On my One Plus running 5.0 I have trusted pair enabled but even if my watch is connected I have to enter the pin. Any suggestions? I did pair/unpair the watch but did not help.
Related
Hi guys,
the moto 360 doesnt connects to my phone. I hope someone knows a solution for this problem.
My situation:
The phone is a Lenovo S920 with chinese firmware. It has android 4.4.2 Vibe UI 2.0 and i flashed gapps-micro. the latest version of play services, google search and android wear are installed. Everything works perfect.
The website from google with the wear compatibility check works.
Pairing with the watch works also but it doesnt stay connected, just for a few milliseconds.
With other phones the watch is working and the bluetooth from my phone works with other devices, like speakers or computer.
For me it sounds there is a problem with the bluetooth. Is there a opperntunity to fix this. I'm wearing the watch since two weeks without any functionality. Well, it just does what a watch does, telling me the time
I fixes it. After I installed new firmware on my phone android wear asked for a permission to use bluetooth. But after any disconnection the pop up displays again. It doesnt remember my choice.
Hoping someone can help shed some light. Googling didn't turn up anything. My S6 after the 5.1.1 update, bluetooth is borked. It is connected to my Sony Smartwatch 3, Gear 2 Neo, and was connected to my Fibit Charge HR and Microsoft band. The Fitbit Charge HR got a firmware update and then would not pair with my S6, but would pair with my work iPhone. So I thought it was defective. But it pairs with my old S5. So I went into bluetooth settings and did a scan and it will not see it. So, I stupidly unpaired my microsoft band and now it's now recognized at all. The SW3, G2 Neo are paired, as well as my Sync in my car, but show up in bluetooth as "Not Connected" even though they are. This is frustrating and I don't want to go back to my S5. Everything else seems to work okay - just the bluetooth. Anybody have any thoughts? I'm on the latest OTA, OFE.
SO no one's got any ideas. I have wiped cache both while normally running and by booting into recovery. Bluetooth still hosed. Would a factory reset help?
Saafir said:
@kbboykin Does your devics keep a bluetooth pairing history? If so delete it and try again. Have to do that with a lot of my devics
Click to expand...
Click to collapse
I don't think it does. See screenshot. All of these devices are paired and connected, but bluetooth says they are "Not Connected".
I have a new Fire Phone running the stock Fire OS 4.6.1, rooted and with Google Play Store Installed.
My vehicle is a 2007 Chrysler Town & Country with the UConnect feature built in. I have successfully paired my phone already.
The main issue is that I have to manually connect every time I get in the car. After I leave the car or the car is turned off, it disconnects as expected, just never reconnects automatically.
I just switched over from an iPhone 4 and this is a major inconvenience. WIth the iPhone it just worked. If I was on a call and got in the car, it would automatically switch over to bluetooth UConnect and come over the cars audio system.
Is there anyway to make this work properly? I have seen a couple apps in the Play Store that seem to state they can fix this, but I am a little weary of them. Like Bluetooth Auto Connect
Does anyone have any experience with this app or have any other general advice on this? Thanks in advance for any suggestions.
I did also check this thread with no real luck http://forum.xda-developers.com/showthread.php?t=1312576
drewb0y said:
I have a new Fire Phone running the stock Fire OS 4.6.1, rooted and with Google Play Store Installed.
My vehicle is a 2007 Chrysler Town & Country with the UConnect feature built in. I have successfully paired my phone already.
The main issue is that I have to manually connect every time I get in the car. After I leave the car or the car is turned off, it disconnects as expected, just never reconnects automatically.
I just switched over from an iPhone 4 and this is a major inconvenience. WIth the iPhone it just worked. If I was on a call and got in the car, it would automatically switch over to bluetooth UConnect and come over the cars audio system.
Is there anyway to make this work properly? I have seen a couple apps in the Play Store that seem to state they can fix this, but I am a little weary of them. Like Bluetooth Auto Connect
Does anyone have any experience with this app or have any other general advice on this? Thanks in advance for any suggestions.
I did also check this thread with no real luck http://forum.xda-developers.com/showthread.php?t=1312576
Click to expand...
Click to collapse
Does your car have multiple ways to connect a device to the car's stereo via Bluetooth? According to this post, using the steering wheel/voice commands makes a difference versus using the stereo's dials. Another post mentioning the same issue and fix for other phones and cars: https://discussions.apple.com/thread/6760095
Hi guys,
I recently bought a cheap smartband that has a heartrate sensor.
I bought it for running and I assumed that I could connect it with runtastic pro just like any other smartwatch.
The smartband comes with its own software called VeryFit (v.2.0).
and heres the wierd part : My sony z2 (Android 6) can perfectly find the Smartband however the pairing always failes but
the app can find the device and connect to it without listing it as a connected bluetooth device in the settings menue (which would be
the requirement to use the smartband with runtastic)
How is that possible ? Any idea why a normal pairing fails and how I can fix it?
thanks in advance
Links:
(smartband ) https://www.aliexpress.com/store/pr...of-bracelet-sleeping/1817071_32655083048.html
(app) https://play.google.com/store/apps/details?id=com.veryfit.multi&hl=de
I'm currently trying to pair my SmartWatch and navigation device with the vivo. With the SmartWatch, Coros Vertix 2, it worked straight away.
With the Hammerhead karoo 2, however, the vivo is desperately trying to establish a connection.
Pairing works, the number code came up briefly at first, but it doesn't appear in the app, not even under the available devices in the BT settings.
Tried lots of tips, removing all paired devices and then restarting, activating/deactivating BT, restarting the navigation device etc..
Nix.
Anyone with an idea what the problem could be?
Solved the Problem with the Help of the customer Service of Hammerhead
Hard Reset of the Karoo and new Pairing wihthin Seconds.