Related
Hi,
Being in Australia the Captivate Glide is not available locally so ordered it online via a parallel importer.
I was supposed to receive the AT&T version but due to no stock I received the Rogers i927R version.
I cannot root the device as my work place prevents it since I need to use it for work related messaging.
1. Is there a list of differences between the AT&T and Rogers ROM's ?
2. I'm on Optus which uses 900/2100MHz, so the phone will connect on 2100.
Using an App called Network Signal Info I can see data connection switching when I'm moving around as normal, but the data symbol in the notification bar doesn't match when on 3G as follows:
NetInfo | Speed | Notif-Bar-Symbol
GPRS | 55kbit | G
UMTS (3G) | 384kbit | 4G <-- doesnt say 3G
HSDPA | 7.2Mbit | 4G
This a bug or ROM incompatibility ?
Thanks.
The only differences I know of is that the Rogers ROM is carrier-iq free and the tethering option is unlocked.
In my AT&T version, I can't find any way to manually toggle between 2G and 3G networks. However the network info apps/widget show it's automatically switching between EDGE, HSDPA and HSPA.
incidentflux said:
In my AT&T version, I can't find any way to manually toggle between 2G and 3G networks. However the network info apps/widget show it's automatically switching between EDGE, HSDPA and HSPA.
Click to expand...
Click to collapse
It would be handy to sometimes by able to force 2G to save battery.
Anyway, can the Rogers ROM be flashed onto the AT&T Glide and still work ?
vil33 said:
The only differences I know of is that the Rogers ROM is carrier-iq free and the tethering option is unlocked.
Click to expand...
Click to collapse
Good point.
Sounds like I should stick with the Rogers one they sent me rather than swap it for an AT&T version since the Rogers one will be most compatible without having to 'root'.
Carriers in Australia seem to allow tethering by default as long as you have a working App for it.
Thanks.
Which parallel importer did you use, do they have an online storefront?
Hope the Rogers version pricing comes down as fast the AT&T one. That's I went for At&T, down the line I'll end up flashing it with an open ROM. Mostly because of OpenVPN support.
Maruzko said:
It would be handy to sometimes by able to force 2G to save battery.
Anyway, can the Rogers ROM be flashed onto the AT&T Glide and still work ?
Click to expand...
Click to collapse
Indeed that's why I asked, since I don't use any data packages.
I checked my mom's S II, appears to be an AT&T carrier limitation. It won't even scan for other networks. I set her S II to 2G.
Earlier I wasn't concerned with the AT&T ROM, but this one is annoying, I could save some serious battery time by switching to 2G.
incidentflux said:
Which parallel importer did you use, do they have an online storefront?
Click to expand...
Click to collapse
mobicity.com.au
They've been very helpful and responsive, trying to get stock as quickly as possible.
When they couldnt get the AT&T Captivate Glide they sent me the Rogers Galaxy S Glide.
Seems that was the better way to go.
AT&T locks down their network and band select while Rogers does not. AT&T uses an "H+" on the HSDPA network to show status while Rogers uses a "4G".
Learned by flashing Rogers ROM onto an ATT cglide. Changed the model to 927R as well. Went back to ATT when I noticed the loss of the ATT wifi options.
Tynar said:
AT&T locks down their network and band select while Rogers does not. AT&T uses an "H+" on the HSDPA network to show status while Rogers uses a "4G".
Click to expand...
Click to collapse
So even after rooting the phone, there's no way to manually change bands while on the AT&T ROM?
Tynar said:
Learned by flashing Rogers ROM onto an ATT cglide. Changed the model to 927R as well. Went back to ATT when I noticed the loss of the ATT wifi options.
Click to expand...
Click to collapse
Which WiFi options? Is the Rogers ROM disabling some WiFi options?
incidentflux said:
So even after rooting the phone, there's no way to manually change bands while on the AT&T ROM?
Which WiFi options? Is the Rogers ROM disabling some WiFi options?
Click to expand...
Click to collapse
I'm using the Rogers version in Australia.
I have all the normal WiFi options and have used it at home and on public ones with no issues.
I think, just guessing, that Tynar is talking about the customized WiFi options on the AT&T ROM I have read about which gives you access to their own WiFi network.
Tynar said:
AT&T locks down their network and band select while Rogers does not. AT&T uses an "H+" on the HSDPA network to show status while Rogers uses a "4G".
Click to expand...
Click to collapse
Yep, I since had a look at the User Guides, of which there is a different one for each version Rogers and AT&T. The ROM's have been customized to show different symbols for mobile connectivity.
incidentflux said:
Indeed that's why I asked, since I don't use any data packages.
I checked my mom's S II, appears to be an AT&T carrier limitation. It won't even scan for other networks. I set her S II to 2G.
Earlier I wasn't concerned with the AT&T ROM, but this one is annoying, I could save some serious battery time by switching to 2G.
Click to expand...
Click to collapse
Ya... Thats at&t limitation, I guess... But atleast in my sister's AT&T Thrill phone (running Froyo + rooted with SuperOneClick) the "NETWORK" app (LINK) from AM/PlayStore works and helps in selecting 2G only or 3G only whenever needed...
But even that app is NOT working on my rooted CapGlide... May be because this phone has only rooted-ROM and not rooted-Kernal (as told by rooting guide in cap.glide development section)... Experienced members please help... I badly need 2G only for battery backup and 3G only for good speed as 3G coverage in my place is not great...
Thanks...
kanagadeepan said:
But even that app is NOT working on my rooted CapGlide... May be because this phone has only rooted-ROM and not rooted-Kernal (as told by rooting guide in cap.glide development section)... Experienced members please help... I badly need 2G only for battery backup and 3G only for good speed as 3G coverage in my place is not great...
Thanks...
Click to expand...
Click to collapse
With AT&T Rom, you don't have that option.
You can flash Rogers Room (Untouched or Custom Rom) where you have the option of manually choosing network and choosing 2G/3G
Switching to 2G would really save on battery life.
So the notable differences are...
1. The AT&T ROM doesn't allow band switching or manual carrier search and selection. While the Rogers ROM does not have this restriction?
2. AT&T allows WiFi tethering, while Rogers doesn't?
3. Both versions come with Mail for Exchange apps?
4. Skype, G+ Hangouts, Google Talk, Voice and video works on both?
Please add/correct any other big differences. I'll make a table and put it up on Wikipedia once we have the notable differences, that could cause issues with international use.
incidentflux said:
So the notable differences are...
1. The AT&T ROM doesn't allow band switching or manual carrier search and selection. While the Rogers ROM does not have this restriction?
2. AT&T allows WiFi tethering, while Rogers doesn't?
3. Both versions come with Mail for Exchange apps?
4. Skype, G+ Hangouts, Google Talk, Voice and video works on both?
Please add/correct any other big differences. I'll make a table and put it up on Wikipedia once we have the notable differences, that could cause issues with international use.
Click to expand...
Click to collapse
2. Rogers allows WiFi tethering, while AT&T doesn't?
Just that.
santimaster2000 said:
2. Rogers allows WiFi tethering, while AT&T doesn't?
Just that.
Click to expand...
Click to collapse
So both carriers allow WiFi tethering? I haven't personally tested either so I can't be sure.
incidentflux said:
So both carriers allow WiFi tethering? I haven't personally tested either so I can't be sure.
Click to expand...
Click to collapse
You are blind or something ?
2. Rogers allows WiFi tethering, while AT&T doesn't
santimaster2000 said:
2. Rogers allows WiFi tethering, while AT&T doesn't?
Click to expand...
Click to collapse
Guess you don't know that leaving a question mark on your reply might confuse people in to thinking you weren't sure?!
santimaster2000 said:
You are blind or something ?
Click to expand...
Click to collapse
No need to be rude!
How do you set 3G data only, dont want to use LTE to safe battery life.
MoreYummy said:
How do you set 3G data only, dont want to use LTE to safe battery life.
Click to expand...
Click to collapse
In mobile networks switch network mode to wcdma only.
Edit: could be hspa only, depends on your model.
4g is not lte by the way. If youre on lte it says lte not 4g
Sent from my LT28at using xda premium
lte is 4g on most roms that I have seen. Although I never used the lt28at just the lt28i and lt28h where hsdpa+ is called h+ and lte is called 4g.
There should be a toggle that you can download that will be able to click 2g 3g or 4g. I know on miui there is a toggle for that.
If you're using a Lt28at like me, you can't toggle anything but LTE. SInce the boot loader is locked it will give you the option to pick a different frequency, but will automatically revert back to LTE. Sucks.
The version i have only give me LTE data, or no data at all.
It is locked to rogers.
Can it be changed so i can use 3G only?
MoreYummy said:
The version i have only give me LTE data, or no data at all.
It is locked to rogers.
Can it be changed so i can use 3G only?
Click to expand...
Click to collapse
No. Your boot loader is most likely locked also. You can only choose LTE. The only other option is to find the APN setting for 3G and enter it in your mobile networks and choose it. It will only use 3G but your phone will always search for LTE by default. You will save some battery by going that route. I don't know what the 3G apn for Rogers would be, however or if there is one. AT&T has a separate apn for LTE and 3G. Maybe someone else here knows more...
Yea, i just found out this can not be unlock... thinking android can be unlock easily since my last 2 phones can do it.
I will find the 3g apn.
Hopefully someone can find a way to unlock it and use other rom..
Greetings,
Purchased a T-mobile samsung galaxy s 4.
I unlocked it. Tried to use Red Pocket mnvo and there is voice but no data.
So I rooted it and removed the T-mobile data usage apk and still no data.
I have spent hours trying to get data to work.
What more needs to be done to get this phone to operate on a Red Pocket or Straight Talk mnvo using AT&T towers?
I use the same settings that work in my other unlocked android phones and no luck.
What APK is responsible for preventing data to work?
Do I need to flash a new customized rom to get this to work?
Has anyone else gotton an AT&T mnvo to work on this T-Mobile Samsung Galaxy S 4?
I am still within my return period so I need to find a solution or send this phone back.
I was orginally going to use T-mobile because they seem to promise 4g here but when I got it I find out there is only 2g speeds where I live.
My post won't help .. but this is very interesting as I am going to do the same thing.
I'll definitely watch this thread.
Is any one else out there getting Data connection with other carries after unlocking and rooting there T-Mobile Samsung galaxy s 4?
Any ideas on the cause of no data?
buyslake said:
Is any one else out there getting Data connection with other carries after unlocking and rooting there T-Mobile Samsung galaxy s 4?
Any ideas on the cause of no data?
Click to expand...
Click to collapse
Try changing the network operator or the mobile network and see if your not using tmobiles instead of at&t...
Sent from my SGH-M919 using xda premium
You need to go to mobile settings and change the apn to the network you are trying to connect to also I think the phone has to be network unlocked
unlock isn't network unlock?
cwalker0906 said:
You need to go to mobile settings and change the apn to the network you are trying to connect to also I think the phone has to be network unlocked
Click to expand...
Click to collapse
I did change the network to the one I am trying to connect to.
Also, I went to cellunlocker and got an unlock code. I thought that unlocks the network? The data has worked on all my previous samsung galaxy's after using the unlock code except for this phone.
Please HELP someone!
I have been searching and cant seem to find anything... :/
I am trying to SIM Unlock my LG G Pad 8.3 Model VK810 that is Verizon and should come factory unlock I believe. I need this to be used on AT&T LTE which I have a sim card for and a tablet plan on the shared data plan.
It is on 4.2.2 baseband is m9615a-cefwtazm
I tried adding some ATT APN settings I found, but that did not help me. I think I need to Change it to GSM From CDMA somehow? I am not really sure. I can update and root if needed or whatever I need to do. I also have a samsung z3x box, but dont think it will work on the LG.
Any help would really help me out! Thank you in advance.
jaredlappa said:
I have been searching and cant seem to find anything... :/
I am trying to SIM Unlock my LG G Pad 8.3 Model VK810 that is Verizon and should come factory unlock I believe. I need this to be used on AT&T LTE which I have a sim card for and a tablet plan on the shared data plan.
It is on 4.2.2 baseband is m9615a-cefwtazm
I tried adding some ATT APN settings I found, but that did not help me. I think I need to Change it to GSM From CDMA somehow? I am not really sure. I can update and root if needed or whatever I need to do. I also have a samsung z3x box, but dont think it will work on the LG.
Any help would really help me out! Thank you in advance.
Click to expand...
Click to collapse
As it seems you are comfortable messing with your APN settings that should be all you will need to do. The device is locked to specific wireless frequencies but luckily for you at &t uses the same LTE frequencies. You will need to have root access in order to write your APN settings though, check the forums for information on that. Finally make sure that the sim you have is compatible with your tablet data plan, and your APN settings should be as follows for mobile data only.
APN: BROADBAND
MCC: 310
MNC: 410
uprightbass360 said:
As it seems you are comfortable messing with your APN settings that should be all you will need to do. The device is locked to specific wireless frequencies but luckily for you at &t uses the same LTE frequencies. You will need to have root access in order to write your APN settings though, check the forums for information on that. Finally make sure that the sim you have is compatible with your tablet data plan, and your APN settings should be as follows for mobile data only.
APN: BROADBAND
MCC: 310
MNC: 410
Click to expand...
Click to collapse
Happen to have a link for a Root tutorial and ROM that is good and stable for my Vk810? Will the V500 work with my pad?
I was looking at this one: http://forum.xda-developers.com/showthread.php?t=2660676
Thank you.
jaredlappa said:
Happen to have a link for a Root tutorial and ROM that is good and stable for my Vk810? Will the V500 work with my pad?
I was looking at this one: http://forum.xda-developers.com/showthread.php?t=2660676
Thank you.
Click to expand...
Click to collapse
I do not, I am sure you will find something if you look around. The V500 and V510 methods are not compatible. There is a method for yours though along with a custom recovery in the works. You may even have a custom rom in the near future.
P.S. this topic belongs in Q/A and not development.
uprightbass360 said:
I do not, I am sure you will find something if you look around. The V500 and V510 methods are not compatible. There is a method for yours though along with a custom recovery in the works. You may even have a custom rom in the near future.
P.S. this topic belongs in Q/A and not development.
Click to expand...
Click to collapse
Why would it belong in Q/A? If I am having to root and unlock it or do custom recovery? Isn't that with development?
Sorry if I have posted in the wrong place.
Here is the link I found for Rooting: http://forum.xda-developers.com/showthread.php?t=2703825
From researching it looks like it will work with the VK810.
This was also newly released: http://forum.xda-developers.com/showthread.php?t=2726707
But there are no custom roms that I have found yet.
So, I should Root this and then change the APN settings to what you told me and my ATT SIM would work?
Thank you!
jaredlappa said:
Why would it belong in Q/A? If I am having to root and unlock it or do custom recovery? Isn't that with development?
Sorry if I have posted in the wrong place.
Here is the link I found for Rooting: http://forum.xda-developers.com/showthread.php?t=2703825
From researching it looks like it will work with the VK810.
This was also newly released: http://forum.xda-developers.com/showthread.php?t=2726707
But there are no custom roms that I have found yet.
So, I should Root this and then change the APN settings to what you told me and my ATT SIM would work?
Thank you!
Click to expand...
Click to collapse
I haven't read much about i0root but it looks like it will work. Now the next part is not certain weather or not it will work, but I have seen tablets able to run on other networks that are unlocked. As long as Verizon did not implement any extra protection you should be able to use an at&t sim that is enabled for tablet data.
Once you are rooted go pick up es file explorer and navigate to /system/etc/apns-conf.xml . Make sure that before you change anything that you make a copy and name it something else so you can find it again if you have to go back. Open the file using the text editor. You can get rid of the other apns and just put your new one in there and give it a reboot. It should kick right on after you reboot. Good luck!
uprightbass360 said:
I haven't read much about i0root but it looks like it will work. Now the next part is not certain weather or not it will work, but I have seen tablets able to run on other networks that are unlocked. As long as Verizon did not implement any extra protection you should be able to use an at&t sim that is enabled for tablet data.
Once you are rooted go pick up es file explorer and navigate to /system/etc/apns-conf.xml . Make sure that before you change anything that you make a copy and name it something else so you can find it again if you have to go back. Open the file using the text editor. You can get rid of the other apns and just put your new one in there and give it a reboot. It should kick right on after you reboot. Good luck!
Click to expand...
Click to collapse
I have an LG G PAD 8.3 VK810 Verizon that I am trying to root in order to SIM unlock from Verizon to ATT.
I have installed the Drivers packages here and it finds the drivers in USB Modes: Charge tablet and media sync fine, but when I go to Internet Connection mode and choose ethernet it can not find the following drivers: CDC ECM, CDC SERIAL, AND 3 THAT SAY LGE ANDROID PHONE.
Any ideas on how to get these drivers installed to try the next step? I tried to go ahead and run the iroot program but it can not find the device.
Thank you for the help.
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
That's awesome. I love what tmobile is doing to the phone industry. I love their aggressive stance now on grabbing customers.
Sent from my Nexus 5
jlczl said:
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thx for the tip. The tablet is set to LTE mode and since T-Mobile LTE has the same band with Verizon LTE. It definitely works on T-Mobile.
For AT&T, no luck even if rooted. I used Radio Switcher app to go to the Tablet Info in Testing Mode. But it displays error message "This application does not work on this device".
ttn1185 said:
Thx for the tip. The tablet is set to LTE mode and since T-Mobile LTE has the same band with Verizon LTE. It definitely works on T-Mobile.
For AT&T, no luck even if rooted. I used Radio Switcher app to go to the Tablet Info in Testing Mode. But it displays error message "This application does not work on this device".
Click to expand...
Click to collapse
I rooted and popped in an AT&T sim card and it let's me put in the APN fine.
Sent from my HTC One_M8 using XDA Free mobile app
Skizzy034 said:
I rooted and popped in an AT&T sim card and it let's me put in the APN fine.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
But that is not my problem. The tablet doesn't pick up AT&T signal
ttn1185 said:
But that is not my problem. The tablet doesn't pick up AT&T signal
Click to expand...
Click to collapse
Easy...
Vk810 supports lte bands 4(aws) and 13 (700mhz block c), bands that Verizon uses
T-Mobile uses band 4 for lte mainly, will use band 2 (1900) and 12 (700 MHz block a) in the future as well. Vk810 will work on T-Mobile wherever tmobile has LTE right now (with band 4)
Att uses band 4, 2 (1900), 17(700mhz block b) and 30(2300mhz). Vk810 will only work on att if at uses band 4. If att only used band 2 in your area, your att phone (which supports band 2) will show LTE, but vk810 won't work
I don't know if there is a map showing which bands att uses in your area. There is a spectrum map showing who owns which band in which region, but no guarantee that att has active cell sites
http://specmap.sequence-omega.net
Tmobile sim on verizon g pad
jlczl said:
I have installed a T-Mobile SIM card in my LG GPad 8.3 LTE so I could get the free gig of data they offer existing customers. It worked without rooting. All I did was add a new APN with the proper T-Mobile settings and I was able to surf. Did it right there at the T-Mobile store with the rep to verify it would work before I added the data line to my account.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How were you able to set up up the G Pad with the tmobile sim ? I went to the tmobile store and they were not able to get service running. What settings did you use ? Any help would be appreciated.
jlanderos93 said:
How were you able to set up up the G Pad with the tmobile sim ? I went to the tmobile store and they were not able to get service running. What settings did you use ? Any help would be appreciated.
Click to expand...
Click to collapse
you need to insert sim, reboot device (it'll prompt you to)
then you need to add the t-mobile APNs to the device
the settings below should work
http://forum.xda-developers.com/showthread.php?t=2240233
paperWastage said:
you need to insert sim, reboot device (it'll prompt you to)
then you need to add the t-mobile APNs to the device
the settings below should work
http://forum.xda-developers.com/showthread.php?t=2240233
Click to expand...
Click to collapse
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
mrgj said:
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
Click to expand...
Click to collapse
what region/location are you in?
believe that circle = battery indicator, not network indicator.... full circle = 100% battery, otherwise not 100% battery
mrgj said:
I see people here say this tablet is unlocked. I rooted & inserted an at&t sim, but not working. It shows a greyed out singnal bar and a circle next to it. Then I edited build.prop ro.build.target_operator=VZN to OPEN. Now the circle is gone leaving a greyed out signal bar with small red x above it. I'm on 4.2.2. Can someone elaborate?
Click to expand...
Click to collapse
I'm not sure if this works on at&t. Mine is working on T-Mobile. All I did was insert the T-Mobile SIM and APN settings for it to work.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
jlczl said:
I'm not sure if this works on at&t. Mine is working on T-Mobile. All I did was insert the T-Mobile SIM and APN settings for it to work.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
as I said before...
this device is unlocked... it accepts any SIMs, and works w/ any band 4/13 network
AT&T's network accept any device that's approved for GSM/LTE spec, and compatible with their band 2/4/17/30 network.
AT&T doesn't have band 4 everywhere.. for example, no band 4 in nyc region.... this device won't work on at&t in nyc
paperWastage said:
as I said before...
this device is unlocked... it accepts any SIMs, and works w/ any band 4/13 network
AT&T's network accept any device that's approved for GSM/LTE spec, and compatible with their band 2/4/17/30 network.
AT&T doesn't have band 4 everywhere.. for example, no band 4 in nyc region.... this device won't work on at&t in nyc
Click to expand...
Click to collapse
LOL, I know it's unlocked. I'm using it on T-Mobile without a problem. And yes, I read your previous post. I was just answering what I personally know firsthand.
Sent from my HTC6525LVW using XDA Premium 4 mobile app
My friends has a g920p and wants to enable some bands so lte from telcel can work now he has only H+. Can that be done. I know that the s3 can with some magic. Thanks
Enviado desde mi SM-N920C mediante Tapatalk
Just put the phone on automatic in mobile network settings and set up two apns one for hspa and another for lte but make sure the lte apn has the bearer option set to lte the other just leave it how it is.
Didnt get it my friend.... here in mexico we use same apn for 3G or 4G LTE. We just need a sim v6.x and will get the lte bands.
Enviado desde mi SM-G920F mediante Tapatalk
george241312 said:
Just put the phone on automatic in mobile network settings and set up two apns one for hspa and another for lte but make sure the lte apn has the bearer option set to lte the other just leave it how it is.
Click to expand...
Click to collapse
Can you explain this a little more im using sprint on tmobile and only getting h+ also
bighleo114312 said:
My friends has a g920p and wants to enable some bands so lte from telcel can work now he has only H+. Can that be done. I know that the s3 can with some magic. Thanks
Enviado desde mi SM-N920C mediante Tapatalk
Click to expand...
Click to collapse
I know how to do this, but you would need to have the MSL number, if you don't then Google idoneapps, this guy sells an app that unlocks phone and extract that number.
So i need the msl number so how can i get it. Friends phone is already unlock.
Enviado desde mi SM-G920F mediante Tapatalk
MSL number is needed to edit data settings in sprint hidden menu. Install shortcut lite master and then search for PST, launch that application. Then look for ##Data#menu. You'll see there if your LTE is enabled or not. If it is not the only way to enable it is having MSL number.
Hidden Menu
there is no need for app for shortcut. Go to setting and go to Activate this device. Phone will load some info then look at top right for MORE. Click on it then click on PST. This will take to hidden menu,
To get LTE working all you have to do is create two separate APN's one with your regular APN settings and another that is identical APN settings but on the "Bearer" setting put it on LTE and you're good to go also make sure your phone is set to automatic and not gsm / umts
Sent from my SM-G920P using XDA Free mobile app
Also the phone will automatically switch to the apn that's needed. No need to keep switching apns
Sent from my SM-G920P using XDA Free mobile app
george241312 said:
Also the phone will automatically switch to the apn that's needed. No need to keep switching apns
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
what you stated here is correct. but have you tried it yourself?
I did, but there issue with send text messages. incoming sms works, outgoing - no.
there is no need to set to automatic. in service menu there is point where you can set preferred network type LTE_GSM_UMTS., but again, sms does not work.
fixmewireless said:
what you stated here is correct. but have you tried it yourself?
I did, but there issue with send text messages. incoming sms works, outgoing - no.
there is no need to set to automatic. in service menu there is point where you can set preferred network type LTE_GSM_UMTS., but again, sms does not work.
Click to expand...
Click to collapse
Works perfect for me I'm using T-Mobile it does not even switch to 3g when sending a msg idk why yours is not working I'm on oh1 stock no root maybe if you have root it can screw things up because different kernel?
Sent from my SM-G920P using XDA Free mobile app
george241312 said:
Works perfect for me I'm using T-Mobile it does not even switch to 3g when sending a msg idk why yours is not working I'm on oh1 stock no root maybe if you have root it can screw things up because different kernel?
Sent from my SM-G920P using XDA Free mobile app
Click to expand...
Click to collapse
no root. i`m on stock oh1. i`m on metro pcs.
fixmewireless said:
no root. i`m on stock oh1. i`m on metro pcs.
Click to expand...
Click to collapse
No clue maybe do ##72786# it will reset the phones modem settings and it will nag about activation again and relock the phone but I did it since I can unlock it myself again and never had an issue.
Weird thing is that my phone after unlock it wanted activation popup and then it actually went through and it went away with my T-Mobile sim.
Sent from my SM-G920P using XDA Free mobile app
sadfsadf
Ok found something out for some reason if you do not get LTE after setting it to Automatic switch to LTE/CDMA let it reboot and Reswitch it to Automatic reboot again then LTE+GSM_WCDMA should work.
Do you mean in service mode select cdma/lte then reboot and then go back to service mode n select gsm/wcdma/lte? Because ive been trying that fkr hkurs since reading your post lol. If this works your a beast . We need a gsm rom for this phone tho
george241312 said:
Ok found something out for some reason if you do not get LTE after setting it to Automatic switch to LTE/CDMA let it reboot and Reswitch it to Automatic reboot again then LTE+GSM_WCDMA should work.
Click to expand...
Click to collapse
George, do you have a legit way to get lte working on our device ? I haven't seen any proof from anyone claiming lte working on att or tmobile.
george241312 said:
Ok found something out for some reason if you do not get LTE after setting it to Automatic switch to LTE/CDMA let it reboot and Reswitch it to Automatic reboot again then LTE+GSM_WCDMA should work.
Click to expand...
Click to collapse
hmmm, been in the same boat with T-Mobile and a G920P, with only 3G being picked up but after switching it to automatic, it picked up LTE! Thanks for the poiter. However, have you been able to get MMS enabled or working as I seem to have issues with that and not sure why it isn't downloading the messages. Not sure if I need to give T-Mo a call and get something enabled or what. BTW, how did you manage to make that annoying activation screen go away as the moment I got it unlocked and popped in my sim card, it can't ever activate, but works fine though
any one succeeded in unlocking bands
Has anyone had any success enabling additional bands on a Sprint S6? Basically the bands it comes unlocked with are useless for Europe 4g and would love to unlock bands 3, 7, 20, 28, however 3 & 7 would be enough.
jeff83nz said:
Has anyone had any success enabling additional bands on a Sprint S6? Basically the bands it comes unlocked with are useless for Europe 4g and would love to unlock bands 3, 7, 20, 28, however 3 & 7 would be enough.
Click to expand...
Click to collapse
Same here. seems to me Samsung does not give us open source to edit Exynos settings. As I'm aware, our phones' hardware is capable to get those bands