Related
Hi All,
I'm trying very hard to search for the best method/option for rooting my Samsung GT-I9192 Duos(India Version) but not found any as yet.
Not sure if I have knox or not(is there is way to find out?) but I would prefer an option which does not void my warranty. Although if I have to, I don't mind foregoing the warranty. Also, I need only root - custom kernel, etc may not be required, Thanks
Can you please suggest the best and simplest method/option(preferably one click) to root my device having the following specs:
Model: GT-I9192
Android version: 4.2.2
Baseband version: I9192DDU1BML1
Kernel version: 3.4.0-1971249
[email protected] #1
Sat Dec 14 21:59:36 KST 2013
Build number: JDQ39.I9192DDU1BML1
Appreciate any help urgently, Thanks!!!
BS
well if you don't mind sending your info to some server in china [as some ppl claim] kngo root is your safest bet and you do have knox, you can always check it by going in download mode and see it if the word knox is there, which it will be in your case , btw after using kingo root you cannot boot into recovery you have to flash a custom recovery which will also trip your knox . or you might get lucky as me on the same build as you , rooted via kingo on I9192DDU1BML1 , deleted all Knox files [ search this forms for which files to delete] , flashed cwm recovery , flashed custom kernels, and still din't trigger knox only god knows why as i can't figure it out.
there are some other methods like saferoot , just do a search on this forums.
The BML1 has knox and saferoot does not work on BML1. Kingo works fine and I have rooted the BML1 on mine using Kingo
Sent from my GT-I9192
Some how Kingo refuses to work with my device. At first with Kies installed, it would connect to my device and get stuck at 0% on the "Downloading Device Driver Software Screen". I waited hours but it was still stuck at 0%.
After reading up on their support page, I downloaded and installed the drivers manually. But now Kingo wont connect to my device.
It does initiate a connection when I plug the cable/device in USB but after a few seconds, its back to the home screen saying "Device Not Connected".
I have tried the following drivers with/without Kies 3:
SAMSUNG_USB_Driver_for_Mobile_Phones_1.5.24.0.exe
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe
What am I doing wrong? Hope there is another option/method if Kingo doesnt work out, Thanks again.
bs24 said:
Some how Kingo refuses to work with my device. At first with Kies installed, it would connect to my device and get stuck at 0% on the "Downloading Device Driver Software Screen". I waited hours but it was still stuck at 0%.
After reading up on their support page, I downloaded and installed the drivers manually. But now Kingo wont connect to my device.
It does initiate a connection when I plug the cable/device in USB but after a few seconds, its back to the home screen saying "Device Not Connected".
I have tried the following drivers with/without Kies 3:
SAMSUNG_USB_Driver_for_Mobile_Phones_1.5.24.0.exe
SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.33.0.exe
What am I doing wrong? Hope there is another option/method if Kingo doesnt work out, Thanks again.
Click to expand...
Click to collapse
Did you turn on USB Debugging mode?
You have to first enable the Developer Options before you can access USB debugging
Setting>About Device>Tap on Build Number 7 times until the screen shows Developer Options is enabled
hobbya said:
Did you turn on USB Debugging mode?
You have to first enable the Developer Options before you can access USB debugging
Setting>About Device>Tap on Build Number 7 times until the screen shows Developer Options is enabled
Click to expand...
Click to collapse
Hi... Yes, developer mode was turned on before starting the procedure.
What else could it be? Thanks
I have no clue. Do you have another Samsung phone to prove the setup on the computer? The Samsung drivers can recognize any Samsung phone if they have been installed properly.
hobbya said:
I have no clue. Do you have another Samsung phone to prove the setup on the computer? The Samsung drivers can recognize any Samsung phone if they have been installed properly.
Click to expand...
Click to collapse
Yes, I did root a Note 2 successfully with the same computer/setup but another/manual method(using Odin) with only Kies installed. I guess all required device drivers get installed when you install kies? This is the first time i'm using Kingo though.
Will this method work for my device? The only concern is I don't see I9192DDU1BML1 mentioned anywhere. Thanks
http://forum.xda-developers.com/showthread.php?t=2494435
^ this method did work for me on the earlier firmware before BML1, but i lost my wifi so had to flash a custom kernel , dunno if it will work for ML1 as for usb try dialing *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
had the same issue with kies and s4 drivers this sorted it out .
dovakinn said:
^ this method did work for me on the earlier firmware before BML1, but i lost my wifi so had to flash a custom kernel , dunno if it will work for ML1 as for usb try dialing *#0808# from your cell this would take you in usb settings, tick both mtp+adb , reboot , if they art already ticked uncheck them and check them again.
had the same issue with kies and s4 drivers this sorted it out .
Click to expand...
Click to collapse
Thanks a lot. Only MTP was checked, I checked the 2nd option MTP+ADB and rebooted the device. Hope this resolves the issue.
Unfortunately, I don't have sufficient privileges on this computer so will have to wait another 2 hours to verify it on my computer
This worked and now I have ROOT!!! Thanks a million everyone, especially dovakinn for that last master stroke!!!!
Is there a way to remove or delete the Supersu icon from the menu? I dont want to uninstall it, just hide the icon without using the native hide/unhide feature. Thanks Again!
bs24 said:
This worked and now I have ROOT!!! Thanks a million everyone, especially dovakinn for that last master stroke!!!!
Is there a way to remove or delete the Supersu icon from the menu? I dont want to uninstall it, just hide the icon without using the native hide/unhide feature. Thanks Again!
Click to expand...
Click to collapse
U have 2 options to hide Supersu icon.
Samsung way: Apps - Menu Button - Hide applications - Check supersu - Done
Supersu way - SuperSu - Settings - Launcher icon - Invisible from launcher
SilviuMik said:
U have 2 options to hide Supersu icon.
Samsung way: Apps - Menu Button - Hide applications - Check supersu - Done
Supersu way - SuperSu - Settings - Launcher icon - Invisible from launcher
Click to expand...
Click to collapse
Thanks SilviuMik. I got the following pop up as soon as I clicked on SuperSu - "Samsung KNOX has been detected. this might limit root capabilities and cause annoying popups. Try to disable KNOX?"
Should I say OK or Cancel?
Srry but Im completely new to this KNOX business. Many Thanks
bs24 said:
Thanks SilviuMik. I got the following pop up as soon as I clicked on SuperSu - "Samsung KNOX has been detected. this might limit root capabilities and cause annoying popups. Try to disable KNOX?"
Should I say OK or Cancel?
Srry but Im completely new to this KNOX business. Many Thanks
Click to expand...
Click to collapse
Press Ok
Otherwise u will get errors while using su apps
SilviuMik said:
Press Ok
Otherwise u will get errors while using su apps
Click to expand...
Click to collapse
Worked like a charm! :good: :victory:
Thanks once again from the bottom of my heart to You, dovakinn, gladson1976 and hobbya!!!
bs24 said:
This worked and now I have ROOT!!! Thanks a million everyone, especially dovakinn for that last master stroke!!!!
Is there a way to remove or delete the Supersu icon from the menu? I dont want to uninstall it, just hide the icon without using the native hide/unhide feature. Thanks Again!
Click to expand...
Click to collapse
I know you are already removed/hide your super su icon . But here is also some option
Just install super user elite and switch to ghost mode .
Install nova launcher latest version and hide app from the menu .
Thank you .
Sent from my GT-S7562 using XDA Premium 4 mobile app
AlfasPeralassery said:
I know you are already removed/hide your super su icon . But here is also some option
Just install super user elite and switch to ghost mode .
Install nova launcher latest version and hide app from the menu .
Thank you .
Sent from my GT-S7562 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes I have already hidden the Supersu, thanks though for the alternative approach.
A couple of observations though, which may or may not be significant:
1) While installing SuperSu, there was a pop-up on the device which said something like "SuperSu has tried to make changes to your device and was blocked. It gave only 2 options I think (a) Block now or (b) Inform me again after 30 days. I chose option b.
2) I chose to block KNOX when it asked me as soon as I started SuperSu and It gave me a success message.
Now my question is - Will this 30 day counter give a prompt to block supersu again after 30 days?
If someone chooses Yes, then what will happen? Will the device become unrooted or apps needing root become dysfunctional?
I did block KNOX later so shouldn't all these notifications etc not come up anymore. Thanks!!
bs24 said:
Yes I have already hidden the Supersu, thanks though for the alternative approach.
A couple of observations though, which may or may not be significant:
1) While installing SuperSu, there was a pop-up on the device which said something like "SuperSu has tried to make changes to your device and was blocked. It gave only 2 options I think (a) Block now or (b) Inform me again after 30 days. I chose option b.
2) I chose to block KNOX when it asked me as soon as I started SuperSu and It gave me a success message.
Now my question is - Will this 30 day counter give a prompt to block supersu again after 30 days?
If someone chooses Yes, then what will happen? Will the device become unrooted or apps needing root become dysfunctional?
I did block KNOX later so shouldn't all these notifications etc not come up anymore. Thanks!!
Click to expand...
Click to collapse
I didn't see anything like that . Sorrt no answers ....
Sent from my GT-S7562 using XDA Premium 4 mobile app
bs24 said:
Yes I have already hidden the Supersu, thanks though for the alternative approach.
A couple of observations though, which may or may not be significant:
1) While installing SuperSu, there was a pop-up on the device which said something like "SuperSu has tried to make changes to your device and was blocked. It gave only 2 options I think (a) Block now or (b) Inform me again after 30 days. I chose option b.
2) I chose to block KNOX when it asked me as soon as I started SuperSu and It gave me a success message.
Now my question is - Will this 30 day counter give a prompt to block supersu again after 30 days?
If someone chooses Yes, then what will happen? Will the device become unrooted or apps needing root become dysfunctional?
I did block KNOX later so shouldn't all these notifications etc not come up anymore. Thanks!!
Click to expand...
Click to collapse
you have disable knox or remove all files
1 method if you want just disable knox from terminal run cmd as root but knox will remain
su pm disable com.sec.knox.seandroid
Click to expand...
Click to collapse
better way is delete or freeze all knox related files , i used root explorer you could try any app which lets you delete system files , just delete all these
com.sec.enterprise.knox.attestation
com.sec.knox.eventsmanager
KLMS Agent
KNOX
KNOX Notification Manager
KNOX Store
Click to expand...
Click to collapse
Hi there,
First off I would like to thank AngSanley for his work on the 4.4.4 CM 11 ROM, absolutely excellent development and keep up the good work. Hopefully I thought I would make a bug report here since i still can't post in the X development section:
1. Phone.apk problems:
a. Operator and Caller names coincide with each other (Issue was mentioned before in the thread however still looking forward to hearing from @AngSanley for a reply)
b. Repeated Missing Calls crash the com.android.phone process and the only solution is to call the missing call to get the phone app running again. To emulate that leave the call until it ends twice and see what happens
2. System Processes
In Jelly Bean and Ice Cream Sandwich you were able to disable system stock apps such as Browser, email, messages and it was possible to install the playstore apps as a replacement. I was wondering if it's still possible to enable that in the current ROM or it's not a bug as of the new releases.
Note: This also includes Trebuchet since I'm not currently using it.
3. Reboots in some cases disables the home button action in UDNB and prevents the lockscreen process from running properly which requires me to reinstall the ROM and Gapps while clearing cache and Delvik or by force stop and enabling lockscreen (which gets me to problem 2 sometimes).
Thank you again for the ROM and looking forward to hearing about upcoming updates with the ROM.
For the first issue, the problem is known. I mentioned it but it's difficult to fix.
For the third issue though, I found a solution. I disabled UDNB and installed Soft Buttons app. If the buttons crash, I disable them from the app and immediately enable them again. I reboot and... that's all!
(as for the second, I use some stock apps, so I can't tell you for sure)
Sent from Tapatalk via Nokia X
For the first issue, the problem is known. I mentioned it but it's difficult to fix.
Click to expand...
Click to collapse
Hopefully it gets addressed because it makes the phone literally unusable. The current list by AngSanley doesn't show it so I hope it's addressed to him.
For the third issue though, I found a solution. I disabled UDNB and installed Soft Buttons app. If the buttons crash, I disable them from the app and immediately enable them again. I reboot and... that's all!
Click to expand...
Click to collapse
Any specific app on the playstore because there are many apps for it
(as for the second, I use some stock apps, so I can't tell you for sure)
Click to expand...
Click to collapse
No problem it's fine. The imitation of it can be made if you even disable messages for example. It shows immediately that the phone loses functionality especially in the lockscreen process.
I'm really looking forward to hearing from @AngSanley on these. Especially on the phone process issue .
ElementalXY said:
Any specific app on the playstore because there are many apps for it
Click to expand...
Click to collapse
Couldn't attach it from Tapatalk. Here you are!
(Note that you MUST disable UDNB from Settings > Apps first, because the phone will show you 2 navbars!)
plankton69 said:
Couldn't attach it from Tapatalk. Here you are!
(Note that you MUST disable UDNB from Settings > Apps first, because the phone will show you 2 navbars!)
Click to expand...
Click to collapse
Thank you very much . It's working well and even better than UNDB!
PS: I can now post in the development section so is it possible to repost it over there instead or wait for AngSanley?
Yea bro....ur all mentioned bugs are also happend with the me... and there is also a big problem.... this bug happed with me two times and i need to wipe dalvik cacke two times....
so that problem is when i install xpossed app n when i restart than the statusbar gone.. it says com.androd.systemui.apk stopped... plz find way to fix it without wipe dalcik cacke
n second problem is whn i install any new theme n appy n restart my phone than same happens.... please do something brohers... love this rom ... really awsm..
Yea bro....ur all mentioned bugs are also happend with the me...
Click to expand...
Click to collapse
Does the phone crash happen with you too in missed calls? If not then I honestly think I should wipe the phone haha.
yes... i also get that error phone procced stopped.... but i pressed ok button 4 5 times and its stopped... but if i donwload any cm theme and after appy it when i restart mob the process of sytemui stopped than i need to to wipe data that time tht ok button not working.. please find any trick repair it without formating data..
ElementalXY said:
Does the phone crash happen with you too in missed calls? If not then I honestly think I should wipe the phone haha.
Click to expand...
Click to collapse
You should. Do a full wipe before flashing CM11.
Dom3616 said:
You should. Do a full wipe before flashing CM11.
Click to expand...
Click to collapse
Unfortunately I won't be able to do that since I just bricked my phone while formatting to the original stock version lol. I'm currently stuck on Nokia Emergency Connectivity and will be sending it to the Nokia care center next month haha. I'll be doing a fresh install when I get it back.
PS: I'm guessing no solutions for this problem outside the warranty am I right?
ElementalXY said:
Unfortunately I won't be able to do that since I just bricked my phone while formatting to the original stock version lol. I'm currently stuck on Nokia Emergency Connectivity and will be sending it to the Nokia care center next month haha. I'll be doing a fresh install when I get it back.
PS: I'm guessing no solutions for this problem outside the warranty am I right?
Click to expand...
Click to collapse
Yes you are right.
I went through all the steps to unlock/root my Verizon Note 4. I _thought_ that included turning off all of the OTA/update stuff so that I wouldn't accidentally accept and update and destroy my hard work.
However, I got an update notification the other day, and it has persistently asked me to update every time I unlock the phone since.
How do I turn this off permanently?
Download Titanium Backup and disable system update.
tolymatev said:
Download Titanium Backup and disable system update.
Click to expand...
Click to collapse
Thank you. I was kinda hoping for a little more information. Which apps should be frozen to turn off the automatic updating? I thought I had everything that was OTA-related frozen already, but I obviously missed something. So I'm hoping to get a list of what I should check.
Tom2112 said:
Thank you. I was kinda hoping for a little more information. Which apps should be frozen to turn off the automatic updating? I thought I had everything that was OTA-related frozen already, but I obviously missed something. So I'm hoping to get a list of what I should check.
Click to expand...
Click to collapse
USE TITANIUM TO FREEZE "System updates 1.0" , there are two of them next to each other in the program list. Then go into TWRP recovery and wipe cache.
Thank you! I had missed one of those two. Now they're both frozen and problem solved.
Having a constant "Security Notice" on phone since rooting. Everything else works fine. Is there anyway I can maybe deactivate this function?
freeze in titanium backup...
Y0sHii said:
Having a constant "Security Notice" on phone since rooting. Everything else works fine. Is there anyway I can maybe deactivate this function?
Click to expand...
Click to collapse
to get rid of the security notice you will get(because the system is now rooted) simply install root explorer(or any root browser) and go to /system/app and delete securitylogagent or go into the folder and rename it adding .bkp to the end of the file name and reboot.
per
http://forum.xda-developers.com/showpost.php?p=68675715&postcount=2
I began getting this, too, after rooting my Note7. I solved it the way others suggested, with Titanium Backup by freezing the Security Log Agent. That worked for me.
SkyPhone said:
I began getting this, too, after rooting my Note7. I solved it the way others suggested, with Titanium Backup by freezing the Security Log Agent. That worked for me.
Click to expand...
Click to collapse
do you still have knox? i use samsung pay and security folder
You used the sprint method root at the N930V PHE or PH1? Not really related to thread, but just out of curiosity.
Same problem....
I'm having this same problem with my rooted note 7.
I've searched everywhere for securityagent on my note 7 and it's not there. The only way I can remove this threat found/restart device, is to remove device maintenance.
But then I lose the app done function and the advanced setting power saving mode.
I have disabled all knox and security realated apps.
But still still get the threat while device maintenance is there.
Does anyone know what the equivalent to securitylogagent is on a note 7 ????
Any help would be much appreciated, I am a noob, until 3 days ago I knew nothing, but I managed to unlock frp and root my note 7, but its been stressfull. I need help now...thanks.
Kellya86 said:
I'm having this same problem with my rooted note 7.
I've searched everywhere for securityagent on my note 7 and it's not there. The only way I can remove this threat found/restart device, is to remove device maintenance.
But then I lose the app done function and the advanced setting power saving mode.
I have disabled all knox and security realated apps.
But still still get the threat while device maintenance is there.
Does anyone know what the equivalent to securitylogagent is on a note 7 ????
Any help would be much appreciated, I am a noob, until 3 days ago I knew nothing, but I managed to unlock frp and root my note 7, but its been stressfull. I need help now...thanks.
Click to expand...
Click to collapse
You should have a package named SecurityLogAgent. Disabling this will stop the security notifications due to rooting. If you're referring to the Samsung messages regarding the recall, then you need to disable the Samsung Push service or just the notifications.
8
I'm not referring to them notifications, I have disabled Samsung push.
There is no package with the name 'securitylogagent' on my note 7.
I have researched this alot before joining and posting here. Its simply not there, no matter what I use to look for it. Just not there..
I would really like device maintenance back.. that's how iv got it disabled at the moment.
I am referring to the 'that found/restart device" warning that flags up in device maintenance.
Kellya86 said:
I'm not referring to them notifications, I have disabled Samsung push.
There is no package with the name 'securitylogagent' on my note 7.
I have researched this alot before joining and posting here. Its simply not there, no matter what I use to look for it. Just not there..
I would really like device maintenance back.. that's how iv got it disabled at the moment.
I am referring to the 'that found/restart device" warning that flags up in device maintenance.
Click to expand...
Click to collapse
Strange, there should be a folder at system/app/SecurityLogAgent
What firmware version are you on? What have you used to look for it?
I'm on 6.0.1, that I rooted on Sunday after I accidentally updated package disabler. I am a complete noob and have managed to just about get to this point without help.
I have looked for it using titanium backup, root browser and device control. It doesn't show on any...
So I have disabled a load of other things including device maintenance, com.samsung.andoid.sm.devicesecurity, and security manager service...
I was hoping one of these was the equivalent of securitylogagent.
Does this information below help?
Kellya86 said:
I'm on 6.0.1, that I rooted on Sunday after I accidentally updated package disabler. I am a complete noob and have managed to just about get to this point without help.
I have looked for it using titanium backup, root browser and device control. It doesn't show on any...
So I have disabled a load of other things including device maintenance, com.samsung.andoid.sm.devicesecurity, and security manager service...
I was hoping one of these was the equivalent of securitylogagent.
Does this information below help?
Click to expand...
Click to collapse
So by the build number I see that you are not on a Verizon firmware so the app names may be different. It appears you have UK firmware so you will have to find what the app name is for that firmware.
What I can suggest is that the next time you get the notification, long press on the icon at the left. You should be taken to the notification options for that app and you should also see an app info button on the right. you may be able to track the actual app down using this info or at least disable notifications.
Thanks for your reply.
Oh crap, I'll never find it then...
Is there a way I could post an image of my system so as some experienced members on here may look at it.??
Thanks again.
Hi All
Please excuse me if this has been answered before, I have a brand new Mi A2 Lite, all seems to be working fine but when I try to encrypt the phone (requirement for work) then it does into an endless reboot recycle and never completes so I have to do a forced wipe and reboot of the phone to get it back to a useable state, I am new to the whole Android experience so don't fully understand all the terminology used in these forums so please be gentle with me
I also do not see any option to update the phone even though it keeps telling me that it couldn't install system updates, so if you can help with that as well I would really appreciate it.
Thanks
Mark
MFUGATT said:
when I try to encrypt the phone (requirement for work) then it does into an endless reboot recycle and never completes so I have to do a forced wipe and reboot of the phone to get it back to a useable state
Click to expand...
Click to collapse
The phone always has encryption. You can enable a password too. Settings -> Security -> Screen Lock. What exactly did you do?
MFUGATT said:
I also do not see any option to update the phone even though it keeps telling me that it couldn't install system updates, so if you can help with that as well I would really appreciate it.
Click to expand...
Click to collapse
Settings -> Security -> Security Update
You need develooer mode in to use adb. Then see the section If the OTA fails on this guide.
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863
a1291762 said:
The phone always has encryption. You can enable a password too. Settings -> Security -> Screen Lock. What exactly did you do?
Settings -> Security -> Security Update
You need develooer mode in to use adb. Then see the section If the OTA fails on this guide.
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863
Click to expand...
Click to collapse
Thanks for replying
I go into Settings > Security & Privacy > Encryption & Credentials and then select Encrypt Phone, it tells me it needs to be fully charged and pulled in and then I select encrypt, it then goes into a reboot loop and needs to be hard reset, so never actually encrypts it.
I don't see Security Update in the security settings even after enabling developer mode.
Sorry for sounding stupid but I am new to all this
Thanks
Mark
MFUGATT said:
I go into Settings > Security & Privacy > Encryption & Credentials
Click to expand...
Click to collapse
Are you on Oreo or Pie? What version number do you see in Settings -> About?
Eg. My phone says android version 9 (that's pie) and build number PKQ1.180917.001.10.0.14.0.PDLMXIM (that's the September update).
I found that encryption screen burried under advanced.
My phone is already encrypted. No option to disable. That's what this phone does. Custom ROMs need a special encryption disabler.
MFUGATT said:
and then select Encrypt Phone, it tells me it needs to be fully charged and pulled in and then I select encrypt, it then goes into a reboot loop and needs to be hard reset, so never actually encrypts it.
Click to expand...
Click to collapse
That's definitely not standard for Pie. I'm fairly certain it's not how Oreo worked either...
MFUGATT said:
I don't see Security Update in the security settings even after enabling developer mode.
Click to expand...
Click to collapse
Hmm...
If you're on Oreo the update screen will be in a different place. I normally go Settings -> System -> Advanced -> System Update.
There have been people who bought A2 Lite but got a hacked Redmi Pro 6 instead... Don't panic yet, but if things are seeming odd... Look at this thread for some signs your phone was tampered with.
https://forum.xda-developers.com/mi-a2-lite/help/mi-a2-lite-lineageos-box-t3934710
MFUGATT said:
Thanks for replying
I go into Settings > Security & Privacy > Encryption & Credentials and then select Encrypt Phone, it tells me it needs to be fully charged and pulled in and then I select encrypt, it then goes into a reboot loop and needs to be hard reset, so never actually encrypts it.
I don't see Security Update in the security settings even after enabling developer mode.
Sorry for sounding stupid but I am new to all this
Thanks
Mark
Click to expand...
Click to collapse
Mi A2 Lite already comes encrypted by default. I know this because I use an work profile too.
I can be wrong, bit are you sure you got a genuine Mi A2 Lite, with the official ROM? Go to Settings -> About Device. Post a screenshot, please.
I've had a similar issue with 2 devices (32 and 64 gb variants), both phones unencrypted themselves without me doing something weird, the normal behavior with an encrypted phone is that when you reboot or turn on the device it asks for a pin to fully boot, but my phones after some usage skipped that step and boot without the pin, after that I cant re enable encryption unless I wipe the phones, both aren't redmi 6 pro because i checked and they receive every monthly update without any problem, i'm guessing it is a memory issue ( read somewhere mi a1 and a2 had eMMC problems)
a1291762 said:
Are you on Oreo or Pie? What version number do you see in Settings -> About?
Eg. My phone says android version 9 (that's pie) and build number PKQ1.180917.001.10.0.14.0.PDLMXIM (that's the September update).
I found that encryption screen burried under advanced.
My phone is already encrypted. No option to disable. That's what this phone does. Custom ROMs need a special encryption disabler.
That's definitely not standard for Pie. I'm fairly certain it's not how Oreo worked either...
Hmm...
If you're on Oreo the update screen will be in a different place. I normally go Settings -> System -> Advanced -> System Update.
There have been people who bought A2 Lite but got a hacked Redmi Pro 6 instead... Don't panic yet, but if things are seeming odd... Look at this thread for some signs your phone was tampered with.
https://forum.xda-developers.com/mi-a2-lite/help/mi-a2-lite-lineageos-box-t3934710
Click to expand...
Click to collapse
Thanks, so it would appear I have been sold a fake phone, following the instructions I appear to have a Redmi Pro 6, so the next question is how can I get this phone to a state where I can encrypt it.
Many thanks
Mark
MFUGATT said:
Thanks, so it would appear I have been sold a fake phone, following the instructions I appear to have a Redmi Pro 6, so the next question is how can I get this phone to a state where I can encrypt it.
Many thanks
Mark
Click to expand...
Click to collapse
First double check which your model is through fastboot using:
Code:
fastboot getvar
if you receive a code sakura then your model is Redmi 6Pro and the better would be returning it completely to stock or you´ll have more troubles in the way.