So, just for a bit of background info:
I found out about the release of Lollipop for the HTC One M8 is in February. Me, being the kinda impatient type, wanted it sooner! So, having never messed around with android devices before, thought "Why not now?" And dived in to some tutorials. After unlocking my bootloader, installing TWRP as the recovery, and installing a new ROM to do the S-Off with firewater, I learned a few things: Firewater doesn't work anymore, the next best (and seemingly only) alternative costs $25, my phone wasn't booting up anymore, and I hadn't made a backup.
So yeah, that sucked. After attempting to side load the ROM and a few different ROMS, I finally managed to find a stock ROM that worked on the first load and actually booted successfully at an acceptable rate.
<b>SO WHERE I'M AT NOW</B>
Everything is fine and dandy now, with the exception of one thing: the WiFi will not turn on. I will press the WiFi "switch," and it will only become greyed out. All of my other wireless connections will work, and I am not on airplane mode (I have even switched that on and off plenty of times as well). The only solution I could find through searching was to flash the boot.img that came in the ROM, and that didn't work.
As for specs, I'm a little inexperienced, so I don't know what to provide other than this:
HTC One M8
Carrier: AT&T
Not rooted, and don't plan on it
Boot loader is unlocked
I believe it is on a stock ROM
Does anybody know how to fix this? Any help would be appreciated!
Sent from my HTC One_M8 using XDA Free mobile app
Your firmware is mismatched with the ROM you flashed.
Either flash a ROM that matches your firmware, or RUU back to stock (need to relock bootloader with s-on to run RUU).
Also, why do so many folks skip the step of not making a nandroid backup? This should be a mandatory step before doing any mods or flashing a ROM. I don't ever leave my phone without a known good nandroid or at least a known good ROM.zip.
redpoint73 said:
Also, why do so many folks skip the step of not making a nandroid backup? This should be a mandatory step before doing any mods or flashing a ROM. I don't ever leave my phone without a known good nandroid or at least a known good ROM.zip.
Click to expand...
Click to collapse
OK, so I didn't exactly NOT make a backup... I just made the wrong type of backup. I'm new to all this, and for some reason my mind thought it was OK to back up all my DATA, not to make a backup image. I feel pretty stupid about that, and you're allowed to feel the same way about me.
Also, would you have instructions on finding a ROM that fits the firmware? Like I've said, I'm new to this and I also can't find anything about it - everything assumes that I know everything there is to know already! And the fact that'll AT&T doesn't release the M8 RUUs doesn't help either.
Sent from my HTC One_M8 using XDA Free mobile app
hardcore_spaghetti said:
OK, so I didn't exactly NOT make a backup... I just made the wrong type of backup. I'm new to all this, and for some reason my mind thought it was OK to back up all my DATA, not to make a backup image. I feel pretty stupid about that, and you're allowed to feel the same way about me.
Also, would you have instructions on finding a ROM that fits the firmware? Like I've said, I'm new to this and I also can't find anything about it - everything assumes that I know everything there is to know already! And the fact that'll AT&T doesn't release the M8 RUUs doesn't help either.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Who told you there were no RUUs for AT&T?
Here ya go:
http://dl3.htc.com/application/RUU_...20.51A.4198.01L_F_release_387305_signed_2.exe
---------- Post added at 07:38 PM ---------- Previous post was at 07:14 PM ----------
redpoint73 said:
Your firmware is mismatched with the ROM you flashed.
Either flash a ROM that matches your firmware, or RUU back to stock (need to relock bootloader with s-on to run RUU).
Also, why do so many folks skip the step of not making a nandroid backup? This should be a mandatory step before doing any mods or flashing a ROM. I don't ever leave my phone without a known good nandroid or at least a known good ROM.zip.
Click to expand...
Click to collapse
People don't like to follow instructions. I ALWAYS have a recent backup. If stuff goes bad, you can go back to the way it was before you screwed stuff up. It is the most basic step when flashing/modding; and it is always step #1 on any ROM/mod thread, but people like to skip it for some reason. I guess people like to learn the hard way.
xunholyx said:
Who told you there were no RUUs for AT&T?
Click to expand...
Click to collapse
Me and the people who were looking for AT&T-branded RUUs, not Cingular! I'll give it a try, thanks a lot!
Sent from my HTC One_M8 using XDA Free mobile app
EDIT:
It worked! Thank you so much for that RUU. My phone is running great now.
hardcore_spaghetti said:
Me and the people who were looking for AT&T-branded RUUs, not Cingular! I'll give it a try, thanks a lot!
Click to expand...
Click to collapse
I don't know why they still use the "Cingular" name in the RUU title. But regardless, you will find the AT&T RUUs listed in a variety of places, including the HTC website:
http://www.htc.com/us/support/htc-one-m8-att/news/
---------- Post added at 09:19 AM ---------- Previous post was at 09:10 AM ----------
hardcore_spaghetti said:
OK, so I didn't exactly NOT make a backup... I just made the wrong type of backup. I'm new to all this, and for some reason my mind thought it was OK to back up all my DATA, not to make a backup image. I feel pretty stupid about that, and you're allowed to feel the same way about me.
Click to expand...
Click to collapse
Well, at least you thought to make a backup of some sort, which is better than a lot of folks. My rant was aimed at folks who (all too often) know well that they should make a backup, and don't bother to do so. Than are all "Uh oh, I can't boot now and didn't make a backup. What should I do?"
Modding the phone with no backup plan and no plan to recover = a bad idea.
hardcore_spaghetti said:
Also, would you have instructions on finding a ROM that fits the firmware? Like I've said, I'm new to this and I also can't find anything about it - everything assumes that I know everything there is to know already!
Click to expand...
Click to collapse
The information is all here if you read and search enough; but I'll admit the concept of "firmware" is a bit confusing.
The short answer: Boot into bootloader, and unless you've tampered with hboot in some way (not possible with s-on) the hboot number will correspond with your current firmware version, which will also tell you what software based ROMs you can run properly:
hboot 3.16 = 1.x software
hboot 3.18 = 2.x software
hboot 3.19 = 3.x software
If you look at the title or top post of each custom ROM, they will usually call out what software version the ROM is based. So you just need to find one that corresponds to your hboot number, flash it, and everything should work find. If you are looking at a specific ROM, and still can't determine what software version its based, just post a link here and we will answer that.
If you are currently on hboot 3.16 (1.x firmware) you can also relock the bootloader and run the 2.23 RUU to update to the 2.x firmware; and then be able to run 2.x software based ROMs. But with s-on, you can't update to 3.x firmware yet, until AT&T releases the corresponding OTA and/or RUU. There are methods to update to 3.x firmware with s-off.
You can read more technical info about firmware here: http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792
redpoint73 said:
Your firmware is mismatched with the ROM you flashed.
Either flash a ROM that matches your firmware, or RUU back to stock (need to relock bootloader with s-on to run RUU).
Also, why do so many folks skip the step of not making a nandroid backup? This should be a mandatory step before doing any mods or flashing a ROM. I don't ever leave my phone without a known good nandroid or at least a known good ROM.zip.
Click to expand...
Click to collapse
Hey about that your firmware doesn't match the rom HOW COULD I KNOW?
Void tracer said:
Hey about that your firmware doesn't match the rom HOW COULD I KNOW?
Click to expand...
Click to collapse
You would only know by reading or searching. But its discussed on many threads, including the various custom ROM threads (sometimes in one of the top posts of the ROM thread).
For the most part, if you are changing to a higher software number (first number in the string: 1.x to 2.x, 3.x , etc.) you will need to update your firmware accordingly. This goes mostly for Sense ROMs; although some GPE or AOSP ROMs also require certain firmwares or at least an updated hboot. Again, check the specific ROM thread for details.
redpoint73 said:
You would only know by reading or searching. But its discussed on many threads, including the various custom ROM threads (sometimes in one of the top posts of the ROM thread).
For the most part, if you are changing to a higher software number (first number in the string: 1.x to 2.x, 3.x , etc.) you will need to update your firmware accordingly. This goes mostly for Sense ROMs; although some GPE or AOSP ROMs also require certain firmwares or at least an updated hboot. Again, check the specific ROM thread for details.
Click to expand...
Click to collapse
i still don't understand .... i went for a rom called revolutionhd and got stuck in boot loop,, spent around 8 hours trying different things , after that i got lucky that a rom called maxiumushd worked , i am s-on the dev says S-on will probably face a certain problems one of them is camera issue and files disappeared , that i fixed by the way he mentioned it should be fixed , but the wifi fix You must update firmware to latest 4.xx.xxx.x i don't understand , by installing his rom didn't i update to that version? the 4.xx.xxx.x ? or i must be at the same version before i flash a rom with that version? if yes, now roms are modding the current software? not also upgrading? and in my case i was 4.4.4 i think what should i do? i can't upgrade to lolipop? i didn't study for my finals thinking the device got bricked please help me out this is the second day ...
Void tracer said:
i still don't understand .... i went for a rom called revolutionhd and got stuck in boot loop,, spent around 8 hours trying different things , after that i got lucky that a rom called maxiumushd worked , i am s-on the dev says S-on will probably face a certain problems one of them is camera issue and files disappeared , that i fixed by the way he mentioned it should be fixed , but the wifi fix You must update firmware to latest 4.xx.xxx.x i don't understand , by installing his rom didn't i update to that version? the 4.xx.xxx.x ? or i must be at the same version before i flash a rom with that version? if yes, now roms are modding the current software? not also upgrading? and in my case i was 4.4.4 i think what should i do? i can't upgrade to lolipop?.
Click to expand...
Click to collapse
Your confusion is a bit understandable. The term "firmware" is confusing. Its true that in the past, the term "firmware" has sometimes been used interchangeably with "ROM". However in this case (and most frequently when talking about this phone), we are not talking about the ROM; but rather we are talking about a number of other modules including hboot, radio, recovery, WiFi, Bluetooth and others that actually do not get flashed with the ROM. And in fact, most of these modules can't be modified by "unofficial" means unless you have s-off.
HTC has also developed a somewhat contrived situation on their recent devices, in that while they claim to be "friendly to the mod community" by letting users unlock the bootloader and flash ROMs; they also have been in the habit of making significant updates to the firmware for every major software update (update from from Android 4.4.2 to 4.4.3, etc). And if you don't update the firmware when flashing a ROM of a higher software base, you are going to run into some major issues as you have seen (most commonly broken WiFi and extreme long boot times).
For a little more explanation on firmware vs. ROM, the following link has some good info: http://forum.xda-developers.com/showthread.php?p=52484527
You can still update the firmware with s-on by installing your version's OTA of (if available) RUU. You can also flash a firmware.zip if one has been posted for your CID that is still HTC signed/encrypted. But many firmware zips are not signed, and in that case you can't flash it unless you have s-off.
Void tracer said:
i didn't study for my finals thinking the device got bricked please help me out this is the second day ...
Click to expand...
Click to collapse
You can erase the notion in your mind that this phone is ever bricked, if the screen comes on. As long as the screen comes on, this phone is virtually always recoverable. And usually not that hard, just involves knowing the correct steps.
Also one of the cardinal rules of flashing ROMs, is always have a known good nandroid backup before flashing. Having a known-good nandroid to revert to resolves a lot of "OMG I bricked the phone" moments.
redpoint73 said:
Your confusion is a bit understandable. The term "firmware" is confusing. Its true that in the past, the term "firmware" has sometimes been used interchangeably with "ROM". However in this case (and most frequently when talking about this phone), we are not talking about the ROM; but rather we are talking about a number of other modules including hboot, radio, recovery, WiFi, Bluetooth and others that actually do not get flashed with the ROM. And in fact, most of these modules can't be modified by "unofficial" means unless you have s-off.
HTC has also developed a somewhat contrived situation on their recent devices, in that while they claim to be "friendly to the mod community" by letting users unlock the bootloader and flash ROMs; they also have been in the habit of making significant updates to the firmware for every major software update (update from from Android 4.4.2 to 4.4.3, etc). And if you don't update the firmware when flashing a ROM of a higher software base, you are going to run into some major issues as you have seen (most commonly broken WiFi and extreme long boot times).
For a little more explanation on firmware vs. ROM, the following link has some good info: http://forum.xda-developers.com/showthread.php?p=52484527
You can still update the firmware with s-on by installing your version's OTA of (if available) RUU. You can also flash a firmware.zip if one has been posted for your CID that is still HTC signed/encrypted. But many firmware zips are not signed, and in that case you can't flash it unless you have s-off.
You can erase the notion in your mind that this phone is ever bricked, if the screen comes on. As long as the screen comes on, this phone is virtually always recoverable. And usually not that hard, just involves knowing the correct steps.
Also one of the cardinal rules of flashing ROMs, is always have a known good nandroid backup before flashing. Having a known-good nandroid to revert to resolves a lot of "OMG I bricked the phone" moments.
Click to expand...
Click to collapse
Thanks you big time for explaining this to me i did go to a nandroid backup of my same cid/mid and everything was good , restored using twrp i still have the wifi issue ... i tried to flash the latest OTA and it failed (after going to stock) i really don't know what to do googled everything .. do u think i should make a thread for it?
Void tracer said:
Thanks you big time for explaining this to me i did go to a nandroid backup of my same cid/mid and everything was good , restored using twrp i still have the wifi issue ... i tried to flash the latest OTA and it failed (after going to stock) i really don't know what to do googled everything .
Click to expand...
Click to collapse
You probably installed the nandroid that didn't match with your firmware, so you are going to have the same issue as with a custom ROM: Your current firmware version doesn't match the software (OS) version.
What CID, what hboot number? What nandroid did you restore?
Void tracer said:
do u think i should make a thread for it?
Click to expand...
Click to collapse
We've already been back and forth on your issue on this thread, and its relevant to this thread's topic. So NO I don't think you should make a new thread.
redpoint73 said:
You probably installed the nandroid that didn't match with your firmware, so you are going to have the same issue as with a custom ROM: Your current firmware version doesn't match the software (OS) version.
What CID, what hboot number? What nandroid did you restore?
We've already been back and forth on your issue on this thread, and its relevant to this thread's topic. So NO I don't think you should make a new thread.
Click to expand...
Click to collapse
I believe its correct here is the link to the thread : http://forum.xda-developers.com/showthread.php?t=2701376
go to nandroid backups then all other CIDS i grabbed the htc__59 here is my phone info :
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.19.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__059
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 5e4b24e4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Void tracer said:
I believe its correct here is the link to the thread : http://forum.xda-developers.com/showthread.php?t=2701376
go to nandroid backups then all other CIDS i grabbed the htc__59
Click to expand...
Click to collapse
Yes, but which one did you use exactly? There are 3 different software numbers available for your CID on the stock nandroid thread: 1.54, 2.22 and 3.32.
redpoint73 said:
Yes, but which one did you use exactly? There are 3 different software numbers available for your CID on the stock nandroid thread: 1.54, 2.22 and 3.32.
Click to expand...
Click to collapse
newest which is 3.32
Void tracer said:
newest which is 3.32
Click to expand...
Click to collapse
Your hboot (3.18) corresponds with 2.22, you want to restore that nandroid.
The 3.32 nandroid doesn't match with your 2.22 firmware. That is why WiFi is still broken.
redpoint73 said:
Your hboot (3.18) corresponds with 2.22, you want to restore that nandroid.
The 3.32 nandroid doesn't match with your 2.22 firmware. That is why WiFi is still broken.
Click to expand...
Click to collapse
so i download 2.2 and i am good to go?
Void tracer said:
so i download 2.2 and i am good to go?
Click to expand...
Click to collapse
Yes, you should be.
redpoint73 said:
Yes, you should be.
Click to expand...
Click to collapse
Hey man just installed it everything works TY big time , but umm now i want to update to the maximushd rom and i have to update as i understood to match the android version of the rom itself , i am s-on and unlocked, now i have to re-lock to flash it ? and then unlock again to flash the rom??
Void tracer said:
Hey man just installed it everything works TY big time , but umm now i want to update to the maximushd rom and i have to update as i understood to match the android version of the rom itself , i am s-on and unlocked, now i have to re-lock to flash it ? and then unlock again to flash the rom??
Click to expand...
Click to collapse
What you want to do now, is apply any available OTA updates available for your CID. You will need to update to 3.x software (Android 4.4.4) than to 4.x (Android 5.0, Lollipop). Do you know if Lollipop has been rolled out for your version?
The OTA will also update your firmware (not just the ROM). Then once you are on Lollipop firmware, you will be able to run any custom Lollipop ROMs.
You do not need to relock the bootloader to install the OTA. And I do not recommend you do so (its better unlocked).
Reason for that, once you are OTA updated to Lollipop, you can then re-install custom recovery (you need an unlocked bootloader for that) then you can install a custom ROM (such as MaximumHD as you asked).
Related
There's something that I'm a bit unclear on when it comes to RUUs
Let's say that I'd like to try out the latest Marshmallow release without waiting for the OTA and use the HTC-provided RUU .exe (3.35.617.12)
I'm on a T-Mobile branded M9 and would like to keep WiFi Calling and Visual Voicemail. If I find that I am unable to use these features in the non-branded HTC MM release, will I simply be able to use the T-Mobile branded RUU .exe (2.11.531.19) to revert back or will I be unable to as it's an older version (Android 5.1)
I'm currently still locked and S-ON
I seem to remember downgrades not being possible on my M7 once the hboot was updated to a newer version, but am a bit confused about the specifics of the M9
Thank you, and my apologies if this is a dumb question -- I've done my best to find an answer through searching
You cannot flash RUU that does not match your device variant. In this case, you would need 3.35.531.xx RUU, to try marshmallow. 3.35.617.xx won't install on your phone, unless you S-off and change the variant CID.
But once your phone is S-OFF then you are able to downgrade, too. (Although it doesn't matter whether you use a RUU.zip or a RUU.exe.)
asestar said:
You cannot flash RUU that does not match your device variant. In this case, you would need 3.35.531.xx RUU, to try marshmallow. 3.35.617.xx won't install on your phone, unless you S-off and change the variant CID.
Click to expand...
Click to collapse
Well, now I'm a bit confused as far as variants are concerned. This HTC release page states
This software upgrade comes in the form of two sequential updates. The first update will install software version 2.11.617.180 , which does not include the Android OS upgrades. The following update will install software version 3.35.617.12 , which includes the changes to the Android OS.
Click to expand...
Click to collapse
Am I correct in understanding now that the '617' portion of those two versions is what indicates the device variant? And that my device's variant is '531'?
So then it appears that the only ways for me to try out Marshmallow at this point would be:
1) Wait until HTC/T-Mobile unleash their official release and update via OTA or RUU
2) Unlock my bootloader, flash TWRP, and install whatever ROM I please
3) Unlock bootloader, S-OFF, and RUU as I please
Flippy498 said:
But once your phone is S-OFF then you are able to downgrade, too. (Although it doesn't matter whether you use a RUU.zip or a RUU.exe.)
Click to expand...
Click to collapse
And so long as I'm S-OFF I could use this particular T-Mobile RUU executable to revert back to stock at any point and then re-lock my bootloader, correct? But as long as I'm S-ON, then downgrading is not an option, even using an RUU of the '531' variant?
(bootloader) kernel: lk
(bootloader) product: htc_himaul
(bootloader) version: 1.0
(bootloader) imei: REDACTED
(bootloader) version-main: 2.11.531.19
(bootloader) boot-mode: download
(bootloader) version-baseband: 01.01_U11440601_86.09.50731G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA12000
(bootloader) cid: T-MOB010
Click to expand...
Click to collapse
Miguel_Lancaster said:
Am I correct in understanding now that the '617' portion of those two versions is what indicates the device variant? And that my device's variant is '531'?
Click to expand...
Click to collapse
Correct. 617 is the SKU for the unlocked/developer edition and 531 belongs to T-Mobile US.
Miguel_Lancaster said:
So then it appears that the only ways for me to try out Marshmallow at this point would be:
1) Wait until HTC/T-Mobile unleash their official release and update via OTA or RUU
2) Unlock my bootloader, flash TWRP, and install whatever ROM I please
3) Unlock bootloader, S-OFF, and RUU as I please
Click to expand...
Click to collapse
1) Correct.
2) You can't flash Android M Sense roms when your phone is using the Android L firmware. So you need to look for the Android L versions of the roms (e.g. ARHD 14.0 or Viper 3.5). Sense-less Android M roms like CM should be fine, though.
3) Correct.
Miguel_Lancaster said:
And so long as I'm S-OFF I could use this particular T-Mobile RUU executable to revert back to stock at any point and then re-lock my bootloader, correct? But as long as I'm S-ON, then downgrading is not an option, even using an RUU of the '531' variant?
Click to expand...
Click to collapse
Correct (both times). Although you should keep in mind that your phone will bootloop if it's not 100% stock and you lock or relock the bootloader. (I personally think there is no benefit in locking/re-locking or even setting S-OFF back to S-ON unless you want to send your phone to HTC for warranty claims.)
asestar said:
2) You can't flash Android M Sense roms when your phone is using the Android L firmware. So you need to look for the Android L versions of the roms (e.g. ARHD 14.0 or Viper 3.5). Sense-less Android M roms like CM should be fine, though.
3) Correct.
Click to expand...
Click to collapse
Hmm, and here I was thinking that ROMS included the firmware and both could be flashed through TWRP. Guess I was mistaken. Or...
asestar said:
Correct (both times). Although you should keep in mind that your phone will bootloop if it's not 100% stock and you lock or relock the bootloader. (I personally think there is no benefit in locking/re-locking or even setting S-OFF back to S-ON unless you want to send your phone to HTC for warranty claims.)
Click to expand...
Click to collapse
Phone was just purchased used, so if there's any warranty period left it probably isn't for very much longer. In the past I've gone S-OFF for all my HTC devices (Incredible, then One S, then One M7) but they've always seemed to have their own unique quirks and this M9 appears to be no different.
My main reasoning for staying S-ON/Stock at the moment is just in case I find a reason to return the device to the seller. After a few days when I'm sure everything is alright with it, I'm sure I'll be less reluctant to tweak.
Is a bootloop easily fixable?
So, to clarify (again!) --
In my phone's current state, I would be limited to Lollipop ROMs when flashing via TWRP?
So then, the shortest route to flashing custom Marshmallow ROMs would be to S-OFF and then RUU to an International Marshmallow firmware? Would I need to change CID manually or is that handled during RUU so long as I'm S-OFF?
And the safest route (in which S-OFF would be completely optional) would be to wait for the T-Mobile OTA release for Marshmallow before unlocking the bootloader and flashing TWRP?
Thanks a bunch for your responses. I'm sure this stuff gets answered all the time, but it can sometimes be difficult to find a specific answer in the depths of these boards. Plus, I find it hard to keep 100% on all development when I only buy a new device every couple of years.
I used the ARHD rom on my last device and quite liked it, but there was a T-Mobile specific variant that kept WiFi calling and all the other carrier-specific stuff. I'm pretty sure the developer has since long given up on maintaining those features., but it's my understanding that ViperOne may still have them.
Miguel_Lancaster said:
Hmm, and here I was thinking that ROMS included the firmware and both could be flashed through TWRP. Guess I was mistaken. Or...
Click to expand...
Click to collapse
The difference between rom and firmware.
Miguel_Lancaster said:
Is a bootloop easily fixable?
Click to expand...
Click to collapse
Just reflash a RUU. The problem for most non-US firmwares is that HTC doesn't provide RUUs so sometimes there is no freely accessible RUU for a specific firmware version. (The only other method besides flashing a RUU is restoring a TWRP backup or re-/flashing a custom rom which needs an unlocked bootloader and TWRP.) If someone decides to re-S-ON and to lock/relock and the rom doesn't boot then that person might not be able to fix that bootloop without this RUU service. (The same applies to S-ON users who decide to relock if the rom doesn't boot.) HTC introduced a new security feature with Android 5.1 (firmware 2.x and higher). It prevents the bootloader unlock if the option OEM Unlock isn't activated in developer options. That's why I recommend everyone staying S-OFF and unlocked unless you need to send your phone back to HTC for a warranty claim since even OTAs can be installed with an unlocked bootloader. Well, RUU.exe deny to flash with S-ON and an unlocked bootloader but there are not many RUU.exe for non-US firmware versions and you can always extract the RUU.zip from a RUU.exe. (RUU.zip files can be flashed via an external SD card even if the bootloader is unlocked.)
Miguel_Lancaster said:
In my phone's current state, I would be limited to Lollipop ROMs when flashing via TWRP?
Click to expand...
Click to collapse
Correct if you're talking about Sense roms.
Miguel_Lancaster said:
So then, the shortest route to flashing custom Marshmallow ROMs would be to S-OFF and then RUU to an International Marshmallow firmware? Would I need to change CID manually or is that handled during RUU so long as I'm S-OFF?
Click to expand...
Click to collapse
Or you use an unlocked/dev edition RUU. There is no big difference between the firmware of those two M9 versions. Nevertheless you need to change both the CID and the MID. The commands are fastboot oem writecid <enterwhicheverCIDisneeded> and fastboot oem writemid <enterwhicheverMIDisneeded>. (SKU 617 - unlocked/dev edition - CID: BS_US002 - MID: 0PJA11000; SKU 401 - international version - CID: HTC__001 - MID: 0PJA10000; SKU 531 - T-Mobile US - CID: T-MOB010 - MID: 0PJA12000)
Miguel_Lancaster said:
And the safest route (in which S-OFF would be completely optional) would be to wait for the T-Mobile OTA release for Marshmallow before unlocking the bootloader and flashing TWRP?
Click to expand...
Click to collapse
Correct.
Miguel_Lancaster said:
I used the ARHD rom on my last device and quite liked it, but there was a T-Mobile specific variant that kept WiFi calling and all the other carrier-specific stuff. I'm pretty sure the developer has since long given up on maintaining those features., but it's my understanding that ViperOne may still have them.
Click to expand...
Click to collapse
Don't know about ARHD but Viper has that feature.
Btw: Getting S-OFF is quite easy but it costs 25 USD. You simply need to use the Sunshine App. (Or you look for someone who has a java card.)
Thank you for taking the time to answer all of my questions.
No problem. Maybe those detailed answers might help other users as well. (That's at least what I hope. )
Flippy498 said:
Or you use an unlocked/dev edition RUU. There is no big difference between the firmware of those two M9 versions. Nevertheless you need to change both the CID and the MID. The commands are fastboot oem writecid <enterwhicheverCIDisneeded> and fastboot oem changemid <enterwhicheverMIDisneeded>. (SKU 617 - unlocked/dev edition - CID: BSUS_002 - MID: 0PJA11000; SKU 401 - international version - CID: HTC__001 - MID: 0PJA10000; SKU 531 - T-Mobile US - CID: T-MOB010 - MID: 0PJA12000)
Click to expand...
Click to collapse
**** --
I changed my MID to the Developer edition, but I accidentally used the letter O and not the number 0 -- so OPJA11000
Then I attempted an RUU and now my phone is stuck in the RUU screen and I can't even turn it off. Is there any way to recover this? I don't even think I can use ADB anymore.
edit: I got it to reboot by holding BOTH volume buttons and POWER. What a stupid mistake. I'll leave this here though so hopefully no one else does anything so stupid.
Yikes :silly:
edit 2: Hmm, changed MID to the correct value but I'm still getting ERROR 131 CUSTOMER ID ERROR during RUU. Will have to investigate this further. Maybe I need to relock the bootloader.
P.S. The command to change the MID actually seem to be writemid, not changemid -- figured that out through trial and error
edit 3: Relocking the bootloader still gives the same error RUU. Now I'm stumped.
edit 4: Turns out the CID should actually be BS_US002, not BSUS_002, as you told me in the earlier reply.
edit 5: Yup, fixing the CID solved the problem
Miguel_Lancaster said:
P.S. The command to change the MID actually seem to be writemid, not changemid -- figured that out through trial and error
Click to expand...
Click to collapse
Ah, sorry. I don't know why I wrote changemid. It wasn't intended. Of course it has to be writemid. I will correct the post.
Miguel_Lancaster said:
Turns out the CID should actually be BS_US002, not BSUS_002, as you told me in the earlier reply.
Click to expand...
Click to collapse
Sinc I don't know every CID by heart I copied it from a CID list I found with google. I'm going to correct that mistake, too. Thanks for clarifying.
Sorry for the hassle.
Flippy498 said:
Ah, sorry. I don't know why I wrote changemid. It wasn't intended. Of course it has to be writemid. I will correct the post.
Sinc I don't know every CID by heart I copied it from a CID list I found with google. I'm going to correct that mistake, too. Thanks for clarifying.
Sorry for the hassle.
Click to expand...
Click to collapse
I didn't brick anything and got it all figured out in the long run, so no worries. I may not have attempted this in the first place without everything explained so concisely by you earlier, so thank you. Hopefully this thread (mistakes and all) can be beneficial to others.
Seriously though, who decided it was a good idea to put a zero before 'PJA' for the CID? That's just asking for trouble.
Miguel_Lancaster said:
I didn't brick anything and got it all figured out in the long run, so no worries. I may not have attempted this in the first place without everything explained so concisely by you earlier, so thank you. Hopefully this thread (mistakes and all) can be beneficial to others.
Seriously though, who decided it was a good idea to put a zero before 'PJA' for the CID? That's just asking for trouble.
Click to expand...
Click to collapse
That whole "0" or "O" bull**** ...
Cost me 3 days of heartache getting errors...
Yeah....that structure is a horrible idea....g
I unlocked the bootloader (offical version, S-ON) and flashed Dirty Unicorns Marshmallow ROM. The battery life is plain horrible, but I'm not sure if that's because of the ROM or the phone. Now I want to flash it back to stock, mainly because my M8 shut itself off twice yesterday when I used GPS due to overheating (had to hold it near AC in the car so it wouldn't shut down again).
I read a lot of guides, but I'm really confused because HTC complicated it so much (I'm not inexperienced in flashing, had two Sony devices and a Xiaomi). Can anyone help me out?
Sent from my One M8
sunbriel said:
I unlocked the bootloader (offical version, S-ON) and flashed Dirty Unicorns Marshmallow ROM. The battery life is plain horrible, but I'm not sure if that's because of the ROM or the phone. Now I want to flash it back to stock, mainly because my M8 shut itself off twice yesterday when I used GPS due to overheating (had to hold it near AC in the car so it wouldn't shut down again).
I read a lot of guides, but I'm really confused because HTC complicated it so much (I'm not inexperienced in flashing, had two Sony devices and a Xiaomi). Can anyone help me out?
Sent from my One M8
Click to expand...
Click to collapse
What does it say next to "OS" in your bootloader menu?
xunholyx said:
What does it say next to "OS" in your bootloader menu?
Click to expand...
Click to collapse
"OS-" so basically nothing.
Sent from my One M8
sunbriel said:
"OS-" so basically nothing.
Sent from my One M8
Click to expand...
Click to collapse
That's because you are using an old version of TWRP (2.7.x.x) that had a bug that the firmware version wouldn't be listed.
Hook up your phone to your PC and get into fastboot. Enter fastboot getvar all and post the readout here, minus your serial# and IMEI
xunholyx said:
That's because you are using an old version of TWRP (2.7.x.x) that had a bug that the firmware version wouldn't be listed.
Hook up your phone to your PC and get into fastboot. Enter fastboot getvar all and post the readout here, minus your serial# and IMEI
Click to expand...
Click to collapse
Code:
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.29.214500021.1
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: HTC__032
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 76df2b54
hbootpreupdate: 11
gencheckpt: 0
First of all, update to the current TWRP version 3.0. As @xunholyx indicated, the OS number being blank means you used a really old TWRP version, which can cause a lot of issues. Then flash the ROM again (after default wipe in TWRP - data, cache and Dalvik) and see if that helps.
Or try another ROM.
If you still want to return to stock, you can get the TWRP stock backup here: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
What you want is 6.12.401.4
Although, standard operating procedure for any ROM flashing would have dictated that you made a nandroid (TWRP backup) of the stock ROM before flashing anything. If you had done so, you could have simply restore that backup to return to the stock ROM.
Thanks for the help.
Well, I didn't create a nandroid backup of stock ROM since I thought that going back to factory settings was as easy as with Sony or Xiaomi devices. This HTC stuff is way too messed up, and I don't understand why they made it that way. I didn't expect that, tbh.
Edit: just checked, the TWRP version I have is 3.0.2-0.
sunbriel said:
Thanks for the help.
Well, I didn't create a nandroid backup of stock ROM since I thought that going back to factory settings was as easy as with Sony or Xiaomi devices. This HTC stuff is way too messed up, and I don't understand why they made it that way. I didn't expect that, tbh.
Edit: just checked, the TWRP version I have is 3.0.2-0.
Click to expand...
Click to collapse
Your OS/version-main will remain blank until you flash firmware. Just flashing the newer recovery on its own won't do that
sunbriel said:
Well, I didn't create a nandroid backup of stock ROM since I thought that going back to factory settings was as easy as with Sony or Xiaomi devices. This HTC stuff is way too messed up, and I don't understand why they made it that way. I didn't expect that, tbh.
Click to expand...
Click to collapse
You should never assume anything is the same between Android manufacturers; they each have their own quirks. And you should always make a backup before flashing a ROM, root, or other mods.; doesn't matter what the manufacturer.
Returning to stock by flashing a stock TWRP backup is not complicated. Since you've already achieved unlocking the bootloader, flashing custom recovery, and custom ROM; you can certainly handle restoring to stock with a TWRP backup. You basically just download the backup file, unzip the folders, put the folders in the proper place on the phone, then Restore the backup in TWRP. The instructions in the thread I link just break it down into steps, for you convenience. But it all just boils down to getting the backup on the phone (since you didn't make one yourself) and restoring it. I even figured out what version number you needed, and told you. So how much easier do you want it?
Your version also has an RUU (HTC specific restore tool), which will return you to stock after relocking the bootloader. But to be honest, its not that complicated to restore the TWRP backup as already suggested.
I already restored everything to stock and sold the phone. The battery life was horrible even on stock (mostly below 3h SOT with very light usage).
You say I should always make a nandroid. That's true, but for instance with Sony, even if you soft brick your phone, you just downlpad a ftf file and flash it with Flashtool. Also, another reason why I didn't make a nandroid backup of stock is because I didn't have anything worth backing up - it was pure stock without any of my apps installed since the phone was freshly bought off craigslist.
Sent from my X98 Air II using Tapatalk
sunbriel said:
You say I should always make a nandroid. That's true, but for instance with Sony, even if you soft brick your phone, you just downlpad a ftf file and flash it with Flashtool. Also, another reason why I didn't make a nandroid backup of stock is because I didn't have anything worth backing up - it was pure stock without any of my apps installed since the phone was freshly bought off craigslist.
Click to expand...
Click to collapse
The point of making a nandroid prior to any mods is to backup the stock ROM, not just your personal data.
Always know how to revert to stock, before you start messing with the phone. And how to do that varies with each device. That's all I'm saying.
Hi,good afternoon,my friend brought me his HTC one m9,because i have experience with these things, i have flashed many devices of different brands but this is my first HTC device.
Well the problem is this:
He unlocked the botloader,installed TWRP ,super SU.zip (via twrp) and a custom rom with s-on,after that he lost signal,the phone does not have imei and baseband is uknown.
I've searched trough xda ,before posting this,so i came across with a thread that said that the phone can recover signal flashing a custom rom and a kernel,did that with no success. And also i've read that returning the bootloader to locked status,will allow me to flash a RUU file in order to get back to stock.
So, i relocked the bootloader,using CMD, but now the phone just boots into bootloader ,i can enter download mode aswell,but its stucked there.
Phone is recognized by windows,via fastboot.
So,the phone status is bootloader relocked,and s-on.
i´ve tried flashing the RUU via sdcard on download mode and gives me error,also i tried using fastboot commands and the result is the same,i can not flash the RUU file.
Any suggestions are very apreciated. Thanks fot your time.
kalel29 said:
Hi,good afternoon,my friend brought me his HTC one m9,because i have experience with these things, i have flashed many devices of different brands but this is my first HTC device.
Well the problem is this:
He unlocked the botloader,installed TWRP ,super SU.zip (via twrp) and a custom rom with s-on,after that he lost signal,the phone does not have imei and baseband is uknown.
I've searched trough xda ,before posting this,so i came across with a thread that said that the phone can recover signal flashing a custom rom and a kernel,did that with no success. And also i've read that returning the bootloader to locked status,will allow me to flash a RUU file in order to get back to stock.
So, i relocked the bootloader,using CMD, but now the phone just boots into bootloader ,i can enter download mode aswell,but its stucked there.
Phone is recognized by windows,via fastboot.
So,the phone status is bootloader relocked,and s-on.
i´ve tried flashing the RUU via sdcard on download mode and gives me error,also i tried using fastboot commands and the result is the same,i can not flash the RUU file.
Any suggestions are very apreciated. Thanks fot your time.
Click to expand...
Click to collapse
For download mode SD card method:
Make sure you're using an external SD card, not internal storage.
Make sure SD card is formatted properly.
Make sure file is named 100% correctly and is meant for that specific carrier /model.
No reason it shouldn't work.
Sent from my HTC6545LVW using Tapatalk
kalel29 said:
i´ve tried flashing the RUU via sdcard on download mode and gives me error,also i tried using fastboot commands and the result is the same,i can not flash the RUU file.
Click to expand...
Click to collapse
Are you sure you flashed the correct one? Some basic information about firmware versions, RUUs and instructions how to flash them can be found in my sticky thread in the general section.
Concerning the reception problem: It's important whether you tried to use a sense-based custom rom or a non-sense-based one. The mono-kernel only works with non-sense roms like CM or Candysix. Moreover the reception problem has been covered in this thread some days ago. If you want to use a sense-based rom the re-flash boot.img "trick" might be working for you, too.
Sidenote: There is absolutely no need for flashing SuperSU if you are going to erase the system and to flash a custom com. It doesn't harm the device but it's a waste of time.
Flippy498 said:
Are you sure you flashed the correct one? Some basic information about firmware versions, RUUs and instructions how to flash them can be found in my sticky thread in the general section.
Concerning the reception problem: It's important whether you tried to use a sense-based custom rom or a non-sense-based one. The mono-kernel only works with non-sense roms like CM or Candysix. Moreover the reception problem has been covered in this thread some days ago. If you want to use a sense-based rom the re-flash boot.img "trick" might be working for you, too.
Sidenote: There is absolutely no need for flashing SuperSU if you are going to erase the system and to flash a custom com. It doesn't harm the device but it's a waste of time.
Click to expand...
Click to collapse
Yes I flashed the one for my operator. Can I flash another RUU?
About your links, I'll check them when I get back from work. Thanks.
Is your phone branded by your carrier? (Can be checked by looking at the SKU of the currently installed firmware.) If not then it's the wrong RUU. Is the RUU made for the same firmware version as the one that is currently installed on the phone or does the RUU even have a newer version? If not then it's the wrong RUU.
Flippy498 said:
Is your phone branded by your carrier? (Can be checked by looking at the SKU of the currently installed firmware.) If not then it's the wrong RUU. Is the RUU made for the same firmware version as the one that is currently installed on the phone or does the RUU even have a newer version? If not then it's the wrong RUU.
Click to expand...
Click to collapse
Hi again, the phone is giving me this error :
im still lost ,hope this helps to point me in the right direction.
Code:
D:\Francisco\Desktop\HTC\fastboot_adb\fastboot_adb>fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_himaulatt
(bootloader) version: 1.0
(bootloader) imei:
(bootloader) version-main: 3.44.600.1
(bootloader) boot-mode: RUU
(bootloader) version-baseband: 01.01_U11440801_97.04.60111G_F
(bootloader) version-bootloader: 1.0.0.0000
(bootloader) mid: 0PJA11000
(bootloader) cid: HTC__332
all:
finished. total time: 0.033s
Thanks
You still didn't mention the name of the RUU you wanted to flash. However a quick search for your SKU (Telcel Mexico) showed me that there is no RUU available you could use. The only one I could find is linked in my thread and that one is too old for your phone since you can't downgrade the firmware with S-ON. You either need to re-unlock the bootloader, flash a sense-based custom rom and buy the sunshine app or try to find someone who has a java card. Both solutions would set the phone S-OFF so that you would be able to use that old RUU. Alternatively you could contact Llabtoofer (a link can be found in my thread and in my google sheet). He has a RUU service with RUUs that are not available publicly*. Neither the sunshine app, nor a java nor the RUU service are for free. Llabtoofer and the sunshine app cost nearly the same. I don't know how much you need to pay for java card services. Be aware that even if it's OK if the phone is running a custom right now** and you don't want to use any of these solutions that you still lack a way back to stock if a new OTA (like the one for Android N) gets distributed and therefore you won't be able to install it.
If you use the old RUU all OTAs that got installed on your phone will need to get re-installed.
However you choose you should read the tab "make your own backup" of my sheet after the phone got recovered and all available OTAs got installed but before anyone starts flashing anything, again. This way you will learn how to create a backup that will help you out if you face such a situation, again. Instructions how to restore such a backup correctly can be found in the tab "twrp backups".You'll always need to create a new backup when a new OTA got installed on your phone and you want to re-root it. Besides if you're willing you could upload the backup (and any upcoming ones) and share it(/them) with the xda community by posting the download link(s) in my thread.
* He wants to know the hboot version of your phone of you request his help. Since the One M9 has no hboot but an aboot and that one never got updated you can enter version 1.0.0.0000. That's the current aboot version.
** Possible solutions for recovering the reception can be found in my first post in this thread. There is no need to flash a RUU since your IMEI and your baseband are still intact but the boot.img of the rom you tried to use was/is incompatible.
Flippy498 said:
You still didn't mention the name of the RUU you wanted to flash. However a quick search for your SKU (Telcel Mexico) showed me that there is no RUU available you could use. The only one I could find is linked in my thread and that one is too old for your phone since you can't downgrade the firmware with S-ON. You either need to re-unlock the bootloader, flash a sense-based custom rom and buy the sunshine app or try to find someone who has a java card. Both solutions would set the phone S-OFF so that you would be able to use that old RUU. Alternatively you could contact Llabtoofer (a link can be found in my thread and in my google sheet). He has a RUU service with RUUs that are not available publicly*. Neither the sunshine app, nor a java nor the RUU service are for free. Llabtoofer and the sunshine app cost nearly the same. I don't know how much you need to pay for java card services. Be aware that even if it's OK if the phone is running a custom right now** and you don't want to use any of these solutions that you still lack a way back to stock if a new OTA (like the one for Android N) gets distributed and therefore you won't be able to install it.
If you use the old RUU all OTAs that got installed on your phone will need to get re-installed.
However you choose you should read the tab "make your own backup" of my sheet after the phone got recovered and all available OTAs got installed but before anyone starts flashing anything, again. This way you will learn how to create a backup that will help you out if you face such a situation, again. Instructions how to restore such a backup correctly can be found in the tab "twrp backups".You'll always need to create a new backup when a new OTA got installed on your phone and you want to re-root it. Besides if you're willing you could upload the backup (and any upcoming ones) and share it(/them) with the xda community by posting the download link(s) in my thread.
* He wants to know the hboot version of your phone of you request his help. Since the One M9 has no hboot but an aboot and that one never got updated you can enter version 1.0.0.0000. That's the current aboot version.
** Possible solutions for recovering the reception can be found in my first post in this thread. There is no need to flash a RUU since your IMEI and your baseband are still intact but the boot.img of the rom you tried to use was/is incompatible.
Click to expand...
Click to collapse
Ok,thanks, and yes,the RUU I was trying to flash I the telcel one.
I'm going to tell my fiend that he needs to pay in order to get his phone working.
Thanks again for everything. Have a nice day.
Update
I managed to unlock the bootloader again, the phone boots, but it has no signal.
Do I need sunshine and then flash any ruu?
Or what can I do? BTW my friend agreed to pay for sunshine.
kalel29 said:
Update
I managed to unlock the bootloader again, the phone boots, but it has no signal.
Do I need sunshine and then flash any ruu?
Or what can I do? BTW my friend agreed to pay for sunshine.
Click to expand...
Click to collapse
Is it a sense-based rom? If yes, did you reflash the stock boot.img? Or is it a non-sense-based rom? In that case the mono kernel which is linked above needs to be flashed for recovering the reception.
If you're currently using a sense-based rom (which is not an HTC 10 port - e.g. Viper one m9 4.3) then you can install the sunshine app and start it. The app will explain the rest of the procedure. Just google "sunshine s-off" and you'll find it. After your phone got S-OFF you simply need to try reflashing the RUU.
Flippy498 said:
Is it a sense-based rom? If yes, did you reflash the stock boot.img? Or is it a non-sense-based rom? In that case the mono kernel which is linked above needs to be flashed for recovering the reception.
If you're currently using a sense-based rom (which is not an HTC 10 port - e.g. Viper one m9 4.3) then you can install the sunshine app and start it. The app will explain the rest of the procedure. Just google "sunshine s-off" and you'll find it. After your phone got S-OFF you simply need to try reflashing the RUU.
Click to expand...
Click to collapse
The phone has the ICE rom,Twrp and superSU,I think it's a sense-based rom, sorry I can't give you more info, as I said I'm new in flashing HTC, but I'm learning thanks to you.
ICE is sense-based. It's using HTCs own launcher and framework which is called Sense. Examples for non-sense-based roms are CM, CandySix or other AOSP roms.
Depending on the version of ICE that got flashed on the phone you might need to revert back to an older version*. The newest ICE rom is based on an HTC 10 port and I've read several posts of users reporting that they couldn't use sunshine with an HTC 10 port.
* I don't know which version that would be. I've never used ICE so you would need to figure that out on your own.
Flippy498 said:
ICE is sense-based. It's using HTCs own launcher and framework which is called Sense. Examples for non-sense-based roms are CM, CandySix or other AOSP roms.
Depending on the version of ICE that got flashed on the phone you might need to revert back to an older version*. The newest ICE rom is based on an HTC 10 port and I've read several posts of users reporting that they couldn't use sunshine with an HTC 10 port.
* I don't know which version that would be. I've never used ICE so you would need to figure that out on your own.
Click to expand...
Click to collapse
So basically, no matter what rom I flash,sense or no sense based, I will need sunshine in order to have a working baseband?
No. Sunshine is needed for getting back to stock for installing upcoming OTAs. And in case you want to use a sense-based roms it's needed for being able to backup the stock boot.img. As explained before, you need to re-flash that one after you flashed the custom rom. The boot.img of 3.35.y (y is a placeholder for any possible number) custom roms isn't compatible with 3.x firmware if x is not equal to 35 (as in your case). At the moment your only option for not having to use sunshine would be flashing a non-sense-based rom and the kernel I linked in an earlier post. But as explained before you wouldn't be able to install upcoming updates like the one for Android N if you choose not to use sunshine.
Flippy498 said:
No. Sunshine is needed for getting back to stock for installing upcoming OTAs. And in case you want to use a sense-based roms it's needed for being able to backup the stock boot.img. As explained before, you need to re-flash that one after you flashed the custom rom. The boot.img of 3.35.y (y is a placeholder for any possible number) custom roms isn't compatible with 3.x firmware if x is not equal to 35 (as in your case). At the moment your only option for not having to use sunshine would be flashing a non-sense-based rom and the kernel I linked in an earlier post. But as explained before you wouldn't be able to install upcoming updates like the one for Android N if you choose not to use sunshine.
Click to expand...
Click to collapse
Finally i have signal again,flashed slim 6 and monokernel. Thank you so much,i've learned something new about HTC now im going to return the phone to my friend,also i explained what you told me in order to have a sense based rom.
I've done this whole custom rom thing back when I got the phone in 2014 or so, since then I've done no other modifications. Installing AR 53.1 was straight forward to me, DL it, put it into the SD and use TWRP to install, ect... I also tried Viper, however, I'm having some performance issues with it.
I wanted to go back to stock so I found v5 of the stock recovery for my phone, the phone runs much, much better, but I want v6 (marshmallow). I tried for a good couple of hours to find what I wanted without much luck, so I thought I would give another custom rom a try, this is where I don't know what to do.
I need HTC M8 6.12.XXX.XX firmware. The folks of LeeDrOiD say I need this firmware installed. I cannot find any kind of 6.12 firmware. I don't know if this firmware needs to be specifically for my version of the phone which is Rogers (Canada) or if any will work. I was hoping someone here can help me find this firmware, or tell me if I even need it, thank you.
Carrier - Rogers (Canada)
(bootloader) modelid: 0P6B16000
(bootloader) cidnum: 11111111
(bootloader) version-main: 4.16.401.10
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
LeeDrOiD
https://forum.xda-developers.com/htc-one-m8/development/rom-leedroid-one-m8-l-v1-0-5-t3019102
There are many ways to update firmware ... and not necessarily 6.12 firmware .. any 6.xx firmware.
But I give you the simplest and proper as you need the full firmware not some modded one so everything firmware wise will be up-to-date
1. Install full htc signed Rogers firmware - 6.13.631.7
You can get the fw_6.13.631.7.zip here : https://forum.xda-developers.com/showpost.php?p=60218734&postcount=5
2. After the firmware is installed, install the latest TWRP 3.0.2-0
https://dl.twrp.me/m8/
3. Install your custom ROM
4. done
Note : no need to relock bootloader as you have a S-Off device (assuming from the SuperCID on your bootloader as you posted above).
Oh wow, thank you. I cant tell you how long I've tried to find this on google, I've looked for rogers firmware, to stock firmware, I can't believe it didn't show that list. Thank you.
I removed everything from my Internal and SD storage using TWRP, I would now flash the firmware then from there install the rom correct? I'll go search up on how to do that then. Also, I would be grabbing the CID ROGER001? My CID is just the 1s, I just want to confirm.
Again, thank you.
Why want to remove everything .. no need.
And no need to change anything even CID ... just follow the steps I said above .. that 1,2,3,4
that's all you need to do , don't make it complicated.
Read the link, it has how to install firmware.
Ah, my understand (not much) was that I needed the new firmware before installing the rom. Alright then, time to do this.
I still cant thank you enough. If only google showed that thread...
EDIT:
Im S-OFF unlocked. I dont need to lock it?
I edited my post as I'm not familiar with that ROM.
It may not have stock kernel.
It's better, firmware first and ROM later
SpaceGold said:
EDIT:
Im S-OFF unlocked. I dont need to lock it?
Click to expand...
Click to collapse
Please read my post #2 above .. already mentioned about S-Off.
Good luck, got to go now
Thank you, take care.
Hi,
First of all, this was supposed to be my first flash. So I am very new and confused. (I get that you probably have loads of those... I am sorry)
I got a HTC One M8 that was already rooted and S-OFF, had SuperCID and everything. And I hate the 4.4.4 Android, plus no OTA updates are available to me (when I tried to check, it gets stuck). So I wanted to flash in a LineageOS 16.0. I unlocked the bootloader, got TWRP 2.8.7.0, pasted the Lineage 16.0 ZIP file, and wanted to flash it. But, I got an error "Error executing updater binary in zip [zip filename]", and so I went to check the instructions to install.
https://forum.xda-developers.com/htc-one-m8/development/rom-lineageos-16-0-htc-one-m8-t3837538
Here it says this:
- Reboot to recovery (TWRP by @Captain_Throwback) - Direct link
- Wipe /system, /data and /cache
- Install LineageOS zip package
and I did that to see if it changes anything, Nope, it didn't. I tried to reboot the phone to get it fixed (someone in another thread suggested getting an md5 file for it).
And after the reboot I am stuck on HTC logo screen, can't shut it down at all. I can't use ADB because it doesn't see the device, so I can't getvar all. I do remember that my version-bootloader was 3.19.0.0000, but that's all.
I am not asking for a full guide on what to do, because it's probably impossible, but can anyone at least tell me how to proceed next? I'd love to turn off the phone and at least try to do something with TWRP. (I didn't have a backup, yes I am an idiot)
EDIT: Holding volume up and power button to do the reset just turns off the screen for a few secs then goes to HTC logo screen again.
Okay, I waited for it to discharge so I can get to the bootloader. I will post getvar when it charges.
EDIT: here we go
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.08.20.0916
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.30.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8a0f02ff
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I basically just want anything to work now, even stock will be okay (but 6.0 at least)
1st edit your last post & remove your IMEI/MEID unless you want it stolen...
when you wiped /system in TWRP & your zip didn't flash, u lost your ROM
easiest way to get the phone back up & working is to flash the RUU, looks like you currently have 3.30.651.2 (very old)
here is the 3.30.651.2 exe version: https://androidfilehost.com/?fid=95784891001604379
or to update to the latest version 6.20.651.3:
http://dl3.htc.com/application/RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3.exe
OMJ said:
1st edit your last post & remove your IMEI/MEID unless you want it stolen...
Click to expand...
Click to collapse
Yeah, I forgot, thanks for reminding.
So do I just run the .exe with my phone plugged in my PC while in bootloader? Or do you mean TWRP/adb flashing?
gr0za said:
Yeah, I forgot, thanks for reminding.
So do I just run the .exe with my phone plugged in my PC while in bootloader? Or do you mean TWRP/adb flashing?
Click to expand...
Click to collapse
yes, run exe from pc while connected to phone
OMJ said:
yes, run exe from pc while connected to phone
Click to expand...
Click to collapse
3.30.651.2 worked, 6.20.651.3 did not ( I tried it first). To be honest I'm so damn glad it works, because I ain't a Sprint user, but somehow Orange works. Got all the bloaty Google Aps that I don't give an f about, but at least it's working. Hopefully I can go to 6.20 next, I'm gonna try. BTW, will flashing GApps remove all the unnecessary Sprint apps? Or do I have to do something different with it? (I don't need neither the GApps not the Sprint apps, but this phone seems to be a Sprint one and I guess I have to deal with it)
EDIT: yeah, 6.20 doesn't work, it gives me Error 155 - Error updating ROM. I remember hitting up HTC live support once in desperation, and the guy told me I have to upgrade to Lollipop first. But where do I even find a RUU for that?
gr0za said:
3.30.651.2 worked, 6.20.651.3 did not ( I tried it first). To be honest I'm so damn glad it works, because I ain't a Sprint user, but somehow Orange works. Got all the bloaty Google Aps that I don't give an f about, but at least it's working. Hopefully I can go to 6.20 next, I'm gonna try. BTW, will flashing GApps remove all the unnecessary Sprint apps? Or do I have to do something different with it? (I don't need neither the GApps not the Sprint apps, but this phone seems to be a Sprint one and I guess I have to deal with it)
EDIT: yeah, 6.20 doesn't work, it gives me Error 155 - Error updating ROM. I remember hitting up HTC live support once in desperation, and the guy told me I have to upgrade to Lollipop first. But where do I even find a RUU for that?
Click to expand...
Click to collapse
yeah I vaguely recall the RUU checks your current version & must be a certain level, so you'll probably need to flash a 4.x.651.x RUU 1st
GApps probably only adds Google apps, I doubt it removes anything. once you get up to 6.20, you can root the phone (I recommend Magisk) then use a file explorer like Root Explorer to mount /system & then delete the bloat u dont want. You can also do this in twrp.
the other option is to flash a custom ROM that removes the bloat....my ROM removes bloat but retains pertinent Sprint apps
OMJ said:
yeah I vaguely recall the RUU checks your current version & must be a certain level, so you'll probably need to flash a 4.x.651.x RUU 1st
GApps probably only adds Google apps, I doubt it removes anything. once you get up to 6.20, you can root the phone (I recommend Magisk) then use a file explorer like Root Explorer to mount /system & then delete the bloat u dont want. You can also do this in twrp.
the other option is to flash a custom ROM that removes the bloat....my ROM removes bloat but retains pertinent Sprint apps
Click to expand...
Click to collapse
Alright, once I flashed the Sprint RUU, all of a sudden I have OTA updates. I'm getting to 6.20 now, so everything's fine.
Yeah, I will consider removing them the way you said. Also, I don't really need any Sprint apps, as I am not a Sprint client anyway, but I reckon some are better left unchecked. Much, much appreciated for the help and the links.
gr0za said:
(bootloader) version-main: 3.30.651.2
Click to expand...
Click to collapse
This was the main problem with flashing Lineage, your firmware (hboot, radio, etc.) was much too old. The current ROMs are not compatible with the old firmware. Now that you're updated to Marshmallow, I'll bet Lineage will install correctly (of course, you need to install TWRP again, etc.).
---------- Post added at 01:01 PM ---------- Previous post was at 12:59 PM ----------
gr0za said:
Holding volume up and power button to do the reset just turns off the screen for a few secs then goes to HTC logo screen again.
Click to expand...
Click to collapse
Hold vol up and power button to force a reboot. The moment the screen goes dark, signaling it is about to reboot, slide your finger from vol up, to vol down, and don't let go. This should get you into bootloader.
As long as the screen comes on, you can get into bootloader. Exception is, if your vol rocker is broken!
---------- Post added at 01:04 PM ---------- Previous post was at 01:01 PM ----------
OMJ said:
yeah I vaguely recall the RUU checks your current version & must be a certain level, so you'll probably need to flash a 4.x.651.x RUU 1st
Click to expand...
Click to collapse
Version check is okay if the RUU is same or greater version number (and skipping versions is usually okay). You can't go backwards (downgrade), is all.
There was a peculiar requirement on Marshmallow RUUs for US carrier versions of the M8. It is required to flash the appropriate Marshmallow firmware by fastboot, before the RUU would work, if coming from Lollipop or lower.
redpoint73 said:
This was the main problem with flashing Lineage, your firmware (hboot, radio, etc.) was much too old. The current ROMs are not compatible with the old firmware. Now that you're updated to Marshmallow, I'll bet Lineage will install correctly (of course, you need to install TWRP again, etc.)
Click to expand...
Click to collapse
Are you sure of this? I have a Sprint variant. And I found conflicting info whether Lineage works on Sprint or doesn't work.
gr0za said:
Are you sure of this? I have a Sprint variant. And I found conflicting info whether Lineage works on Sprint or doesn't work.
Click to expand...
Click to collapse
Not 100%, as I don't personally own the Sprint version M8. But what I can say:
1) The Lineage 16 thread says: "Builds are compatible with all M8 single SIM variants (m8ul, m8vzw and m8spr)."
Now the identifier "m8spr" isn't a correct one I've ever seen attached to the M8. But I think they mean the Sprint variant. Correct product ID would be M8_whl.
2) Instance of custom ROMs not working on M8 CDMA variants (Sprint and Verizon) are mainly due to the fact that those variants use a different Sense kernel. So mostly only applied to Sense ROMs. AOSP ROMs (in particular Lineage) which use their own kernel, work okay with the CDMA variants, far as I've seen.
3) Your firmware is so out to day, it will not work with any of the current ROMs. And when I say current, I mean any from the past several years. You should definitely update the firmware in any case, as it will cause lots of problems with custom ROMs, and no good reason to stay on the old firmware. Once firmware is updated, it is not hard to flash TWRP and try Lineage again. I think it will work, and there is certainly no harm in trying, even if it doesn't. The worst case scenario is that you flash a more updated (Marshmallow) version of the stock Sprint ROM. Which is still better than where you started with all this.
redpoint73 said:
2) Instance of custom ROMs not working on M8 CDMA variants (Sprint and Verizon) are mainly due to the fact that those variants use a different Sense kernel. So mostly only applied to Sense ROMs. AOSP ROMs (in particular Lineage) which use their own kernel, work okay with the CDMA variants, far as I've seen.
3) Your firmware is so out to day, it will not work with any of the current ROMs. And when I say current, I mean any from the past several years. You should definitely update the firmware in any case, as it will cause lots of problems with custom ROMs, and no good reason to stay on the old firmware. Once firmware is updated, it is not hard to flash TWRP and try Lineage again. I think it will work, and there is certainly no harm in trying, even if it doesn't. The worst case scenario is that you flash a more updated (Marshmallow) version of the stock Sprint ROM. Which is still better than where you started with all this.
Click to expand...
Click to collapse
I updated the firmware. I now have this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-main: 6.20.651.3
But the SIM doesn't work with Lineage anyway, just flashed in anew and tried. The old Sprint 6.0 ROM that I RUU'd has the same issue. Could it be the radio version, or the firmware? Because it used to work, with some troubles, but still.
gr0za said:
Could it be the radio version, or the firmware? Because it used to work, with some troubles, but still.
Click to expand...
Click to collapse
The radio is part of the firmware. Not sure why your SIM would have troubles with the newer radio (if that is the case).
You can try this: https://forum.xda-developers.com/htc-one-m8/general/how-to-convert-cdma-m8-sprint-vzw-gsm-t3303812
Or you can try flashing back to RUU 3.30.651.2 and see if there is any change.
redpoint73 said:
The radio is part of the firmware. Not sure why your SIM would have troubles with the newer radio (if that is the case).
You can try this: https://forum.xda-developers.com/htc-one-m8/general/how-to-convert-cdma-m8-sprint-vzw-gsm-t3303812
Or you can try flashing back to RUU 3.30.651.2 and see if there is any change.
Click to expand...
Click to collapse
Omg, how come I didn't see this thread. Thanks so much, I will try once I get back home.
I hope this thread isn't problematic, because I moved the goalpost since creating it. But I'd rather not create a thread every time I have a problem...
gr0za said:
I hope this thread isn't problematic, because I moved the goalpost since creating it. But I'd rather not create a thread every time I have a problem...
Click to expand...
Click to collapse
The problems are all related, and probably the same root cause (Sprint version, firmware, etc.). I agree it is most appropriate to keep everything to this one thread.