Is this portable from the z3 compact?
I have looked everywhere for an answer and even asked on the cross development thread "project sonico-audiomod" but nobody wants to give me an answer.
On that thread he even has it listed in the features "fixed usb dac not working well" which makes me think its been ported but i flashed the mod and theres nothing.
Can ANYONE out there shed some light on this please?
Related
Hi,
searching for this topic in Android forums or on XDA brings this questions up a lot of times, but no answers at all.
My last chance is some device specific solution. Maybe it needs a rooted device and/or native code? Since I have no experience with this stuff at all, this would cost me a lot of learning. Can anyone tell me, if there is a chance to reach the goal in this direction, which would rectify this invest?
thanks a lot
-Markus
Is there any chance to make USB Host for wildfire?
I guess not, as USB-Hosts have a different hardware than simple ports.
I heard somewhere that msm 7227 chip supports that feature. But wildfire has msm 7225 and haven't heard that it supports.
And hardware support along with required kernel is needed I think.
Sent from my HTC Wildfire using XDA App
AIR a guy made a circuit and gave the USB-Host to unsupported devices. I may remember wrong.
USB Host again
Hi all,
searching through the forum I found this thread and I very much like to raise the debate again. I am not fully convinced that USB-Host may not work at all on Wildfire.
On the hardware-side: can you completely say that the hardware might not support it at all? Many forum threads (not only on XDA) showed ambiguous signals concerning the chipsets.
On the software-side: The official point is the following:
[I wanted to post a link but was not allowed because I do not have 8posts yet. Type in google: "android developer usb host" and it will lead you to the official page]
So from Android 3.1 and higher USB-Host is supported.
As the development for the ICS (Android 4) mods (CG9 etc.) for wildfire is advancing, I am playing with the idea of trying the beta versions to see whether USB host works.
It would be really helpful to hear the ideas of advanced people on this issue. Can you exclude the hardware-capability? Are the e.g. CM9 mods not made for things like USB-Host?
Currently I unrooted my Wildfire and am trying to get things started for flashing it. So yes, quite a noob.
Thanks a lot and kind regards,
Nebi
Ok, I tried the newest version of CM9 'AOSP Based "Original Development" / Source Built ROMs' by arco68.
Unfortunately my wildfire is not reacting when I put in a usb-stick connected to an adapter USB-A (female) to USB-B (male) adapter.
Am I doing sth wrong? Do I need an USB-hub to power 5volt?
Thanks and kind regards,
Nebi
Ok sorry for writing again. My last post today - promise.
On the hardware-side I found out following:
As I still cannot post any links here:
qualcomm.com/chipsets/snapdragon
You can also click on that site on the link below with more detailed specs.
USB OTG is only supported from Snapdragon Generation 3 on. Wildfire (MSM7225) is Generation 1.
I was also egg-headed and still tried another software, too:
I tried the AOSP Based Derivative MIUI V4 Beta1 bystelios97.
He doesnt reckognize anything.
A last thing: I think that in any case the adapter that I am using is wrong. Instead of using a USB-A to USB-Micro adapter you better need a USB-OTG cable to connect both devices.
Game over I guess?
Hi all, sorry if I put this in the wrong section, still a bit new to posting here.
Anyway, my Xperia Z2 has a sort of faulty headphone jack, and I was wondering if there's a sort of device that can connect to my phone via Bluetooth, and then I can connect my wired headphones to the device, instead of my Z2. I did some research, and I think this one can be used as this function, but still not sure. If anyone could verify this for me or point me in the right direction, that'd be awesome. Thanks!
Just realized I did post this in the wrong section. Could a mod please delete this? I moved it to Questions and Answers.
Actually, you did post in a right section! There are plenty of audio reviews here (I review a ton of audio equipment to help you get the best out of our smartphones!!! http://forum.xda-developers.com/showthread.php?t=2192333). What you are looking for is something like this: http://forum.xda-developers.com/general/accessories/review-don-scorpio-dp-h1-smart-bt-t2922800 - connect your wired headphones and you will get wireless performance equivalent to wired
Hello everybody !!!
I've just buy the Nokia XL, and i'm happy on it for the price!
I've checked in the threads, but on these lot of page, i hadn't seen anything on it... Or i hadn't look right...
In my opinion, that will be good to have otg support...
So, that's my question.
Is it possible to implement USB OTG support in a kernel/ROM?
Or just tell me how to do, and i will try to do it...
I had just port few MTK's roms, and compile 1 or 2 MTK's kernels (not really ok, that's not the same thing than porting) but i can do it with the good informations...
Many Thanks​
PS: Sorry if i'm in the wrong section. There's a lot of time i hadn't post on XDA Forum (Since my LG-P920)
Bnz25 said:
Hello everybody !!!
I've just buy the Nokia XL, and i'm happy on it for the price!
I've checked in the threads, but on these lot of page, i hadn't seen anything on it... Or i hadn't look right...
In my opinion, that will be good to have otg support...
So, that's my question.
Is it possible to implement USB OTG support in a kernel/ROM?
Or just tell me how to do, and i will try to do it...
I had just port few MTK's roms, and compile 1 or 2 MTK's kernels (not really ok, that's not the same thing than porting) but i can do it with the good informations...
Many Thanks​
PS: Sorry if i'm in the wrong section. There's a lot of time i hadn't post on XDA Forum (Since my LG-P920)
Click to expand...
Click to collapse
I guess the MSM8625 chipset in nokia x doesn't support OTG . Some claiming the same chipset on htc desire x had OTG support on custom rom but i can't find concrete evidence about it till now. Some one enlighten me if i'm wrong. :cyclops: I had custom rom on my nokia x and used usb otg helper , diagnostic and end up in failure to use OTG. The device didn't get detected. May be i was wrong .I don't knw. Kernel devs mdzhfi or anmol thakur may have idea about it...
vrp_pradep said:
I guess the MSM8625 chipset in nokia x doesn't support OTG . Some claiming the same chipset on htc desire x had OTG support on custom rom but i can't find concrete evidence about it till now. Some one enlighten me if i'm wrong. :cyclops: I had custom rom on my nokia x and used usb otg helper , diagnostic and end up in failure to use OTG. The device didn't get detected. May be i was wrong .I don't knw. Kernel devs mdzhfi or anmol thakur may have idea about it...
Click to expand...
Click to collapse
First, thanks for our reply !
I use OTG Helper too, and the 1st time it said that don't works, but after a new try, it installed an xml, and tell me that an another one is not here...
You know it check 2 xml files... The 1st is not here, but it has installed the 2nd... So, that's why i'm asking this question...
I'm on Cm11 with my XL, and i don't know if its possible too...
PS: If you search on google "MSM8625+usb otg" you will see that Sanei's phone have otg cables so i think that's can be possible... And some cable are in selling for and any internet's site, like this one....
http://www.actablet.com/micro-usb-otg-cable-for-sanei-n10-ampe-a10-dual-core-3g-qualcomm-msm8625-tablet-pc_p5678.html
but here that's different...
https://www.qualcomm.com/products/snapdragon/processors/s4-s1
So... maybe...
Bnz25 said:
First, thanks for our reply !
I use OTG Helper too, and the 1st time it said that don't works, but after a new try, it installed an xml, and tell me that an another one is not here...
You know it check 2 xml files... The 1st is not here, but it has installed the 2nd... So, that's why i'm asking this question...
I'm on Cm11 with my XL, and i don't know if its possible too...
PS: If you search on google "MSM8625+usb otg" you will see that Sanei's phone have otg cables so i think that's can be possible... And some cable are in selling for and any internet's site, like this one....
http://www.actablet.com/micro-usb-otg-cable-for-sanei-n10-ampe-a10-dual-core-3g-qualcomm-msm8625-tablet-pc_p5678.html
but here that's different...
https://www.qualcomm.com/products/snapdragon/processors/s4-s1
So... maybe...
Click to expand...
Click to collapse
May be ...it will work..I don't know about the xml files used as config in OTG..i'm noob on that... ..I don't know how to proceed on that..
Hi!
I am looking for someone with a moto z on stock, and a ruler. I have a moto z with a broken display (but functional touch panel). I need someone to go through, measure out where to click to enable usb debugging (also computer RSA key confirmation thing).
This would help me tremendously.
try using mhl out..as scene in one of the section...and use TV to do what u want..fyi...itd in the news and discussion section.
Ravi Venugopal said:
try using mhl out..as scene in one of the section...and use TV to do what u want..fyi...itd in the news and discussion section.
Click to expand...
Click to collapse
MHL out is not technically a supported feature. Only a few adapters work and all the ones I've tried so far have not. The ones people have reported working are no longer available, or they simple haven't stated which one they bought specifically