vibrate, I'm in love with this new leak.
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Had the vibration issue, with is big for me, and it wasn't reading my SD card.
Also, I ended up going back to the Skyrocket port by Racer for the custom stock theme that I was able to install. When I tried flashing the rom I got a blank screen of death, so I reverted back.
I can live without Netflix and a camcorder for now. I'm in love with the Skyrocket port Rom, it's been amazing for me thus far. If it ain't broke don't fix it, though I do want to eventually upgrade.
I deff like this kernel better than the previous thanx for the fix everything seems to be working
Sent from my SAMSUNG-SGH-T989 using xda premium
Racing19969 said:
Posted a zip to flash new kernel in OP and Dev Thread to fix Vibration issue..
Click to expand...
Click to collapse
Hi Racing, I tried to flash the kernel twice now but keep keep getting an installation aborted error message. I did wipe both caches as well
Sent from my Fargin Tab
glensta said:
Hi Racing, I tried to flash the kernel twice now but keep keep getting an installation aborted error message. I did wipe both caches as well
Sent from my Fargin Tab
Click to expand...
Click to collapse
Use easy Kernel flasher
Does anyone know how to port over Google Now on the the GS2 running rooted stock ICS???
Yes, there's a zip file in the Themes and Apps section.
incredible315 said:
Does anyone know how to port over Google Now on the the GS2 running rooted stock ICS???
Click to expand...
Click to collapse
I guess going to themes and apps or just searching w/ google was too much... hahahaha
Hey don't forget to tell Gatorstew thanx! LOL :laugh:
Oh yea and GNow works lovely :good:
gatorstew said:
Yes, there's a zip file in the Themes and Apps section.
Click to expand...
Click to collapse
Yea i tried that one and it just continues to force closed, i spoke about the problem in the thread but got no reply.
Sent from my SGH-T989 using xda app-developers app
Here are the instructions:
http://forum.xda-developers.com/showpost.php?p=29756226&postcount=2856
Use Mikeyxda's version 6. I'm having no issues with it on my phone.
incredible315 said:
Yea i tried that one and it just continues to force closed, i spoke about the problem in the thread but got no reply.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Ok now you got to break it down for us, which one did you try - what link did you use - did you clear cache before flashing - you know all the particulars. Honestly its download flash profit
The link two posts above me is the latest. Zero issues its version 6 and the one in the themes in apps section is version 2
Sent from my SGH-T989 using xda app-developers app
v6 works good so far
shaunlit said:
v6 works good so far
Click to expand...
Click to collapse
+1
Sent from the pink Unicorn from the Darkside.
Running CM 9 Stable build, TDJ kernel 6.2. Works like a champ! I was hoping it'd ACTUALLY show me the scores for the teams I ask about, but I can't argue with how accurate it is when I speak.
I hit "search" to bring up the GNow app, not double tapping home.
i dont understand how to intsall it
guitarmon691 said:
i dont understand how to intsall it
Click to expand...
Click to collapse
ok there are different ways to install it all clearly laid out for you in the thread. I sugges take your time and read carefully. if you have rooted your phone then I dont see how this can be an issue. Honestly there are only a few ways to install anything android related:
Flash it - placing zip on sd card, booting into recovery and flash
install it - placing apk on sd card and clicking on it
Push it - done by using adb codes
Quite sure on that page its nothing more than flashing thru recovery since I have already done it.
Here is my initial attempt to upload a slightly updated version of CM10 for the HTC EVO 4G. This is based on JMZs version and updated to the latest CM10.
CyanogenMod 10 is a free, community built distribution of Android 4.1.2 (Jellybean) which greatly extends the capabilities of your phone.
This is an Unofficial release.
Rom Installation:
1. Download ROM Updated Mar 12, 2013
2. Download Gapps
3. Download A2SD
4. Wipe Data, Cache
5. Flash the ROM
6. Flash GApps
7. Reboot into the system (first boot will take several minutes)
A2SD Installation:
You MUST have an EXT2, EXT3, or EXT4 partition on your sdcard first
1. Flash Rom
2. Flash Gapps
3. Flash Apps2SD
4. Enjoy your new ROM
MazWoz SBC Kernel - If anyone wants SBC
Most things are working but I know the following are broken.
-Video playback may cause a hot reboot
-Camcorder
-4G
-FFC
Additionally, making a phonecall will cause the cpu to max at 614Mhz usually and I recommend going in to performance and bumping it up to 998.
I personally use Boot Manager in the play store to boot to CM7 whenever I need any of these features.
BBQLog Changelog
or
Changelog
Thanks:
CyanogenMod Team their GITHUB - for the basic features
Evervolv their GITHUB - for their device folder and continued support
JMZTaylor his GITHUB - for the inital port
MazWoz his GITHUB - for his work on the kernel and helping me work out some bugs.
My GITHUB
I will be posting CM10.1 once/if I get it working.
My GITHUB for CM10.1 with the understanding that it will not work at this time.
Sweet! More CM10! how stable is it? Any random reboots aside from playback?
Sent from my SPH-L710 using xda premium
Thanks dude ima try this out
Sent from my PC36100 using xda app-developers app
Its pretty stable. Playback is the only thing I get hot reboots on but let me know if you have other problems. It does take it a little while to settle in after booting but that is true for any ROM. I'll post updates as I build them.
Look good man!! Let me know if you need any help and I'll be more the willing dude!!
Oh, rated your thread 5 stars before the trolls start their crap again! :good:
Also if this ROM takes off, it may be in your best interest to find a host site, such as Dev-host or goo.im. dropbox will suspend your account if it gets hammered.
Sent from my SPH-L710 using xda premium
Thanks Mazda, and I'm just waiting till my goo account gets approved and then I will move everything over to their servers.
First page. Sweet. I'll try this one while I wait for 50. lol. Looks great, man!
def will try this
Thanks for this. Checking out now. Thumbs up pal.
Sent from my X10 using xda premium
On the bright side, I never use what never works, so I'm going to try this one out. I digs me some CM10. Thanks.
Sent from my PC36100 using xda premium
boot loops for me even tried just flashing the rom alone still the same outcome
bnasty06 said:
boot loops for me even tried just flashing the rom alone still the same outcome
Click to expand...
Click to collapse
Same here, tried a couple times & each time would get to the boot animation, look good for about 5 seconds then reboot itself. Tried flashing without the a2sd, same exact thing, boot loop city.
Sent from my GT-P7310 using Xparent Blue Tapatalk 2
I've updated the file. Does it actually bootloop or do you get one reboot and then it work? Sometimes the first boot will reboot and then work fine.
Kasual52e said:
I've updated the file. Does it actually bootloop or do you get one reboot and then it work? Sometimes the first boot will reboot and then work fine.
Click to expand...
Click to collapse
boot loop every time
bnasty06 said:
boot loop every time
Click to expand...
Click to collapse
Can you post a logcat?
Try flashing thishttp://db.tt/i2mvtlhb after the Rom and let me know if it works for you
Kasual52e said:
Can you post a logcat?
Click to expand...
Click to collapse
to be honest I'm not sure how to, never have had to
I've updated the file again. Try it and let me know if you still have problems with it.
http://dl.dropbox.com/u/46797032/cm-10-20130114-UNOFFICIAL-supersonic.zip
Kasual52e said:
I've updated the file again. Try it and let me know if you still have problems with it.
http://dl.dropbox.com/u/46797032/cm-10-20130114-UNOFFICIAL-supersonic.zip
Click to expand...
Click to collapse
thanks updated file is working great
NOTE: This is pre-nightly status. It is very likely things will go wrong. Use at your own risk. I am not responsible for damage to your device.
Click to expand...
Click to collapse
So far the build boots and works for me.
Google Experience Launcher and transparent notification bar are included with PA gapps.
If you have problems with sdcard mount r/w,flash the hotfix.
Download:
# 12 December https://drive.google.com/file/d/0BwOXRHKU8X8pMVhBZktFUExjcGs/edit?usp=sharing
# 14 November http://storagecow.eu/Xda/Users/AlexanderStoian/CM/e980/cm-11-20131114-UNOFFICIAL-e980.zip
# 19 November https://drive.google.com/file/d/0BwOXRHKU8X8pODBnYzVwX2Zmc/edit?usp=sharing
GApps:
Use PA-GApps: http://123rom.com/download.1254
Kernel source
REMEMBER: FLASH AT YOUR OWN RISK
Changelog:
# 12 December
- All bugs are sorted out
# 19 November
- Upstream changes
# 14 November
- Fixed SDCard
# 13 November
- Initial release
Click to expand...
Click to collapse
Bugs
- 13 MP camera with Kitkat camera(works with other camera apps)
Thanks @StarkV5 for flashable zip,ALL MY DONATORS,all my testers @mrfeuss,CM Team @madmack and @Shelnutt2
You my good sir, are the ****... I'm at work now but I'll definitely give it a run when I get home.
Sent from my LG-E980 using Tapatalk
So I flashed the rom, and all of the additional zips (modem, and pa gapps) and everything seems to be working perfectly, except for the SD card, which it currently is not reading for some reason. Outside of that everything else seems to be working and I'll add any additional comments if something isn't working.
Just to clarify the SD card bug is external right? Just wanna make sure I can restore thanx again oblikas I never doubted u u got skills man lol
Sent from my LG-E980 using Tapatalk
jprosek said:
Just to clarify the SD card bug is external right? Just wanna make sure I can restore thanx again oblikas I never doubted u u got skills man lol
Sent from my LG-E980 using Tapatalk
Click to expand...
Click to collapse
Yes,external
Downloading now .. Will update how is ROM performed .. Thanks Oblikas.. You are the man..:thumbup::thumbup::thumbup:
Sent from my LG-E980 using xda app-developers app
I can confirm that the external SD is inaccessible from the ROM. Rear facing camera is maxing out at 8 MP. Focal crashes after taking a photo with the front camera, stock camera app works fine. Overall very smooth, though.
Excellent work, as always @oblikas!
Do you need to flash madmacks modem?
@oblikas thanks again. You and the other devs keep this device going.
great going #Oblikas
Thanks!
Here, have a latte: 32L1172158014560J :highfive:
Hi,
Any screenshots will be of help. How is the rom performing. Is it stable enough to use as a daily driver until the nightly come out.
kailash
Isamu_Dyson said:
Thanks!
Here, have a latte: 32L1172158014560J :highfive:
Click to expand...
Click to collapse
Thanks a lot man ! Much appreciated!
kailashnj said:
Any screenshots will be of help. How is the rom performing. Is it stable enough to use as a daily driver until the nightly come out.
Click to expand...
Click to collapse
Screenshots won't tell you very much. Kit Kat looks very much like Jelly Bean. White status bar icons on a transparent status bar is about as different as it looks. There are plenty of screenshots of the new Google Experience Launcher for you to check out.
As far as stability goes, it's a little early to say. I've only been running it a few hours. There are a few little issues that @oblikas is aware of (external SD, Camera capped at 8MP) but otherwise it's very functional. It's extremely smooth and boots really quickly.
EDIT:
WiFi Hotspot is working-very well I might add. Using it to download the OTA for my N7.
This does not intsall on E988. It gives error during installation in recovery.
veenab said:
This does not intsall on E988. It gives error during installation in recovery.
Click to expand...
Click to collapse
Because I made it for e980.
You take the risk for a brick or something like that.
Open updater script with notepad++ and remove assert lines.
ROM is fast and stable.. So far running for 5 hours I have only 2 FC playstore and gallery apps.. Way to go Oblikas..
Sent from my LG-E980 using xda app-developers app
Been running this for 10+ hours with only problem being exterior sd card. Better battery stats won't work for me either but everything else is running fine. No lte but 3g works flawlessly. This is a great first build and everyone should be impressed. Thanks oblikas, glad u are here with us.
Sent from my LG-E980 using xda app-developers app
Going to try this tonight. Just wondering, did anyone successfully run this on a non AT&T model? Mine's the Israeli E989, But i'll do a nandroid and try anyway.
Tried a few times, but was unable to install this on my E980. Using TWRP for our devices, I get the error messages "Error executing updater binary in zip..." & "Error flashing zip..." Was previously using madmack's CM 10.2, had no problems flashing back to it. Any idea what might have caused this?
I first would like to say that all credit for this ROM and everything in it belongs to the creator, Mahdi786! He put in all the long hours, days, weeks into this project of his, he deserves all the credit and all the thanks for this ROM! So please lets give a huge thank you to Mahdi786!
THANK YOU!![/CENTER]
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards
*/
Installation instructions
Installing Mahdi-Rom for the first time, or coming from another ROM:
- Make sure you're running Philz 6.07.9 use of any other recovery will not be supported! http://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900
- Copy GApps and ROM ZIP to your SDCard
- Boot into Recovery
- Format following these instructions http://forum.xda-developers.com/showthread.php?t=2648855
- Follow option B instruction set
- Flash Mahdi-Rom zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore system data using Titanium Backup!
-InCallUI FC - How to fix this: Open Phone, go to settings, turn reverse lookup off then back on, no more FC
Upgrading from another 4.4 Rom:
- Copy the ROM ZIP to your SDCard
- Boot into Recovery (Please use Philz)
- Choose factory reset then clean to install new rom
- Flash the ROM zip from SDCard
- Reboot
Source
-HERE
Change logs
3-7-13
First build
Looks like everything works
Downloads
3-7-13 build
http://www.androidfilehost.com/?fid=23329332407576813 -- Android File Host
http://goo.im/devs/jlmancuso/sprint-note-2/mahdi//mahdi_l900-ota-eng.jlmancuso.zip -- Goo.im
New builds will be here http://android.aokforums.com/samsung-note-2-roms-vf4.html
Although I will keep helping with those here on xda
Features
Will fill in Later
Screen Shots
Preview video
Will work on this tonight and post ASAP
Issues
GPS
Superuser
Themes
Will work on these tomorrow
jlmancuso said:
Not sure what I will do here yet but got it just in case.
Click to expand...
Click to collapse
Great News !!!
louforgiveno said:
Great News !!!
Click to expand...
Click to collapse
You still have your note 2 or did you trade it in when you went to T-mobile?
jlmancuso said:
You still have your note 2 or did you trade it in when you went to T-mobile?
Click to expand...
Click to collapse
Yeah still got it sitting here.......might let the kids duel for it
louforgiveno said:
Yeah still got it sitting here.......might let the kids duel for it
Click to expand...
Click to collapse
Well you might want to hang on to it for a few days and try out the new builds I have going. With some help from sleshepic I am now on a roll and pumping out a few new things. This one (mahdi) is fully working and I am building a fully working beanstalk atm. Then on to Chaos and then baked KK.
Also unlike most 4.4 KK roms this one (mahdi) has a much louder speaker volume both external and on calls. I am trying to find the exactly what the modifications are so I can add them into all my builds. That way users wont need any add-ons to boost the volume.
Jlmancuso I found the ROM but which gapps should I use? Just want to make sure I use the right one
Sent from my SPH-L900 using Tapatalk
ceabbott2 said:
Jlmancuso I found the ROM but which gapps should I use? Just want to make sure I got the right one
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
I will link a few a 4.4 core gapps along with slims gapps. Although any current 4.4 version should be fine.
Does this one has BT working for music call and car?
I don't have that Philz version which may break some ROM if not follow new chats from Philz.
Sent from my SPH-L900 using Tapatalk
huytrang90 said:
Does this one has BT working for music call and car?
I don't have that Philz version which may break some ROM if not follow new chats from Philz.
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Dont have any bluetooth besides another phone so I am not sure. It will do beam which uses nfc and bluetooth transfer so that is all I can say. I do have another user testing those features atm but could use another.
I am posting link in OP to philz goo.im downloads. It will take you directly to our device so there will be no confusion in that area. All his builds will work with 4.4 but only 6.07.09 will work with all android versions.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900
I'm assuming this is AOSP since people are mentioning GAPPS packages, but I've never heard of this ROM, what's it's unique features compared to let's say AOKP, PACman, Carbon, etc? Just curious
Sent from my Rooted, Suited, and Booted Sprint Galaxy Note II know dat!
Are the cricket setting already set or no
Sent from my SPH-L900 using Tapatalk
mrwright83 said:
Are the cricket setting already set or no
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Not in this build but I will do a cricket version at a later date. Just wanted to get any big bugs taken care of before i did any changes.
Sent from my SPH-L900 using XDA Premium 4 mobile app
This ROM is nice and fast I've been rocking with it all afternoon my only issue is the camera doesn't work, I've loaded a couple of camera apps from the play store and they don't work either. Bummer.
qmel777 said:
This ROM is nice and fast I've been rocking with it all afternoon my only issue is the camera doesn't work, I've loaded a couple of camera apps from the play store and they don't work either. Bummer.
Click to expand...
Click to collapse
Something in the source is broken. Tomorrow I will be digging into this and beanstalk. The thing is when working for current sources they are not always 100% usable. Until a stable release is made everything is like a nightly. Things get changed and some changes are not complete. I just have to mix and match different sources or fix the code myself. Since I am just a novice it takes me longer.
You might want to try my ose build. It looks to be fairly bug free so far.
Sent from my SPH-L900 using XDA Premium 4 mobile app
If you had superuser issues follow these directions.
http://forum.xda-developers.com/showthread.php?p=51029078
Sent from my SPH-L900 using XDA Premium 4 mobile app
Will be updating this to a working superuser tonight or tomorrow. Doing chaos right now so hopefully a new op will be up tonight for it.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Will be updating this to a working superuser tonight or tomorrow. Doing chaos right now so hopefully a new op will be up tonight for it.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you, you said the in call volume is loader than the other non tw roms waiting on stable version and will give a go use phone for business and home. Keep up the good work ?
Sent from my Nexus 7 using Tapatalk