Hi everyone. I just want to ask a question about my s3. So here is the scenario:
I brought my s3 locked to rogers to a CP technician and asked him if he could unlock my s3, he then told me that he can unlock it even though it is in 4.3 firmware. I don't know what he did but the only thing that I know is that he upgraded my s3 to 4.4.2 and he also rooted it. When he gave it back to me, I can already use any sim card so I guess that the unlocking is successful. The problem occured when I got home, my phone says it is in emergency calls only so i tried to toggle airplane mode on/off if it would fix the problem and it fixed it, I can call my phone again but then after 30 secs of toggling airplane mode to off, it would eventually cant receive or make calls or text. But when i toggle airplane mode on/off again, it can receive or make calls and texts but after 30 secs the problem occurs again. I go back to the CP technician to ask him what's happening but when I'm in their area, the phone works like a charm. I don't even need to toggle airplane mode on/off. And it can also receive or make calls/texts in their area. But when I go back to our place the problem occurs again.
BTW, my ImEI is still the same at the back of the phone if this info is needed.
Thank you everyone and i hope my problem will be solved.
Can you change network modes on the phone?
audit13 said:
Can you change network modes on the phone?
Click to expand...
Click to collapse
Yes I can change network modes, and everytime I change, the problem occurs too. It'll work for 30 secs then after 30 secs I cant receive and send text/calls.
Did it do this before unlocking?
audit13 said:
Can you change network modes on the phone?
Click to expand...
Click to collapse
audit13 said:
Did it do this before unlocking?
Click to expand...
Click to collapse
No sir. I can still do it even after unlock
So the signal was bad near your house before and after unlocking?
audit13 said:
So the signal was bad near your house before and after unlocking?
Click to expand...
Click to collapse
No sir, I can even get a full signal on my phone but then it can't send or receive text messages and calls
poqi_ako said:
No sir, I can even get a full signal on my phone but then it can't send or receive text messages and calls
Click to expand...
Click to collapse
So your phone behaved this way before and after unlocking?
What baseband is on your phone?
audit13 said:
So your phone behaved this way before and after unlocking?
What baseband is on your phone?
Click to expand...
Click to collapse
it is just after unlocking because i've never used it yet with its rogers sim card, this phone was just given to me by my aunt and I live in different country. Before unlocking it does not have this kind of problem, my aunt can use it with its original rogers sim card fine.
Btw. The baseband of my phone is I747MVLUNF2
Is the bootloader the same?
There is updated firmware on sammobile.com for the i747m.
audit13 said:
Is the bootloader the same?
There is updated firmware on sammobile.com for the i747m.
Click to expand...
Click to collapse
the bootloader is still the same. If updated my firmware, i think my phone won't be unlocked already.
Once the phone is unlocked, it will remain permanently unlocked.
audit13 said:
Once the phone is unlocked, it will remain permanently unlocked.
Click to expand...
Click to collapse
Thank you for the reply mate, I will try to update my phone, should I still use the rogers i747m rom?
another question, can i try to install other roms like cyanogenmod or other custom roms, will it still be unlocked? do you have any suggestion for a good rom? Thanks mate. cheers
You can flash a stock Rogers ROM. After that, you can install Philz Touch recovery, backup your current ROM, flash another a custom ROM (I like Liquidsmooth), and try it out. If you want to go back to stock, boot into recovery, and restore your backup.
audit13 said:
You can flash a stock Rogers ROM. After that, you can install Philz Touch recovery, backup your current ROM, flash another a custom ROM (I like Liquidsmooth), and try it out. If you want to go back to stock, boot into recovery, and restore your backup.
Click to expand...
Click to collapse
Hi sir, I found out that I'm on the latest firmware already, it's 4.4.2 already so i don't need to get it from sammobile already, will i just skip the flashing on stock rogers rom step and proceed already in installing Philz Touch recovery to install a new rom. Thank you so much sir.
Connect via wifi and install any ota updates. Then install philz and a custom rom. You may also need to install gapps if they are not included in the rom.
Related
Hi Guys, I am having a weird problem that needs your help. I have been using my unlocked Nitro HD (P930) with the official stable CM9 rom. After hearing all the goods of miui, i gave it a try (with full wipe, data/factory reset, cache partition, and Dalvik Cache). After flashing it, the first thing that poped out said the network is locked and the page for sim unlock was shown. I thought the miui might re-lock my sim so I entered my unlock code. Then it said, "andorid.com has stopped". All i could do is to forget the unlock and went on to the miui home screen. After that my phone cannot pick up any signal at all. I used nano backup to restore my original CM9, everything seemed to work fine but it just couldn't pick up any signal. I went to mobile network settings to select the netwrok operators, it failed everytime. I tried entering 2945#*930# in dialer, it only said "Mobile network not available".
I tried to flash the same miui or my CM9 rom again, but my phone still couldn't pick up any signal.
Thanks if anyone can help.
hk_chiang said:
Hi Guys, I am having a weird problem that needs your help. I have been using my unlocked Nitro HD (P930) with the official stable CM9 rom. After hearing all the goods of miui, i gave it a try (with full wipe, data/factory reset, cache partition, and Dalvik Cache). After flashing it, the first thing that poped out said the network is locked and the page for sim unlock was shown. I thought the miui might re-lock my sim so I entered my unlock code. Then it said, "andorid.com has stopped". All i could do is to forget the unlock and went on to the miui home screen. After that my phone cannot pick up any signal at all. I used nano backup to restore my original CM9, everything seemed to work fine but it just couldn't pick up any signal. I went to mobile network settings to select the netwrok operators, it failed everytime. I tried entering 2945#*930# in dialer, it only said "Mobile network not available".
I tried to flash the same miui or my CM9 rom again, but my phone still couldn't pick up any signal.
Thanks if anyone can help.
Click to expand...
Click to collapse
Have you checked your APN settings?
you may need to reflash another baseband as CWM doesn't backup baseband so your phone failed even after restoring. I think you can find the cwm-flashable baseband on the forum.
lordcheeto03 said:
Have you checked your APN settings?
Click to expand...
Click to collapse
I set and save the APN but the APNs page remains blank after I have entered things like PROXY, MCC, etc.
arda99 said:
you may need to reflash another baseband as CWM doesn't backup baseband so your phone failed even after restoring. I think you can find the cwm-flashable baseband on the forum.
Click to expand...
Click to collapse
Thanks for the reply. I found Drumist's threat about those CWM flashable baseband. I tried the v10j and the v10f, but none of them work. Sorry for asking this dumb question but what should I do next?
hk_chiang said:
Thanks for the reply. I found Drumist's threat about those CWM flashable baseband. I tried the v10j and the v10f, but none of them work. Sorry for asking this dumb question but what should I do next?
Click to expand...
Click to collapse
Someone else commented before about their phone re-locking itself without explanation. The solution was just to unlock it again. I'm assuming you still have the unlock code?
The problem is that custom ROMs are incapable of unlocking the phone. You have to return to a stock ROM to perform the unlock, after which you can then return to a custom ROM. The stock ROM can be a CWM-flashable version for convenience.
drumist said:
Someone else commented before about their phone re-locking itself without explanation. The solution was just to unlock it again. I'm assuming you still have the unlock code?
The problem is that custom ROMs are incapable of unlocking the phone. You have to return to a stock ROM to perform the unlock, after which you can then return to a custom ROM. The stock ROM can be a CWM-flashable version for convenience.
Click to expand...
Click to collapse
You are absolutely right! I flashed back to stock and do the sim unlock again. Now everything is back to normal!!!
This topic is interesting and this can happen to every one. My phone is unlocked too .
I have two questions !!?
1.what 2945#*930 do ?
2. Every time i wana flash a new rom via cwm i dont wipe dalvik cash , what dose it do ? Is it important ?
Sent from my LG-Nitro HD using Tapatalk 2
nss007 said:
This topic is interesting and this can happen to every one. My phone is unlocked too .
I have two questions !!?
1.what 2945#*930 do ?
2. Every time i wana flash a new rom via cwm i dont wipe dalvik cash , what dose it do ? Is it important ?
Sent from my LG-Nitro HD using Tapatalk 2
Click to expand...
Click to collapse
1. 2945#30# is to bring up the sim lock page, where you can enter your unlock code. But it seems to me it doesn't work when your phone is already unlocked or you have a custom rom (just like what Drumist said)
2. I wiped it every time I flash a new rom just to make sure my phone is complete "clean", but I have no idea what it does :silly:
NO signal from the operator network
Hi everybody,
I have an unlocked LG NITRO HD - AT&T, I flashed MIUI rom, after finishing it did not open the phone!!
Then I flashed CM10, but the phone did not get any signal from the operator network :crying:, I changed the sim card with another operator but the problem still there!!!!
Can you help me ?
hng2000 said:
Hi everybody,
I have an unlocked LG NITRO HD - AT&T, I flashed MIUI rom, after finishing it did not open the phone!!
Then I flashed CM10, but the phone did not get any signal from the operator network :crying:, I changed the sim card with another operator but the problem still there!!!!
Can you help me ?
Click to expand...
Click to collapse
Seems you are having the same problem as I do. Simply flash back to stock rom and then enter the sim unlock code again, then your phone should be back to normal.
Hey guys,
Looking for some help here. For what ever reason the unlock code that T-Mobile sent me does not work - resulting in T-Mobile giving me a $200 credit which is nice, but I would still like to get my phone working with ATT.
I have downgraded to 4.1.1 to do the free unlock methodhttp://forum.xda-developers.com/showthread.php?p=34661189, but my baseband is still at UVUCMK7. I have tried rebooting the phone into recovery mode and installing Stock-TMO-T889UVALK8-Kernel.zip but although it says it was successful, the baseband is not changed.
Any ideas? Help?
Thanks
DB
What happens when you put in an AT&T SIM?
kozmo21 said:
What happens when you put in an AT&T SIM?
Click to expand...
Click to collapse
When I follow the unlock code it works all the way through to where they say go back to NETWORK LOCK and choose option 4. Option 4 is not there.
When I reboot with the ATT sim it simply asks me for the network unlock code.
So Baseband is still: UVUCMK7, Android version is 4.1.1, Kernel is 3.0.31-598701
DB
dabajan said:
When I follow the unlock code it works all the way through to where they say go back to NETWORK LOCK and choose option 4. Option 4 is not there.
When I reboot with the ATT sim it simply asks me for the network unlock code.
So Baseband is still: UVUCMK7, Android version is 4.1.1, Kernel is 3.0.31-598701
DB
Click to expand...
Click to collapse
Flash the VALJ1 modem from this thread... http://forum.xda-developers.com/showthread.php?t=2102380 then try the unlock again.
kozmo21 said:
Flash the VALJ1 modem from this thread... http://forum.xda-developers.com/showthread.php?t=2102380 then try the unlock again.
Click to expand...
Click to collapse
Ok, I installed Mobile Odin Lite and used that to flash the modem and looks like I have success!
Thanks for the links and advice.
Now to get mobile data and LTE to work.
DB
dabajan said:
Ok, I installed Mobile Odin Lite and used that to flash the modem and looks like I have success!
Thanks for the links and advice.
Now to get mobile data and LTE to work.
DB
Click to expand...
Click to collapse
Once the device is unlocked you will need to go back to an LTE enabled modem. Your previous radio would be your most likely solution.
Hastily spouted for your befuddlement
I have a T-mobile Samsung Note 2 (SGH-T889), that I'm trying to unlock. I have downloaded the file from the links listed here on XDA. I have already downloaded Odin307 and the Samsung USB driver. My problem is Everytime I put connect the phone, open Odin, and put the phone in download mode and add the file to Odin then while it says Please Wait.. (just a few seconds after adding the file) then Odin has Not Responding come across the top. I have deleted all the things I downloaded and re-downloaded them after it did that a few times and its still doing it. I have tried the downloads from different sites and it doesn't seem to make a difference.
Can Anyone Please Help me?
Thanks to Anyone who will take the time to help me.
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
blu422 said:
Is it possible to Sim unlock 4.4.2? Maybe by flashing a 4.1.1 modem?
Click to expand...
Click to collapse
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
creepyncrawly said:
By Sim unlock, do you mean you want to use an AT&T phone on another carrier? If that's what you are looking for, give me a few minutes to test something.
Click to expand...
Click to collapse
Isn't that what a sim unlock is? Correct me if I have it wrong.
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
creepyncrawly said:
Yes, of course.
But I am fairly new to the note 2 so I don't have much stored up information. I now see a post that indicates that flashing a certain 4.1.1 modem, MJ2 I think, gives the user a service menu where you can change the unlock setting. So now the OP's question makes sense. Only he should have been able to find the same post I did.
In a minute, as soon as my wife lets me borrow her phone, I'm going to test an unlock tool I know about to see if it works on 4.4.2 stock.
Click to expand...
Click to collapse
Yes, but that's for 4.1.2 idk if it will work with 4.4.2 I just don't wanna accidentally ruin my phone. And I think you mean LJ2 not MJ2 and thanks that'd be great if you could keep me posted
emeianoite said:
Ive flashed over 24 gn2 and s3's through old modems and menu. There's a sticky about it.
Click to expand...
Click to collapse
Were any of them on 4.4.2?
blu422 said:
Were any of them on 4.4.2?
Click to expand...
Click to collapse
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
At one time, there was a free app on XDA called GalaxSim Unlock. For some reason, the developer pulled the free app download, and the only version then available was the paid version on Play. I have a copy of the free one from before it was pulled, and it works on the Captivate and the Galaxy S II, and some other galaxy phones, not sure which ones. So I tried it tonight on my wife's Note 2 which is running Stock NE5 with TWRP recovery and has the MC3 boot loader. However, the unlock failed, saying unable to read nvdata. So it's apparently a no go on this phone.
Bajanman said:
The dialer codes that worked on 4.1.1 to unlock the phone via the hidden menu. Does not work on 4.4.2 anymore. And being you took the ota update, there's no way of downgrading you firmware...
Sorry to tell you..
Another way is to contact AT&T by email, about unlocking the phone. Can't remember what the exact name is, but goggle search it. They'll send you the SIM code, if the phone is out of contact!!! Takes about 2-3 days when I did my skyrocket to run on TMO.
Just my 2¢®™
Sent from my T889 N2/N3/S5..
Click to expand...
Click to collapse
That only works if the contract the phone was in was not defaulted, and or you are the original owner of the phone.
re: sim unlock
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
jsdad said:
I recently bought a soft bricked SGH-I317 (stuck on "firmware upgrade encountered and issue"). I tried flashing LJ2 firmware and got it to change to being hung on the "Samsung Note II" logo. I think this is when it changed as I was trying all sorts of flashing trying to get off the "firmware upgrade encountered an issue" screen (also Kies would not recognize that the phone was connected). Tried different recoveries and firmware without making any progress until I flashed the 4.4.2 (I317UCUCNE5) bootloader. The phone booted into Philz recovery after that. I then flashed the stock LJ2 firmware w/ LJ2 modem, sim unlocked the phone and then flashed Skynote Air 4.3 along with the 4.4.2 (NE5) modem. This is the setup that I am using on T-Mobile now with no problems except that the Knox counter is tripped. Hope this helps shed some light on the problem.
I discovered a problem with Skynote 4.3 with the 4.4.2 bootloader. If I try to charge it with the phone turned off, the phone will freeze at the empty battery symbol and requires a battery pull to get the phone to turn on. Everything else seems to work okay.
Click to expand...
Click to collapse
My sister sell her note 2 to me because she's gonna upgrade to samsung galaxy S5. It was an att and I'm using T-mobile.
I did check the baseband ver and It was i317UCUCNE5 (4.4.2 OTA). the question is it is safe to flash base band ver i317UCALJ2 using ODIN?
Can you do the step by step process and also links of the files and software did you use please? thanks
emeianoite said:
Isn't that what a sim unlock is? Correct me if I have it wrong.
Click to expand...
Click to collapse
It's a network unlock, so you are free to use any GSM carrier. You can lock your sim card -- then a pin is required for your phone to connect to your carrier. It's the old skool method to stop unauthorized use, from the days before a lock screen pin.
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
trunks10k said:
I bought a SGH-I317M today off someone. It was locked to Bell Canada. I did the dumb thing by letting Kies update the firmware. And as i've read I'm pretty screwed for downgrading it. I tried unlocking it but the hidden menu didn't give me the 4th option in the network lock path. So i tried bunch of things which at one point required me installing Kies for drivers and thats when I i let it slip and update. So now I'm still searching for a method to unlock my phone. I've gotten philstouch recovery on and Skynote working. I just tried flashing the rogers_j2 modem.. hoping this will work.. you think I should just pay one of those sites or a retailer for the sim unlock ccode?
Click to expand...
Click to collapse
Please let me know if it works. mine is galaxy note 2 4.4.2 NE5 baseband and I've done some research and they said that if you upload your firmware thru OTA there is a possibility that it will soft brick you phone due to unknown security reason.
I'm just waiting for conformation from some one that it's safe to flash J2 modem on a NE5 OTA
in the US, if your phone is more than 6 months old and your contract is in good standing you can ask for the unlock code. I don't know if Canada is similar.
I was going to post the same question about unlocking I317 4.4.2, and found this post which is similar to what I'm looking for so just want to add to pump the question.
It's been a while but I have done unlocking for other At&t models (S3, S4) and learned that later versions don't with the option in hidden menu to unlock, and the work around is to downgrade. However with devices that have OTA updates, it's not possible to downgrade the bootloader.
Is this the same for Note 2 I317? If so, any other method available to unlock this device to use it on other GSM networks? (I just bought one and it's on Kitkat 4.4.2 UCUCNE5, and looking for unlock...)
It's only the modem that needs to be flashed. So whatever bootloader you're on doesn't matter.
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
dmrfresh said:
I wanted to unlock my phone today. ATT website wouldn't let me do it until my contract was fufilled, so I did some web searching.
Started with 4.4.2 and NE5 baseband. Loaded original baseband via recovery, and used the debug menu to unlock the sim. After that, updated the baseband back to the latest. Tmobile sim seems to be working just fine.
Click to expand...
Click to collapse
What bootloader were u on?
Sent from the TermiNOTEr 2! ?
The problem was resolved after flashing stock, reunlock, then restore. I will report if problems comeback.
Hello,
My phone was unlocked (not sure how, bought it second hand years ago) and used it fine on 4.4 custom rom. Ive updated it onthursday to the revolution 6.0.1 (with 3.0.2 twrp, nano open gappsa) and used it fine without problems on thursday.
However, yesterday, it lost cell signal and would not reconnect. So i rebooted the phone and now it is asking me to put sim unlock pin. What is the best course of action to get unlocked 6.0.1? I couldn't find an unlock method for 6.0.1. Should i backup rom, go back to 4.4, unlock, then restore?
Thank you.
It's asking for the sim pin or network unlock pin?
audit13 said:
It's asking for the sim pin or network unlock pin?
Click to expand...
Click to collapse
SIM Network unlock pin. My modem/bootloader is I317MVLBMA3. Do you think i can safely load a 4.1.1 rom and unlock again?
If i install phone info+ and look under secret codes, it does list the code for unlocking, but if i click on it, it gives me a blank page titled "service mode" but doesn't do anything (none of the three methods of entering work under the app). Probably because it is not stock ROM?
I tried searching for stock I317MVLALJ2 ROM to downgrade easily, but it seems like the link is down. I guess ill have to use ODIN.
EDIT:
Can I use TWRP to flash http://stockroms.net/file/GalaxyNote2/SGH-I317M/I317MVLALJ2_I317MOYAALJ2_RWC.zip stock ROM? Or do I have to use ODIN? I am assuming I can as it is a zip rather than img, and as long as I flash recovery right after flashing rom, I shouldn't lose recovery either?
Thank you.
The easiest way would be to flash a stock 4.1.1 rom in Odin. I am fairly certain you can downgrade as I think I downgraded from 4.3 or 4.4.2 on a Koodo note 2 so I could use it on Rogers. If it's not possible to downgrade, Odin will stop.
audit13 said:
The easiest way would be to flash a stock 4.1.1 rom in Odin. I am fairly certain you can downgrade as I think I downgraded from 4.3 or 4.4.2 on a Koodo note 2 so I could use it on Rogers. If it's not possible to downgrade, Odin will stop.
Click to expand...
Click to collapse
Thank you for the reply. I am currently on 6.0.1, but since modem is 4.4.2 ish, i hope that's okay. I will try ODIN. The zip i mentioned above is not a TWRP flashable zip, so I guess I have to use ODIN. The thing that worries me, though, is the fact that I cannot get to the recovery mode from off. I press and hold the volume up-power- home combo, but it keeps on resetting without entering TWRP. The only way for me to enter recovery right now is using a custom rom restart menu. If I go to stock ROM, I won't be able to access the recovery .
EDIT: If I let go of the power button at a certain time while booting, it seems to go into recovery just fine.. The problem is, that timing is tricky.
For flashing a stock rom, you need download mode so don't worry about getting into recovery.
To enter stock recovery, power off and try holding power, volume up, and home. Once the phone boots, let go of power but keep holding home and volume up until you see the dead android, then let go of all buttons.
audit13 said:
For flashing a stock rom, you need download mode so don't worry about getting into recovery.
To enter stock recovery, power off and try holding power, volume up, and home. Once the phone boots, let go of power but keep holding home and volume up until you see the dead android, then let go of all buttons.
Click to expand...
Click to collapse
Thank you. Flashed stock using ODIN, rebooted, showed samsung logo with music (stock boot animation), then the phone is stuck on SAMSUNG logo changing colors. Stuck there for the last 10 minutes... Not sure where to go from here ..
Boot into recovery and do a factory wipe.
audit13 said:
Boot into recovery and do a factory wipe.
Click to expand...
Click to collapse
Success. Thank you very much. So I've done the factory reset and successfully rebooted the phone. Then applied the unlock method, which seemed to have worked. Does not ask for SIM unlock pin. However, it does not seem to actually lock cellular signal. It still says 'Emergency Calls Only'. I am on Mobilicity, which used to be AWS, but now I believe is under Rogers. I know mobilicity used to take a while to connect, but I doubt that is the same now. This may be due to the old modem, so I will try updating the modem back to the 4.4 one... wish me luck
EDIT:
Without the modem update, it just connected to mobilicity !
Now the issue is, whether this phone will re-lock again once I flash 6.0.1...
Thank you very much audit13 for your live help!!
I will post back in a week or so (hopefully I remember...) whether this unlock sticks.
The 317m does not natively support was frequencies. You'll have to software enable was support.
You mean it doesn't ask for network unlock pin?
audit13 said:
The 317m does not natively support was frequencies. You'll have to software enable was support.
You mean it doesn't ask for network unlock pin?
Click to expand...
Click to collapse
Yup. It unlocked for sure. But that is no different than what I had before updating to 6.0.1. I've used the phone without problems on Mobilicity for 2-3 years.
Mobilicity is no longer AWS, so it has no problems connecting to the network. It just takes a while, especially with the 4.1.1 modem...
Now I'm just restoring the TWRP backup that I have made on 6.0.1 to see if the unlock sticks.
The unlock stayed for my phone when I installed a custom rom.
audit13 said:
The unlock stayed for my phone when I installed a custom rom.
Click to expand...
Click to collapse
Yes, that was the case yesterday as well. It stuck for a day, but after the cell lost the signal once (zero bars, emergency calls only), the phone got re-locked.
Now that I have restored the 6.0.1 backup, the phone is back up and running with it unlocked. Now ill will see how long this lasts.
Thank you very much for your continued support
I am having this issue now.. but the strange thing is that I've flashed to the Resurrection 6.0 rom a while back and it was working fine. Until a while ago I was pokemon hunting and all of a sudden my network died and its been asking me for a sim network pin... I was getting the intermittent network disconnect when I was on the Pokemon go app too long but it would reconnect back to the network after a short time.. not sure if it has something to do with the game app. Well, now I've downloaded the latest Resurrection rom and flashed it again doing a factory wipe but still nothing. I'm going to try and flash the modem and see if that helps.
EDIT: forgot to mention I'm on Koodo network which is also Telus, I believe. But now it wants to automatically connect to the rogers network hence I'm assuming its asking for the PIN.
(edited for grammar)
This is really strange that this happens. I've unlocked a few note 2 phones and none of them have relocked.
Did you change the csc in the phone settings to Koodo?
audit13 said:
This is really strange that this happens. I've unlocked a few note 2 phones and none of them have relocked.
Did you change the csc in the phone settings to Koodo?
Click to expand...
Click to collapse
do you know why I cannot do the universal unlock method by entering the *#197328640# method? when I enter those digits nothing happens..
EDIT: Forgot to mention that the newest Resurrection rom did not work so I tried DNA 4.4 rom and still asking for unlock pin.. damn. need a new phone it seems..
I believe you need to be running a particular version of the stock Samsung dialler.
audit13 said:
I believe you need to be running a particular version of the stock Samsung dialler.
Click to expand...
Click to collapse
What's the csc you mentioned?
Csc is a carrier customization file. If you change the csc, which can be done using a stock rom, you can choose the carrier for whom the rom phone was intended. I choose Telus as a carrier because they have very little bloatware.
audit13 said:
Csc is a carrier customization file. If you change the csc, which can be done using a stock rom, you can choose the carrier for whom the rom phone was intended. I choose Telus as a carrier because they have very little bloatware.
Click to expand...
Click to collapse
I'm using this rom
http://forum.xda-developers.com/showthread.php?t=2541860
which is a modded stock rom I believe but I don't know how to edit the csc file.
Hello everybody! I have a problem. When I am in 2G network, network signal is good, but no one can call me. SMS is incoming and internet works. But no calls. Sometimes and me can't even be able to call. What is the problem? With 3G network no problem.
Device - T999N.
I live in Uzbekistan. Operator is Beeline Uzbekistan.
Is the phone running the latest bootloader and modem? Which ROM is installed?
Modem T999NUVUBOH1.
Now installed RR от d2att. But I've try CyanogenMod, LiteRom, OctOs. And STOCK that was, I do not remember.
And what do you mean with the bootloader?
The bootloader is what allows the phone to boot the ROM. It's similar to a computer BIOS.
This happens on the stock ROM too?
audit13 said:
The bootloader is what allows the phone to boot the ROM. It's similar to a computer BIOS.
Click to expand...
Click to collapse
I now about Bios. Bootloader is kernel in custom roms?
audit13 said:
This happens on the stock ROM too?
Click to expand...
Click to collapse
I don't remember. Bought and immediately flashed custom.
Bootloader is not the kernel. The Kernel is part of the operating system.
Well, now I'll try to change the bootloader. Can you give the actual link?
And it will not break unlock?
The simplest way to update everything on the phone would be to flash a stock ROM from sammobile.com. Flashing a stock ROM should not re-lock the phone to a carrier. I have used several Samsung phones in the past and, once the phone has been network unlocked, it has stayed unlocked.
Before flashing anything, confirm the phone's model # in download mode.
audit13 said:
The simplest way to update everything on the phone would be to flash a stock ROM from sammobile.com. Flashing a stock ROM should not re-lock the phone to a carrier. I have used several Samsung phones in the past and, once the phone has been network unlocked, it has stayed unlocked.
Before flashing anything, confirm the phone's model # in download mode.
Click to expand...
Click to collapse
I flashed T999NUVUBOH1_T999NTMBBOH1_TMB from Sammobile. But Phone is bootlooped. It shows only logo MetroPCS Wireless for all and notification LED lights.
Phone is booted. But in stock also I can't call in the EDGE network.
Does the carrier have 2g for voice calls? I know that 2g is being eliminated in the USA.
audit13 said:
Does the carrier have 2g for voice calls? I know that 2g is being eliminated in the USA.
Click to expand...
Click to collapse
Oh sure. Half of the our country works in 2G.
Hmm, I'm not sure why 2g calls don't work as the s3 definitely supports 2g.