[Q] Boot loop into TWRP / TWRP does not flash image (solved) - G Pad 8.3 Q&A, Help & Troubleshooting

I rooted a LG V500 and installed Malladus 1.2.5. Did work fine. Then I made the mistake to flash the dyn.Kernel r2. The device did not start anymore.
After going around with the tricky hardware keys I can get back to TWRP recovery and flash again an image ZIP (tested it with the already working Maladus Zip as also with CM11 nightly). Flashing did not show any errors but after rebooting to system it does not start the image instead it goes back to recovery or hangs at the LG screen (did also wait over an hour there). ADB does also not connect anymore also the drivers did work fine before.
Does anyone have a clue what I can do or what I have missed?

Meanwhile I upgraded TWRP to the newest version and changed recovery also to Philz CWM "Secure Booting Error! Device UnLock" is also shown. But Boot loop does still occur also after triggering all sorts of wipe and reflashing again.
ADB, Fastboot or sideload is still not available. Windows device driver does only show "LGE AndroidNET Serial Port".
The mentioned recovery methods do fail since the GPAD does not connect regardless if already in download mode or not.
Anyone some hints what I can try next?

Have you tried flashing cm11 or mahdi, just to check it's not a rom thing?

Both the newest CM11 and MAHDI ROMs show up with the boot loop. Its unclear for me why the recovery mode is still forced also after flashing a ROM. Did also try CMWs "Clean to Install a new ROM" which should wipe everything but no luck.

Weird, there shouldn't be any problem...
As far as I can tell - but I might be wrong - your only way out would be to go back to stock. I haven't tried it myself, cause my installs always got right, but this thread might do the job :
http://forum.xda-developers.com/showthread.php?t=2543350

Tried already to recover. With LGMobile Support tool no connection can be established no matter if in download mode or in recovery.
With Software Update or Flash Tool for KDZ also no luck since KDZ is there is an error after successful unpacking:
[R&D Test Tools Log File]
11:16:48 : Launching SW update
11:16:48 : Unpacking KDZ
11:19:46 : KDZ file extraced
11:19:46 : Extract file error
11:19:48 : ===FINISHED===

I can suggest two things,
One is a complete clutching at straws idea and the other is a bit scary if it doesn't work.
First is to extract the boot.img and try to flash just that and see what happens. I'm not sure if you would have to lokify it, I'm just brainstorming.
The other is to download quick adb and fastboot (from xda) several roms and twrp 2.3.0 first to your pc and then completely wipe your tablet. Then reinstall your drivers on your pc.
Then install twrp 2.3.0 on your tablet through adb. Then flash a rom.
Then hopefully boot up and then flash twrp 2.3.2 zip
I'm not shouting but I want to emphasise this
If you wipe the tablet and adb is still not working YOU MAY END UP WITH A BRICK.
I'm not confident, it would be great if someone with more experience could chip in.
Sent from my LG-V500 using XDA Premium HD app

Already gone through all of this.
Recovery is not the problem, I can flash and use TWRP 2.6.3.1/2.6.3.2 or Philz CWM. LOKI should also be working since the "Secure Booting Error" is shown.
ADB is NOT possible. I can not connect to ADB since in recovery both TWRP and CWM do not respond on ADB and the download mode does not support ADB in general. Drivers should be fine since the GPAD could be rooted via ADB before I flashed the dyn. Kernel.
Since ADB does not work that might be also the problem I can´t start the recovery.
To flash the original kernel or recovery I would need Flashify since those are only available as image files (.IMG) but I can´t do this from recovery.

Boot log from TWRP after it looped again into recovery and not into system:
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.6.3.2 on Sun Feb 22 05:53:00 1970
BOARD_HAS_NO_REAL_SDCARD := true
I:Single storage only -- data/media.
I:Device has /data/media defined.
I:Mount: Unable to find partition for path '/data'
TW_NO_REBOOT_BOOTLOADER := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/platform/usb_mass_storage/lun0/file' does not exist, USB storage mode disabled
Starting the UI...Pixel format: 1200x1920 @ 32bpp
Pixel format: RGBX_8888
framebuffer: fd 4 (1200 x 1920)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/modem'
I:Processing '/sbl1'
I:Processing '/sbl2'
I:Processing '/sbl3'
I:Processing '/rpm'
I:Processing '/tz'
I:Processing '/modem_st1'
I:Processing '/modem_st2'
I:Processing '/aboot'
I:Processing '/boot'
I:Processing '/system'
I:Processing '/data'
I:Created '/sdcard' folder.
I:mount '/data/media' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/TWRP/BACKUPS/08faffb79c96eb46'
I:Settings storage is '/data/media'
I:Processing '/cache'
I:Processing '/recovery'
I:Processing '/external_sd'
I:Created '/external_sd' folder.
Updating partition details...
I:Data backup size is 0MB, size: 11304MB, used: 0MB, free: 11175MB, in data/media: 0MB.
I:Unmounting main partitions...
Partition Logs:
/modem | /dev/block/mmcblk0p1 | Size: 64MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p1
Display_Name: modem
Storage_Name: modem
Backup_Path: /modem
Backup_Name: modem
Backup_Display_Name: modem
Storage_Path: /modem
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl1 | /dev/block/mmcblk0p2 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p2
Display_Name: sbl1
Storage_Name: sbl1
Backup_Path: /sbl1
Backup_Name: sbl1
Backup_Display_Name: sbl1
Storage_Path: /sbl1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl2 | /dev/block/mmcblk0p3 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p3
Display_Name: sbl2
Storage_Name: sbl2
Backup_Path: /sbl2
Backup_Name: sbl2
Backup_Display_Name: sbl2
Storage_Path: /sbl2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/sbl3 | /dev/block/mmcblk0p4 | Size: 2MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p4
Display_Name: sbl3
Storage_Name: sbl3
Backup_Path: /sbl3
Backup_Name: sbl3
Backup_Display_Name: sbl3
Storage_Path: /sbl3
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/rpm | /dev/block/mmcblk0p6 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p6
Display_Name: rpm
Storage_Name: rpm
Backup_Path: /rpm
Backup_Name: rpm
Backup_Display_Name: rpm
Storage_Path: /rpm
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/tz | /dev/block/mmcblk0p8 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: tz
Storage_Name: tz
Backup_Path: /tz
Backup_Name: tz
Backup_Display_Name: tz
Storage_Path: /tz
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/modem_st1 | /dev/block/mmcblk0p10 | Size: 3MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p10
Display_Name: modem_st1
Storage_Name: modem_st1
Backup_Path: /modem_st1
Backup_Name: modem_st1
Backup_Display_Name: modem_st1
Storage_Path: /modem_st1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/modem_st2 | /dev/block/mmcblk0p11 | Size: 3MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p11
Display_Name: modem_st2
Storage_Name: modem_st2
Backup_Path: /modem_st2
Backup_Name: modem_st2
Backup_Display_Name: modem_st2
Storage_Path: /modem_st2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/aboot | /dev/block/mmcblk0p5 | Size: 0MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p5
Display_Name: aboot
Storage_Name: aboot
Backup_Path: /aboot
Backup_Name: aboot
Backup_Display_Name: aboot
Storage_Path: /aboot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p7 | Size: 24MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p7
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p23 | Size: 2113MB Used: 1727MB Free: 386MB Backup Size: 1727MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p23
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p36 | Size: 11304MB Used: 0MB Free: 11175MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p36
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p24 | Size: 788MB Used: 15MB Free: 773MB Backup Size: 15MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p27 | Size: 24MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p27
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 1933MB Used: 1778MB Free: 154MB Backup Size: 1778MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: Micro SDcard
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/08faffb79c96eb46'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands: ro.boot.hardware=awifi
ro.boot.emmc=true
ro.boot.serialno=08faffb79c96eb46
ro.boot.baseband=apq
ro.serialno=08faffb79c96eb46
ro.bootmode=unknown
ro.baseband=apq
ro.bootloader=unknown
ro.hardware=awifi
ro.revision=11
ro.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mtp,adb
ro.build.id=JLS36I
ro.build.display.id=cm_v500-eng 4.3.1 JLS36I 256a257cdc test-keys
ro.build.version.incremental=256a257cdc
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3.1
ro.build.date=Tue Dec 31 09:34:19 CST 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=drgravy
ro.build.host=drgravy-i7
ro.build.tags=test-keys
ro.product.model=LG-V500
ro.product.brand=lge
ro.product.name=cm_v500
ro.product.device=v500
ro.product.board=awifi
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=v500
ro.build.description=cm_v500-eng 4.3.1 JLS36I 256a257cdc test-keys
ro.build.fingerprint=lge/cm_v500/v500:4.3.1/JLS36I/256a257cdc:eng/test-keys
ro.build.characteristics=default
ro.cm.device=v500
ro.rommanager.developerid=cyanogenmod
ro.com.google.clientidbase=android-google
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
persist.sys.root_access=1
ro.cm.version=10.2-20131231-UNOFFICIAL-v500
ro.modversion=10.2-20131231-UNOFFICIAL-v500
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.opengles.version=196608
persist.audio.handset.mic.type=digital
persist.audio.dualmic.config=endfire
persist.audio.fluence.voicecall=true
persist.audio.handset.mic=dmic
persist.audio.fluence.mode=endfire
persist.audio.lowlatency.rec=false
af.resampler.quality=4
persist.hwc.mdpcomp.enable=true
drm.service.enabled=true
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
media.aac_51_output_enabled=true
debug.egl.recordable.rgba8888=1
ro.qc.sensors.wl_dis=true
ro.qualcomm.sensors.smd=true
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.sf.lcd_density=480
ro.bt.bdaddr_path=/data/misc/bdaddr
ro.telephony.default_network=9
telephony.lteOnGsmDevice=1
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.r_buffer_cache_size=4
ro.hwui.path_cache_size=24
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=5
ro.hwui.texture_cache_flushrate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.kernel.android.checkjni=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
Running boot script...
/sbin/postrecoveryboot.sh: line 5: can't create /sys/class/leds/button-backlight/brightness: nonexistent directory
/sbin/postrecoveryboot.sh: line 6: can't create /sys/class/leds/R/device/led_blink: nonexistent directory
I:/sbin/postrecoveryboot.sh process ended with ERROR=1
Finished running boot script.
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/TWRP/.twrps'.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/08faffb79c96eb46'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:Switching packages (TWRP)
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log

In over 15 years of R&D testing of STBs and embedded devcies I´ve never seen such a f***ing flawed recovery design.
First of all it should never happen that connection to first stage bootloader is not possible anymore via ADB or (USB)serial. Then all recovery images lack of a real erase function, removing really all data and file rights by zeroing the sectors.
Damn, that bricked device was a real tricky one.
So here my solution for the boot loop (I don´t know if it does work for others but I will not go try this again....)
Install the LG Mobile Tools and start them. There is no need to set to Korea as country as described in some manuals (later more). Now install the offered device drivers if they (or newer drivers) are not already installed on your PC.
Boot into recovery whether it does it on itself, by "adb reboot recovery" or with the hardware key combination.
In recovery mode swipe system, data, cache, dalvik etc. Swipe really EVERYTHING your recovery does allow you to swipe.
In recovery call the boot-to-system function. Some recovery images may now offer to root the device, ignore this.
When the reboot started press both volume keys together and hold them until the download mode is activated (screen will be almost black with a very faded infobanner which signalizes download mode is enabled).
Connect the pad to the PC. The LG Mobile tools will automatically identify the device if connection can be established and show up if a software upgrade is available. Therefore no need to set up before to Korea as country since it does switch itself to the correct settings. If a software upgrade is offered then start it, if it says you have already the newest version then go to option and start a recover/repair update. In case a connection is not established try another USB port. For me it worked for e.g. with an USB3.0 port but it should also work with USB 2.0 ports. In some cases an active USB hub may help since they are powered externally.
Hope this might help others with the same problem.
Some words from me regarding the dyn.Kernel: do not flash it if it is not already confirmed that it will work together with your installed ROM version. I don´t know what really went wrong with it, but in my personal opinion there is a high risk to get this boot loop again which is really hard to break since normal swiping/reflashing did not work anymore on my device and LG recovery and ADB were affected, too.

I just found this thread after I had a similar experience.
In matter of fact the LG mobile tool helped. Since the mobile tool deletes and overrides everything is it easy to recover:
Turn of the device
Start LG Mobile tool (check that LG driver is installed)
Push volume up and down at the same time (not power button)
Plug into USB port
Release volume buttons
Now you can continue with LG Mobile tool
Do want to have the procedure again, took me a long time to get it fixed...
My mistake: Started OTA update with root which brought into situation above. I thought it would be worth to try with only deleting via SuperSu but root is not removed completely...
Gesendet von meinem LG-V500 mit Tapatalk

dummy1001 said:
I just found this thread after I had a similar experience.
In matter of fact the LG mobile tool helped. Since the mobile tool deletes and overrides everything is it easy to recover:
Turn of the device
Start LG Mobile tool (check that LG driver is installed)
Push volume up and down at the same time (not power button)
Plug into USB port
Release volume buttons
Now you can continue with LG Mobile tool
Do want to have the procedure again, took me a long time to get it fixed...
My mistake: Started OTA update with root which brought into situation above. I thought it would be worth to try with only deleting via SuperSu but root is not removed completely...
Gesendet von meinem LG-V500 mit Tapatalk
Click to expand...
Click to collapse
Thank you! This worked beautifully for me. I, too, took the OTA with root and got stuck in the TWRP boot loop. Was hopeful of a successful install even if losing root because of other's saying that they did without unrooting first. Lesson learned.

Thanks, you saved me. Power off GPad and after downloading driver press vol up and down at the same time. choose recovery from options in LG mobile support tool.

thanks
dummy1001 said:
I just found this thread after I had a similar experience.
In matter of fact the LG mobile tool helped. Since the mobile tool deletes and overrides everything is it easy to recover:
Turn of the device
Start LG Mobile tool (check that LG driver is installed)
Push volume up and down at the same time (not power button)
Plug into USB port
Release volume buttons
Now you can continue with LG Mobile tool
Do want to have the procedure again, took me a long time to get it fixed...
My mistake: Started OTA update with root which brought into situation above. I thought it would be worth to try with only deleting via SuperSu but root is not removed completely...
Gesendet von meinem LG-V500 mit Tapatalk
Click to expand...
Click to collapse
i registered the forum just for thank you. thank you my friend

Related

Help With Flashable zip

hey guys I am busy writing a script to create a flashable zip acording to the selections made.
basically it is a GUI for windows. you select apps to remove and what to replace and it builds a zip accordingly.
I am having a problem with getting the zip to flash.
attached it the program and the flashable zip.
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.7.1.0 on Mon Sep 22 09:22:34 2014
I:Internal path defined: '/data/media'
I:External path defined: '/external_sd'
I:Mount: Unable to find partition for path '/data'
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/platform/usb_mass_storage/lun0/file' does not exist, USB storage mode disabled
TW_INCLUDE_INJECTTWRP := true
I:Found brightness file at '/sys/devices/virtual/backlight/panel/brightness'
Starting the UI...Pixel format: 1280x800 @ 32bpp
Pixel format: BGRA_8888
Not using qualcomm overlay, 'psbfb'
framebuffer: fd 4 (1280 x 800)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/config'
I:Created '/config' folder.
I:Processing '/cache'
I:Processing '/system'
I:Processing '/data'
I:Created '/sdcard' folder.
I:mount '/data/media' '/sdcard' process ended with RC=0
I:mount '/data/media/0' '/sdcard' process ended with RC=0
I:Processing '/recovery'
I:Processing '/boot'
I:Processing '/external_sd'
I:Created '/external_sd' folder.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/4300ada1bae79000'
I:Settings storage is '/data/media/0'
Updating partition details...
I:Data backup size is 1192MB, free: 8685MB.
I:Unmounting main partitions...
Partition Logs:
/config | /dev/block/mmcblk0p3 | Size: 15MB Used: 4MB Free: 11MB Backup Size: 4MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p3
Display_Name: config
Storage_Name: config
Backup_Path: /config
Backup_Name: config
Backup_Display_Name: config
Storage_Path: /config
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p6 | Size: 344MB Used: 6MB Free: 338MB Backup Size: 6MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p6
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mmcblk0p8 | Size: 2322MB Used: 1843MB Free: 479MB Backup Size: 1843MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p9 | Size: 26418MB Used: 1192MB Free: 8685MB Backup Size: 1192MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p9
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p11 | Size: 20MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p11
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p10 | Size: 20MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p10
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 3773MB Used: 674MB Free: 3098MB Backup Size: 674MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: external_sd
Storage_Name: external_sd
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: external_sd
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/0/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:PageSet::CheckInclude loading filename: ''
I:Loading included resources...
I:Loading included variables...
I:Loading mouse cursor...
I:Loading included pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page reboot
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page Vibrate
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands:
g=€
g=€
g=€
g=€
ro.boot.bootmedia=sdcard
ro.boot.hardware=santos103g
ro.boot.debug_level=0x4f4c
ro.boot.revision=8
ro.boot.emmc_checksum=3
ro.boot.bootloader=P5200XXUANC1
ro.boot.serialno=4300ada1bae79000
ro.serialno=4300ada1bae79000
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=P5200XXUANC1
ro.debug_level=0x4f4c
ro.carrier=unknown
ro.revision=8
ro.hardware=santos103g
ro.factorytest=0
ro.adb.secure=0
ro.secure=0
ro.debugabble=1
ro.allow.mock.location=0
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=KTU84Q
ro.build.display.id=cm_santos10wifi-userdebug 4.4.4 KTU84Q e5900efb45 test-keys
ro.build.version.incremental=e5900efb45
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.4
ro.build.date=Wed Aug 6 17:45:55 EDT 2014
ro.build.date.utc=0
ro.build.type=userdebug
ro.build.user=root
ro.build.host=kali
ro.build.tags=test-keys
ro.product.brand=SGT3_Intel
ro.product.name=cm_santos10wifi
ro.product.board=santos10wifi
ro.product.cpu.abi=x86
ro.product.cpu.abi2=x86
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=clovertrail
ro.build.product=santos10wifi
ro.product.model=GT-P5210
ro.product.device=santos10wifi
ro.build.description=cm_santos10wifi-userdebug 4.4.4 KTU84Q e5900efb45 test-keys
ro.build.fingerprint=SGT3_Intel/cm_santos10wifi/santos10wifi:4.4.4/KTU84Q/e5900efb45:userdebug/test-keys
ro.build.characteristics=tablet
ro.cm.device=santos10wifi
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ril.OTPAuth=true
ro.lcd_brightness=118
ro.sf.lcd_density=160
panel.physicalWidthmm=217
panel.physicalHeightmm=136
ro.opengles.version=131072
ro.lcd_min_brightness=10
ro.mds.enable=true
ro.kernel.qemu=0
ro.rommanager.developerid=cyanogenmod
ro.com.google.clientidbase=android-google
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
persist.sys.dun.override=0
persist.sys.root_access=1
ro.cm.version=11-20140806-UNOFFICIAL-santos10wifi
ro.cm.releasetype=UNOFFICIAL
ro.modversion=11-20140806-UNOFFICIAL-santos10wifi
ro.cmlegal.url=http://www.cyanogenmod.org/docs/privacy
persist.sys.recovery_update=false
ro.cm.display.version=11-20140806-UNOFFICIAL-santos10wifi
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=384m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
mobiledata.interfaces=rmnet0,pdp0,wlan0,gprs,ppp0
ro.telephony.call_ring.multiple=false
ro.telephony.call_ring.delay=3000
ro.boot.selinux=disabled
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.lockprof.threshold=500
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.healthd=running
I:Backing up TWRP ramdisk...
-- InjectTWRP Recovery Ramdisk Injection Tool for Samsung devices. --
-- by Dees_Troy and Team Win --
-- [url]http://teamw.in[/url] --
-- Bringing some win to Samsung! --
-- This tool comes with no warranties whatsoever! --
-- Use at your own risk and always keep a backup! --
Version 0.2 beta
Dumping boot image...
This is not a properly formatted Samsung boot image!
Failed
I:injecttwrp --backup /tmp/backup_recovery_ramdisk.img bd=/dev/block/mmcblk0p10 process ended with ERROR=1
I:Backup of TWRP ramdisk done.
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/4300ada1bae79000'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:Switching packages (TWRP)
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Roms/SlimSammy.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
line 26 col 42: syntax error, unexpected BAD
1 parse errors
E:Error executing updater binary in zip '/sdcard/Roms/SlimSammy.zip'
Error flashing zip '/sdcard/Roms/SlimSammy.zip'
Injecting TWRP into boot image...
-- InjectTWRP Recovery Ramdisk Injection Tool for Samsung devices. --
-- by Dees_Troy and Team Win --
-- [url]http://teamw.in[/url] --
-- Bringing some win to Samsung! --
-- This tool comes with no warranties whatsoever! --
-- Use at your own risk and always keep a backup! --
Version 0.2 beta
Dumping boot image...
This is not a properly formatted Samsung boot image!
Failed
I:injecttwrp --dump /tmp/backup_recovery_ramdisk.img /tmp/injected_boot.img --flash bd=/dev/block/mmcblk0p10 process ended with ERROR=1
TWRP injection complete.
Updating partition details...
I:Data backup size is 1192MB, free: 8685MB.
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/sdcard/Roms/SlimSammy.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
line 26 col 42: syntax error, unexpected BAD
1 parse errors
E:Error executing updater binary in zip '/sdcard/Roms/SlimSammy.zip'
Error flashing zip '/sdcard/Roms/SlimSammy.zip'
Injecting TWRP into boot image...
-- InjectTWRP Recovery Ramdisk Injection Tool for Samsung devices. --
-- by Dees_Troy and Team Win --
-- [url]http://teamw.in[/url] --
-- Bringing some win to Samsung! --
-- This tool comes with no warranties whatsoever! --
-- Use at your own risk and always keep a backup! --
Version 0.2 beta
Dumping boot image...
This is not a properly formatted Samsung boot image!
Failed
I:injecttwrp --dump /tmp/backup_recovery_ramdisk.img /tmp/injected_boot.img --flash bd=/dev/block/mmcblk0p10 process ended with ERROR=1
TWRP injection complete.
Updating partition details...
I:Data backup size is 1192MB, free: 8685MB.
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'settings'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log

[Q&A] [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]

Q&A for [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][m8] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
htc one m8 ul_ca
Will this version work on my htc one m8 ul_ca? Attempted root with twrp 2.7.0.2 using the all in one toolkit from Hasoon however the recovery was never properly flashed. the screen stalled at download and did nothing. I rebooted and everything was fine but no idea as to what the problem is.
ShinAkira00 said:
Will this version work on my htc one m8 ul_ca? Attempted root with twrp 2.7.0.2 using the all in one toolkit from Hasoon however the recovery was never properly flashed. the screen stalled at download and did nothing. I rebooted and everything was fine but no idea as to what the problem is.
Click to expand...
Click to collapse
Yes.
xunholyx said:
Yes.
Click to expand...
Click to collapse
Thanks but any ideas why i may be getting this error "FAILED (status read failed (Too many links)" when attempting root?
ShinAkira00 said:
Thanks but any ideas why i may be getting this error "FAILED (status read failed (Too many links)" when attempting root?
Click to expand...
Click to collapse
Go here.
This is the way I did root on my M8.
Getting an error when trying to do an ordinary nandroid backup to my external 64gb sdcard.
Unable to create folder /sdcard2/TWRP/BACKUPS
The external sd card mounts just fine - in fact I created the folder myself to just see what would happen and still got the error. Any ideas?
I can't able to download Twrp 2.8.1.0 my download is not connecting at 99.9%
It will be helpful if anyone give me alternative link please!
Thank you
2.8.1 E:Resource type (font) failed to load....
hi ther
so, long story short. i updated my firmware using the methods from http://forum.xda-developers.com/htc-...uu-m8-t2813792 to 3.28.401.9 and it was succesful. flashed twrp 2.8.1 and then installed latest android revolution rom via twrp which says its succesful but i'm getting a "E:Resource type (font) failed to load error 3 times in a row and my rom won't boot. i'm thinking they are related maybe? below isthe contents of the recovery log file. please let me know what i need to do here.
thanks
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.8.1.0 on Wed Jan 1 08:43:34 2014
TW_INCLUDE_DUMLOCK := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/msm_dwc3/f9200000.dwc3/gadget/lun0/file'
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
Starting the UI...Pixel format: 1080x1920 @ 32bpp
Pixel format: RGBX_8888
Not using qualcomm overlay, 'mdssfb_90000'
framebuffer: fd 4 (1080 x 1920)
minui: /sys/board_properties/virtualkeys.synaptics-rmi-touchscreen is 5 % 6
=> Linking mtab
=> Processing recovery.fstab
Irocessing '/misc'
Irocessing '/boot'
Irocessing '/cache'
Irocessing '/system'
Irocessing '/data'
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:mount '/data/media' '/sdcard' process ended with RC=0
Irocessing '/devlog'
I:Created '/devlog' folder.
Irocessing '/external_sd'
I:Created '/external_sd' folder.
Irocessing '/sd-ext'
I:Created '/sd-ext' folder.
Irocessing '/usb_otg'
I:Created '/usb_otg' folder.
I:Created '/and-sec' folder.
I:Creating Android Secure: /external_sd/.android_secure
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
WARN: volume was not unmounted cleanly.
I:mount '/external_sd/.android_secure' '/and-sec' process ended with RC=0
I:Backup folder set to '/data/media/TWRP/BACKUPS/SH442WM10676'
I:Settings storage is '/data/media'
Updating partition details...
Iata backup size is 205MB, free: 25198MB.
I:Unable to mount '/sd-ext'
I:Actual block device: '', current file system: 'ext4'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/misc | /dev/block/mmcblk0p24 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/boot | /dev/block/mmcblk0p42 | Size: 16MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p42
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/cache | /dev/block/mmcblk0p46 | Size: 678MB Used: 10MB Free: 667MB Backup Size: 10MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p46
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mmcblk0p45 | Size: 1020MB Used: 1020MB Free: 0MB Backup Size: 1020MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p45
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p47 | Size: 25532MB Used: 205MB Free: 25198MB Backup Size: 205MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p47
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/devlog | /dev/block/mmcblk0p39 | Size: 29MB Used: 25MB Free: 4MB Backup Size: 25MB
Flags: Can_Be_Mounted Can_Be_Wiped IsPresent
Primary_Block_Device: /dev/block/mmcblk0p39
Display_Name: devlog
Storage_Name: devlog
Backup_Path: /devlog
Backup_Name: devlog
Backup_Display_Name: devlog
Storage_Path: /devlog
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/external_sd | /dev/block/mmcblk1p1 | Size: 60890MB Used: 21138MB Free: 39752MB Backup Size: 480MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI Removable IsPresent Has_Android_Secure Is_Storage
Symlink_Path: /external_sd/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /external_sd
Current_File_System: exfat
Fstab_File_System: vfat
Backup_Method: files
/sd-ext | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI Removable Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mmcblk1p2
Display_Name: SD-Ext
Storage_Name: SD-Ext
Backup_Path: /sd-ext
Backup_Name: sd-ext
Backup_Display_Name: SD-Ext
Storage_Path: /sd-ext
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/usb_otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb_otg
Backup_Name: usb_otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb_otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
E:Resource type (font) failed to load
E:Resource type (font) failed to load
E:Resource type (font) failed to load
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/SH442WM10676'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page Vibrate
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
Startup Commands:
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.com.android.wifi-watchlist=GoogleGuest
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.boot.dq=PASS
ro.boot.lb=1
ro.boot.cid=11111111
ro.boot.mid=0P6B17000
ro.boot.emmc=true
ro.boot.mode=recovery
ro.boot.podt=0x3E8
ro.boot.ddrmid=(0x1)
ro.boot.carrier=ALL
ro.boot.keycaps=qwerty
ro.boot.baseband=1.22.21331147A1.29G
ro.boot.hardware=qcom
ro.boot.pagesize=2048
ro.boot.rom_type=NORMAL
ro.boot.serialno=SH442WM10676
ro.boot.devicerev=5
ro.boot.bootloader=3.19.0.0000
ro.boot.efuse_info=FL
ro.boot.batt_poweron=good_battery
ro.emmc=0
ro.hwui.path_cache_size=24
ro.hwui.layer_cache_size=32
ro.hwui.texture_cache_size=48
ro.hwui.gradient_cache_size=1
ro.hwui.r_buffer_cache_size=4
ro.hwui.drop_shadow_cache_size=5
ro.hwui.text_large_cache_width=2048
ro.hwui.text_small_cache_width=1024
ro.hwui.text_large_cache_height=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.texture_cache_flushrate=0.5
ro.omni.device=m8
ro.omni.version=4.4.4-20141023-m8-HOMEMADE
ro.twrp.boot=1
ro.twrp.version=2.8.1.0
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8974
ro.build.id=KTU84P
ro.build.date=Thu Oct 23 03:17:55 UTC 2014
ro.build.date.utc=0
ro.build.host=ded1.ktechnology.net
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=dees_troy
ro.build.display.id=omni_m8-eng 4.4.4 KTU84P 4ef4c299f5 test-keys
ro.build.product=m8
ro.build.version.sdk=19
ro.build.version.release=4.4.4
ro.build.version.codename=REL
ro.build.version.incremental=4ef4c299f5
ro.build.description=1.54.401.5 CL325784 release-keys
ro.build.fingerprint=htc/htc_europe/htc_m8:4.4.2/KOT49H/325784.5:user/release-keys
ro.build.characteristics=default
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Argon.ogg
ro.config.notification_sound=pixiedust.ogg
ro.kernel.android.checkjni=1
ro.secure=0
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.board=MSM8974
ro.product.brand=htc
ro.product.model=HTC One_M8
ro.product.device=m8
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=htc
ro.baseband=1.22.21331147A1.29G
ro.bootmode=recovery
ro.hardware=qcom
ro.revision=0
ro.serialno=SH442WM10676
ro.9kramdump=0
ro.telephony.default_network=9
ro.bootloader=3.19.0.0000
ro.debuggable=1
ro.modversion=OmniROM-4.4.4-20141023-m8-HOMEMADE
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
net.bt.name=Android
net.change=net.bt.name
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.chargeled=running
init.svc.choice_fn=stopped
twrp.crash_counter=0
dalvik.vm.heapsize=512m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.root_access=1
service.adb.root=1
keyguard.no_require_sim=true
telephony.lteOnGsmDevice=1
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Loading settings from '/data/media/TWRP/.twrps'.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/SH442WM10676'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:TWFunc::Fixup_Time: Pre-fix date and time: 2014-01-01--02-43-36
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
I:Cannot find file /sys/class/android_usb/android0/idVendor
I:Cannot find file /sys/class/android_usb/android0/idProduct
twrp addStorage /data/media, mtpstorageid: 65537
twrp addStorage /external_sd, mtpstorageid: 65538
Starting MTP
MTP Enabled
created new mtpserver object
adding internal storage
I:Switching packages (TWRP)
MtpStorage id: 65537 path: /data/media
I:Starting command line thread
E:inotify_add_watch failed: Bad file number
MtpStorage id: 65538 path: /external_sd
MtpServer::run fd: 16
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
Can recovery be flashed via 0p6bimg method? I don't have access to my laptop
muppetmaster916 said:
Can recovery be flashed via 0p6bimg method? I don't have access to my laptop
Click to expand...
Click to collapse
If it's a zip file, yes.
Magnum_Enforcer said:
If it's a zip file, yes.
Click to expand...
Click to collapse
Where would I go about finding a recovery.zip rather than the .img that they typically are.
muppetmaster916 said:
Where would I go about finding a recovery.zip rather than the .img that they typically are.
Click to expand...
Click to collapse
Take a look in the link below. Just fyi, using Flashify from the Play store works, too. It allows flashing of zip & img files.
http://themikmik.com/showthread.php...OM-TWRP-Recovery-v2-8-3-standard-TWRP-2-8-3-0
TWRP 2.8.4.0 won't boot.
I've tried to install 2.8.4.0 about a dozen times. Checked the md5. When booting it always stops at the white HTC boot screen. Same with 2.8.3.0.
The latest version I can get to install and actually boot is 2.8.1.0.
Any ideas?
Thanks,
Mike
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.21331931.LA11G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c3d94491
hbootpreupdate: 11
gencheckpt: 0
jmb6420 said:
I've tried to install 2.8.4.0 about a dozen times. Checked the md5. When booting it always stops at the white HTC boot screen. Same with 2.8.3.0.
The latest version I can get to install and actually boot is 2.8.1.0.
Any ideas?
Thanks,
Mike
version: 0.5
version-bootloader: 3.16.0.0000
version-baseband: 1.16.21331931.LA11G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno:
imei:
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: 11111111
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c3d94491
hbootpreupdate: 11
gencheckpt: 0
Click to expand...
Click to collapse
You need to update your firmware. Your bootloader is too old for the newer recovery version.
xunholyx said:
You need to update your firmware. Your bootloader is too old for the newer recovery version.
Click to expand...
Click to collapse
Thank you. I thought I had to install 2.8.4.0 PRIOR to updating my firmware. Makes sense now.
TWRP Issue
I was wondering if anyone could help me out with this problem I have been having. I recently bought an HTC One M8 from AT&T. I unlocked the boot loader through a Sunshine license I already owned. Anytime I flash TWRP after 2.8.1.0, the phone hangs on the HTC screen with the purple texts that says, "Entering Recovery....". I have tried everything I can think of. Any help would be greatly appreciated! Thank you in advance!
EDIT: I apologize, I believe I may have the old bootloader firmware issue, I will try to update the firmware and see if that fixes my issue.
slimkat and carbon 4.4.4 r2 problem gt-p6200 plus
Plus GT-P6200
a bluetooth connection is good but breaking speech
my bluetooth Plantronics | Voyager Legend
one bass and one-off does not work
bluetooth breaks and sometimes we need to reboot.
but it will not restart unless gsm
TWRP backups restoring, but lots of errors in apps.
OK... I'm at a loss. I've Googled and I've read this entire thread and can't find a solution.
I have a T-mobile HTC One M8 and here are the steps I've taken.
Using fastboot, I flash the t-mobile stock recovery onto the phone, lock the bootloader, then boot into fastboot and run the latest T-mobile RUU to completely restore the phone to stock.
I boot, run through the setup and then shutdown the phone. I boot into fastboot, unlock the bootloader (using fastboot) and flash the 2.8.5.0 TWRP recovery onto the device. After I do this, I reboot the phone and it goes through all of the setup steps again, as if I hadn't done it the first time. After running through setup, I shut down the phone and boot into recovery.
I perform a backup of system, data and boot and have it saved to the SD card. After it complete's successfully, I reboot the device and confirm that everything is working correctly.
Shutdown, boot to recovery and I then use the default wipe. Then I restore the backup I just made of the stock ROM. After the restore completes successfully, I reboot the device and after it boots up, I get a "Unfortunately, System UI has stopped working." and after tapping OK, nothing works. If I click the app drawer, it comes up but the dock at the bottom disappears and doesn't come back. Apps don't work.
I've also tried it with the Viper One ROM. Same steps as above, except I install the ROM, boot into the ROM, complete setup, and then back it up from recovery. After restoring I get various errors and apps are unable to function correctly.
Any ideas?
Thanks in advance for any help!
After installation of twrp-2.8.6.0-m8.img, I am not able to enter the recovery any more
Tested with installation through TWRP (v2.8.5) and via fastboot. This issue is reproducible.
Anyone experiencing the same issue?
MarioBrosN5 said:
After installation of twrp-2.8.6.0-m8.img, I am not able to enter the recovery any more
Tested with installation through TWRP (v2.8.5) and via fastboot. This issue is reproducible.
Anyone experiencing the same issue?
Click to expand...
Click to collapse
Any kind of response will be really appreciated. If it is necessary I can provide any kind of log files.
Thx in advance for your assistance.

[Root] BQ Aquaris X5 Plus (gohan)

Hi,
this tutorial is an translation from german. Al credits to x.wolverine.x from Android Hilfe.
prerequisite:
1.) activate developer options
2.) enable Bootloader-Unlock
3.) download and install ADB und fastboot (minimal adb & fastboot)
4.) latest usb driver (Support - Aquaris X5 Plus <== Drivers, Drivers & Tools)
5.) download TWRP BQ Aquaris X5 Plus (gohan)
6.) download SuperSu
Let's do it (You do everything at your own risk!):
1.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey -> device restarts to white screen fastboot mode
2.) connect to your pc via usb cable
3.) start command shell and check for phone
"fastboot devices"
4.) do the unlocking -> Attention: unlocking the bootloader does a full-wipe!!!
"fastboot oem unlock-go"
5.) boot TWRP
"fastboot boot twrp-3.0.2-0-gohan.img"
alternative flash permanent
"fastboot flash recovery twrp-3.0.2-0-gohan.img​" <- I did this finally, but for root only temp boot is enough.
6.) flash SuperSu with TWRP
Bye
Ping_2000
Hi, i tried that and actually all these steps seem to go well. But after that i kind of bricked my phone.
Googling for hours brought it back via sudo fastboot flash recovery recovery.img
Im in desperate need of working firmware now ))
download lineageos org/paella >> is only for x5 not x5 plus
BQ seems not to have release a firmware online, the flashtool does not work as it complains that the phone is locked,
sudo fastboot oem unlock-go
...
OKAY [ 0.000s]
finished. total time: 0.000s
but no effect (((
fastboot oem device-info
sudo fastboot oem device-info
...
(bootloader) Device tampered: false
(bootloader) Device unlocked: true
(bootloader) Device critical unlocked: false
(bootloader) Charger screen enabled: true
(bootloader) Display panel:
OKAY [ 0.005s]
finished. total time: 0.005s
the firmware at shenron bq com/ otas/ 2016/SM...8976_gohan__user_-_20170109-134157_update.zip does not get installed, it gives an error
so does storage googleapis com /otas...BQ/1.6.0_20161229-1655-gohan-user-1047-FW zip
---------- Post added at 07:21 PM ---------- Previous post was at 06:50 PM ----------
Starting TWRP 3.0.2-1-f3c1b2f5-dirty on Thu Jan 1 05:15:59 1970
(pid 339)
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/devices/platform/msm_hsusb/gadget/lun0/file'
TW_INCLUDE_CRYPTO := true
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:Got max brightness 255 from '/sys/class/leds/lcd-backlight/max_brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 128
I:LANG: en
Starting the UI...
Overlay graphics may work (mdssfb_90000), but not enabled. Use TW_TARGET_USES_QCOM_BSP := true to enable.
setting DRM_FORMAT_RGBX8888 and GGL_PIXEL_FORMAT_RGBX_8888
cannot find/open a drm device: No such file or directory
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 0 .length = 8
vi.green.offset = 8 .length = 8
vi.blue.offset = 16 .length = 8
setting GGL_PIXEL_FORMAT_RGBA_8888
double buffered
framebuffer: 0 (1080 x 1920)
Using fbdev graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 128
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
IageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
blacklisting hbtp_vm input device
=> Linking mtab
Moving /etc/twrp.fstab -> /etc/recovery.fstab
=> Processing recovery.fstab
Irocessing '/cache'
Irocessing '/system'
Irocessing '/system_image'
Irocessing '/data'
Irocessing '/boot'
Irocessing '/recovery'
Irocessing '/misc'
Irocessing '/external_sd'
I:Created '/external_sd' folder.
Irocessing '/usb-otg'
I:Created '/usb-otg' folder.
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:Setting up '/data' as data/media emulated storage.
I:Recreating /data/media folder.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/TWRP/BACKUPS/XH035792'
I:Settings storage is '/data/media'
Iecrypt adopted storage starting
IageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
Updating partition details...
Failed to mount '/system' (Invalid argument)
I:Actual block device: '/dev/block/mmcblk0p24', current file system: 'ext4'
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Unmounting main partitions...
Partition Logs:
/cache | /dev/block/mmcblk0p25 | Size: 247MB Used: 0MB Free: 247MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p25
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mmcblk0p24 | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system_image | /dev/block/mmcblk0p24 | Size: 2560MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p24
Display_Name: System Image
Storage_Name: system_image
Backup_Path: /system_image
Backup_Name: system_image
Backup_Display_Name: System Image
Storage_Path: /system_image
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/data | /dev/block/mmcblk0p46 | Size: 6629MB Used: 0MB Free: 6614MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p46
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
MTP_Storage_ID: 65537
/boot | /dev/block/mmcblk0p21 | Size: 64MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p21
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/recovery | /dev/block/mmcblk0p22 | Size: 64MB
Flags: IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p22
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/misc | /dev/block/mmcblk0p27 | Size: 1MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p27
Display_Name: misc
Storage_Name: misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: misc
Storage_Path: /misc
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | /dev/block/mmcblk1p1 | Size: 59672MB Used: 1584MB Free: 58087MB Backup Size: 1584MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: External SD
Storage_Name: External SD
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: External SD
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65538
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB OTG
Storage_Name: USB OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65539
I:Loading package: TWRP (/data/media/TWRP/theme/ui.zip)
I:Loading zip theme
I:Loading package: TWRP (/twres/ui.xml)
I:Load XML directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/uk.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/tr.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sv.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sk.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/ru.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/pt_BR.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/pl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/nl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/it.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/hu.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/fr.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/es.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/el.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/de.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/cz.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
IageManager::LoadFileToBuffer loading filename: '/twres/ui.xml' directly
I:Checking resolution...
I:Loading resources...
I:Failed to load image from indeterminate013, error -1
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Including file: /twres/portrait.xml...
IageManager::LoadFileToBuffer loading filename: '/twres/portrait.xml' directly
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page flash_sleep_and_reboot
I:Loading page flashimage_confirm
I:Loading page clear_vars
I:Loading page reboot_system_routine
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backup_options
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/TWRP/BACKUPS/XH035792'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page system_readonly_check
I:Loading page reboot
I:Loading page system_readonly
I:Loading page settings
I:Loading page settings_timezone
I:Loading page settings_screen
I:Loading page settings_vibration
I:Loading page settings_language
I:Loading page advanced
I:Loading page partsdcardsel
I:Loading page partsdcardcheck
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageraction
I:Loading page decrypt
I:Loading page decrypt_pattern
I:Loading page trydecrypt
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page fixcontexts
I:Loading page installsu
I:Loading page slideout
I:Loading page select_storage
I:Loading page select_language
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
Startup Commands:
ro.boot.emmc=true
ro.boot.console=ttyHSL0
ro.boot.baseband=msm
ro.boot.hardware=qcom
ro.boot.serialno=XH035792
ro.boot.keymaster=1
ro.boot.bootdevice=7824900.sdhci
ro.boot.veritymode=enforcing
ro.boot.verifiedbootstate=orange
ro.omni.device=gohan
ro.twrp.boot=1
ro.twrp.version=3.0.2-1
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8952
ro.build.id=MOB30M
ro.build.date=Tue Dec 6 11:41:07 EST 2016
ro.build.date.utc=0
ro.build.host=build
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=jenkins
ro.build.flavor=omni_gohan-eng
ro.build.display.id=omni_gohan-eng 6.0.1 MOB30M 2 test-keys
ro.build.product=Aquaris_X5_Plus
ro.build.version.sdk=23
ro.build.version.base_os=
ro.build.version.release=6.0.1
ro.build.version.codename=REL
ro.build.version.incremental=2
ro.build.version.preview_sdk=0
ro.build.version.all_codenames=REL
ro.build.version.security_patch=2016-06-01
ro.build.description=omni_gohan-eng 6.0.1 MOB30M 2 test-keys
ro.build.fingerprint=bq/omni_gohan/gohan:6.0.1/MOB30M/2:eng/test-keys
ro.build.characteristics=default
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.alarm_alert=Argon.ogg
ro.config.notification_sound=pixiedust.ogg
ro.dalvik.vm.native.bridge=0
ro.kernel.android.checkjni=1
ro.secure=0
ro.zygote=zygote32
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.name=Aquaris_X5_Plus
ro.product.board=msm8952
ro.product.brand=bq
ro.product.model=Aquaris X5 Plus
ro.product.device=Aquaris_X5_Plus
ro.product.locale=en-US
ro.product.manufacturer=bq
ro.baseband=msm
ro.bootmode=unknown
ro.hardware=qcom
ro.revision=0
ro.serialno=XH035792
ro.bootimage.build.date=Tue Dec 6 11:42:14 EST 2016
ro.bootimage.build.date.utc=1481042534
ro.bootimage.build.fingerprint=bq/omni_gohan/gohan:6.0.1/MOB30M/2:eng/test-keys
ro.bootloader=unknown
ro.debuggable=1
net.bt.name=Android
net.change=net.bt.name
sys.usb.ffs.ready=1
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.set_permissive=stopped
twrp.crash_counter=0
twrp.action_complete=0
debug.atrace.tags.enableflags=0
dalvik.vm.isa.arm.variant=cortex-a7
dalvik.vm.isa.arm.features=default
dalvik.vm.usejit=true
dalvik.vm.lockprof.threshold=500
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.dex2oat-filter=verify-at-runtime
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvik.vm.image-dex2oat-filter=verify-at-runtime
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib.2=libart
service.adb.root=1
I:Copying file /cache/recovery/log to /cache/recovery/last_log
tw_get_context got selinux context: ubject_r:system_data_file:s0
I:Got default contexts and file mode for storage files.
I:Attempt to load settings from settings file...
I:InfoManager file '/data/media/TWRP/.twrps' not found.
I:Backup folder set to '/data/media/TWRP/BACKUPS/XH035792'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
I:TWFunc::Set_Brightness: Setting brightness control to 128
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:Translating partition display names
I:Backup folder set to '/data/media/TWRP/BACKUPS/XH035792'
I:TWFunc::Fixup_Time: Pre-fix date and time: 1970-01-01--00-16-00
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
Starting MTP
I:sending message to add 65537 '/data/media' 'Internal Storage'
I:Message sent, add storage ID: 65537
I:sending message to add 65538 '/external_sd' 'Micro SDCard'
I:Message sent, add storage ID: 65538
MTP Enabled
I:Switching packages (TWRP)
I:Set page: 'system_readonly'
created new mtpserver object
MtpServer::run fd: 20
mtppipe add storage 65537 '/data/media'
MtpStorage id: 65537 path: /data/media
mtppipe add storage 65538 '/external_sd'
MtpStorage id: 65538 path: /external_sd
I:Is_Mounted: Unable to find partition for path '/vendor'
Iperation_start: 'Toggle System Mount'
Iperation_end - status=1
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'wipe'
I:Set page: 'advancedwipe'
I:Set page: 'action_page'
Iperation_start: 'Format'
I:wipe list '/cache;/system;/data;'
I:wipe_path '/cache'
Formatting Cache using make_ext4fs...
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16384 inodes and 2089/65536 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
I:Recreating /cache/recovery folder.
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:wipe_path '/system'
Formatting System using make_ext4fs...
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label:
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 11/163840 inodes and 21489/655360 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
I:wipe_path '/data'
Wiping data without wiping /data/media ...
I:skipped '/data/lost+found'
I:skipped '/data/media'
Done.
I:sending message to add 65537 '/data/media' 'Internal Storage'
I:Message sent, add storage ID: 65537
Updating partition details...
mtppipe add storage 65537 '/data/media'
MtpStorage id: 65537 path: /data/media
E:MtpServer::addStorage Storage for storage ID 65537 already exists.
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'action_complete'
Iperation_end - status=0
I:Set page: 'clear_vars'
I:Set page: 'advancedwipe'
I:Set page: 'wipe'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set overlay: 'select_storage'
I:Backup folder set to '/external_sd/TWRP/BACKUPS/XH035792'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing zip file '/external_sd/lineage-14.1-20170223-nightly-paella-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
script aborted: E3004: This package is for device: piccolometal,picmt,paella,Aquaris_X5; this device is Aquaris_X5_Plus.
E3004: This package is for device: piccolometal,picmt,paella,Aquaris_X5; this device is Aquaris_X5_Plus.
E:unknown command [log]
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '/external_sd/lineage-14.1-20170223-nightly-paella-signed.zip'
Updating partition details...
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
Iperation_start: 'Flashing'
Installing zip file '/external_sd/1.6.0_20161229-1655-gohan-user-1047-FW.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Could not find 'META-INF/com/google/android/update-binary' in the zip file.
Error installing zip file '/external_sd/1.6.0_20161229-1655-gohan-user-1047-FW.zip'
Updating partition details...
Iata backup size is 0MB, free: 6614MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
Iperation_end - status=1
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
solved (partly) !!!!!
I can boot again and have a partly working phone with cyanogen.
Thanks to this zip file cm-13.0-20161206-UNOFFICIAL-gohan
martexx said:
BQ seems not to have release a firmware online, the flashtool does not work as it complains that the phone is locked,
Click to expand...
Click to collapse
No, they have placed here
https :// www bq.com/en/support/aquaris-x5-plus/support-sheet
martexx said:
solved (partly) !!!!!
I can boot again and have a partly working phone with cyanogen.
Thanks to this zip file cm-13.0-20161206-UNOFFICIAL-gohan
Click to expand...
Click to collapse
Hi,
if still needed, try this:
1.) Download current firmeware (1.6.0) from bq.
2.) unzip the file
3.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey -> device restarts to white screen fastboot mode
4.) connect your phone with your computer (USB-Cabel)
5.) start "cmd" (on windows)
6.) navigate to unzip location (for example: C:\dev\BQ\Aquaris_X5_Plus-bq-1.6.0_20161229-1655-gohan-user-1047-FW)
7.) run "8976_fastboot_all_images.bat" <-this will flash the complete firmeware, complete reset (DATA / RECOVERY - ALL!!)
Bye Ping_2000
hello there,
I want to flash a new rom to this device but i can't start the phone anymore because it's asking for an old google account that was log into it.In this case i can't acces the phone and activate developer mode and unlock bootloader option.If i try to unlock bootloader with BQ Firmware update tools it say me to add a file to unlock bootloader,but i don't have such a file.
Can you upload a file to unlock bootloader or It's any other way to disable bootloader with fastboot command??
cristinelxxx said:
hello there,
I want to flash a new rom to this device but i can't start the phone anymore because it's asking for an old google account that was log into it.In this case i can't acces the phone and activate developer mode and unlock bootloader option.If i try to unlock bootloader with BQ Firmware update tools it say me to add a file to unlock bootloader,but i don't have such a file.
Can you upload a file to unlock bootloader or It's any other way to disable bootloader with fastboot command??
Click to expand...
Click to collapse
Hi,
1.) flash actual firmeware with BQ-Flashtool
2.) access dev options
3.) unlock bootloader
Bye Ping_2000
Ping_2000 said:
Hi,
1.) flash actual firmeware with BQ-Flashtool
2.) access dev options
3.) unlock bootloader
Bye Ping_2000
Click to expand...
Click to collapse
I can't install any firmware because it say that device is locked and before flash a new firmware i should unlock it.
cristinelxxx said:
I can't install any firmware because it say that device is locked and before flash a new firmware i should unlock it.
Click to expand...
Click to collapse
In case this didn't work, i don't know any other way. Sorry.
Bye Ping_2000
hello all,
i hae a problem while updating my bq x5 due to low battery its power off and now after charging just stuck at cynogenmod any instruction or tutorial for em?
Root BQ Aquaris X5 Plus, Addition (Tested)
Root BQ Aquaris X5 Plus(Tested)
1. activate developer options on the device
2. enable Bootloader-Unlock on the device
3. download and install ADB und fastboot on: https://forum.xda-developers.com/showthread.php?t=2317790
4. latest usb driver on your PC on: http://www.bq.com/en/support/aquaris-x5-plus/support-sheet
5. download latest TWRP on: https://dl.twrp.me/gohan/
6. download SuperSu zip file on: https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Steps:
1.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey → device restarts to fastboot mode
2.) connect to your pc via usb cable
3.) start command shell (cmd) in the fastboot instalation folder on your PC and check for the device connection with the command:
"fastboot devices"
4.) do the unlocking
"fastboot oem unlock-go"
„fastboot flashing unlock“
„fastboot flashing unlock_critical“
5.) boot TWRP image file in the command line, showing the pathway to the file:
„.............twrp-3.1.1-0-gohan.img“
6.) Put the SuperSu zip file in the device memory and flash SuperSu zip with TWRP, then restart the device. Done!!!!
---------- Post added at 12:37 AM ---------- Previous post was at 12:34 AM ----------
Root BQ Aquaris X5 Plus(Tested)
1. activate developer options on the device
2. enable Bootloader-Unlock on the device
3. download and install ADB und fastboot on: https://forum.xda-developers.com/showthread.php?t=2317790
4. latest usb driver on your PC on: http://www.bq.com/en/support/aquaris-x5-plus/support-sheet
5. download latest TWRP on: https://dl.twrp.me/gohan/
6. download SuperSu zip file on: https://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
Steps:
1.) boot to fastboot -> shutdown your device -> press on/off + "-" Volumekey → device restarts to fastboot mode
2.) connect to your pc via usb cable
3.) start command shell (cmd) in the fastboot instalation folder on your PC and check for the device connection with the command:
"fastboot devices"
4.) do the unlocking
"fastboot oem unlock-go"
„fastboot flashing unlock“
„fastboot flashing unlock_critical“
5.) boot TWRP image file in the command line, showing the pathway to the file:
„.............twrp-3.1.1-0-gohan.img“
6.) Put the SuperSu zip file in the device memory and flash SuperSu zip with TWRP, then restart the device. Done!!!!

[Critical] Bootloader will only boot into Recovery after fresh install (modded TWRP)

Hi everyone!
I'm facing a weird problem: I installed Resurrection Remix again (7.1.1) (it was my main rom) and TWRP started asking for the encryption key (although it was a pattern). I entered into recovery and did a wipe as the system requested.
Then, I realized that the encryption problem went further and I tried
Code:
fastboot format userdata
After that, the bootloader is able to boot just the TWRP recovery.
Then I tried from this link https://forums.oneplus.net/threads/beta-8-encryption-help.479290/page-2:
Code:
fastboot format userdata
fastboot format cache
fastboot format system
fastboot erase recovery
fastboot erase boot
fastboot reboot
fastboot flash recovery <twrp28>
However, nothing changes.
I also tried to do all wipes, to format the data and system partition as EXT4, to reinstall RRemix 7.1.1 a lot of times, and, again, the system can just boot into recovery.
I saw a lot of user with the same problem, however, there is no solution for this problem yet.
OBS: the phone is booting successfully with the command:
Code:
fastboot boot boot.img
And then, after one manual reboot, the bootloader chooses the recovery again. The phone continues to boot into TWRP only.
The Encryption is gone, but I can only boot using this manual mode discovered by @Sompom
https://forum.xda-developers.com/oneplus-3/help/oneplus-3-bootloader-defaulting-to-t3529130
Could someone please help to fix this boot problem?
If there is any information than I can provide, please, let me know.
Plase, find the logs below:
Recovery LOG
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 3.0.2-1 on Mon May 4 19:23:21 1970
(pid 433)
BOARD_HAS_NO_REAL_SDCARD := true
RECOVERY_SDCARD_ON_DATA := true
I:Lun file '/sys/class/android_usb/android0/f_mass_storage/lun0/file' does not exist, USB storage mode disabled
TW_INCLUDE_CRYPTO := true
I:TW_BRIGHTNESS_PATH := /sys/class/leds/lcd-backlight/brightness
I:Found brightness file at '/sys/class/leds/lcd-backlight/brightness'
I:Got max brightness 255 from '/sys/class/leds/lcd-backlight/max_brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 80
I:LANG: en
Starting the UI...Overlay graphics may work (mdssfb_90000), but not enabled. Use TW_TARGET_USES_QCOM_BSP := true to enable.
setting DRM_FORMAT_RGB565 and GGL_PIXEL_FORMAT_RGB_565
cannot find/open a drm device: No such file or directory
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 0 .length = 8
vi.green.offset = 8 .length = 8
vi.blue.offset = 16 .length = 8
setting GGL_PIXEL_FORMAT_RGBA_8888
double buffered
framebuffer: 0 (1080 x 1920)
Using fbdev graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 80
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
IageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
=> Linking mtab
=> Processing recovery.fstab
Irocessing '/boot'
Irocessing '/cache'
Irocessing '/data'
Irocessing '/recovery'
Irocessing '/system'
Irocessing '/system_image'
Irocessing '/efs1'
Irocessing '/efs2'
Irocessing '/usb_otg'
I:Created '/usb_otg' folder.
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Setting up '/data' as data/media emulated storage.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/96b3692d'
I:Settings storage is '/data/media/0'
Iecrypt adopted storage starting
IageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
Updating partition details...
Iata backup size is 102MB, free: 51764MB.
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Unmounting main partitions...
Partition Logs:
/boot | /dev/block/sde18 | Size: 64MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/sde18
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/cache | /dev/block/sda3 | Size: 247MB Used: 11MB Free: 236MB Backup Size: 11MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/sda3
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/sda15 | Size: 54918MB Used: 102MB Free: 51764MB Backup Size: 102MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/sda15
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: f2fs
Fstab_File_System: f2fs
Backup_Method: files
MTP_Storage_ID: 65537
/recovery | /dev/block/sde21 | Size: 64MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/sde21
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/sde20 | Size: 2913MB Used: 1999MB Free: 914MB Backup Size: 1999MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/sde20
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system_image | /dev/block/sde20 | Size: 3008MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/sde20
Display_Name: System Image
Storage_Name: system_image
Backup_Path: /system_image
Backup_Name: system_image
Backup_Display_Name: System Image
Storage_Path: /system_image
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/efs1 | /dev/block/sdf1 | Size: 2MB
Flags: Can_Be_Backed_Up Has_SubPartition IsPresent
Primary_Block_Device: /dev/block/sdf1
Display_Name: EFS
Storage_Name: EFS
Backup_Path: /efs1
Backup_Name: efs1
Backup_Display_Name: EFS
Storage_Path: /efs1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/efs2 | /dev/block/sdf2 | Size: 2MB
Flags: Can_Be_Backed_Up Is_SubPartition IsPresent
SubPartition_Of: /efs1
Primary_Block_Device: /dev/block/sdf2
Display_Name: efs2
Storage_Name: efs2
Backup_Path: /efs2
Backup_Name: efs2
Backup_Display_Name: efs2
Storage_Path: /efs2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/usb_otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/sdg1
Alternate_Block_Device: /dev/block/sdg
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb_otg
Backup_Name: usb_otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb_otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65538
I:Loading package: TWRP (/data/media/0/TWRP/theme/ui.zip)
I:Loading zip theme
I:Loading package: TWRP (/twres/ui.xml)
I:Load XML directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/zh_TW.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/zh_CN.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/uk.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/tr.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sv.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/sk.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/ru.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/pt_BR.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/pl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/nl.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/ja.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/it.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/hu.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/fr.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/es.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/el.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/de.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/cz.xml' directly
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
IageManager::LoadFileToBuffer loading filename: '/twres/ui.xml' directly
I:Checking resolution...
I:Loading resources...
I:Failed to load image from indeterminate013, error -1
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Including file: /twres/portrait.xml...
IageManager::LoadFileToBuffer loading filename: '/twres/portrait.xml' directly
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page flashimage_confirm
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backup_options
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/data/media/0/TWRP/BACKUPS/96b3692d'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page system_readonly_check
I:Loading page reboot
I:Loading page system_readonly
I:Loading page settings
I:Loading page settings_timezone
I:Loading page settings_screen
I:Loading page settings_vibration
I:Loading page settings_language
I:Loading page advanced
I:Loading page partsdcardsel
I:Loading page partsdcardcheck
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageraction
I:Loading page decrypt
I:Loading page decrypt_pattern
I:Loading page trydecrypt
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page fixcontexts
I:Loading page installsu
I:Loading page slideout
I:Loading page select_storage
I:Loading page select_language
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
I:Not using /misc, not defined in fstab.
I:Not using /misc, not defined in fstab.
Startup Commands:
ro.cm.build.version.plat.rev=0
ro.cm.build.version.plat.sdk=5
ro.cm.device=oneplus3
ro.cm.display.version=13.0-20160804-UNOFFICIAL-oneplus3
ro.cm.version=13.0-20160804-UNOFFICIAL-oneplus3
ro.cm.releasetype=UNOFFICIAL
ro.com.google.clientidbase=android-oneplus
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.boot.mode=normal
ro.boot.angela=disabled
ro.boot.nobatt=0
ro.boot.secboot=enabled
ro.boot.selinux=permissive
ro.boot.baseband=msm
ro.boot.hardware=qcom
ro.boot.serialno=96b3692d
ro.boot.keymaster=1
ro.boot.bootdevice=624000.ufshc
ro.boot.hw_version=16
ro.boot.rf_version=21
ro.boot.veritymode=enforcing
ro.boot.pcba_number=001580206822032700016379
ro.boot.rpmb_enable=true
ro.boot.project_name=15801
ro.boot.enable_dm_verity=1
ro.twrp.boot=1
ro.twrp.version=3.0.2-1
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8996
ro.build.id=MMB29M
ro.build.date=Thu Aug 4 09:14:14 EDT 2016
ro.build.date.utc=1470316454
ro.build.host=build
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=jenkins
ro.build.flavor=cm_oneplus3-eng
ro.build.display.id=OnePlus3-eng 6.0.1 MMB29M 123bd1a616 test-keys
ro.build.product=OnePlus3
ro.build.selinux=1
ro.build.version.sdk=23
ro.build.version.base_os=
ro.build.version.release=6.0.1
ro.build.version.codename=REL
ro.build.version.incremental=123bd1a616
ro.build.version.preview_sdk=0
ro.build.version.all_codenames=REL
ro.build.version.security_patch=2015-12-01
ro.build.description=OnePlus3-user 6.0.1 MMB29M 42 dev-keys
ro.build.fingerprint=OnePlus/OnePlus3/OnePlus3:6.0.1/MMB29M/213690:user/release-keys
ro.build.characteristics=default
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Helium.ogg
ro.config.notification_sound=Argon.ogg
ro.dalvik.vm.native.bridge=0
ro.kernel.android.checkjni=1
ro.secure=0
ro.zygote=zygote64_32
ro.carrier=unknown
ro.cmlegal.url=https://cyngn.com/legal/privacy-policy
ro.display.series=OnePlus 3
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.name=OnePlus3
ro.product.board=MSM8996
ro.product.brand=OnePlus
ro.product.model=ONE A3003
ro.product.device=OnePlus3
ro.product.locale=en-US
ro.product.manufacturer=OnePlus
ro.baseband=msm
ro.bootmode=normal
ro.hardware=qcom
ro.revision=0
ro.serialno=96b3692d
ro.bootimage.build.date=Thu Aug 4 09:14:31 EDT 2016
ro.bootimage.build.date.utc=1470316471
ro.bootimage.build.fingerprint=OnePlus/OnePlus3/OnePlus3:6.0.1/MMB29M/123bd1a616:eng/test-keys
ro.alarm_boot=false
ro.bootloader=unknown
ro.debuggable=1
ro.modversion=13.0-20160804-UNOFFICIAL-oneplus3
ro.rommanager.developerid=cyanogenmod
ro.setupwizard.enterprise_mode=1
net.bt.name=Android
net.change=net.bt.name
sys.usb.ffs.ready=1
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.set_permissive=stopped
twrp.crash_counter=0
twrp.action_complete=0
debug.atrace.tags.enableflags=0
media.sf.omx-plugin=libffmpeg_omx.so
media.sf.extractor-plugin=libffmpeg_extractor.so
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
dalvik.vm.isa.arm64.variant=kryo
dalvik.vm.isa.arm64.features=default
dalvik.vm.usejit=true
dalvik.vm.lockprof.threshold=500
dalvik.vm.dex2oat-Xms=64m
dalvik.vm.dex2oat-Xmx=512m
dalvik.vm.dex2oat-filter=verify-at-runtime
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.image-dex2oat-Xms=64m
dalvik.vm.image-dex2oat-Xmx=64m
dalvik.vm.image-dex2oat-filter=verify-at-runtime
persist.sys.dun.override=0
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib.2=libart.so
persist.sys.root_access=0
persist.sys.recovery_update=false
service.adb.root=1
keyguard.no_require_sim=true
I:Copying file /cache/recovery/log to /cache/recovery/last_log
tw_get_context got selinux context: ubject_r:media_rw_data_file:s0
I:Got default contexts and file mode for storage files.
I:Attempt to load settings from settings file...
I:InfoManager loading from '/data/media/0/TWRP/.twrps'.
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/96b3692d'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/usb_otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 80
IageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:Translating partition display names
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/96b3692d'
I:TWFunc::Fixup_Time: Pre-fix date and time: 1970-05-04--14-23-23
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
Starting MTP
I:sending message to add 65537 '/data/media/0' 'Internal Storage'
I:Message sent, add storage ID: 65537
MTP Enabled
I:Check_Lifetime_Writes result: '351260'
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
created new mtpserver object
MtpServer::run fd: 19
mtppipe add storage 65537 '/data/media/0'
MtpStorage id: 65537 path: /data/media/0
I:Set page: 'mount'
I:Set overlay: 'select_storage'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'mount'
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 80
I:Set overlay: ''
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
Iperation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /data/media/0/recovery.log
Thank you!!!
Somehow, by some reason....
Somehow, by some reason, I installed the official recovery from OnePlus website and it started "wiping something" and triggering the bootloader to effectively load the FreedomOS.
What's the reason for that behavior? Is it a bug from TWRP that interfered with the bootloader (locking into recovery mode)?
@sylviohneto Thank you very much for mentioning me in this post so I could see it. I didn't even have to install the FreedomOS Recovery - I only ran it once using fastboot boot and now I am magically also able to boot into recovery and system normally. I wouldn't necessarily assume a bug in TWRP, but it's certainly possible. The latest TWRP page: https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391 suggests that it may be a security tool in the bootloader.
Warning to future users of this fix: It DOES wipe the data partition, as sykviohneto said it does. Oh well. I didn't like my data anyway...
Flash the latest version of twrp Recovery and it will solve the problem

Unable to flash ROM, can only access recovery, can't wipe or restore

I installed LineageOS 14.1 a few days ago, and it worked OK for one day. Then my phone froze and restarted, and got into a bootloop. So I tried reflashing the ROM, but TWRP never finished flashing. I tried wiping and it failed as well.
I can only access TWRP (3) recovery, can't wipe or flash ROMs. When I try to do it this is the error I get:
Code:
Failed to mount '/system' (Invalid argument)
Here is the recovery log in full after trying to flash a ROM (sometimes it just gets stuck and doesn't even let me save the log):
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 3.0.2-0 on Thu Jan 1 00:31:13 1970
(pid 201)
RECOVERY_SDCARD_ON_DATA := true
TW_NO_USB_STORAGE := true
TW_INCLUDE_CRYPTO := true
I:Found brightness file at '/sys/devices/f9967000.i2c/i2c-0/0-0036/backlight/lm3697/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:LANG: en
Starting the UI...Overlay graphics may work (mdssfb_80000), but not enabled. Use TW_TARGET_USES_QCOM_BSP := true to enable.
Skipping adf graphics -- not present in build tree
Skipping drm graphics -- not present in build tree
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 24 .length = 8
vi.green.offset = 16 .length = 8
vi.blue.offset = 8 .length = 8
setting GGL_PIXEL_FORMAT_RGBX_8888
double buffered
framebuffer: 3 (1440 x 2560)
Using fbdev graphics.
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Loading package: splash (/twres/splash.xml)
I:Load XML directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/splash.xml' directly
I:Checking resolution...
I:Scaling theme width 1.333333x and height 1.333333x, offsets x: 0 y: 0
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page splash
I:Switching packages (splash)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/boot'
I:Processing '/system'
I:Processing '/data'
I:Processing '/cache'
I:Processing '/recovery'
I:Processing '/efs1'
I:Processing '/efs2'
I:Processing '/external_sd'
I:Created '/external_sd' folder.
I:Processing '/usb-otg'
I:Created '/usb-otg' folder.
I:Setting up '/data' as data/media emulated storage.
I:Created '/sdcard' folder.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Setting up '/data' as data/media emulated storage.
I:mount -o bind '/data/media' '/sdcard' process ended with RC=0
I:mount -o bind '/data/media/0' '/sdcard' process ended with RC=0
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/LGD855ae064087'
I:Settings storage is '/data/media/0'
I:Decrypt adopted storage starting
I:PageManager::LoadFileToBuffer loading filename: '/data/system/storage.xml' directly
Updating partition details...
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk0p40 /system
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
I:exfat-fuse failed to mount with result 'FUSE exfat 1.2.2
', trying vfat
Failed to mount '/system' (Invalid argument)
I:Actual block device: '/dev/block/mmcblk0p40', current file system: 'vfat'
I:Data backup size is 0MB, free: 10926MB.
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Unmounting main partitions...
Partition Logs:
/boot | /dev/block/mmcblk0p18 | Size: 16MB
Flags: Can_Be_Backed_Up IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p18
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p40 | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p40
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: vfat
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p43 | Size: 26123MB Used: 0MB Free: 10926MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Be_Encrypted Has_Data_Media Can_Encrypt_Backup Use_Userdata_Encryption Is_Storage Is_Settings_Storage
Symlink_Path: /data/media/0
Symlink_Mount_Point: /sdcard
Primary_Block_Device: /dev/block/mmcblk0p43
Length: -16384
Display_Name: Data
Storage_Name: Internal Storage
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data/media/0
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
MTP_Storage_ID: 65537
/cache | /dev/block/mmcblk0p41 | Size: 598MB Used: 10MB Free: 588MB Backup Size: 10MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p41
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/recovery | /dev/block/mmcblk0p20 | Size: 16MB
Flags: IsPresent Can_Flash_Img
Primary_Block_Device: /dev/block/mmcblk0p20
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/efs1 | /dev/block/mmcblk0p21 | Size: 3MB
Flags: Can_Be_Backed_Up Has_SubPartition IsPresent
Primary_Block_Device: /dev/block/mmcblk0p21
Display_Name: EFS
Storage_Name: EFS
Backup_Path: /efs1
Backup_Name: efs1
Backup_Display_Name: EFS
Storage_Path: /efs1
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/efs2 | /dev/block/mmcblk0p22 | Size: 3MB
Flags: Can_Be_Backed_Up Is_SubPartition IsPresent
SubPartition_Of: /efs1
Primary_Block_Device: /dev/block/mmcblk0p22
Display_Name: efs2
Storage_Name: efs2
Backup_Path: /efs2
Backup_Name: efs2
Backup_Display_Name: efs2
Storage_Path: /efs2
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/external_sd | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: external_sd
Storage_Name: external_sd
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: external_sd
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65538
/usb-otg | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Removable Is_Storage
Primary_Block_Device: /dev/block/sda1
Alternate_Block_Device: /dev/block/sda
Display_Name: USB-OTG
Storage_Name: USB-OTG
Backup_Path: /usb-otg
Backup_Name: usb-otg
Backup_Display_Name: USB-OTG
Storage_Path: /usb-otg
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
MTP_Storage_ID: 65539
I:Loading package: TWRP (/data/media/0/TWRP/theme/ui.zip)
I:Loading zip theme
I:Loading package: TWRP (/twres/ui.xml)
I:Load XML directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/uk.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/tr.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sv.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sl.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/sk.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/ru.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/pt_BR.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/pl.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/nl.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/it.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/hu.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/fr.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/es.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/el.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/de.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/cz.xml' directly
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:PageManager::LoadFileToBuffer loading filename: '/twres/ui.xml' directly
I:Checking resolution...
I:Scaling theme width 1.333333x and height 1.333333x, offsets x: 0 y: 0
I:Loading resources...
I:Failed to load image from indeterminate013, error -1
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Including file: /twres/portrait.xml...
I:PageManager::LoadFileToBuffer loading filename: '/twres/portrait.xml' directly
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page flashimage_confirm
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backup_options
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page system_readonly_check
I:Loading page reboot
I:Loading page system_readonly
I:Loading page settings
I:Loading page settings_timezone
I:Loading page settings_screen
I:Loading page settings_vibration
I:Loading page settings_language
I:Loading page advanced
I:Loading page partsdcardsel
I:Loading page partsdcardcheck
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageraction
I:Loading page decrypt
I:Loading page decrypt_pattern
I:Loading page trydecrypt
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page fixcontexts
I:Loading page installsu
I:Loading page slideout
I:Loading page select_storage
I:Loading page select_language
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
I:Not using /misc, not defined in fstab.
I:Not using /misc, not defined in fstab.
Startup Commands:
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=true
ro.com.android.wifi-watchlist=GoogleGuest
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.boot.emmc=true
ro.boot.baseband=msm
ro.boot.hardware=g3
ro.boot.serialno=LGD855ae064087
ro.boot.dlcomplete=0
ro.emmc=0
ro.omni.device=d855
ro.omni.version=4.4.4-20160528-d855-HOMEMADE
ro.twrp.boot=1
ro.twrp.version=3.0.2-0
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=
ro.build.id=KTU84P
ro.build.date=Fri May 27 20:25:07 EDT 2016
ro.build.date.utc=0
ro.build.host=build
ro.build.tags=test-keys
ro.build.type=eng
ro.build.user=jenkins
ro.build.display.id=omni_d855-eng 4.4.4 KTU84P 9 test-keys
ro.build.product=d855
ro.build.version.sdk=19
ro.build.version.release=4.4.4
ro.build.version.codename=REL
ro.build.version.incremental=9
ro.build.description=omni_d855-eng 4.4.4 KTU84P 9 test-keys
ro.build.fingerprint=LG/omni_d855/d855:4.4.4/KTU84P/9:eng/test-keys
ro.build.characteristics=default
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Argon.ogg
ro.config.notification_sound=pixiedust.ogg
ro.kernel.android.checkjni=1
ro.secure=0
ro.carrier=unknown
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=omni_d855
ro.product.board=d855
ro.product.brand=LG
ro.product.model=G3
ro.product.device=d855
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=LG
ro.baseband=msm
ro.bootmode=unknown
ro.hardware=g3
ro.revision=10
ro.serialno=LGD855ae064087
ro.bootloader=unknown
ro.debuggable=1
ro.modversion=OmniROM-4.4.4-20160528-d855-HOMEMADE
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
net.bt.name=Android
net.change=net.bt.name
init.svc.adbd=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.set_permissive=stopped
twrp.crash_counter=0
twrp.action_complete=0
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.sys.usb.config=adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.root_access=1
service.adb.root=1
keyguard.no_require_sim=true
I:Copying file /cache/recovery/log to /cache/recovery/last_log
tw_get_context got selinux context: u:object_r:media_rw_data_file:s0
I:Got default contexts and file mode for storage files.
I:Attempt to load settings from settings file...
I:InfoManager loading from '/data/media/0/TWRP/.twrps'.
I:InfoManager file version has changed, not reading file
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/LGD855ae064087'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:PageManager::LoadFileToBuffer loading filename: '/twres/languages/en.xml' directly
parsing languageFile
parsing languageFile done
I:Translating partition display names
I:Backup folder set to '/data/media/0/TWRP/BACKUPS/LGD855ae064087'
I:TWFunc::Fixup_Time: Pre-fix date and time: 1969-12-31--19-31-16
I:TWFunc::Fixup_Time: Setting time offset from file /sys/class/rtc/rtc0/since_epoch
I:TWFunc::Fixup_Time: will attempt to use the ats files now.
I:TWFunc::Fixup_Time: no ats files found, leaving untouched!
I:Enabling MTP during startup
I:Starting MTP
I:sending message to add 65537 '/data/media/0' 'Internal Storage'
I:Message sent, add storage ID: 65537
Starting MTP
MTP Enabled
I:Switching packages (TWRP)
I:Set page: 'system_readonly'
created new mtpserver object
MtpServer::run fd: 22
mtppipe add storage 65537 '/data/media/0'
MtpStorage id: 65537 path: /data/media/0
I:Is_Mounted: Unable to find partition for path '/vendor'
I:operation_start: 'Toggle System Mount'
I:operation_end - status=1
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set overlay: 'select_storage'
I:cmd: /sbin/exfat-fuse -o big_writes,max_read=131072,max_write=131072 /dev/block/mmcblk1p1 /external_sd
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT,M3.2.0,M11.1.0!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
WARN: volume was not unmounted cleanly.
I:Backup folder set to '/external_sd/TWRP/BACKUPS/LGD855ae064087'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:operation_start: 'Flashing'
Installing zip file '/external_sd/lineage-14.1-20170130-nightly-d855-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
Checking for BASEBAND version 21C
Checking for BASEBAND version 21CTarget: lge/g3_global_com/g3:6.0/MRA58K/15351124649f4:user/release-keys
Target: lge/g3_global_com/g3:6.0/MRA58K/15351124649f4:user/release-keys
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
run_program: child exited with status 127
unmount of /system failed; no such volume
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
unmount of /system failed; no such volume
Creating filesystem with parameters:
Size: 2164260864
Block size: 4096
Blocks per group: 32768
Inodes per group: 7776
Inode size: 256
Journal blocks: 8256
Label:
Blocks: 528384
Block groups: 17
Reserved block group size: 135
Created filesystem with 11/132192 inodes and 17377/528384 blocks
warning: wipe_block_device: Wipe via secure discard suppressed due to bug in EMMC firmware
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
detected filesystem exfat for /dev/block/platform/msm_sdcc.1/by-name/system
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
mount: failed to mount /dev/block/platform/msm_sdcc.1/by-name/system at /system: No such device
created [/system/etc/firmware/wcd9320]
created [/system/priv-app/MtpDocumentsProvider/lib]
created [/system/priv-app/MtpDocumentsProvider/lib/arm]
created [/system/app/Bluetooth/lib]
created [/system/app/Bluetooth/lib/arm]
created [/system/app/BluetoothExt/lib]
created [/system/app/BluetoothExt/lib/arm]
created [/system/priv-app/CMAudioService/lib]
created [/system/priv-app/CMAudioService/lib/arm]
created [/system/priv-app/DefaultContainerService/lib]
created [/system/priv-app/DefaultContainerService/lib/arm]
created [/system/priv-app/FMRadio/lib]
created [/system/priv-app/FMRadio/lib/arm]
created [/system/priv-app/Gallery2/lib]
created [/system/priv-app/Gallery2/lib/arm]
created [/system/app/LatinIME/lib]
created [/system/app/LatinIME/lib/arm]
created [/system/app/PacProcessor/lib]
created [/system/app/PacProcessor/lib/arm]
created [/system/app/Terminal/lib]
created [/system/app/Terminal/lib/arm]
created [/system/app/NfcNci/lib]
created [/system/app/NfcNci/lib/arm]
created [/system/app/PrintSpooler/lib]
created [/system/app/PrintSpooler/lib/arm]
created [/system/app/Eleven/lib]
created [/system/app/Eleven/lib/arm]
created [/system/app/PicoTts/lib]
created [/system/app/PicoTts/lib/arm]
ApplyParsedPerms: lsetfilecon of /system/xbin/zcat to u:object_r:system_file:s0 failed: Operation not supported on transport endpoint
ApplyParsedPerms: lsetfilecon of /system/xbin/zcat to u:object_r:system_file:s0 failed: Operation not supported on transport endpoint
script aborted: set_metadata_recursive: some changes failed
set_metadata_recursive: some changes failed
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '/external_sd/lineage-14.1-20170130-nightly-d855-signed.zip'
Updating partition details...
I:Data backup size is 0MB, free: 10926MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'vfat'
...done
I:Set page: 'flash_done'
I:operation_end - status=1
I:Set overlay: 'slideout'
I:Set overlay: ''
I:Set page: 'clear_vars'
I:Set page: 'install'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:operation_start: 'Copy Log'
I:Copying file /tmp/recovery.log to /external_sd/recovery.log
Please help, thanks!
I was able to format it and now it sort it works!

Categories

Resources