Develop Bugs

Sw2 just shows clock. Nothing else dont work

Hello, I just bought sw2 and pair with phone (all ok) then update to newest version sw2 (without ask).
So, watch wont go to home screen. When I press home screen button or double power button, ws2 just vibrate, go black, disconect from phone and then again show clock and connect with phone.
Make some video https://youtu.be/OvINnCyDd-U
I try this http://forum.xda-developers.com/smartwatch-2/help/solution-bricked-sw2-t3172226
But when pair with phone sw2 download update and still the same.
Maybe someone have any ideas what more I can do?
Sorry for bad english :/

Seem faulty watch when I see the screen going blank after press button

I think the same. Sad... Thank you

MTCB-MD

Hi all! I am a owner of not well known MTCB-MD and have a few issues with it. Unit was updated to Malaysk rom for RK3066 android 4.4.4 and mcu is updated from MTCB-MD-1.83V to MTCB-MD-2.67V.
First problem is that power buton is not working. Cannot turn it off (it turns on and off via car key), and can´t make selection in recovery (reboot, restore, update, factory reset...). When MTC is on and I push power button it acts like HOME button (and I tried with all launchers).
Second thing is that 3 keys on the right are not working at all, and buttons on the left are remaped without any sense, luckly disc eject is displayed on screen, it is only way to eject CD/DVD.
Third thing is about Wi-Fi. Sometimes it turns on and immediately connects to network, sometimes it is stucked on Turning on Wi-Fi, sometimes it drops connection with phone which is 20cm away from unit.
Any idea how to roll back to original android version and where to find mcu version 1.83? And how to even upgrade/downgrade it when i can´t select any option in Recovery mod???
THANKS IN ADVANCE FOR YOUR RESPONSE!

blackwood91 said:
Hi all! I am a owner of not well known MTCB-MD and have a few issues with it. Unit was updated to Malaysk rom for RK3066 android 4.4.4 and mcu is updated from MTCB-MD-1.83V to MTCB-MD-2.67V.
First problem is that power buton is not working. Cannot turn it off (it turns on and off via car key), and can´t make selection in recovery (reboot, restore, update, factory reset...). When MTC is on and I push power button it acts like HOME button (and I tried with all launchers).
Second thing is that 3 keys on the right are not working at all, and buttons on the left are remaped without any sense, luckly disc eject is displayed on screen, it is only way to eject CD/DVD.
Third thing is about Wi-Fi. Sometimes it turns on and immediately connects to network, sometimes it is stucked on Turning on Wi-Fi, sometimes it drops connection with phone which is 20cm away from unit.
Any idea how to roll back to original android version and where to find mcu version 1.83? And how to even upgrade/downgrade it when i can´t select any option in Recovery mod???
THANKS IN ADVANCE FOR YOUR RESPONSE!
Click to expand...
Click to collapse
In the settings/factory settings/ there is an option for button layout. Change it to what works with your setup.
Contact your seller or manufacturer for files.

I have already tried all button layout options but nothing changes.
UPDATE: This morning new problem came out. MCU starts when I start engine, display logo, boot to homescreen, and after few seconds starts again displaying VW logo and it´s stuck on it...
Would it help to connect it to laptop via USB-A/USB-A cable and reinstall software/firmware with RK software?

SW3 won't start

Well a few days ago, like 2 weeks ago, I thougt I lost my SW3 (I use it w / o leash because it broke and there's no replacement for the stainless steel one) but actually it was lost on my travel bag xD
After plug in again it started to charge, but when I tried to turn on (after reach 100%), after the sony and SW3 logo, it turns off, like it has a problem at boot. I tried to repair via Xperia Companion and the process was succesful, but the watch just gets stuck on the same SW3 logo.
Now I think is the battery, but I'm really hoping is not, there are any suggestion guys about what could be happening?

Is it stuck at the 4 dots spinning? If So I have the same problem, I have tried a factory reset, updating the rom via push commands etc I have brought a new SWR50 thats working with ADB debugging enabled this time (Didn't do it on the last one) my question hopefully will help the OP as well can I take a complete clone/rom backup from the working watch then push that to the broken watch (Bare in mind no debugging enabled on the broken one) Also to the OP have you held down the power button to get to the fastboot menu and factory reset/recovery settings? if not then you turn off the watch, press and hold the power button until the "insert usb now" shows, you then press the power button quickly twice to access the recovery menus

The Watergod said:
Is it stuck at the 4 dots spinning? If So I have the same problem, I have tried a factory reset, updating the rom via push commands etc I have brought a new SWR50 thats working with ADB debugging enabled this time (Didn't do it on the last one) my question hopefully will help the OP as well can I take a complete clone/rom backup from the working watch then push that to the broken watch (Bare in mind no debugging enabled on the broken one) Also to the OP have you held down the power button to get to the fastboot menu and factory reset/recovery settings? if not then you turn off the watch, press and hold the power button until the "insert usb now" shows, you then press the power button quickly twice to access the recovery menus
Click to expand...
Click to collapse
I forgot about this thread lol
thanks dude!, A couple times it reached the spinning dots, but not always, sometimes it turned off on the SW3 logo before the dots appear, and actually I tried all those things you mentioned, but it didn't work, also I think my watch is (even more) screwed now xD...
Trying to do a second repair on Xperia Companion, the watch got turned off in mid repair, lending obviously on an error, and also losing the ability of do offline charge so once the battery reach 0, is over...
now when I plug in just stays on the SW3 logo, I still can go to connect USB screen and go to the two clicks menu (and stays on), but every time I try a repair, in the middle of the process disconnects and turns off, I don't know exactly why only when is plugged on the repair process it turns off, even pluged in the PC w/o repair stays connected all the time... bad thing is I don't know if is charging or not, so could stop working anytime

Have you tried to push the update through adb recovery mode?

The Watergod said:
Have you tried to push the update through adb recovery mode?
Click to expand...
Click to collapse
every day I'm more convinced the watch is screwed
If I turn on the watch stays on the SW3 logo all the time (it seems offline charge works after all), I even can go to the "insert USB" screen and stays on all the time, but when I try to push something to the watch, always disconnects, turns off and the process obvioulsy gets interrumpted, I'm losing my hopes xD
I'm using the original charging wire, but tried with other working ones

my sister bought me this smart watch , it came on long enough to program a few this after I charge it and then 10 minutes later it shut off and now it won't come back on or power up , what should I do ?

I have a weird problem with my sw3. When I plugin my watch to a charger nothing shows up but the watch gets heated up. But when I connect it to PC it just keeps turning on and off. Tried various methods available on this site but none of them worked.

OnePlus 5t Pairing Requests

I have the OnePlus 5t and recently I bought the redmi airdots (Bluetooth 5.0 earphones) and I have some troubles to pair them. Every time i connect to them I get a notification asking me to pair and connect (pairing request), when I press yes, a pop up message appear asking to pair and connect again, then a press yes and it connects normally. the thing is, I had another Bluetooth headset from xiaomi too and when i simply turn on the headset it automatically connects without prompting to pair and connect like the airdots.
my question is, can I get rid of this notification and pop up message asking to pair? I would like to simply turn on my earphones and it automatically connect to my phone without the need to every time confirm to pair (since the earphones already are paired).
I already cleared the cache in the bluetooth app and reset the phone, but still nothing.

I had the same issue as you and this method solved the problem:
Procedure: STEP_1. Put your Airdrops in the box, make sure that its charged. Delete airdots from your bluetooth device in your phone.
STEP_2. Take out both of your Airdrops from box
STEP_3. Turn off both of Airdrops by pressing and keeping the button on it for 5 seconds (until you see red light)
STEP_4. Perform 2 kinds of reset (reset of stored Bluetooth device and reset of connection between both Airdrops headphones) To make this reset, press and hold the button on both airdrops for 20seconds (headphone have to blink after 10seconds and 20seconds) don't release the buttons until you don't see second blinking.
STEP_5. Turn on your Airdrops by pressing and holding the button on both of it for 5seconds or put it in box and take it out. (when you take it out from box they will automatically turn on).
After done restart, on right headphone, you have to see blinking white light but on the left one, you have to see no light. It's mean that there is connection between headphones, and right headphone is waiting for connection with the phone.

mazzidev said:
I had the same issue as you and this method solved the problem:
Procedure: STEP_1. Put your Airdrops in the box, make sure that its charged. Delete airdots from your bluetooth device in your phone.
STEP_2. Take out both of your Airdrops from box
STEP_3. Turn off both of Airdrops by pressing and keeping the button on it for 5 seconds (until you see red light)
STEP_4. Perform 2 kinds of reset (reset of stored Bluetooth device and reset of connection between both Airdrops headphones) To make this reset, press and hold the button on both airdrops for 20seconds (headphone have to blink after 10seconds and 20seconds) don't release the buttons until you don't see second blinking.
STEP_5. Turn on your Airdrops by pressing and holding the button on both of it for 5seconds or put it in box and take it out. (when you take it out from box they will automatically turn on).
After done restart, on right headphone, you have to see blinking white light but on the left one, you have to see no light. It's mean that there is connection between headphones, and right headphone is waiting for connection with the phone.
Click to expand...
Click to collapse
This fixed the problem. Thank you!

Mi 10T Lite, alexa hands-free mode

Hi everyone,
I have configured hands-free mode on my phone but after a while stop working (if I say "alexa" nothing happen). Then I configure again and alexa works as it should but after a while stop working again.
Anyone facing the same problem?

1ce8reaker said:
Hi everyone,
I have configured hands-free mode on my phone but after a while stop working (if I say "alexa" nothing happen). Then I configure again and alexa works as it should but after a while stop working again.
Anyone facing the same problem?
Click to expand...
Click to collapse
Yep doesn't work for me either
It will work the first time then the 2nd time you see the location icon appear on the status bar and nothing happens
If you press the alexa mic icon manually it will work
What I ended up doing was assigning the long press of the power button to alexa so now when I long press it it acts as my assistant and brings up the alexa prompt eliminating the need to say a key word to open alexa. (Hold the power button down even longer for the usual power options)