Develop Bugs

[Q] how to remove/disable update notification

I am unrooted and trying to find a way to keep from getting this notification. It downloaded
on its own-didnt do that with 2 previous updates. do i have to just keep ignoring it?
I have searched forums and net to no avail. btw, update and/or root not an option either.
thx for any ideas.
r, john

jb40 said:
I am unrooted and trying to find a way to keep from getting this notification. It downloaded
on its own-didnt do that with 2 previous updates. do i have to just keep ignoring it?
I have searched forums and net to no avail. btw, update and/or root not an option either.
thx for any ideas.
r, john
Click to expand...
Click to collapse
Not sure what version you're running, but you should be able to go to Setting, Applications (Applications Manager) whatever you have.
Find Samsung Update, stop it and uncheck notifications.

Sorry, I thought it was assumed. Im on ver 4.1.2
Also, the update comes from att. Greyed out in
App manager. Now what?

jb40 said:
Sorry, I thought it was assumed. Im on ver 4.1.2
Also, the update comes from att. Greyed out in
App manager. Now what?
Click to expand...
Click to collapse
With root not an option, not too sure....
I have ideas....
I'm really not sure if download has really been completed. You should have been prompted multiple times to accept the update, and the download.
Same goes for installing it, it requires multiple prompts and you must say continue.
So, the download gets saved in the /cache directory. If I'm right, and I should be, you should be able to power your phone down,
Then boot into stock recovery and clear cache which will delete the downloaded cache update file.
Boot into stock recovery (HOLD VOL UP+HOME+POWER)
Picture of stock recovery
http://galaxys2root.com/wp-content/uploads/2011/10/att-galaxys2-unroot-11-690x404.jpg
You want to choose wipe cache partition.
Then when you boot back up, race over to Settings, Applications again and stop the update service. I'd leave notifications turned on for now just to watch what the update process is attempting.

The dl started on its own. Finished too I would bet. Tried killing dl by reboot.
No joy.att must really want us to have this-I had to fetch the 2 previous updates
As I mentioned. Now I have cont/pp dialogue every 8 hrs. Process for notification is
Com.wssyncmldm -afraid to use stock recovery- I dontknow that it wont goof up
Something else-and my cache directory shows empty. (Using es explorer)

jb40 said:
The dl started on its own. Finished too I would bet. Tried killing dl by reboot.
No joy.att must really want us to have this-I had to fetch the 2 previous updates
As I mentioned. Now I have cont/pp dialogue every 8 hrs. Process for notification is
Com.wssyncmldm -afraid to use stock recovery- I dontknow that it wont goof up
Something else-and my cache directory shows empty. (Using es explorer)
Click to expand...
Click to collapse
You have to be root to really see what's in /cache.
Stock recovery really is harmless, for the most part. If you choose data/factory reset all of your installed apps (ones that you have downloaded and installed) are torched and your settings, like Google account info, mail setup etc.
Cleaning out /cache is a good thing.
Maybe someone else will stop by and have another suggestion, but since you said root is not an option, I can't think of another way right now to stop it from bugging.

Well, i suspected there was nothing i could do without root. something simple. the greyed out att update process
along with the attempt to force feed the update to me speaks volumes. to me. I've seen way too much of things i
don't like with this 4.3 silliness(improve my hardware, ok). they're going to have to do better than bug me every
8 hours to get me to install it....
thanks for the suggestions,
r, john

jb40 said:
Well, i suspected there was nothing i could do without root. something simple. the greyed out att update process
along with the attempt to force feed the update to me speaks volumes. to me. I've seen way too much of things i
don't like with this 4.3 silliness(improve my hardware, ok). they're going to have to do better than bug me every
8 hours to get me to install it....
thanks for the suggestions,
r, john
Click to expand...
Click to collapse
You are wise to avoid that locked down bootloader with Knox...g
Sent from my NOTE 2.750...
Courtesy of our amazing developers...

[Q] Troublesome installation of Xposed and GravityBox on Fairphone

Dear internet community,
i would like to adress my problems concerning the installation of Xposed and GravityBox on my Fairphone. You must know that this is my very first smartphone and i dont really know how to use them yet. But i know that i would like to be able to change my Locksreen wallpaper, whích is the only intention for me to try to install Xposed in the first place.
So lets get to the nuts and bolts:
Firstly i tried to "unroot" my phone (of which i dont have any clue what that might mean), but the program i used (universal unroot) gave me this message upon trying: "please allow root access now. If you cant allow root access your device is most likely not rooted". At this point i dont know if i am able to allow root acess to that program, which ist rediculous in itself since this program should allow me to do that in the first place. I checked in the settings but couldnt find anything that looked like root access.
The next step was to install Xposed (version 2.6.1 and then 2.7 both with the same result). After the installation and the reboot, Xposed states unter the "Framework" category that: "the latest version of Xposed is currently not active (my app manager tells me it is). Did you install the framework and reboot?". Again i did the reboot and i installed it. If try to go further into the Framework menu and press the "install/update"-button it tells me: "failed to get root access. make sure your device is rooted properly and you have not blocked shell commands".
My question now is: do you have a solution for my problem? I would be very thankfull and appreciative if you would offer me a solution, since my intentional desire of changing the Lockscreen Wallpaper is such a small thing that it is quite hillaours as to how much effort has to be put in to change this small detail. Please dear community, help me out!
With kind regards
Alex

Hi Alex,
AdmirAlex said:
Firstly i tried to "unroot" my phone (of which i dont have any clue what that might mean), but the program i used (universal unroot) gave me this message upon trying: "please allow root access now. If you cant allow root access your device is most likely not rooted". At this point i dont know if i am able to allow root acess to that program, which ist rediculous in itself since this program should allow me to do that in the first place. I checked in the settings but couldnt find anything that looked like root access.
Click to expand...
Click to collapse
First of all: I see no point in "unrooting" my device. Since you said, you don't have any clue what that might mean, maybe this helps.
The term "root" is comparable to the "admin rights" on your computer. Some people do not need those rights. But If you don't need it just don't use it. If you "unroot" your device, what you do is, you throw away those admin rights. I don't see why you want to do this. The only reason which comes to my mind, is if you want your manufacture to repair your phone using your warranty. They basically don't like it if your phone is rooted, and say it violates the warranty conditions. But then again: fairphone comes pre-rooted, so having root does not void the warranty of your fairphone.
Usually if a program wants to have those root(/admin) rights, a screen pops up where you have to confirm that the app might use those rights.
If you want to know for what root rights can be good for, just google "rooting android" or something like that to read up on that topic.
AdmirAlex said:
The next step was to install Xposed (version 2.6.1 and then 2.7 both with the same result). After the installation and the reboot, Xposed states unter the "Framework" category that: "the latest version of Xposed is currently not active (my app manager tells me it is). Did you install the framework and reboot?". Again i did the reboot and i installed it. If try to go further into the Framework menu and press the "install/update"-button it tells me: "failed to get root access. make sure your device is rooted properly and you have not blocked shell commands".
Click to expand...
Click to collapse
Seems like you are actually unrooted. To use xposed and all its cool modules you need to have root rights. Unrooting your phone to use xposed is just contra productive. Maybe install SuperSU to re-gain root rights. But maybe you need to re-flash your OS.
AdmirAlex said:
My question now is: do you have a solution for my problem? I would be very thankfull and appreciative if you would offer me a solution, since my intentional desire of changing the Lockscreen Wallpaper is such a small thing that it is quite hillaours as to how much effort has to be put in to change this small detail. Please dear community, help me out!
Click to expand...
Click to collapse
Wait, what? Did I understand correctly, that you unrooted your phone to use an app that requires root so that you can change your lockscreen background?
Dude, you can do this in the settings without any root/unroot/xposed stuff.
As you said it is just a small detail, and such a standard feature, so it would be CRAZY if you need to go through such a hassle.
Just go into settings and somewhere in the display or lockscreen settings you can choose a background (you might need to disable the mood background for this). I do not have my fairphone anymore, so I cannot tell you where exactly that option is. Maybe someone else can point to the the exact location of that setting.

Hyst said:
...Maybe someone else can point to the the exact location of that setting.
Click to expand...
Click to collapse
I can't find any option for a different lockscreen image on my FP - only normal background image (wich is then also used for lockscreen, if I have mood background disabled). So I would also suggest GravityBox, which seems to be a too complex topic for your first smartphone ever...

dirtycutmaster said:
I can't find any option for a different lockscreen image on my FP - only normal background image (wich is then also used for lockscreen, if I have mood background disabled). So I would also suggest GravityBox, which seems to be a too complex topic for your first smartphone ever...
Click to expand...
Click to collapse
I know that this option is there. I had a custom lockscreen background (without using some xposed module like gravitybox). I will check with a friend who has a Fairphone, and tell you where the setting is.

I am sorry. Apparently I was mistaken. Changing the lockscreen background to a different wallpaper than the homescreen background seems not to be possible. You can just choose between mood background or not. I thought I had two different backgrounds while I had my Fairphone, but seems like I was wrong. sorry
Why is this not implemented? What I know for sure is that is a feature in CM and and Samsungs stock android version. I do not know about AOSP android.

Thanks for your feedback, Hyst!
I second your question about the missing implementation, but that's quite in a row with some other phone's stock features I am missing on the FP - e.g. a more solid gps, special character search in contacts and some other things other phones can do. Then I remember, Fairphone is still quite new on the market and neither has the experience nor the financial background to act like e.g. Samsung would do. And taken that into account, I'm sure they will grow with the requirements...

Hyst said:
Hi Alex,
First of all: I see no point in "unrooting" my device. Since you said, you don't have any clue what that might mean, maybe this helps.
The term "root" is comparable to the "admin rights" on your computer. Some people do not need those rights. But If you don't need it just don't use it. If you "unroot" your device, what you do is, you throw away those admin rights. I don't see why you want to do this. The only reason which comes to my mind, is if you want your manufacture to repair your phone using your warranty. They basically don't like it if your phone is rooted, and say it violates the warranty conditions. But then again: fairphone comes pre-rooted, so having root does not void the warranty of your fairphone.
Click to expand...
Click to collapse
Yeah i know now why the Phone needs to be rooted in order to work in a way i would like it to.
Seems like you are actually unrooted. To use xposed and all its cool modules you need to have root rights. Unrooting your phone to use xposed is just contra productive. Maybe install SuperSU to re-gain root rights. But maybe you need to re-flash your OS.
Click to expand...
Click to collapse
So atm the only viable solution that i could find is to reflash the Android of my phone. I tried to but the installation progress aborts itself so i am not able to reflash atm. The Fairphone support team got a mail from me, so lets wait and see.
Wait, what? Did I understand correctly, that you unrooted your phone to use an app that requires root so that you can change your lockscreen background?
Dude, you can do this in the settings without any root/unroot/xposed stuff.
As you said it is just a small detail, and such a standard feature, so it would be CRAZY if you need to go through such a hassle.
Click to expand...
Click to collapse
Now in a later post of yours you said that it is not possible. But i qould like to go into why i unrooted my phone. I was watching a Video from this site and misunderstood what has been said. I unrooted my phone, thinking that this would be necessary to make Xposed work. By that time i didnt really know how all of this works. I know its a rookie mistake and a "stupid" one, but i learned something and i am okay with it.
The next task now is to reflash my phone. Maybe you guys have an idea as to why it wont work: I followed the instructions on the Fairphone website and it still aborts during installation.
Edit: I am not allowed to linkt external websites, so i cant give you the video and fairphone installation guide links.
Greetings
Alex

Hope I didn't get it completely wrong but just wanna throw in another idea: why don't you reset your phone to factory settings? Reflashing it sounds like a lot of work for a beginner like you.. (Didn't do it either)
Since the phone is/was rooted from release on, resetting it should do the charme, imo. If you don't have a lot of files to lose I'd try that.
PS: really funny how complicated it got for you since your main intention was to change the lockscreen wallpaper )
PPS: follow this http://forum.xda-developers.com/wiki/Fairphone_Fairphone/Guides#How_to_partition_your_Fairphone from the 4th point on

arghwhymustiregister said:
Hope I didn't get it completely wrong but just wanna throw in another idea: why don't you reset your phone to factory settings? Reflashing it sounds like a lot of work for a beginner like you.. (Didn't do it either)
Since the phone is/was rooted from release on, resetting it should do the charme, imo. If you don't have a lot of files to lose I'd try that.
Click to expand...
Click to collapse
Yeah, i tred that a couple of times, but it wouldnt remove the unroot
PPS: follow this http://forum.xda-developers.com/wiki/Fairphone_Fairphone/Guides#How_to_partition_your_Fairphone from the 4th point on
Click to expand...
Click to collapse
Thanks for the link, i will try that in the meantime
PS: That, unfortunately, didnt do the trick
Edit2:
Since the Fairphone support hasn't replied yet, i tried another solution, but i need to ask you guys for help. I was following the instructions in the Fairphone wiki under the "How to restore Fairphone if you totally bricked it" topic. All the necessary files and programes are downloaded. Now when i choose the scatter file of the fairphone binarys the program gives me this message: "Error initialising scatter file failed. Please check the name of scatter file which you load is legal". if i press the download button the program gives me this message: "Download list is empty, please select a scatter file before executing"
I really dont get this. The fairphone binarys are supposed to work with this program, yet they are not. Can anyone help? Is there something really pbvious i have overlooked?
Greetz
Alex

Bump --> Please help me to figure out the SP Flash tool. To see the details check the post above
Thank you sooo much

AdmirAlex said:
Please help me to figure out the SP Flash tool.
Click to expand...
Click to collapse
I don't think you need to go through that mouch trouble as you're still able to use your phone (if I understood that correctly).
How about re-installing the Fairphone software from recovery? There's a nice guide on how to do that at:
fairphone.zendesk.com/hc/en-us/articles/202478028-Manually-install-Fairphone-OS-software-update-version-Cherry-1-6
Afterwards the superuser binaries should be back and you will have root access again.

haffenloher said:
I don't think you need to go through that mouch trouble as you're still able to use your phone (if I understood that correctly).
How about re-installing the Fairphone software from recovery? There's a nice guide on how to do that at:
fairphone.zendesk.com/hc/en-us/articles/202478028-Manually-install-Fairphone-OS-software-update-version-Cherry-1-6
Afterwards the superuser binaries should be back and you will have root access again.
Click to expand...
Click to collapse
Thanks for the hint, but that exact process does not work, since the update aborts itself giving an error message but not specifiying on which error exactly cause it to abort... I am frustrated at this point.
Greetings
Alex

AdmirAlex said:
Thanks for the hint, but that exact process does not work, since the update aborts itself giving an error message but not specifiying on which error exactly cause it to abort... I am frustrated at this point.
Click to expand...
Click to collapse
Which Fairphone model do you have? If it's the old one (from last year's batch), did you already use the repartitioning tool to "unify" your internal storage? Which update did you try to apply (exact filename)?

haffenloher said:
Which Fairphone model do you have? If it's the old one (from last year's batch), did you already use the repartitioning tool to "unify" your internal storage? Which update did you try to apply (exact filename)?
Click to expand...
Click to collapse
Its the second Batch phone, so the FP1U. I tried it with almost any OS given on the homepage. Those are the ones i tried:
OTA_AOSP-4.2.2_2014-08-05.zip
Fairphone_FP1_OS_v1_6_OTA_2014-07-31.zip
Fairphone_Cherry_1.6_FUSE_Image_2014-07-31.zip
Fairphone_FP1_OS_1G13G_v1_6_OTA_2014-07-31.zip
The Fairphone updater tells me that my phone is running the "Chenpi" version 1.5 which i cannot find on the hompage (thats strange isnt't it?)
What else could be done here?
Greetings and thank you very much for your ideas so far!
Alex

AdmirAlex said:
Fairphone_FP1_OS_v1_6_OTA_2014-07-31.zip
Click to expand...
Click to collapse
Applying that one from recovery clearly should have worked. I've even used it myself with my (already repartitioned) first batch phone.
If you want to be sure the .zip file you downloaded is not corrupted, compute its MD5 checksum. If you're under Windows, use a tool like heise.de/download/md5summer.html
Under Linux, just use md5sum <filename>
The checksum should match the one found on Fairphone's software update page: 664ca09368a4c922a12dc2526afe092b
AdmirAlex said:
The Fairphone updater tells me that my phone is running the "Chenpi" version 1.5 which i cannot find on the hompage (thats strange isnt't it?)
Click to expand...
Click to collapse
1.5 is the version your phone was shipped with, I think. As they issued the update to 1.6 just a few days after the new phones started shipping, I guess they thought putting only the new image up on their website was enough.

haffenloher said:
Applying that one from recovery clearly should have worked. I've even used it myself with my (already repartitioned) first batch phone.
Click to expand...
Click to collapse
The awesome support Team worked something out and my phone is finally rerooted! Now, i have installed Xposed, rebooted it, installed Gravitybox, rebooted it and both programs are working fine. After some fiddling around it finally has worked!! For most of you it might seem to be a small thing and really not that important, but for me it is. Honestly the only two things i really use to personalize the phone is the Wallpaper / Lockscreen and the WakeupCall ringtone.
Thank you so much for all of your support and patience!
Greetings
Alex

Tabs S changes.

Hi all,
I hope this is the right to post.
I am at the point of throwing my SM-T800 in the bin. This Samsung bloatware is getting beyond a joke.
I have been toying with the idea of putting a custom ROM on it just so that I can get rid of all this Samsung crap.
Do I need to go that far or can I just put a rootkit on the tablet or maybe there is some other way to achieve my goal.
At the moment I’m just looking for ideas. Anything that could help would be appreciated.
Cheers,
Graeme.

I haven't had much of problem with this. One way to get rid of Samsung bloatware, is to go into settings > applications. Go through the list of every app. If you have no use for it, then delete it. If there is no delete option, like with flipboard or "internet", then disable it. This will stop all of its apps services and also will uninstall all of this apps' updates from the storage. Of course, the tablet will not become exactly "fast" after this because Exynos 5 Octa 5420 was a modest SoC, specially when coupled with the QHD screen. However, freeing up some space will be appreciated on the 16GB storage models.
PS: if there is no delete or disable option, click on the storage and at least delete cache and data. At least this will free some storage.

Akopps said:
I haven't had much of problem with this. One way to get rid of Samsung bloatware, is to go into settings > applications. Go through the list of every app. If you have no use for it, then delete it. If there is no delete option, like with flipboard or "internet", then disable it. This will stop all of its apps services and also will uninstall all of this apps' updates from the storage. Of course, the tablet will not become exactly "fast" after this because Exynos 5 Octa 5420 was a modest SoC, specially when coupled with the QHD screen. However, freeing up some space will be appreciated on the 16GB storage models.
PS: if there is no delete or disable option, click on the storage and at least delete cache and data. At least this will free some storage.
Click to expand...
Click to collapse
Hi Akopps
I think I may have not made my goal clear.
My aim is to get rid of any unnecessary Samsung software for no other reason than not having them tell me what I can and cannot do with my device. I have owned it for more than 3 years now and it is well out of warranty. I am happy with the performance. It meet my needs. Disabling their software and removing latest updates just seems a bit futile. Samsungs' "Kids Mode" app just updates itself and then wants to take control of what you see. I'm in my early sixties, no young children or grandchildren and with no need for "Nanny" Samsung to tell me what to do.
I just want to get rid of there "preloaded" software. After all, I own the device, why shouldn't I be able to remove the software?
Cheers,
Graeme

I have tried the same but was unable to use any of the how to.
See here https://forum.xda-developers.com/galaxy-tab-s/help/help-to-flash-sm-t800-chagallwifi-mm-6-t3727755

1: gain root
2: download Titanium Backup
3: Remove any bloatware you want with Titanium Backup
No custom room necessary.

noxarcana said:
1: gain root
2: download Titanium Backup
3: Remove any bloatware you want with Titanium Backup
No custom room necessary.
Click to expand...
Click to collapse
I'd prefer something like system app remover or BK package disabler in case something is inadvertently removed that causes an issue. It can easily be restored.

Hi guys,
do you have a personal safe-to-remove apps list?
I've tryed following the ones already discussed in this forum section aswell as others but I've encountered some freezes/reboots. (For example by removing BBCAgent , BeaconManager and Context Service).
Thanks for your time and happy new year! (tab s still going strong after 3.5 years yay)

noxarcana said:
1: gain root
Click to expand...
Click to collapse
And how do you gain root on the Samsung MM Rom?

Viper780 said:
And how do you gain root on the Samsung MM Rom?
Click to expand...
Click to collapse
You need to flash superSU with twrp or odin I guess.
Give this thread a read.

ashyx said:
I'd prefer something like system app remover or BK package disabler in case something is inadvertently removed that causes an issue. It can easily be restored.
Click to expand...
Click to collapse
True. That would definitely be the safest bet. I've made a few stumbles before uninstalling something by mistake.
Viper780 said:
And how do you gain root on the Samsung MM Rom?
Click to expand...
Click to collapse
Tonyspo is mostly correct. Flash TWRP using odin, boot into TWRP, flash superSU. However, if you're only goal is to remove preloaded apps, I'd suggest taking ashyx's advice and just install BL package disabler from the app store. I use that on my Galaxy S7 and it works great.

I've tried odin, but in download Mode all of my PC's won't recognize the tablet. When booted everything is fine (but than I can't flash)
I've read its because Samsung removed the Option in the Rom to get root rights.
I've also tried Heimdall and I only get error msgs.

Viper780 said:
I've tried odin, but in download Mode all of my PC's won't recognize the tablet. When booted everything is fine (but than I can't flash)
I've read its because Samsung removed the Option in the Rom to get root rights.
I've also tried Heimdall and I only get error msgs.
Click to expand...
Click to collapse
I guessing you're actually in recovery mode not download mode if the tablet is recognised when booted to the os.

It says it is the Download Mode
pretty sure it is the correct one

Viper780 said:
It says it is the Download Mode
pretty sure it is the correct one
Click to expand...
Click to collapse
In that case what makes you think your device isn't detected in download mode?
Screen shots would help.

Help - Rooted - Island Not working

Hello,
Need some help. I was able to get TWRP on my new Tab S4 and root it with Magisk without issue. I was trying to install and get Island working so I could sandbox a few apps for privacy and I can't get it to work. A Knox notice keeps coming up "The work profile cannot be created because the OS was changed". Then I give Island root access, it appears to work, then a lovely Knox screen (The Knox work profile Icon) comes up saying an unauthorized application was installed and blocked, please contact your admin. So I spent the next 4 hours combing forums and Island's install doco to find a solution. I have tried everything, I used debloat to turn all the Knox stuff off but the needed work space. I even left work space running but just disabled the Knox models in it. I installed Island manually with ADB, and gave it God rights. That made things worse.... Now this nasty screen came up at boot and forced me to recover the OS because it couldn't be bypassed, if just prompted to factory reset the device. I have exhausted all my known options and am now requesting air support.
Thanks in advance,
One Very Frustrated Android Amature

DevinN said:
Hello,
Need some help. I was able to get TWRP on my new Tab S4 and root it with Magisk without issue. I was trying to install and get Island working so I could sandbox a few apps for privacy and I can't get it to work. A Knox notice keeps coming up "The work profile cannot be created because the OS was changed". Then I give Island root access, it appears to work, then a lovely Knox screen (The Knox work profile Icon) comes up saying an unauthorized application was installed and blocked, please contact your admin. So I spent the next 4 hours combing forums and Island's install doco to find a solution. I have tried everything, I used debloat to turn all the Knox stuff off but the needed work space. I even left work space running but just disabled the Knox models in it. I installed Island manually with ADB, and gave it God rights. That made things worse.... Now this nasty screen came up at boot and forced me to recover the OS because it couldn't be bypassed, if just prompted to factory reset the device. I have exhausted all my known options and am now requesting air support.
Thanks in advance,
One Very Frustrated Android Amature
Click to expand...
Click to collapse
Afaik once knox 0x1 is triggered there is no way to use Island since work profile cant be added. In fact i tried a lot of stuff to get it working on stock software with just recovery and root being installed, tried unrooting going back to original stock.. nothing worked.
OS has been changed probably refers to the knox counter.

Unfortunately Samsung locks Knox if you unlock your device. Afaik this is irreversible.
That is the reason I am still on stock.
Edit: Island should still work though. Haven't tried it though.

spookyspookster said:
Unfortunately Samsung locks Knox if you unlock your device. Afaik this is irreversible.
That is the reason I am still on stock.
Edit: Island should still work though. Haven't tried it though.
Click to expand...
Click to collapse
Is that an OS limitation? I have other rooted Samsung tablets, (older) running like 5.1 and 6.1 and they WORK. Island is able to create its OWN sandbox with root access on those. I feel like this is a security applet / process blocking this only, not a technical limitation. I was able to create the work profile with ADB outside of root access, I was able to assign Island with both Device Owner and Admin over the work profile and it was technically working. Some Knox security process that I didn't disable (most likely because it's a com.system that isn't listed in debloat) that is blocking it from displaying (I believe it is working) with a security overlay that I can't close. I need help finding that, and killing it with fire. I think it is beyond me technically. I am a network admin, not programer, though I speak some programming basic concepts via my network background. Just enough to get me in trouble and get to to here to ask for help.

dr460nf1r3 said:
Afaik once knox 0x1 is triggered there is no way to use Island since work profile cant be added. In fact i tried a lot of stuff to get it working on stock software with just recovery and root being installed, tried unrooting going back to original stock.. nothing worked.
OS has been changed probably refers to the knox counter.
Click to expand...
Click to collapse
Ok, after much OCD digging, I found the permissions and the Knox security file that was popping that up. I deleted the permissions with adb, killed those 2 processes within the workgroup files using root deleter app and now it works. Note, the whole drive is decrypted by default, I applied the decrypt patch when I rooted. So island was able to successfully provision a work profile and is admin over it.

DevinN said:
Ok, after much OCD digging, I found the permissions and the Knox security file that was popping that up. I deleted the permissions with adb, killed those 2 processes within the workgroup files using root deleter app and now it works. Note, the whole drive is decrypted by default, I applied the decrypt patch when I rooted. So island was able to successfully provision a work profile and is admin over it.
Click to expand...
Click to collapse
Hi,
Would you be able to provide a step by step guide ?
Thanks

DevinN said:
Ok, after much OCD digging, I found the permissions and the Knox security file that was popping that up. I deleted the permissions with adb, killed those 2 processes within the workgroup files using root deleter app and now it works. Note, the whole drive is decrypted by default, I applied the decrypt patch when I rooted. So island was able to successfully provision a work profile and is admin over it.
Click to expand...
Click to collapse
A guide please?!:good:

DevinN said:
Ok, after much OCD digging, I found the permissions and the Knox security file that was popping that up. I deleted the permissions with adb, killed those 2 processes within the workgroup files using root deleter app and now it works. Note, the whole drive is decrypted by default, I applied the decrypt patch when I rooted. So island was able to successfully provision a work profile and is admin over it.
Click to expand...
Click to collapse
Please provide your method, i think we are a lot in that situation : rooted and no work profile allowed by knox and tima. I even tried custom kernels announcing knox stuff disable and it's not workin either.
Thks.

Nvm

DevinN said:
Ok, after much OCD digging, I found the permissions and the Knox security file that was popping that up. I deleted the permissions with adb, killed those 2 processes within the workgroup files using root deleter app and now it works. Note, the whole drive is decrypted by default, I applied the decrypt patch when I rooted. So island was able to successfully provision a work profile and is admin over it.
Click to expand...
Click to collapse
Hi how you do this I need to do the same. Thanks

Seriously, he shared the news but didn't share how he did it??

Please provide details

Anybody has a solution on this topic or is this thread dead?

@DevinN, can you provide more info please? What files and apps did you delete?
Edit:
I found that package "com.samsung.android.knox.containeragent" causes the black block-screen, so i disabled it. (adb shell pm disable ...).
Island still refuses fo be installed automatically (security policy prevents creation of work profile because a custom os has been installed) or using root (cannot start the work profile user)
Code:
TZ_init: : TZ_init Process: Device tampered, tamper fuse is set!
TZ_init: : trustlet initialization failed

trogper said:
@hardkeyboard, can you provide more info please? What files and apps did you delete?
Edit:
I found that package "com.samsung.android.knox.containeragent" causes the black block-screen, so i disabled it. (adb shell pm disable ...).
Island still refuses fo be installed automatically (security policy prevents creation of work profile because a custom os has been installed) or using root (cannot start the work profile user)
Click to expand...
Click to collapse
I replied to DevinN, I wish I know when I write post, but now I don't need because use Nicelock with multistar with dr. Ketan rom with secure folder working

I suppose there is no update here or any idea what permissions and knox security file we are talking here ?

Need Help - Samsung Galaxy Tab S2 SM-T817V Knox

I have this tablet which is being restricted to use due to Knox. It appears to be for some vendor. It takes over the device even though it's not connected to the internet and doesn't allow me to do anything with it. I have read all the threads I can find and tried every possible option through Odin to install new firmware.
I understand this model is a giant pain due to Verizon and I may not be able to root this for customization. But is there not a way to get a factory clean firmware on here that doesn't have this Knox vendor customization? If not, is this good for anything or just throw it in the trash?

popguru said:
I have this tablet which is being restricted to use due to Knox. It appears to be for some vendor. It takes over the device even though it's not connected to the internet and doesn't allow me to do anything with it. I have read all the threads I can find and tried every possible option through Odin to install new firmware.
I understand this model is a giant pain due to Verizon and I may not be able to root this for customization. But is there not a way to get a factory clean firmware on here that doesn't have this Knox vendor customization? If not, is this good for anything or just throw it in the trash?
Click to expand...
Click to collapse
Same issue but I added another user and it works fine because knox isn't running device admin. Owner doesn't work and either does usb debugging. I'm thinking of calling know for remote support.

I beat frp on this same tablet before
popguru said:
I have this tablet which is being restricted to use due to Knox. It appears to be for some vendor. It takes over the device even though it's not connected to the internet and doesn't allow me to do anything with it. I have read all the threads I can find and tried every possible option through Odin to install new firmware.
I understand this model is a giant pain due to Verizon and I may not be able to root this for customization. But is there not a way to get a factory clean firmware on here that doesn't have this Knox vendor customization? If not, is this good for anything or just throw it in the trash?
Click to expand...
Click to collapse
Can u create a geust user account ? If so activate this accou t log into that account download the apk and run the very popular one click root app that i wont say but kinda rhymes with bingo shoot any ways run the apk (it wont root your device) and instal it the run the root app itll get to 99% and then quit but the entire device will be like outta the box new as far as the os goes you wont have frp lock or anything
Sorry for the run on sentence and idk how old this thread is but anyway and shout ouf to whoesever red car is with lisence plate xda guy in canada just not the country

Grimlinkush said:
Can u create a geust user account ? If so activate this accou t log into that account download the apk and run the very popular one click root app that i wont say but kinda rhymes with bingo shoot any ways run the apk (it wont root your device) and instal it the run the root app itll get to 99% and then quit but the entire device will be like outta the box new as far as the os goes you wont have frp lock or anything
Sorry for the run on sentence and idk how old this thread is but anyway and shout ouf to whoesever red car is with lisence plate xda guy in canada just not the country
Click to expand...
Click to collapse
Thank you for the response. This is still very much an active question for me.
I'm able to create the user account, install and start the install for the mentioned apk. However, it stops at 90%, and I get this error "Root Failed" Error Code 0x166508. It recommends I use the PC version, but USB Debugging is disabled in main account and I can't even access Developer tools for this new account.
Additionally, I'm unable to use the Home button. I get the following message "Security policy prevents use of Home key"
Seems like no matter what is suggested, there is something new that is blocking this from being used.