Develop Bugs

Official CyanogenMod support

Just to let everyone know, the Note 2 LTE (including T-Mobile) will be getting official CyanogenMod 10.1 builds!
Here's the link where the builds will be available: http://get.cm/?device=t0lte
And here's the thread in AT&T forum: http://forum.xda-developers.com/showthread.php?t=2105917

Nice! Thanks for the heads up dude.

This solidifies my belief that the Note 2 is undoubtedly the best phone in the world.

Wow just flashed this and my phone will not boot at all. FML...
Fixed. :thumbup:
Sent from my T989 using xda premium

The only reason I've ever used CyanogenMod on my previous device was because of software issues. To date, I can see no reason for even a custom ROM on my Note II let alone a beta ROM.

Hoezack said:
Wow just flashed this and my phone will not boot at all. FML...
Sent from my T989 using xda premium
Click to expand...
Click to collapse
Did you try this?
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
Click to expand...
Click to collapse
AFTER flashing?

Downloaded and tried to flash via CW three different times and installation aborted each time. I wiped data davlik and cache so I have no clue wtf is wrong but I need that 4.2!!!

I really didn't mean for this thread to become a support thread. If you guys are having problems flashing or booting, you didn't follow the instructions. Re-read all the information and try again following the instructions exactly.

xak944 said:
I really didn't mean for this thread to become a support thread. If you guys are having problems flashing or booting, you didn't follow the instructions. Re-read all the information and try again following the instructions exactly.
Click to expand...
Click to collapse
Been rooting and flashing since the G1 and never had installation abort in the middke of a flash but once. I read the directions and did exactly as posted four times now. Idk what the issue is. I am currently on Jedi X rom. Maybe I should flash stock then retry it?

SinisterSincere said:
Been rooting and flashing since the G1 and never had installation abort in the middke of a flash but once. I read the directions and did exactly as posted four times now. Idk what the issue is. I am currently on Jedi X rom. Maybe I should flash stock then retry it?
Click to expand...
Click to collapse
I'm guessing you didn't follow this step:
madmack said:
- Flash the latest official ClockworkMod-Recovery
Click to expand...
Click to collapse

It's been confirmed working with TWRP

xak944 said:
I'm guessing you didn't follow this step:
Click to expand...
Click to collapse
I know you said you didn't want this thread to turn into a support thread but how do you flash the latest recovery? Through odin or fastboot?
thanks

You don't need cwm I flashed perfectly fine with twrp and have no problems at all haven't tried Bluetooth since I don't use it but it States that it's a bug anyway.
Fandroid93 download goomanager and you can install the latest twrp from there. Or download rommanager and should be able to get cwm from there.

skater4690 said:
You don't need cwm I flashed perfectly fine with twrp and have no problems at all haven't tried Bluetooth since I don't use it but it States that it's a bug anyway.
Fandroid93 download goomanager and you can install the latest twrp from there. Or download rommanager and should be able to get cwm from there.
Click to expand...
Click to collapse
Thanks, I hadn't thought about that lol.

SinisterSincere said:
Downloaded and tried to flash via CW three different times and installation aborted each time. I wiped data davlik and cache so I have no clue wtf is wrong but I need that 4.2!!!
Click to expand...
Click to collapse
What version phone do you have? Some Canadian versions require the updater script to be modified to remove the version checks, everything flashes fine after that and works as normal but they forgot to add the version numbers in the check.
Sent from my GT-N7105 using Tapatalk 2

xak944 said:
I'm guessing you didn't follow this step:
Click to expand...
Click to collapse
Nope have the latest cwm but heard alot of people using twrp had luck so gonna flash that.
---------- Post added at 01:12 AM ---------- Previous post was at 01:06 AM ----------
_Dennis_ said:
What version phone do you have? Some Canadian versions require the updater script to be modified to remove the version checks, everything flashes fine after that and works as normal but they forgot to add the version numbers in the check.
Sent from my GT-N7105 using Tapatalk 2
Click to expand...
Click to collapse
TMobile version US

SinisterSincere said:
TMobile version US
Click to expand...
Click to collapse
Bad downloads? Try from your computer.
Sent from my GT-N7105 using Tapatalk 2

I've been a long time cm fan until 4.1 TW. That being said I had to try the official nightly and I gotta say it's real cool. 4.2.1 changes with com's twist is very nice. Dare I say it might even be snappier than stock
Sent from my GIANT internet thingy.

This rom does work with T-mobile note 2 right? Just making sure.

pwner325 said:
This rom does work with T-mobile note 2 right? Just making sure.
Click to expand...
Click to collapse
It does... original development thread has cm 10.1 nighties... few days in now... BT and a few other minor kinks
Sent from my SGH-T889 using xda app-developers app

PA 3.99 Not Working on TMo Note 2 Help!

I am able to flash the rom successfully using CWM Recovery, but when the Rom starts up, it does not recognize any network or mobile data. I have flashed back to stock TW Rom, and it all works fine. I would love to give this rom a shot, but I would rather be able to use my phone. Please let me know how to get service and mobile data using this rom on my TMo SGH-T889 (Galaxy Note II). Thanks!

Nolan22 said:
I am able to flash the rom successfully using CWM Recovery, but when the Rom starts up, it does not recognize any network or mobile data. I have flashed back to stock TW Rom, and it all works fine. I would love to give this rom a shot, but I would rather be able to use my phone. Please let me know how to get service and mobile data using this rom on my TMo SGH-T889 (Galaxy Note II). Thanks!
Click to expand...
Click to collapse
Switch to TWRP recovery

Anu6is said:
Switch to TWRP recovery
Click to expand...
Click to collapse
Thanks for the reply! Why will TWRP allow me to use paranoid android?

Nolan22 said:
Thanks for the reply! Why will TWRP allow me to use paranoid android?
Click to expand...
Click to collapse
As far as i've seen from other posts, some versions of CWM cause issues with the baseband when flashing ROMs
TWRP does not have this issue.

Anu6is said:
As far as i've seen from other posts, some versions of CWM cause issues with the baseband when flashing ROMs
TWRP does not have this issue.
Click to expand...
Click to collapse
After installing TWRP on my TMo Note 2, I flashed PA 3.99 + GApps and it seems like everything is working fine. I have data and phone connectivity!
Since Paranoid Android was not working with CWM, does that mean that there might be certain ROMs that will not work with TWRP?

Nolan22 said:
After installing TWRP on my TMo Note 2, I flashed PA 3.99 + GApps and it seems like everything is working fine. I have data and phone connectivity!
Since Paranoid Android was not working with CWM, does that mean that there might be certain ROMs that will not work with TWRP?
Click to expand...
Click to collapse
I've not heard of any problems with TWRP (that does not mean they don't exist), also the issue with CWM only seemed to appear after a certain update (can't recall the number). Older version work without issue.

So I guess I spoke a little too soon. I was able to get data and cell connectivity, but it only lasted a couple hours and then disconnected. Any idea what is happening?
Sent from my SGH-T889 using xda app-developers app

Nolan22 said:
So I guess I spoke a little too soon. I was able to get data and cell connectivity, but it only lasted a couple hours and then disconnected. Any idea what is happening?
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Try the note2 thread...it could be a device specific issue.

Unable to flash anything

Hi Guys This is not new to me, but what I missing,I have a galaxy s3 from at&t, I flashed to many roms before,but now I try to go to 4.4 and I can't I get error 7 and msd 5 no found android with a red triangle in the chest ,even the, I when back to stock 4.11 rooted and install recovery. What I done till now : the friendly guide for the error 7, toggle the the restriction in the recovery options still the same problem, even the OTA update from At& can't be installed. Is driving me nuts any Help ? thanks.:good:

Are you running the latest recovery? 4.4 ROMs require the latest TWRP or CWM.

audit13 said:
Are you running the latest recovery? 4.4 ROMs require the latest TWRP or CWM.
Click to expand...
Click to collapse
Sorry to take to long to get back ,You where right, I believed that I had the last ,now is working fine thanks a lot I did flash to 4.4 ,
now no WiFi, I'm working on it

chi3sol said:
Sorry to take to long to get back ,You where right, I believed that I had the last ,now is working fine thanks a lot I did flash to 4.4 ,
now no WiFi, I'm working on it
Click to expand...
Click to collapse
Could it be the modem that you're running? Did Wifi work on previous ROMs?

I got it working, but start geting froze and buch of isues, did flash it again and then after flash the google app the screen turn black and the phone won't boot , I did went back to stock everything is fine
Is any way to check if some aystem file is mising
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

What ROM are you trying to flash?

I fix it thanks
Sent from my GT-P3110 using xda app-developers app

audit13 Thanks a lot

I am Running a 4.1 What do I need to do to update to 4.4

OK, so I have been rooted almost a year, and have flashed several roms. I am currently on 4.1 of I believe Hybrid's rom. I believe I have had a 4.3 at one time but my last flash, whenever I started trying to flash a 4.4 version I started running into problems along the way. Is there anything special I need to do to upgrade to 4.4? Like besides flashing the rom, is there anything else I need to flash? Anyone have any recommendations?
Thanks!
Brandon.

wwe9112 said:
OK, so I have been rooted almost a year, and have flashed several roms. I am currently on 4.1 of I believe Hybrid's rom. I believe I have had a 4.3 at one time but my last flash, whenever I started trying to flash a 4.4 version I started running into problems along the way. Is there anything special I need to do to upgrade to 4.4? Like besides flashing the rom, is there anything else I need to flash? Anyone have any recommendations?
Thanks!
Brandon.
Click to expand...
Click to collapse
I have the same question here.... I just rooted my phone on 4.3 jelly bean stock but if one day a stock 4.4 is comming out do I need to unroot my phone to make the update ?

carlosQC said:
I have the same question here.... I just rooted my phone on 4.3 jelly bean stock but if one day a stock 4.4 is comming out do I need to unroot my phone to make the update ?
Click to expand...
Click to collapse
No one still has answered lol. I tried to flash a few different 4.3's and they kept failing. I'm using TWRP or whatever it's called 2.6.0.0 not sure what that's about. I had to flash an older rom I had on my computer to get it to allow my phone to work.

I prefer using CWM or Philz Touch which is based on CWM rather than TWRP. I tried TWRP with a few ROMs but they always failed to install. Once I switched to CWM, they installed without issue.You can flash the tar version of Philz using Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
To run 4.4.2 ROMs, you should update to the latest 4.1.2 bootloader, load a custom recovery, boot into recovery, wipe cache, Dalvik, data, system, and flash the new ROM.

audit13 said:
I prefer using CWM or Philz Touch which is based on CWM rather than TWRP. I tried TWRP with a few ROMs but they always failed to install. Once I switched to CWM, they installed without issue.You can flash the tar version of Philz using Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
To run 4.4.2 ROMs, you should update to the latest 4.1.2 bootloader, load a custom recovery, boot into recovery, wipe cache, Dalvik, data, system, and flash the new ROM.
Click to expand...
Click to collapse
I already updated my bootloader to the one that said "you cannot downgrade from this one or you will brick your device" I think that's the latest one I'm not sure lol.
By "Boot into recovery" are you meaning boot to the recovery screen? Sorry, I like to make sure of what I am doing so I don't brick anything lol. Although in a month I'm buying the Note 3 .
How do I go about switching back to CWM? Sorry to ask and sound dumb -- which I am not I have an associates of science in computer programming but just reciently switched to Mechatronic Engineering due to higher job growth in my area. I digress.
I could probably find dozens of articles on here how to go about it, but its generally quicker if someone just posts the link to the correct one to use for my device, every time I go searching these forms, I end up on every-which phone other than mine -- I do apologize.

You need the newest version of cwm to flash anything 4.4.
If you're rooted use goomanager from play store it will install cwm or look in the stickies there are files and instructions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

audit13 said:
I prefer using CWM or Philz Touch which is based on CWM rather than TWRP. I tried TWRP with a few ROMs but they always failed to install. Once I switched to CWM, they installed without issue.You can flash the tar version of Philz using Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
To run 4.4.2 ROMs, you should update to the latest 4.1.2 bootloader, load a custom recovery, boot into recovery, wipe cache, Dalvik, data, system, and flash the new ROM.
Click to expand...
Click to collapse
If I have already TWRP installed can I install CWM over it ?

theramsey3 said:
You need the newest version of cwm to flash anything 4.4.
If you're rooted use goomanager from play store it will install cwm or look in the stickies there are files and instructions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thats how I got TWRP I believe x). And ok thanks, I'll look around.

wwe9112 said:
Thats how I got TWRP I believe x). And ok thanks, I'll look around.
Click to expand...
Click to collapse
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
IT WORKED! Thanks so much. I am using Liquid Kit-Kat lol. Thanks again!

theramsey3 said:
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It does work. I have flashed every 4.4 rom there is with that version of TWRP. Which is way better than cwm for me. :silly:

theramsey3 said:
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I have checked in the rom manager app it will install a version for galaxy s3 (metroPCS) d2mtr .... Is it going to work ??

carlosQC said:
I have checked in the rom manager app it will install a version for galaxy s3 (metroPCS) d2mtr .... Is it going to work ??
Click to expand...
Click to collapse
I just downloaded rom manager today and it installed cwm for I747 D2ATT. Perhaps you need a newer version of rom manager?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
I just downloaded rom manager today and it installed cwm for I747 D2ATT. Perhaps you need a newer version of rom manager?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Rom manager by clockworkmod ?? Why the **** it says "sorry we do not have a version for i747m " I dont understand why haha

carlosQC said:
Rom manager by clockworkmod ?? Why the **** it says "sorry we do not have a version for i747m " I dont understand why haha
Click to expand...
Click to collapse
I can not verify anything about the I747M, I have the AT&T I747. However I have heard it is safe for you guys to use the I747 D2ATT version of cwm. I am trying out the philz touch cwm that audit13 keeps suggesting, it is highly modifiable. Thus far I am happy.
Can anyone on the I747M verify it is safe to flash the D2ATT recovery? I do know for a fact you guys can use any of our roms.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
I can not verify anything about the I747M, I have the AT&T I747. However I have heard it is safe for you guys to use the I747 D2ATT version of cwm. I am trying out the philz touch cwm that audit13 keeps suggesting, it is highly modifiable. Thus far I am happy.
Can anyone on the I747M verify it is safe to flash the D2ATT recovery? I do know for a fact you guys can use any of our roms.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
yeahh maybe it will find it for your phone but not for mine .....

carlosQC said:
yeahh maybe it will find it for your phone but not for mine .....
Click to expand...
Click to collapse
Go to the general section and read the stickies here is a quote from the recovery thread I have heavily clipped it you need to read the whole thing in its original form. From what I read it is safe for your phone to use the D2ATT recovery image, I however take no responsibility for any thing that happens successful or not if you you flash it you wear it...
dstruct2k said:
So you've got your device rooted, and you want to install a custom recovery? Great! Don't just follow any guide you stumble across though, as some of the early recovery packages for the "AT&T" model were actually just copies of the custom Sprint recovery, and then you'll have all sorts of fun trying to install ROMs. ("Status 7" errors anyone? )
While this may seem difficult, it's really not. Grab a recovery image (these files end in ".img") such as ClockWork Mod (CWM) or Team Win Recovery Project (TWRP) for your device. Most ROM developers say to use CWM, but they both work equally well.
In our case, we need an image for the Samsung Galaxy S3 AT&T. Telus, Rogers, Bell, and SaskTel phones are (almost*) the exact same phone as AT&T, if you have one of these devices, you will be installing the AT&T recovery.
*NOTE: While we're on the topic, let's take a second to talk about what makes the Canadian I747M different from the AT&T I747.
The short version is... The modem. AT&T is using completely different and incompatible modem firmware in their phones when compared with the Canadian models. Rogers, Bell, Telus, and any other Canadian I747M are the same device (Samsung worked some strange voodoo and got all the Canadian carriers to agree on the same hardware!) which means that if Rogers releases a new modem firmware update, a SaskTel user could install it without issue. AT&T modem updates will not work on Canadian models, nor will Canadian updates work on AT&T phones! I've tried it. Trust me. You don't want to deal with the hassle of fixing it.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Go to the general section and read the stickies here is a quote from the recovery thread I have heavily clipped it you need to read the whole thing in its original form. From what I read it is safe for your phone...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
ok good thank you for your help !!!

carlosQC said:
ok good thank you for your help !!!
Click to expand...
Click to collapse
I edited the above post please reread it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
I edited the above post please reread it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
So in on word I can't really do anything with my rooted phone ?? When you flash a rom does it change anything to the modem file ?

W03 Slim Rom V7 - Boot Loop

I am trying to install the W03 Slim ROM V7 on my Tmobile Galaxy Note 3 through Philz recovery and I am getting stuck in a boot loop.
These are the steps I tried
1. Used Chainfire's root method to root Kitkat 4.4.2 (which was updated through kies). Used the N9005 and not N900T like the instructions asked me to
2. Flashed Philz Recovery through Odin
3. Copied the ROM and Gapps to my Phone.
4. Rebooted into recovery
5. Wiped Data/Factory reset, Install from Zip, wipe cache, wipe dalvik and reboot.
This is where I get stuck. The phone boots with these words on the top left, "Recovery not enforcing seandroid" or something along those lines and keeps booting. I booted back to Recovery and 'Re'wiped' the phone/did a factory reset, but nogo
So I downloaded the right stock firmware from Sammobile, installed through Odin and repeated the steps and still the same issue.
What am I doing wrong? I made sure I am flashing hltetmo (for TMo Note 3).

Correct me if im wrong but if you flashed the new bootloader I don't think you can go back to 4.3 roms anymore.
Sent from my SM-N900T using XDA Premium 4 mobile app

nikhilnagaraj24 said:
I am trying to install the W03 Slim ROM V7 on my Tmobile Galaxy Note 3 through Philz recovery and I am getting stuck in a boot loop.
These are the steps I tried
1. Used Chainfire's root method to root Kitkat 4.4.2 (which was updated through kies). Used the N9005 and not N900T like the instructions asked me to
2. Flashed Philz Recovery through Odin
3. Copied the ROM and Gapps to my Phone.
4. Rebooted into recovery
5. Wiped Data/Factory reset, Install from Zip, wipe cache, wipe dalvik and reboot.
This is where I get stuck. The phone boots with these words on the top left, "Recovery not enforcing seandroid" or something along those lines and keeps booting. I booted back to Recovery and 'Re'wiped' the phone/did a factory reset, but nogo
So I downloaded the right stock firmware from Sammobile, installed through Odin and repeated the steps and still the same issue.
What am I doing wrong? I made sure I am flashing hltetmo (for TMo Note 3).
Click to expand...
Click to collapse
Sounds like a Recovery issue to me. Please look one more time and make sure if you used PHILZ TOUCH that you did in fact flash 6.19.3 HLTE. and not HLTETMO. Im also using philz and no problems flashing. However before it was known that this was the version to use, I did loop at the same point when experimenting with other versoins. Also, check your MD5 and verify that it is a good download.... maybe re download just for gits and shiggles.
---------- Post added at 02:10 AM ---------- Previous post was at 02:07 AM ----------
willham said:
Correct me if im wrong but if you flashed the new bootloader I don't think you can go back to 4.3 roms anymore.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I think the new slimKat is 4.4?

willham said:
Correct me if im wrong but if you flashed the new bootloader I don't think you can go back to 4.3 roms anymore.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Had the same bootloop issue when I just tried it out. I updated my bootloader when I updated to stock KK through odin. I am assuming by 4.3 you mean the bootloader on SlimRom is the 4.3 bootloader even though it is a 4.4.2 rom?

willham said:
Correct me if im wrong but if you flashed the new bootloader I don't think you can go back to 4.3 roms anymore.
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yep.... you are correct sir. 4.3 bootloader. No el flashy 4.3 roms if you updated to 4.4 Bootloader.... im running Echoe rom. Maybe give that a try. Its an international.

Found this on page 78
Sent from my SM-N900T using XDA Premium 4 mobile app

willham said:
Found this on page 78
Sent from my SM-N900T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks everyone. It does look like it is the bootloader issue.
How do we determine if a particular ROM supports a particular bootloader version? At least the ROMs I have sort of explored and wanted to try, dont mention that anywhere. Or maybe they use some geek term to reference that but I dont understand it. How do noobs like me determine the bootloader version and compatibility of a particular ROM (before flashing and finding out the hard way)???

nikhilnagaraj24 said:
Thanks everyone. It does look like it is the bootloader issue.
How do we determine if a particular ROM supports a particular bootloader version? At least the ROMs I have sort of explored and wanted to try, dont mention that anywhere. Or maybe they use some geek term to reference that but I dont understand it. How do noobs like me determine the bootloader version and compatibility of a particular ROM (before flashing and finding out the hard way)???
Click to expand...
Click to collapse
Not really an answer to your question but I did flash pac-rom without issue. So there is one safe one.
Sent from my SM-N900T using Tapatalk

I think w03 slim rom v4 works with 4.4 bootloader
Enviado desde mi SM-N900T mediante Tapatalk