[Q] KitKat for Ascend P6 in the UK - Huawei Ascend P6, Mate

Hey,
I'm a newbie to these forums and Android, have used iOS for the last 3 years and just need some help with my
new phone. So i'm in the UK and am on the b116 firmware, Jellybean (4.2.2) and I called Huawei a couple of days ago
and they say that it (the 4.4.2 update) should come out within the next couple of weeks. Thing is this is the same thing
they said in July. That's where I need your help guys. Can someone please give me the steps to how I could
update to KitKat.
P.S. I'm also new to this topic on ROMs, TWRP, flashing, etc.
Could you please help. Thank you.

http://forum.xda-developers.com/showthread.php?t=2903736
Sent from my P6-U06 using xda app-developers app

Is this how you did it?
So is this how you did it for your phone from the same firmware?
How do you flash though?
But thanks for your reply.

I was in the same boat about a month ago. There are a lot of firmwares out there. Can be very confusing. Here is what I did. I updated to b132 jb then to b512 kk. Used update app method both times through system update from SD card. I downloaded the roms from Huawei news website. Read up as much as you can. Hope it helps.
Sent from my HUAWEI P6-U06 using XDA Free mobile app

It works?
wards5150 said:
I was in the same boat about a month ago. There are a lot of firmwares out there. Can be very confusing. Here is what I did. I updated to b132 jb then to b512 kk. Used update app method both times through system update from SD card. I downloaded the roms from Huawei news website. Read up as much as you can. Hope it helps.
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
OK so i go on the huawei news site download the b132 then the next and this is with the update.app method right? And is worked? K I'll give it a try but thanks anyway so helpful!
Couldn't be more grateful.

Took me a while to find where to go after b116. Not many seemed to have that firmware version.
Sent from my HUAWEI P6-U06 using XDA Free mobile app

Where do I read up?
wards5150 said:
Took me a while to find where to go after b116. Not many seemed to have that firmware version.
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
So what should i read up on. Just the method?

The metod for updating is pretty easy as long as you dont have any data to backup or restore. Download the update file that should be named UPDATE.APP and put it in a folder named DLOAD in your sdcard. From there go to system update and select local update. It should restart the phone and do all the update on its own. After the update it will boot into system and you are ready to go. But since its recommended to go to B132 first and then to kitkat you gonna need to do this twice for both updates.
Sent from my P6-U06 using xda app-developers app

Do what the above says. There is a word document with official downloads that tells you what to do. Better to have more knowledge than just jumping in and getting it wrong. There is a thread on here somewhere that lists all official downloads. I'm sure there are links as well. Good luck.
Sent from my HUAWEI P6-U06 using XDA Free mobile app

I may seem a bit clueless
wards5150 said:
Do what the above says. There is a word document with official downloads that tells you what to do. Better to have more knowledge than just jumping in and getting it wrong. There is a thread on here somewhere that lists all official downloads. I'm sure there are links as well. Good luck.
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
So sorry to bother but where is this word doc. Have i missed it somehow?
And it may seem a bit forward but is there a lollipop update for the P6

No lollipop as yet. Can't see Huawei releasing it as this phone too old now. I'm sure someone will develop it for our phone after official cm12 is released. When you download official rom unzip the file and there should be two files one is the update app. And there should be a word doc as well. The word doc tells you how to update. I'll try to find a link for downloads I used. Might be later today though.
Link for jb rom
http://dl.huaweinews.com/Roms/Ascend-P6/B132.zip
Link for kk rom.
http://dl.huaweinews.com/Roms/Ascend-P6/B512.zip
There are later kk releases ie b634 but b512 working well for me.
Sent from my HUAWEI P6-U06 using XDA Free mobile app

What about the EMUI?
wards5150 said:
No lollipop as yet. Can't see Huawei releasing it as this phone too old now. I'm sure someone will develop it for our phone after official cm12 is released. When you download official rom unzip the file and there should be two files one is the update app. And there should be a word doc as well. The word doc tells you how to update. I'll try to find a link for downloads I used. Might be later today though.
Link for jb rom
http://dl.huaweinews.com/Roms/Ascend-P6/B132.zip
Link for kk rom.
http://dl.huaweinews.com/Roms/Ascend-P6/B512.zip
There are later kk releases ie b634 but b512 working well for me.
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
So what about the EMUI will that also automatically update? Will it have to be separate?
If so which ones do i download and how?

Azzzy said:
So what about the EMUI will that also automatically update? Will it have to be separate?
If so which ones do i download and how?
Click to expand...
Click to collapse
Yes the EMUI updates along with the system. First download and update the B132 and then the B512.

When you update to kk 512 emui 2.3 will be installed as part of update. No need to update separately.
Sent from my HUAWEI P6-U06 using XDA Free mobile app

Thanks
wards5150 said:
When you update to kk 512 emui 2.3 will be installed as part of update. No need to update separately.
Sent from my HUAWEI P6-U06 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks to everyone who helped. I'll give it a go today or tomorrow.
Fingers crossed it'll work.
Seriously i cannot thank you guys enough.

Tried it - it failed
Azzzy said:
Thanks to everyone who helped. I'll give it a go today or tomorrow.
Fingers crossed it'll work.
Seriously i cannot thank you guys enough.
Click to expand...
Click to collapse
Hey guys, I tried it out, downloading the file and then putting the UPDATE.app on my SD card's dload folder,
did the local upgrade but then on the screen it came up with, "Copying from external source(i think) failed", tried it again, "cust ... succeeded" - not sure if useful but yh why did it fail, what am I doing wrong? I've attached the contents of my SD card below but is that what is causing the problems?
When i tried to do it, it said on the first line, "This phone is LOCK state" then goes onto say "Huawei SD card fail" if it helps.

Bootloader?
Azzzy said:
Hey guys, I tried it out, downloading the file and then putting the UPDATE.app on my SD card's dload folder,
did the local upgrade but then on the screen it came up with, "Copying from external source(i think) failed", tried it again, "cust ... succeeded" - not sure if useful but yh why did it fail, what am I doing wrong? I've attached the contents of my SD card below but is that what is causing the problems?
When i tried to do it, it said on the first line, "This phone is LOCK state" then goes onto say "Huawei SD card fail" if it helps.
Click to expand...
Click to collapse
Do i need to unlock bootloader?

Was this directly to kitkat or you went with B132 first?
Sent from my P6-U06 using xda app-developers app

B132
tileeq said:
Was this directly to kitkat or you went with B132 first?
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Nope, i updated well tried to anyways to b132

Try again?
Sent from my P6-U06 using xda app-developers app

Related

[Q] advice needed on kitkat 4.4.2

hi guys
how do I install the kitkat 4.4.2 beta ?
as in does my phone need to be rooted ??
also how do I get the google apps afterwoods
and are there any risk's in bricking the phone ?
one more thing how do I go back to B125 afterwoods
thanks
jason
jasonr2000 said:
hi guys
how do I install the kitkat 4.4.2 beta ?
as in does my phone need to be rooted ??
also how do I get the google apps afterwoods
and are there any risk's in bricking the phone ?
one more thing how do I go back to B125 afterwoods
thanks
jason
Click to expand...
Click to collapse
Best and first and last adivicels.do not open topic use search otpions and read read read.Thanks..
Its easy to say read other posts
I think my question is valid when people are on about rooting and i dont want to root my phone lol
so question still remains
Sent from my HUAWEI P6-U06 using xda app-developers app
jasonr2000 said:
Its easy to say read other posts
I think my question is valid when people are on about rooting and i dont want to root my phone lol
so question still remains
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Just read pls..
Never need root if you use offical or original test firmware.(Only if you want another region rom flash (BRICK warning!) )
kabirjedi said:
Just read pls..
Never need root if you use offical or original test firmware.(Only if you want another region rom flash (BRICK warning!) )
Click to expand...
Click to collapse
ive seen the kitkat beta rom I think it is on here
and they are mostly on about routing the device
(hence why I don't want to do anything and brick the device)
http://forum.xda-developers.com/showthread.php?t=2630935
this is the rom ive seen would love to give it a go but scared id brick the device somehow (being a total newbie when it comes to flashing Huawei devices)
jasonr2000 said:
ive seen the kitkat beta rom I think it is on here
and they are mostly on about routing the device
(hence why I don't want to do anything and brick the device)
http://forum.xda-developers.com/showthread.php?t=2630935
this is the rom ive seen would love to give it a go but scared id brick the device somehow (being a total newbie when it comes to flashing Huawei devices)
Click to expand...
Click to collapse
Yes You Can Flash Using dload Method. No need To Root And Kitkat Beta Is Safe To Install No One Has Reported Bricked Thr Device Flashing Kitkat.
Thabks for the reply
Do i need root to get the google playstore ?
Sent from my HUAWEI P6-U06 using xda app-developers app
jasonr2000 said:
Thabks for the reply
Do i need root to get the google playstore ?
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
No Root Need You Have To Flash TWRP Recovery for That. That Is Also Void Warranty But You Can Reflash Stock Recovery When Ever You Want And Your Mobile Become Stock Again.
Can I Ask Whats Your Problem With ROOT?? Root A Mobile Is Not Dangerous.
Its just ive never rooted a phone and wouldnt know how to begin
Hence why i thought id ask here
Sent from my HUAWEI P6-U06 using xda app-developers app
jasonr2000 said:
Its just ive never rooted a phone and wouldnt know how to begin
Hence why i thought id ask here
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
ok so ive rooted my phone now
but how do I install twrp ??
jasonr2000 said:
ok so ive rooted my phone now
but how do I install twrp ??
Click to expand...
Click to collapse
Please take a look here: http://forum.xda-developers.com/ascend-p6/orig-development
husen4u said:
No Root Need You Have To Flash TWRP Recovery for That. That Is Also Void Warranty But You Can Reflash Stock Recovery When Ever You Want And Your Mobile Become Stock Again. My phone says sd card update fail when i try update to kitkat beta
Can I Ask Whats Your Problem With ROOT?? Root A Mobile Is Not Dangerous.
Click to expand...
Click to collapse
My phone says update fail when i try upgrading to kitkat beta
Carl Hlongwa said:
My phone says update fail when i try upgrading to kitkat beta
Click to expand...
Click to collapse
Make sure of several things:
1. Put the UPDATE.APP in a dload folder on your sd card.
2. Make sure the sd card is formatted as fat32.
3. Make sure that no USB is plugged in while you try to update.
4. Make sure that you have more than 50% battery.
bokchoi2020 said:
Make sure of several things:
1. Put the UPDATE.APP in a dload folder on your sd card.
2. Make sure the sd card is formatted as fat32.
3. Make sure that no USB is plugged in while you try to update.
4. Make sure that you have more than 50% battery.
Click to expand...
Click to collapse
Advice: put dload folder on internal memory.
Sent from my P6-U06 using XDA Premium 4 mobile app
bokchoi2020 said:
Make sure of several things:
1. Put the UPDATE.APP in a dload folder on your sd card.
2. Make sure the sd card is formatted as fat32.
3. Make sure that no USB is plugged in while you try to update.
4. Make sure that you have more than 50% battery.
Click to expand...
Click to collapse
Okay let me explain further when i upgrade to firmware b125 or b111 i put the UPDATE.APP in the dload folder on my sdcard and it upgrades but when i try it with the kitkat beta its says sd card update fail
Charles2468 said:
Okay let me explain further when i upgrade to firmware b125 or b111 i put the UPDATE.APP in the dload folder on my sdcard and it upgrades but when i try it with the kitkat beta its says sd card update fail
Click to expand...
Click to collapse
5. Make sure you downloaded the file properly.
warea said:
5. Make sure you downloaded the file properly.
Click to expand...
Click to collapse
Im know that i downloaded the file properly, is there anything else i can try
Charles2468 said:
Okay let me explain further when i upgrade to firmware b125 or b111 i put the UPDATE.APP in the dload folder on my sdcard and it upgrades but when i try it with the kitkat beta its says sd card update fail
Click to expand...
Click to collapse
Like I said: move the dload folder with update.app to internal memory. Might help fix the issue
Sent from my GT-P3110 using xda app-developers app
lootjelo said:
Like I said: move the dload folder with update.app to internal memory. Might help fix the issue
Sent from my GT-P3110 using xda app-developers app
Click to expand...
Click to collapse
Hi i need help because i have the exact same problem, and ive tried to pu it in the dload folder in the sd card and in internal memory still says sd card update fail

[Q] Kind request

Guys, just a quick request.
I bought my P6 some weeks ago, got it already with the B120 firmware, installed Hyd52Rom V5 and TWRP for JB.
I think my battery is draining too fast, I can't watch more than 2 hours of some movie before dropping to 5% from 100%.
So, I came here hoping to install B125, allegedly more battery friendly, and KitKat + TWRP for KK. But the respective project pages are confusing on what I must have prior to the installations.
So, can I install B125, KitKat and TWRP on my current specs without any risk? As I said, my current specs are B120 firmware, Hyd53Rom V5 and TWRP for JB.
If so, whats is the correct order of install?
Thanks in advance.
So, no one?
Revert to stock recovery, update to kk beta using local update, flash twrp kk through adb, reboot to twrp and flash gapps
Sent from my P6-U06 using XDA Premium 4 mobile app
richterlevania3 said:
Guys, just a quick request.
I bought my P6 some weeks ago, got it already with the B120 firmware, installed Hyd52Rom V5 and TWRP for JB.
I think my battery is draining too fast, I can't watch more than 2 hours of some movie before dropping to 5% from 100%.
So, I came here hoping to install B125, allegedly more battery friendly, and KitKat + TWRP for KK. But the respective project pages are confusing on what I must have prior to the installations.
So, can I install B125, KitKat and TWRP on my current specs without any risk? As I said, my current specs are B120 firmware, Hyd53Rom V5 and TWRP for JB.
If so, whats is the correct order of install?
Thanks in advance.
Click to expand...
Click to collapse
Very new phone.Keep in mind new battery -bad battery.Wait minimum 1 month and and many recharg cycle.And + adivise.No change rom this time.Sorry my horror english.
kabirjedi said:
Very new phone.Keep in mind new battery -bad battery.Wait minimum 1 month and and many recharg cycle.And + adivise.No change rom this time.Sorry my horror english.
Click to expand...
Click to collapse
Also: Try not to let your battery level get below 30%... Trust me.
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
Revert to stock recovery, update to kk beta using local update, flash twrp kk through adb, reboot to twrp and flash gapps
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Instead of updating to KK beta, I can install HYD52ROM V7, based on KK, right?
Thank you for you reply.
richterlevania3 said:
Instead of updating to KK beta, I can install HYD52ROM V7, based on KK, right?
Thank you for you reply.
Click to expand...
Click to collapse
You have to get an unlocked bootloader first, which means you will have to get a Chinese firmware (B118CN, B120CN or KK Beta...). KK Beta is the safest way to go if you want to go to custom roms.
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
Also: Try not to let your battery level get below 30%... Trust me.
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you.
lootjelo said:
You have to get an unlocked bootloader first, which means you will have to get a Chinese firmware (B118CN, B120CN or KK Beta...). KK Beta is the safest way to go if you want to go to custom roms.
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's what is confusing. I'm on B120 already, but what I really want is the B125. So, there is no way to install HYD52ROM with B125?
richterlevania3 said:
That's what is confusing. I'm on B120 already, but what I really want is the B125. So, there is no way to install HYD52ROM with B125?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2570602 B120CN-B125
Sent from my P6-U06 using XDA Premium 4 mobile app
lootjelo said:
http://forum.xda-developers.com/showthread.php?t=2570602 B120CN-B125
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for your reply, will try tomorrow.
lootjelo said:
http://forum.xda-developers.com/showthread.php?t=2570602 B120CN-B125
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ok, installed B125 and rooted. I was able to install CWM in order to install TWRP as it's required. Got into CWM and selected the package I downloaded from here http://forum.xda-developers.com/showthread.php?t=2534420.
I downloaded the 2.1 and 2.0 versions. It installs fine, but when I select reboot from CWM it says my ROM may reinstall the stock recovery and asks if I want to fix it. First time I selected "No" and there were no TWRP, only stock recovery. Second time I selected "Yes, fix it", and TWRP is still not installed, so it doesn't matter what I do, it only reboots to stock recovery...
Tried this 10 times, 5 with each of the versions.
Any ideas?
richterlevania3 said:
Ok, installed B125 and rooted. I was able to install CWM in order to install TWRP as it's required. Got into CWM and selected the package I downloaded from here http://forum.xda-developers.com/showthread.php?t=2534420.
I downloaded the 2.1 and 2.0 versions. It installs fine, but when I select reboot from CWM it says my ROM may reinstall the stock recovery and asks if I want to fix it. First time I selected "No" and there were no TWRP, only stock recovery. Second time I selected "Yes, fix it", and TWRP is still not installed, so it doesn't matter what I do, it only reboots to stock recovery...
Tried this 10 times, 5 with each of the versions.
Any ideas?
Click to expand...
Click to collapse
I'm really sorry, but I never used this method. I usually flash custom roms coming from kk beta. So I wouldn't know. I just gave you a link I found. Do you have an unlocked bootloader?
Sent from my GT-P3110 using xda app-developers app
richterlevania3 said:
Ok, installed B125 and rooted. I was able to install CWM in order to install TWRP as it's required. Got into CWM and selected the package I downloaded from here http://forum.xda-developers.com/showthread.php?t=2534420.
I downloaded the 2.1 and 2.0 versions. It installs fine, but when I select reboot from CWM it says my ROM may reinstall the stock recovery and asks if I want to fix it. First time I selected "No" and there were no TWRP, only stock recovery. Second time I selected "Yes, fix it", and TWRP is still not installed, so it doesn't matter what I do, it only reboots to stock recovery...
Tried this 10 times, 5 with each of the versions.
Any ideas?
Click to expand...
Click to collapse
Ok, everything is fine now. The thing is, the projects pages are very confusing, and I didn't see we must restart the phone pressing Volume+ or Volume- a couple times when powering up the cellphone to boot into TWRP.
Someone ought to organize the projects pages better...
richterlevania3 said:
Ok, everything is fine now. The thing is, the projects pages are very confusing, and I didn't see we must restart the phone pressing Volume+ or Volume- a couple times when powering up the cellphone to boot into TWRP.
Someone ought to organize the projects pages better...
Click to expand...
Click to collapse
Glad it worked!! ^^
Sent from my P6-U06 using XDA Premium 4 mobile app

Update Pac-Man Rom

Hey There,
I've installed Pac-Man Rom on my P6 (Android 4.2.2). There are actually some bugs with this Software, so i can't see video streams on Facebook (directly stops after click on play).
I've seen there is an Update from April but i'm not able to install it. TWRP installation aborted and via GooManager the same.
What can i do to get the newest version with maybe less bugs?
Thanks a lot! Greetings
Can you tell us step-by-step what you did to update the rom?
Sent from my P6-U06 using XDA Premium 4 mobile app
Genij14 said:
Can you tell us step-by-step what you did to update the rom?
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Ive downloaded the new File manually to my Phone, rebooted to TWRP and installed it. There was an Error (I think it was something like "the signature is wrong"). So i rebooted the Phone and it stops at the Huawei Logo. No chance to repair it. I had to reinstall the older version of Pac-Man via Fastboot and (thank god) i've made a backup before installing the update, i was able to restore the phone.
Then i've tried to install the Update via GooManager. But this programm sends me to Recovery to, so i didn't try to install the new file once more.
Thats what i've tried till now. Because of the bugs in my installed Version i think it would be nice to use the new one.
Greetings and Thanks!
We don't have official Pac. See Surdu's thread in Original Development.
red-facton said:
Ive downloaded the new File manually to my Phone, rebooted to TWRP and installed it. There was an Error (I think it was something like "the signature is wrong"). So i rebooted the Phone and it stops at the Huawei Logo. No chance to repair it. I had to reinstall the older version of Pac-Man via Fastboot and (thank god) i've made a backup before installing the update, i was able to restore the phone.
Then i've tried to install the Update via GooManager. But this programm sends me to Recovery to, so i didn't try to install the new file once more.
Thats what i've tried till now. Because of the bugs in my installed Version i think it would be nice to use the new one.
Greetings and Thanks!
Click to expand...
Click to collapse
Did you try to re-download the rom and re-flash it via TWRP?
Sent from my P6-U06 using XDA Premium 4 mobile app
Yes i did, the same happened. I've flashed the older version immediately so that i didn't have to reinstall and restore all once more
The only explanation is that the zip is corrupted. Did it say the signature was wrong or signature verification failed?
Sent from my P6-U06 using XDA Premium 4 mobile app
yes it does. I redownloaded it and tried again with the same results... I think i will wait for the update to 4.4.2, hope it will be there in a few weeks... You're using it on P6 to?
I used it while I was still on JB. No problems like yours. Maybe try a different SD card ( borrow from a friend ).
Sent from my P6-U06 using XDA Premium 4 mobile app
Hello again,
I've bought a New card. The Same problem. Now ive read that i need the twrp Version 6.2.3.3. But i cant install the update. I tried to install the new version via cwm, after the installation it says update completed. The next start of twrp there is the old Version 6.2.3.0 again.
Now i don't know what to do...
Is there anyone who has an idea?
Greetings!

Huawei Mate 2 boot looping/soft brick issue

Hello, I'm having some trouble with my Huawei Ascend Mate 2 for Consumer Cellular. I recently unlocked the boot loader and rooted my phone. Things seemed to be going fine but once I tried to change my system font in an app called BusyBox, my phones screen turn on then off a couple times and restarted. Since then, the phone will power on to the Consumer Cellular boot logo but shuts off shortly after. I didnt have any custom ROMs on it and I've tried doing a factory reset in the recovery menu by holding Vol Up+Power Button and it said it finished and I selected the option to reboot and the same issue occurs. It worries me because I am unable to get a new phone and I really need it to work as soon as possible but I'm not sure what to do at this point. I tried to find the UPDATE.APP file for my phone cause I read that I can put that file on my SD card and reboot and it'll reload the original OS but I cannot find it anywhere, even Huawei's site.
Trying to keep my cool about this but it's getting frustrating and I'm kinda lost.
I do have the Android SDK and ADB drivers on my computer but I'm not sure if that would help.
Any help would be much appreciated
Is your phone the B929?
Sent from my HUAWEI Y536A1 using XDA Free mobile app
In regards to the model, its the MT2-L03
Nomad602 said:
In regards to the model, its the MT2-L03
Click to expand...
Click to collapse
What's the baseband and software version... because I may have found something for you but I don't want you to screw up your phone. It said it was for B 929
Sent from my HUAWEI Y536A1 using XDA Free mobile app
nobreak1970 said:
What's the baseband and software version... because I may have found something for you but I don't want you to screw up your phone. It said it was for B 929
Sent from my HUAWEI Y536A1 using XDA Free mobile app
Click to expand...
Click to collapse
How do I find out that information? Is it on the phone? I'm not very knowledgable about this stuff but I'm running Android 4.2.2 but in terms of the B929, I'm not sure. I've seen stuff like you mentioned but I'm unsure of what it is.
Sorry for the lack of info on my part, I tried looking for something relevant but cant find anything that fits that description.
Side note, I was able to get the recovery screen for TWRP but it looks for a zip to install but I dont have anything like that to boot it into.
Go to Settings then About Phone. Info is there.
Sent from my HUAWEI Y536A1 using XDA Free mobile app
nobreak1970 said:
Go to Settings then About Phone. Info is there.
Sent from my HUAWEI Y536A1 using XDA Free mobile app
Click to expand...
Click to collapse
Since I am kinda stuck in a bootloop and cant fully turn on the phone, I cannot find that infomation.
I am gonna check some things online
Yeah brain fart on my part I found the update.app for the ascend mate B929 not sure if it's yours.
Sent from my HUAWEI Y536A1 using XDA Free mobile app
nobreak1970 said:
Yeah brain fart on my part I found the update.app for the ascend mate B929 not sure if it's yours.
Sent from my HUAWEI Y536A1 using XDA Free mobile app
Click to expand...
Click to collapse
At least from what I've gathered, I think thats the one for the original Mate phone.
So since I've tried to go into recovery, wiped everything on the phone and the data cache and it still doesn't go past the boot screen, is the fix probably putting the correct UPDATE.APP on my SD card, then trying to boot it from an external slot? (SD card)
I've tried multiple things but I think I used the UPDATE.APP from the original Mate.
Based on the things you asked for I browsed the web for possible firmwares and found an Ascend Mate 2 firmware but it's Kit Kat and from what I've read,. the MAte 2 is going from JB to Lollipop and skipping KK. IT's the only firmware I can find that relatively close to my phone. Should I attempt to try to boot with that firmware I found or would I absolutely need the exact firmware that the phone shipped with?
Sorry for the long mesage, just wanna make sure my facts are straight.
Definitely don't want to flash the wrong update.app
I've read that this is going to lollipop and skipping kitkat too. suspicious about that one you found.
I definitely wouldn't try it until you get advice from someone more familiar with the device.
Sent from my HUAWEI Y536A1 using XDA Free mobile app
nobreak1970 said:
Definitely don't want to flash the wrong update.app
I've read that this is going to lollipop and skipping kitkat too. suspicious about that one you found.
I definitely wouldn't try it until you get advice from someone more familiar with the device.
Sent from my HUAWEI Y536A1 using XDA Free mobile app
Click to expand...
Click to collapse
I'll try to look around more online. So to your knowledge, booting the correct UPDATE.APP would typically solve the problem on more known devices?
And thanks again for the help, it's much appreciated
Definitely
Sent from my HUAWEI Y536A1 using XDA Free mobile app
Get it fixed?
Sent from my HUAWEI Y536A1 using XDA Free mobile app

[Q] Help with Update to kitkat from B119 Huawei P6 Ascend

Hi
I am wondering how I can update my P6 Ascend to Kitkat that I have seen is available. I have tried to do the update through the update on the phone but I cannot get the app to detect the files B125, B132, B510. I h8ave extracted and followed the instructions perfectly but nothing detects still
Is there another way to get the updates to work as the local Huawei does not have the 4.4.2 update ready and wont seem to for a while.
pinks666 said:
Hi
I am wondering how I can update my P6 Ascend to Kitkat that I have seen is available. I have tried to do the update through the update on the phone but I cannot get the app to detect the files B125, B132, B510. I h8ave extracted and followed the instructions perfectly but nothing detects still
Is there another way to get the updates to work as the local Huawei does not have the 4.4.2 update ready and wont seem to for a while.
Click to expand...
Click to collapse
Which version are you using now? And have you tried to put update.app in dload folder in internal memory?
Other way is updating custom Rom with custom recovery.
Sent from my HUAWEI P6-U06 using XDA mobile app
AdnanCG said:
Which version are you using now? And have you tried to put update.app in dload folder in internal memory?
Other way is updating custom Rom with custom recovery.
Sent from my HUAWEI P6-U06 using XDA mobile app
Click to expand...
Click to collapse
I am currently on B119 and trying to get to B501. I will have another try with what you have suggested. I don't want to go to a custom rom just yet as I have only had the phone 4 days.

Categories

Resources