Hey every one!
Flashed my first ROM and it is awesome! The Peoples Rom. Now I would like to try Carbon. I use a US Sprint S3, and I don't see my model #, Sph-L710 on the downloads lists. Do they uses another model number which is also compatible?
Also, could you please advise me on how I can find out what boot loader i Have,? Other ROMs state you need a specific boot loader and i Have no idea what mines is.
Thanks so much!
D2LTE is the unified one for all LTE models
You can find your Bootloader it by looking at Settings/About Phone... Your Bootloader should match what the Baseband says.
Thanks for taking the time to explain that to me!
It looks like my Boot loader is MK3, So i guess Carbon ROM is MK5, and its a no go?
Praz21 said:
Thanks for taking the time to explain that to me!
It looks like my Boot loader is MK3, So i guess Carbon ROM is MK5, and its a no go?
Click to expand...
Click to collapse
AOSP ROMs like Carbon do not go by the Bootloader, MK3 should work just fine, but if you and upgrade, ND8 is the latest.
bilgerryan said:
AOSP ROMs like Carbon do not go by the Bootloader, MK3 should work just fine, but if you and upgrade, ND8 is the latest.
Click to expand...
Click to collapse
Thanks! I just downloaded the nightly, copied it to my phone, but when i used my boot recovery to install from Zip its said something like, msum mismatch and did not install the zip...
The nighlty file, is less than 200 mbs. Was that the right file?
Thanks again
It means you got a bad download
bilgerryan said:
It means you got a bad download
Click to expand...
Click to collapse
Yup! I sure did.
With your help and Lacriatch over at the Carbon IRC, i was able to flash TWRP and a good download...So Loving this rom!
Thanks guys!
Related
Hi,
I had stock 4.3 firmware on my att i747 galaxy s3, then I decided to flash cyanogenmod. everything went well but i dont really like it.
Now I want to go back to stock. I tried flashing the stock rom with odin but it fails and it says this on the phone:
ODIN MODE
PRODUCT NAME: SGH-I747
CUSTOM BINARY DOWNLOAD: Yes (2 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER RP SWREV: 2
SW REV CHECK FAIL : Fused 2 > Binary 0
The android version it shows is 4.3.1 and im able to use it normally with the cyanogenmod.
What can I do to flash a stock rom back?
EDIT: used triangle away and the custom binary download says "no" now and the current binary says "samsung official" but still get the same problem.
Thank You
bryangd07 said:
Hi,
I had stock 4.3 firmware on my att i747 galaxy s3, then I decided to flash cyanogenmod. everything went well but i dont really like it.
Now I want to go back to stock. I tried flashing the stock rom with odin but it fails and it says this on the phone:
Thank You
Click to expand...
Click to collapse
You need to flash a stock ROM that has no boot loader attached to it. I just reverted my S3 back to stock from CM11 so that I could sell it. Flash a Rom.zip through recovery and it should work fine. I see you are ATT so I suggest this one: http://forum.xda-developers.com/showthread.php?t=2540998. You have the choice of Stock Rooted without bootloader which is what you will be looking for. This thread also has everything you may need. Do not attempt to use Odin to flash roms with older bootloaders or you will find major issues.
You will almost definitely need to wipe everything so back everything up and be sure to take a Nandroid.
BCSC said:
You need to flash a stock ROM that has no boot loader attached to it. I just reverted my S3 back to stock from CM11 so that I could sell it. Flash a Rom.zip through recovery and it should work fine. I see you are ATT so I suggest this one: http://forum.xda-developers.com/showthread.php?t=2540998. You have the choice of Stock Rooted without bootloader which is what you will be looking for. This thread also has everything you may need. Do not attempt to use Odin to flash roms with older bootloaders or you will find major issues.
You will almost definitely need to wipe everything so back everything up and be sure to take a Nandroid.
Click to expand...
Click to collapse
thanks for answering, sorry i dont know much about this, can you tell me which one has no bootloader on it?
bryangd07 said:
thanks for answering, sorry i dont know much about this, can you tell me which one has no bootloader on it?
Click to expand...
Click to collapse
In that thread you have 2 good options that I can see. Scroll down and you will find one ROM by upndwn4par/full and another debloated directly under it. Which you chose depends on if you want Samsung/ Google software on it. The upndwn4par file will have you closer to stock than the other. Please be sure to read a couple pages, even if you don't get any immediate knowledge from it you will become way more familiar with these processes. It's worth the time, and safer for your phone.
BCSC said:
In that thread you have 2 good options that I can see. Scroll down and you will find one ROM by upndwn4par/full and another debloated directly under it. Which you chose depends on if you want Samsung/ Google software on it. The upndwn4par file will have you closer to stock than the other. Please be sure to read a couple pages, even if you don't get any immediate knowledge from it you will become way more familiar with these processes. It's worth the time, and safer for your phone.
Click to expand...
Click to collapse
Thanks once again, i will download the debloated one. But I have a question, that won't be a stock rom right? If the bootloader is the problem is there a stock d2att 4.3 rom i can flash?
That is a stock ROM. It is just pre rooted with knox removed. It is a modified version of the Stock OTA with the problematic parts removed..
BCSC said:
That is a stock ROM. It is just pre rooted with knox removed. It is a modified version of the Stock OTA with the problematic parts removed..
Click to expand...
Click to collapse
how do i flash this rom? using the phone recovery(VU+home+power) ?
EDIT: i tried that and it failed the verification
What recovery are you using? Latest CWM?
BCSC said:
What recovery are you using? Latest CWM?
Click to expand...
Click to collapse
i don't know, the original i guess
bryangd07 said:
i don't know, the original i guess
Click to expand...
Click to collapse
You need a custom recovery to flash this. CWM or TWRP. I'm not too sure how you got to CM without one but be sure you have one and then flash the Rom from above. You can install CWM with the app 'Rom Manager'.
See here http://forum.xda-developers.com/showthread.php?t=2538991
BCSC said:
You need a custom recovery to flash this. CWM or TWRP. I'm not too sure how you got to CM without one but be sure you have one and then flash the Rom from above. You can install CWM with the app 'Rom Manager'.
See here http://forum.xda-developers.com/showthread.php?t=2538991
Click to expand...
Click to collapse
I installed CWM but now that i used cyanogen for a while im starting to like it. The only thing that I dont like is the music player. I downloaded google play but it is even worst, my playlists are not even in order. Is there any way of flashing the stock samsung music player on cyanogenmod or is it integrated with the touchwiz?
Thanks for all the help you gave me so far.
EDIT: I found this thread about ported s4 apps: http://forum.xda-developers.com/showthread.php?t=2267029, can i just flash it with CWM using cyanogenmod?
You can not flash that S4 port. It says it is specifically for the Galaxy advance. Also you are correct that the Samsung player requires Touchwiz. Try Power Amp, it has pretty good reviews and features. A 3rd party player is probably your best bet. You can cherry pick for features
BCSC said:
You can not flash that S4 port. It says it is specifically for the Galaxy advance. Also you are correct that the Samsung player requires Touchwiz. Try Power Amp, it has pretty good reviews and features. A 3rd party player is probably your best bet. You can cherry pick for features
Click to expand...
Click to collapse
I tried a lot of players and didn't like any. Flashed the ROM you indicated using CWM and it worked. Did it all for the player Everything is working fine now and I really like how it doesn't have all the bloatware from att.
Thank you very much for the help.
bryangd07 said:
I tried a lot of players and didn't like any. Flashed the ROM you indicated using CWM and it worked. Did it all for the player Everything is working fine now and I really like how it doesn't have all the bloatware from att.
Thank you very much for the help.
Click to expand...
Click to collapse
No problem dude. I always found myself going back to Touchwiz as well. Let me know if you need more help.
Ok so i've been messing with some other kernels to see if any of them would work, and needed a quick way to get out of bootloops. I haven't seen one yet so I mad a flashable Stock Kernel. Have fun.
http://www.androidfilehost.com/?fid=23329332407576394
Have you tried this with an international 4.4.2 rom? I tried an international rom earlier but wifi wouldnt work. Any ideas?
jimmydigital00 said:
Have you tried this with an international 4.4.2 rom? I tried an international rom earlier but wifi wouldnt work. Any ideas?
Click to expand...
Click to collapse
Im on Echoe rom and everything works fine?
I didn't do anything special either. Just on the 4.4 bootloader. If your on 4.3 bootloader then maybe flash the wifi/bluetooth/nfc fix
_INSPIREed said:
Im on Echoe rom and everything works fine?
I didn't do anything special either. Just on the 4.4 bootloader. If your on 4.3 bootloader then maybe flash the wifi/bluetooth/nfc fix
Click to expand...
Click to collapse
How did you get 4.4 intl rom to work on tmobile n3
Are you on 4.4.2 with the new bootloader? I did the OTA update, rooted, jnstalled twrp recovery and then tried instalking an international rom. It booted but the wifi did not work.
iamolu said:
How did you get 4.4 intl rom to work on tmobile n3
Click to expand...
Click to collapse
jimmydigital00 said:
Are you on 4.4.2 with the new bootloader? I did the OTA update, rooted, jnstalled twrp recovery and then tried instalking an international rom. It booted but the wifi did not work.
Click to expand...
Click to collapse
Yes I'm on 4.4 bootloader. I flashed the tmobile 4.4 nb4 tar. via odin. Flashed CF auto root n9005 version via Odin, and then flashed the TWRP .tar that @bigbiff posted via odin as well. Then in TWRP flashed the latest Philz recovery zip that works with 4.4 bootloader (thats my preference, I like PhilZ.) Then just downloaded and installed Echoe. By the way I had no idea International 4.4 Roms were sooo much faster than ours...its quite noticeable. WIFI and everything works out of box. no need to flash any kernels or anything.
I get stuck at Samsung Note 3 Screen..
Crazywhitie said:
I get stuck at Samsung Note 3 Screen..
Click to expand...
Click to collapse
gonna need more info if you want some help bud
_INSPIREed said:
Yes I'm on 4.4 bootloader. I flashed the tmobile 4.4 nb4 tar. via odin. Flashed CF auto root n9005 version via Odin, and then flashed the TWRP .tar that @bigbiff posted via odin as well. Then in TWRP flashed the latest Philz recovery zip that works with 4.4 bootloader (thats my preference, I like PhilZ.) Then just downloaded and installed Echoe. By the way I had no idea International 4.4 Roms were sooo much faster than ours...its quite noticeable. WIFI and everything works out of box. no need to flash any kernels or anything.
Click to expand...
Click to collapse
Can you send me the link to the Philz recover you used? I tried installing Sweet Rom (international) and it wiped my internal storage. Want to try Philz to see if that will resove that problem.
jimmydigital00 said:
Can you send me the link to the Philz recover you used? I tried installing Sweet Rom (international) and it wiped my internal storage. Want to try Philz to see if that will resove that problem.
Click to expand...
Click to collapse
its not the recovery, it's the updater script included in some international roms, you have to modify the updater script so that it doesnt do wipe internal. follow these instructions.
1. Download ROM, open .zip with winRAR or 7zip.
2. Navigate to META-INF\com\google\android
3. Drag updater-script to desktop and open in Notepad++ (http://notepad-plus-plus.org)
4. Delete the following... http://imgur.com/F7rdFCo
5. Save (make sure you save as the same format - just click save and not save as)
6. Drag back into same directory and overwrite the previous updater-script in the rom .zip
_INSPIREed said:
its not the recovery, it's the updater script included in some international roms, you have to modify the updater script so that it doesnt do wipe internal. follow these instructions.
1. Download ROM, open .zip with winRAR or 7zip.
2. Navigate to META-INF\com\google\android
3. Drag updater-script to desktop and open in Notepad++ (http://notepad-plus-plus.org)
4. Delete the following... http://imgur.com/F7rdFCo
5. Save (make sure you save as the same format - just click save and not save as)
6. Drag back into same directory and overwrite the previous updater-script in the rom .zip
Click to expand...
Click to collapse
Your the man!! Thanks
jimmydigital00 said:
Your the man!! Thanks
Click to expand...
Click to collapse
this work like a charm, it was made for 900W8 device which is same at tmobile n900t. Now we can flash any n9005 rom w/this WIFI,NFC,BT fix
http://fs1.androidfilesharing.com/74f88da21978feed#.UxjL5OddVss currently running SweetRom w/no issue about to try Omega Rom..Thanks to @Oogar
FANTASTIC SIR...good job, well needed!
Thank you.
iamolu said:
this work like a charm, it was made for 900W8 device which is same at tmobile n900t. Now we can flash any n9005 rom w/this WIFI,NFC,BT fix
http://fs1.androidfilesharing.com/74f88da21978feed#.UxjL5OddVss currently running SweetRom w/no issue about to try Omega Rom..Thanks to @Oogar
Click to expand...
Click to collapse
LITERALLY THAT MADE ME ROLL AROUND ON THE GROUND AND LAUGH MY ASS OFF.
That my friend was not made for the Canadian Variant. I and my friend MISCOM, made that fix when we started putting out Int. Roms for TMO and Canadian phones. If you go the the Stainless thread, you will see the original posting of that fix. That's why when you flash that fix it says, made by Miscom. All somebody did was change the name of the file and stick it up on other threads. I've in months only seen one person credit Miscom for the work we did. Not mad. Doesn't bother me, we made the fix and said here guys go grab it and put it on the N9005 page so everybody can fix this issue.
dragonstalker said:
LITERALLY THAT MADE ME ROLL AROUND ON THE GROUND AND LAUGH MY ASS OFF.
That my friend was not made for the Canadian Variant. I and my friend MISCOM, made that fix when we started putting out Int. Roms for TMO and Canadian phones. If you go the the Stainless thread, you will see the original posting of that fix. That's why when you flash that fix it says, made by Miscom. All somebody did was change the name of the file and stick it up on other threads. I've in months only seen one person credit Miscom for the work we did. Not mad. Doesn't bother me, we made the fix and said here guys go grab it and put it on the N9005 page so everybody can fix this issue.
Click to expand...
Click to collapse
@dragonstalker I had no idea, i came across the thread and tried it and it worked for me. I am just a user and not trying to step on n e one bad side because i know how much work y'all developer put in. With that been said thanks @miscom and @dragonstalker for the WIFI-BT-NFC fix. I used the 4.3 version but had no idea the 4.4 version wasn't original, by who posted it or started the thread no way for me to know that
iamolu said:
@dragonstalker I had no idea, i came across the thread and tried it and it worked for me. I am just a user and not trying to step on n e one bad side because i know how much work y'all developer put in. With that been said thanks @miscom and @dragonstalker for the WIFI-BT-NFC fix. I used the 4.3 version but had no idea the 4.4 version wasn't original, by who posted it or started the thread no way for me to know that
Click to expand...
Click to collapse
I wasn't blaming you. It's opensource, not like we wrote new code to do it. We just took the time to figure out how to fix make everything work.
Its funny because as you stated you had no way of knowing, people renaming it and posted it as their work do. This is probably the 5th name i've seen for this. It doesn't make me mad. Actually it makes me smile that something that was put out is still being used.
iamolu said:
this work like a charm, it was made for 900W8 device which is same at tmobile n900t. Now we can flash any n9005 rom w/this WIFI,NFC,BT fix
http://fs1.androidfilesharing.com/74f88da21978feed#.UxjL5OddVss currently running SweetRom w/no issue about to try Omega Rom..Thanks to @Oogar
Click to expand...
Click to collapse
Do you think Flash this will fix ax nb5 NFC problem
Sent from my SM-N9005 using XDA Premium 4 mobile app
iamolu said:
this work like a charm, it was made for 900W8 device which is same at tmobile n900t. Now we can flash any n9005 rom w/this WIFI,NFC,BT fix
http://fs1.androidfilesharing.com/74f88da21978feed#.UxjL5OddVss currently running SweetRom w/no issue about to try Omega Rom..Thanks to @Oogar
Click to expand...
Click to collapse
Did you do anything special to flash SweetRom? I am getting stuck at the Samsung Galaxy Note 3 screen (Set warranty Bit: kernel)
I get stuck on this screen with the stock kernel and also when I add a 4.4.2 kernel. Any ideas?
jimmydigital00 said:
Did you do anything special to flash SweetRom? I am getting stuck at the Samsung Galaxy Note 3 screen (Set warranty Bit: kernel)
I get stuck on this screen with the stock kernel and also when I add a 4.4.2 kernel. Any ideas?
Click to expand...
Click to collapse
What kernels have you tried. Do Wootever's latest . That or Civz. That's what the guys are running on Int. Tmo roms right now that i know of working.
dragonstalker said:
What kernels have you tried. Do Wootever's latest . That or Civz. That's what the guys are running on Int. Tmo roms right now that i know of working.
Click to expand...
Click to collapse
I tried civZ-SnapKat-Rev2.1-sm_n900t-4.4.2.zip
I will look for Wootever's now. Is it posted on international forum or on the t-mobile?
Thanks
I just got me an galaxy s3 today and as soon as i got it i tried to root it
I failed horribly
I think im bricked I tried to flash a custom rom it failed and now i cant boot
I do have TWRP installed and i did do a backup
I restored my backup and now it just sits at the att logo
Any help is appreciated!
(I can still access twrp and download mode)
That is good. It is not bricked
rrupert said:
That is good. It is not bricked
Click to expand...
Click to collapse
Thanks for the quick reply what can i do to fix this rrupert
For me, being fairly new, was to use the CyanogenMod installer. It does all the work for you, then you can flash whatever Rom you like.
rrupert said:
For me, being fairly new, was to use the CyanogenMod installer. It does all the work for you, then you can flash whatever Rom you like.
Click to expand...
Click to collapse
Ill try. Thanks for the help. ill tell you if it works...(fingers crossed!)
stormdude124 said:
Ill try. Thanks for the help. ill tell you if it works...(fingers crossed!)
Click to expand...
Click to collapse
actually I want to go stock and be done with it
Can you help me find a 4.3 TWRP flashable zip please? @rrupert
stormdude124 said:
actually I want to go stock and be done with it
Can you help me find a 4.3 TWRP flashable zip please? @rrupert
Click to expand...
Click to collapse
I suggest you to use Odin to restore stock Rom from www.sammobile.com
When it's done, root again and reinstall custom recovery.
DON'T EVER TRY TO DOWGRADE
I fixed it I found a thread that had JB 4.3 flashable zip because that's what came with my phone thanks for the help everyone back to sgh-i927 thread I'm a Dev and help people there
I hit the wrong button the other day while trying to reflash stock to my S3 and wiped the system folder. the brain had farted and forgotten about the lock out. only had a older version of TWRP so was only able to install Cyanogen 10.0.0.0 and now I can't flash anything else. not a newer version. not a different ROM. everything else fails. I think the error message said something about a boot loader.
it works but CM 10.0.0.0 just isn't working for me (I HAVE to have a camera for work).
any recommendations or suggestions would be greatly appreciated.
Da Captain Quack
Captain Quack said:
I hit the wrong button the other day while trying to reflash stock to my S3 and wiped the system folder. the brain had farted and forgotten about the lock out. only had a older version of TWRP so was only able to install Cyanogen 10.0.0.0 and now I can't flash anything else. not a newer version. not a different ROM. everything else fails. I think the error message said something about a boot loader.
it works but CM 10.0.0.0 just isn't working for me (I HAVE to have a camera for work).
any recommendations or suggestions would be greatly appreciated.
Da Captain Quack
Click to expand...
Click to collapse
Odin is your friend....
6th_Hokage said:
Odin is your friend....
Click to expand...
Click to collapse
yes it is. but no mater what I do Odin puts stock (or any other ROM) on and then it's boot loop until I reflash CM 10.0.0.0
I can change recovery using Odin but not the ROM.
Captain Quack said:
yes it is. but no mater what I do Odin puts stock (or any other ROM) on and then it's boot loop until I reflash CM 10.0.0.0
I can change recovery using Odin but not the ROM.
Click to expand...
Click to collapse
Use Philz recovery, do all the wipes including internal SD (not external) and flash whatever ROM you want. TWRP doesn't play as nicely on this phone as Philz.
Sent from my LG-V700
mattzeller said:
Use Philz recovery, do all the wipes including internal SD (not external) and flash whatever ROM you want. TWRP doesn't play as nicely on this phone as Philz.
Sent from my LG-V700
Click to expand...
Click to collapse
what I get back is
Using Legacy property enviornment for update-binary...
please upograde to latest binary
assert failed: getpro(ro.bootloader*) == "L710VPBLJ7" ||
last bit over and over. tried a newer CM. tried a differnt ROM. nothing. did all the wipes. only thing that would install is CM 10.0.0
Captain Quack said:
what I get back is
Using Legacy property enviornment for update-binary...
please upograde to latest binary
assert failed: getpro(ro.bootloader*) == "L710VPBLJ7" ||
last bit over and over. tried a newer CM. tried a differnt ROM. nothing. did all the wipes. only thing that would install is CM 10.0.0
Click to expand...
Click to collapse
what carrier do you currently have? and did you try to Odin all possible .tar rom files?
6th_Hokage said:
what carrier do you currently have? and did you try to Odin all possible .tar rom files?
Click to expand...
Click to collapse
Sprint is my carrier. I tried the ROMs I have. Boot-stock-dnd8-SPHl710. that won't work because of the lockout I'm told. all of the other ROMs I have are zip files. real damn confusing trying to figure out which is what. I've just spent half an hour looking and as near as I can tell all ROMs come out in .zip not .tar. I am confused and befuddled.
I don't really care what ROM to much. but CM trashes my camera and I have to have it for work.
I really do appreciate your help.
Captain Quack said:
Sprint is my carrier. I tried the ROMs I have. Boot-stock-dnd8-SPHl710. that won't work because of the lockout I'm told. all of the other ROMs I have are zip files. real damn confusing trying to figure out which is what. I've just spent half an hour looking and as near as I can tell all ROMs come out in .zip not .tar. I am confused and befuddled.
I don't really care what ROM to much. but CM trashes my camera and I have to have it for work.
I really do appreciate your help.
Click to expand...
Click to collapse
try the NJ2stock.tar in Odin and see what happens hopefully this one works for you
Captain Quack said:
what I get back is
Using Legacy property enviornment for update-binary...
please upograde to latest binary
assert failed: getpro(ro.bootloader*) == "L710VPBLJ7" ||
last bit over and over. tried a newer CM. tried a differnt ROM. nothing. did all the wipes. only thing that would install is CM 10.0.0
Click to expand...
Click to collapse
That is a JB ROM. You would have to edit out the asserts before it will flash. But instead of doing that try using Odin to flash stock NJ2. Once you have stock on there, you should flash the last official release of Philz, then flash a ROM, try WickedS5.
Follow this thread to flash NJ2: http://forum.xda-developers.com/gal.../stock-l710vpudnj2-pc-odin-flashable-t3007847
Philz Recovery: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5
WickedS5 thread: http://forum.xda-developers.com/galaxy-s3-sprint/development/rom-wicked-s5-xperience-t2983340
Sent from my LG-V700
mattzeller said:
That is a JB ROM. You would have to edit out the asserts before it will flash. But instead of doing that try using Odin to flash stock NJ2. Once you have stock on there, you should flash the last official release of Philz, then flash a ROM, try WickedS5.
Follow this thread to flash NJ2: http://forum.xda-developers.com/gal.../stock-l710vpudnj2-pc-odin-flashable-t3007847
Philz Recovery: https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/philz_touch_6.48.4-d2lte.tar.md5
WickedS5 thread: http://forum.xda-developers.com/galaxy-s3-sprint/development/rom-wicked-s5-xperience-t2983340
Sent from my LG-V700
Click to expand...
Click to collapse
YES! saying you rock is an understatment!!! thank you thank you thank you!!!
Captain Quack said:
YES! saying you rock is an understatment!!! thank you thank you thank you!!!
Click to expand...
Click to collapse
So I take it you're back up and running?
mattzeller said:
So I take it you're back up and running?
Click to expand...
Click to collapse
a bobble or two but yes. back up and running. now the camera works too lol. one quick question. is it safe to flash other ROMs from this point on? I flashed Philz recovery instead of TWRP
Captain Quack said:
a bobble or two but yes. back up and running. now the camera works too lol. one quick question. is it safe to flash other ROMs from this point on? I flashed Philz recovery instead of TWRP
Click to expand...
Click to collapse
I find Philz works better than TWRP on our devices anyway. Feel free to flash ROMs from Philz. Just don't try to Odin anything lower than your current baseband, or you will brick your device.
mattzeller said:
I find Philz works better than TWRP on our devices anyway. Feel free to flash ROMs from Philz. Just don't try to Odin anything lower than your current baseband, or you will brick your device.
Click to expand...
Click to collapse
thanks. it's a bummer I can't give you about 10 thanks clicks
off to look at other ROMS. CM doesn't seem to like the camera from what I see so it will be something else
Captain Quack said:
thanks. it's a bummer I can't give you about 10 thanks clicks
off to look at other ROMS. CM doesn't seem to like the camera from what I see so it will be something else
Click to expand...
Click to collapse
I'm glad I could be of some help to get you back up and going.
Captain Quack said:
YES! saying you rock is an understatment!!! thank you thank you thank you!!!
Click to expand...
Click to collapse
what was it that worked so people know if they have a similar issue for what ever reason?
6th_Hokage said:
what was it that worked so people know if they have a similar issue for what ever reason?
Click to expand...
Click to collapse
using Odin instead of recovery and ROM (listed below) did the trick to get back to stock. http://www.mediafire.com/download/jjg72biz2dzm6qb/L710VPUDNJ2_L710SPRDNJ2_SPR.zip
Hello,
I OTA updated from CM 10.2 stable to CM 11 M12 snapshot and I installed the gapps separately. Almost everything seems fine except for "No Service" issue. Data connection is not working, but am able to make and receive calls. There is no APN settings and adding one does not gets saved.
I searched xda and few threads state that it is due to old modem. However, this thread in xda says that the bootloader and the modem version has to be match, otherwise installing a modem with mismatching bootloader may hard brick the phone.
According to "Phone info *Samsung*" app my
Bootloader version is : I747UCDMG2
Baseband version is: I747UCDMG2
1. Do I just get the latest Modem ONLY from this thread or do I need to get BOTH bootloader and modem from dstruct2k thread.
2. If I can't solve the issue, can I just flash stable CM 10.2 back with corresponding gapps? Will it cause any such issue, because somewhere in the above thread it was mentioned that dowgrading modem might hard brick the phone too.
Thanks in advance. Any help is really appreciated.
Looks like your bootloader and modem are too old to fully supported your updated ROM.
You will need to update both; however, once updated, you can never downgrade either to be safe.
audit13 said:
Looks like your bootloader and modem are too old to fully supported your updated ROM.
You will need to update both; however, once updated, you can never downgrade either to be safe.
Click to expand...
Click to collapse
Thanks. Is there a order in which both has to be flashed like bootloader first and then modem next? Do I flash both at the same time or flash one first, reboot and then flash the other?
Also, if I don't proceed to flash the new bootloader and modem, can I safely flash CM 10.1 now without bricking the phone?
Thanks again for your reply and help.
spk_xda said:
Thanks. Is there a order in which both has to be flashed like bootloader first and then modem next? Do I flash both at the same time or flash one first, reboot and then flash the other?
Also, if I don't proceed to flash the new bootloader and modem, can I safely flash CM 10.1 now without bricking the phone?
Thanks again for your reply and help.
Click to expand...
Click to collapse
not to buttin in , cause @audit13 knows a heck of alot more than me , but this thread
http://forum.xda-developers.com/showthread.php?t=2808654
has bootloader/modem combo zip. i think mjb and ne4. just flash and it updates both at same time. be sure to read OP first though.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Both should be flashed in tandem.
Yes, you can go back to cm10.2 as cm roms don't flash a bootloader or modem.
mrrocketdog said:
not to buttin in , cause @audit13 knows a heck of alot more than me , but this thread
http://forum.xda-developers.com/showthread.php?t=2808654
has bootloader/modem combo zip. i think mjb and ne4. just flash and it updates both at same time. be sure to read OP first though.
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
audit13 said:
Both should be flashed in tandem.
Yes, you can go back to cm10.2 as cm roms don't flash a bootloader or modem.
Click to expand...
Click to collapse
Thank you very much to both of you. I followed the thread you mentioned and installed the MJB bootloader/modem combo and I got the data connectivity back. I did not install NE4 though as I dont really need it now I guess. Thanks again.
good to hear you got it fixed. :thumbup:
"all i can really do , is stay out of my own way and let the will of heaven be done"