I've been trying to figure out what is the best ROM for Note 2 N7100, I have tried a few below but even the stable versions have some issues.
1) Paranoid Android
-4.45 [STABLE] (Screen black out unexpectedly, Exchange Service Issue, System UI failing unexpectedly)
-4.43 [STABLE] (Screen black out unexpectedly)
2) CYANOGENMOD
-11 [SNAPSHOT M11] (Screen black out unexpectedly, Exchange Service Issue, System UI failing unexpectedly)
-Nightly Build (They are nightly so can't complain)
NOTE: CM 11 NIGHTLY (December 3, 2014), that build is very stable as compared to other Nightly builds.
3) SLIMKAT
4.4.4 Build 8.0 [OFFICIAL] (Sync Issue, Apps purchased in Google Play not downloading, Wifi Issue)
4) DN4
I know this is a very new ROM and they haven't released a stable version, but even after flashing the patch, it throws a lot of error.
5) PAC MAN
Nightly Build (August 25, 2014) This ROM I found very amazing, high in performance and awesome battery life. But it has the same issues as CM & PA: Screen black out unexpectedly, Exchange Service Issue, System UI failing unexpectedly.
6) OmniROM
I didn't get a good chance to go through this ROM, but it got stuck at sync as well. So removed it.
One thing very common in all these ROM's is when charging the phone in Power Off mode, the battery Icon is stuck and the phone hangs. Although, the phone is charging, but it won't start through the power button. You'd have to remove the battery and put it in again.
Any suggestions about a very stable ROM for N7100? (No TouchWiz! )
P.S: This is my first post, so please excuse any errors.
Why not ask in your device forum? This forum section is for paranoid android only
#stayparanoid
Pirateghost said:
Why not ask in your device forum? This forum section is for paranoid android only
#stayparanoid
Click to expand...
Click to collapse
Oh, I'm sorry. My bad!
Related
Hi there,
I installed PA 4.45 and it was quite buggy on my GT-I9300 (I think my Samsung Galaxy S3 is a AOSPA / legacy device).
I upgraded to PA 4.5 beta 4. Seems quite stable for me. Good job guys!
In PA OTA I see only updates for 4.6 but no update for 4.5.
My question now is (for people who have experience with PA on the GT-I9300 and PA 4.6):
Is 4.6 using more resources (since I have a legacy device, I'm concerned about performance) or the general perceived performance would be similar to 4.5?
I want to know if it's better to wait for a final 4.5 release (will there be any, or updates will come only for 4.6?) or try 4.6.
Thank you for letting me know.
I have been using PA since V4 came out on my i9300. Can say that everything up to 4.6 was amazing, but ever since flashing 4.6 beta 4 (coming from 4.5 beta 4) I have nothing but trouble. Total system freeze (low ram probably) 10 ~ 20 seconds after booting, or 5 seconds after starting the first app. Since I haven't done a clean install in a while I'm giving that a try.
If I don't forget I will post the results.
[EDIT]
Also should mention the heating problems that came with 4.6 beta 4 (but that may just be the dirty flash after all).
markheloking said:
I have been using PA since V4 came out on my i9300. Can say that everything up to 4.6 was amazing, but ever since flashing 4.6 beta 4 (coming from 4.5 beta 4) I have nothing but trouble. Total system freeze (low ram probably) 10 ~ 20 seconds after booting, or 5 seconds after starting the first app. Since I haven't done a clean install in a while I'm giving that a try.
If I don't forget I will post the results.
[EDIT]
Also should mention the heating problems that came with 4.6 beta 4 (but that may just be the dirty flash after all).
Click to expand...
Click to collapse
Thanks for sharing your experiences, I was thinking to upgrade to 4.6 beta 5, but after reading your post I'm a bit afraid...
For now I'm experiencing with 4.5 beta 4 the following problems:
Often when I set a timer, after a few minutes I get an error (dialog with error) that the clock app crashed. But the timer still works... strange. Sometimes the timer then doesn't trigger the alarm in the end.
Also I get a dialog with an error of the ui that crashed. But the system seems working well anyway: no need to restart or so, just the dialog with the error...
See screenshots in attachment...
PA 4.6beta5
I'm currently using PA 4.6beta5 on my i9300 and it's excellent!
No issue, no problem.
Never had low memory problem.
But I've a clean installation (I've wiped all before install)
I have had a LOT of trouble the past few weeks, to the point where flashing a stock rom via odin wouldn't boot and crazy stuff like that. I think it might be hardware related, but after formatting everything and reinstalling it's been working fine now. Only thing is the heating/battery drain problem. It turned out to be google+, so disabling that in apps solved the problem. Running quite smoothly for over two weeks now.
Q&A for [ROM] [NIGHTLY] [4.4.4] CyanogenMod 11 for Samsung Galaxy Nexus
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
CM11-M11 stable?
Hello,
I have a short question regarding the stability of the newest snapshot M11 of CM11. Are there any bugs which may prevent using it in a productive environment? I'm giving the device away and it probably won't be updated afterwards. M11 would replace the currently installed M7, I stopped updating regularly after having endured an unstable device for two months prior to M7 (and I do not wish to give it away having a nightly installed).
Since a long time ago the native sip client has been fixed. There are other kitkat ROMs out there for other devices which still have an audio bug rendering the sip client useless. Could someone link me to this ROM's fix so other developers could apply it to their ROMs?
I've been trying to search for it myself but I can't find it. Thanks a lot! [emoji4]
Silpion said:
Hello,
I have a short question regarding the stability of the newest snapshot M11 of CM11. Are there any bugs which may prevent using it in a productive environment? I'm giving the device away and it probably won't be updated afterwards. M11 would replace the currently installed M7, I stopped updating regularly after having endured an unstable device for two months prior to M7 (and I do not wish to give it away having a nightly installed).
Click to expand...
Click to collapse
The latest M release should be pretty stable.
Hello @Ziyan
Many thanks for your amazing work.
I just want to know that when we can expect CM 12 for Galaxy Nexus ?
Any news about M12 release? Still not seeing it on the building queue page...thanks Ziyan for your effort!
ImTheDroid said:
Hello @Ziyan
Many thanks for you amazing work.
I just want to know that when we can expect CM 12 for Galaxy Nexus ?
Click to expand...
Click to collapse
By the time they start pushing nightlies (in December), maguro should be fully functional (meaning it will be built too), or I may release test builds earlier
Codename89 said:
Any news about M12 release? Still not seeing it on the building queue page...thanks Ziyan for your effort!
Click to expand...
Click to collapse
They said they'll build it on the weekend.
When Galaxy Nexus Maguro CM M12 build?
Hello Ziyan,
[Edit]: Sorry, I saw the previous post after I posted this question.
I still don't see the M12 for Galaxy Nexus Maguro. Although I see in another thread you mentioned that it will happen once you ask the CM team to build it, but nothing seems to have happened. Just wanted to have this last one of CM11 as it might be better to keep for a long time (in the light of the fact CM12 is coming but might take some time to stabilize). So, any idea, when is the build going to take place?
Thanks...
(I would like to post in the mail thread, but my post count seems to be a problem, anyway..)
After the update to cm11 m12 my phone works really smooth.
As other I noticed that generally the rom degrades its performance after some days probably because of the memory trimm.
I also evidenced performance issues in cm 11 m11 due to Google now voice detection of "Ok google" so I disabled it.
I registered in xda to thank you.
In the CM12 roadmap [1] there's:
1) Watering down of SELINUX protections or Encryption by default. These are base protections L is introducing and we should support these items as such. If your device fails to allow encrypting, it will not get a CM sanctioned release.
Click to expand...
Click to collapse
Currently CM11 kernel has SELINUX set to permissive to fix some bugs (in the dialer iirc), but enforcing should be possible. Just have to add some rules:
https://source.android.com/devices/tech/security/selinux/validate.html
Getting encryption to work without watering it down sounds impossible when it expects hardware backing, which tuna doesn't have. [2]
(Technically tuna hw has TEE support, but google disabled it for keystore already due to a power usage bug [3])
Edit:
Seems like Google left the old software encryption still in:
https://android.googlesource.com/platform/system/vold/+/69f4ebd
(use_keymaster == 0)
Didn't look at CTS yet if one still passes without hardware keymaster.
Or what's your take on it?
[1] http://www.gadgtspot.com/2014/10/31/roundtable-cyanogenmod-12-roadmap-leaked-fun-times-ahead/
[2] http://source.android.com/devices/tech/encryption/index.html#storing_the_encrypted_key
[3] http://nelenkov.blogspot.it/2012/07/jelly-bean-hardware-backed-credential.html
Same here...
Anyone else got problems with video playback in YouTube in the 20150201 nightly?
*Deleted
sorry, delete please
SELinux
Hi there Ziyan,
I don't know if it's a choice or something went wrong in the 05-10 CM11 Weekly build for the Maguro Gnex but the SELinux is disabled... Just wanted to point it out since i know that you guys usualy build with SELinux set to Permessive...
Have a good day
SELinux
Hi @Ziyan SELinux is still disabled in last weekly...
gps fix cm11 maguro
Hi Guys,
I can't get gps fix with cm11 maguro http://forum.xda-developers.com/galaxy-nexus/development/rom-cyanogenmod-11-kvt49l-samsung-t2405147
can anyone help me with this issue? I've tried 'fastergps' app without any luck
kernel left alone, I didn't changed it
Phone freezes and reboots right after wake up in CM11 20150626 Snapshot
Hi everyone,
I just updated the phone from CM11 nightly of a version maybe two months old to the latest CM11 20150626 Snapshot, and I get this problem.
Right after the phone reboots, the locking, unlocking works fine. After a while (seems every app finishes its starting up), when I lock the phone and wake it up, the phone freezes right away and reboots a while later.
Can anyone let me know how to identify or solve this problem? Thanks.
Edit:
Ok, I just did a factory reset and now it seems to be running ok.
Edit:
I finally found out it's because I forgot to flash kernel for the PGM app.. how stupid I am.
Thank for great ROM.
@Ziyan and any people who help to create the great ROM for our device, Last year we hope to use KITKAT and now we fulfill this great ROM. Thank you every one.
Hi all,
I have a Find 7 QHD on Paranoid Android 4.6 BETA 4.
Got an OTA update this morning (BETA 5), installed it and I just get get black screen on boot that goes no further.
I also restored a previous backup and manually updated to latest beta with same results.
Has anyone with Find 7 had any luck with the latest PA 4.6 BETA 5? Wondering if it's something with my setup or the update itself.
Thanks in advance.
Same issue, tried from Beta 4 upgrade and clean install but both won't boot.
I can confirm that the latest update breaks PA completely (for me, anyway). Guess I'll just have to wait for the next big update.
Same thing happened to me...7a here
That sux, but I'm glad it's not just me.
Have seen many reports of this, guess I'm staying on BETA 4.
Hey, just giving a quick update to all o' y'all: The newest PA beta build boots without a hitch! I know that it's been out for some time now, but I just tried it and I seemed to have very few problems other than the processor refusing to go into its low power state (which also happens with Cyanogenmod for me, so I'm not sure what's going on there).
Anyway, happy flashing as always!
Q&A for [ROM] [5.0.2] [D855] Euphoria-OS 1.0 [Mar 7]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.0.2] [D855] Euphoria-OS 1.0 [Mar 7]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Screenshots would be nice
What is working ?
Could you post what is working and what is not ?
At least we'll know before hand
Thanks for your work. Downloading it right now
thank you so much
Confirmed bugs
I can confirm the bugs:
1. Nav bar dimensions don't change
2. Settings/display app crash
3. I also dont have doubletap to wake. (I am running your custom kernel.)
D855 16GB with 777jon’s Custom Kernel
good work
eally good work that is so far the best rom for lg g3 except for the wifi and the battery life I have 4.5 hrs screen on time and am at 10 % for the mahdi rom 2.9 final I 'm 2 days at 4.5 hrs screen on time the camera is also better for the rom so back to the mahdi rom 2.9 final
Thanks for the good work I 'm still waiting from
Wi-Fi not connecting
I'm finding that my Wi-Fi isn't connecting at all. During initial setup and also via Wi-Fi Settings. LG G3 D855 16GB
Euphoria-OS-1.0-d855-20150308
Kexzey said:
I'm finding that my Wi-Fi isn't connecting at all. During initial setup and also via Wi-Fi Settings. LG G3 D855 16GB
Euphoria-OS-1.0-d855-20150308
Click to expand...
Click to collapse
Has anyone found a fix for those wifi issues? I flashed multiple time (clean flash) and i still can't have a stable wifi connection.
keyboard lag
any fix?
Hello.... ?
I still got a bug on this rom, its the wifi error, its kind of hard to turn on the wifi.
Euphorua Rom D855 - Email App Crash continuosly and freeze system
Euphoria D855, OP Kernel, if i try to set a new IMAP account the Email App crash and lock the entire system. Even if i reboot, i got the "Email app has stopped working" warning, the system freeze, and no way to handle it.
I had to reinstall the ROM twice but i got it back.
---------- Post added at 09:46 AM ---------- Previous post was at 09:00 AM ----------
Code:
Any suggestion? It never goes to deep sleep...
A lot of fc's
Since the latest version everything (apps) is force closing randomly.
Dirty flash, though.
Have to try out with a full factory reset.
Hi!
In the new build of "[ROM] [5.0.2] [OFFICIAL] Euphoria-OS 1.0 [Mar 16] [D85x/LS990/VS985]" When u try to log in to the google account, the google services stop working and u never can go through that.
Thx buddy
Since the last update, I get some crashes. I also get Whatsapp crashes when I open a chat (Most annoying... I don't know if it's the ROM, but with the last the 08.03 Version, is wasn't there)
I've already re-flashed the ROM+GAPPS+777Kernel...
Crashes
The latest build of Euphoria has some Bugs, with GAPPS crash... I hope will be fixed soon. Don't ask for ETA!
Working Gapps
Crashes with any gapps.
Message-problem
Hi. I'm currently using this rom, and I really love the stock Android Lollipop look. The only problem is that evertime I send a message, containing about 2 (or more) lines, with two (or more) emojis placed after each other, the message appears as just an empty message for the person I send it to.
I've had this problem on every ASOP rom I've used. It is working perfectly fine on LG based roms.
Example:
"This is just a test. *Emoji**Emoji*
The test is not just a test, it is so much more. *Emoji**Emoji*
It is art *emoji**Emoji*"
^This message would appear as empty for the person I send it to.^
"This is just a test. *Emoji*
The test is not just a test, it is so much more.
It is art *emoji*"
^This would appear as a normal text message with normal emojis^
Any suggestion on how to fix this?
VikingWay thread has a link to the modem, and i´m sure i´ve seen it in other threads..
my g3 is faster connecting when on v20i..
edit: was an answer for http://forum.xda-developers.com/showpost.php?p=59515033&postcount=219.. but ended up here..
Today i've set an alarm clock but it doesn't ring untill I've unlocked the phone (app, alarm clock plus).
Signal Bug
is there any fix to signal bug when the Wifi turns off? (I know there is a CM issue)
Q&A for [ROM][V500][5.1.x][CM12.1] Official CyanogenMod 12.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][V500][5.1.x][CM12.1] Official CyanogenMod 12.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Stransky said:
Hi
Currently on 21/04 nightly. Getting random reboots, access internet site, suddenly tab reboots. Has also happened when I was on 18/04 and accessed settings to check for cyanogen updates (which by the way) were showing not available .
Stransky
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Having exactly the same problem although my Tab does not reboot but turns black (not 100% black, a very dim backlight still active). Doesn't do anything until I force shutdown by holding the power button.
Currently on nightly 21/04 CM 12.1 using Nova Launcher. But happened with 18/04 aswell.
Also tried RedKernel to fix the problem --> no change.
The gapps that I'm using actually replaces the stock launcher with Google's launcher. Maybe that is why I'm not having problems with the black screen anymore. I had the black screen also when I first installed 12.1 after a factory reset. The problem seems fixed now that the stock cm launcher is replaced with Google's launcher.
Does the rear/main camera finaly work with canogenmod?
Depends on which camera module you have.
problems with the firmware
I have constantly reboots plate during charging, and as you can not edit the name or avatar if not before that create what some other contact.
installation steps:
stock rom 4.2.2 -> cm 12.0 -> cm 12.1
used CWM recovery
uzenelse said:
I have constantly reboots plate during charging, and as you can not edit the name or avatar if not before that create what some other contact.
installation steps:
stock rom 4.2.2 -> cm 12.0 -> cm 12.1
used CWM recovery
Click to expand...
Click to collapse
You can edit the avatar from within the contacts application.
I would suggest a factory reset to see if that fixes the reboots while charging. I've also just posted gapps 5.1.1 in the Delta Gapps thread for cm 12.1.
Yesterday I installed the latest version. Within two hours twice I had a black screen while using Pocket. Today I did a clean install with Deltadroid gapps. I'll see what happens.
感谢发布者的辛苦工作！
最新版解决了黑屏问题吗？如果解决了那将是个伟大的进步！
[email protected] said:
最新版解决了黑屏问题吗？如果解决了那将是个伟大的进步！
Click to expand...
Click to collapse
Yes!
Black screen on LG v500 running CM 12.1
This post is related to "http://forum.xda-developers.com/lg-g-pad-83/development/rom-official-cyanogenmod-12-1-t3086899/page9" thread (but as I'm new in this forum, it does not allow me to post in that thread.
I'm using CM-12.1-20150509-NIGHTLY-v500, and I'm experiencing these "black screens".
For me, it usually happens when I'm typing something (no matter whether in Evernote, nor Inbox, nor posting a message in the Clash of Clans).
And the only way to regain the screen is rebooting the tablet.
I'm using the Swiftkey Keyboard (v5.2.2.124).
The oldest build I can recall that these black screens weren't happening is CM-12-20150304-NIGHTLY-v500. Perhaps this might give a hint on what to diff against.
Black screen cm12 v500
Got a blank screen issue with cm release of may 10th, using tweeter.
Delta gapps from deltadroid used.
Stock kernel.
ol31 said:
Got a blank screen issue with cm release of may 10th, using tweeter.
Delta gapps from deltadroid used.
Stock kernel.
Click to expand...
Click to collapse
I think this has been a problem since cm 11. It seems like it happens randomly.
It seems that this is not an isolated v500 issue. The nexus 4 has the same problem because they both use the same video card.
Experience black screen during watching YouTube or read news... Not sure how to fix it. Any clue...
eddiekhoo368 said:
Experience black screen during watching YouTube or read news... Not sure how to fix it. Any clue...
Click to expand...
Click to collapse
As you don't say much about your system...I will say you will possibly get rid of the black screen freezing by loading this kernel: Rick Roll's #15 found here: https://www.androidfilehost.com/?w=files&flid=19557
Later versions of RR's seem to not 'fix' the issue, but this #15 has fixed it for me. For a bit of info, I'm running the nightlies (now on 2015-05-11 with RR's #15) So far, so good for me.
EDIT: all you need to do is boot to recovery and load the #15 zip and reboot system on TWRP.
I am running rick kernel 18 now. Will switch to 15 once I get a black screen...
Will let u know.
I tried again. Loaded the latest nightly, all works except for moving apps to SD . indicates there is not enough room. Went back to the Korean stock ROM and no issues. I love CM12.1 on my tab s and moving apps works just fine. Am I doing something wrong?
Thank you for ur reply. At first i running R18. But having black screen n freeze. Switch to R17 now. Having the same issue but not so many time compare to R18. Will try R15 and report.
Sent from my LG-V500 using XDA Forums
Is the black screen issue fixed yet? I practically stopped using my GPad due to this issue. It happens to me very frequently and there's no rhyme nor reason to it. I may try other roms out, but I love this one so far except the crippling black screen.
phatbuddha79 said:
Is the black screen issue fixed yet? I practically stopped using my GPad due to this issue. It happens to me very frequently and there's no rhyme nor reason to it. I may try other roms out, but I love this one so far except the crippling black screen.
Click to expand...
Click to collapse
It's still not fixed in latest nightly.