Change the screen on my g2, ls980, and when I switch it looks good, I use it and it works. But when he turned off the screen and want to turn back, no catches. is heard when you unlock as you move. but the screen does not turn on.
What could it be? I make? please help.
So the G2 sucks in the fact the Digitizer and LCD tend to go together but not necessarily at the same time. If you crack the glass the LCD 9 times out of 10 will slowly fail. Speaking from multiple experiences. ?
Related
Ok, so I didn't know that, that (from my other post) was "Insurance fraud". So I decided to fix the phone myself, Insurance cancelled. Now as you may already know, I stood on my phone. I am guessing that the Digitizer is the touch panel and the screen is a the botton displaying the image.. Once the damage was done, I quickly checked if the phone was alright so I pressed the "Unlock key" and had to swipe the unlock screen to see if the phone was working, so obviously the Digitizer is working as it did change to homescreen when I swiped the screen.
As I panicked I took the battery out, and turning the phone back on hoping it will work, It did not. Some green dots and lines started apearing. Then it stopped displaying, so a black screen after the vibration when I'm turning on the phone.
I also know that the phone is still working because when I plug it into my computer Windows 7 has that little bleep..
The glass screen is not cracked but, when you look at the screen at an angle you see the some scratches (or cracks) underneath on the AMOLED..
Now, my question is, do I need a new AMOLED or a new Digitizer?
thanks for your time!
edit; I've been looking at abit of nexus one Screens/Digitizer's, they seem cheaper, so would they work with a Desire?
Hi guys, cracked my note 2 glass last week and decided to replace JUST the glass myself. This included me warming up the screen with a hair dryer and replacing the glass. All went well, was VERY careful only to find out when I turn the phone on the screen is either blank OR white, and you can faintly see the boot logo. This alternates randomly when im prodding the motherboard. Does this mean there is a dodgy connection? Can I fix this, or have I completely melted the amoled when heating?
Forgot to add: Phone turns on fine, boot sound is there, capacative buttons light up. Even touch screen works (I can answer phone calls)
Thanks guys
My S3 has been working fine for months sort of. I bought it off of ebay with a huge crack in the glass, then my brother dropped it and all the glass fell out. To use the phone we has to touch the bare LCD of the phone, which after a while we just but a screen cover over it. I waited 2 months, bought a new glass replacement and put it on, everything worked just fine. After a little the home button when pressed to the left a little would make the screen go crazy. it would start tapping and swiping in random places. After locking and waking the screen the phone was normal again. after that, i removed the glass again, and this time when putting it back on if i pushed the home button it pushed the glass down a little, which would turn my screen black. locking the phone and waking the screen again turned the screen back on. Also the screen was a lot less sensitive, i'd have to tap a key 2-5 times sometimes to hit a specific letter. whenever that happened i put 3 dsi's to weigh it down and push the screen down, which would improve the sensitivity. that worked twice, and now my screen doesn't respond to touch at all. the screen will wake, but only when i press on the bottom right corner of the screen will it respond to touch. Any word on what could be the problem? i need to know what to buy to replace in the phone. I've already taken the whole phone apart and plugged everything back in, after i had tried everything to get my phone to respond. Could this be a digitizer problem, or an LCD problem? any possible fixes without having to replace anything?
The first issue was using the device without the glass installed. By touching the bare LCD you most likely damaged it. Your best bet at this point is probably going to be to replace the Touch assembly ( Glass / LCD Touch digitizer ) . Also keep in mind, when doing any sort of Screen replacement. Be sure to keep everything as clean, and dust free as possible.
ok so recently i dropped my phone on some concrete floor it has a case on. when i looked at the phone and no scratches and scuffs were found but when i tuned on the screen it was glitching badly the lock screen was moving up and down a lot . i then took out the battery and put it back in. when the screen turned on the lg looked weird the color was white , you can still use touch screen etc and see the lock and home screen but instead of the normal colors the screen was red and white any one can help me?? i dont think this phone has warranty please help me im very scared ... to fix the screen i dropped the phone on the concrete phone multiple times and it fixed it but any light pushing or light drops makes the phone go back to the screen again so i have to drop it some more times to fix. please help me before i break the screen digitizer or lcd :crying: ]
Unfortunately, even if you had a warranty it wouldn't cover damage caused by a drop.
I think your only option is to take or send the phone to be repaired. It might need a new screen assembly.
meyerweb said:
Unfortunately, even if you had a warranty it wouldn't cover damage caused by a drop.
I think your only option is to take or send the phone to be repaired. It might need a new screen assembly.
Click to expand...
Click to collapse
k thx bro
Hi,
Unfortunately for me i dropped my phone and cracked my tempered glass in several places. gladly the screen underneath was perfectly fine after drop however, it has developed a fault as the screen won't turn on at all. I tried turning it off and restarting and although i can hear the boot up logo sound i see no picture at all. i can receive calls but cannot answer due to screen not displaying.
The screen had four main pressure cracks.... one is top left, one on the ear speaker, one bottom middle and one bottom left of phone. hopefully you can see it in picture.
Can you give advice on what to try or do to resolve this? will i need a new screen or disassemble to see what the issue is?
I've only had the phone for 2/3 months at most
Thanks in advance
looks like i will answer my own question....
i bought a replacement lcd & digitiser, one complete unit and swapped the necessary components over to new screen. all is working and good. not sure if the screen is repairable but there are other parts inside this screen worth selling on. it still has a non cracked immaculate screen along with the charging port and other stuff inside old screen.
at a cost of £70, i consider this an expensive fix
Thanks for the input kakawak
cheers