Related
Hey everyone. I just did the system update from 2.3.6 - 4.0.4. My phone does not like 4.0.4 at all and is almost not functional. I wanted to root and put on roms I know worked fine. So I did some looking through the forums and found a odin one-click for EL29 root. Followed instructions, odin doesn't see that phone is connected. Hmm, ok so I went and made sure USB debugging was on and it was but there was no USB mass storage mode. Any ideas on how to get usb turned on so that I can root my E4GT?
Sounds like you're not putting your phone in download.. Below is taken directly from the OP of that thread..
read, read, read.. and don't do like some and say it's too verbose..
Oh, and place the phone in download while you're NOT connected to your pc.. (That's also in to OP..)
sfhub said:
.....
5) Place phone in ODIN download mode
Code:
[B][U]Method #1[/U][/B]
Power down phone
Wait for capacitative button [B]lights to turn off[/B]
Simultaneously [b]Press and Hold [Power] [VolDn][/b] until confirmation screen appears
Press [B][VolUp][/B] to enter Download mode
...
Click to expand...
Click to collapse
You don't need that to root your phone. Just put it in download mode and run ff18 rooted by sfhub. And you're all set to flash
Sent from my SPH-D710 using Tapatalk 2
daniel4653 said:
You don't need that to root your phone. Just put it in download mode and run ff18 rooted by sfhub. And you're all set to flash
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
I put it in download mode like normal and connect it, the drivers are installed but the PC will not recognize the device is being connected.
try using a different usb cable and/or usb port
twoslo said:
try using a different usb cable and/or usb port
Click to expand...
Click to collapse
I tried a different cable on all the usb ports on my tower, and all of them on my laptop. Still nothing ICS has made me ready to smash my phone.
I'm going to try it on my computer at work tonight. I'll keep checking this thread
Got it to work! I guess my phone just doesn't like my desktop or laptop at home :/ Thank you for the help guys
sicabaddon said:
Got it to work! I guess my phone just doesn't like my desktop or laptop at home :/ Thank you for the help guys
Click to expand...
Click to collapse
Odd. Glad ya got it to work. Trying making sure you run a windoze up date on your pc's at home if you haven't already. Saw a few posts from people before that say that helped.
sicabaddon said:
Got it to work! I guess my phone just doesn't like my desktop or laptop at home :/ Thank you for the help guys
Click to expand...
Click to collapse
Thought I'd bring this up since I saw a similar issue the other day. Turns out that it didn't like the port replicator for the laptop - the USB ports on the laptop though are fine.
garwynn said:
Thought I'd bring this up since I saw a similar issue the other day. Turns out that it didn't like the port replicator for the laptop - the USB ports on the laptop though are fine.
Click to expand...
Click to collapse
The laptop docking station? I've never use mine now that I think about it.. Good to know.
Sent from my SPH-D710 using Tapatalk 2
About 20 minutes ago I started Flashing Android Revolution HD on my device then the screen went black. Nothing's happened since then and now it won't start up or anything. What's going on?
I do believe that rom is for the international gs3.
Sent from my Galaxy S3
Well is there anything I can do at this point, or have I totally bricked my device?
Driice said:
Well is there anything I can do at this point, or have I totally bricked my device?
Click to expand...
Click to collapse
Do you know how to get into download mode a.k.a. Odin mode?
theROMinator said:
Do you know how to get into download mode a.k.a. Odin mode?
Click to expand...
Click to collapse
Yeah down volume, home, and lock button right?
I tried it and nothing. Same with recovery mode. Kies all can't detect my phone.
I guess I managed to ruin my phone :\
Driice said:
Yeah down volume, home, and lock button right?
Click to expand...
Click to collapse
Yes, sir, please get into that mode for me but first make sure your phone is off and then i'll guide you through the rest.
BTW: Are you at a computer? This requires you to download a stock image for your device which is around ~600MB.
theROMinator said:
Yes, sir, please get into that mode for me but first make sure your phone is off and then i'll guide you through the rest.
BTW: Are you at a computer? This requires you to download a stock image for your device which is around ~600MB.
Click to expand...
Click to collapse
Can you think of anything else I can do or should I go into At&T and try and get a new phone under warranty?
Driice said:
Can you think of anything else I can do or should I go into At&T and try and get a new phone under warranty?
Click to expand...
Click to collapse
Dude, this is very simple. I wouldn't recommended getting a new phone if it can be easily fixed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
theROMinator said:
Dude, this is very simple. I wouldn't recommended getting a new phone if it can be easily fixed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Ok well I can't go into recovery mode or download mode on my phone. My computer recognizes a device is being plugged in, but can't tell its my phone. What should I do?
Driice said:
Ok well I can't go into recovery mode or download mode on my phone. My computer recognizes a device is being plugged in, but can't tell its my phone. What should I do?
Click to expand...
Click to collapse
First, try this, and then let me know what happens: http://forum.xda-developers.com/showthread.php?t=1727443
theROMinator said:
First, try this, and then let me know what happens: http://forum.xda-developers.com/showthread.php?t=1727443
Click to expand...
Click to collapse
I have the tar file in PDA on ODIN, but I can't get my device into download mode because it won't respond. I tried hitting start on Odin anyway but nothing happened.
I was thinking I could tell my computer somehow the device is my phone but I'm not sure if that would help without it being in download mode.
Edit: I'm reading through the post and discovered people in a similar position to me, my charging light does turn on red with no battery in. I'll see if there's some magic fix on that thread somewhere.
Driice said:
I have the tar file in PDA on ODIN, but I can't get my device into download mode because it won't respond. I tried hitting start on Odin anyway but nothing happened.
I was thinking I could tell my computer somehow the device is my phone but I'm not sure if that would help without it being in download mode.
Click to expand...
Click to collapse
Okay so we need to focus on getting your phone into DL mode. Pull the battery for one minute and hold the power button down for ten seconds; re-insert the battery and try to get into DL mode again.
theROMinator said:
Okay so we need to focus on getting your phone into DL mode. Pull the battery for one minute and hold the power button down for ten seconds; re-insert the battery and try to get into DL mode again.
Click to expand...
Click to collapse
No luck.
The only thing I can get it to do is turn the red light on when I plug it in with no battery
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
why would you flash that rom?
theROMinator said:
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I'm reading all about how the S Series is almost impossible to really brick, so trying this USB Jig couldn't hurt I guess. I mean it's 4 bucks so I'll try it and update with how it goes
and Wond3r: Because I'm a dumbass
Subscribe to the thread. I will post my results when I get the jig. I read that it works in the thread I linked you to. Don't worry
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
lolll............
Dude sorry to say but you are done, this has happened to plenty of people on this forum. Your phone is dead (the jig WILL NOT help you, you will need a jtag/warrantee to fix it at this point. Your phone will probably say qusb_dload or something if you try to plug it into your pc, further confirming that fact.
Driice said:
I'm reading all about how the S Series is almost impossible to really brick, so trying this USB Jig couldn't hurt I guess. I mean it's 4 bucks so I'll try it and update with how it goes
Click to expand...
Click to collapse
hahaha, not this one,VERY easy to brick
theROMinator said:
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Have fun testin a jig that dont help here. YOUR PHONE IS A DOORSTOP. The link wont help because he didnt flash an international boot image, he flash a whole international rom. look at the script in an international rom vs one of your scripts. The partitioning is ****ked now.
unleashed12 said:
Dude sorry to say but you are done, this has happened to plenty of people on this forum. Your phone is dead (the jig WILL NOT help you, you will need a jtag/warrantee to fix it at this point. Your phone will probably say qusb_dload or something if you try to plug it into your pc, further confirming that fact.
Click to expand...
Click to collapse
Please listen to this guy, only comment here containing any actual sense. QHSUSB_DLOAD=kiss of death
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?
sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.
Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though
I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?
sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...
Hi,
I just got an old galaxy note II from a friend, looks like everything works well except the usb port.
It does charge fine, but the computer doesn't see it. Even tried under linux and on another computer, other cable, absolutly nothing in dmesg or lsusb even in odin download mode,
so I'm guessing the usb port of the phone is dead.
Is there any way of rooting that phone without it ?
Works fine without root but I'm so used to flash random up to date roms and stuff, I'd rather have it.
Thanks !
ulrar said:
Hi,
I just got an old galaxy note II from a friend, looks like everything works well except the usb port.
It does charge fine, but the computer doesn't see it. Even tried under linux and on another computer, other cable, absolutly nothing in dmesg or lsusb even in odin download mode,
so I'm guessing the usb port of the phone is dead.
Is there any way of rooting that phone without it ?
Works fine without root but I'm so used to flash random up to date roms and stuff, I'd rather have it.
Thanks !
Click to expand...
Click to collapse
Towelroot can help you. Install apk and you are good to go.
Press thumps up if you found this suggestion helpful.
Sent from my GT-N7100 using Tapatalk
I just tried it, it says that phone isn't supported yet.
I might need to flash an older version of the rom ? Is that possible with the normal recovery ?
ulrar said:
I just tried it, it says that phone isn't supported yet.
I might need to flash an older version of the rom ? Is that possible with the normal recovery ?
Click to expand...
Click to collapse
Nopes.
Sent from my GT-N7100 using Tapatalk
Then I guess I'll just order another usb module online and replace it. I'll open it up tonight to check it's not just a misplugged cable, just in case. Thanks anyway
Hey Guys,
I hope someone can help me.
I have a old galaxy a50 it is only booting into the download mode.
flash latest stock rom using odin
Odin can't find my connected device
Split1995 said:
Odin can't find my connected device
Click to expand...
Click to collapse
install samsung drivers
JuanTamqd21 said:
install samsung drivers
Click to expand...
Click to collapse
I've already installed them
Maybe update your drivers , like in windows update>more>optional updates or so
LR7875 said:
Maybe update your drivers , like in windows update>more>optional updates or so
Click to expand...
Click to collapse
That's the problem..
My drivers are up to date.. I can connect my other phone and this is no problem.
Just the A50 will not connected or detected by the pc.
Does the a50 charge and does the cable transfer data?
LR7875 said:
Does the a50 charge and does the cable transfer data?
Click to expand...
Click to collapse
The same cable works with the s20
And the A50 starts if I connect the cable.
No charge screen? Just straight boot to the Samsung screen and froze?
Straight to Samsung and than Downloader
LR7875 said:
No charge screen? Just straight boot to the Samsung screen and froze?
Click to expand...
Click to collapse
Need to make covid test BRB 30min 1h
Use other ports and/or charger
JuanTamqd21 said:
Use other ports and/or charger
Click to expand...
Click to collapse
As far as I know, the usb cable works flawlessly with a S20.
@Split1995 Please send me that what appears on the download mode screen.
LR7875 said:
@Split1995 Please send me that what appears on the download mode screen.
Click to expand...
Click to collapse
I've uploaded a screenshot at the Main Post of this Thread.
Odin Mode (AVB Fail)
Vbmeta Error verifying vbmeta xxxxx: OK_NOT_SIGNED (3)
CUSTOM VBMETA
VBMETA : No sign info
VBMETA .
Strange... Samsung phones have android vertified boot 2.0?
LR7875 said:
Strange... Samsung phones have android vertified boot 2.0?
Click to expand...
Click to collapse
Idk :-/
I Cannot Help You Fix Your Phone
Sorry
Samsung always does crap different. They integrated the nasty vertified boot but does not enable fastboot mode which allows disabling it. At least as far my knowledge reaches, your phone is just to me a fancy, glowing paperweight, although I know telling you that is heartbreaking.
Your options could really get up to:
Find, some other posts related, or senior members and developers who are helpful, or Google 'vertified boot Samsung bypass' as a last hope.
Define your A50 as obsolete, (maybe cry for your money then) sell it on ebay as 'parts / unfixable'. If you need the data protected, sell the body, screen, battery and dispose the motherboard in some known environmentally friendly way.
I don't recommend putting your hopes off, so I will provide some related posts from now on.
If you wanna get the data back, there is a (kind of hard) way to do it.
Unsolder your emmc chip and solder it onto a usb drive.
Also, replacing the EMMC storage chip may help as the corrupted data will be replaced, and maybe that is the answer of the problem but that requires high soldering skills which puts off most people.