Hey does anyone have or can point me to a guide to turn a modem.bin either into a flashable zip or flash it is shell?
Any links to the modems will help too. Thanks
Related
In order to save my phone, I need the modem flash for file t889 that can be used with Odin and not CWM. Please advise.
Unzip CWM version , you will have Zimage ( Odin file). If I'm not wrong.
simplelife said:
Unzip CWM version , you will have Zimage ( Odin file). If I'm not wrong.
Click to expand...
Click to collapse
thanks for the suggestion. However, in the zip file there's the modem.bin, and the flash_image file and a folder with other stuff. I am uncertain which one to extract. (yes, I am googling this as I ask.)
the modem.bin file is the one you need. would you mind posting a link to the CWM zip you have of the modem? been looking for it..
My experience with Odin and modem cross-flashing is that is fails before writing anything. (T889-LJ1 on T889, T889V-LJ4 on T889V and so on should work. Other partitions made with this method work flawlessly, so I'm guessing there's an additional check in the bootloader for modem images.)
Anyway, here goes. Those files were made by extracting from their respective Odin images, from Sammobile and tarring with the Cygwin tar binary.
SGH-T889V T889VVLALJ4 Odin-flashable modem image: http://www.mediafire.com/?1ielxoreoyc4nbm
Goodbye,
Darkshado
Can dis modem work with t889UVUCMK7 ? I need it badly anybody tell ? Thanks
damabib said:
Can dis modem work with t889UVUCMK7 ? I need it badly anybody tell ? Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2564430
mk7 modem
I have the extracted mk2 modem.bin from the stock tar file.
I want to flash the new modem to my wife's m919, but unfortunately I don't know how to make a flashable zip for the modem only.
Any help or leads to some knowledge specific for the m919 would be much appreciated
Thanks in advance.
BTW the mk2 modem.bin file can be found here:
https://www.dropbox.com/s/sauzqmvi6x5eblk/modem.bin
Md5 = c4b3d2dd0e24f48d208bc3987f163b5f
The file is 49.65 mb
You can't flash it through recovery. You must use Odin
My S4 Has The Sickness
DEVIANT DEVELOPMENT
alloycowboy said:
You can't flash it through recovery. You must use Odin
My S4 Has The Sickness
DEVIANT DEVELOPMENT
Click to expand...
Click to collapse
That why I was asking for help to make cwm/twrp flashable zip, so I can just flash it.
I know it's possible I just don't know where to start and was looking for someone to point me in the right direction. Thanks for your post though.
It's not possible. It has been attempted in the past. All modems are to be installed using Odin. Look in the forums, someone made a flashable zip for the modem. Won't work.
Good luck though
My S4 Has The Sickness
DEVIANT DEVELOPMENT
alloycowboy said:
It's not possible. It has been attempted in the past. All modems are to be installed using Odin. Look in the forums, someone made a flashable zip for the modem. Won't work.
Good luck though
My S4 Has The Sickness
DEVIANT DEVELOPMENT
Click to expand...
Click to collapse
Cool thanks for the reply.
Being that I have the modem.bin
I'm going to try mobile Odin pro v 3.85
See if it will flash and work
I'll be sure to post results.
Mobile Odin pro did the trick
I loaded it into the partition named modem #2 them flashed and BOOM.
New modem installed.
Thanks
I have found a bootloader flashable zip for MJB but I need it as a tar file that I can use in ODIN. Does anyone know of a thread to tell me how to do this? I am hoping it can help recover from the "partial" brick I posted about in this forum.
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
trav06 said:
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
Click to expand...
Click to collapse
I'm not quite sure which one is bootloader. Sometimes you can't flash each one individual ly with odin(ex like creating an odin tar that just has system). Modem files are only on lte devices. Most times you don't need them for custom roms. Anyway, you can extract each IMG and create and tar the IMG up. There are a few commands and guides to tar something and add md5 to them.
As for a flash able zip yes and no. Bootloader can't be flashed in twrp most times since I have never seen anything like that. You usually have to flash bootloader with odin. Modems don't need to be flashed since twrp doesn't mess with it most times. But you can create an flash able zip of kernel, recovery and I'm unsure of system.img(may need to extract or adjust updater scipt. Though I dont fully know).
Usually the twrp flashable in ArchiKitchen so it can help with the updater scipt stuffs. Just don't add any options such as root and busybox to it. I've never seen a flashable bootloader in twrp so it's highly unlikely of it being possible.
Hope this helps!
trav06 said:
I have the latest full stock base for the Galaxy Tab Pro 12.2 Wifi (SM-T900) and want to make a bootloader package that can be flashed in ODIN.
Inside of the full stock tar file is:
boot.img
recovery. img
system. img
cache.img
hidden.img
sboot.bin
Which is the bootloader, and what do I need to do to the file, if anything, so that it can be flashed individually in ODIN? Also, should there be a modem file? Alternatively, is it possible to create a zip of these things (bootloader, modem) that's flashable in TWRP?
Thanks in advance for any help.
Click to expand...
Click to collapse
Hi
The bootloader tar package for flashing in ODIN:
1) boot.img
2) sboot.bin
Use 'Total Commander' (google it) to make tar package (bootloader).
Any luck with the port?
shayind4
hello, anyone have ideas about how to change from .tar.md5. odin flashable to .zip twrp flashable ???