[Q&A] [MOD][NOV 21] MultiROM v30 - Nexus 7 (2013) Q&A

Q&A for [MOD][NOV 21] MultiROM v30
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD][NOV 21] MultiROM v30. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Kernel: does not have kexec-hardboot patch
Guys, help me, please, solve the problem. I updated to Android 5.0.1 and now the program writes to me: "Kernel: does not have kexec-hardboot patch". There is a patch for 5.0.1?

FalseTrue said:
Guys, help me, please, solve the problem. I updated to Android 5.0.1 and now the program writes to me: "Kernel: does not have kexec-hardboot patch". There is a patch for 5.0.1?
Click to expand...
Click to collapse
You need a kernel with kaxec hardboot patch. Try elemental x. Or see if there is a stock one with the patch.

madbat99 said:
You need a kernel with kaxec hardboot patch. Try elemental x. Or see if there is a stock one with the patch.
Click to expand...
Click to collapse
Thanks for the reply. And how fast is usually a new version of the patch will released?

FalseTrue said:
Thanks for the reply. And how fast is usually a new version of the patch will released?
Click to expand...
Click to collapse
As soon as a new stock kernel comes out, someone usually immediately makes one with kaxec

Thanks you
madbat99 said:
As soon as a new stock kernel comes out, someone usually immediately makes one with kaxec
Click to expand...
Click to collapse
Thank you very much for your answer. Thought so.

Error MultiROM mr_update A0001
Hi, I have a big problem...
I have a 1+1 with cm11s 44S in primary ROM. I use MultiROM for testing new ROM's... I have AK35 cm12 kernel
I have installed 5 or 6 custom ROM cm12, without problem..
since lastest Rom's of multiple Dev, I can't install new version of their rom...
Exemple: I can install LiquidSmooth v4.0.0 of 21/11/2014... but i can't install the version of 27/11/2014 and newer..
Other custom ROM have same problem..
Install doesn't work because this problem: E:Error executing updater binary in zip '/tmp/mr_update.zip'
It comes only with newer versions..
Only AICP and Euphoria ROM are good and want to install...in their newer version
Installing ROM LS-LP-v4.0-2014-12-06-liqu...
Creating folders and images for type 1
Flashing ZIP file /sdcard/Download/LS-LP-v4.0-2014-12-06-liquid_bacon.zip
ROM: LS-LP-v4.0-2014-12-06-liqu
Preparing ZIP file...
rm: can't remove '/tmp/mr_update.zip': No such file or directory
Copying ZIP to /tmp...
updating: META-INF/com/google/android/updater-script
zip warning: Local Entry CRC does not match CD: META-INF/com/google/android/updater-script
(deflated 74%)
Changing mounts to ROM LS-LP-v4.0-2014-12-06-liqu...
I:Mount: Unable to find partition for path '/data'
I:Backup folder set to '/realdata/media/0/TWRP/BACKUPS/5e7b4ef6'
I:mount '/realdata/media/0' '/sdcard' process ended with RC=0
Irocessing '/data_t'
I:Created '/data_t' folder.
Irocessing '/system'
Irocessing '/cache'
I:Recreating /cache/recovery folder.
Partition Logs:
/modem | /dev/block/mmcblk0p1 | Size: 64MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p1
Display_Name: modem
Storage_Name: modem
Backup_Path: /modem
Backup_Name: modem
Backup_Display_Name: modem
Storage_Path: /modem
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl1 | /dev/block/mmcblk0p2 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p2
Display_Name: sbl1
Storage_Name: sbl1
Backup_Path: /sbl1
Backup_Name: sbl1
Backup_Display_Name: sbl1
Storage_Path: /sbl1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/rpm | /dev/block/mmcblk0p6 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p6
Display_Name: rpm
Storage_Name: rpm
Backup_Path: /rpm
Backup_Name: rpm
Backup_Display_Name: rpm
Storage_Path: /rpm
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/tz | /dev/block/mmcblk0p8 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: tz
Storage_Name: tz
Backup_Path: /tz
Backup_Name: tz
Backup_Display_Name: tz
Storage_Path: /tz
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/modem_st1 | /dev/block/mmcblk0p10 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p10
Display_Name: modem_st1
Storage_Name: modem_st1
Backup_Path: /modem_st1
Backup_Name: modem_st1
Backup_Display_Name: modem_st1
Storage_Path: /modem_st1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/modem_st2 | /dev/block/mmcblk0p11 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p11
Display_Name: modem_st2
Storage_Name: modem_st2
Backup_Path: /modem_st2
Backup_Name: modem_st2
Backup_Display_Name: modem_st2
Storage_Path: /modem_st2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/static_nv_bk | /dev/block/mmcblk0p13 | Size: 10MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p13
Display_Name: static_nv_bk
Storage_Name: static_nv_bk
Backup_Path: /static_nv_bk
Backup_Name: static_nv_bk
Backup_Display_Name: static_nv_bk
Storage_Path: /static_nv_bk
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/oppodycnvbk | /dev/block/mmcblk0p12 | Size: 10MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p12
Display_Name: oppodycnvbk
Storage_Name: oppodycnvbk
Backup_Path: /oppodycnvbk
Backup_Name: oppodycnvbk
Backup_Display_Name: oppodycnvbk
Storage_Path: /oppodycnvbk
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/aboot | /dev/block/mmcblk0p5 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p5
Display_Name: aboot
Storage_Name: aboot
Backup_Path: /aboot
Backup_Name: aboot
Backup_Display_Name: aboot
Storage_Path: /aboot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p7 | Size: 16MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/realdata | /dev/block/mmcblk0p28 | Size: 56189MB Used: 1710MB Free: 39907MB Backup Size: 1710MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /realdata/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p28
Display_Name: Realdata
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /realdata/media/0
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/misc | /dev/block/mmcblk0p21 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p21
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/recovery | /dev/block/mmcblk0p17 | Size: 16MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p17
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/logo | /dev/block/mmcblk0p22 | Size: 16MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p22
Display_Name: logo
Storage_Name: logo
Backup_Path: /logo
Backup_Name: logo
Backup_Display_Name: logo
Storage_Path: /logo
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/reserve4 | /dev/block/mmcblk0p27 | Size: 64MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p27
Display_Name: reserve4
Storage_Name: reserve4
Backup_Path: /reserve4
Backup_Name: reserve4
Backup_Display_Name: reserve4
Storage_Path: /reserve4
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/data | /realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/data | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Use_Rm_Rf Can_Be_Backed_Up IsPresent Ignore_Blkid
Primary_Block_Device: /realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/data
Display_Name: Data
Storage_Name: data_t
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data_t
Current_File_System: ext4
Fstab_File_System: ext4
Bind_Of: /realdata
Backup_Method: files
/system | /realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/system | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Use_Rm_Rf Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Ignore_Blkid
Primary_Block_Device: /realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/system
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Bind_Of: /realdata
Backup_Method: files
/cache | /realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/cache | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Use_Rm_Rf Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Ignore_Blkid
Primary_Block_Device: /realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/cache
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Bind_Of: /realdata
Backup_Method: files
I:Running cmd "dd if="/dev/block/mmcblk0p7" of="/realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/boot.img""
32768+0 records in
32768+0 records out
16777216 bytes (16.0MB) copied, 0.786623 seconds, 20.3MB/s
Current boot sector was used as base for fake boot.img!
I:Running cmd "echo '/dev/block/mmcblk0p7' > /tmp/mrom_fakebootpart"
I:Running cmd "mv "/dev/block/mmcblk0p7" "/dev/block/mmcblk0p7-orig""
I:Running cmd "ln -s "/realdata/media/0/multirom/roms/LS-LP-v4.0-2014-12-06-liqu/boot.img" "/dev/block/mmcblk0p7""
ZIP uses block updates
Creating system.img...
I:Creating image with cmd: make_ext4fs -l 1333M -a "/system" -S /file_contexts "/realdata/media/0/multirom/system.img"
Creating filesystem with parameters:
Size: 1397751808
Block size: 4096
Blocks per group: 32768
Inodes per group: 7760
Inode size: 256
Journal blocks: 5332
Label:
Blocks: 341248
Block groups: 11
Reserved block group size: 87
Created filesystem with 11/85360 inodes and 11226/341248 blocks
I:Running cmd "losetup "/dev/block/loop0" "/realdata/media/0/multirom/system.img""
I:Running cmd "mv "/dev/block/mmcblk0p14" "/dev/block/mmcblk0p14-orig" && ln -s "/dev/block/loop0" "/dev/block/mmcblk0p14""
I:Running cmd "rm "/realdata/media/0/multirom/system.img""
I:Running cmd "echo "/dev/block/mmcblk0p14" > /tmp/mrom_fakesyspart"
Installing '/tmp/mr_update.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
line 2 col 6: syntax error, unexpected ENDIF, expecting $end
line 12 col 5: syntax error, unexpected ELSE, expecting $end
line 17 col 6: syntax error, unexpected ENDIF, expecting $end
3 parse errors
I:Legacy property environment disabled.
E:Error executing updater binary in zip '/tmp/mr_update.zip'
rm: can't remove 'META-INF/com/google/android': No such file or directory
Failed to install ZIP!
I:Running cmd "busybox umount -d /tmpsystem"
umount: can't umount /tmpsystem: No such file or directory
I:Running cmd "rm "/dev/block/mmcblk0p14""
I:Running cmd "mv "/dev/block/mmcblk0p14"-orig "/dev/block/mmcblk0p14""
I:Running cmd "rm "/dev/block/mmcblk0p7""
I:Running cmd "mv "/dev/block/mmcblk0p7"-orig "/dev/block/mmcblk0p7""
Restoring mounts...
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
umount: can't umount /system: Invalid argument
umount: can't umount /data: Invalid argument
umount: can't umount /cache: Invalid argument
umount: can't umount /sdcard: Invalid argument
umount: can't umount /realdata: Device or resource busy
losetup: /dev/block/loop1: No such device or address
losetup: /dev/block/loop2: No such device or address
losetup: /dev/block/loop3: No such device or address
losetup: /dev/block/loop4: No such device or address
losetup: /dev/block/loop5: No such device or address
losetup: /dev/block/loop6: No such device or address
losetup: /dev/block/loop7: No such device or address
Iartition /realdata is mounted during TWPartitionManager:op_Context()
Updating partition details...
I:mount '/data/media/0' '/sdcard' process ended with RC=0
Iata backup size is 1710MB, free: 39893MB.
...done
I:Unable to find storage partition '/realdata/media/0'.
I:mount '/data/media/0' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/5e7b4ef6'
Erasing incomplete ROM...
I:Set page: 'action_complete'
I:Set page: 'clear_vars'
I:Set page: 'multirom_add'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Click to expand...
Click to collapse
Sorry for my very very bad English.
Pleaaase! HELP me!
Thanks for regarding!

Wifi stops working after install
I've tried 3 separate times to install multirom and each time it installs fine but once installed my wifi is automatically turned off. I go into settings and try to turn it back on, and it says it's turning it on but then it sits indefinitely without ever actually turning it back on. I'm using a Nexus 7 (2013) with 5.0.1 Any ideas?

Losing wifi
Everytime I install Multirom, I seem to lose wifi -- the indicator won't light up when I press it, and though I can slide the button to the right on the Wi-Fi Settings page,
This Nexus 7 arrived yesterday & I wasted little time trying to get Multirom on it, basically with the intent of booting Ubuntu. I'm not exactly a hacker, but I have managed to root my Nexus 4, so I'm not completely useless.
Twice now I've done this with the same result:
1. Successfully gain root with the device using Chainfire's "one-click script."
2. Use the MultiROM Manager app to do its stuff, which it successfully completes.
3. Reboot.
The reboot process completes successfully as far as I can tell, and everything seems to work, except wifi.

So here's my problem: I really want to install Multirom, but I can't unless it's rooted. As far as I can tell, the easiest way to root the device is flashing Chainfire's rom, but apparently doing so kills wifi. I guess I could proceed to install Multirom at that point and then install a different rooted rom but that's a little complicated, especially since I'm afraid of bricking in my ignorance.
Is there a simpler way for me to proceed? Or am I missing something.
Please note I am on Ubuntu only so cannot use Wug's windows thing.

Okay, so I used a buddy's Windows machine to root the N7 with Wugfresh's toolkit. Got home and used the Multirom Manager app to install, and watched it reboot and then add the kexec patch. I rebooted, and now have lost wifi, so I don't know what to do next. Did I miss a step somewhere? Should I copy a third-party rom and flash that?

So, let me try again: is this a known issue? It's the second time I've lost wifi after installing Multirom using the app. after rooting -- first with Chainfire's rom and then using Wugfresh's toolkit. I'm pretty sure I followed directions to the letter. Is there a fix I can try?

More information just in case: this is a Nexus 7 (2013), brand new
Android version 5.0.1
Kernel version
3.4..0-g20f5923
[email protected] #66
Wed Sep 25 22:02:11 CEST 2013
Build number LRX22C
Glad to provide more information if needed.

Hello All,
I am currently running multirom v30 on my 2013 Nexus 7.
Edit: I have an extfat formatted usb stick. I installed a cm12 nightly to the usb drive via multirom. When it boots the rom now hangs on the Google screen while the light on the usb drive flashes slowly. I am currently at a loss at what to do. Any and all help is appreciated!!!

ray field said:
More information just in case: this is a Nexus 7 (2013), brand new
Android version 5.0.1
Kernel version
3.4..0-g20f5923
[email protected] #66
Wed Sep 25 22:02:11 CEST 2013
Build number LRX22C
Glad to provide more information if needed.
Click to expand...
Click to collapse
Don't think it related to multirom. I have all the same as you and WiFi is fine. Have you tried forgetting that network and retyping the password? Make sure frequency is set to auto. WiFi is fine on multirom on nexus 7(2013) 5.0.1.

Calendar and book reader
I have been playing with multirom since I got my nexus 7 (2013). I installed it first thing. I installed several roms and I was wondering if there were any way to synch my calendar and my book reader across the roms. Calendar especially.

I'm running Paranoid 4.6 Beta 6 with patched Franco Kernel r17 as primary and want to flash latest CM 12 nightly as secondary. I followed the steps to add the custom ROM but when I flash the zip file it says something like "error executing binary file /tmp/mr_update.zip" What I'm trying to do is not possible? Should I try another CM 12 nightly? Is there any other good custom rom based on lollipop and compatible with multiROM that you could recommend?
BTW, my device is a Nexus 7 2013 (flo)

problems with my 3 rom in nexus 7 2013
Hello and thanks for any help. + sorry for my bad english.
I have nexus 7 2013 with sim and i just install multirom and flashed the second rom without any problems. The first rom is the original 4.4.4 and the second is ubuntu touch. I download kali linux for nexus 7 2013 and flash it from TWRP as new rom. It has installed successfuly but i gut an error trying to boot to that rom. Im attaching picture with the screen when it got the error.
Can some one help plz?
Cheers

The Latest Multirom v30 Seems Unstable
Hi all, I 'm a Multirom user. since I found I can`t boot into AICP rom after it`s ota update, I backed up and erased everything. Then I downloaded google`s factory image and runned flash-all.bat file smoothly. After that, I did: boot system (seccess) and reboot into bootloader --> flash twrp_multirom_20150115.img --> install kernel_*_501.zip&&multirom_v30.zip --> add previous rom backups --> reboot system ,till now,everything seems OK . I can boot into any of the secondary roms.
A.But Problems happened after I renamed the secondary roms in the recovery, like "bckp--DATE--AICP“ ->"AICP", "bckp--DATE--CM_Games" -> "CM_Games". It tends to boot into the PRIMARY ROM when I tap the First SECONDARY ROM ;when I tap other secondary roms , it stuck at Google Logo. If I give the Secondary ROMs long-names back , it can boot into the 1st secondary rom , stuck at Google Logo if I tap other Secondary rom I backed up before.
B.Besides, after I installed firefox_OS_1.3.zip,CM_20150125.zip,AICP_20150125.zip individually as secondary rom ,I failed booting into them. 1.Firefox_OS:stuck at Google Logo,2.CM&&AICP:stopped at boot animation.(I am bored to and don`t try the "swap" option or rename)
Anyone who knows any temp solution(s) about those bugs?Should I upload the log file?
It seems that the short-name bug exits for a long time. Anyway , thanks for your multirom @Tasssadar !
Sorry for my bad English.

running X applications in Xmir in Ubuntu Touch
Finally I figured out a way to run X applications in Ubuntu Touch using clues from here:
www dot youtube dot com/watch?v=XfMLzlki9XE
www dot phoronix dot com/scan.php?page=news_item&px=Ubuntu-Unity-8-Pre-MWC-Demo
1. Install Ubuntu Touch Vivid Proposed via MultiROM
2. Increase the disk image size for Ubuntu
3. boot Ubuntu
4. enable developer mode
5. connect via adb
6. mount image writable
Code:
mount / -o rw,remount
touch /userdata/.writable_image # to keep rw after reboots
7. install Xmir
Code:
wget 'https://launchpad.net/~mlankhorst/+archive/ubuntu/ppa//+files/xserver-xorg-xmir_1.17.1-0ubuntu1%7Eppa1%2Bsa7_armhf.deb'
wget 'https://launchpad.net/~mlankhorst/+archive/ubuntu/ppa//+files/xserver-xorg-core_1.17.1-0ubuntu1~ppa1+sa7_armhf.deb'
wget 'https://launchpad.net/~mlankhorst/+archive/ubuntu/ppa//+files/xserver-common_1.17.1-0ubuntu1%7Eppa1%2Bsa7_all.deb'
dpkg --install *.deb
8. place a script like this in your home
Code:
#!/bin/bash
DISPLAY=:1
Xmir $DISPLAY
sleep 1
xeyes
9. make it executable
Code:
[email protected]:~$ chmod +x test.sh
10. place a file like this in ~/.local/share/applications/test.desktop
Code:
[Desktop Entry]
Name=Test
Type=Application
Terminal=false
Icon=/usr/lib/arm-linux-gnueabihf/qt5/qml/Ubuntu/Components/Themes/Ambiance/artwork/[email protected]
X-Ubuntu-Touch=true
Exec=/home/phablet/test.sh
11. pull down on the "Apps" home screen in Ubuntu Touch, now you should see the Test icon appear
12. launch Test and see xeyes appear
It seems to work with all applications I tried so far (xeyes, xterm, icewm, libreoffice-writer). A keyboard plugged in via USB OTG works ok, touch works, external mouse kinda works. The mouse cursor doesnt show, so that makes for awkward usage, also xeyes only seems to register the position upon click, not upon moving around.

Related

[Q] can't access userdata partition

Hi all,
i am desperatly trying to fix a gnex refusing to erase/format/write userdata partition (tried odin and fastboot)
i finally managed to get a recovery to work (twrp), so this allows me to connect with adb.
i can now get the partitions:
Code:
ls -l /dev/block/platform/omap/omap_hsmmc.0/by-name/
lrwxrwxrwx 1 root root 20 Jan 1 20:49 boot -> /dev/block/mmcblk0p7
lrwxrwxrwx 1 root root 21 Jan 1 20:49 cache -> /dev/block/mmcblk0p11
lrwxrwxrwx 1 root root 20 Jan 1 20:49 dgs -> /dev/block/mmcblk0p6
lrwxrwxrwx 1 root root 20 Jan 1 20:49 efs -> /dev/block/mmcblk0p3
lrwxrwxrwx 1 root root 21 Jan 1 20:49 metadata -> /dev/block/mmcblk0p13
lrwxrwxrwx 1 root root 20 Jan 1 20:49 misc -> /dev/block/mmcblk0p5
lrwxrwxrwx 1 root root 20 Jan 1 20:49 param -> /dev/block/mmcblk0p4
lrwxrwxrwx 1 root root 20 Jan 1 20:49 radio -> /dev/block/mmcblk0p9
lrwxrwxrwx 1 root root 20 Jan 1 20:49 recovery -> /dev/block/mmcblk0p8
lrwxrwxrwx 1 root root 20 Jan 1 20:49 sbl -> /dev/block/mmcblk0p2
lrwxrwxrwx 1 root root 21 Jan 1 20:49 system -> /dev/block/mmcblk0p10
lrwxrwxrwx 1 root root 21 Jan 1 20:49 userdata -> /dev/block/mmcblk0p12
lrwxrwxrwx 1 root root 20 Jan 1 20:49 xloader -> /dev/block/mmcblk0p1
then tried to check for error on userdata
Code:
~ # e2fsck -c /dev/block/mmcblk0p12
e2fsck 1.41.12 (17-May-2010)
e2fsck: Attempt to read block from filesystem resulted in short read while trying to open /dev/block/mmcblk0p12
Could this be a zero-length partition?
this seems strange... but partition size seems not null:
Code:
~ # cat /proc/partitions
major minor #blocks name
31 0 1024 mtdblock0
179 0 15388672 mmcblk0
179 1 128 mmcblk0p1
179 2 3584 mmcblk0p2
179 3 20480 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 4096 mmcblk0p5
179 6 4096 mmcblk0p6
179 7 8192 mmcblk0p7
259 0 12224 mmcblk0p8
259 1 16384 mmcblk0p9
259 2 669696 mmcblk0p10
259 3 442368 mmcblk0p11
259 4 14198767 mmcblk0p12
259 5 64 mmcblk0p13
179 16 512 mmcblk0boot1
179 8 512 mmcblk0boot0
beside, there is really not much in the fstab, is this normal ?
Code:
~ # cat /etc/fstab
/dev/block/mmcblk0p10 /system ext4 rw
/dev/block/mmcblk0p11 /cache ext4 rw
/dev/block/mmcblk0p3 /efs ext4 rw
/usb-otg vfat rw
shouldn't it mount the userdata paritition too ?
anyway, if someone with a working gnex could check against the same commands, this would help me big time !
riferez and
auto-answering... the fstab must be the one from the recovery, not the one from system... don't know where to find that one though
and still doesn't explain the e2fsk error
julienvt said:
auto-answering... the fstab must be the one from the recovery, not the one from system... don't know where to find that one though
and still doesn't explain the e2fsk error
Click to expand...
Click to collapse
tried to fdisk the partitions to get info, no success... can't anybody try from adb ?
Code:
/sbin # fdisk -l /dev/block/mmcblk0p1
fdisk: can't open '/dev/block/mmcblk0p1': I/O error
/sbin # fdisk -l /dev/block/mmcblk0p9
fdisk: can't open '/dev/block/mmcblk0p9': I/O error
/sbin # fdisk -l /dev/block/mmcblk0p3
fdisk: can't open '/dev/block/mmcblk0p3': I/O error
julienvt said:
tried to fdisk the partitions to get info, no success... can't anybody try from adb ?
Code:
/sbin # fdisk -l /dev/block/mmcblk0p1
fdisk: can't open '/dev/block/mmcblk0p1': I/O error
/sbin # fdisk -l /dev/block/mmcblk0p9
fdisk: can't open '/dev/block/mmcblk0p9': I/O error
/sbin # fdisk -l /dev/block/mmcblk0p3
fdisk: can't open '/dev/block/mmcblk0p3': I/O error
Click to expand...
Click to collapse
Give me 10mins, I'll connect my device and give you those command outputs.
a maguro wrote this.
i got parted on the recovery, and tried access the disk that way
Code:
parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
print
Error: /dev/block/mmcblk0: unrecognised disk label
(parted) quit
this doesn't bode very well for the emmc.. although i don't understand why i can flash bootloader, recovery, system, etc, and not userdata. Is this parttion somehow physically separated ?
(i previously used omap without errors as well)
i tried on another android phone, got the same messages, so it's just a wrong method
julienvt said:
Hi all,
i am desperatly trying to fix a gnex refusing to erase/format/write userdata partition (tried odin and fastboot)
i finally managed to get a recovery to work (twrp), so this allows me to connect with adb.
i can now get the partitions:
Code:
ls -l /dev/block/platform/omap/omap_hsmmc.0/by-name/
lrwxrwxrwx 1 root root 20 Jan 1 20:49 boot -> /dev/block/mmcblk0p7
lrwxrwxrwx 1 root root 21 Jan 1 20:49 cache -> /dev/block/mmcblk0p11
lrwxrwxrwx 1 root root 20 Jan 1 20:49 dgs -> /dev/block/mmcblk0p6
lrwxrwxrwx 1 root root 20 Jan 1 20:49 efs -> /dev/block/mmcblk0p3
lrwxrwxrwx 1 root root 21 Jan 1 20:49 metadata -> /dev/block/mmcblk0p13
lrwxrwxrwx 1 root root 20 Jan 1 20:49 misc -> /dev/block/mmcblk0p5
lrwxrwxrwx 1 root root 20 Jan 1 20:49 param -> /dev/block/mmcblk0p4
lrwxrwxrwx 1 root root 20 Jan 1 20:49 radio -> /dev/block/mmcblk0p9
lrwxrwxrwx 1 root root 20 Jan 1 20:49 recovery -> /dev/block/mmcblk0p8
lrwxrwxrwx 1 root root 20 Jan 1 20:49 sbl -> /dev/block/mmcblk0p2
lrwxrwxrwx 1 root root 21 Jan 1 20:49 system -> /dev/block/mmcblk0p10
lrwxrwxrwx 1 root root 21 Jan 1 20:49 userdata -> /dev/block/mmcblk0p12
lrwxrwxrwx 1 root root 20 Jan 1 20:49 xloader -> /dev/block/mmcblk0p1
then tried to check for error on userdata
Code:
~ # e2fsck -c /dev/block/mmcblk0p12
e2fsck 1.41.12 (17-May-2010)
e2fsck: Attempt to read block from filesystem resulted in short read while trying to open /dev/block/mmcblk0p12
Could this be a zero-length partition?
this seems strange... but partition size seems not null:
Code:
~ # cat /proc/partitions
major minor #blocks name
31 0 1024 mtdblock0
179 0 15388672 mmcblk0
179 1 128 mmcblk0p1
179 2 3584 mmcblk0p2
179 3 20480 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 4096 mmcblk0p5
179 6 4096 mmcblk0p6
179 7 8192 mmcblk0p7
259 0 12224 mmcblk0p8
259 1 16384 mmcblk0p9
259 2 669696 mmcblk0p10
259 3 442368 mmcblk0p11
259 4 14198767 mmcblk0p12
259 5 64 mmcblk0p13
179 16 512 mmcblk0boot1
179 8 512 mmcblk0boot0
beside, there is really not much in the fstab, is this normal ?
Code:
~ # cat /etc/fstab
/dev/block/mmcblk0p10 /system ext4 rw
/dev/block/mmcblk0p11 /cache ext4 rw
/dev/block/mmcblk0p3 /efs ext4 rw
/usb-otg vfat rw
shouldn't it mount the userdata paritition too ?
anyway, if someone with a working gnex could check against the same commands, this would help me big time !
Click to expand...
Click to collapse
on TWRP:
Code:
~ # cat /proc/partitions
major minor #blocks name
31 0 1024 mtdblock0
179 0 15388672 mmcblk0
179 1 128 mmcblk0p1
179 2 3584 mmcblk0p2
179 3 20480 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 4096 mmcblk0p5
179 6 4096 mmcblk0p6
179 7 8192 mmcblk0p7
259 0 12224 mmcblk0p8
259 1 16384 mmcblk0p9
259 2 669696 mmcblk0p10
259 3 442368 mmcblk0p11
259 4 14198767 mmcblk0p12
259 5 64 mmcblk0p13
179 16 512 mmcblk0boot1
179 8 512 mmcblk0boot0
Code:
~ # cat /etc/fstab
/dev/block/mmcblk0p10 /system ext4 rw
/dev/block/mmcblk0p11 /cache ext4 rw
/dev/block/mmcblk0p12 /data ext4 rw
/dev/block/mmcblk0p3 /efs ext4 rw
/usb-otg vfat rw
Code:
~ # mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mmcblk0p12 on /data type ext4 (rw,relatime,barrier=1,data=ordered)
/dev/block/mmcblk0p12 on /sdcard type ext4 (rw,relatime,barrier=1,data=ordered)
/dev/block/mmcblk0p11 on /cache type ext4 (rw,relatime,barrier=1,data=ordered)
/dev/block/mmcblk0p10 on /system type ext4 (rw,relatime,barrier=1,data=ordered)
you can see /data aka userdata is mounted, and so is /system (which you can use 'mount' or TWRP > Mount > /system).
Try to unmount the partitions then run 'e2fsck'.
julienvt said:
tried to fdisk the partitions to get info, no success... can't anybody try from adb ?
Code:
/sbin # fdisk -l /dev/block/mmcblk0p1
fdisk: can't open '/dev/block/mmcblk0p1': I/O error
/sbin # fdisk -l /dev/block/mmcblk0p9
fdisk: can't open '/dev/block/mmcblk0p9': I/O error
/sbin # fdisk -l /dev/block/mmcblk0p3
fdisk: can't open '/dev/block/mmcblk0p3': I/O error
Click to expand...
Click to collapse
these are the radio, efs and x-loader.. why are you trying to mess with them?
bk201doesntexist said:
Code:
~ # mount
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mmcblk0p12 on /data type ext4 (rw,relatime,barrier=1,data=ordered)
/dev/block/mmcblk0p12 on /sdcard type ext4 (rw,relatime,barrier=1,data=ordered)
/dev/block/mmcblk0p11 on /cache type ext4 (rw,relatime,barrier=1,data=ordered)
/dev/block/mmcblk0p10 on /system type ext4 (rw,relatime,barrier=1,data=ordered)
you can see /data aka userdata is mounted, and so is /system (which you can use 'mount' or TWRP > Mount > /system).
Try to unmount the partitions then run 'e2fsck'.
Click to expand...
Click to collapse
in fact for me mount only show the first 5 entries, not /data and followings.
pls, in twrp log, i get:
Code:
E: unable to ount '/system'
E: unable to ount '/efs'
julienvt said:
in fact for me mount only show the first 5 entries, not /data and followings.
pls, in twrp log, i get:
Code:
E: unable to ount '/system'
E: unable to ount '/efs'
Click to expand...
Click to collapse
mate, i think your emmc fried or has bad blocks or something. Or your partition table is all screwed up. The fact parted can't read it (the device should be using GPT, i believe) also is not a good sign, right?
bk201doesntexist said:
mate, i think your emmc fried or has bad blocks or something.
Click to expand...
Click to collapse
seems like it... i'll try to see if i can try to format.
other than that, it requires to swap the motherboard, right ?
anyway, thanks for your help
i think i'll look into this:
http://forum.xda-developers.com/showthread.php?t=1644364
julienvt said:
i think i'll look into this:
http://forum.xda-developers.com/showthread.php?t=1644364
Click to expand...
Click to collapse
Might be related.
a manta wrote this.
i just ran the eMMC scanner from this thread:
http://forum.xda-developers.com/showthread.php?t=1823918
and all partitions seem fine !
Code:
~ # chmod 0755 /sbin/emmc-scan
~ # emmc-scan
partition /dev/block/mmcblk0p1
/dev/block/mmcblk0p1
scanned 0 MiB = 0 MB completed --> OK
partition /dev/block/mmcblk0p2
/dev/block/mmcblk0p2
scanned 3 MiB = 4 MB completed --> OK
partition /dev/block/mmcblk0p3
/dev/block/mmcblk0p3
scanned 20 MiB = 21 MB completed --> OK
partition /dev/block/mmcblk0p4
/dev/block/mmcblk0p4
scanned 8 MiB = 9 MB completed --> OK
partition /dev/block/mmcblk0p5
/dev/block/mmcblk0p5
scanned 4 MiB = 5 MB completed --> OK
partition /dev/block/mmcblk0p6
/dev/block/mmcblk0p6
scanned 4 MiB = 5 MB completed --> OK
partition /dev/block/mmcblk0p7
/dev/block/mmcblk0p7
scanned 8 MiB = 9 MB completed --> OK
partition /dev/block/mmcblk0p8
/dev/block/mmcblk0p8
scanned 11 MiB = 12 MB completed --> OK
partition /dev/block/mmcblk0p9
/dev/block/mmcblk0p9
scanned 16 MiB = 17 MB completed --> OK
partition /dev/block/mmcblk0p10
/dev/block/mmcblk0p10
scanned 654 MiB = 686 MB completed --> OK
partition /dev/block/mmcblk0p11
/dev/block/mmcblk0p11
scanned 432 MiB = 453 MB completed --> OK
partition /dev/block/mmcblk0p12
/dev/block/mmcblk0p12
scanned 13865 MiB = 14539 MB completed --> OK
partition /dev/block/mmcblk0p13
/dev/block/mmcblk0p13
scanned 0 MiB = 0 MB completed --> OK
it's... interesting ! But i don't really know where to go from there
another thing to note, is that twrp is asking me for password when starting... does this mean that the data is encryted ? could this explain why i can't mount/format the partition ?
here is the twrp recovery log
Code:
~ # cat /tmp/recovery.log
Starting TWRP 2.5.0.0 on Sun Jan 2 18:47:30 2000
BOARD_HAS_NO_REAL_SDCARD := true
I:Internal path defined: '/data/media'
I:External path defined: '/usb-otg'
I:Mount: Unable to find partition for path '/data'
SP1_NAME := efs
RECOVERY_SDCARD_ON_DATA := true
TW_NO_USB_STORAGE := true
TW_INCLUDE_CRYPTO := true
Starting the UI...Pixel format: 720x1280 @ 32bpp
Pixel format: BGR_565
framebuffer: fd 3 (720 x 1280)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/system'
I:Processing '/cache'
I:Recreating /cache/recovery folder.
I:Processing '/data'
I:Can't probe device /dev/block/mmcblk0p12
I:Unable to mount '/data'
I:Actual block device: '/dev/block/mmcblk0p12', current file system: 'ext4'
I:Can't probe device /dev/block/mmcblk0p12
I:Unable to mount '/data'
I:Actual block device: '/dev/block/mmcblk0p12', current file system: 'ext4'
I:Backup folder set to '/data/media/TWRP/BACKUPS/0A3BDBBB0B01F015'
I:Settings storage is '/data/media'
I:Processing '/misc'
I:Processing '/boot'
I:Processing '/recovery'
I:Processing '/sbl'
I:Processing '/xloader'
I:Processing '/radio'
I:Processing '/efs'
I:Created '/efs' folder.
I:Processing '/usb-otg'
I:Created '/usb-otg' folder.
Updating partition details...
I:Can't probe device /dev/block/mmcblk0p10
E:Unable to mount '/system'
I:Actual block device: '/dev/block/mmcblk0p10', current file system: 'ext4'
I:Can't probe device /dev/block/mmcblk0p3
E:Unable to mount '/efs'
I:Actual block device: '/dev/block/mmcblk0p3', current file system: 'ext4'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/system | /dev/block/mmcblk0p10 | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p10
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p11 | Size: 425MB Used: 7MB Free: 418MB Backup Size: 7MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p11
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p12 | Size: 13865MB
Flags: Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Is_Encrypted Has_Data_Media Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p12
Display_Name: data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: emmc
Fstab_File_System: ext4
Backup_Method: dd
/misc | /dev/block/mmcblk0p5 | Size: 4MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p5
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p7 | Size: 8MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/recovery | /dev/block/mmcblk0p8 | Size: 11MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl | /dev/block/mmcblk0p2 | Size: 3MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p2
Display_Name: sbl
Storage_Name: sbl
Backup_Path: /sbl
Backup_Name: sbl
Backup_Display_Name: sbl
Storage_Path: /sbl
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/xloader | /dev/block/mmcblk0p1 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p1
Display_Name: xloader
Storage_Name: xloader
Backup_Path: /xloader
Backup_Name: xloader
Backup_Display_Name: xloader
Storage_Path: /xloader
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/radio | /dev/block/mmcblk0p9 | Size: 16MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p9
Display_Name: radio
Storage_Name: radio
Backup_Path: /radio
Backup_Name: radio
Backup_Display_Name: radio
Storage_Path: /radio
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/efs | /dev/block/mmcblk0p3 | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p3
Display_Name: EFS
Storage_Name: EFS
Backup_Path: /efs
Backup_Name: efs
Backup_Display_Name: EFS
Storage_Path: /efs
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/0A3BDBBB0B01F015'
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Loading page fixsu
I:Switching packages (TWRP)
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands: ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=IMM76L
ro.build.display.id=cm_maguro-eng 4.0.4 IMM76L eng.dees_troy.20130408.213053 test-keys
ro.build.version.incremental=eng.dees_troy.20130408.213053
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Mon Apr 8 21:31:04 UTC 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=dees_troy
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.product.model=Galaxy Nexus
ro.product.brand=Google
ro.product.name=yakju
ro.product.device=maguro
ro.product.board=tuna
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
ro.build.product=maguro
ro.build.description=yakju-user 4.0.4 IMM76I 330937 release-keys
ro.build.fingerprint=google/yakju/maguro:4.0.4/IMM76I/330937:user/release-keys
ro.build.characteristics=nosdcard
ro.cm.device=maguro
rild.libpath=/vendor/lib/libsec-ril.so
rild.libargs=-d /dev/ttys0
telephony.lteOnCdmaDevice=0
ro.telephony.call_ring.multiple=0
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=9.0.0-RC0-maguro-UNOFFICIAL
ro.modversion=9.0.0-RC0-maguro-UNOFFICIAL
ro.config.ringtone=CyanTone.ogg
ro.config.notification_sound=CyanMessage.ogg
ro.config.alarm_alert=CyanAlarm.ogg
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=0A3BDBBB0B01F015
ro.bootmode=unknown
ro.baseband=I9250XXLA2
ro.carrier=unknown
ro.bootloader=PRIMELA03
ro.hardware=tuna
ro.revision=9
ro.emmc=0
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
E:TWFunc::Copy_Log -- Can't open destination log file: '/cache/recovery/log'
I:Copying file /cache/recovery/log to /cache/recovery/last_log
Failed closing /dev/block/mmcblk0p5
(I/O error)
E:Unable to set emmc bootloader message.
I:Is encrypted, do decrypt page first
I:Switching packages (TWRP)
I:Set page: 'decrypt'
I:Cannot find file /nobrightness
more data, parts of result of dmesg when recovery is starting
Code:
<6>[ 3.077697] mmc0: new high speed MMC card at address 0001
<6>[ 3.078124] mmcblk0: mmc0:0001 VYL00M 14.6 GiB
<6>[ 3.078277] mmcblk0boot0: mmc0:0001 VYL00M partition 1 512 KiB
<6>[ 3.078491] mmcblk0boot1: mmc0:0001 VYL00M partition 2 512 KiB
<6>[ 3.084991] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
<6>[ 3.085418] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=1140000 Calib=974860
<6>[ 3.087158] mmcblk0boot1: unknown partition table
<6>[ 3.088012] mmcblk0boot0: unknown partition table
<6>[ 4.788635] mms_ts 3-0048: could not find firmware file 'mms144_ts_rev32.fw'
<6>[ 4.788940] mms_ts 3-0048: Melfas MMS-series touch controller initialized
<3>[ 4.804687] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
<3>[ 4.826416] HDCP: failed to load keys
<6>[ 4.939514] EXT4-fs (mmcblk0p11): recovery complete
<6>[ 4.939666] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 5.093933] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 5.098724] android_work: sent uevent USB_STATE=DISCONNECTED
<3>[ 7.358123] mmcblk0: error -110 transferring data, sector 5611464, nr 8, cmd response 0x900, card status 0xb00
<4>[ 7.358306] mmcblk0: retrying using single block read
<6>[ 7.377777] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 7.378784] android_usb gadget: high speed config #1: android
<6>[ 7.379333] android_work: sent uevent USB_STATE=CONFIGURED
<3>[ 9.773437] mmcblk0: error -110 transferring data, sector 5611464, nr 8, cmd response 0x900, card status 0x0
<3>[ 9.773803] end_request: I/O error, dev mmcblk0, sector 5611464
<3>[ 10.836090] mmcblk0: timed out sending r/w cmd command, card status 0x400b00
<3>[ 10.836151] mmcblk0: command error, retrying timeout
<3>[ 13.250854] end_request: I/O error, dev mmcblk0, sector 5611465
<3>[ 13.251190] Buffer I/O error on device mmcblk0p12, logical block 1615844
<3>[ 14.312896] mmcblk0: timed out sending r/w cmd command, card status 0x400b00
<3>[ 14.312957] mmcblk0: command error, retrying timeout
<3>[ 16.727355] musb_g_ep0_irq 709: SetupEnd came in a wrong ep0stage out/status
<3>[ 16.727691] mmcblk0: error -110 transferring data, sector 5611466, nr 6, cmd response 0x900, card status 0x0
<3>[ 16.728057] end_request: I/O error, dev mmcblk0, sector 5611466
<3>[ 21.208526] mmcblk0: timed out sending r/w cmd command, card status 0x400b00
<3>[ 21.208587] mmcblk0: command error, retrying timeout
...
julienvt said:
more data, parts of result of dmesg when recovery is starting
Code:
[ 3.077697] mmc0: new high speed MMC card at address 0001
[ 3.078124] mmcblk0: mmc0:0001 VYL00M 14.6 GiB
[ 3.078277] mmcblk0boot0: mmc0:0001 VYL00M partition 1 512 KiB
[ 3.078491] mmcblk0boot1: mmc0:0001 VYL00M partition 2 512 KiB
[ 3.084991] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
[ 3.085418] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=1140000 Calib=974860
[ 3.087158] mmcblk0boot1: unknown partition table
[ 3.088012] mmcblk0boot0: unknown partition table
[ 4.788635] mms_ts 3-0048: could not find firmware file 'mms144_ts_rev32.fw'
[ 4.788940] mms_ts 3-0048: Melfas MMS-series touch controller initialized
[ 4.804687] omap-rproc omap-rproc.1: rproc_loader_cont: failed to load ducati-m3.bin
[ 4.826416] HDCP: failed to load keys
[ 4.939514] EXT4-fs (mmcblk0p11): recovery complete
[ 4.939666] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)
[ 5.093933] android_work: sent uevent USB_STATE=CONNECTED
[ 5.098724] android_work: sent uevent USB_STATE=DISCONNECTED
[ 7.358123] mmcblk0: error -110 transferring data, sector 5611464, nr 8, cmd response 0x900, card status 0xb00
[ 7.358306] mmcblk0: retrying using single block read
[ 7.377777] android_work: sent uevent USB_STATE=CONNECTED
[ 7.378784] android_usb gadget: high speed config #1: android
[ 7.379333] android_work: sent uevent USB_STATE=CONFIGURED
[ 9.773437] mmcblk0: error -110 transferring data, sector 5611464, nr 8, cmd response 0x900, card status 0x0
[ 9.773803] end_request: I/O error, dev mmcblk0, sector 5611464
[ 10.836090] mmcblk0: timed out sending r/w cmd command, card status 0x400b00
[ 10.836151] mmcblk0: command error, retrying timeout
[ 13.250854] end_request: I/O error, dev mmcblk0, sector 5611465
[ 13.251190] Buffer I/O error on device mmcblk0p12, logical block 1615844
[ 14.312896] mmcblk0: timed out sending r/w cmd command, card status 0x400b00
[ 14.312957] mmcblk0: command error, retrying timeout
[ 16.727355] musb_g_ep0_irq 709: SetupEnd came in a wrong ep0stage out/status
[ 16.727691] mmcblk0: error -110 transferring data, sector 5611466, nr 6, cmd response 0x900, card status 0x0
[ 16.728057] end_request: I/O error, dev mmcblk0, sector 5611466
[ 21.208526] mmcblk0: timed out sending r/w cmd command, card status 0x400b00
[ 21.208587] mmcblk0: command error, retrying timeout
...
Click to expand...
Click to collapse
Either partition table is damaged.. Or emmc has fried/bad blocks on that partition. It can't r/w mmcblk0p12, which is the same issue from the beginning. I imagine that, somehow, you could repartition it - maybe through omapflash/sectors or through a custom PIT file or maybe even through parted, after creating a new label (which will erase the partitions). Where's sector 5611466?
Have you tried getting feedback from the twrp team on this, see if they ever encountered this?
a manta wrote this.
bk201doesntexist said:
Either partition table is damaged.. Or emmc has fried/bad blocks on that partition. It can't r/w mmcblk0p12, which is the same issue from the beginning. I imagine that, somehow, you could repartition it - maybe through omapflash/sectors or through a custom PIT file -
a manta wrote this.
Click to expand...
Click to collapse
yeah, i tried to use parted or mkfs, see if i could format, but to no avail...
Code:
~ # parted /dev/block/mmcblk0p12 mkfs ext2
Error: /dev/block/mmcblk0p12: unrecognised disk label
Code:
~ # parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
print
Error: /dev/block/mmcblk0: unrecognised disk label
(parted)
Code:
~ # mkfs.ext2 /dev/block/mmcblk0p12
mkfs.ext2: lseek: Value too large for defined data type
although fastboot format -u userdata works until it tries to 'write userdata', and still, the emmc brick test runs smoothly.
I am about to sell it for pieces on ebay, but this is bugging me not to find a proper solution
julienvt said:
yeah, i tried to use parted or mkfs, see if i could format, but to no avail...
Code:
~ # parted /dev/block/mmcblk0p12 mkfs ext2
Error: /dev/block/mmcblk0p12: unrecognised disk label
Code:
~ # parted /dev/block/mmcblk0
GNU Parted 1.8.8.1.179-aef3
Using /dev/block/mmcblk0
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
print
Error: /dev/block/mmcblk0: unrecognised disk label
(parted)
Code:
~ # mkfs.ext2 /dev/block/mmcblk0p12
mkfs.ext2: lseek: Value too large for defined data type
although fastboot format -u userdata works until it tries to 'write userdata', and still, the emmc brick test runs smoothly.
I am about to sell it for pieces on ebay, but this is bugging me not to find a proper solution
Click to expand...
Click to collapse
mkfs.ext4 isn't available? Gives the same result? Can you create a new label in Parted?
a manta wrote this.
bk201doesntexist said:
mkfs.ext4 isn't available? Gives the same result?
a manta wrote this.
Click to expand...
Click to collapse
no, only mk2fs. maybe because it's twrp ?

[Q] Boot loop into TWRP / TWRP does not flash image (solved)

I rooted a LG V500 and installed Malladus 1.2.5. Did work fine. Then I made the mistake to flash the dyn.Kernel r2. The device did not start anymore.
After going around with the tricky hardware keys I can get back to TWRP recovery and flash again an image ZIP (tested it with the already working Maladus Zip as also with CM11 nightly). Flashing did not show any errors but after rebooting to system it does not start the image instead it goes back to recovery or hangs at the LG screen (did also wait over an hour there). ADB does also not connect anymore also the drivers did work fine before.
Does anyone have a clue what I can do or what I have missed?
Meanwhile I upgraded TWRP to the newest version and changed recovery also to Philz CWM "Secure Booting Error! Device UnLock" is also shown. But Boot loop does still occur also after triggering all sorts of wipe and reflashing again.
ADB, Fastboot or sideload is still not available. Windows device driver does only show "LGE AndroidNET Serial Port".
The mentioned recovery methods do fail since the GPAD does not connect regardless if already in download mode or not.
Anyone some hints what I can try next?
Have you tried flashing cm11 or mahdi, just to check it's not a rom thing?
Both the newest CM11 and MAHDI ROMs show up with the boot loop. Its unclear for me why the recovery mode is still forced also after flashing a ROM. Did also try CMWs "Clean to Install a new ROM" which should wipe everything but no luck.
Weird, there shouldn't be any problem...
As far as I can tell - but I might be wrong - your only way out would be to go back to stock. I haven't tried it myself, cause my installs always got right, but this thread might do the job :
http://forum.xda-developers.com/showthread.php?t=2543350
Tried already to recover. With LGMobile Support tool no connection can be established no matter if in download mode or in recovery.
With Software Update or Flash Tool for KDZ also no luck since KDZ is there is an error after successful unpacking:
[R&D Test Tools Log File]
11:16:48 : Launching SW update
11:16:48 : Unpacking KDZ
11:19:46 : KDZ file extraced
11:19:46 : Extract file error
11:19:48 : ===FINISHED===
I can suggest two things,
One is a complete clutching at straws idea and the other is a bit scary if it doesn't work.
First is to extract the boot.img and try to flash just that and see what happens. I'm not sure if you would have to lokify it, I'm just brainstorming.
The other is to download quick adb and fastboot (from xda) several roms and twrp 2.3.0 first to your pc and then completely wipe your tablet. Then reinstall your drivers on your pc.
Then install twrp 2.3.0 on your tablet through adb. Then flash a rom.
Then hopefully boot up and then flash twrp 2.3.2 zip
I'm not shouting but I want to emphasise this
If you wipe the tablet and adb is still not working YOU MAY END UP WITH A BRICK.
I'm not confident, it would be great if someone with more experience could chip in.
Sent from my LG-V500 using XDA Premium HD app
Already gone through all of this.
Recovery is not the problem, I can flash and use TWRP 2.6.3.1/2.6.3.2 or Philz CWM. LOKI should also be working since the "Secure Booting Error" is shown.
ADB is NOT possible. I can not connect to ADB since in recovery both TWRP and CWM do not respond on ADB and the download mode does not support ADB in general. Drivers should be fine since the GPAD could be rooted via ADB before I flashed the dyn. Kernel.
Since ADB does not work that might be also the problem I can´t start the recovery.
To flash the original kernel or recovery I would need Flashify since those are only available as image files (.IMG) but I can´t do this from recovery.
Boot log from TWRP after it looped again into recovery and not into system:
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.6.3.2 on Sun Feb 22 05:53:00 1970
BOARD_HAS_NO_REAL_SDCARD := true
I:Single storage only -- data/media.
I:Device has /data/media defined.
I:Mount: Unable to find partition for path '/data'
TW_NO_REBOOT_BOOTLOADER := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/platform/usb_mass_storage/lun0/file' does not exist, USB storage mode disabled
Starting the UI...Pixel format: 1200x1920 @ 32bpp
Pixel format: RGBX_8888
framebuffer: fd 4 (1200 x 1920)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/modem'
I:Processing '/sbl1'
I:Processing '/sbl2'
I:Processing '/sbl3'
I:Processing '/rpm'
I:Processing '/tz'
I:Processing '/modem_st1'
I:Processing '/modem_st2'
I:Processing '/aboot'
I:Processing '/boot'
I:Processing '/system'
I:Processing '/data'
I:Created '/sdcard' folder.
I:mount '/data/media' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/TWRP/BACKUPS/08faffb79c96eb46'
I:Settings storage is '/data/media'
I:Processing '/cache'
I:Processing '/recovery'
I:Processing '/external_sd'
I:Created '/external_sd' folder.
Updating partition details...
I:Data backup size is 0MB, size: 11304MB, used: 0MB, free: 11175MB, in data/media: 0MB.
I:Unmounting main partitions...
Partition Logs:
/modem | /dev/block/mmcblk0p1 | Size: 64MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p1
Display_Name: modem
Storage_Name: modem
Backup_Path: /modem
Backup_Name: modem
Backup_Display_Name: modem
Storage_Path: /modem
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl1 | /dev/block/mmcblk0p2 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p2
Display_Name: sbl1
Storage_Name: sbl1
Backup_Path: /sbl1
Backup_Name: sbl1
Backup_Display_Name: sbl1
Storage_Path: /sbl1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl2 | /dev/block/mmcblk0p3 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p3
Display_Name: sbl2
Storage_Name: sbl2
Backup_Path: /sbl2
Backup_Name: sbl2
Backup_Display_Name: sbl2
Storage_Path: /sbl2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl3 | /dev/block/mmcblk0p4 | Size: 2MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p4
Display_Name: sbl3
Storage_Name: sbl3
Backup_Path: /sbl3
Backup_Name: sbl3
Backup_Display_Name: sbl3
Storage_Path: /sbl3
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/rpm | /dev/block/mmcblk0p6 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p6
Display_Name: rpm
Storage_Name: rpm
Backup_Path: /rpm
Backup_Name: rpm
Backup_Display_Name: rpm
Storage_Path: /rpm
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/tz | /dev/block/mmcblk0p8 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: tz
Storage_Name: tz
Backup_Path: /tz
Backup_Name: tz
Backup_Display_Name: tz
Storage_Path: /tz
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/modem_st1 | /dev/block/mmcblk0p10 | Size: 3MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p10
Display_Name: modem_st1
Storage_Name: modem_st1
Backup_Path: /modem_st1
Backup_Name: modem_st1
Backup_Display_Name: modem_st1
Storage_Path: /modem_st1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/modem_st2 | /dev/block/mmcblk0p11 | Size: 3MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p11
Display_Name: modem_st2
Storage_Name: modem_st2
Backup_Path: /modem_st2
Backup_Name: modem_st2
Backup_Display_Name: modem_st2
Storage_Path: /modem_st2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/aboot | /dev/block/mmcblk0p5 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p5
Display_Name: aboot
Storage_Name: aboot
Backup_Path: /aboot
Backup_Name: aboot
Backup_Display_Name: aboot
Storage_Path: /aboot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p7 | Size: 24MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p23 | Size: 2113MB Used: 1727MB Free: 386MB Backup Size: 1727MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p23
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p36 | Size: 11304MB Used: 0MB Free: 11175MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p36
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p24 | Size: 788MB Used: 15MB Free: 773MB Backup Size: 15MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p27 | Size: 24MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p27
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 1933MB Used: 1778MB Free: 154MB Backup Size: 1778MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: Micro SDcard
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/08faffb79c96eb46'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands: ro.boot.hardware=awifi
ro.boot.emmc=true
ro.boot.serialno=08faffb79c96eb46
ro.boot.baseband=apq
ro.serialno=08faffb79c96eb46
ro.bootmode=unknown
ro.baseband=apq
ro.bootloader=unknown
ro.hardware=awifi
ro.revision=11
ro.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JLS36I
ro.build.display.id=cm_v500-eng 4.3.1 JLS36I 256a257cdc test-keys
ro.build.version.incremental=256a257cdc
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3.1
ro.build.date=Tue Dec 31 09:34:19 CST 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=drgravy
ro.build.host=drgravy-i7
ro.build.tags=test-keys
ro.product.model=LG-V500
ro.product.brand=lge
ro.product.name=cm_v500
ro.product.device=v500
ro.product.board=awifi
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=v500
ro.build.description=cm_v500-eng 4.3.1 JLS36I 256a257cdc test-keys
ro.build.fingerprint=lge/cm_v500/v500:4.3.1/JLS36I/256a257cdc:eng/test-keys
ro.build.characteristics=default
ro.cm.device=v500
ro.rommanager.developerid=cyanogenmod
ro.com.google.clientidbase=android-google
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
persist.sys.root_access=1
ro.cm.version=10.2-20131231-UNOFFICIAL-v500
ro.modversion=10.2-20131231-UNOFFICIAL-v500
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.opengles.version=196608
persist.audio.handset.mic.type=digital
persist.audio.dualmic.config=endfire
persist.audio.fluence.voicecall=true
persist.audio.handset.mic=dmic
persist.audio.fluence.mode=endfire
persist.audio.lowlatency.rec=false
af.resampler.quality=4
persist.hwc.mdpcomp.enable=true
drm.service.enabled=true
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
media.aac_51_output_enabled=true
debug.egl.recordable.rgba8888=1
ro.qc.sensors.wl_dis=true
ro.qualcomm.sensors.smd=true
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.sf.lcd_density=480
ro.bt.bdaddr_path=/data/misc/bdaddr
ro.telephony.default_network=9
telephony.lteOnGsmDevice=1
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.r_buffer_cache_size=4
ro.hwui.path_cache_size=24
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=5
ro.hwui.texture_cache_flushrate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.kernel.android.checkjni=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
Running boot script...
/sbin/postrecoveryboot.sh: line 5: can't create /sys/class/leds/button-backlight/brightness: nonexistent directory
/sbin/postrecoveryboot.sh: line 6: can't create /sys/class/leds/R/device/led_blink: nonexistent directory
I:/sbin/postrecoveryboot.sh process ended with ERROR=1
Finished running boot script.
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/TWRP/.twrps'.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/08faffb79c96eb46'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:Switching packages (TWRP)
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
In over 15 years of R&D testing of STBs and embedded devcies I´ve never seen such a f***ing flawed recovery design.
First of all it should never happen that connection to first stage bootloader is not possible anymore via ADB or (USB)serial. Then all recovery images lack of a real erase function, removing really all data and file rights by zeroing the sectors.
Damn, that bricked device was a real tricky one.
So here my solution for the boot loop (I don´t know if it does work for others but I will not go try this again....)
Install the LG Mobile Tools and start them. There is no need to set to Korea as country as described in some manuals (later more). Now install the offered device drivers if they (or newer drivers) are not already installed on your PC.
Boot into recovery whether it does it on itself, by "adb reboot recovery" or with the hardware key combination.
In recovery mode swipe system, data, cache, dalvik etc. Swipe really EVERYTHING your recovery does allow you to swipe.
In recovery call the boot-to-system function. Some recovery images may now offer to root the device, ignore this.
When the reboot started press both volume keys together and hold them until the download mode is activated (screen will be almost black with a very faded infobanner which signalizes download mode is enabled).
Connect the pad to the PC. The LG Mobile tools will automatically identify the device if connection can be established and show up if a software upgrade is available. Therefore no need to set up before to Korea as country since it does switch itself to the correct settings. If a software upgrade is offered then start it, if it says you have already the newest version then go to option and start a recover/repair update. In case a connection is not established try another USB port. For me it worked for e.g. with an USB3.0 port but it should also work with USB 2.0 ports. In some cases an active USB hub may help since they are powered externally.
Hope this might help others with the same problem.
Some words from me regarding the dyn.Kernel: do not flash it if it is not already confirmed that it will work together with your installed ROM version. I don´t know what really went wrong with it, but in my personal opinion there is a high risk to get this boot loop again which is really hard to break since normal swiping/reflashing did not work anymore on my device and LG recovery and ADB were affected, too.
I just found this thread after I had a similar experience.
In matter of fact the LG mobile tool helped. Since the mobile tool deletes and overrides everything is it easy to recover:
Turn of the device
Start LG Mobile tool (check that LG driver is installed)
Push volume up and down at the same time (not power button)
Plug into USB port
Release volume buttons
Now you can continue with LG Mobile tool
Do want to have the procedure again, took me a long time to get it fixed...
My mistake: Started OTA update with root which brought into situation above. I thought it would be worth to try with only deleting via SuperSu but root is not removed completely...
Gesendet von meinem LG-V500 mit Tapatalk
dummy1001 said:
I just found this thread after I had a similar experience.
In matter of fact the LG mobile tool helped. Since the mobile tool deletes and overrides everything is it easy to recover:
Turn of the device
Start LG Mobile tool (check that LG driver is installed)
Push volume up and down at the same time (not power button)
Plug into USB port
Release volume buttons
Now you can continue with LG Mobile tool
Do want to have the procedure again, took me a long time to get it fixed...
My mistake: Started OTA update with root which brought into situation above. I thought it would be worth to try with only deleting via SuperSu but root is not removed completely...
Gesendet von meinem LG-V500 mit Tapatalk
Click to expand...
Click to collapse
Thank you! This worked beautifully for me. I, too, took the OTA with root and got stuck in the TWRP boot loop. Was hopeful of a successful install even if losing root because of other's saying that they did without unrooting first. Lesson learned.
Thanks, you saved me. Power off GPad and after downloading driver press vol up and down at the same time. choose recovery from options in LG mobile support tool.
thanks
dummy1001 said:
I just found this thread after I had a similar experience.
In matter of fact the LG mobile tool helped. Since the mobile tool deletes and overrides everything is it easy to recover:
Turn of the device
Start LG Mobile tool (check that LG driver is installed)
Push volume up and down at the same time (not power button)
Plug into USB port
Release volume buttons
Now you can continue with LG Mobile tool
Do want to have the procedure again, took me a long time to get it fixed...
My mistake: Started OTA update with root which brought into situation above. I thought it would be worth to try with only deleting via SuperSu but root is not removed completely...
Gesendet von meinem LG-V500 mit Tapatalk
Click to expand...
Click to collapse
i registered the forum just for thank you. thank you my friend

[Q&A] [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]

Q&A for [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
htc one m8 ul_ca
Will this version work on my htc one m8 ul_ca? Attempted root with twrp 2.7.0.2 using the all in one toolkit from Hasoon however the recovery was never properly flashed. the screen stalled at download and did nothing. I rebooted and everything was fine but no idea as to what the problem is.
ShinAkira00 said:
Will this version work on my htc one m8 ul_ca? Attempted root with twrp 2.7.0.2 using the all in one toolkit from Hasoon however the recovery was never properly flashed. the screen stalled at download and did nothing. I rebooted and everything was fine but no idea as to what the problem is.
Click to expand...
Click to collapse
Yes.
xunholyx said:
Yes.
Click to expand...
Click to collapse
Thanks but any ideas why i may be getting this error "FAILED (status read failed (Too many links)" when attempting root?
ShinAkira00 said:
Thanks but any ideas why i may be getting this error "FAILED (status read failed (Too many links)" when attempting root?
Click to expand...
Click to collapse
Go here.
This is the way I did root on my M8.
Getting an error when trying to do an ordinary nandroid backup to my external 64gb sdcard.
Unable to create folder /sdcard2/TWRP/BACKUPS
The external sd card mounts just fine - in fact I created the folder myself to just see what would happen and still got the error. Any ideas?
I can't able to download Twrp 2.8.1.0 my download is not connecting at 99.9%
It will be helpful if anyone give me alternative link please!
Thank you
2.8.1 E:Resource type (font) failed to load....
hi ther
so, long story short. i updated my firmware using the methods from http://forum.xda-developers.com/htc-...uu-m8-t2813792 to 3.28.401.9 and it was succesful. flashed twrp 2.8.1 and then installed latest android revolution rom via twrp which says its succesful but i'm getting a "E:Resource type (font) failed to load error 3 times in a row and my rom won't boot. i'm thinking they are related maybe? below isthe contents of the recovery log file. please let me know what i need to do here.
thanks
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.8.1.0 on Wed Jan 1 08:43:34 2014
TW_INCLUDE_DUMLOCK := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/msm_dwc3/f9200000.dwc3/gadget/lun0/file'
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
Starting the UI...Pixel format: 1080x1920 @ 32bpp
Pixel format: RGBX_8888
Not using qualcomm overlay, 'mdssfb_90000'
framebuffer: fd 4 (1080 x 1920)
minui: /sys/board_properties/virtualkeys.synaptics-rmi-touchscreen is 5 % 6
=> Linking mtab
=> Processing recovery.fstab
Irocessing '/misc'
Irocessing '/boot'
Irocessing '/cache'
Irocessing '/system'
Irocessing '/data'
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:mount '/data/media' '/sdcard' process ended with RC=0
Irocessing '/devlog'
I:Created '/devlog' folder.
Irocessing '/external_sd'
I:Created '/external_sd' folder.
Irocessing '/sd-ext'
I:Created '/sd-ext' folder.
Irocessing '/usb_otg'
I:Created '/usb_otg' folder.
I:Created '/and-sec' folder.
I:Creating Android Secure: /external_sd/.android_secure
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
WARN: volume was not unmounted cleanly.
I:mount '/external_sd/.android_secure' '/and-sec' process ended with RC=0
I:Backup folder set to '/data/media/TWRP/BACKUPS/SH442WM10676'
I:Settings storage is '/data/media'
Updating partition details...
Iata backup size is 205MB, free: 25198MB.
I:Unable to mount '/sd-ext'
I:Actual block device: '', current file system: 'ext4'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/misc | /dev/block/mmcblk0p24 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p42 | Size: 16MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p42
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/cache | /dev/block/mmcblk0p46 | Size: 678MB Used: 10MB Free: 667MB Backup Size: 10MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p46
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mmcblk0p45 | Size: 1020MB Used: 1020MB Free: 0MB Backup Size: 1020MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p45
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p47 | Size: 25532MB Used: 205MB Free: 25198MB Backup Size: 205MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p47
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/devlog | /dev/block/mmcblk0p39 | Size: 29MB Used: 25MB Free: 4MB Backup Size: 25MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p39
Display_Name: devlog
Storage_Name: devlog
Backup_Path: /devlog
Backup_Name: devlog
Backup_Display_Name: devlog
Storage_Path: /devlog
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/external_sd | /dev/block/mmcblk1p1 | Size: 60890MB Used: 21138MB Free: 39752MB Backup Size: 480MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI Removable IsPresent Has_Android_Secure Is_Storage
Symlink_Path: /external_sd/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /external_sd
Current_File_System: exfat
Fstab_File_System: vfat
Backup_Method: files
/sd-ext | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI Removable Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mmcblk1p2
Display_Name: SD-Ext
Storage_Name: SD-Ext
Backup_Path: /sd-ext
Backup_Name: sd-ext
Backup_Display_Name: SD-Ext
Storage_Path: /sd-ext
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/usb_otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb_otg
Backup_Name: usb_otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb_otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
E:Resource type (font) failed to load
E:Resource type (font) failed to load
E:Resource type (font) failed to load
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/SH442WM10676'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page Vibrate
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
Startup Commands:
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.com.android.wifi-watchlist=GoogleGuest
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.boot.dq=PASS
ro.boot.lb=1
ro.boot.cid=11111111
ro.boot.mid=0P6B17000
ro.boot.emmc=true
ro.boot.mode=recovery
ro.boot.podt=0x3E8
ro.boot.ddrmid=(0x1)
ro.boot.carrier=ALL
ro.boot.keycaps=qwerty
ro.boot.baseband=1.22.21331147A1.29G
ro.boot.hardware=qcom
ro.boot.pagesize=2048
ro.boot.rom_type=NORMAL
ro.boot.serialno=SH442WM10676
ro.boot.devicerev=5
ro.boot.bootloader=3.19.0.0000
ro.boot.efuse_info=FL
ro.boot.batt_poweron=good_battery
ro.emmc=0
ro.hwui.path_cache_size=24
ro.hwui.layer_cache_size=32
ro.hwui.texture_cache_size=48
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=4
ro.hwui.drop_shadow_cache_size=5
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.5
ro.omni.device=m8
ro.omni.version=4.4.4-20141023-m8-HOMEMADE
ro.twrp.boot=1
ro.twrp.version=2.8.1.0
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8974
ro.build.id=KTU84P
ro.build.date=Thu Oct 23 03:17:55 UTC 2014
ro.build.date.utc=0
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=dees_troy
ro.build.display.id=omni_m8-eng 4.4.4 KTU84P 4ef4c299f5 test-keys
ro.build.product=m8
ro.build.version.sdk=19
ro.build.version.release=4.4.4
ro.build.version.codename=REL
ro.build.version.incremental=4ef4c299f5
ro.build.description=1.54.401.5 CL325784 release-keys
ro.build.fingerprint=htc/htc_europe/htc_m8:4.4.2/KOT49H/325784.5:user/release-keys
ro.build.characteristics=default
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Argon.ogg
ro.config.notification_sound=pixiedust.ogg
ro.kernel.android.checkjni=1
ro.secure=0
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.board=MSM8974
ro.product.brand=htc
ro.product.model=HTC One_M8
ro.product.device=m8
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=htc
ro.baseband=1.22.21331147A1.29G
ro.bootmode=recovery
ro.hardware=qcom
ro.revision=0
ro.serialno=SH442WM10676
ro.9kramdump=0
ro.telephony.default_network=9
ro.bootloader=3.19.0.0000
ro.debuggable=1
ro.modversion=OmniROM-4.4.4-20141023-m8-HOMEMADE
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
net.bt.name=Android
net.change=net.bt.name
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.chargeled=running
init.svc.choice_fn=stopped
twrp.crash_counter=0
dalvik.vm.heapsize=512m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.root_access=1
service.adb.root=1
keyguard.no_require_sim=true
telephony.lteOnGsmDevice=1
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/TWRP/.twrps'.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/SH442WM10676'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:TWFunc::Fixup_Time: Pre-fix date and time: 2014-01-01--02-43-36
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
I:Cannot find file /sys/class/android_usb/android0/idVendor
I:Cannot find file /sys/class/android_usb/android0/idProduct
twrp addStorage /data/media, mtpstorageid: 65537
twrp addStorage /external_sd, mtpstorageid: 65538
Starting MTP
MTP Enabled
created new mtpserver object
adding internal storage
I:Switching packages (TWRP)
MtpStorage id: 65537 path: /data/media
I:Starting command line thread
E:inotify_add_watch failed: Bad file number
MtpStorage id: 65538 path: /external_sd
MtpServer::run fd: 16
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
Can recovery be flashed via 0p6bimg method? I don't have access to my laptop
muppetmaster916 said:
Can recovery be flashed via 0p6bimg method? I don't have access to my laptop
Click to expand...
Click to collapse
If it's a zip file, yes.
Magnum_Enforcer said:
If it's a zip file, yes.
Click to expand...
Click to collapse
Where would I go about finding a recovery.zip rather than the .img that they typically are.
muppetmaster916 said:
Where would I go about finding a recovery.zip rather than the .img that they typically are.
Click to expand...
Click to collapse
Take a look in the link below. Just fyi, using Flashify from the Play store works, too. It allows flashing of zip & img files.
http://themikmik.com/showthread.php...OM-TWRP-Recovery-v2-8-3-standard-TWRP-2-8-3-0
TWRP 2.8.4.0 won't boot.
I've tried to install 2.8.4.0 about a dozen times. Checked the md5. When booting it always stops at the white HTC boot screen. Same with 2.8.3.0.
The latest version I can get to install and actually boot is 2.8.1.0.
Any ideas?
Thanks,
Mike
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.21331931.LA11G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c3d94491
hbootpreupdate: 11
gencheckpt: 0
jmb6420 said:
I've tried to install 2.8.4.0 about a dozen times. Checked the md5. When booting it always stops at the white HTC boot screen. Same with 2.8.3.0.
The latest version I can get to install and actually boot is 2.8.1.0.
Any ideas?
Thanks,
Mike
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.21331931.LA11G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c3d94491
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
You need to update your firmware. Your bootloader is too old for the newer recovery version.
xunholyx said:
You need to update your firmware. Your bootloader is too old for the newer recovery version.
Click to expand...
Click to collapse
Thank you. I thought I had to install 2.8.4.0 PRIOR to updating my firmware. Makes sense now.
TWRP Issue
I was wondering if anyone could help me out with this problem I have been having. I recently bought an HTC One M8 from AT&T. I unlocked the boot loader through a Sunshine license I already owned. Anytime I flash TWRP after 2.8.1.0, the phone hangs on the HTC screen with the purple texts that says, "Entering Recovery....". I have tried everything I can think of. Any help would be greatly appreciated! Thank you in advance!
EDIT: I apologize, I believe I may have the old bootloader firmware issue, I will try to update the firmware and see if that fixes my issue.
slimkat and carbon 4.4.4 r2 problem gt-p6200 plus
Plus GT-P6200
a bluetooth connection is good but breaking speech
my bluetooth Plantronics | Voyager Legend
one bass and one-off does not work
bluetooth breaks and sometimes we need to reboot.
but it will not restart unless gsm
TWRP backups restoring, but lots of errors in apps.
OK... I'm at a loss. I've Googled and I've read this entire thread and can't find a solution.
I have a T-mobile HTC One M8 and here are the steps I've taken.
Using fastboot, I flash the t-mobile stock recovery onto the phone, lock the bootloader, then boot into fastboot and run the latest T-mobile RUU to completely restore the phone to stock.
I boot, run through the setup and then shutdown the phone. I boot into fastboot, unlock the bootloader (using fastboot) and flash the 2.8.5.0 TWRP recovery onto the device. After I do this, I reboot the phone and it goes through all of the setup steps again, as if I hadn't done it the first time. After running through setup, I shut down the phone and boot into recovery.
I perform a backup of system, data and boot and have it saved to the SD card. After it complete's successfully, I reboot the device and confirm that everything is working correctly.
Shutdown, boot to recovery and I then use the default wipe. Then I restore the backup I just made of the stock ROM. After the restore completes successfully, I reboot the device and after it boots up, I get a "Unfortunately, System UI has stopped working." and after tapping OK, nothing works. If I click the app drawer, it comes up but the dock at the bottom disappears and doesn't come back. Apps don't work.
I've also tried it with the Viper One ROM. Same steps as above, except I install the ROM, boot into the ROM, complete setup, and then back it up from recovery. After restoring I get various errors and apps are unable to function correctly.
Any ideas?
Thanks in advance for any help!
After installation of twrp-2.8.6.0-m8.img, I am not able to enter the recovery any more
Tested with installation through TWRP (v2.8.5) and via fastboot. This issue is reproducible.
Anyone experiencing the same issue?
MarioBrosN5 said:
After installation of twrp-2.8.6.0-m8.img, I am not able to enter the recovery any more
Tested with installation through TWRP (v2.8.5) and via fastboot. This issue is reproducible.
Anyone experiencing the same issue?
Click to expand...
Click to collapse
Any kind of response will be really appreciated. If it is necessary I can provide any kind of log files.
Thx in advance for your assistance.

[Q] Flashing Cyanogenmod 11 (4.4.4)

Hi, i had on my previous phone (desire s) and on my new phone (primou) a lot of roms tested, but nothing was working.
Now i have http://forum.xda-developers.com/showthread.php?t=2785779 but only the beta-32 is working, exept the wifi and when it stays 2 minutes in sleepig mode, it crashes. on my previous phone it doen't startup, it was s-off(it shows the htc logo and no thing more). I did always an factory reset. Log by installing the newer versions of this rom:
Code:
Starting TWRP 2.6.3.0 on Wed Mar 25 11:23:09 2015
TW_INCLUDE_DUMLOCK := true
I:Single storage only.
I:No internal storage defined.
I:No storage defined, defaulting to /sdcard.
I:Lun file '/sys/class/android_usb/android0/f_mass_storage/lun0/file'
Starting the UI...Pixel format: 480x800 @ 32bpp
Pixel format: BGR_565
framebuffer: fd 3 (480 x 800)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/recovery'
I:Processing '/boot'
I:Processing '/cache'
I:Processing '/data'
I:Processing '/sdcard'
I:Created '/and-sec' folder.
I:Creating Android Secure: /sdcard/.android_secure
I:mount '/sdcard/.android_secure' '/and-sec' process ended with RC=0
I:Processing '/system'
I:Processing '/misc'
I:Processing '/devlog'
I:Created '/devlog' folder.
I:Backup folder set to '/sdcard/TWRP/BACKUPS/SH267TV05796'
I:Settings storage is '/sdcard'
Updating partition details...
I:Unmounting main partitions...
Partition Logs:
/recovery | /dev/block/mmcblk0p21 | Size: 8MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p21
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p22 | Size: 4MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p22
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/cache | /dev/block/mmcblk0p28 | Size: 173MB Used: 16MB Free: 156MB Backup Size: 16MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p28
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p26 | Size: 960MB Used: 165MB Free: 795MB Backup Size: 165MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mmcblk0p26
Display_Name: Data
Storage_Name: Data
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/sdcard | /dev/block/mmcblk1p1 | Size: 1877MB Used: 801MB Free: 1075MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI Removable IsPresent Has_Android_Secure Is_Storage Is_Settings_Storage
Symlink_Path: /sdcard/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: sdcard
Storage_Name: sdcard
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /sdcard
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
/system | /dev/block/mmcblk0p25 | Size: 785MB Used: 427MB Free: 357MB Backup Size: 427MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p25
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/misc | /dev/block/mmcblk0p17 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p17
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/devlog | /dev/block/mmcblk0p29 | Size: 22MB Used: 6MB Free: 16MB Backup Size: 6MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p29
Display_Name: devlog
Storage_Name: devlog
Backup_Path: /devlog
Backup_Name: devlog
Backup_Display_Name: devlog
Storage_Path: /devlog
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/sdcard/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/sdcard/TWRP/BACKUPS/SH267TV05796'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
Startup Commands: ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=IMM76L
ro.build.display.id=cm_primou-eng 4.0.4 IMM76L eng.dees_troy.20130913.171658 test-keys
ro.build.version.incremental=eng.dees_troy.20130913.171658
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri Sep 13 17:17:09 UTC 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=dees_troy
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.product.model=primou
ro.product.brand=htc
ro.product.name=cm_primou
ro.product.device=primou
ro.product.board=primou
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=htc
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8255
ro.build.product=primou
ro.build.description=cm_primou-eng 4.0.4 IMM76L eng.dees_troy.20130913.171658 test-keys
ro.build.fingerprint=htc/cm_primou/primou:4.0.4/IMM76L/eng.dees_troy.20130913.171658:eng/test-keys
ro.build.characteristics=default
ro.cm.device=primou
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=9.0.0-RC0-primou-UNOFFICIAL
ro.modversion=9.0.0-RC0-primou-UNOFFICIAL
ro.config.ringtone=CyanTone.ogg
ro.config.notification_sound=CyanMessage.ogg
ro.config.alarm_alert=CyanAlarm.ogg
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=SH267TV05796
ro.bootmode=recovery
ro.baseband=3831.24.01.30_M
ro.carrier=HTC-Dutch
ro.bootloader=1.18.0000
ro.hardware=primou
ro.revision=2
ro.emmc=1
init.svc.choice_fn=stopped
init.svc.dmesg=stopped
init.svc.adbd=stopping
service.adb.root=1
init.svc.recovery=running
Running boot script...
I:/sbin/postrecoveryboot.sh process ended with RC=0
Finished running boot script.
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/sdcard/TWRP/.twrps'.
I:Backup folder set to '/sdcard/TWRP/BACKUPS/SH267TV05796'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip.md5
Skipping MD5 check: no MD5 file found.
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
about to run program [/tmp/backuptool.sh] with 2 args
about to run program [/tmp/otasigcheck.sh] with 1 args
Creating filesystem with parameters:
Size: 836759552
Block size: 4096
Blocks per group: 32768
Inodes per group: 7296
Inode size: 256
Journal blocks: 3191
Label:
Blocks: 204287
Block groups: 7
Reserved block group size: 55
Created filesystem with 11/51072 inodes and 6628/204287 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
minzip: Extracted 2 file(s)
I:Cannot find file /nobrightness
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
minzip: Extracted 1340 file(s)
ApplyParsedPerms: lsetfilecon of /system/lost+found to u:object_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip'
Error flashing zip '/sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip'
Updating partition details...
I:Set page: 'flash_done'
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /sdcard/recovery.log
I ame an beginner, i could not sent it in the forum. :silly:
I don't know it is the good code...
Pleas send any tips and trucs to install this good... (only if you have that )
I had overclock the lower limit, but the result is the same. Only on charger it will run good. The wifi take 10 minutes to turn on. And about 2 min. it wil crashes........
Please do not pay attention to my language, I am a Dutchman.
You can also send an real working rom (4.4.x / 5.X)
oes20 said:
Hi, i had on my previous phone (desire s) and on my new phone (primou) a lot of roms tested, but nothing was working.
Now i have http://forum.xda-developers.com/showthread.php?t=2785779 but only the beta-32 is working, exept the wifi and when it stays 2 minutes in sleepig mode, it crashes. on my previous phone it doen't startup, it was s-off(it shows the htc logo and no thing more). I did always an factory reset. Log by installing the newer versions of this rom:
Code:
Starting TWRP 2.6.3.0 on Wed Mar 25 11:23:09 2015
TW_INCLUDE_DUMLOCK := true
I:Single storage only.
I:No internal storage defined.
I:No storage defined, defaulting to /sdcard.
I:Lun file '/sys/class/android_usb/android0/f_mass_storage/lun0/file'
Starting the UI...Pixel format: 480x800 @ 32bpp
Pixel format: BGR_565
framebuffer: fd 3 (480 x 800)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/recovery'
I:Processing '/boot'
I:Processing '/cache'
I:Processing '/data'
I:Processing '/sdcard'
I:Created '/and-sec' folder.
I:Creating Android Secure: /sdcard/.android_secure
I:mount '/sdcard/.android_secure' '/and-sec' process ended with RC=0
I:Processing '/system'
I:Processing '/misc'
I:Processing '/devlog'
I:Created '/devlog' folder.
I:Backup folder set to '/sdcard/TWRP/BACKUPS/SH267TV05796'
I:Settings storage is '/sdcard'
Updating partition details...
I:Unmounting main partitions...
Partition Logs:
/recovery | /dev/block/mmcblk0p21 | Size: 8MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p21
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p22 | Size: 4MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p22
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/cache | /dev/block/mmcblk0p28 | Size: 173MB Used: 16MB Free: 156MB Backup Size: 16MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p28
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p26 | Size: 960MB Used: 165MB Free: 795MB Backup Size: 165MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mmcblk0p26
Display_Name: Data
Storage_Name: Data
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/sdcard | /dev/block/mmcblk1p1 | Size: 1877MB Used: 801MB Free: 1075MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI Removable IsPresent Has_Android_Secure Is_Storage Is_Settings_Storage
Symlink_Path: /sdcard/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: sdcard
Storage_Name: sdcard
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /sdcard
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
/system | /dev/block/mmcblk0p25 | Size: 785MB Used: 427MB Free: 357MB Backup Size: 427MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p25
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/misc | /dev/block/mmcblk0p17 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p17
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/devlog | /dev/block/mmcblk0p29 | Size: 22MB Used: 6MB Free: 16MB Backup Size: 6MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p29
Display_Name: devlog
Storage_Name: devlog
Backup_Path: /devlog
Backup_Name: devlog
Backup_Display_Name: devlog
Storage_Path: /devlog
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/sdcard/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/sdcard/TWRP/BACKUPS/SH267TV05796'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
Startup Commands: ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=IMM76L
ro.build.display.id=cm_primou-eng 4.0.4 IMM76L eng.dees_troy.20130913.171658 test-keys
ro.build.version.incremental=eng.dees_troy.20130913.171658
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Fri Sep 13 17:17:09 UTC 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=dees_troy
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.product.model=primou
ro.product.brand=htc
ro.product.name=cm_primou
ro.product.device=primou
ro.product.board=primou
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=htc
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8255
ro.build.product=primou
ro.build.description=cm_primou-eng 4.0.4 IMM76L eng.dees_troy.20130913.171658 test-keys
ro.build.fingerprint=htc/cm_primou/primou:4.0.4/IMM76L/eng.dees_troy.20130913.171658:eng/test-keys
ro.build.characteristics=default
ro.cm.device=primou
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=9.0.0-RC0-primou-UNOFFICIAL
ro.modversion=9.0.0-RC0-primou-UNOFFICIAL
ro.config.ringtone=CyanTone.ogg
ro.config.notification_sound=CyanMessage.ogg
ro.config.alarm_alert=CyanAlarm.ogg
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=SH267TV05796
ro.bootmode=recovery
ro.baseband=3831.24.01.30_M
ro.carrier=HTC-Dutch
ro.bootloader=1.18.0000
ro.hardware=primou
ro.revision=2
ro.emmc=1
init.svc.choice_fn=stopped
init.svc.dmesg=stopped
init.svc.adbd=stopping
service.adb.root=1
init.svc.recovery=running
Running boot script...
I:/sbin/postrecoveryboot.sh process ended with RC=0
Finished running boot script.
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/sdcard/TWRP/.twrps'.
I:Backup folder set to '/sdcard/TWRP/BACKUPS/SH267TV05796'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip'...
Checking for MD5 file...
I:Cannot find file /sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip.md5
Skipping MD5 check: no MD5 file found.
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
about to run program [/tmp/backuptool.sh] with 2 args
about to run program [/tmp/otasigcheck.sh] with 1 args
Creating filesystem with parameters:
Size: 836759552
Block size: 4096
Blocks per group: 32768
Inodes per group: 7296
Inode size: 256
Journal blocks: 3191
Label:
Blocks: 204287
Block groups: 7
Reserved block group size: 55
Created filesystem with 11/51072 inodes and 6628/204287 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
minzip: Extracted 2 file(s)
I:Cannot find file /nobrightness
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
minzip: Extracted 1340 file(s)
ApplyParsedPerms: lsetfilecon of /system/lost+found to u:object_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
E:Error executing updater binary in zip '/sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip'
Error flashing zip '/sdcard/cm-11-20150313-UNOFFICIAL-BETA-48_byRastomanchik-primou.zip'
Updating partition details...
I:Set page: 'flash_done'
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /sdcard/recovery.log
I ame an beginner, i could not sent it in the forum. :silly:
I don't know it is the good code...
Pleas send any tips and trucs to install this good... (only if you have that )
I had overclock the lower limit, but the result is the same. Only on charger it will run good. The wifi take 10 minutes to turn on. And about 2 min. it wil crashes........
Please do not pay attention to my language, I am a Dutchman.
You can also send an real working rom (4.4.x / 5.X)
Click to expand...
Click to collapse
To install this rom, you need to flash a recovery with a selinux-enabled kernel. Use the latest version of my TWRP-Recovery.
Click to expand...
Click to collapse
Written in big red text: http://forum.xda-developers.com/htc-one-v/orig-development/rom-cyanogenmod-11-t3055617
Thanx, i'v read any things about that, but in the how-to is'nt written any thing about that.
But, i'v fixed the bug: remove the lockscreen...
oes20 said:
Thanx, i'v read any things about that, but in the how-to is'nt written any thing about that.
But, i'v fixed the bug: remove the lockscreen...
Click to expand...
Click to collapse
Maybe you're talking about rastomanchiks rom. I was talking about my own one.
Do you mean the bug when the lockscreen doesn't work?
I don't have that bug, I don't know why some people have it, but yes that's a solution.
jonas2790 said:
Maybe you're talking about rastomanchiks rom. I was talking about my own one.
Do you mean the bug when the lockscreen doesn't work?
I don't have that bug, I don't know why some people have it, but yes that's a solution.
Click to expand...
Click to collapse
The rom i've installed is version beta-52, the phone doesn't awake after 30 seconds, i said that i've fixed this, but after the update the bug come back. :crying:
oes20 said:
The rom i've installed is version beta-52, the phone doesn't awake after 30 seconds, i said that i've fixed this, but after the update the bug come back. :crying:
Click to expand...
Click to collapse
What rom are you talking about, Rastomanchiks or my cm11 builds?

Unable to flash ROM, can only access recovery, can't wipe or restore

I installed LineageOS 14.1 a few days ago, and it worked OK for one day. Then my phone froze and restarted, and got into a bootloop. So I tried reflashing the ROM, but TWRP never finished flashing. I tried wiping and it failed as well.
I can only access TWRP (3) recovery, can't wipe or flash ROMs. When I try to do it this is the error I get:
Code:
Failed to mount '/system' (Invalid argument)
Here is the recovery log in full after trying to flash a ROM (sometimes it just gets stuck and doesn't even let me save the log):
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 3.0.2-0 on Thu Jan 1 00:31:13 1970
(pid 201)
RECOVERY_SDCARD_ON_DATA := true
TW_NO_USB_STORAGE := true
TW_INCLUDE_CRYPTO := true
I:Found brightness file at '/sys/devices/f9967000.i2c/i2c-0/0-0036/backlight/lm3697/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:LANG: en
Starting the UI...Overlay graphics may work (mdssfb_80000), but not enabled. Use TW_TARGET_USES_QCOM_BSP := true to enable.
Skipping adf graphics -- not present in build tree
Skipping drm graphics -- not present in build tree
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 24 .length = 8
vi.green.offset = 16 .length = 8
vi.blue.offset = 8 .length = 8
setting GGL_PIXEL_FORMAT_RGBX_8888
double buffered
framebuffer: 3 (1440 x 2560)
Using fbdev graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Scaling theme width 1.333333x and height 1.333333x, offsets x: 0 y: 0
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/boot'
I:Processing '/system'
I:Processing '/data'
I:Processing '/cache'
I:Processing '/recovery'
I:Processing '/efs1'
I:Processing '/efs2'
I:Processing '/external_sd'
I:Created '/external_sd' folder.
I:Processing '/usb-otg'
I:Created '/usb-otg' folder.
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Setting up '/data' as data/media emulated storage.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/LGD855ae064087'
I:Settings storage is '/data/media/0'
I:Decrypt adopted storage starting
I:PageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
Updating partition details...
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk0p40 /system
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
I:exfat-fuse failed to mount with result 'FUSE exfat 1.2.2
', trying vfat
Failed to mount '/system' (Invalid argument)
I:Actual block device: '/dev/block/mmcblk0p40', current file system: 'vfat'
I:Data backup size is 0MB, free: 10926MB.
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Unmounting main partitions...
Partition Logs:
/boot | /dev/block/mmcblk0p18 | Size: 16MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p18
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p40 | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p40
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: vfat
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p43 | Size: 26123MB Used: 0MB Free: 10926MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p43
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
MTP_Storage_ID: 65537
/cache | /dev/block/mmcblk0p41 | Size: 598MB Used: 10MB Free: 588MB Backup Size: 10MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p41
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p20 | Size: 16MB
Flags: IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p20
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/efs1 | /dev/block/mmcblk0p21 | Size: 3MB
Flags: Can_Be_Backed_Up Has_SubPartition IsPresent
Primary_Block_Device: /dev/block/mmcblk0p21
Display_Name: EFS
Storage_Name: EFS
Backup_Path: /efs1
Backup_Name: efs1
Backup_Display_Name: EFS
Storage_Path: /efs1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/efs2 | /dev/block/mmcblk0p22 | Size: 3MB
Flags: Can_Be_Backed_Up Is_SubPartition IsPresent
SubPartition_Of: /efs1
Primary_Block_Device: /dev/block/mmcblk0p22
Display_Name: efs2
Storage_Name: efs2
Backup_Path: /efs2
Backup_Name: efs2
Backup_Display_Name: efs2
Storage_Path: /efs2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: external_sd
Storage_Name: external_sd
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: external_sd
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65538
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65539
I:Loading package: TWRP (/data/media/0/TWRP/theme/ui.zip)
I:Loading zip theme
I:Loading package: TWRP (/twres/ui.xml)
I:Load XML directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/uk.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/tr.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sv.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sl.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sk.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/ru.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/pt_BR.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/pl.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/nl.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/it.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/hu.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/fr.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/es.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/el.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/de.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/cz.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:PageManager::LoadFileToBuffer loading filename: '/twres/ui.xml' directly
I:Checking resolution...
I:Scaling theme width 1.333333x and height 1.333333x, offsets x: 0 y: 0
I:Loading resources...
I:Failed to load image from indeterminate013, error -1
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Including file: /twres/portrait.xml...
I:PageManager::LoadFileToBuffer loading filename: '/twres/portrait.xml' directly
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page flashimage_confirm
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backup_options
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page system_readonly_check
I:Loading page reboot
I:Loading page system_readonly
I:Loading page settings
I:Loading page settings_timezone
I:Loading page settings_screen
I:Loading page settings_vibration
I:Loading page settings_language
I:Loading page advanced
I:Loading page partsdcardsel
I:Loading page partsdcardcheck
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageraction
I:Loading page decrypt
I:Loading page decrypt_pattern
I:Loading page trydecrypt
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page fixcontexts
I:Loading page installsu
I:Loading page slideout
I:Loading page select_storage
I:Loading page select_language
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
I:Not using /misc, not defined in fstab.
I:Not using /misc, not defined in fstab.
Startup Commands:
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.com.android.wifi-watchlist=GoogleGuest
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.boot.emmc=true
ro.boot.baseband=msm
ro.boot.hardware=g3
ro.boot.serialno=LGD855ae064087
ro.boot.dlcomplete=0
ro.emmc=0
ro.omni.device=d855
ro.omni.version=4.4.4-20160528-d855-HOMEMADE
ro.twrp.boot=1
ro.twrp.version=3.0.2-0
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=
ro.build.id=KTU84P
ro.build.date=Fri May 27 20:25:07 EDT 2016
ro.build.date.utc=0
ro.build.host=build
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=jenkins
ro.build.display.id=omni_d855-eng 4.4.4 KTU84P 9 test-keys
ro.build.product=d855
ro.build.version.sdk=19
ro.build.version.release=4.4.4
ro.build.version.codename=REL
ro.build.version.incremental=9
ro.build.description=omni_d855-eng 4.4.4 KTU84P 9 test-keys
ro.build.fingerprint=LG/omni_d855/d855:4.4.4/KTU84P/9:eng/test-keys
ro.build.characteristics=default
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Argon.ogg
ro.config.notification_sound=pixiedust.ogg
ro.kernel.android.checkjni=1
ro.secure=0
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=omni_d855
ro.product.board=d855
ro.product.brand=LG
ro.product.model=G3
ro.product.device=d855
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=LG
ro.baseband=msm
ro.bootmode=unknown
ro.hardware=g3
ro.revision=10
ro.serialno=LGD855ae064087
ro.bootloader=unknown
ro.debuggable=1
ro.modversion=OmniROM-4.4.4-20160528-d855-HOMEMADE
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
net.bt.name=Android
net.change=net.bt.name
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.set_permissive=stopped
twrp.crash_counter=0
twrp.action_complete=0
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.root_access=1
service.adb.root=1
keyguard.no_require_sim=true
I:Copying file /cache/recovery/log to /cache/recovery/last_log
tw_get_context got selinux context: u:object_r:media_rw_data_file:s0
I:Got default contexts and file mode for storage files.
I:Attempt to load settings from settings file...
I:InfoManager loading from '/data/media/0/TWRP/.twrps'.
I:InfoManager file version has changed, not reading file
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/LGD855ae064087'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:Translating partition display names
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/LGD855ae064087'
I:TWFunc::Fixup_Time: Pre-fix date and time: 1969-12-31--19-31-16
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
I:sending message to add 65537 '/data/media/0' 'Internal Storage'
I:Message sent, add storage ID: 65537
Starting MTP
MTP Enabled
I:Switching packages (TWRP)
I:Set page: 'system_readonly'
created new mtpserver object
MtpServer::run fd: 22
mtppipe add storage 65537 '/data/media/0'
MtpStorage id: 65537 path: /data/media/0
I:Is_Mounted: Unable to find partition for path '/vendor'
I:operation_start: 'Toggle System Mount'
I:operation_end - status=1
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set overlay: 'select_storage'
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
WARN: volume was not unmounted cleanly.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/LGD855ae064087'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:operation_start: 'Flashing'
Installing zip file '/external_sd/lineage-14.1-20170130-nightly-d855-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
Checking for BASEBAND version 21C
Checking for BASEBAND version 21CTarget: lge/g3_global_com/g3:6.0/MRA58K/15351124649f4:user/release-keys
Target: lge/g3_global_com/g3:6.0/MRA58K/15351124649f4:user/release-keys
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
run_program: child exited with status 127
unmount of /system failed; no such volume
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
unmount of /system failed; no such volume
Creating filesystem with parameters:
Size: 2164260864
Block size: 4096
Blocks per group: 32768
Inodes per group: 7776
Inode size: 256
Journal blocks: 8256
Label:
Blocks: 528384
Block groups: 17
Reserved block group size: 135
Created filesystem with 11/132192 inodes and 17377/528384 blocks
warning: wipe_block_device: Wipe via secure discard suppressed due to bug in EMMC firmware
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
created [/system/etc/firmware/wcd9320]
created [/system/priv-app/MtpDocumentsProvider/lib]
created [/system/priv-app/MtpDocumentsProvider/lib/arm]
created [/system/app/Bluetooth/lib]
created [/system/app/Bluetooth/lib/arm]
created [/system/app/BluetoothExt/lib]
created [/system/app/BluetoothExt/lib/arm]
created [/system/priv-app/CMAudioService/lib]
created [/system/priv-app/CMAudioService/lib/arm]
created [/system/priv-app/DefaultContainerService/lib]
created [/system/priv-app/DefaultContainerService/lib/arm]
created [/system/priv-app/FMRadio/lib]
created [/system/priv-app/FMRadio/lib/arm]
created [/system/priv-app/Gallery2/lib]
created [/system/priv-app/Gallery2/lib/arm]
created [/system/app/LatinIME/lib]
created [/system/app/LatinIME/lib/arm]
created [/system/app/PacProcessor/lib]
created [/system/app/PacProcessor/lib/arm]
created [/system/app/Terminal/lib]
created [/system/app/Terminal/lib/arm]
created [/system/app/NfcNci/lib]
created [/system/app/NfcNci/lib/arm]
created [/system/app/PrintSpooler/lib]
created [/system/app/PrintSpooler/lib/arm]
created [/system/app/Eleven/lib]
created [/system/app/Eleven/lib/arm]
created [/system/app/PicoTts/lib]
created [/system/app/PicoTts/lib/arm]
ApplyParsedPerms: lsetfilecon of /system/xbin/zcat to u:object_r:system_file:s0 failed: Operation not supported on transport endpoint
ApplyParsedPerms: lsetfilecon of /system/xbin/zcat to u:object_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '/external_sd/lineage-14.1-20170130-nightly-d855-signed.zip'
Updating partition details...
I:Data backup size is 0MB, free: 10926MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
I:operation_end - status=1
I:Set overlay: 'slideout'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:operation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
Please help, thanks!
I was able to format it and now it sort it works!

Categories

Resources