[Q] What do I need? - Desire Q&A, Help & Troubleshooting

Ok, so I didn't know that, that (from my other post) was "Insurance fraud". So I decided to fix the phone myself, Insurance cancelled. Now as you may already know, I stood on my phone. I am guessing that the Digitizer is the touch panel and the screen is a the botton displaying the image.. Once the damage was done, I quickly checked if the phone was alright so I pressed the "Unlock key" and had to swipe the unlock screen to see if the phone was working, so obviously the Digitizer is working as it did change to homescreen when I swiped the screen.
As I panicked I took the battery out, and turning the phone back on hoping it will work, It did not. Some green dots and lines started apearing. Then it stopped displaying, so a black screen after the vibration when I'm turning on the phone.
I also know that the phone is still working because when I plug it into my computer Windows 7 has that little bleep..
The glass screen is not cracked but, when you look at the screen at an angle you see the some scratches (or cracks) underneath on the AMOLED..
Now, my question is, do I need a new AMOLED or a new Digitizer?
thanks for your time!
edit; I've been looking at abit of nexus one Screens/Digitizer's, they seem cheaper, so would they work with a Desire?

Related

Rainbow marks on screen

I was wondering if anyone can help me fix a problem I've got with my tp2. Basically the device turns on and I can make phone calls and use programs fine. However I can't use the touch screen at all, the hard buttons all work, but touching the screen has no effect.
When the screen is turned off I can see a rainbow pattern on it and it moves to my touch. This could be water damage but I don't remember dropping it in water. The water mark is red on the phone and battery, so it probably is water damage.
Just wondering if anyone knows an easy fix for this. Thanks for reading
Just had exactly the same thing happen this week. At first if I turned it off and firmly pressed my thumbs up the screen (as if I was pushing the rainbow marks to the edge of the screen) I could get it to respond for a while. Then it started to get larger spots and now I can't get it to respond no matter what I do...
If the touch screen is not functional, then you'll likely need to replace the digitizer. I would suggest purchasing the LCD/digitizer combos, as they are easier to install for first timers.

[URGENT]Screen!

I've broken my screen, to be accurate not me but some dude, he paid for the new screen. Ofcourse, he picked the most ****ty store he could to fix it to pay less money for it, it was horrible. Light from the side of the phone was leaking, the buttons didn't light up well, the front camera lense was missing and most importantly the screen itself wasn't like before. First of all, it fell off from the phone all the time ( with just the two connectors connected ), it was horrible pale and etc.
Being the social akward I am, I was silent about it, and got used to the screen after I glued it.
Anywho, yesterday without any warning or anything screen stopped working. Sound is playing, digitizer is prolly working, screen? nah. Black screen. I opened it up few times before as the LCD connector disconnected, it was okay. Now the connector was inside still, connected and I opened it and tried to tighten it up, thought it was loose or something. Nope, still no screen.
Now I come to you, xda, with the need of help.
Where can I buy a REAL. LCD2, like stock screen?
And if its possible, how can I identify if the screen I got earlier IS lcd2 original screen? ( the seller said it was, obviously it wasn't )
Thanks! ( Really hope for fast answer )
Arcaneex said:
I've broken my screen, to be accurate not me but some dude, he paid for the new screen. Ofcourse, he picked the most ****ty store he could to fix it to pay less money for it, it was horrible. Light from the side of the phone was leaking, the buttons didn't light up well, the front camera lense was missing and most importantly the screen itself wasn't like before. First of all, it fell off from the phone all the time ( with just the two connectors connected ), it was horrible pale and etc.
Being the social akward I am, I was silent about it, and got used to the screen after I glued it.
Anywho, yesterday without any warning or anything screen stopped working. Sound is playing, digitizer is prolly working, screen? nah. Black screen. I opened it up few times before as the LCD connector disconnected, it was okay. Now the connector was inside still, connected and I opened it and tried to tighten it up, thought it was loose or something. Nope, still no screen.
Now I come to you, xda, with the need of help.
Where can I buy a REAL. LCD2, like stock screen?
And if its possible, how can I identify if the screen I got earlier IS lcd2 original screen? ( the seller said it was, obviously it wasn't )
Thanks! ( Really hope for fast answer )
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26408110&postcount=3799

Screen not displaying anything at all

I know it turns on, it vibrates, and the notification light turns on and stuff, but the screen does absolutely nothing. The bottom buttons work fine. I dropped it on a tile floor screen first and it cracked, most of the crack being centralized in where the lcd ribbon is on the top left. The screen doesn't look cracked or anything. I tried opening it and reattaching the ribbon, but it didn't work. Any ideas on what could be wrong and how to fix it? Id rather not have to spend $300 for a whole new screen. Thanks
mudkipz51 said:
I know it turns on, it vibrates, and the notification light turns on and stuff, but the screen does absolutely nothing. The bottom buttons work fine. I dropped it on a tile floor screen first and it cracked, most of the crack being centralized in where the lcd ribbon is on the top left. The screen doesn't look cracked or anything. I tried opening it and reattaching the ribbon, but it didn't work. Any ideas on what could be wrong and how to fix it? Id rather not have to spend $300 for a whole new screen. Thanks
Click to expand...
Click to collapse
That screen is gone as you allready suspected. Take it to a service center or replace it yourself.
so nothing else could possibly be wrong with it? I just don't see how a cracked screen could do this
Go to the nearest Samsung repair center ,and pay 500 $ for it..Or replace it yourself but this means you'll lose the warranty.I feel sorry for you and for your N2..Why did'nt you bought a case?I actually have the Samsung Cover + and my dad dropped it .Nothing bad happened.
I called samsung and they said it would be $180 to fix it which seemed cheap but I don't know. I'll probably just sell it as is, buy a temporary phone, and wait for the s4 to come out. I had a case on it, but not the flip cover ones because they were annoying and didn't protect the sides at all. Plus this was a little more forceful than a regular drop.

[Q] Touch screen doesn't respond to touch

My S3 has been working fine for months sort of. I bought it off of ebay with a huge crack in the glass, then my brother dropped it and all the glass fell out. To use the phone we has to touch the bare LCD of the phone, which after a while we just but a screen cover over it. I waited 2 months, bought a new glass replacement and put it on, everything worked just fine. After a little the home button when pressed to the left a little would make the screen go crazy. it would start tapping and swiping in random places. After locking and waking the screen the phone was normal again. after that, i removed the glass again, and this time when putting it back on if i pushed the home button it pushed the glass down a little, which would turn my screen black. locking the phone and waking the screen again turned the screen back on. Also the screen was a lot less sensitive, i'd have to tap a key 2-5 times sometimes to hit a specific letter. whenever that happened i put 3 dsi's to weigh it down and push the screen down, which would improve the sensitivity. that worked twice, and now my screen doesn't respond to touch at all. the screen will wake, but only when i press on the bottom right corner of the screen will it respond to touch. Any word on what could be the problem? i need to know what to buy to replace in the phone. I've already taken the whole phone apart and plugged everything back in, after i had tried everything to get my phone to respond. Could this be a digitizer problem, or an LCD problem? any possible fixes without having to replace anything?
The first issue was using the device without the glass installed. By touching the bare LCD you most likely damaged it. Your best bet at this point is probably going to be to replace the Touch assembly ( Glass / LCD Touch digitizer ) . Also keep in mind, when doing any sort of Screen replacement. Be sure to keep everything as clean, and dust free as possible.

Top of screen unresponsive

Had my LG G3 for just over a year, dropped it a few times but nothing major - Screen/casing is in perfect condition still.
The screen has started to raise up so light bleeds out on both sides, tried to press it back down but unfortunately it springs back up. This didn't really bother me until the top part of my screen became unresponsive, I can no longer pull the notification drawer down- I've turned on the show touches in developer options and the screen doesn't pick up my touch at the top of the screen, if I put it in landscape mode the same part of the screen is unresponsive.
My device is under warranty but I'd rather find a solution myself to avoid being without a phone for a few weeks etc.
Is there anything I can do except replace the digitizer?
Curtis
Bump. Having the same exact issue & can't find any solution.
Well, mine had the same problem of the digitizer raised up... I discovered that my battery was swollen then I replaced it with a new one and it fixed that problem... No idea about unresponsiveness...

Categories

Resources