[Q] Help, phone will not activate after rom update. - Sprint Samsung Galaxy S III

Hey all, I've had my Samsung Galaxy S3 (SPH-L710 for Sprint) for some time now. Since the time I purchased (which was around the time it was released) I've had SlimRom installed. Never had any problems, updates always went through flawlessly, and I love the rom. Just the other day, I decided to update slimrom from to the newest stable version which is 7. Flash went through successfully, everything seemed fine and dandy as usual. But I had no service for some reason... Tried several methods of repairing the problem, to no avail.
In my about phone section, everything is all messed up; my phone number says "000-000-0016" my MIN "0000000016" PRL Version "1" IMEI "Unknown" and unfortunately I do not have a back up of anything, because I completely wiped my phone and did a full restore/unroot using rwilco's method here: http://forum.xda-developers.com/showthread.php?t=2755793.
So now I am unrooted, I still can not get my phone to activate. Talked to a sprint rep at this point to see if they could help. After telling me to do a few different commands, such as ##3283# and changing the info with my MSL and what not, nothing worked. He was stumped. Now I am stumped, and I've got an unrooted Wi-Fi only S3 at the moment.
I've gone through so many threads and different articles and just can not find an answer. I really didn't want to start a thread asking for help, as I've never had to before. But now I feel like a complete noob and need it! Please anybody!

murdercitydan said:
Hey all, I've had my Samsung Galaxy S3 (SPH-L710 for Sprint) for some time now. Since the time I purchased (which was around the time it was released) I've had SlimRom installed. Never had any problems, updates always went through flawlessly, and I love the rom. Just the other day, I decided to update slimrom from to the newest stable version which is 7. Flash went through successfully, everything seemed fine and dandy as usual. But I had no service for some reason... Tried several methods of repairing the problem, to no avail.
In my about phone section, everything is all messed up; my phone number says "000-000-0016" my MIN "0000000016" PRL Version "1" IMEI "Unknown" and unfortunately I do not have a back up of anything, because I completely wiped my phone and did a full restore/unroot using rwilco's method here: http://forum.xda-developers.com/showthread.php?t=2755793.
So now I am unrooted, I still can not get my phone to activate. Talked to a sprint rep at this point to see if they could help. After telling me to do a few different commands, such as ##3283# and changing the info with my MSL and what not, nothing worked. He was stumped. Now I am stumped, and I've got an unrooted Wi-Fi only S3 at the moment.
I've gone through so many threads and different articles and just can not find an answer. I really didn't want to start a thread asking for help, as I've never had to before. But now I feel like a complete noob and need it! Please anybody!
Click to expand...
Click to collapse
To my knowledge the only way to repair this problem would be to buy another device........but before you do that did you make a backup of the rom that was working perfectly and did you try restoring it before you went with Odin? What was your bootloader/modem before you flashed the initial slimrom?

6th_Hokage said:
To my knowledge the only way to repair this problem would be to buy another device........but before you do that did you make a backup of the rom that was working perfectly and did you try restoring it before you went with Odin? What was your bootloader/modem before you flashed the initial slimrom?
Click to expand...
Click to collapse
I did make a back up, unfortunately however, when I did the full restore I lost everything that was on my phone, including the back up. And I did not try restoring is before doing Odin. About the bootloader/modem, no idea.

Welp, seems like its done. I'm eligible for an upgrade anywho. Think I'm going in today and picking up a new LG G3, not sure yet though. Can't decide what phone I want...

Have you tried dialing ##72786#? It is a forced reactivation.

Related

[Q] No ROMs taking, keep getting no MD5 message, phone close to bricked.

I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?

[Q] No Network or IMEI number, :-S

Hi there guys of XDA,
I have a major problem with my NOTE 2, after playing around with some ROMs, Cyanogenmod 11 4.4 NIGHTLY, 10.2 4.3 and Omni 4.4.1 NIGHTLY. I used CWM to load these ROMs with SUPERsu?. This is the first time i have flashed any ROMs onto my phone.
CM 11 was the first ROM i flashed on my NOTE 2 and that's when it started it couldn't detect my sim, It doesn't show me my IMEI number and my Baseband version. I didn't make a back-up of the stock because i didn't need one.
Now i'm stuck with a phone i can only use on Wifi is there anyone that can help? or if its happened to someone else? how did you sort it out?
Also can i restore this through KIES?
shirazi15 said:
Hi there guys of XDA,
I have a major problem with my NOTE 2, after playing around with some ROMs, Cyanogenmod 11 4.4 NIGHTLY, 10.2 4.3 and Omni 4.4.1 NIGHTLY. I used CWM to load these ROMs with SUPERsu?. This is the first time i have flashed any ROMs onto my phone.
CM 11 was the first ROM i flashed on my NOTE 2 and that's when it started it couldn't detect my sim, It doesn't show me my IMEI number and my Baseband version. I didn't make a back-up of the stock because i didn't need one.
Now i'm stuck with a phone i can only use on Wifi is there anyone that can help? or if its happened to someone else? how did you sort it out?
Also can i restore this through KIES?
Click to expand...
Click to collapse
I had this exact issue last week when flashing Kitkat AOSP ROM. Even restoring back to 4.3.1 no network connection was available, except for WiFi. Restoring your EFS will not even work. You just have to re-root your phone.
Not to worry, your phone is OK, perfectly OK. But just quite a bit of work needs to be done. Here: http://forum.xda-developers.com/showthread.php?t=2032849
1. Download original stock firmware for your country and telco
2. Download mode that firmware back to your phone using Odin
3. Download mode to install recovery, this will re-root your phone above steps will un-root your phone
4. Re-flash ROM of your choice, not Kitkat for now
After all i've gone through, and as much as i want to try Kitkat, i think this issue is recovery-related. Both TWRP and CWM needs updating for Android 4.4. I will wait until then.
All the best!
Gandicela said:
I had this exact issue last week when flashing Kitkat AOSP ROM. Even restoring back to 4.3.1 no network connection was available, except for WiFi. Restoring your EFS will not even work. You just have to re-root your phone.
Not to worry, your phone is OK, perfectly OK. But just quite a bit of work needs to be done. Here: http://forum.xda-developers.com/showthread.php?t=2032849
1. Download original stock firmware for your country and telco
2. Download mode that firmware back to your phone using Odin
3. Download mode to install recovery, this will re-root your phone above steps will un-root your phone
4. Re-flash ROM of your choice, not Kitkat for now
After all i've gone through, and as much as i want to try Kitkat, i think this issue is recovery-related. Both TWRP and CWM needs updating for Android 4.4. I will wait until then.
All the best!
Click to expand...
Click to collapse
Thanx for getting back to me at least someone can help. After i followed the things you told me to do. It didn't put the stock ROM back on there so i'm stuck with omni.
After Odin loaded everything to the phone it just keeps going into recovery mode? is that normal or am i doing it wrong because the link you posted up doesn't mention anything about that :-s and i followed everything that link said to do.
shirazi15 said:
Thanx for getting back to me at least someone can help. After i followed the things you told me to do. It didn't put the stock ROM back on there so i'm stuck with omni.
After Odin loaded everything to the phone it just keeps going into recovery mode? is that normal or am i doing it wrong because the link you posted up doesn't mention anything about that :-s and i followed everything that link said to do.
Click to expand...
Click to collapse
Mate, firstly this is the hard way of recovering from "Unknown Baseband" issue. Finally the simple solution was only to download and install an app called SELinux Mode Changer from PlayStore. Then using that app, change SELinux from Enforcing to Permissive resolved everything related to IMEI, EFS, and Unknown Baseband. So hard way I did; i didn't know any better then.
By the way the link is correct. Start from the procedure from the line that says "Installation Instruction [Mobile odin is now have support for NOTE2]"
You must be in download mode (Vol Down, Home, & Power button all pressed together) to flash the Stock ROM using Odin. But where is your status now? If in recovery, can you re-install a ROM? If u r able to reboot back up to OMNI, just install the SELinux app and u will be good to go.
Cheers!
shirazi15 said:
Hi there guys of XDA,
I have a major problem with my NOTE 2, after playing around with some ROMs, Cyanogenmod 11 4.4 NIGHTLY, 10.2 4.3 and Omni 4.4.1 NIGHTLY. I used CWM to load these ROMs with SUPERsu?. This is the first time i have flashed any ROMs onto my phone.
CM 11 was the first ROM i flashed on my NOTE 2 and that's when it started it couldn't detect my sim, It doesn't show me my IMEI number and my Baseband version. I didn't make a back-up of the stock because i didn't need one.
Now i'm stuck with a phone i can only use on Wifi is there anyone that can help? or if its happened to someone else? how did you sort it out?
Also can i restore this through KIES?
Click to expand...
Click to collapse
can you try what i did? http://forum.xda-developers.com/showthread.php?t=2567862&nocache=1
good luck.
"Just sharing my experience in solving this issue. Hopefully it will help solve those who have similar issues.
I flashed a file which messed up my EFS partition. I had a backup and tried to use the available programs to restore my EFS using my backup. None worked. I even brought it to the samsung store, but they said they would change the motherboard and reprogram, and replacement and service would cost more than half the cost of a new N7105. I purchased the phone in another country. The people who had stores to repair phones gave up on my phone. They also offered to replace the motherboard for US$175.00.
My phone was originally under a DMB2 rom (from Singapore I think). I flashed a DMC3 rom, and used this for five months, until i encountered the problem.
I initially gave up and got a note 3. But i could not believe the phone was junk and people in XDA (as I observed) do not seem to give up.
After two weeks, i found the solution below, which brought my phone to working condition.
1. I flashed the stock rom N7105ZHDMI2_N7105ZZHDMI2_TGY from sammobile.
2. I flashed a pit file using Odin. The pit file is found here:
http://forum.xda-developers.com/show....php?t=2137008
This restored the baseband. But IMEI was no longer NULL. However, it was still 0.
3. I downloaded and used the EFS Pro from this link:
http://forum.xda-developers.com/show....php?t=1308546
Before using EFS Pro, make sure you dial *#7284# and change the setting of Qualcomm USB Settings to
"RMNET + DM + MODEM"
I will not hurt your phone if you do, but EFS Pro will just not work. If you don't do this, the EFS Pro will display "Phone not responding" or something similar.
NOTE: I couldn't find the option with RMNET, but i used the option that also had an "RM*** + DM + MODEM".
After the phone is read, change back the IMEI to what it was originally.
Dial *#7284# again to change back to "MTP+ADB".
It's all working now.
Hope this is able to help someone. Now i have two working versions of Note.
Thanks to the authors of the program i used, and the people who uploaded the files used.
Cheers!
shirazi15 said:
Thanx for getting back to me at least someone can help. After i followed the things you told me to do. It didn't put the stock ROM back on there so i'm stuck with omni.
After Odin loaded everything to the phone it just keeps going into recovery mode? is that normal or am i doing it wrong because the link you posted up doesn't mention anything about that :-s and i followed everything that link said to do.
Click to expand...
Click to collapse
karlonicolas said:
can you try what i did? http://forum.xda-developers.com/showthread.php?t=2567862&nocache=1
good luck.
"Just sharing my experience in solving this issue. Hopefully it will help solve those who have similar issues.
I flashed a file which messed up my EFS partition. I had a backup and tried to use the available programs to restore my EFS using my backup. None worked. I even brought it to the samsung store, but they said they would change the motherboard and reprogram, and replacement and service would cost more than half the cost of a new N7105. I purchased the phone in another country. The people who had stores to repair phones gave up on my phone. They also offered to replace the motherboard for US$175.00.
My phone was originally under a DMB2 rom (from Singapore I think). I flashed a DMC3 rom, and used this for five months, until i encountered the problem.
I initially gave up and got a note 3. But i could not believe the phone was junk and people in XDA (as I observed) do not seem to give up.
After two weeks, i found the solution below, which brought my phone to working condition.
1. I flashed the stock rom N7105ZHDMI2_N7105ZZHDMI2_TGY from sammobile.
2. I flashed a pit file using Odin. The pit file is found here:
http://forum.xda-developers.com/show....php?t=2137008
This restored the baseband. But IMEI was no longer NULL. However, it was still 0.
3. I downloaded and used the EFS Pro from this link:
http://forum.xda-developers.com/show....php?t=1308546
Before using EFS Pro, make sure you dial *#7284# and change the setting of Qualcomm USB Settings to
"RMNET + DM + MODEM"
I will not hurt your phone if you do, but EFS Pro will just not work. If you don't do this, the EFS Pro will display "Phone not responding" or something similar.
NOTE: I couldn't find the option with RMNET, but i used the option that also had an "RM*** + DM + MODEM".
After the phone is read, change back the IMEI to what it was originally.
Dial *#7284# again to change back to "MTP+ADB".
It's all working now.
Hope this is able to help someone. Now i have two working versions of Note.
Thanks to the authors of the program i used, and the people who uploaded the files used.
Cheers!
Click to expand...
Click to collapse
Nice, thanks!
For all others that might face "unknown baseband" with 4.3 to 4.4 flashing of ROMS, SELinux Mode Changer app from Playstore will fix that problem. Install the app and set SELinux from Enforcing to Permissive.
i hope your problem is fixed.
i'm not too familiar with CM roms, as i have been using stock since gingerbread. but you have to first do a full wipe before flashing from CM to stock. did you do that? perhaps you can go to recovery, do a full wipe, include Dalvik and Cache. Then go to bootloader and flash your rom.
by the way, my chipset is qualcomm yours may be exynos. if so, then i'm not confident about this solution because i have tried this several times, but only on note 2 LTE.
good luck!

s4 Mini sm-s890l

greetings, i have been having an issue and literally spent all day looking for answers yet nothing is working. I have a SM-S890L S4 Mini from Straight Talk. Anyway, I backed up my stock rom and then flashed cm10.2. My computer no longer recognizes it via usb and the menu and back buttons are no longer active. Restored image before flash and same issues. And I accidentally deleted the backup when I factory restored the phone. I can still boot into recovery and Odin, but I am unsure what to do. My research led me to believe that the S890L and I91505 were the same. Anyway this stuff is fun to tinker with and the best learning method. but my phone being down is not. any information is appreciated.
edit: ok so this is where i am at. I discovered that any unbranded rom will work as far as returning to stock. Where can I find the csc and modem information for straight talk? I chose the 9195 because it is an LTE just like mine, root process went fine and was able to flash cm 10.2, however i get NO audio and my soft keys are not there, they do not work
I know this post is pretty far outdated, but this may help others experiencing similar issues.
S-890L CM Port

Bricked Phone After Update To Marshmallow

Hi, everyone! I have an unrooted, stock firmware (well, not anymore), Verizon Galaxy Note 4 (N910V).
Now, after I attempted to update, through the prompt in my status bar... everything went haywire. I can't even do a factory reset from recovery, and all I can get to is the Verizon logo as it turns on. And nothing else. I went to a Samsung Tech Center in a Best Buy, but because my phone (somehow, never rooted it and did a factory reset after I tried and failed) says Custom on the first bootup screen, the guy wouldn't touch it. How can I fix this myself? I have Odin, and the Samsung Drivers. I have searched around the web, but I have been unable to find a STOCK version of 6.0.1 to flash using Odin. If someone could help me find a way to fix this, even if it doesn't involve flashing, I'd be greatly appreciative. I've searched around on countless forums, including this one, and I haven't found any ways to fix this so I was attempting to do it myself. But, being unable to find a stock version of 6.0.1 for the device itself, or, at least my specific version, I can't do anything right now and I have now been without a phone for two days. Not a huge amount of time, but when you're waiting on a call for a job interview, it's nerve wracking. Thanks in advance!
firmware
CodytheFox said:
Hi, everyone! I have an unrooted, stock firmware (well, not anymore), Verizon Galaxy Note 4 (N910V).
Now, after I attempted to update, through the prompt in my status bar... everything went haywire. I can't even do a factory reset from recovery, and all I can get to is the Verizon logo as it turns on. And nothing else. I went to a Samsung Tech Center in a Best Buy, but because my phone (somehow, never rooted it and did a factory reset after I tried and failed) says Custom on the first bootup screen, the guy wouldn't touch it. How can I fix this myself? I have Odin, and the Samsung Drivers. I have searched around the web, but I have been unable to find a STOCK version of 6.0.1 to flash using Odin. If someone could help me find a way to fix this, even if it doesn't involve flashing, I'd be greatly appreciative. I've searched around on countless forums, including this one, and I haven't found any ways to fix this so I was attempting to do it myself. But, being unable to find a stock version of 6.0.1 for the device itself, or, at least my specific version, I can't do anything right now and I have now been without a phone for two days. Not a huge amount of time, but when you're waiting on a call for a job interview, it's nerve wracking. Thanks in advance!
Click to expand...
Click to collapse
hsbadr has all the firmware listed here: http://forum.xda-developers.com/not...mware-firmware-kernel-modem-recovery-t2942937, he has uploaded the full Odin flashable firmware for Retail N910v in that thread Full Firmware: https://www.androidfilehost.com/?fid=24588232905720218
Hope that helps you.
CodytheFox said:
Hi, everyone! I have an unrooted, stock firmware (well, not anymore), Verizon Galaxy Note 4 (N910V).
Now, after I attempted to update, through the prompt in my status bar... everything went haywire. I can't even do a factory reset from recovery, and all I can get to is the Verizon logo as it turns on. And nothing else. I went to a Samsung Tech Center in a Best Buy, but because my phone (somehow, never rooted it and did a factory reset after I tried and failed) says Custom on the first bootup screen, the guy wouldn't touch it. How can I fix this myself? I have Odin, and the Samsung Drivers. I have searched around the web, but I have been unable to find a STOCK version of 6.0.1 to flash using Odin. If someone could help me find a way to fix this, even if it doesn't involve flashing, I'd be greatly appreciative. I've searched around on countless forums, including this one, and I haven't found any ways to fix this so I was attempting to do it myself. But, being unable to find a stock version of 6.0.1 for the device itself, or, at least my specific version, I can't do anything right now and I have now been without a phone for two days. Not a huge amount of time, but when you're waiting on a call for a job interview, it's nerve wracking. Thanks in advance!
Click to expand...
Click to collapse
With a "Custom" on the opening splash screen, someone's been messing with the phone. When you can come clean with what you did to your phone, we might be able to help. Otherwise, use the search function to find out how to fix your phone when you've screwed it up.
Why LIE about what you did to the phone to XDA? Sure, lie to Samsung, VZ, BestBuy, etc, but what possible reason would you have to lie here when you are asking for help?

SGH-T999 Custom ROM with working 4G

Greetings,
I really don't want this to be a repeat post, so I have spent many days now searching for this answer, not just here on XDA if I was honest, I have links to prove it
The aim is to give a little new life to my old phone, and get off the 4.1 build it is on.
With that said, in summary, I have tried a few different custom ROMs; Cyanogenmod 11 - 13, stable to nightly. PAC MAN ROM for Lollipop, some other roms for KitKat I found else where, but in all these I have not been able to get 4G to work. I understand about updating the Modem, and got the latest version from DocHoliday77's post for the Galaxy S3, in point of fact I tried every modem version for 4.3+ on there
But for all this, and it's been time consuming I never managed to actually get 4G to work as stated
I tried playing with settings in Test Mode (*#*#4636#*#*), changed preferred settings, added APN's, rebooting during certain phases of the moon ... but somehow it all avails me diddly.
Finally I have genuinely tried searching for info on if this just isn't going to happen and that's how it is, but somehow I found lots of posts about other models or networks that made it work more than something saying this won't work (putting aside the info on CM 11 that states it's a known issue and won't work on some build I forget).
Which leads me to this post: I wondered if anyone could point me in either the direction of a 4.4+ custom ROM or other ROM, compatible for SGH-T999 (T-Mobile Galaxy S3), that has working 4G. Or how I can get 4G to work on one of the ROMs I have already tried, kind of partial to a nice CM but I am willing to venture.
Also happy to just hear other input about giving new life to the phone so any feedback welcome
Thanks for your time!
NOTES
======
Using TWRP 3.x for flashing
Phone is rooted
IMEI is visible & fine on custom ROM
4G works on stock ROM
not experienced at this but willing to read
Edit: something I had not noticed before, I install Gapps for most of my tests but never use it. I just tried to download from Play Store, it acts as though I have no connection; waiting to download appears, then eventually it says waiting for network. Yet I am able to browse the net fine with the phone floating between 3G & H+. I don't know if that might help, so figured I should add it.
Is the phone running the latest bootloader and modem? Maybe both are needed to properly get 4g on all Roms?
audit13 said:
Is the phone running the latest bootloader and modem? Maybe both are needed to properly get 4g on all Roms?
Click to expand...
Click to collapse
That's a really good question, let me see if I can find out how to get my bootloader info and I'll get back to you.
May I ask what the latest bootlader is for the SGH-T999, or where I could find this so I can compare it? I couldn't seem to find it, though the most resourceful post I did find related was T999 UVDMD5 Firmware / Bootloader by mnasledov, though it is also a little outdated it appears, I haven't read my entire way through it yet sorry, I also know the phone is a little outdated too .
So that wasn't too bad to find out
I don't have the latest bootloader if that should match the baseband I install.
Where after a ROM install I get my baseband to T999UVUEOH1, but the bootloader stays on T999UVDLJA.
I haven't quite found where to get the latest bootloader just yet, though I did really spend the last few minutes discovering about the bootloader; if you or someone could find the time to point me in that direction that would be awesome
Simplest way to make sure you have the latest would be to flash the most recent stock rom from sammobile.com in Odin.
Thank you very much @audit13, I do appreciate the time you took out to help me and I also appreciate the point in the direction of what next.
I'll go dig into that for a while and see what to do to be sure, before I start
Looks like this is the latest one, so I will give this a shot : PDA T999UVUEOH1 & CSC T999TMBEOH1, version 4.3.
So just as a quick question, since I've never upgraded the bootloader in this fashion etc., from what I have read this is a one way street correct? And since I am upgrading to stock, then I guess will I lose root, which I will have to go back down the path of for a reinstall, or could I flash my old back up over this from TWRP and in that fashion have the latest bootloader, but keep everything I have for the moment as I investigate a ROM that will offer 4G.
I guess what I am getting at is even if having the latest bootloader and some other ROM with the latest baseband doesn't give me 4G still, can I go back in terms of the OS version to my 4.1.1 and keep things as is with a newer bootloader?
I will investigate this myself too, I just always preferred some additional input when discovering things where possible.
I do appreciate your time, thanks again!
No, you cannot run stock 4.1.1 on a 4.3 bootloader unless it is a custom 4.1.1 rom based on a stock touch wiz rom.
I do not think it is a problem to run the latest bootloader and modem as the latest custom ROMs often require an updated bootloader and modem.
Once on a 4.3 bootloader, you can't downgrade to something older.
Thanks again @audit13, that matches what I have read, I appreciate the confirmation!
Looks like I will be undergoing a re-root etc. so I'll get my information together, have a little more read, see what I need to back up and then jump down the rabbit hole
I'm grateful for your time and help.
If you decide to run a custom rom, just flash a stock rom, then immediately flash twrp via Odin, then install the rom and gapps. No need to root before hand.
Ahh ok, that would have made the most sense. However I didn't have an opportunity to check back on this thread until now so even though you had awesome speedy reply I missed it.
I did manager to successfully flash the stock ROM from Sam's. It did also update the bootloader so THANK YOU very much for that.
I had to fiddle a little to get Odin to recognize the my Galaxy S3 in the end it was simple: after I installed Kies to get the drivers on, I disabled WI-Fi (I use it for my dev work, and then it didn't try to spend time getting other drivers and it all went great. But that's just a note incase maybe one day someone else reads the thread and wonders how, this might help.
I'm just actually restoring a couple f things on the stock ROM, I figured I would have it ready in the event a custom ROM doesn't suit immediately, as I find one I like, then I have a back up of the stock ROM on 4.3 to revert to. Incidentally I just used TWRP manager from Google play store to install TWRP, hopefully it's the same as the flash, except now I know I rooted when I didn't have to
@audit13 Thanks, I know I keep saying that but I appreciate your time the same way I would hope someone else appreciated mine.
Incidentally once ready I will post an update here about the success of getting 4G on Cyanogenmod 12 or even 13 maybe, or someone of the other custom ROM I try, to share that info.
So just an update, I can confirm even with both an updated bootloader and matching updated baseband there is still no 4G on Lollipop Cyanogenmod 12, haven't quite tried any other yet, that was the one I liked the most but I will carry on and get a list as I have time then update here.
If there are any further suggestions I'm all open to them
Thanks [email protected]
Do you get 4G on a stock ROM? You have an LTE capabale sim? You get 4G on another phone with the same sim card?
Right, this SIM gets 4G on 2 other phones it's been in, on this phone on stock ROM it gets 4G too. Reverting back to stock backup in TWRP, from CM12 looks like it tripped knox I think it is, so now the warranty bit is 1 oops. But I managed to Odin back to 4.3 stock, so now I also need to see if I can try to flash maybe to CM 11, which is 4.4.x, or if maybe I'm stuck here. If I can find out I certainly will update the result of 4G testing.
You've been really patient & helpful thanks!
First let me say I'm a noob. I've rooted and jailbroken devices but I admit it's all from falling instructions. I rooted my s3 a while ago and installed twrp 1.0.8.7 yesterday. I did a full wipe including system and all catches and installed the latest nightly of cm13. Everything is running great. I don't know if this helps but maybe it's your process. Good luck!
Sent from my Amazon Jem using Tapatalk
Shack70 said:
First let me say I'm a noob. I've rooted and jailbroken devices but I admit it's all from falling instructions. I rooted my s3 a while ago and installed twrp 1.0.8.7 yesterday. I did a full wipe including system and all catches and installed the latest nightly of cm13. Everything is running great. I don't know if this helps but maybe it's your process. Good luck!
Sent from my Amazon Jem using Tapatalk
Click to expand...
Click to collapse
That's really helpful thanks @Shack70, since updating to 4.3 I have only tried CM 12, I can certainly give 13 a shot, & you have 4G working then please?
incidentally I have actually recorded every step I performed, in the event I repeat this again or I had to explain it. But my process maybe at fault I agree; I rooted my phone with towelroot. Installed TWERP manager (3.0.2 something, maybe I should try 1.0.8?), rebooted into recovery & first thing was take a full backup on stock. Then I did a factory wipe, & advanced wipe. Then installed the ROM, wiped dalvik/cache. Installed Apps, wipe dalvik/cache, reboot
Hopefully that's not too much? I just wonder if any of those steps raise alarm?
Edit: mind if I throw a few questions on here at you please @Shack70?
what do you wipe from the options please?
after the install, do you run any other wipes please?
how did you get TWRP on your phone? Not sure if that or version matters but I'm willing to try
Morrigon said:
That's really helpful thanks @Shack70, since updating to 4.3 I have only tried CM 12, I can certainly give 13 a shot, & you have 4G working then please?
incidentally I have actually recorded every step I performed, in the event I repeat this again or I had to explain it. But my process maybe at fault I agree; I rooted my phone with towelroot. Installed TWERP manager (3.0.2 something, maybe I should try 1.0.8?), rebooted into recovery & first thing was take a full backup on stock. Then I did a factory wipe, & advanced wipe. Then installed the ROM, wiped dalvik/cache. Installed Apps, wipe dalvik/cache, reboot
Hopefully that's not too much? I just wonder if any of those steps raise alarm?
Edit: mind if I throw a few questions on here at you please @Shack70?
what do you wipe from the options please?
after the install, do you run any other wipes please?
how did you get TWRP on your phone? Not sure if that or version matters but I'm willing to try
Click to expand...
Click to collapse
In twrp I wiped system and all caches before installing the rom and gapps. I installed an older version of twrp using Odin and updated it to 2.0.8.7 using the twrp app in the play store. Yes I have 4g/lte. I've seen it switch from lte to h+ to 3g depending on my location so I'm sure it's working correctly. The camera and Bluetooth also work fine. I hope this helps, I'm still learning and most of what I've done is just by following others instructions here at XDA.
Sent from my Amazon Jem using Tapatalk
I definitely appreciate the reply thanks!
I gave the latest nightly CM 13 a shot just now, 7/31/16 version essentially. Not finding any issues with the ROM, can't get 4G to show up no matter what though , even with changes and attempts to APN settings etc. None the less maybe to give my phone a rest I'll just stick with this a while and decide if a newer nightly comes out I want to try, or better yet a stable version at some point. Then I can verify how much I really miss my 4G I guess.
All the previous attempts, including this one always results in 3G to H+ network with no issue, it's just that 4G that never shows up for me.
Incidentally without a serious search around I couldn't even find TWRP 2.0.8.7, it's not on the TWRP manager version I have so curious, I ended up just going with 2.8.0.7, thinking maybe it was a typo?
Otherwise I basically run the same type of install you mention, I also clean dalvik, cache, system & data in my case. Just to confirm that.
I have a slightly off topic question here, if I decide to go back to to stock I was wondering, if i went from UVUEOH1 4.3 JB build, to the previous UVUENC2 4.3 JB build; because I've seen this available as a clean route 66 version, is this still considered a downgrade and a bad idea? I'd be flashing with Odin from @DocHoliday77 post here.
@Shack70, thanks for the input, thanks for the guide on your steps, glad I've confirmed I'm doing the same even if I can't get my 4G, hopefully someone on a Galaxy S3 T-Mobile, went through this found a solution, and maybe will let me know what they did too, not sure if you are on T-Mobile or not. 
 @audit13, also thanks, you've been replying plenty too and I appreciate that also!
One small thing I just came across looking over the logs of the install.
When flashing CM 13 with TWRP, I noticed it said the Target: samsung/d2tmo/d2tmo:4.3/JSS15J/T999UVUEMJC:user/release-keys.
Is it normal and OK for it the be referencing a different baseband/bootloader than what I actually have on my phone?
UVUEMJC vs the UVUEOH1? Where the one as named by TWRP flash is 2 versions older than what I have installed? Not necessarily stating this is an issue, just asking please if this is normal, and I also understand it could be something I have overlooked in my reading, it's been a lot of reading
I would not worry about the referenced baseband as flashing CM13 does not change the bootloader or baseband during the flash process.
audit13 said:
I would not worry about the referenced baseband as flashing CM13 does not change the bootloader or baseband during the flash process.
Click to expand...
Click to collapse
That makes sense thanks @audit13, just a few of the questions I had building up.
So that my previous question doesn't get lost, and although I know it's a dying phone for users hopefully this might get some visual
if I decide to go back to to stock I was wondering, if i went from UVUEOH1 4.3 JB build, to the previous UVUENC2 4.3 JB build; because I've seen this available as a clean route 66 version, is this still considered a downgrade and a bad idea? I'd be flashing with Odin from @DocHoliday77 post here.
Click to expand...
Click to collapse

Categories

Resources