[Q] LG system UI stopped - LG Optimus G Pro

Hi guys
i accidentally flashed wrong kernel along with rom on LG G Pro F240l
Kernel was for E980 so i could not boot my phone
then i put it download mode and flashed with KDZ file to stock rom
all went well untill phone Started for first time and keeps popping system Ui stopped alone with other processes
Please help my out
I am very confuse

Tauqirr said:
Hi guys
i accidentally flashed wrong kernel along with rom on LG G Pro F240l
Kernel was for E980 so i could not boot my phone
then i put it download mode and flashed with KDZ file to stock rom
all went well untill phone Started for first time and keeps popping system Ui stopped alone with other processes
Please help my out
I am very confuse
Click to expand...
Click to collapse
If you've flashed a KDZ through download mode, then it can't be the improper e980 flash that's causing it. Maybe the KDZ file you downloaded wasn't complete or had an error -- perhaps try downloading again, then reflashing? If that doesn't work, try a different version KDZ for the 240L and see if that one has the same error.

Related

[Q] LG G3: Flashing Stock Firmware - Errors

My Question: What Am I Doing Wrong?
The Problem:
Yesterday I decided I wanted to Install MIUI 5 on my LG G3 (AT&T, D850). Not realizing that MIUI Doesn't suppport my phone's variant (D850), I proceeded to accidentally install the International version on my phone. (Which is model D855 and Replaced my kernel with the International variant.) When I tried booting it up, all i got was 10 Minutes of the "LG" logo, then a Kernel Panic.
Not worrying about it too much, I knew i had all the tools necessary to Re-Flash stock Firmware.
Wrong.
When I tried re-installing the D850 firmware, I got "Download Failed."
Still not too worried, I decided to download the International Version .tot file, and try flashing that.
This time I got further, but After it reached 6%, I got "Download Failed" again because of a "Partition Change Fa..." (It's cut off, But i'm assuming that last word is 'Fail')
((This "Download Failed" came just after "LAF: Bin_User_mode", If that helps in any way.))
I have no idea what to do. I tried uisng the .kdz Method also, but It failed and then I realized that I was using the LG G2's .KDZ File. Is it worth downloading the .KDZ File for the LG G3 and Trying again?
Please Help!
Thanks! :good:
Hi there,
Please wait until mods will move this thread to the device specific forum.
Stand by

[Q] Help!! - LG G3 stuck in download mode

Hi guys I'm a newbie here and this is my first time posting.
I was trying to flash stock on my LG G3 but I made a really really stupid mistake. I used the flashtool found over here at http://forum.xda-developers.com/showthread.php?t=2799647 but I had used the wrong tot file. Now my phone is stuck in download mode. I don't think my phone is hard bricked because it still boots up but only to the download mode no matter what I press. I also can't access my custom recovery now. I have tried flashing with kdz file for my phone using the LG Flash tool 2014 but on the LG Mobile Support Tool the progress bar goes up to 10/11% during the s/w update and I get an error after waiting for half an hour and the progress bar on my phone's firmware update screen only goes up by 2% at most. I can't find the tot file for my phone version to flash with so I'm stuck here. Help please?
phone version : v20g-sea-xx
squirmycord said:
Hi guys I'm a newbie here and this is my first time posting.
I was trying to flash stock on my LG G3 but I made a really really stupid mistake. I used the flashtool found over here at http://forum.xda-developers.com/showthread.php?t=2799647 but I had used the wrong tot file. Now my phone is stuck in download mode. I don't think my phone is hard bricked because it still boots up but only to the download mode no matter what I press. I also can't access my custom recovery now. I have tried flashing with kdz file for my phone using the LG Flash tool 2014 but on the LG Mobile Support Tool the progress bar goes up to 10/11% during the s/w update and I get an error after waiting for half an hour and the progress bar on my phone's firmware update screen only goes up by 2% at most. I can't find the tot file for my phone version to flash with so I'm stuck here. Help please?
phone version : v20g-sea-xx
Click to expand...
Click to collapse
hi , i have the same problem.
Did you try to flash the correct .tot file again?
Check the logs for the error which is generated from LG flash tool 2014.
May be you have cross D/L error due to wrong tot file flash.

Phone won't start after CSE flashing a KDZ. Won't go nowhere other than Download Mode

Phone is LG G Pro F240L. I had the latest update (Lollipop) installed and let's just say I wasn't satisfied with it.
I flashed Kitkat KDZ like normally but it got stuck on bootloop, then I CSE flashed using the Kitkat KDZ and now it won't do anything other than go to download mode.
I would really appreciate any help to get my phone back to normal and fast. Thanks!
EDIT: I should also add that I've tried the PC suite recovery method but it says my phone's battery is too low when it's not.
UPDATE: I think I've hard bricked my phone. Damn...
tress19991 said:
Phone is LG G Pro F240L. I had the latest update (Lollipop) installed and let's just say I wasn't satisfied with it.
I flashed Kitkat KDZ like normally but it got stuck on bootloop, then I CSE flashed using the Kitkat KDZ and now it won't do anything other than go to download mode.
I would really appreciate any help to get my phone back to normal and fast. Thanks!
EDIT: I should also add that I've tried the PC suite recovery method but it says my phone's battery is too low when it's not.
UPDATE: I think I've hard bricked my phone. Damn...
Click to expand...
Click to collapse
Reflash the kdz again.before that check whether you are flashing the correct firmware of the correct model.
Now flash your kdz through lg offline flash tool.you can get that by searching in this xda forums.so even if your battery is below 60% it continues to the next step.But it is recommended to have minimum 60% of battery level.after opening lg offline flash tool you choose the kdz,then after choose cse flash.thats it.because it worked for me.or if your phone goes intlo reccovery mode,simply you can factory reset the data,perform 3 wipes(factory reset,cache and dalvik cache) and reboot.It may work sometimes.update me after u did these steps.if worked hit thanks. (i want to help you.thats why,i said what i know.)
brick my lg g pro f240....
krishna13 said:
Reflash the kdz again.before that check whether you are flashing the correct firmware of the correct model.
Now flash your kdz through lg offline flash tool.you can get that by searching in this xda forums.so even if your battery is below 60% it continues to the next step.But it is recommended to have minimum 60% of battery level.after opening lg offline flash tool you choose the kdz,then after choose cse flash.thats it.because it worked for me.or if your phone goes intlo reccovery mode,simply you can factory reset the data,perform 3 wipes(factory reset,cache and dalvik cache) and reboot.It may work sometimes.update me after u did these steps.if worked hit thanks. (i want to help you.thats why,i said what i know.)
Click to expand...
Click to collapse
mine lg g pro f240 got dead no light won't switch on after using lg flash tool 2014. after root with kit kat I'm upgrade again to lollipop after verifying 100% it stuck in download mode and do nothing...then died......
damm I'm brick my phone..plzz help

Please help me fix LG G3 D852!

In order for my D852 to work with wind i was told to use LG Flash Tool and download the a D852 dll and use a D852G tot file.
My phone says it's from telus.
when i first started to flash my phone using those 2 file, i thought it would have been easier but instead i got into a Factory Reset 2
I tried to redo the flash but now im unable to do so. I can still get into download mode, and when i turn on the phone is automatically goes into Firmware update without having to hold the volume up button.
Here is the thread
http://forums.redflagdeals.com/can-lg-g3-d852-work-wind-mobilicity-1720993/2/#post23713657
carlos1984
My phone now read's as a D852G on the buttom of flashing firmware update and now i tried every possible method of making it work..
http://imgur.com/a/9GAel
Try using the LG PC suite from the LG website to restore it...Once you get it back, root it and flash a custom rom like Fulmics if you want stock.
My phone on Fulmics 2.7 works on Wind.

problem with lg g3 bootlooping when installing stock firmware

Hi guys
LG G3 looping on boot screen every time,
I had TWRP with fulmics rom installed and one day it just shut down, i tried turning the phone on but it shows the lg booting screen and then reboot, and it goes on like that, I tried installing different roms but always the same problem, i
should mention that i tried cloudy rom and i did actually work but when booting the phone it had this problem that the wifi and bluetooth won't activate, i searched on the Web and a lot suggested that is a battery problem,
so i thought the previous rom worked well so let's change this rom,I installed a lot of roms and the boot looping problem shows up every time, so i thought **** it let's get the stock firmware,
and when resetting the phone to stock firmware it's stuck in the rebooting phase at the end, boot loop again, and now that I've lost TWRP i only have the firmware solution that is not working, this too was mentioned to be a battery problem,
and i bought a new battery and nothing have changed,
tutorials that didn't work for me : http://lgg3root.com/lg-g3-stock-factory-firmware/ http://unbrick.itcse.com/unbrick-lg-g3-stuck-on-factory-reset-2/
is there anyone can help please ?
so did you try to change the battery or not?
Dave760 said:
so did you try to change the battery or not?
Click to expand...
Click to collapse
Yes i did and the same problem persists
did you try the kdz method?
which lg do you have and what tot and dll file are you using?
Dave760 said:
did you try the kdz method?
which lg do you have and what tot and dll file are you using?
Click to expand...
Click to collapse
i have a LG G3 D855
i'm using :
tot: http://stockroms.net/file/LGG3/D855/European/BIN_LGD855AT-00-V10e-EUR-XX-JUL-08-2014-16G-0.zip
dll: http://stockroms.net/file/LGG3/D855/LGD855_20140526_LGFLASHv160.dll
you have 16 gb or 32?

Categories

Resources